Near-station equipment for sawmilling. Near-station and auxiliary equipment. Near-station and auxiliary equipment from "nevastankomash"

The organization of efficient production involves the correct creation of technological lines. In each workshop or workshop, not only the main woodworking equipment, but also near-machine equipment must be present. Thanks to the competent selection of additional devices, it will be possible to improve the quality of manufactured products, as well as reduce time and reduce effort for its production.

Near-station and auxiliary equipment is called equipment that allows you to automate the production line as much as possible. Purchasing ancillary equipment will significantly reduce human involvement in the creation of goods. In other words, it will be possible to reduce the likelihood of marriage due to inexperience or inattention of the operator, as well as eliminate the possibility of time delays. Near-station equipment can significantly improve labor safety in production.

A distinctive feature of auxiliary equipment is the ability to work in difficult conditions, for example, with increased dustiness, high / low temperatures. In most models, it is possible to adjust the feed rate of goods. To cover the main parts of this type of equipment, powder paint is usually used, which protects the product from corrosion and gives it an aesthetic appearance.

Near-station and auxiliary equipment from "NEVASTANKOMASH"

A large selection of auxiliary and near-machine equipment is presented at NEVASTANKOMASH LLC. We offer equipment only from the world's leading companies, so we can guarantee its high quality and long uninterrupted service life.

We offer the following types of near-machine equipment:

• Roller tables for moving non-bulk cargo (bars, lumber, pallets, boxes, etc.). These devices are usually used if the use of a belt conveyor is impractical on the production line.
• Automatic feeders for feeding parts with a rough surface. Such installations are designed for use in conjunction with planer-planing machines.

For many years we have been cooperating directly with manufacturers, so we offer the most affordable prices for near-machine equipment. Buy auxiliary machines from NEVASTANKOMASH to modernize your production and increase your output.

It is difficult to imagine modern wood processing without the use of near-machine mechanization for sawmilling. It is a necessary component of a modern woodworking enterprise. It optimizes the supply of raw materials, waste disposal and automates production as much as possible.

Near-station mechanization for sawmilling is a general concept that involves the use of such means as roller tables, loading rack, log hauler, log ejector, loading device. This and many other equipment is presented in the catalogs of the company "KAMI".

A roller table used to transport and manipulate lumber between equipment in sawmills is called a roller table. The roller tables work perfectly in automatic mode, they independently separate the sawn products and discard the lumber thanks to several additional options: a chain feed drive, winding, separating lamellas and a gluing knife.

After transportation, the lumber needs to be loaded and a loading rack is used for this. It allows you to carry out loading and unloading operations in unequipped warehouses and sites, and greatly facilitates the unloading of trucks and wagons.

Between the process of manufacturing and transporting the finished lumber, a loading device is used to pre-accumulate the blanks and feed them to the head machine for processing. Structurally, the loading device is a simple and reliable tool for working in any production environment.

Rollers, loading devices, log ejectors

To bring their production to the maximum of automation, longitudinal timber conveyors are equipped with a device to simplify the process of dropping logs. The log ejector is installed along the timber conveyor in front of each of the timber stores. The log ejector has some design features that allow for high drop accuracy, minimum spread of log ends, etc. The log ejector operates with a minimum ejection force, without large dynamic loads on the ejector.

For longitudinal transportation of logs, a log hauler is used. It consists of a chain with transverse traverses with spikes that capture and hold logs, two blocks (drums or sprockets), of which one is leading with teeth or ledges, and a drive station. The log hauler is used when unloading logs from the water and shipping them to a warehouse or sawmill. The log hauler can be mounted on an overpass of any height and serve to supply logs to the warehouse. On farms, it is used for unloading and transporting short logs ranging in size from 1-2 m.

Modern woodworking is hard to imagine without the use of near-machine mechanization for sawmilling. It is a necessary component of a modern woodworking enterprise. It optimizes the supply of raw materials, waste disposal and automates production as much as possible.

Near-station mechanization for sawmilling- a general concept that involves the use of such means as roller tables, a loading rack, a log hauler, a log ejector, a loading device. This and many other equipment is manufactured by PILOTEHNIKA.

Roller table, used to transport and manipulate lumber between equipment in sawmills, is called roller tableroller tables they work perfectly in automatic mode, they independently separate the sawn products and discard the lumber thanks to several additional options: chain feed drive, winding, separating lamellas and gluing knife.

After transportation, lumber needs to be loaded and is used for this loading rack. It allows you to carry out loading and unloading operations in unequipped warehouses and sites, and greatly facilitates the unloading of trucks and wagons.

Between the process of manufacturing and transporting the finished lumber, a loading device is used to pre-accumulate the blanks and feed them to the head machine for processing. Structurally, the loading device is a simple and reliable tool for working in any production environment.

Rollers, loading devices, log ejectors

To bring their production to the maximum of automation, longitudinal timber conveyors are equipped with a device to simplify the process. dropping logs. log ejector is installed along the timber conveyor in front of each of the timber stores. log ejector has some design features that allow for high drop accuracy, minimal spread of log ends, etc. log ejector operates with minimal shear force, without large dynamic loads on the ejector.

For longitudinal transportation of logs is used log haul. It consists of a chain with transverse traverses with spikes that capture and hold logs, two blocks (drums or sprockets), of which one is leading with teeth or ledges, and a drive station. log haul used when unloading logs from the water and shipping them to a warehouse or sawmill. log haul can be mounted on an overpass of any height and serve to supply logs to the warehouse. On farms, it is used for unloading and transporting short logs ranging in size from 1-2 m.

Designed for longitudinal movement of raw materials from the lower warehouse to the sawmill equipment of the first row. They are used for piece-by-piece supply of logs to the areas of preparation of raw materials for sawing and to the sawmill at sawmills and woodworking industries.

Designed for piece-by-piece delivery of round timber to log saws of various types. Are issued with the hydraulic and electromechanical drive of the mechanism of piece delivery. Available in various lengths on request. Are applied as the loading equipment in sawmill shops of woodworking productions.

Are intended for unloading of longitudinal timber transporters (brevnotasok). Unloading is carried out perpendicular to the direction of transportation on one side. The dumpers have their own frame and are built into the log haul line instead of the intermediate log haul stand. The mechanism drive is hydraulic or mechanical.

1

It is intended for buffer accumulation of raw materials in the lines of the lower warehouses and its supply to the sawmill equipment of the first row through loading uncoupling devices. They are also used in the case when 2 or more machines of the first row with different technological performance are included in the production line.

0

Designed for longitudinal movement of raw materials from the lower warehouse to the sawmill equipment of the first row. It is used for piece-by-piece supply of logs to the areas of preparation of raw materials for sawing and to the sawmill at sawmills and woodworking industries. A feature of the log hauler is the possibility of separately ordering the components of the log hauler: a drive/tension station, a log haul chute and a traction chain with transverse traverses.