False wall in the bathroom. How to hide pipes in a bathroom without mounting them into the wall. Decorative boxes and niches

The question of how to hide pipes in the bathroom without mounting them into the wall worries almost every real estate owner who is faced with the "delights" of old-style domestic housing construction. Yes, in most new modern multi-apartment buildings this problem is largely solved by pre-planned indoor installations. In this case, the appearance of the bathroom does not deteriorate with ugly pipes, the general aesthetics of the room is preserved, beautiful and expensive repairs can be made - and it is quite reasonable to expect an impressive result. But what about the opposite? Do not sprinkle ashes on your head - the problem is much easier to solve than you think, and for this you do not need to reshape the family budget or master some new skills.

What you need to know before installation

Each detail in any mechanism has its own purpose. In this regard, pipes can also be perceived as elements of a single and well-oiled system. A system that sooner or later may fail, which means that prompt access to pipes is not a wish, but a necessity. There are a number of comments from specialists that you should listen carefully to if you want to cope with the operation correctly:

• if there are any threaded connections, taps, etc. on the pipes, then for any selected type of masking of communications, quick access to them should be provided;
• when installing a mandatory decorative box or sheathing pipes with plastic panels, provide for the creation of an inspection hatch;
• metal-plastic communications have connections - the so-called fittings - which are regulated by keys, these areas need constant monitoring on your part and the possibility of prompt intervention in case of leakage;
• do not place pipe inspection hatches in places where there are no connections - the chance of leakage in these areas is so minimal that it should not even be taken into account;
• immediately before installation, you should carefully check all communications - and correct any noticed defects before installing a false wall or box;
• to prevent the formation of condensation, it is recommended to insulate the water and sewer pipes.

Remember that the functionality of well-established engineering communications in the bathroom should not be sacrificed for decorativeness. A reasonable balance is always somewhere in the middle, and adherence to the simple rules mentioned above will help you not only beautifully cope with the problem of visible pipes, but also maintain confidence in their reliable functioning.

All ways to mask pipes

Let's try to list the most common ways to mask sewer and water pipes in the bathroom. There are both the simplest options, which one would like to call elementary, and a little more complicated, requiring sequential editing.

1. decorative mosaic;
2. polyurethane "stucco";
3. metal grates;
4. moisture resistant bathroom furniture;
5. roller shutters;
6. decorative boxes and niches.

Decorative mosaic

• suitable for gluing large and wide elements;
• you can choose any color and texture in accordance with the interior design in the bathroom;
• quite high cost.

A way that is not a sin not to use if, for example, you need to beautifully and quickly close a sewer riser, a wide pipe. In all other cases, it reveals its unsuitability due to the complexity of working with the material itself - pieces of decorative mosaic made of ceramics, natural stone or glass. As an unconditional plus - a huge number of options, so no matter how refined and non-trivial your bathroom is, we can say with confidence that choosing a mosaic for it is a matter of a short time.


Take a look at how you can mask the pipes in the bathroom with decorative mosaics. It's even hard to guess where the pipes are hiding in the photo below. And they are.


This method of decoration can be used not only in bathrooms, although wooden mosaic is better for this.

Polyurethane "molding"

• base material - polyurethane;
• skillfully imitates real clay stucco;
• gives the room a noble look;
• location specifics;
• easily dismantled.

Even in the event of a leak, it is sufficient to simply replace a whole fragment of such a structure without any aesthetic loss. One of the disadvantages of this option is that it does not always look appropriate, especially in the format of a high-tech bathroom. In addition, the nature of the placement of pipes also matters: if in a vertical position, polyurethane stucco molding effectively and beautifully emphasizes the interior, then in a horizontal position all the organic matter of integration disappears and the structure looks at least ridiculous.

Metal grilles

• stainless steel or chrome plated;
• used in combination with a frame;
• affordable price;
• fit perfectly into modern bathrooms.

It is quite a sober and relevant solution if you want to hide pipes in the bathroom, but there is no desire to mount them directly into the wall. Don't look for a special decorative revelation here - and where does it come from? Perhaps this is the most practical and functional option that will not hurt your wallet. And you can find the answer to another topical question on sealing the gap between the bathroom and the wall in the article of the same name: "How to seal the gap between the bathroom and the wall."

Moisture resistant bathroom furniture

• perfectly retains performance in high humidity conditions;
• made of painted or laminated chipboard;
• perfectly combines practicality and decorativeness;
• requires the necessary space in the room;
• sometimes the price is quite high.

