How to switch the phone to tone mode. How to set the phone to tone mode - what is it How to set tone mode on a Panasonic phone

Each of us at least once heard "put the phone into tone dialing mode". And I was sure that for this you need to press the "*" key. However, this manipulation is not equally effective for all phones.

What needs to be done to switch the radiotelephone to tone mode

You can check the activation of the tone mode by pressing any button on the phone while off-hook. Your machine may already be in touchtone mode. Listen for the sounds it makes when dialing a number. If these are short signals, then the mode is really tone. If you hear short clicks in the telephone receiver, the dialing is impulse. This means that you may not be able to use some of the interactive features.

For some phones, you may not be able to simply press a key to switch to touchtone mode. It is necessary to fix it for 1-2 seconds. Try to hold the "*" or "#" key for a while. Then look at the screen of your radio phone. The corresponding inscription should appear on it: "tone" or "t". If the inscription does not appear, again listen to the sounds that the phone emits when you press the buttons. Some telephones have "tone" or "t" and "and" keys / switches. In such phones, simply select the desired mode (pulse / tone). Switches can be located on the side or bottom of the base / tube. There are many telephones with a customized way to switch to tone dialing. For example, successive pressing of the keys "*" "-" or "-" "*" "-". Tone mode is on.

If none of the combinations helped to switch your radio phone to tone dialing mode, study carefully the menu of your device. In many, switching from one mode to another occurs in the handset settings. Open the menu, select the appropriate item (tone / pulse mode), press "ok". If none of the methods suits you, carefully read the instructions for your phone. Perhaps he is individual. In addition, improper handling can lead to unwanted changes in some functions.

Many of us, at least occasionally, have to call multi-line telephones to a variety of hot lines. It is easier to do this from a mobile phone, but sometimes it is more expensive, because the operator starts to read money from the beginning of the connection. First, you listen to the message of the answering machine, which prompts you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line, waiting for the operator to answer. In this case, it is more profitable to use a stationary device, but in this case it is necessary to decide how to transfer the phone to

Phone operating modes

There are two types of phone operation - pulse and tone. A conversation is possible if you turn on the tone mode. and PBX support pulse dialing by default. Modern digital automatic telephone exchanges and more advanced telephone models are tone-based. You can determine how your phone is set by default by lifting the handset to your ear and listening to the sounds in it while dialing:

1. On the phone, which is set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
2. In tone mode, a characteristic sound signal will be heard in the speaker.

If you have heard the sounds described in the first case, to call the hotline you need to know how to switch the phone to tone mode. However, it should be noted that the owners will not be able to do this without purchasing additional equipment.

How to find instructions for a telephone

First of all, when we need to learn a new function of some thing, we turn to the instructions. It comes with any technique. In it you can find many very useful tips, including how to switch the phone to tone mode. If the user manual is lost along with the box, or it was not there initially, you should use the tips suggested later in our article.

The easiest way to set your phone to tone mode

Sometimes, for objective reasons, it is impossible to find a user manual, or it may contain only a technical description of the model, and the functions are very poorly disclosed. In this case, use a simple and proven method of switching to tone mode.

After you have dialed the number and you have been connected to the answering machine, press the "asterisk" (*) and hold it for a couple of seconds. Usually this is enough to immediately switch to the required mode. If the transition did not work out, then you should try again. If the transition procedure was successful, you can enter any extension numbers. However, each time you call, you will need to go through this procedure.

Tonal mode and its features

Previously, other companies thought about introducing a tone mode in their devices, Panasonic specialists. It is no secret that its widespread distribution is only a matter of time, an increasing number of automatic telephone exchanges use digital technologies, and organizations create multi-channel numbers for convenience. Before putting your Panasonic phone into tone mode, examine the unit carefully. On some models you may see a "tone" key or a "pulse-tone" switch. The switch must be set to "tone" mode, and the key is simply pressed.

Modern radiotelephones of this brand are programmed for tone dialing by default, and most often you do not need to enter additional settings. If the program is crashed, then with the help of the instructions it is easy to fix it.

How to switch to tone mode Panasonic KX-TCD225RU 9 (handset with base) and got the best answer

Answer from Navigator [guru]
... KX-TCD225RU. KX-TCD215 ... Thank you
for the purchase of a new Panasonic digital cordless telephone. Reference...
temporarily switch the dialing mode from pulse to tone. ..
link - -1k = 32 -th page of the instruction BASE setup 000 Call options Dialing mode Tone .... confirmation is required everywhere (RIGHT arrow)

Answer from Egor Gavrilenko[newbie]
Temporary dial tone or permanent?
Temporary tone dialing (for
pulse dialing service)
If you need to access
tone dialing services (for example, to
telephone banking service), you can
temporarily switch the dialing mode from
pulse to tone.
1 Make a call.
2 When asked to enter your code or PIN,
code, press (*), then press
corresponding dial keys.
Note:
L Pulse dialing mode
recovers
Just in case, the manual can be downloaded here:
you can still rummage here:

Answer from Ildar Babamuradov[guru]
If your PBX does not support tone mode, then how do not turn it on anyway, you will hear pulse dialing clicks in the receiver as if you were turning a dial

Answer from Maxim Bogdanov[newbie]
Group interception stopped working in one of the office phones, as it turned out the problem was that the phone was in pulse mode.
Panasonic KX-TS2365RUW phone - by default the phone is in pulse dialing mode. I am looking for a lever for switching to a tone mode on the side. There is no lever. Pressing the asterisk button (tone) switches to tone dialing only temporarily, and after hanging up the phone, the phone will again switch to pulse by default.
To switch this phone to tone dialing, you need:
1. Press the PROGRAM button.
2. Press the MUTE button.
3. Press button 3.
4. Press the "1" button to select "TONE". To select "PULSE" press button "2".
5. Press the PROGRAM button.
It should be taken into account that the phone must have batteries, otherwise the settings will not be saved and will fold again after you hang up.