Making a coffee table top with your own hands. A do-it-yourself coffee table is a creative design for decorating a home interior. A table from old furniture - a wardrobe or drawers from a chest of drawers

A coffee table is a decoration and a highlight of the interior. A hand-made item is doubly appreciated. It can be made from wood, glass, plastic and other materials. It's not difficult at all. You need blueprints and a little patience. A beautiful table will become a place where you can relax and read the press or sit with friends over a cup of tea. Step-by-step instructions with a photo will simplify the manufacturing process.

Preparatory work

In order to make a coffee table yourself, you will need not only drawings, but also materials with tools. Stock up on the following building supplies:

wood (solid wood);
water-based varnish for coating;
solvent;
acrylic paint;
brushes;
self-tapping screws;
jigsaw;

screwdriver;
grinder;
milling cutter;
drill.

As for wood, the best choice would be an array of pine with a thickness of 2.5 cm. In accordance with the drawing, the parameters of the coffee table, which is planned to be made by hand, are equal to 1.5 mx 0.5 m.

Attention! Separate legs are not required for the table.

Varnish is necessary to cover the finished structure, in total it will need about 0.3 liters. Acrylic paint is best purchased with shine. With its help, you can give an unusual look to an interior item. The assembly of the table will be done by means of self-tapping screws. Their size should be 4 x 60 and 4 x 40 mm. As for the rest of the tools and materials, there are no special requirements for them.

Installation features

The first step in making a coffee table is the selection of drawings and cutting out the corresponding parts. Suitable schemes can be found on the Internet or you can compose yourself.

Attention! Ready-made drawings are much easier to use and the process of making a table will be completed faster.

So, when all the details are ready, you can start assembling the future interior decoration.

All joints and roughness of wooden parts must be primed. This can be done with wood glue or PVA. Then let all components dry completely.

The planks and legs should be fastened with self-tapping screws specified in the list of required materials.
The guminess of the coffee table can be easily removed with a solvent. White spirit remains the most popular remedy. A dry cloth should be moistened with a little product and wiped on the table surface.

Advice. Do these manipulations in an open space, because in the apartment this smell will not disappear soon.

The table is almost ready. But it needs to be decorated. To do this, you need to mix varnish and acrylic paint with shiny splashes. Cover the entire surface of the table.
After the paint and varnish have dried, the coffee table can be placed indoors and used for its intended purpose.

Wooden box table

This is the easiest and most original way to make a decorative table. A handmade designer item will rightfully take place in the living room or bedroom. To make a table, you will need wooden boxes. It is wooden, not plywood. Wood has good performance, which cannot be said about plywood.

But still, this material is also required for a coffee table from drawers. Take a few minutes for the instructions and you will definitely succeed!

Prepare a sheet of plywood. This is done in order not to make the structure heavier. Wooden boxes are not ideal geometric objects.
Therefore, the boxes should be placed on a horizontal flat surface. Before cutting the plywood sheet, draw the outlines. And cover a sheet of plywood with varnish or stain.

Advice. You will need wheels for a coffee table from drawers. They can be purchased at any hardware store or hypermarket. It is best to buy casters that are small and low.

The wheels should be fixed at the corners and the drawers should be attached to the lower table top.
It remains to cover the coffee table with varnish. After applying the varnish, you need to let it dry and only then cover it with a new layer. This procedure is repeated several times.

Advantages and disadvantages of wooden tables

Wooden tables are a popular option that will easily fit into any interior. It is only important to choose the right shade that will be in harmony with the rest of the furniture. Like all objects, such designs have their positive and negative sides. The pluses include:

a large selection of wood (soft, hard wood);
a variety of shades and textures;
ease of manufacture and flexibility of the material;
naturalness and environmental friendliness;
versatility.

In addition to the positive aspects, it is necessary to note the disadvantages. There are few of them, or rather, only two: the high cost of the material and susceptibility to mechanical action (scratches, abrasions, etc.).

Popular ideas for making wood coffee tables

Specimens made of wood have always been distinguished by their environmental friendliness and beauty. And how many interesting ideas you can translate into reality! It would seem that a simple table made of wood, what can be original in it? We bring to your attention several popular options for making a coffee table.

