Wall decoration by plastic panels. Technology of wall decoration by plastic panels. Wall decoration by plastic panels - beautiful decor with minimal costs How to make plastic panels on the walls

The wall decoration by plastic panels is now very popular. But before making a decision to choose this particular option, it is worth examining information about the properties of the material and the technology of its use. At first glance, you can find a lot of information about this version of the finish, but often it is distorted or provided in the form of uncomfortable perception. For this reason, the selection of the source of information is worth considering carefully.

Plastic as material

Wall finish with plastic panels has its advantages and disadvantages. They must be taken into account when making a final decision. The finishing material has the following advantages:

• Absolute harmlessness. Many plastic are frightened due to the fact that it is an unnatural material. Modern technologies allowing to produce harmless products, easier and cheaper than old. For this reason, it is extremely difficult to meet dangerous material even among fakes.
• Wall panels for interior decoration are very beautiful. There are many options for coloring and textures. In addition, manufacturers produce new seamless options that are very different from familiar office panels. You can choose a finish under a tree, monophonic, color. A photo printing is also applied to the coating.
• Ability to use in cramped conditions. Plastic panels for interior decoration are perfect for various niches and other parts of the apartment or at home, where it is inconvenient to work with other materials.
• Panels are easily mounted together with ventilation gratings, sockets. On any colors, these elements look natural and not striking.
• Plastic is perfect for trimming bathroom and other wet rooms. The decoration of walls and the ceiling is distinguished by durability, does not require complex care, can be operated at low temperatures (for example, on a laptile balcony).

The following negative points include disadvantages:

• Combustion. The material is difficult to set fire, but when exposed to fire, it supports burning and distinguishes a large number of gases dangerous for a person.
• Panels do not breathe. They completely overlap the movement of air through the walls, which is necessary to ensure normal ventilation. Because of this property, the type of finishing is not recommended for use in the bedroom and children's room.
• In the voids of the panels can settle insects. This problem is especially relevant for the southern regions.
• The need to use a special tool for cutting and certain skills when installing.
• Wall decoration with PVC panels with their own hands requires careful preparation of the foundation.

Having considered all the advantages and disadvantages of the material, it is safe to take a weighted decision on the possibility of using this type of finishing.

What instruments will be required

To work with PVC panels should be prepared. First of all, it will be necessary to find a special tool:

• Circular Saw. If there is no possibility to find it, you can apply the electrolovka. Pillet or disk should be with small cloths ("clean cut"). It is preferable to use a saw. The jigsaw feeder is highly flexible so the cut can be wavy.
• Stewing under the jack with corners of 45 and 90 degrees.
• Building stapler when trimming on a wooden crate.
• Rubber sick with rug-hook. The same tool is used for laminate installation. Need for "domestic" the jammed panels. Making it with hands, you can easily damage the panel or crate.
• The plaster spatula, which rebels the finishing profile when installing the last plank. The length of the spatula is 80-120 cm.

Also, when performing work, you will need:

• pencil and roulette;
• building level;
• corolnic;
• fasteners (self-tapping screws, dowel-nails, beammers);
• screwdriver;
• perforator;
• sealant;
• antiseptic.

Installation of plastic panels for wall decoration

Plastic can be perfectly replaced by wooden decorative elements and other finishing options. But it is necessary to attach it in strict accordance with the technology. Decorative wall panels will help make your home cozy and beautiful.

The decoration of walls in the bathroom and other rooms, as well as the ceiling by plastic panels performed in the following order:

1. preparation of the foundation;
2. markup;
3. cutting device;
4. installation of starting and finishing profiles;
5. installation All other slats;
6. facing of slopes;
7. fixing plinths.

Preparation of the foundation

Working with plastic starts with the removal of an old coating. In order for the finishing coating to have an attractive appearance without curvature and other troubles, it will take carefully to close all the slots in the walls and ceilings, eliminate the irregularities.

