Pleasant bonus in your car: do-it-yourself table. Table car - the best New Year's gift for the driver table for the car with your own hands
Trips by car differ not only by the quality of the road, but also time on the way. Those who often overcome long distances and lost faith in roadside cafes, without at least a lung "snack" do not cost. And in this case the table is very useful. Even a ten-minute vacation with a cup of coffee and a sandwich will help, if in fact there is an opportunity, as they say, to eat humanly. That is, the sandwich is not on the front panel and there is a leaning glass with coffee, and all this on the table.
Such a car table can be made it yourself. Moreover, the place for its attachment is different: in the "Bardac" area, between the driver's seat and the passenger seat, behind the first chairs, that is, as in the plane on the back there is a standing chair.
Here the choice determines the owner of the car and space itself. And yet very by the way there will be a table in the car with your own hands.
Here is one of the options, and the simple and most, perhaps, easy to perform even for the one who will debut in this matter. But he suits to that car, which has a glass holder. It will take a piece of PCW and a piece of a pipe that is suitable for water supply. And definitely glue: All design elements are fastened with glue.
Such a homemade table will be inserted into the striking holder. Therefore, first of all, exactly measure its diameter. According to its size, they are selected in the Hozgazine:
Two knees with angles of 90 degrees; coupling; pipe; flange; glue.
And then the work process itself. Three parts of the pipe are cut off within 2-3 cm, and the entire design is mounted, but without glue, as it should be poured. The coupling must be very tightly fit into the glass holder, reach it. Perhaps you have to apply grinding. It should be borne in mind that when gluing the pipe will sit in the hole deeper, somewhere on 5 mm. If everything is fitted, it is necessary to degrease all the glued surfaces, smeared with glue, insert the pipe into the fitting and deploy it 90 degrees. All the extra glue erase the cluster.
Now case at the table top. The plywood sheet should be fitted under the intended size. On the surface to outline and cut (cut through) holes under, for example, a coffee cup or a roadbrack. You can under the legs of the laptop. It remains to plant and secure the tabletop to the flange. And the last barcode is aesthetic: acrylic paint from the can paint the table.
Second option:
https://www.drive2.ru/c/1243343/
Immediately I explain, mostly I go alone, without passengers. In order to avoid possible trauma passengers in the event of an accident, a table is made alignment.
It is located quite high above the knees, the input does not interfere at all (the nex's cabin is quite spacious in this regard).
How did you do-everything clearly in the photo.
I will immediately say, I do not master the driver, not a carpenter, not a joiner, and not even an engineer.
There is some kind of niche in the gazelle, here and we will collect ...
We will make a pattern from cardboard, we move to the Faneur and cut the jigsaw ...
We try ...
The table area is quite impressive.
From the remains of plywood we make sides of the table ...
and cupboard ...
Covered in two layers of lacquer (impregnations and I did not have), then the feathers ...
I used a field-spray. But you can and body in the canister (anti-agra'vi), the effect will be about the same. Analogs --- Rapator, anti-growing Body 950. Coating - elastic. Like rubber. Does not scratch. Wear-resistant. So more bodies of pickups are covered in order not to spoil from cargo ...
In three layers with intermediate drying, we throw the third layer with the effect of * pillings * ...
We put-look, attached to one bolt in niche, on a distant wall. (On the third photo it is visible).
Place under a glass with a diameter of -73 mm.
Many thanks to the author Aleksnext
Have you ever wanted to eat on the way, but could not find a place for this sandwich? Well, your decision! I present you a table in the car! In addition, I will show how to make a place for notepad and handles and how to do, if necessary, a set of boxes for gloves. Thank you, and I hope you enjoy!
First, you need to cut a big circle from plywood. My had about 12 inches in diameter.
Secondly, it is necessary to read out well from the sowing ages. Usually, the sandpaper is marked according to the size of the abrasive, for example 80,100,150. We begin with a coarse sandpaper and finish fine.
Now we paint "under the tree" and polish the rag.
The better the plywood is polished, the better the paint will fall.
After drying the one hand, go to another. Probably need to apply more than 1 layer.
While the countertop dries, cut a piece of CPVC (CPVH) pipe with a diameter? inches and 12 inches long. The edges should be cut exactly, at right angles.
With the help of spray, do you paint this tube and adapter? in? inches.
To facilitate the work, insert some rod into the pipe and stick it into the ground. Prayer in several layers with a break of 15 minutes to dry out the previous layer.
Choose a non-cast metal jar. Remove the sticker with the cans and remnants of glue with sandpaper.
Prepare it for coloring, reading the sandpaper. Color in any color on the choice, like CPVH pipe, and let's dry.