However, what a sin to conceal: good bathroom furniture really costs a lot. Take the same sets of the famous Spanish brand Roca : a convenient hanging cabinet-pencil case from the limited collection Victoria will perfectly cover unnecessary water pipes, but will require unloading the family budget for 12 thousand rubles ... But at your disposal there will also be a lot of space for towels, bottles and all sorts of other things on the shelves. Some cabinets or pencil cases are equipped with a spacious laundry basket, which saves space.

Roller shutters

• recommended for use in niches;
• elementary installation;
• blinds and shutters;
• protection against noise in communications;
• attractive appearance;
• break easily;
• provide quick access to key nodes.

The main problem of roller shutters is that they lose their laconic and attractive appearance at the first insignificant mechanical impact. Alas, they are made of light and brittle materials that simply cannot withstand pressure from outside. But on the other hand, the advantages should be written down to the low cost, which for many owners is almost the main priority.

Decorative boxes and niches

• require the installation of the frame;
• not recommended for use in small bathrooms;
• drywall or plastic is used;
• reliable moisture resistance;
• low price.

Probably the most popular option today, which is especially recommended for premises with a good supply of free square meters. At the same time, it is also the most difficult, since it will be necessary to construct a frame. All stages of the installation of plasterboard boxes - below.

Features of mounting a plasterboard box

A bathroom is a room in which high humidity is constantly observed. This means that drywall to create a box should be moisture-resistant. It is generally available commercially in green sheet format.
Drywall itself has many advantages as a reliable and environmentally friendly finishing material:

• easy to cut;
• forms an aesthetically pleasing and durable surface;
• allows you to create a reliable and safe false wall or partition;
• goes well with plaster or ceramic tiles.

What do you need?

• profiles;
• moisture resistant drywall;
• silicone sealant;
• screws;
• dowels;
• puncher.

What is the secret to successfully installing a drywall masking box in the bathroom? Strict adherence to the detailed installation diagram presented below will help you quickly and efficiently hide the pipes in the bathroom, without mounting them into the wall:

1. Think in advance how the box will look like, make sketches on paper, give your notes the appearance of a clear and well-thought-out scheme;
2. take the necessary measurements to find out how much material you need;
3. calculations are made to determine the required amount of materials;
4. at the points of contact of pipes with the wall, using a perforator and dowels with screws, fix the guide profiles - this way you will set the boundaries of the frame of your future structure;
5. fix the same profiles on the floor and ceiling - for perfect fixation of the top and bottom of the box;
6. install the corner external profile and secure it with stiffeners for stability, they can be made from the same guide profiles by connecting the corner profile with the obtained fragments with the one that is fixed on the wall;
7. sheathe the frame with drywall, cutting out the necessary fragments with a knife and inserting between the profiles;
8. after sheathing, treat all joints with a sealant;
9. it remains only to finish the surface of the box - paint, plaster, cover with ceramic tiles.

If your bathroom walls are covered with facing tiles, then you can finish the box in the same way. So the resulting design will look organically in the bathroom interior and will not visually take up a lot of space.


By the way, drywall sheets in the bathroom can be successfully replaced plastic panels... True, the strength of the material speaks in favor of the former. Plastic, with all its advantages, is still a much more fragile material.



It seems that this way of hiding pipes in the bathroom is the most difficult, but if you figure it out, then there is nothing complicated about it: consistent implementation of all installation points will lead you to a good result .



For better clarity, here are a few videos from professionals.

Renovating a bathroom is not an easy task, it is necessary to provide for many things, and among them - how to hide pipes. If in new buildings this problem is not so urgent, then in Khrushchev, pipes spoil the interior, and it is worthwhile to think carefully about how to hide them.

In order for the interior of the bathroom to please and at the same time remain functional, it is necessary to take into account every little detail. It is a matter of taste to hide pipes in a wall, a specially mounted box made of plasterboard or plastic panels, but care must be taken to ensure access to them in case of an emergency.

When planning renovations in the most essential and multifunctional room, have you ever wondered what can spoil the look of any bathroom the most? This is not about scattered towels and other mess, and not even about the correct design.

Sewer and water pipes passing along the walls become covered with moisture, darken, plus the unpleasant noise of flowing water or excess pressure in the pipes.

The times when bathroom renovations were limited to painting the walls and the bathroom cabinet are long gone. I would like to give the hygiene room some style and the protruding pipes do not go well with this style.