Pallet table. For its manufacture, conventional pallets are required, to which the wheels are fixed. A distinctive feature of this design is its small height. It is enough to screw the wheels and the table is ready. Some go further and decorate it with a countertop and various shelves.
A table from an old door. If you have recently changed doors, then the old ones can be used as material for making a coffee table. The door needs to be sawn into three parts: a table top and two legs. They are attached to each other by means of corners.
Table made of wooden logs. Everything is very simple. You need to pick up or cut out the same pieces of wood. A plywood base is taken. Moving wheels are attached to its lower part, and logs of trees on top. Birch, aspen or beech are used as material.
Stump table. It is enough to attach the wheels to it, varnish it and the decorative table is ready.

A do-it-yourself coffee table is an original way to decorate a room. The design, dimensions and other characteristics of the item completely depend on the selected drawing and your preferences. It is worth noting that to make a table, you need a minimum amount of materials.

Do-it-yourself wood coffee table: video

Wooden coffee table: photo

How and from what to make a cool table with your own hands

Many people dream of decorating the interior of their apartment with exclusive and interesting designer pieces of furniture. A huge number of such interior items are presented in stores, but the prices for them are often simply fabulous. If you try a little, you can do some things yourself. For example, from various materials at hand, excellent coffee tables are obtained, which will become a real decoration of any interior and a source of pride for homeowners.

Side table in nautical style

In order to make your own coffee table in a nautical style, you will need an old window frame, which must first be cleaned of dust and dirt. Then, if necessary, insert new glass into the frame, clean the surface of the structure from paint and sand it with sandpaper. The surface of the frame should be coated with acrylic paint or white enamel.

To make the legs, you will need a shank, which must be cut into 4 equal parts. To remove all roughness and irregularities, sand the surfaces of the legs with sandpaper. As a base, you can use a furniture board or board, the width of which does not exceed the width of the window frame. The legs are attached to the base using long self-tapping screws. Also, the base with the legs is attached to the frame with self-tapping screws.

Since the frame is an empty transparent box, which can be filled with the attributes of a marine theme: pebbles, shells and souvenirs brought from rest. In order for the table to have a complete look, its legs can be braided with a thin rope.

Suitcase table

The original table will also turn out from an old suitcase. For such a piece of furniture, you will need to purchase furniture legs. They can be both metal and wood. If you use special casters, you can get an original model of a mobile coffee table. You will also need a screwdriver, screws and a piece of plywood for work.

First of all, it is necessary to cut a rectangle out of plywood, the dimensions of which must correspond to the width and length of the bottom of the suitcase. Plywood is placed on the bottom of the suitcase and the legs are marked. Using a screwdriver and screws, the legs are attached to the base of the suitcase. Then felt is glued to the base, inside the suitcase. The table is ready.
There are many different options for converting an old suitcase into a coffee table. With the right legs, the table can be made in a classic or retro style.

Log table

Making a table from logs is also not difficult at all. To do this, you need small logs of approximately the same thickness and height (32 pieces). You should also prepare the base for the table, 4 wheels for furniture or legs, putty, glue suitable for wood, and a screwdriver.

First you need to make a base for the table, along the perimeter of which there will be logs. The middle of the warp is sewn up with cardboard. Legs or castors are attached to the underside of the base. In order for the table to appear completely made of logs, small round dies must be glued to the surface of the cardboard. All voids formed between the dies are covered over and carefully rubbed over to create a smooth surface of the table. You can decorate such a table with branches.

Instead of a large number of small logs, you can use one thick cut of a log to make a coffee table in this way.

Pallet table

Even the most common pallets that can be found on each make an excellent coffee table. For work, you need to prepare:

Wooden pallets;
Hammer;
Drill;
Nail puller;
Clamps;
Glue;
Screws;
Screwdriver;
Legs or castors;
Primer;
Soap.

