How to use a baguette in your interior decoration? Ceiling baguettes (45 photos): elegant room decor effortlessly Decorating wallpaper in the form of a baguette

All photos from the article

Baguettes are used very widely and are suitable both for decorating the joints of the ceiling and walls, and for creating panels - wallpaper in a baguette on the wall can become the main highlight of the interior if their texture and pattern are well combined with the main coating. In this review, we will show you how to properly organize your workflow so that the elements hold firmly and look attractive over a long period of time.

What you need to work

Before starting the design, you need to stock up on everything you need, the list may differ, but in general, the main elements are unchanged:

Important! Since a modern baguette is made of expanded polystyrene, it may differ in quality, when choosing, pay attention to the structure, it must be fine-grained and very dense so that particles do not fall from it.

Description of the workflow

We will talk about two options for carrying out work, the first, when the baguette is attached at the junction of the wall and ceiling, and the second, when frames for the panel are constructed from these elements on the wall.

Ceiling joint decoration

With regard to this option, the installation instructions are as follows:

• First of all, the surfaces should be cleaned, it is best to glue the wallpaper in advance, firstly, the workflow will be easier, and secondly, you will not need to make the top perfectly even, since the baguette will still cover at least a few centimeters of space;
• Next, you need to take careful measurements in order to cut the elements correctly, otherwise the result of the work will not be very attractive, it is best to measure no more than two elements at a time to make sure that they match... After attaching them, two more parts are taken, etc. So you will proceed from the actual situation, which is much more convenient than cutting the material into the entire room and then finding discrepancies;

• Cutting with a miter box will not cause difficulties, the only thing to remember when choosing this device is that the tooth should not be as small as possible, this will ensure the best cutting cleanliness;

• As for gluing, you need to apply the composition either to the elements themselves or to the wall surface, based on what the manufacturer of the composition recommends... Be sure to lubricate the corner joints, since these places should be fastened as firmly as possible, some compounds must be left after application, and some are glued immediately, this nuance must also be paid attention to when working;

Important! Since the baguette is most often made of expanded polystyrene, if you press it with your fingers, grooves may remain on the surface, which will spoil the appearance, to avoid this, press the elements with the edge of your palm.

• After fixing, the excess glue is immediately wiped off, and the seams can be smeared with an acrylic-based sealant, it is well painted and sanded, this is the question of how to glue the baguettes to the ceiling and wallpaper can be considered closed.

You also need to tell how to glue wallpaper on baguettes, since sometimes there are situations when the elements are already fixed. Everything is simple here: when gluing, take the material with a margin so that it goes onto the element, after careful leveling, the excess part is cut off at the joint.

Indoor molding on the walls. Step-by-step instructions for attaching the molding. Is it possible to glue the strips on the wallpaper and how to fix the wood molding.

Wall molding

There is a large selection of design styles for decorating a room. They combine materials that can darken or enlarge a room. The use of molding has become popular because it is suitable for all premises.

The molding on the wall is glued just quickly. However, there are nuances when choosing a design, the choice of material.

Wall molding or wallpaper in a frame: use in the interior

Applying molding in the room, the room acquires originality and sophistication. You can divide 2 types of wallpaper with decor. By combining and choosing the color scheme of the wallpaper, the molding will complement and make the decor of the walls richer.

Designers use moldings to combine unsuitable decor elements, various types of wallpaper and paints or other wall and ceiling finishes into a single picture.

Decor is used in various rooms - kitchen, bathroom, children's room. And the ceiling height or square meters are not taken into account. It enhances the interior both in large rooms, highlighting special framed wallpapers, and in small rooms, creating a window frame or an entrance to another room.

In addition to highlighting other wallpapers, they frame a mirror, a wall painting, a picture.

A properly selected selection performs the functions of zoning, visually increasing or decreasing space.

When you can

Molding can be glued in many cases, when decorating walls and ceilings. It is used for:

• hiding defects on the surface;
• decorating the joints of the wall and ceiling;
• smoothing surface irregularities;
• give the room an attractive look;
• zone the room;
• visually expand or reduce the space.

The use of vertical molding increases the height of the ceiling. Horizontally glued stripes will visually expand the room.

In large rooms, wide stripes with an expressive pattern are used. This gives a certain historical value, brings notes of art and aesthetics. However, such stripes look ridiculous in a small room.

When you can't

You cannot glue the molding on the wallpaper. If you do this, there is no guarantee that it will last long. And you also need to be very careful with the glue, because if it stains the finish, then it is unlikely that it can be removed. Most often, the glued molding must be painted.

