Calculate the volume of a box in liters online. How to calculate the volume of a box? Why calculations are needed

Enter dimensions in millimeters:

X– The width of the container, the transverse distance between the walls.

Y– Tank length, i.e. its length, the largest linear dimension in the longitudinal direction.

L- The height of the container is determined by the height of its walls.

h- The height of the liquid level, it is determined by a measuring ruler (the so-called meter rod), if there is no such tool, an ordinary rod made of wire or wood of suitable length will do. Observing safety measures, lower the rod strictly vertically into the tank to the bottom, mark the level on it, remove it and measure it with a tape measure. Also define h can be measured by measuring the distance from the top of the tank to the surface of the liquid and subtracting this figure from the height of the tank L.

The online calculator will help you calculate the total volume of the tank and find out the maximum capacity of the tank (in m 3 and liters). Find out how much substance is already in the container. The value of the free volume will give an idea of ​​how much liquid can still be poured into the container. The program will also calculate the bottom area, side surface area and total area capacitance, which will help to easily calculate right amount materials for finishing the entire tank or its parts.

The number of boxes

Result:

The volume of one box (m 3):

Total volume (m 3):

Use received
result for
application form

Number of pipes

Result:

The volume of one pipe (m 3):

Total volume (m 3):

Use received
result for
application form

How to calculate the volume of a box?

Do you have a question about delivery?, and also there was a need to know how to calculate the volume of cargo, do you need our help? We know how to calculate the volume of cargo, on this page you see a calculator that will accurately perform the calculations.

In general, for what purpose is the volume calculated?

It is necessary to calculate the volume in order to avoid misunderstandings when loading loaded boxes into vehicle. Calculate the volume using modern technologies today it is not difficult, your being here is enough.

What criteria do we use to calculate the volume of cargo?

Firstly, everyone knows that every detail is important in the delivery process, and it is important to calculate the volume of cargo as a whole without errors. As already mentioned, our volume calculator will help you calculate the volume of cargo, it will do it quickly and reliably!

Second- volume calculator, start it on our website, already mentioned above, as you can see, we care about our customers. The volume calculator, that's what can make it as easy as possible to work with calculations, and completely kill your doubts.

What are we giving you?

What else is needed?

For example…

You are an entrepreneur who is engaged in transportation from China, and you constantly need a calculator for calculating the volume. You can quickly find the volume calculator on the pages of our website, and perform your calculations right now.

Nowadays, business is based on the Chinese production of goods, but where did the need to calculate the volume come from? It is necessary to calculate the volume in order to find out the total volume of cargo, and then select the type of transport.

What is the calculation of volumes in delivery? And what role does he play?

Volume calculation- this is how, you already understood very much milestone in delivery, and you need to trust him in reliable hands professionals. The calculation of the volume of cargo must be done carefully, taking into account all dimensions, and converting them into cubic meters.

But unfortunately, not everyone copes with these calculations.

Also in school times we studied how to calculate the volume of cargo in m3, but unfortunately, you won’t remember all this. How to calculate the volume of cargo in m3 - there are times when this question comes to the fore, for example, during delivery.

That's what this page is for!

After all, that's what this page is for. to help you calculate shipping.

To calculate the volume of the box, you do not have to try to do it yourself, you just need to fill out empty fields. The calculation of the volume of the box will be automatically performed by our calculator, if in doubt, check for yourself.

To do this, we reminded you of the volume formula.

Calculation of cargo volume in cubic meters you need in order to submit the correct application for its carriage. Calculating the volume of cargo in cubic meters, i.e. knowing the volume itself will help you decide which type of delivery is right for you.

And now let's move on to the main, let's talk about how to make calculations and why they are needed.

To begin with, let's take a look…

Calculating the volume of cargo is not always easy, as it seems, all this is due to the fact that boxes can be of various shapes. Calculating the volume of cargo of a rectangular box is a trifle, but the rest is hard, you need to know the formulas.

To begin with, let's define the form, for this we first find out what they exist.

What shape can the box have?

• Rectangle;
• cylinder;
• Truncated pyramid (very rare).

Then comes the measurements

Before calculating the volume of the box, we will measure it, but remember, the more accurate the measurements are made, the easier it is for you. "How to calculate the volume of a box?" - what to do next: determine what shape it is (cube or rectangle), dimensions.

What does knowledge of volume give us?

Knowing the volume of the box will not allow misunderstandings when loading goods into any type of transport that may be. Almost nothing depends on the volume of the box, rather, on the contrary, everything depends on the size of the product itself.

And why? Everything is obvious here, before you buy a box, you need to find out the size of the cargo that you are going to transport across the border.

Well, now you know the dimensions of the cargo, now it remains to calculate its volume (in order to purchase a box).