While the bank dries, with the help of another such bank, we draw 2 circles on the plywood and cut out. One of these circles can be paints on the one hand, like a worktop.
Select the drill according to the size of the pipe. I used 3/4 inches. Drill through hole in the center of two small round slices of plywood. If necessary, expand a little hole so that the CPVH pipe can pass through them.
Now drills a hole with a diameter? In. In the center of your table, but only half of the plywood thickness! This hole must accurately match the adapter 3/4 -1/2 inches. Glue 1/2 "end adapter into a hole. After that, we screw 2 small short screws from the inside for greater strength. Unfortunately, there is no photo for this step.
Take a dried jar and insert a non-colored round piece of plywood on the bottom. four
Then take the second piece and place it in the top of the evening with the rim of the cans painted part outwards. 2 screws secure Phaneur in the rim. Screws should not reach the hole in the center. Insert the pipe as shown in the photo. 
Connect the worktop and the finished leg.
Now you have a portable durable car. If it does not fit into the cup holder and too small in diameter, then compact with foam or something like that.
If the path needs a handle and paper, use velcro and silicone spray.
Cut the velcro, the desired size for the handle and paper. We apply a silicone spray on the back side of the prickly lips and glue them to the table and to the necessary items (pencil / pen and paper). four
Well, that's all, our small but the cozy table is completely ready. In my opinion it turned out well.
Have you never needed a table in your car? Maybe he was needed to have a snack while traveling by car so as not to put everything on his knees. Or he was needed to write something on paper. Unfortunately, the majority of cars do not represent, we have the opportunity to use the tables, as they are simply not. But there is a way out.
Any of us with the help of simple means can a small table that can be useful to us on the road. True, in order to secure the table inside the car must be cup holders. Unfortunately, not all models of cars have them. But if your car has a cup holder in the right place, then the assembly of the table is a very simple occupation. To do it, consolidating in the subsequent desk.
In order to make the table in the car we need:
- Round blank plywood
- two kinds of sandpaper
- 4 short screws
- PVC tube
- Knife for cutting Metaloplasty
- Roulette
- Spray paint
- paint for wood
- Drill and tree drill
- Can
- Pencil
- Marker
- vice
At the first stage, you must treat the round blank with sandpaper. Next you need to paint the round paint blank for wood.
In order for the paint to lay evenly and beautifully take advantage of the X / B rag.
Remember that for perfect plywood painting, you need to first apply one layer and wait for it to dry. Then you need to apply another layer.
After that, take the PVC tube and, measuring the necessary size, cut it with a special tool for metroplasty.
Next you need to paint the tube using spray-paint. You need to apply a minimum of 2-3 layers to completely and high qualityly paint the plastic tube. Remember that after each paint application, it is necessary to wait 15 minutes to dry the paint. After applying the last layer, the tube must dry at least 1 hour.
Take a tin used bank and remove stickers or typographical drawings from it using elaborate paper. Next, paint the bank spray paint to the color you need. Apply the paint, just as you painted PVC tube, not forgetting to give paint drying at least 1 hour after applying all the layers.
Before painting the bank, do not forget to remove the size (diameter) from it to make two wooden circles. While there will be a painted bank, you can make wooden billets in exactly the same dimension as the bank. As well as a big round blank, everything must be painted paint for wood.
After small wooden blanks are cut and painted, it is necessary to drill the hole in the center exactly the same diameter as PVC tube. After drilling, you need to expand a bit.
For those who spend a lot of time in their car, it often works in it and wants to make their lives more comfortable in such cases, a table that can be done is very useful - following the example of Michael Davis
For the manufacture of such a table, several PVC fittings and a portion of the pipe used for the water supply device are required. All items according to this technology are connected with glue, they are easy to process and cut, for example, with a metal hacksaw.
Cutting table and inserted into the holder for cups. Measure the inner diameter of the holder in your car - on this size it is necessary in the economic store to purchase two knees for 90 degrees, coupling, flange, pipe, glue. Michael uses Toyota Tacoma car (Pickup). In this case, the diameter of the pipe and fittings is 2 inches.
Cut the three small pieces of the pipe, 2-3 cm., And collect the whole design, without gluing, as shown in the photo.
The coupling must be tight to the bottom to the holder, so it may have to grind it. If necessary, part of the pipe can be replaced by the sizes that you are satisfied. Consider, when gluing, the pipe enters the fittings to several millimeters (about 5mm.) Deeper than before gluing. If all sizes are fitted - you can glue: degrease the places glued, smear them with glue, insert the pipe into the fitting and turn it on 90 degrees, excess glue to remove with a rag. This is what should happen:
The next stage is the manufacture. For this, quite, the sheet of plywood needs is suitable. Make holes for fastening the flange, fan, laptop legs. Attach the tabletop to the flange.