Marking

Before separating the room, it is necessary to determine the location of the racks of the frame. The decoration by plastic panels of ceilings and walls provides for the markup in this order:

1. Mark point at a distance of 1-2 cm from the floor level or walls. Through this point spend around the perimeter line. For accuracy markup use a construction level.
2. When marking the walls, the same line must be drawn under the ceiling.
3. From the bottom line with a step of 40-50 cm, parallel lines are carried out for the entire height.

This markup is suitable for mounting the panels vertically. Facing is always fixed perpendicular to the framework, so if necessary, lay the elements of the casing horizontally, perform vertical markup.

Cutting device

Most often, a tree is used as a crate under the panel for interior decoration of the walls. In this case, the rails must be treated in advance with antiseptic composition to protect against destruction. Along the markup lines using a perforator, the holes for fasteners are performed with a distance of 50 cm. The frame racks are fixed to the wall. If you need to lay the wiring under the finish, it is necessary to consider at this stage:

1. foreseen for wires;
2. check that they do not play the plane of the crate.

When used as a metallic c-profile crate, it is required to additionally buy elements for fasteners. They are usually sold complete. Metal is fixed to the base on the tapping screws in dowels. All work must be performed in accordance with the manufacturer's instructions.

To increase the thermal insulation or sound insulation of the walls, there are special mats between the frames of the frame. They are fixed depending on the type of material used. For different species, it can be used both attachments on a dowel and glue composition.

Fastening lamellae

The first plastic bar is required to fasten in the most illuminated and noticeable corner. Most often, one becomes one that is located opposite the entrance to the room. With the help of roulette make measurements. The panel is cut to the required length with a special tool (more often than disk saw).

One edge of the plank is inserted into a special side molding. This element is intended to ensure mutual fixing panels, which are located on different sides of the angle. An element with molding is applied to the corner and fix on the crate from the back side.

Next, you need to connect the first panel with the second. To do this, again use a puzzle system. The joint is tightly pressed and fix the bar to a wooden or metal frame. All subsequent elements are mounted along the same technology. To guarantee maximum tightness of the joints, it is recommended to lubricate the side edges before installing the panel with silicone. When installing the last part it is worth checking if it is suitable in width. If necessary, the element is cut into width. The last panel is not fixed to the crate. It must be snapped into the finishing element. If necessary, all joints are treated with silicone (sealant).

To complete the installation, you need to install accessories. These elements include plinths and their plugs, angular elements. The latter are bought along with the panels and shade over them.

To perform holes for switches and sockets, use a sharp knife. They cut holes required.

Installation of panels for glue

If necessary, the elements of the finish can be fixed directly on the wall without the use of the crate. In this case, an increased demand is presented to the ground. It will have to spend more time on its preparation, since the surface must be perfectly smooth.

Before starting work, they acquire special glue. It is allowed to apply liquid nails for installation. It is also important in the store to check the composition of the substance. It should not contain solvents that destroy plastic elements.

The work is performed in the following order:

1. cleaning the base from the old cladding;
2. treatment with antibacterial putty or primer layer, which contains components that can protect against mold and fungus;
3. drying base;
4. preparation of adhesive composition in strict accordance with the manufacturer's instructions on the package;
5. the choice of the working tool is carried out depending on the glue consistency: roller, brush, spatula;
6. work begin with angular elements;
7. glue at once applied to a small area (equal to about 1 panels) so as not to dry;
8. fix the angular part to which the ordinary element is mounted using grooves;
9. the panels pressed against the wall with their hands for a short time, for which the adhesive solution will have time to grab;
10. mount all other panels;
11. decorative elements are installed, the seams are riveted with silicone sealant.

In addition to installing glue and the crate there are some more methods that use professional workers. But they were not widespread. At the end of this, you can give several general tips:

• Panels are recommended for decoration of balconies, loggias, bathrooms, hallways and living rooms. For bedrooms and children, it is worth paying attention to more breathing materials.
• It is best to apply seamless plastic in rooms with air conditioning or forced ventilation system.
• In the bedroom for adults, it is permissible to use the material for individual sections of the walls.
• It is unacceptable to use elements in the kitchen. On the surface of the panels in this case, fat and other substances will fall on, which will become an excellent reproduction medium of bacteria.