So, in order to find out how to calculate the volume of cargo in m3, the formula will be required first. How to calculate the volume of cargo in m3, the formula will help without a doubt in this matter, this is how it looks like V = a * b * h, everything is very simple.

Especially since you already know it.

We would like to remind you that…

To make it easier for you to determine which type of transport to choose for delivery, you need to calculate the volume of cargo in m3. Calculating the volume of cargo in m3 is very simple, here you need to know exact dimensions, which then need to be multiplied.

Units must be converted exactly to m3, otherwise it will not be possible to calculate the delivery.

But what if the shape of the box is not rectangular, but rounded? After all, this is a rarity, but it still happens.

You can calculate the volume of boxes or containers at the base of which lies a circle, and there is also a formula for this. The expression V * r2 * h allows you to calculate the volume of the box in the shape of a circle, the dimensions must first be accurately measured.

Volume calculator

We bring to your attention a calculator: the volume of goods in m3, with the help of which you can independently make calculations. The cargo volume calculator is located on the rental website especially for your convenience and for quick calculations.

Why do you need a cargo volume calculator?

We are business people and wasted time sometimes carries big disadvantages. Do you want to receive cargo quickly and reliably? And at the same time to the maximum short time find out the prices for their transportation and delivery?

This is where the cargo volume calculator will help!

Our volume calculator allows you to calculate the volume of cargo in m3, so the question of the volume of the box will no longer arise. The volume calculator is simple and easy to use, it will give the results of both the volume of the box and the load.

So, with the help of the volume calculator you solve several questions:

How to calculate the volume of cargo (or box)? Do not forget about the quantitative unit that you are taking into account.

Have you encountered one of them or have a similar one? Our company is pleased to offer for your convenience the volume in cubic meters of a box to calculate using a handy calculator.

And finally, let's remember the math!

What is the most common problem?

Many confuse then how to calculate the volume of flat figures and volumetric ones, because they are mistaken in concepts, or rather, they find it difficult to answer. You don’t need to know how to calculate the volume, it’s enough that you indicate the dimensions, the main thing is not to forget that there are 3 of them.

Having finished all the calculations, there is one more task left.

What kind of transport do you need?

Recall that in delivery, in addition to how to calculate the cubic capacity, there are no less important things, for example, the placement of goods. You know how to calculate the cubic capacity, so everything else is in your hands, now the choice of transport is up to you.

Enter dimensions in millimeters:

D- the diameter of the container can be measured with a tape measure. It must be remembered that the diameter is a segment greatest length connecting two points on a circle and passing through its center.

H- the liquid level is measured using a measuring rod, but if such a tool is not at hand, use an ordinary wire rod or wooden plank suitable length. Observing safety measures, lower the rod strictly vertically into the tank to the bottom, mark the level on it, remove it and measure it with a tape measure. Also define H can be measured by measuring the distance from the top of the tank to the surface of the liquid and subtracting this figure from the diameter value.

L- the length of the container.

If you need a drawing in paper form, it is advisable to check the box "Black and white drawing". You'll get a high-contrast image that you can print without wasting color ink or toner.

Capacity- this parameter characterizes the total volume of the tank, i.e. which maximum amount liquids in cubic meters or liters can fit in it.

Amount of liquid- how much substance is in the tank at the moment.

Free volume allows you to estimate how much liquid can still be poured into the container.

As a result, you get a calculation of not only the volume of the tank, but also the volume of liquid in an incomplete tank.

Metal products should be periodically painted, then their service life will increase significantly. Knowing front surface area, side surface area And total tank area easy to estimate the required amount paintwork materials for processing the entire container or its individual parts.

To calculate the volume of a body or substance in liters, you need to know its volume, expressed in other units of measurement. If the volume of the body is previously unfamiliar, then it can be calculated through mass and density. There are special methods and tools for measuring mass and density.

You will need

• calculator, scales, substance density tables

Instruction

1. If the volume is given in cubic decimeters (dm?), then the volume in liters expressed in the same number. Therefore, it is easy to change the unit of measure dm? per liter (l). Vl \u003d Vdm? To convert the volume given in cubic meters (m?), Multiply the specified numerical value by 1000. ) or milli liters(ml), divide the given numerical value by 1000. Vl \u003d Vcm? / 1000 \u003d Vml / 1000. In order to calculate the volume in liters, if it is given in deca liters(dl) or buckets, multiply the number of decaliters by 10: Vl \u003d Vdl * 10

2. If the volume is given in non-metric units (national or household), use the following instruction: liters, multiply it by 3.7854. Do the same with other units of volume: overseas quart - multiply by 0.9464; overseas gallon - 3.7854; overseas dry barrel - 115.6270; overseas bushel - 35.2391; overseas liquid barrel - 119.2400; oil barrel - 158 .9873; imperial gallon - 4.5461; imperial quart - 1.1365; imperial pint - 0.5683; imperial ounce - 0.0284; overseas pint - 0.4732; overseas ounce - 0.0296; imperial bushel - 36, 3687; teaspoon - 0.005; tablespoon - 0.0148; mug - 1.23 (conditionally); glass - 0.2; cubic inch - 0.0164; cubic foot - 28.3168.