We will not reinvent the bicycle, there are several proven ways to hide pipes in the bathroom.

Mounting pipes in the wall is the ideal way to seal pipes in a bathroom, especially for a new bathroom.

First, let's define what kind of layout we need. There are usually three points of water inlet and outlet in the bathroom:

• sink
• bath
• and a washing machine.

The proposed pipe exits must be marked on the wall.

With the plumbing, everything is simple, but when installing the sewage system, it must be taken into account that the pipes are inclined towards the riser in the toilet.

The lower point of the drain is the bathroom, the pipes from the sink and the washing machine are adjacent to the sink in the bathroom. The most distant point is the washing machine.

Before you brick the pipes in the wall, you need to figure out for which types of pipes and their connections this method can be used. If possible, it is better to replace cast-iron pipes with metal-plastic ones.

They hide in the walls:

• Steel pipes connected by welding.
• Brazed copper.
• Proven clamped press fittings on metal-reinforced plastic.
• XLPE fittings.

They don't hide in the walls:

• Threaded connections of any pipes (cast iron, metal-plastic).
• Threaded fittings on metal-plastic.

Water finds its way in the weakest connections. And if it is difficult not to notice a clear threat, then the fitting, closed in the screed, under the tile, will first "warn" the neighbors about the repair of their bathtub at your expense. And to eliminate the accident at home is like organizing a new bathroom renovation.

When planning a repair, draw up a wiring diagram. The shorter the path from the pipe to the mixer and the fewer bends the better.

You need to pay attention to:

• Pipe diameter.
• Screed layer, reinforcement, waterproofing.
• Wall type, suitability for curling.
• Pipe route.

Installation of pipes in the wall involves curling. This option is not suitable for:

• Horizontal curtain of panel walls.
• Storming thin brick walls (half a brick).

On the walls, non-capital communications can be laid in grooves (grooves), and on the floor - in a screed. The warranty period is 50 years, especially since today's pipes do not sweat or rust. The groove can be cut with a grinder or made with a chisel.

When the wall is made of plasterboard, the wiring is done before installing the panels. Cutting holes if necessary is easy. When routing, take into account the thickness of the tile or sheet.

The next stage is the plastering of the pipes. Now you can veneer.

When the place behind the bathroom is not tiled, the pipes from the washing machine can not be hidden into the wall, but attached to the wall with clamps. The holes for the pipes must be taken into account exactly and adjusted so that there are no large gaps, and the mixer closes them. Facing the bath, we close the access to the siphon with a hatch.

Plasterboard boxes

With a non-standard bathroom area, you can do some redevelopment and hide the pipes under the drywall. Under the low podium for the bath, you can hide all the wiring.

How to close the pipes in the bathroom with drywall?

The pipe boxes in the bathroom are sheathed with moisture-resistant plasterboard or plastic panels. For the frame, you can take wooden blocks 30 × 40, treated with impregnation 2 times or a metal profile and fix it with self-tapping screws. Outside, the frame is closed with plasterboard with a door or panel for approaches to the riser and valves.

For access to the cranes - inspection hatches, usually buy 200 × 300 - the width of the tile; to the filter system - two hatches 600 × 600.

The box can be painted, pasted over with foil or tiles.

Under the tiles

A more solid option would be to tile closed pipes. To do this, we prepare a base in the form of two frames made of thin wooden slats. The length of the first frame is equal to the length of the area to be closed, and the width is equal to the width of the tile.

For the second frame, the length is the same, the width decreases by the thickness of the rail.

The frames are connected to each other by the sides. The resulting structure is sheathed with plywood or other lightweight material. A grid is laid on top - the base for the tiles.

Support bars must be fixed behind the pipes: they measure the required length and wedge it between the pipes and the wall. We put on the manufactured casing on the pipes.

Disguise behind furniture

How to decorate or mask pipes in the bathroom?

Another idea of ​​how to hide the sewer pipes in the bathroom will be suggested in furniture showrooms where bathroom sets are sold. In modern, stylish cabinets and nightstands, it is enough to cut holes to hide the laid pipes.

But where the pipes are always high humidity, this is an additional condition when buying a headset. You can treat the edges of the holes with moisture-proof materials or provide the bathroom with additional ventilation and microclimate control.

The hygienic organization of the bathroom space requires a special approach. Mounting methods can be combined, but do not lay pipes where self-tapping screws can get into them!