Polyvinyl chloride panels (or just PVC panels) are practical, cheap and durable, due to which their popularity when finishing the walls of terraces, balconies, technical premises, as well as kitchens and bathrooms are quite explained. The material can be used in any rooms, and a huge variety of colors, textures and forms allows you to embody the most bold design fantasies, making the interior with stylish and cozy. It is also important that the lover of walls with PVC panels is quite simple and can even be even a person who does not have experience.

Pros and cons of PVC panels

Before choosing plastic panels, you need to understand for what purposes and in what premises they will be used. The operating conditions of PVC panels will depend on the operating conditions. So, for facing the terrace or balcony, you should not use materials with bright colors on the glossy texture, since the color under the influence of the Sun will quickly burn up, giving the material outdated appearance. For bathrooms it is preferable to use thicker and durable panels with a matte texture that is not afraid of drowshes and divorces. Thanks to the abundance of materials, you can pick up the color panels and functional characteristics to any room.

The advantages of PVC panels are:

1. Low price. Due to its availability, PVC panels are widely used in finishing. However, it is worth noting that the higher the quality and strength of the panels, the higher the price tag is rising on them. It is worth considering and always keep in stock alternative finish materials.
2. Moisture resistance. The parameter affecting durability when used outdoors, as well as affecting the protection of walls from moisture when used in the bathrooms.
3. From the previous point, the ease of cleaning of such surfaces is observed. PVC panels are fully washing even using household chemicals.
4. Harmfulness. Modern technologies do not intend to use harmful chemical compounds as part of PVC, which not only made the material safer, but also reduced it.
5. Appearance. The range of color solutions and textures is impressive, but even if this is not enough, you can apply any drawing on the panel using photo printing by making them original and unique. This is an advantage, for example, allows the use of PVC panels in the bathroom instead of tile.
6. Ease of use and speed mounting. The low weight and features of the structure allow you to apply plastic panels to cover the most sophisticated places, for example, the surfaces of the wrong shape, niches. The presence of grooves in the panels, as well as necessary for the installation of starting and finishing profiles, connecting slats and other elements ensures the speed of assembly of the entire structure.
7. Resistance. Of course, the material is easy to break or pierce, but accurate use and care will provide up to 20 years of PVC panels without loss of mechanical and decorative qualities.

If we talk about the minuses of plastic panels, then among them the following aspects can be distinguished:

1. Low strength. Low impact resistance is perhaps the only serious disadvantage limiting the prevalence of this finishing material. However, depending on the price of PVC panels, there are samples, the mechanical strength of which is not inferior, for example,. The strength is ensured not only the thickness of the walls of the coating, but also the number of ribs stiffened inside. This characteristic is checked simply - sufficiently slightly press the panel with your finger and if it happened, the service life is likely to be short-lived.
2. Tightness. PVC panels do not let the air, creating a hermetic space. This quality limits their use in residential premises.
3. In the voids behind the panels due to the presence of the crates can set insects. Also, when using panels in wet rooms, there is a risk of fungus when the moisture penetration into the gap.

Instructions on the trim of walls PVC panels

After selecting a suitable type of panels, you need to calculate the necessary amount of them, taking into account the stock. The width of the panels ranges from 200 to 350 mm, the length is from 2700 to 3000 mm, and the thickness is from 8 to 10 mm. Measuring the height of the room and the width of the walls, with the exception of door openings and windows, you can calculate the required number of panels.

Required tools

To cover the walls of PVC panels, you will need several tools that can be easily found or buy. The process is quite simple and only requires the presence of elementary knowledge. All the necessary tool can be fit into a small list:

• Construction level, Corollary for measurements.
• Perforator, dowel and self-tapping screws to secure the crate on the wall.
• Electrolovka or disk saw for segments of panels and cable sections.
• Building stapler, or small carnations and hammer for fixing panels.
• Pencil, roulette.