First of all, the surface of the pallets must be cleaned of dirt. To do this, you can use a drill with a wood attachment. Also, using a nail puller, you should get rid of old nails and disassemble the pallets into pieces. All damaged and broken pieces of boards must be glued together. Gently clamp the boards with the clamps and let them dry well. Then glue the prepared parts of the countertop on the reverse side and again with clamps. After complete drying, the surface of the table must be covered with a layer of primer and then varnish. It is necessary to attach wheels or legs to the back of the resulting table. In order to make it easier to fix the screws to the table, their surfaces can be rubbed with ordinary soap.

After all the work done, you will get a functional, stylish and compact table.

DIY cool table ideas photo

The living room will look empty if it does not have a coffee table made of chipboard or other suitable material. If you wish and have free time, you can make a coffee table with your own hands. This will help the recommendations below, as well as drawings of coffee tables. If you plan to fly a coffee table with your own hands, then you can easily find suitable drawings here.

Drawer table Metal table Transforming table

To make a coffee table with your own hands, you will need:

hardboard or plywood, if you are going to create a coffee table from plywood with your own hands or a transformer coffee table;
boards;
tape measure, which will help determine the size;
hammer;
grinding machine;
3-4 legs. If your plans include a round coffee table with your own hands, then you should take 3 legs;
a hacksaw for woodworking;
drill and drill set;
screws, screws, finishing nails;
putty and high-quality glue;
paint and primer;
sandpaper.

You may need additional tools, it all depends on what kind of coffee table you intend to make.

How to make a coffee table?

You can create a tea table with your own hands by following the scheme:

Cut the ends of the boards at an angle of 45º, cut out elements from wood material or chipboard, the length of which will be equal to the length of the workpieces made.
Center the parts, carefully align the ends.
Measure to determine the distance separating the outermost bars. Using the obtained parameters, cut out a pair of blanks that will be used as the lower supports. Secure them with self-tapping screws. Screw hardware into each longitudinal rail to give the table strength and stability.
Drill a couple of holes at the ends of the support beams that will be useful for joining the structure with other elements. If you do not have sufficient experience with the tool, practice using unnecessary wood scraps.
Place the workpieces on the sides, secure with a quick-clamping device called a clamp. Craftsmen who create a coffee table from chipboard or from softwood (solid pine) do this: they put board trimmings under the supports of the fasteners. Due to this, they avoid traces remaining on the surface.
Firmly fix the outer rails to the base, screw the screws into the pre-drilled holes.
Take measurements to find out the width of the base made (this is necessary in order to understand how long the blank should have for the end part). Experts say: “I collect things to the nearest millimeter, because I drank with a small margin in length, and carefully grind off the extra centimeters.” When making a wooden coffee table, take advantage of the advice.
Moisten the end pieces with water, apply adhesive, assemble the individual pieces. Cover with a belt. This will hold the structure together and fix it in a certain position. Use trim studs for a stronger bond.
Sandpaper the assembled coffee table with your own hands, removing any irregularities. The gaps formed at the seams must be filled with a putty compound.
Color the assembled do-it-yourself coffee table using a ready-made project.
Place mounting plates on the lower crossbars of future coffee tables, which will later be useful for making the lower part. Make holes and screw the legs into them.

A do-it-yourself transformer coffee table is a little more difficult to make, however, the coffee table assembly scheme is approximately identical.

A transforming table, made with your own hands from scrap materials, will complement the room and make it more functional. A living room transformer is optimal for a room.

1 2 3

As you can see, making a wooden coffee table with your own hands is not so difficult as it might seem at first glance.

Diy coffee table on wheels

1 2 3

If you wish, you can assemble a table from chipboard with your own hands on wheels. The folding coffee table is very easy to use, as it allows you to move furniture from place to place without any extra effort. An original coffee table with your own hands is a completely feasible task. Make a dining option according to the algorithm presented above, and then fix the wheels on the legs. You can remove this part from the old cart and equip a dining or stylish folding table with magazine boards or other utensils.

To fix fixtures at home, use quality screws. Attach the castors to the base of the structure, making sure that they do not protrude from underneath. It is unacceptable that the base makes it difficult to move the homemade table. Adjust the position that the coffee table will occupy: low or high level of the legs. It is important that the casters rotate without difficulty, allowing the table to be moved.