Before finishing, all the tracks must be transferred to paper with an indication of the dimensions, or at least photographed so that in the future there will not be a nail under the hanger.

Beauty is important, but engineering communications allow concealed installation only when you are sure of its quality.

When renovations are started in the bathroom, there is a chance to hide unsightly-looking communications, making the interior more attractive. However, if you intend to hide the pipes, it is important to leave the opportunity to inspect and repair them. And there are several ways to solve this problem.

Why hide pipes

The bathroom is an important part of the house or apartment, which is always sought to give a cozy and beautiful look. But even the most high-quality and fashionable repairs will not bring joy if pipes and other communications remain in sight. In addition, drops of water often collect on unmasked pipes due to the high humidity in the room. The result will be darkening of the pipes over time.

Competent pipe disguise is a must for repairs, it will make the room neat, and its design stylish and modern.

What pipes are installed in the bathroom

Depending on their purpose, the pipes in the bathroom can be related to the plumbing system, heating, as well as sewage. The layout of the water supply pipes is more convenient for installation and replacement, but when working with sewer pipes, you should always remember about the inclination provided in them towards the riser. If the bathroom has a heating radiator, then the issues of masking pipes will also affect those related to the heating system.

In addition to their purpose, pipes in the bathroom differ in their material. Nowadays it is rare to find metal pipes, since modern plastic pipes have many advantages. They are convenient to install, do not need to be painted, and are easy to replace. Such pipes are lightweight, corrosion resistant.

Often, sufficiently strong and thick polypropylene pipes are used for pipes in the bathroom. PVC products are distinguished by less thick walls, although they are attractive in price. However, they do not cope well with high temperatures and water pressure. If you chose to install them in the bathroom, be prepared for short-term use and do not hide them tightly.

In addition to polymer pipes, metal-plastic and steel welded pipes are often installed in bathrooms, but these are more expensive options.

What can and cannot be hidden

If a tightly closed pipe masking is planned, you need to understand that not all communications should be hidden in this way. First of all, it is not suitable for masking fittings - connections in the form of the letters X, T or G. These are the points where the risk of leaks is increased. Also, the places where the meters, cleaning filters and other connections are located are not tightly closed.

Steel pipes with welded joints, as well as brazed copper pipes, can be embedded in the wall. It is not recommended to hide all threaded pipe connections in walls without the ability to quickly access them.

Disguise rules

First, when installing pipes in the bathroom, try to reduce the number of connections. Competent wiring and thoughtful arrangement of equipment will help to achieve this.

Secondly, if connections are provided, they must be of the same material from which the pipes are made. It is important that their safety factor is identical or higher.

Thirdly, for quick access to valves, meters, taps and other elements, special hatches should be left.

Fourth, to prevent condensation from forming on the pipes, use insulating materials. If the pipes are hidden in the wall, the presence of insulation will allow the pipes to expand (this is especially important for pipes through which hot water flows).

Disguise methods

Various methods are used to hide communications in the bathroom. With the help of additional work, horizontally located pipes are hidden in the walls, performing strobing, and then finishing the surface with tiles or plaster. Also, pipes are often hidden in a box, the structure of which is made of plasterboard or plywood, choosing a material that is resistant to moisture. Such a box can be finished with tiles or other material.

To hide pipes, structures can also be created that are externally similar to furniture cabinets. Pipes in such cabinets take up only part of the space, and the remaining area of ​​the shelves is used for storing household items. Installation of roller shutters in the bathroom is also a popular option. By choosing a pretty decor, they will even decorate the room. And there is always an option for creative people - to paint pipes, cover them with mosaics, use artificial plants, stucco or other ideas.

Hiding in the wall

It is recommended to hide in the walls only pipes made of copper or polypropylene - firmly welded or soldered, without threaded connections. In this way, horizontally running pipes can be aesthetically hidden. They are preliminarily placed in a corrugation, then, after strobing, they are laid into the wall and processed from above with a concrete or cement screed. On the dried screed, you can lay laminate, tiles and other coverings.

It is important that the screed is completely dry before using the pipes. If you turn on hot water while the screed is damp, the coating will crack. The method is quite costly both in terms of strength and time (requires a lot of preparation). It is often chosen for new apartments (when renovating "from scratch") or in case of redevelopment. To implement it, you need to use a grinder, chisel, hammer and other tools.