If you need to glue the molding to the wallpaper, then you need to choose an option from a light material - polystyrene, polystyrene.

Varieties

The molding is different in shape, textured pattern, material. Each species has its own characteristics and characteristics. There are wide stripes with an applied embossed pattern for large rooms, as well as thin light breaks used in the interior of small rooms for lightening and visual enlargement.

Wooden

Wood molding is valuable because of the material. Eco-friendliness and appearance make it an expensive finish. It is heavy, so the strips are fastened with self-tapping screws.

Wooden planks are not installed in rooms with high humidity.

However, after being treated with antiseptic agents and water-repellent mixtures, the finishing is applied in the corridor, on the balcony.

Polyurethane decorative overlays

The polyurethane finish is a value for money. It is popular because it has the following benefits:

• strength and long service life - about 30 years, polyurethane molding will decorate the walls and ceiling;
• ease of installation - fastening is done with glue;
• ease of cleaning;
• they are not affected by temperature drops;
• presented on sale in a wide range of colors.

Planks are used in the kitchen, in the bathroom, for zoning the room.

Metallic decorative strips

Decorative strips in silver, bronze and gold adorn the walls. They create an expensive beautiful interior of the room. With such a finish, the room looks rich, therefore, trims for precious metal and ordinary paper wallpaper are incompatible.

Decorating is done for mirrors, fireplaces, niches. To choose a color, you need a designer's consultation.

Wall foam baguette

The material is lightweight, with the following features:

• relatively low price;
• the weight of the bar is light;
• installation is carried out quickly;
• moisture resistant - can be used in bathrooms.

Finishing for those owners who want to hide wall defects and make the design of the room unique.

Gypsum moldings for a niche

The plaster finish has the following advantages:

• appearance;
• there is a possibility of restoration;
• environmental friendliness;
• does not lose its color over time;
• do not burn.

The downside is the price - they are relatively expensive. And a lot of weight, which leads to difficult installation.

It is not advisable to glue gypsum in damp rooms.

Plastic wall molding

Plastic baguettes are popular for several reasons:

• ease of installation;
• it is possible to paint it in the desired color;
• ease of care;
• not afraid of temperature changes and high humidity.

The disadvantage is the granular surface.

How to make a border for wallpaper with your own hands

Wallpaper dividing strips are used in the following cases:

1. Delimiting a canvas from the same material, but with a different pattern or color.
2. In large rooms, as well as studio apartments, there is a delineation of wallpaper as a separation of the boundaries between the kitchen and the bedroom.

Space zoning is one of the important functions of wallpaper edging.

Materials for making decorative baguettes

Basically, the decoration is glued to the wall. In rare cases, self-tapping screws are needed.

The choice of adhesive mixture depends on the material from which the bar is made, and the premises in which the installation will be carried out.

1. For light slats, PVA glue or wallpaper glue is suitable.
2. Gypsum planks are attached to a gypsum solution.
3. Planks made of wood do not stick to the glue for a long time.

Some types of glue for mounting:

1. Loctite PL 355 - moisture resistant glue, made in Germany. Glues light skirting boards and moldings.
2. Decomaster 250 is moisture resistant. Designed for gluing ceiling skirting boards and moldings.
3. Stayer Professional is a moisture resistant adhesive mass produced in Germany. Glue the finishing material at positive temperatures.

All types of glue are used for light finishing materials.

Work progress

Preparatory process. The walls should be flat. If there are strong differences, the finish will come off over time and a gap will be visible.

• clean the walls from dust, cover with a primer;
• markup using a level or plumb line (vertically);
• if the strips are wide, self-tapping screws must be used. For this, holes are made in the molding.

You can paint the finish only a day after the glue dries.

Fastening methods:

1. Sticking the trim on a bare, cleaned wall signifies a long service life. Even if you change the wallpaper, the planks will remain in place. In some cases, it is difficult to fit the wallpaper to the pattern.
2. Sticking strips to wallpaper - has negative sides. It is short-lived, but there is no need to customize the wallpaper.

For installation you need tools:

• hacksaw for cutting strips;
• miter box for cutting trim at a specific angle;
• construction glue gun;
• spatula (in some cases);
• sandpaper for grouting excess.

Molding installation

Before starting work, you need to measure the desired length of the planks and cut them. Cut corners with a miter box. After that, according to the markup, elements are glued in the corners. After that, flat strips are fixed according to the markings. If gaps remain after gluing, they must be covered with the same glue. All work is left for 24 hours to dry completely.

Wallpaper decoration

After the glue dries, the strips are painted in the desired color. At the edges, grout is made with sandpaper to remove excess glue.