DIY glass coffee table

Tables with glass are very presentable and practical. The transparent table top matches perfectly with a variety of materials. To make a glass-topped coffee table out of wood, decide how thick the glass should be and choose the appropriate method for cutting it.

To make a glass coffee table with your own hands, you need a furniture board in which a hole of the desired shape is cut. Next, you need to fix the pre-cut glass in it (for this purpose, it is most convenient to use a glazing bead). If you have a glass cutter, it is better to use this particular device, which ensures high-quality work.

There are two main types of glass cutters: roller and diamond type. Devices of the first type are suitable for working on a thinner glass plate, the thickness of which is not more than 4 cm. The tool includes from 1 to 6 rollers. There must be a cutting line. Experts say that models with a reservoir for oil differ the best properties. They are great for both professionals and beginners alike.

Prepare the glass thoroughly before cutting, that is, rinse and degrease. If you are dealing with a relief surface, then a diamond glass cutter will not work at all for working on it. Cut the plate with the smooth side facing you. When cutting with a glass cutter, ensure that the line is completely covered with turpentine liquid.

After the glass has been cut, fix it using special glue. If there is no adhesive available, it is allowed to use suckers to make Provence-style furniture with your own hands, which are attached first to the leg, and then to the glass.

If you wish, you can decorate the table with your own hands with a variety of decorative elements, which will make it even more presentable and modern. Check out the photo or video on our website to understand how best to arrange a table on wheels. If you do not understand some of the details, ask the experts how to make a coffee table with your own hands.

The coffee table cannot be called essential furniture, but it does not take the last place in the arrangement of the living room or bedroom. Modern tables are endowed with a lot of functions, representing a storage system not only for the press, but also for other useful gizmos. Many models are equipped with spacious drawers and compartments, a transforming system that turns into a large dining table. Among other things, the coffee table acts as a significant element of the decor, which successfully complements the stylish design. It is quite possible to make such a thing with your own hands, if you apply a share of imagination and patience, and our article will provide interesting ideas for home design of a coffee table.

Materials for making

Many different materials are used in the manufacture of modern coffee tables. Unlike earlier times, when standard rectangular MDF structures were stamped, today's models surprise with their diversity. One of the most expensive options is wooden tables made of natural solid wood. Such a little thing will decorate any interior, it will always look chic and respectable. There are a wide variety of designs - from austere, rough tables in the Scandinavian style to classic ones, decorated with forging or carved decorations.

Since wood is quite expensive, chipboard and MDF boards help to replace it. If we talk about durability, they, of course, are inferior to wooden ones, but they look no worse. Design tricks, for example, transforming tabletops, built-in sockets, etc., allow to compensate for the simplicity of the material.

Metal also takes part in the design of coffee tables. Frames are formed from metal pipes, then complementing them with countertops from other materials. The graceful curls of forged elements with glass countertops look very beautiful. Sometimes you can find design developments in which the table is entirely made of metal.

In modern furniture production, more and more often you can find glass interior items that bring a certain lightness, airiness to the atmosphere. Products are made of heavy-duty tempered glass, resistant to all sorts of influences, so there is no need to be afraid that such a piece of furniture will break or deform under the influence of high temperatures. In some models, only the surface of the table top is decorated with glass.

Plastic is used much less often, since it is not highly durable, but it has a large color palette and low cost. Most often it is found as a component of a wooden or metal structure.

In the home production of original coffee tables, the choice of material increases significantly, since, in addition to traditional materials, various improvised means are used.

How to make a coffee table: beautiful ideas

For the manufacture of do-it-yourself coffee tables, plywood is most often used, which is relatively inexpensive and easy to process. You can also use various materials at hand and build the most bizarre structures. More complex parts, such as curly handles, legs, wheels, fittings and other decorative items, can be purchased at a furniture store.

Contemporary style plywood coffee table

Making such an original coffee table will not take much time, but the product will take its rightful place in any interior with a touch of minimalism. To work, you need to purchase a sheet of plywood, three legs with fasteners, a thick thread, a pencil, a centimeter, a jigsaw and paint (preferably white or black).