3. If the volume of a body or liquid is unfamiliar, then calculate it using the following formula: V \u003d m * p, where: V is the desired volume, m is the mass of the body, liquid or substance, p is its density. If the body mass is unfamiliar, then determine it weighing. Find the density of the substance in the density tables. The resulting volume value will be in liters if the mass is given in grams (g) and the density is given in grams per liter (g/l). In other cases, convert the volume to liters using the instructions above.

When working with small volumes, the milliliter (ml) volume unit is often used. A milliliter is a thousandth of a liter. That is, one liter contains one thousand milliliters. In order to convert liters to milliliters, you don’t even need a calculator - quite simple knowledge in mathematics.

You will need

• - pencil,
• - paper.

Instruction

1. In order to convert liters to milliliters, primitively multiply the number of liters by 1000. That is, apply the following primitive formula: Kml \u003d Cl x 1000, where Kml is the number of milliliters, Cl is the number of liters. So, say, one teaspoon contains approximately 0.005 liters of liquid. Consequently, the volume of a teaspoon, expressed in milliliters, will be: 0.005 x 1000 \u003d 5 (ml).

2. If the number of liters is an integer, then to convert liters to milliliters, primitively add three zeros to the number of liters on the right. Let's say that approximately 10 liters of water fit in one bucket. This means that the volume of this water in milliliters will be: 10 x 1000 \u003d 10,000 (ml).

3. If the number of liters is given as decimal fraction, then move the decimal point three places to the right. Let's say a kilogram of gasoline occupies a volume of approximately 1.316 liters. Consequently, in milliliters, a kilogram of gasoline will have a volume of 1316 (ml).

4. If there are less than 3 digits later than the decimal point, then complete the missing digits with zeros. So, let's say, 0.2 liters of liquid fit in one glass. In milliliters, it will be - 200 (ml) (officially it turns out 0200 ml, but the insignificant zero on the left can be discarded).

5. If all the initial data of the task are given in liters, and the result is required to be presented in milliliters, then carry out all intermediate calculations in liters, and convert to milliliters only after the end of all calculations. Let's say if 1.325 liters of black paint were mixed to prepare the paint of the required shade, 0.237 liters of red, 0.587 liters of green and 0.54 liters of blue, then to calculate the total number of paint in milliliters, add the indicated numbers in liters, and multiply the total by 1000.1.325 + 0.237 + 0.587 + 0.54 = 2.6892.689 x 1000 = 2689 (ml).

Note!
Converting liters to milliliters is often used in calculations related to the preparation of medicines and other energetic solutions. With such calculations, be very careful - if everyone makes a mistake by one decimal place, the result will change ten times.

Helpful advice
Note that the density of water is 1000 g/l or 1 kg/l or 0.001 t/l. Consequently, in order to calculate the known mass of water in liters, it is easy: divide the mass in grams by 1000; multiply the mass in tons by 1000; take the mass of water in kilograms equal to the volume in liters.

Sometimes it is very important to accurately calculate the volume of water passing through the pipe. For example, when you need to design new system heating. Hence the question arises: how to calculate the volume of the pipe? This indicator helps to choose the right suitable equipment for example, the size of the expansion tank. In addition, this indicator is very important when antifreeze is used. It is usually sold in several forms:

• Diluted;
• Undiluted.

The first type can withstand temperatures - 65 degrees. The second will freeze already at -30 degrees. To buy the right amount of antifreeze, you need to know the volume of coolant. In other words, if the volume of liquid is 70 liters, then 35 liters of undiluted liquid can be purchased. It is enough to dilute them, observing the proportion of 50–50, and you will get the same 70 liters.

To get accurate data, you need to prepare:

• Calculator;
• Calipers;
• Ruler.

First, the radius, denoted by the letter R, is measured. It can be:

• internal;
• outdoor.

The outer radius is needed to determine the size of the space it will take.

For the calculation, you need to know the pipe diameter data. It is denoted by the letter D and calculated by the formula R x 2. The circumference is also determined. Designated with the letter L.

To calculate the volume of a pipe measured cubic meters(m3), you must first calculate its area.

For getting exact value, you must first calculate the cross-sectional area.
To do this, apply the formula:

• S = R x Pi.
• The required area is S;
• Pipe radius - R;
• Pi is 3.14159265.