After the work done, the wallpaper is finished. To do this, you need to measure the height and width of the canvas and carefully stick it back to back with the strip. It is necessary to ensure that the edge of the wallpaper is perfectly flat and fits evenly into the finish. The entry of the web onto the molding is not allowed. Then it is difficult to cut it off, there will be uneven edges and traces of wallpaper glue.

If the finishing was carried out not far from the corner, it is necessary to carefully bring the edge of the wallpaper to the molding, and then start it at the corner.

Molding in the room: how to decorate the space with decorative skirting boards

1. White planks on a dark wall. For this, the decoration is used not only on the wall, but also on the ceiling-wall, framing windows and door entrances, and furniture. This will make the room more spacious and brighter.
2. The light tones of the planks on the cream-colored walls. In most cases, pastel colors are used in large rooms, halls. For wall decor, framing paintings and mirrors, light-colored strips are applicable. They give a slight touch of sophistication and sophistication.
3. Colored strips - for children's rooms, corridors. Highlighting objects on the walls, the molding is painted in a contrasting tone or tone 2 darker.

It all depends on the appearance of the room, what exactly needs to be emphasized with the molding.

How to glue decorative frames in the bedroom

Bonding the frame does not differ in special nuances from the general stage of work. The room uses light colors to decorate niches and mirrors. You can make a picture if it will accentuate the interior and will be a calming element.

Finishing in the kitchen: decor

In the kitchen, the furniture set is being finished with moldings. White trim looks beautiful on a light background. For this, furniture planks of various widths are used. They are lightweight, they are mounted with waterproof glue.

Ceiling plinths are also applicable in the kitchen. If the wall cabinets are suspended just under the ceiling, then the border between the cabinets and the ceiling is closed with a molding.

Decorative inserts in the living room

In the living room, the decor can be on the walls, ceiling, doorway. But we must remember that if wooden doors are being finished, then the molding should also be wooden, and the plastic window is decorated with plastic.

Frame from baguettes in the hall

The frames are made of wide slats. Sometimes they use gold-plated metal. Wallpaper is pasted in the center of the frame, and the border between the baguettes remains white. This gives uniqueness, visually enlarges the room.

Interior decoration with molding: features of work

When decorating the interior, there are a number of features and nuances that you need to familiarize yourself with. This will save you from a number of mistakes, make the appearance of the room unique, and extend the service life.

How to paste under the wallpaper

Basically, the color of the molding is chosen not only so that it matches the wallpaper, but also emphasizes the design of the room.

If the wallpaper is of light colors, the room is large, spacious, then light colors of the planks are used.

However, when introducing dark tones into the design, for example, furniture, they make a contrast - highlighting the light wallpaper with a dark finish.

When and how to glue wallpaper

Wallpaper is glued when all finishing works are finished. That is, a day after gluing the strip, it is painted in the desired tone. After drying, grout is done, removing all excess. Only after that the wallpaper is glued. They must be glued neatly end-to-end with the molding. It is necessary to ensure that the edge of the canvas is even and does not go into the bar. Otherwise, the message will be spoiled.

How to properly glue frames from different materials

Almost all planks are glued to the base, with the exception of wood. It is fastened with self-tapping screws. After the markings are made and the strips are cut, according to the dimensions, the corner parts are first glued. It is necessary to ensure that the angle is even. After that, horizontal and vertical strips are attached to the corner elements.

For strength, holes are made in the strips for self-tapping screws. After drying, the screws are removed, and the holes are sealed with putty.

How to attach metal and wooden moldings for decor

Metal and wood planks are heavy. They are not mounted on glue. To decorate a wall or doorway, the strips are fixed with self-tapping screws and dowels. The step between the screws is determined based on the size of the bar, as well as its width, weight.

How to glue polyurethane frames from the baseboard under the wallpaper

Polyurethane strips are glued to the base using:

1. Liquid nails of white color.
2. Adhesive for polyurethane, for example "Oras".
3. Polymeric universal glue "Dragon".

All adhesives have good adhesion and a number of features.

In what cases the baguette is not attached to the wallpaper

Craftsmen advise against attaching the molding to the wallpaper. However, if the wallpaper has been glued recently, it is good to adhere to the surface, then the strips are attached to the canvas. But, there is no guarantee that the decor will be in place for a long time. Under its weight, it can peel off, while tearing the wallpaper.

Care

Molding does not require special care from itself. Dusting with a damp microfiber once a week is enough to maintain an attractive appearance.

Depending on the material from which the planks are made, chemistry may or may not be applied. Let's say that the plastic can withstand the general cleaning agent, but for the tree a polish based on beeswax is used.