So, the first step is to cut out the countertop. On the back of the sheet, select a point that will be the center, drive in a small carnation. Cut off a piece of thread with a length of the radius of the future table. We attach one end of it to the hammered nail, and to the other we tie a pencil and, pulling the structure, draw a round shape of the table top. Then you can dream up and give the canvas a more original shape. It is noteworthy that drawings and measurements are not required at all for the manufacture of such a table. Cut out the drawn figure of the tabletop with a jigsaw, grind and paint. When the structure is completely dry, we fix the legs. The table is ready.

Pallet coffee table

This original design will perfectly "fit" into many styles. It will most successfully complement a daring loft or a natural eco-style. It is not difficult to design such an exclusive table: for work you need to get a pallet, metal legs or wheels (at your discretion). Also, you cannot do without self-tapping screws and a screwdriver, a saw, paint or varnish with a brush.

Step by step, all work on the design of the table will take place in the following order:

1. Mark the dimensions of the table on the pallet and saw off the excess part.
2. We take the planks from the remains and cover the gaps in the main structure with them to get a solid surface, fix them with self-tapping screws.
3. Turn over and form five transverse slats: two on the sides (legs will be attached to them) and one in the center for stability.
4. We mount the supports and open the structure with varnish or paint.

Tire coffee table

An old, worn out tire can be a good base for creating the perfect home coffee table. Additionally, you need to prepare plywood. Before starting the design, you must thoroughly wash and dry the tire. Next, you need to measure the diameter of the tire and cut two circles out of plywood: one - the table top - should correspond to the diameter of the tire, and the other - the base - should be a few centimeters smaller. You can immediately attach legs, wheels to the base, or leave it without supports at your discretion. We fasten round sheets of plywood to the bus using self-tapping screws or put them on construction glue - the base is ready.

Next, we choose one of two ways: we wrap with a rope either the entire structure completely, or only the sides. In the first option, you need to think about how to process the countertop - perhaps paint it or cover it with a shiny varnish.

You should start wrapping from the center: fix the end of the rope with a self-tapping screw or a glue gun and start moving with winding circles, gradually moving to the sides. There is no point in wrapping the base, unless you decide to make the table half two-color. At the end of the winding, the entire structure should be covered with a transparent varnish in order to extend the service life.

Drawer coffee table

If there are wooden boxes from under vegetables in your household, do not rush to throw them away. Only four such containers can turn into a beautiful and useful piece of the living room interior. If you do not have the boxes, the most difficult thing in making a table will be to get them. Then everything is simple: the boxes need to be sanded, painted and folded, as shown in the photo. We use a sheet of plywood, which must be screwed on the underside of the structure so that it does not fall apart. So our coffee table is ready. The advantage of this design will be the organization of capacious storage places for various magazines, books and other gizmos.

Travel coffee table

Nowadays, travel to different countries has become available to many. But there is a special category of people who simply cannot live without constant trips to distant corners. They will surely like the coffee table, reminiscent of certain pleasant voyages. Any old suitcase with hard walls that is not suitable for use for its intended purpose is suitable for manufacturing. You will also need a sheet of thick plywood, a screwdriver with screws, paints and, if desired, legs or wheels.

Cut out two sheets of plywood with an area equal to the base of the suitcase, attach them from the inside to the base and lid. We fasten the legs or wheels. Next, you need to decorate the table - different methods are used for this. One of the simplest options is to paint it white, and when the structure is dry, use sandpaper to make abrasions indicating the age of the item. Such a product will adequately decorate the living room in the shabby chic style. The black color of such a table will harmoniously fit into the loft living room, and the decoupage decoration will become a real masterpiece of Provencal design.

Driftwood coffee table

The uniqueness of the furniture made of stumps and snags lies in its uniqueness - what is created by nature itself does not have similar patterns and textures. Such products always attract the eye with their bends and weaves. In addition, it is not so difficult to get the source material - it can be found in the forest, on the shore of the reservoir. The driftwood must be washed, cleaned of bark, and rotten bends removed. Next, you need to correct, align the shape under the table top and base and let the workpiece dry thoroughly (if there are large holes in the wood, it can be putty).