Before you start strobing, it is important to draw up a wiring diagram on paper that will be most optimal for your bathroom. When drawing up such a scheme, take into account the route and diameter of the pipes, as well as the features of the walls (whether they are suitable for grooving, what thickness, whether reinforcement is needed, what will be the thickness of the screed). In the right places (adapters, taps, meters, threads), viewing windows are arranged.

Remember that horizontal slitting is not done in panel walls. Also, such manipulation is not carried out with a wall width of half a brick.

Drywall box

For this method, use a moisture-resistant version of drywall. The popularity of this method of camouflage is due to its simplicity and manufacturability, as well as financial affordability.

Drywall helps to hide not only pipes, but also the entire sewage system, however, a significant drawback is a decrease in usable area, which is an acute problem for small bathrooms.

Most often, a plasterboard box is installed in new buildings, where the bathrooms are more spacious than similar rooms in "panels" or "Khrushchevs".

The base of the box is a metal profile or a frame made of wooden blocks. It is sheathed with plasterboard, which is then finished to taste.

To access certain parts of the wiring, holes are made in the drywall, on which the doors of the inspection hatches are installed.

Disguise with furniture and screen

A practical option to hide pipes in a bathroom is to create a furniture structure. With its help, the interior can look richer and more attractive. Typically, this design is a cabinet with shelves.

For vertically arranged pipes, the option of a ready-made pencil case is suitable, in which the back wall is taken away, and a place for the pipes is cut out in the shelves. However, finding furniture that can stay in contact with wet pipes for a long time and not deteriorate is not easy. And treating all surfaces of the purchased cabinet with a moisture protection agent will spend your money and time.

Therefore, more often in the case of disguising communications with furniture, the structure is created independently or on order.

Moisture-resistant laminated chipboard is often chosen as a material for the manufacture of bathroom furniture. Doors in such a cabinet are chosen depending on the location of the plumbing - sliding or hinged. Having installed the structure, all the cracks are treated with silicone for greater tightness.

Another method of disguise, which can be called easy and practical, is to use a special screen. This is a frame in which plasterboard or plastic panels are fixed on 2 guides. Such a screen is inexpensive and looks pretty. It can be easily removed, simplifying repairs, but its disadvantage is the same as that of a drywall box - a decrease in the area of ​​the room.

Bath podium

This is an interesting solution for masking communications that does not take up useful space. Since most pipes run closer to the floor, a small step is enough to hide the plumbing. For such a podium, chipboard is used with treatment with moisture-repellent materials.

Roller shutters

Their main advantage is the possibility of easy full access to pipes, filters, meters and the rest. Roller shutters for toilet and bathroom come in different materials. They are the best option if the pipes run in a niche. It is worth installing them during repair work, then you will avoid unnecessary costs.

Advantages and disadvantages

In the case of camouflage in the wall, the minus will be possible restrictions for the work, since horizontal strobing in a panel building and work with thin walls are prohibited. Also, if unsuitable and low-quality pipes are hidden in the wall, there is a risk of a breakthrough and flooding of neighbors. Even if you make observation windows, access to communications will still be limited.

The advantage of the option to hide pipes in the walls is the aesthetics of the bathroom. You can finish the hidden pipes on top as you like, for example, tiling. Plus, it won't reduce your workspace.

The option with a plasterboard box also limits access for repairs or checking communications. To replace the pipes, the box will have to be completely dismantled, and after repair it will have to be reinstalled. In addition, installing the box will take valuable centimeters of space in the bathroom.

By choosing roller shutters, on the contrary, you will get maximum access. This is a practical and highly mobile option. But, since rather soft materials are used for their manufacture, roller shutters are easy to damage (bend or break) if you lean or hit.

The disadvantage when camouflaging pipes with furniture is contact with moisture. Even waterproof material deteriorates over time, and in order to prolong the life of the bathroom furniture, it should be wiped dry frequently. Silicone-treated areas in such furniture should always be checked (so that the silicone layer is not broken). Scratching should also be avoided. The advantages of using furniture as a way to hide pipes are the attractive appearance of the room, as well as practicality, because you can store various accessories in the closet.

In any room of the apartment, where water is supplied, there are a number of pipes, which, by their presence, spoil the overall picture of the design. Therefore, in each project of an apartment or house, builders and designers use different techniques to hide pipes and communications.

How and why to hide pipes in the bathroom

So why hide pipes? The answer is simple.

From a purely aesthetic point of view, I don't want to see plastic or metal pipes in a luxurious bathroom, lined, for example, with Italian tiles.