Preparation of walls under the crate

Although the requirements for the surface of the wall before cladding PVC panels are not presented, nevertheless, it is necessary to carry out some preliminary activities that contribute to the best consolidation of the crate.

Before assembling the crates from the wall surface, slices are removed by the slices of old shuffling plaster, tile, slices of exfoliating paint. The slots, cracks and other defects are cleaned and filled with the repair solution. It is advisable to process the surface with anti-grapple composition or primer to prevent the formation of fungus on the wall.

When installing the panels on the frame, the alignment of the walls is not required, since the smooth plane of the installed panels is provided by the aligned frame. However, if there are deep cracks on the wall and potholes, it will be easier to spend a rough wall alignment than to fit the framework.

Installation of crates

When installing the lathes on the wall there are several rules that need to be guided to achieve a smooth plane. The first rule is that when installing panels vertically, the installation of the crate is made strictly horizontally. On the contrary, when horizontal installation of panels, the lamp is installed vertically.

Secondly, it is important to keep the distance between the crates of the crates to better fix the panels on them. The most extreme rails (lower and top, or right and left) are mounted at a distance of 1-2 centimeters from the floor surface, ceiling or corners. All other rails between extremes should be placed evenly at a distance of no more than 40-50 centimeters from each other.

At this stage, the setting of rails in one level to ensure a vertical or horizontal plane. Checking the levels of risks can be performed using a long water level. The correction of the position of the regions is produced by lining wooden elements under the rail.

When using wooden plates, they must be covered with a special antiseptic composition to protect against rotting.

Installation of PVC panels

After all the preparatory work, they are moving to the direct installation of plastic panels. The panels are convenient for bonding among themselves, since on the one hand, they have a long fastening shelf, which is carried out fasteners to the crate, and on the other - the small shelf required for clutch with the next panel. Consider the steps to build panels:

• The starting and finishing profiles are made, as well as the inner corner, if the installation of the panels starts from the angle. With vertical mounting panels, starting profiles are attached to the upper and lower labels of the crate. Such profiles hide uneven edges of the panels and contribute to their better consolidation. The internal angle also avoids the slot between the panels and creates a competently designed adjoining unit.

  

• Installing panels starts with far from the corner. Typically, this place to the room is in relevant, so it is trying to use solid panels without trimming. The panel is cut down in length, start in starting profiles and levels in terms of level. When installing, it is allowed to slightly bend the panel so that it easily entered into the grooves of the starting profiles. Bringing the panel must be made by about 5 mm in short than the height of the ceiling. PVC panel is installed so that the free side is with a long shelf in which the next element will start.
• Fastening the panels to the crate can be made in three ways:
  
• After fixing the first panel, the next panel will start to it and is attached similarly along the entire length. Under the sockets and switches in the material cut the holes of the required size with a sharp stationery knife.

  

• The last panel is cut into a row in the width, if necessary, and neatly mounted into the space between the adjacent panel and the finish corner.
• Installing moldings. If, during installation, special corner profiles are not used, after the end of the trim, it is necessary to make it so that the surface does not look even on the perimeter, the seams did not resemble. For this purpose, external and internal angles are hiding under special plastic corners - moldings, the design of which makes it possible to hide the joints of the panels, making adjoining more attractive. Corners are glued to panels directly on quick-drying glue composition, for example, cyiacrine.

  

A competent approach to the choice of quality material, neat and attentive work in compliance with all requirements and rules will ensure an impeccability result, even when lining with your own hands, and the careful attitude towards plastic panels guarantees them a long service life.

For clarity, we suggest watch a video, in which the entire process of the walls of the walls of the PVC panels is very well shown.

Video repair of the apartment, repair instructions. Finishing with plastic panels of walls and ceiling with your own hands with video lessons.