The dried snag is carefully sanded, covered with a stain (you can choose the shade you like the most) and varnish. The base is ready. The tabletop can be attached using construction glue or self-tapping screws (depending on what it is made of). Nowadays, glass countertops are very popular, through which the winding wooden branches are clearly visible.

DIY coffee tables - photo ideas

We have considered only some of the options for making coffee tables with our own hands. Much more information and photos of finished products will be provided by our gallery, where you can get a lot of interesting ideas. Happy viewing!

The construction is very simple - table top and support legs or base. Of course, the item can be more complex and include additional countertops, drawers, shelves, etc., but for self-production, these devices are not so difficult.

But a hand-made thing is always completely unique.

This kind of furniture is made from a wide variety of materials: wood, glass, steel, aluminum, plastic, chipboard and plywood. And also from materials much more exotic: tree trunks, fittings, scrap metal, literally, leather, fabric, rods, and so on. Accordingly, different manufacturing tools will be required.

The main list looks like this:

jigsaw - the main working tool;
an electric drill and a set of corresponding drills;
hacksaw for wood or metal;
hammer - wooden or rubber, tape measure, level and pencil;
screwdrivers, a hex wrench, if you need to work with confirms, a file;
glass cutter if you intend to work with glass.

Materials are selected in accordance with the model, practical experience and financial capabilities.

Wood materials - furniture board, veneered MDF, laminated chipboard, plywood. Solid wood is one of the most expensive options, chipboard and plywood are much more affordable and much easier to process. In most industrial models, solid wood is used for strapping and legs, and countertops are made from MDF and chipboard.
The legs require a separate approach. They can be made from a wooden bar of the appropriate section. However, even the round shape of the leg will require the use of a milling machine. On the other hand, it is on the machine that products of a more complex configuration can be formed. If there is no such equipment in the household, the legs can be ordered from a woodworking workshop.
Glass - you can only use tempered glass, otherwise the reliability of the table will be in doubt. Glass thickness - 5–8 mm. It is perfectly acceptable to use acrylic glass if the coffee table is not supposed to be used as a seat: designers are now actively offering such models.
Metal - this option requires equipment, skills, and special knowledge.

The same can be said about the more than flexible and affordable material - the willow rod. Wicker tables are very popular in modern living rooms, but they certainly take some skill to make.

Fasteners and accessories - edge, screws, nails, rollers, suction cups are selected in accordance with the material of the product.

DIY car engine coffee table

How to make a coffee table with your own hands

No matter how simple this product may be, its implementation requires great accuracy and thoroughness. After all, a coffee table is a decoration of a living room, which means that it should be beautiful, graceful or unusual, depending on the style, but in any case - made with high quality.

If after the repair you still have chipboard boards, then make a coffee table out of them with your own hands, as shown in the following master class:

Made of wood

Wood is the easiest and most malleable material to work with. This means that the shape and design of products made from it literally have no restrictions. Wood and wood fiber boards of various kinds can be used to make a wonderful thing with a minimum of skills and tools.

The main thing here will be the exact observance of the proportions indicated in the drawing. The latter can be created by yourself or you can use a ready-made project.

Choose the shape of the table top - square, oval, curved. The latter is easier to make from chipboard or plywood. Saw the material with a jigsaw and a hacksaw.
The edge of a solid wood countertop or glued furniture board should be machined with a router to give it a beautiful shape, and then sanded with sandpaper. The edge of the chipboard countertop is processed with a grinder or drill with the desired attachment.
Legs can be made in different ways: glue several round or quarter-shaped planks, grind wooden blocks with a router, buy ready-made ones or use unusual material. It is considered very fashionable to install a tabletop on trimming curved branches or even hemp. The legs are fixed to the tabletop with corners, screws or glue, depending on the material.
When a coffee table is made of chipboard, especially in structures where shelves are assumed, not legs are made, but supporting sidewalls. Such a product is assembled on dowels, for which holes are drilled at the ends of the sidewalls. Fastening with tongue-and-groove piles is duplicated with glue.
The shelves are cut out of chipboard and fixed on dowels or self-tapping screws.
It is somewhat more difficult to assemble a drawer. Observance of angles and planes is very important for this part, therefore, elements and each connection must be checked with a level.
The finished product is treated with wood stain, painted, varnished or "aged" - at will.