The resulting value must be multiplied by the length of the pipeline.

How to find the volume of a pipe using the formula? You need to know only 2 values. The calculation formula itself has the following form:

• V = S x L
• Pipe volume - V;
• Sectional area - S;
• Length - L

For example, we have a metal pipe with a diameter of 0.5 meters and a length of two meters. To carry out the calculation, the size of the outer cross member of the stainless metal is inserted into the formula for calculating the area of ​​a circle. The pipe area will be equal to;

S \u003d (D / 2) \u003d 3.14 x (0.5 / 2) \u003d 0.0625 sq. meters.

The final calculation formula will take the following form:

V \u003d HS \u003d 2 x 0.0625 \u003d 0.125 cu. meters.

According to this formula, the volume of absolutely any pipe is calculated. And it doesn't matter what material it's made of. If the pipeline has many constituent parts, applying this formula, you can calculate separately, the volume of each section.

When performing a calculation, it is very important that the dimensions are expressed in the same units of measure. It is easiest to calculate if all values ​​are converted to square centimeters.

If you use different units of measurement, you can get very questionable results. They will be very far from the real values. When performing constant daily calculations, you can use the calculator's memory by setting a constant value. For example, the number Pi multiplied by two. This will help to calculate the volume of pipes of different diameters much faster.

Today, for the calculation, you can use ready-made computer programs, in which standard parameters are pre-specified. To perform the calculation, it will only be necessary to enter additional variable values.

Download the program https://yadi.sk/d/_1ZA9Mmf3AJKXy

How to Calculate Cross-Sectional Area

If the pipe is round, the cross-sectional area must be calculated using the formula for the area of ​​a circle: S \u003d π * R2. Where R is the radius (internal), π is 3.14. In total, you need to square the radius and multiply it by 3.14.
For example, the cross-sectional area of ​​​​a pipe with a diameter of 90 mm. We find the radius - 90 mm / 2 = 45 mm. In centimeters, this is 4.5 cm. We square it: 4.5 * 4.5 \u003d 2.025 cm2, we substitute in the formula S \u003d 2 * 20.25 cm2 \u003d 40.5 cm2.

The cross-sectional area of ​​a profiled product is calculated using the formula for the area of ​​a rectangle: S = a * b, where a and b are the lengths of the sides of the rectangle. If we consider the section of the profile 40 x 50 mm, we get S \u003d 40 mm * 50 mm \u003d 2000 mm2 or 20 cm2 or 0.002 m2.

Calculation of the volume of water present in the entire system

To determine such a parameter, it is necessary to substitute the value of the inner radius into the formula. However, a problem immediately appears. And how to calculate the total volume of water in the entire pipe heating system, which includes:

• Radiators;
• Expansion tank;
• Heating boiler.

First, the volume of the radiator is calculated. For this, it opens technical certificate and the value of the volume of one section is written out. This parameter is multiplied by the number of sections in a particular battery. For example, one is equal to 1.5 liters.

When installed bimetal radiator, this value is much smaller. The amount of water in the boiler can be found in the device passport.

To determine the volume expansion tank, it is filled with a pre-measured amount of liquid.

It is very easy to determine the volume of pipes. The available data for one meter, a certain diameter, simply needs to be multiplied by the length of the entire pipeline.

Note that in the global network and reference literature, you can see special tables. They show indicative product data. The error of the given data is quite small, so the values ​​\u200b\u200bgiven in the table can be safely used to calculate the volume of water.

I must say that when calculating the values, you need to take into account some characteristic differences. metal pipes having large diameter, pass the amount of water, much less than the same polypropylene pipes.

The reason lies in the smoothness of the surface of the pipes. In steel products, it is made with a large roughness. PPR pipes do not have roughness on the inner walls. However, at the same time, steel products have a larger volume of water than in other pipes of the same section. Therefore, to make sure that the calculation of the volume of water in the pipes is correct, you need to double-check all the data several times and back up the result with an online calculator.

Internal volume of a running meter of a pipe in liters - table

The table shows the internal volume running meter pipes in liters. That is, how much water, antifreeze or other liquid (coolant) is required to fill the pipeline. The inner diameter of the pipes is taken from 4 to 1000 mm.

If you have a specific design or pipe, then the formula above shows how to calculate the exact data for correct flow water or other coolant.

Online calculation

http://mozgan.ru/Geometry/VolumeCylinder

Conclusion

To find the exact figure for the consumption of the coolant of your system, you will have to sit a little. Either search on the Internet, or use the calculator that we recommend. He might be able to save you time.

If you have a water-type system, then you should not bother and carry out an accurate selection of volume. It is enough to estimate approximately. An accurate calculation is needed more in order not to buy too much and minimize costs. Since many stop at choosing an expensive coolant.