Overall dimensions of cable drums (weight, volume, height, width). Wooden drums Drum with cable 16 dimensions weight

. Drum design in accordance with GOST 5151-79, data on dimensions are given in the table below. The number of the drum corresponds to the diameter of the cheek in decimeters.
To protect the outer coils of a cable or wire, wound on a drum, from mechanical damage during transportation and storage, drum sheathing or packaging with mats is used.
Main traditional way sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that fits the sheathing along the edges.
The dimensions of the sheathing boards and steel tape are shown in the table. In permitted cases, partial sheathing can be performed, in which the gaps between the boards are not more than 50% of their width.

Overall dimensions of cable drums.

Drum numbers	Height, mm	Width, mm	Square, m?	Volume, m?	Drum weight, with sheathing, kg	Drum weight, kg






































17v with timber
18i with timber
20v with timber

wooden drums designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The number of the drum corresponds to the diameter of the cheek in decimeters.

To protect the outer turns of a cable or wire wound on a drum from mechanical damage during transportation and storage, drum sheathing or packaging with mats is used.

The main traditional way of sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that tightens the sheathing along the edges.

The dimensions of the sheathing boards and steel tape are shown in the table.

In permitted cases, partial sheathing can be performed, in which the gaps between the boards are not more than 50% of their width.

Design parameters of wooden drums

Drum number	Dimensions, mm							Number of pins, pcs.
	Diameter				Neck length, l	Thickness
	cheeks, D	necks, dsh	axial hole	studs	Neck length, l	cheeks, s	details

Dimensions of sheathing boards and steel tape, mm

Mat dimensions, mm

Mat number	Drum number	Board thickness (not less than)	Board width (no more)	Nominal mat width	Wire diameter (not less than)	Steel belt width


	14a; 86; ten; 12

	Yua; 12a; 14;14v




	20a;22a;226;22c

Lengths of cables or wires that can be wound on drums, m

Cable diameter, mm	Drum number
Cable diameter, mm	5	6	8	10	12	14	16	17	18	20	22	25	26	30

Packing mats are a continuous row of boards of the same length, fastened with steel tape or wire, which are wrapped around a cable or wire wound on a drum during packing. Mats are made with gaps between the boards. The sum of gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As reference material The table shows the lengths of the cable or wire that can be wound on drums of individual sizes.

If you have not found information on the products you are interested in, please contact the forum and you will certainly receive an answer to your question. Or use the form to contact the portal administration.

For reference: The "Reference" section on the site is intended for informational purposes only. The directory was compiled by sampling data from open sources, as well as thanks to information from cable manufacturers. The section is constantly updated with new data, and is also being improved for ease of use.

List of used literature:

Electrical cables, wires and cords.
Directory. 5th edition, revised and enlarged. Authors: N.I. Belorussov, A.E. Saakyan, A.I. Yakovleva. Edited by N.I. Belorussov.
(M.: Energoatomizdat, 1987, 1988)

“Optical cables. Manufacturers. General information. Structures, equipment, technical documentation, certificates»
Authors: Yury Timofeevich Larin, Anatoly Alexandrovich Ilyin, Victoria Alexandrovna Nesterko
Year of publication 2007. Publishing house LLC "Prestige".

Directory "Cables, wires and cords".
Publishing house VNIIKP in seven volumes 2002.

Cables, wires and materials for the cable industry: A technical guide.
Comp. and editing: Kuzenev V.Yu., Krekhova O.V.
M.: Publishing house "Oil and gas", 1999

Cable products. Directory

Installation and repair cable lines. Electrician's Handbook
Edited by A.D. Smirnova, B.A. Sokolova, A.N. Trifonova
2nd edition, revised and enlarged, Moscow, Energoatomizdat, 1990

Cables must be supplied on wooden drums (GOST 5151-79) with a diameter of at least 40 nominal outer diameters of the cable. The lower end of the cable with a length of at least 2.0 m must be brought out to the cheek of the drum, which must be protected from external mechanical influences. Cable ends must be hermetically sealed. The cable drum must have a solid sheathing.

Weight and overall dimensions of standard drums:

drum type	8	8a	8b	10	10a	12	12a	14	14a	14b	14g	16	16a	17	18	18a	20	20a	20b
L, mm	230	400	500	500	600	500	710	710	500	600	1000	600	900	750	900	900	1000	1060	1000
d, mm	450	450	450	545	545	650	650	750	900	1000	1000	800	800	900	1120	900	1220	1000	1500
D, mm	800	800	800	1000	1000	1220	1220	1400	1400	1400	1400	1600	1600	1700	1800	1800	2000	2000	2000
Weight*, kg	34	36,5	36,5	39	55	99	107	165	152	186	202	241	237	277	422	422	584	555	720

* the mass of the drums is given without skin and may vary depending on the relative humidity of the air and storage conditions.

Capacity of standard shipping containers.

Container	drum type
Container	8a	10	12	14	16a	17a	18a
3 t	4	3	2	2	1	1	1
5 t	7	4	3	3	2	2	2
20-24 t	24	15	8	7	6	6	6

External dimensions and weight of standard shipping containers

cargo containers

Sea and rail freight containers have enough solid construction and provide multiple transportation without intermediate unloading by several modes of transport.

our company manufactures and sells wooden cable drums 16. By purchasing cable drums No. 16 from us, you get:

High-quality goods from the manufacturer and therefore low prices;
the possibility of buying from 1 reel;
the ability to make a drum according to your size;
flexible pricing system and maximum discounts for your order volume;
free shipping;

Cable drum dimensions 16

A - cheek diameter;
B - drum width;
C - neck diameter;
D - neck length;
E is the diameter of the axial hole.
F - stud diameter
G - cheek thickness

Dimension table for cable drums 16

In accordance with GOST 5151-79, all wooden cable drums are used for cables with voltage up to 10 kV. Drums are made of softwood lumber or soft larch trees: alder, poplar, willow, linden, aspen (with the exception of birch).

Design parameters of protective materials for cable drum 16

To protect the cable coils on the drum during transportation and storage, the drum is sheathed from boards fastened with steel tape or laid with mats.

It is permissible to cover drum No. 16 through a board with a thickness of at least 25 mm and a width of not more than 250 mm, while the sum of the gaps between the boards should not exceed 50%. For reliability, the sheathing is fastened with a steel tape 0.3-0.5 mm thick and at least 25-35 mm wide. According to GOST, mats are made from boards or obapol. Today, manufacturers use mats as mats modern materials, films, polyester materials, etc., reducing the risk of damage to the cable sheath and cores.

Norms of winding cable on a drum 16

Maximum length the cable that can be wound on the drum depends on the diameter of the cable itself. The calculated data are shown in the table below.

Price per cable drum 16

OOO Cable systems offers its clients favorable price depending on order quantity. Our production can provide customers with the required products in full and in a short time. Sale of cable drums No. 16 is carried out from 1 unit.

Payment Methods

Payment for goods is carried out by bank transfer.

Cashless payments delivery will be made within 1-2 days after receipt Money to our checking account.

Delivery

Our company has its own fleet of vehicles. Delivery is carried out on working days from 9-00 to 20-00.

If you want to pick up your cable yourself, then you will need to contact our managers to agree on the time of shipment.

When ordering more than 150,000 rubles. delivery in Moscow and the region (30 km from the Moscow Ring Road) is free of charge!

Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of the drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The number of the drum corresponds to the diameter of the cheek in decimeters.