At the moment, this type of finish is one of the most economical. Also, plastic panels are used to align the walls or ceiling. Suitable for any premises, and the video will help to figure it out. Plastic does not need special care, surfaces, plastic, you just need to wipe off with a damp rag from time to time.

Before starting work, it is necessary to determine the color and number of material. Implement all the measurements of the room and, based on the fact that the panels are of size 0.5 m * 3 m, calculate the desired amount. The panels are of other sizes, so it is recommended to go to the store in which you will buy materials and clarify all sizes. The number of docking profiles (moldings) should also be calculated in advance. All necessary materials should be taken with a small margin.

Panels are attached to a wooden crate. Therefore, you need to pre-decide how the panels will be located vertically or horizontally. If vertically, the wooden bars are attached to the wall vertically in increments of 0.5 m. Then the horizontal bars are fixed on them (3 pcs.). If horizontally, then the lower bars horizontally with a step of 0.4 m. We make measurements of the clamping elements and calculate the desired amount. Reiki is better to buy a length of no less height (or length) of the wall. Suitable section of bars - 4 cm * 2 cm or 6 cm * 4 cm. Wooden frame is mounted on the wall with the help of dowels and screws or with nails. Each item must necessarily check the building level, especially if the walls are very curves. The decoration by plastic panels is hidden with their own hands, but it is necessary to set the bars for this.

We set the starting molding, if the ceiling, in the upper and bottom of the wall does not apply. Then the corner, outdoor or internal, depending on where there is a cladding. After installing all profiles, start installing panels. Lightly bent, the panel is inserted into the starting profiles, and then until it stops in the corner. Be sure to check the installed level. Carnate panels can be used using metal holders. After installing the web, the holder is inserted into the edge of the panel and nailed to the wooden frame. Also for attachment you can use brackets or screws. Thus, all panels to the corner are installed. In the corner again install the corner profile, etc.

When cladding the kitchen, the installation should be done with a small gap between the panels, since the temperature in the kitchen is not stable. And with a significant increase in temperature, plastic will expand. And now we look at the video and fix the material.

Video finishing with plastic panels

Watch for updates on our website for your own hands.

The walls of the walls by plastic panels are often used in the creation of the interior of modern housing. The principles of interior decoration of the premises in recent years have undergone significant changes. Absolutely new ones came to change the morally obsolete materials.

One of them is plastic panels. Let's try to answer two main questions:

• what is this material;
• is it possible to carry out the walls of the walls by plastic panels on their own.

Plastic panels and their advantages

Plastic panels are one of the most modern and economical types of interior decoration. Thanks to the structure and installation method, even the most worn surface will subsequently have a completely new, colorful and concise appearance. PVC, or polyvinyl chloride, practically does not absorb moisture, so it is wonderful suitable for trimming baths and any other room in a house with high humidity or even outdoor construction.

Watch the bath with plastic panels will not be a lot of work, since the size of the average bathroom is small. Humidity does not affect the characteristics of the material, and the practicality in use will make the cleaning process with a fascinating occupation.

We note the main advantages when using PVC materials:

• rich color palette;
• low absorption of moisture;
• variety of shapes and sizes;
• convenience and simplicity of installation;
• practicality when cleaning.

Preparatory work

How to strip to stripped with plastic panels? Make it with your own hands more than possible, the installation process itself does not contain any secrets, besides, the simplicity of installation is laid in the design of the material itself. However, there are a number of subtleties that will be described below.

The first step is preparatory work. This is one of the poorer parts of any repairs. Whether it is a new construction or reconstruction of the old building, it is impossible to do without preparatory work. In our case, they are to remove the old wall cover (wallpaper, plaster) and minor surface equalization (elimination of large level drops, seelings of cracks). Why do it do if still under the trim will not be visible for the same finish? With quick installation, in conditions of lack of material means and time, they can not be performed, but if desired, it is necessary to obtain a qualitative result. Preparatory work is necessary.