But, in addition to beauty, we must not forget about practicality, and therefore everything must be done so that the pipes are not visible, but at the same time, are easily accessible in case of problems with the water supply or sewage system.

Competent disguise of economic communications sets itself precisely such a goal - beauty and functionality.

How to hide pipes in the bathroom

There are four objects in the bathroom that require piping:

• bath;
• wash basin;
• toilet bowl;
• Washer.

And each of these facilities requires a separate water supply and sewerage system. Therefore, the placement of all plumbing facilities, which they all are, need to be thought about in advance.

It is ideal to think over everything at the stage of reconstruction of the premises in order to correctly, correctly and conveniently conduct all communications to them. These issues need to be discussed together with the builders and the designer, if you are not doing the project yourself. Only in such a tandem can you understand what, how and where to place it correctly.

After you have figured out where and what you will place, you need to decide on how exactly you want to hide the pipes. There are several options.

INSTALL PIPES IN THE WALL

Mounting pipes into a wall is the most aesthetically accurate method. Practically speaking, pipes embedded in the wall become practically inaccessible.

This method will require a lot of effort to implement it, because in order to hide a pipe in a wall, you need to drill special grooves and lay pipes in them. You will also need holes for wider sewer pipes.

Please note that only polypropylene, plastic and copper pipes are suitable for this type of gasket. The method by which the pipe joints need to be connected is welding or soldering.

There is one more trick - before laying pipes, provide them with thermal insulation with a pipe insulation. It will protect the pipes from condensation when they are already inside the walls, and will also allow the pipes to expand, which inevitably happens with any pipes over time.

When installing pipes in a wall, ensure that you have access to at least the pipe joints. Otherwise, if you need to get to them, you will have to break down the walls. There are a large number of options for doors and hatches that are built into the wall in order to open access to communications.

An interesting solution for the bathroom - it was placed on a dais, in which all the pipes were hidden, and a hatch for communications was brought out on the side. Nice, practical and comfortable

BUILD A SPECIAL PIPE BOX

A special pipe box - the method has taken root very well in many bathrooms in Russia. And this is not surprising, because the box, on the one hand, looks like a cabinet, and on the other, it does not block access to the pipes.

Also, the boxes have several significant advantages over the same wall mounting - you can hide large, large pipes in it, for example, like a sewer riser.

In addition, the box allows you to place a water heater and shelves inside itself, on which you can store household items and detergents for cleaning the bathroom and toilet. Also, this method is just perfect for a bathroom, in which all pipes are located behind the toilet along the wall.

The box for pipes can be made of plasterboard, chipboard panels.

As for chipboard and wood, the first should only be moisture resistant, and the second should have an impregnation that will protect the wood from moisture.

It is best to first replace the old pipes with new ones so that they do not spoil the box due to condensation. Or at least put an insulating cover on the pipes that will prevent it from forming.

The box has one significant drawback - in the event of a leak or other problems, you will have to disassemble it all, so you need to take care of the quality of the pipes and their connections in advance so that you do not have to do the repairs again later.

HIDE COMMUNICATIONS IN FURNITURE

Placing pipes in furniture is just as convenient as in a box. Visually, nothing is visible, but always at hand and in easy accessibility.

But in the case of pipes in furniture, you need to be sure of the quality of the pipes and joints with which they were connected. Otherwise, the cabinet or cabinet is damaged and cannot be restored. Therefore, you have a choice - either replace the old pipes with new ones, or leave them open.

An increasingly popular idea lately is wall-hung washbasin cabinets. Very fresh and stylish

In this case, it was possible to combine three in one. In one curbstone, they managed to immediately place pipes to the sink, toilet and, along the way, hid communications for the shower stall

FALSE CABINETS OR CURTAINS FOR PIPE COVERING

False cabinets or curtains for covering pipes are rather decorative. After all, it is convenient in that it does not require a lot of investment and time for its implementation.

You only need to choose the curtain you like and hang it in the washbasin frame.

This solution looks very cute and is perfect for a shabby chic or country kitchen. And besides, in the event of a pipe leak, you can immediately notice the problem and fix it.

A door with false drawers, behind which the washing machine is actually hiding, along with all communications. Original and convenient

So, we have reviewed 4 simple and affordable ways with which you can easily hide water and sewer pipes away from the eyes of residents and guests of your home.

Observing the simple rules for the installation and quality of pipes, boxes and boxes will serve you for many years without requiring replacement and repair.