Drum 16 dimensions. Dimensions of cable reels. Design parameters of wooden drums

Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The drum number corresponds to the diameter of the cheek in decimeters.

To protect the outer turns of a cable or wire wound on a drum from mechanical damage during transportation and storage, drum casing or packing with mats is used.

The main the traditional way sheathing is the imposition of a continuous row of boards on the edges of the cheeks and fastening them with nails through a steel tape that wraps around the edges of the sheathing.

The dimensions of the sheathing boards and the steel strip are shown in the table.

In permitted cases, partial sheathing can be performed, in which the gaps between the boards are no more than 50% of their width.

Design parameters of wooden drums

Dimensions of sheathing boards and steel tape, mm

Dimensions of mats, mm

Lengths of cables or wires that can be wound on drums, m

Packing mats are a continuous row of boards of the same length held together by steel tape or wire, which are wrapped around a reel-wound cable or wire during packing. The mats are made with gaps between the boards. The sum of the gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As reference material the table shows the lengths of the cable or wire that can be wound on drums of certain standard sizes.

If you have not found information on the products you are interested in, please contact the forum and you will certainly receive an answer to your question. Or use the form to contact the administration of the portal.

For reference: Section "Reference" on the site site is intended solely for informational purposes. The handbook was compiled by sampling data from open sources, as well as thanks to information received from cable manufacturers. The section is constantly being filled with new data, and also improved for ease of use.

List of used literature:

Electrical cables, wires and cords.
Directory. 5th edition, revised and enlarged. Authors: N.I.Belorussov, A.E.Sahakyan, A.I. Yakovleva. Edited by N.I.Belorussov.
(Moscow: Energoatomizdat, 1987, 1988)

“Optical cables. Manufacturing plants. General information... Structures, equipment, technical documentation, certificates "
Authors: Larin Yuri Timofeevich, Ilyin Anatoly Alexandrovich, Nesterko Victoria Alexandrovna
Year of publication 2007. Publishing house LLC "Prestige".

Directory "Cables, wires and cords".
VNIIKP publishing house in seven volumes 2002.

Cables, wires and materials for the cable industry: Technical reference.
Compiled by and editing: Kuzenev V.Yu., Krekhova O.V.
Moscow: Oil and Gas Publishing House, 1999

Cable products. Directory

Installation and repair cable lines... Electrician's Handbook
Edited by A.D. Smirnova, B.A. Sokolova, A.N. Trifonova
2nd edition, revised and enlarged, Moscow, Energoatomizdat, 1990

The cables must be supplied on wooden drums (GOST 5151-79) with a diameter of at least 40 nominal outer diameters of the cable. The lower end of the cable with a length of at least 2.0 m must be brought out to the cheek of the drum, which must be protected from external mechanical influences. The cable ends must be sealed. The drum with the cable must have a continuous sheathing.

Mass and dimensions and standard reels:

* The weights of drums are shown without casing and may vary depending on the relative humidity and storage conditions.

The capacity of standard shipping containers.

External dimensions and weight of standard shipping containers

Freight containers

Sea and rail freight containers have enough solid construction and provide multiple transportation without intermediate unloading by several modes of transport.

our company manufactures and sells wooden cable drums 16. By purchasing cable drums No. 16 from us, you get:

• High quality product from the manufacturer and therefore low prices;
• the ability to purchase from 1 reel;
• the ability to make a drum according to your size;
• flexible pricing system and maximum discounts for your order volume;
• free shipping;

Dimensions (edit) cable drums 16

• A - cheek diameter;
• B is the drum width;
• C is the diameter of the neck;
• D is the length of the neck;
• E is the diameter of the axial hole.
• F - stud diameter
• G - cheek thickness

Cable Reel Size Chart 16

In accordance with GOST 5151-79, all wooden cable drums are used for cables with voltage up to 10 kV. Drums are made from softwood lumber or soft larch trees: alder, poplar, willow, linden, aspen (with the exception of birch).

Design parameters of protective materials for cable drum 16

To protect the cable loops on the drum during transportation and storage, the drum is covered with planks fastened with steel tape or laid with mats.

It is permissible to cover drum No. 16 through a board with a thickness of at least 25 mm and a width of no more than 250 mm, while the sum of the gaps between the boards should not exceed 50%. For reliability, the sheathing is fastened with steel tape 0.3-0.5 mm thick and at least 25-35 mm wide. According to GOST, mats are made from planks or obapol. Today manufacturers in the quality of mats use modern materials, films, polyester materials, etc., reducing the risk of damage to the cable sheath and cores.

Norms of winding a cable on a drum 16

Maximum length the cable that can be wound on the drum depends on the diameter of the cable itself. The calculated data are shown in the table below.

Cable drum price 16

OOO Cable systems offers its clients favorable price depending on the volume of the order. Our production can provide customers with the required products in full and in a short time. Sale of cable drums No. 16 is carried out from 1 unit.

Payment Methods

• Cashless payments delivery will be made within 1-2 days after receipt Money to our bank account.

Delivery

Our company has its own vehicle fleet. Delivery is carried out on weekdays from 9-00 to 20-00.

If you want to pick up your cable yourself, then you will need to contact our managers to agree on a shipment time.

When ordering more than 150,000 rubles. delivery in Moscow and the region (30 km from the Moscow Ring Road) is free of charge!

. Drum design in accordance with GOST 5151-79, the dimensions are given in the table below. The drum number corresponds to the diameter of the cheek in decimeters.
To protect the outer turns of a cable or wire, reeled on a drum, from mechanical damage during transportation and storage, drum lining or packing with mats is used.
The main traditional method of cladding is to lay a continuous row of planks on the edges of the cheeks and fasten them with nails through a steel tape that wraps around the edges of the cladding.
The dimensions of the sheathing boards and the steel strip are shown in the table. In permitted cases, partial sheathing can be performed, in which the gaps between the boards are no more than 50% of their width.

Overall dimensions of cable drums.

Wooden drums are designed for winding and transporting cables and wires. Currently, they are the main type of packaging for cable products. The design of drums in accordance with GOST 5151-79 is shown in the figure, and the dimensions are given in the table. The drum number corresponds to the diameter of the cheek in decimeters.

To protect the outer turns of a cable or wire wound on a drum from mechanical damage during transportation and storage, drum casing or packing with mats is used.

The main traditional method of cladding is to lay a continuous row of planks on the edges of the cheeks and fasten them with nails through a steel tape that wraps around the edges of the cladding.

The dimensions of the sheathing boards and the steel strip are shown in the table.

In permitted cases, partial sheathing can be performed, in which the gaps between the boards are no more than 50% of their width.

Dimensions and weight of drums (wooden with sheathing)

Design parameters of wooden drums

Dimensions of sheathing boards and steel tape, mm

Dimensions of mats, mm

Lengths of cables or wires that can be wound on drums, m

Packing mats are a continuous row of boards of the same length held together by steel tape or wire, which are wrapped around a reel-wound cable or wire during packing. The mats are made with gaps between the boards. The sum of the gaps should not exceed 50% of the total length of the M-200 mat and 30% for other types. As a reference, the table lists the lengths of the cable or wire that can be wound on reels of individual sizes.