The emptiness formed under the plastic panels, the ideal medium for reproduction of rodents and insects, and the cracks and the remaining finish are a wonderful help for penetration and their subsequent housing. In modern life, the issue of housing insulation is becoming increasingly relevant, and filling the buffer created by any type of insulation will be a great solution to both problems.Therefore, preparatory work is a very important stage before weching the walls with plastic panels.

In the second stage, we build a frame for mounting and a set of trim. The frame is the basis for fastening PVC panels, besides, it allows you to experiment with the form of the room. Round corners, a variety of shelves, curly elements are an incomplete list of what it becomes possible when it is erected. The most common materials for mounting the crates are a wooden bar and a metal profile. Both materials are remarkably suitable for building a frame, so the choice is due only to individual preferences. Next follows the process of direct installation. It lies in the construction of vertical and horizontal planks, which will be attached to the panels themselves. The magnitude of the step and the length of the spans depends on the width selected and the size of the panel itself and is strictly individual.

Surface covering walls PVC panels

The frame is ready, and can be separated by PVC panels. The principle is quite simple: starting from the angle, we recruit one after another plastic panel, by inserting the subsequent element in the first, and fix them with fasteners. It can be self-tapping screws, brackets, nails, i.e. Any favorite fastener. The PVC panel design provides a clear separation of "back-before", which practically leaves the chance of an error when typing panels. Decorative and curly elements are recruited and attached on a par with the rest. As a result, after installing all panels and fastening the decorative elements of the interior, we obtain the perfectly smooth, smooth and brilliant surface of the wall.

The process of plating with plastic panels is phased into video.

In conclusion on the topic

The result obtained is able to surprise and deliver the eyes of the average man, since it obtains a new and freshest from the old, used, beaten space. Walls covered with PVC panels look pretenuate.

In the modern market, the plastic panels feel more confident, they conquered people with their value and simplicity of installation.

In order to transform the selected room, you do not need significant costs, and to replace the boring wall surface and install the new, with a comprehensive approach, enough one to two days.

Related records:

Plastic panels are increasingly used as a finishing material for walls and ceilings. Their popularity constantly tends to increase, which is due to good performance, aesthetic appearance and simple installation work. Another significant advantage of the panels of this type can be called an affordable level of price indicators.

How to choose plastic panels

Plastic panels can be used without much concerns in rooms with high humidity.

Such material is distinguished by resistant to the effects of the aggressive environment and fluctuations in temperature indicators - suitable for. Moreover, their use prevents the formation of mold and fungus, which is relevant for. When choosing PVC panels, the length and widths should be taken into account. The material surface may have varnopy, glossy or matte performance.

Another significant advantage of PVC panels is the lack of need for careful alignment of the surface, as well as the ability to hide individual elements of communications under the frame.

Photo: Bathroom trim with plastic panels

When choosing this variation of the finishing material, attention should be paid to the fact that the plastic panels for walls and the ceiling have certain differences. The first possesses higher weights. In addition, they differ in a more rigid structure.

Bathroom Option Bathroom Plastic Panels

Plastic panels designed to finish the ceiling have a smaller weight. This is due to the need for mounting work at height. The minimum weight indicators will significantly facilitate this procedure.

Wall decoration and ceiling in the kitchen with plastic panels

Along with this, the ceiling plastic panels are more fragile. When performing installation work, you should be very careful, as you can easily damage the surface of the finishing material.

Wall decoration with decorative plastic panels

With a standard thickness of 5-10 mm, the width of the panels can vary from 25 to 50 cm. The length varies from 2.7 to 3 m. When choosing a finishing material, you should pay attention to the quality of the panel color, the uniformity of the drawing and the correctness of the forms. It should also be taken into account the quality of the performance of ribbonic. They should not hang around from the outside. The surface of the material should not contain characteristic chips and cracks.

From the quality of the density and flexibility of the PVC panel will depend on the level of stability of the material to deformation. If it is tightly squeeze such a panel, then it should not be traces of mechanical damage.