With infinity effect

A tunnel-effect plane is obtained by combining two parallel mirrors and a light source placed between them. In this case, the upper mirror should be translucent, that is, with a light reflection level of 50% and a light transmission of 50%.

As a light source, a monochrome LED strip is used, the color of the radiation is chosen to taste. Mirror-coated glass or acrylic glass with a mirror film is used as a translucent mirror.

The table top in the form of a frame is assembled from an aluminum profile or chipboard. In the latter case, the frame element is made of two pieces of chipboard with different widths so that a protrusion is formed.
A mirror is inserted into the frame. Then the LED strip is fixed on the ledge or directly on the profile.
The table top is covered with a translucent mirror. The distance between the two mirrors is 75–80 mm, but may be larger. The fact is that the depth of the "tunnel" is determined by the distance between the mirrors and is calculated by multiplying the distance by 16.
The tabletop is checked by connecting it to a power source - through a transformer, of course. And then the product is fixed on the legs or sidewalls.

DIY coffee table with infinity effect

On wheels

Making a coffee table mobile is very simple. To do this, in the store, rollers are selected according to the weight of the product, and then they are fixed with self-tapping screws or screws to the legs, base, sidewalls - whatever. The rollers are hardly noticeable and practically do not affect the appearance of the product.

In non-classical styles - loft, Scandinavian, retro, on the contrary, large ones are selected, their presence is emphasized, since in this case they play the role of a decorative element.

Do you want to make a coffee table on wheels with your own hands? Then the following video will help you:

Glass

This option differs from the wooden one only in the peculiarities of working with glass.

On a sheet of tempered glass 5–8 mm thick, mark the shape and size of the future countertop.
Then a glass cutter, previously lubricated with sunflower oil, is carried out along the cutting line - a shallow notch is obtained. The glass is moved to the edge of the surface on which they are working, so that the excess fragment is suspended, and gently break off.
The operation is repeated until the countertop of the desired shape is obtained.
The edge of the product is filed to remove large chips, and then grinded with a grinder with a diamond tip. Then the edge is polished with fine-grained emery paper and a felt wheel.
The legs are fixed with suction cups. The latter are first fixed on the legs, and then attached to the glass surface. For reliability, you can drop glue on the glass section.

Dreaming of a unique piece with interesting effects? Then the following video will tell you how to make a DIY illuminated glass coffee table:

From scrap materials

No extra chipboard boards or glass scraps at hand? No problem! Do-it-yourself coffee tables can be made from scrap materials. And then we will tell you about the features of creating such a product.

Literally everything can serve as material for a coffee table in a non-classical style.

The easiest way to make the interior special is to make a coffee table, but, however, small, from hemp. You can use a whole stump, that is, only with the roots cut off at a certain height. If the product needs to be given mobility, then the cut should be of the same size in the upper and lower sections. The technology is simple: a fragment of a trunk or stump is leveled, flat surfaces are sanded and covered with a transparent polyurethane varnish. Holes are drilled in the lower part of the stump and 3 or 4 rollers are fixed.
It is not at all more difficult to make an option where a stump with "roots" serves as a support for a glass tabletop. The latter is cut out according to the scheme described above and simply glued to the top of the stump.

A little more patience will be required for a model where the table is formed by vertically standing slices of thin trunks or branches - it takes time to collect an armful of the required size. Fragments of the trunks are fixed on a chipboard base, glued together with a composition based on epoxy resin, level and polish the "table top". The product is opened with varnish.