Required tools and materials

When performing work on the installation of plastic panels on the wall and the ceiling at the initial stage, you should choose the necessary tools and materials. To resolve the issue associated with installation, may be needed:

• pVC panels;
• drill;
• dowel;
• cord and pencil;
• perforator;
• ladder.

Moldings and corners should also be added here. Through the use of the latter, you can achieve the most evenly marking. Otherwise, when installing plastic panels on walls or ceiling, certain difficulties may occur.

Photo: Plastic panels under the bathroom tile

Plastic panels are selected depending on the features of the room planning. In the small room it is advisable to use narrow panels. Under the condition of finishing a more spacious premises, it is advisable to resort to the use of wider products.

Photo: ceiling decoration with built-in lamps of PVC panels

Instead of dowels, self-tapping screws can be used. They are needed if the framework will have a metal execution. Dowels are relevant only subject to the use of a wooden frame. It should also be noted that the foundation base cannot be installed in rooms with high humidity. This is due to the fact that such material is subject to rotting, as well as the negative influence of fungi and mold. For this reason, in the kitchen and in the bathroom, the use of a wooden frame is not an expedient solution.

Construction of wall crates and ceiling

The framework device is a priority question that should be resolved when installing plastic panels on the wall or ceiling. Above it was noted that a wooden or metal frame variation can be used as the basis. The optimal distance between the individual elements of such a base is equivalent to 50 cm. Thus, it is possible to compensate the surface of the surface of the ceiling or walls. The recommended sequence of action will look like this:

1. Marking.
2. Installation of profiles throughout the perimeter of the surface.
3. Installation of transverse profiles.
4. Installation of the base of fastening PVC panels.
5. Installing panels.

During marking for starters, it is necessary to determine the smallest height of the ceiling. From this point on the walls it is necessary to spend two lines. To do this, you can resort to the use of a cord painted with chalk. The correctness of the markup is checked using a construction level.

After the markup should establish profiles around the perimeter of the surface. The fixation of these elements should be carried out without the formation of voids and spaces. Otherwise, it will be very difficult to achieve maximum reliability of the entire design.

Frame from profile for walls

After installing transverse profiles, the task is to be allowed to install the base for the fixtures of the panels. For fastening plastic profiles, you can use the screws.

Frame from the profile on the ceiling

When installing metal frame variations, the frame should be as attentive as possible. The total weight of the design will be quite large, so it is necessary to ensure high reliability of its attachment. The mounting of the suspensions to the concrete overlap can be carried out by using special dowels with a hat on the sleeve. Ordinary dowels will fall, as concrete is distinguished by the presence of internal voids.

Fastening the first panel on the frame

Holes in the metal profile can be drilled simultaneously with the preparation of holes in the wall. Subject to the installation of the frame on the ceramic tile, it is advisable to resort to the use of the perforator only if the adhesive mixture is completely dried. With a different scenario on the surface of the tile, cracks may appear.

Panel mounting features

Or the wall is expedient to just start with the determination of the optimal length of the material. It is recommended to provide a solution to this issue in advance. To trim plastic panels, you can resort to the use of ordinary hacksaw.

There is nothing complicated in the installation procedure of such panels. They are pre-placed in profile, and then fastened with the help of self-tapping screws. It is recommended to start the installation of plastic panels from the corner of the room. This also applies to the ceiling, and walls. It is also very important to trace the quality and level of installation of the first element. It should be located strictly perpendicular to the wall or ceiling. Otherwise, the panel will not be able to snap into the groove and the need to dismantle and the new installation will arise.

Special label for plastic panels with fasteners

The edges of plastic panels must enter the planks. The last detail is adjusted under the optimal distance to the wall. If necessary, you can cut the panel with ordinary hacksaw.

Tip! Before performing work related to the installation of plastic panels on the ceiling or wall, it is recommended to pre-take care of the installation of various elements of communication systems. They are able to disguise the plumbing pipes, wiring or heating pipes.