For a Provence or retro style, a model made from a solid suitcase is suitable. In its lower part, holes are drilled and fixed on the legs with self-tapping screws. The suitcase can be decorated or painted.
In the loft style, a table made from a cable reel looks good. The latter is painted and installed on rollers so that it can rotate around its own axis, and the space between the base and the tabletop is divided by partitions into compartments or shelves. A multifunctional mobile table is formed.
A tribute to fashionable European traditions - a wooden pallet, treated with stain and installed on large rollers. From above, the product is covered with glass and an original display case is obtained.
The model of bicycle wheels is very interesting. It is a little more difficult to implement, as it requires some skill in working with metal. The arcs serve as the base of a complex shape, to which the tabletop is fixed with self-tapping screws. The latter is made of a wheel covered from above with a round glass screen. For safety, the edge of the tabletop wheel is sealed with a plastic edge, and hose cuttings are put on the ends of the legs.

Unusual DIY coffee tables for the living room

From a stump on wheels From a processed stump From a suitcase From a car rim
From tires From cable spool Crankshaft Wooden pallet

Product drawing with dimensions

On repair sites or communities, you can find blueprints for just about any design. In most cases, they offer not only sketches with dimensions, but also a detailed assembly diagram. The latter is very useful when the design of the model is really complex and includes different elements.

Most often, products from chipboard or plywood are offered for self-production, for the simple reason that these materials are easy to process, affordable and lightweight.
Drawings for glass tables are somewhat less common. Firstly, at home, it is possible to make only one option - with a glass tabletop, and, secondly, the structure of such a model is extremely simple.
Original coffee tables made from unusual materials, as a rule, are presented on forums without drawings and dimensions. But the assembly and the fastening feature are described in detail, since from the point of view of a home craftsman, these points are most important.

The following photos and dimensional drawings will tell you how to do it yourself.

Drawings of coffee tables

Curbstone-table Square On wheels
With drawer With glass top Transformer

How to restore a coffee table with your own hands

Really old products of the late 19th - early 20th century are subjected to this procedure. Mass-produced furniture usually does not represent aesthetic value, and here the repair is reduced not so much to the restoration of the coffee table with your own hands, but to the decoration.

This work is painstaking, takes time and patience. You will need hand tools - a nail puller, screwdrivers, pliers, chisels, and so on and an electric drill. From materials - sandpaper of varying degrees of grain, metal brush, varnish, stain, if the color of the furniture needs to be changed.

The table can be disassembled whenever possible. First, it is necessary to carefully examine all the details, since some of them are probably deformed or cracked from old age. If any element has become unusable, you can always order it from the workshop. Secondly, it is much more convenient to process surfaces and remove varnish from parts, and not from the whole product.
When dismantling, the screws and dowels are best drilled out.
Remove paint and varnish from the surface. If the layer is thin, it can be removed with a wire brush and regular sandpaper. If the coating is thick or the areas are damaged, using an electric drill with a brush attachment will give the best effect. You can also use a sander.

If the table is made of valuable wood or there are carved parts, then it is recommended to remove the varnish using a special paste, which is used by professional restorers. If you cannot find a remedy, you will have to clean the threads and bent wood with cloth-based sandpaper.

The cleaned surface is degreased with acetone or alcohol based products.
If it was not possible to remove scratches and chips by grinding, then the defects are putty, and after the putty dries, they are carefully sanded.
Deep cracks and faults are liquidated as follows: the crack is glued, the part is pulled together and fixed in a clamp until it dries completely - 12-15 hours. You can use self-tapping screws for tightening, after the glue dries, they are removed.
All joints are cleaned and glued as needed.
The table is treated with stain: old wood usually darkens and loses its brightness, stain returns expressiveness to the material. Then the product is opened with 2-3 layers of varnish.
After all the parts have dried, the product is assembled.

Below we present a photo of how you can update a coffee table with your own hands.

DIY refurbished coffee tables

Varnishing and painting Mosaic Pasting with photographic paper with images Skin-covering Coffee stains

The wooden coffee table is a classic that will never disappear from living rooms. Whatever style is implemented in the interior, there is always a place for an elegant and beautiful piece of wood. Originality and beauty are not a property of an expensive material, but the result of imagination, a sense of proportion and taste. Not everyone can afford expensive beech or marble, but everyone can show creativity and make an unusual thing.

In contact with