Do not use a steam generator. Under the pressure of hot steam, the bar can deform, change its color or fall off.

The molding makes the interior of the room more expressive, bright, visually expanding the space. There are many ideas for the use of molding and they all differ in their individuality. The planks are easy to install and maintain.

Useful video

Baguettes visually look like skirting boards and are used to decorate the joints of walls and ceilings. They can have different shapes, colors, finishes and are glued end-to-end or on the wallpaper. It is easy to paint them with water-based paint, depending on the design tasks.

There are a lot of options for creating a variety of style solutions, you just need to choose the right baguette, and also choose good glue and carefully fix the products on the ceiling and wall.

Baguette glue - the choice of professionals

Modern baguettes are most often made not from gypsum, which is difficult to glue, but from polystyrene. This material is lightweight, easy to cut, transport and stick. Craftsmen use special adhesives for polystyrene.

1. Styropor Kleber.
2. Decofix Pro.
3. Titan SM.

Glue is applied using a special assembly gun, which allows you to accurately apply liquid nails in inconvenient places with minimal excess.

Transparent polyurethane adhesive produced in tubes is also used. They reliably glue baguettes, but you need to work quickly and accurately.

If the choice was made in favor of silicone sealants, you should know that after drying it will not work to paint them with water-based paints.

Adhesion will depend on the quality of the glue, but you also need to work with it correctly, so do not forget to study the instructions before starting work.

How to properly glue baguettes to the ceiling

1. Work begins with leveling the surface. Walls and ceilings with defects are carefully putty, after which a primer is applied.
2. Begin to glue the baguette from the corner. The end of the baguette is trimmed at a 45-degree angle to create an even, neat seam.
3. The adhesive is applied in an even layer along the entire length, as well as on cut corners.
4. Then the product is applied to the surface and pressed tightly. The 45 degree cut corners must match exactly to form the corner. The joints are also carefully glued.
5. After the glue has dried, you can start painting.

Question: glue baguettes in the corners

The craftsmen answer - when joining parts of the skirting board end-to-end, it is imperative to add glue and press it carefully against the wall in order to squeeze out the remnants of the adhesive. It is better to press down with the edge of the palm so that there are no dents from the fingers.

Remains of glue are removed with a damp cloth.

VIDEO ON TOPIC

This method is used when the wallpaper has already been glued and the baguettes need to be fixed on top.

In this case, the order of work is as follows:

• first, the ends need to be cut with a miter box,
• then apply a thin layer of glue on the surface,
• attach the baguette to the wall,
• press it down and hold it for the time specified in the instructions,
• remove excess glue with a napkin,
• seal the joints with sealant,
• the surface is painted with acrylic or water-based paint.

It is very important to be careful when painting, so as not to hurt the wallpaper, and even better to paint the baguette before starting its installation.

The finishing of the ceiling surface is almost always completed with the installation of a decorative skirting board, which gives the room a complete and harmonious look. However, this part of the work requires adherence to a certain sequence and technology, especially in terms of the design of the corners. In this article, we will look at how to glue baguettes to ceilings so that the repair is of high quality.

Features of using baguettes

In addition to the fact that ceiling moldings allow you to harmoniously arrange the transition from wall to ceiling surface, they also have a number of advantages, including:

• budget price;
• a wide range of sizes, shapes, configurations;
• the ability to use a decorative plinth with any kind of ceiling finish;
• flexibility allows you to bypass irregularities on the walls and hide them;
• ease of installation.

Depending on the material from which they are made, you can choose the following types of products:

• foam and polyurethane;
• plastic;
• aluminum;
• gypsum
• wooden.

Ceiling skirting boards can be smooth or embossed, narrow and wide.

Before you start gluing the ceiling molding, you need to decide what will be the installation of the products. Most often, formulations are used for expanded polystyrene materials. But there are other alternatives on sale:

• putty is often used to glue two surfaces together. The main advantage is that it not only reliably fixes the skirting board, but also allows you to immediately fill in visible seams and transitions;
• liquid nails qualitatively fix the plinth to the ceiling, providing instant adhesion of two surfaces;
• acrylic glue is used for mounting wooden skirting boards and foam moldings;
• silicone sealants are also used for fastening moldings, but they have a significant drawback - after installation, the exposed areas of silicone cannot be painted.

In order to make sure that you have chosen the correct composition, read the information on the instructions for the glue. Usually manufacturers indicate the type of material for which a certain type of glue is suitable.

In order to correctly install the skirting board, it is necessary to make markings on the wall surface. This step can be skipped if all angles in your room are strictly 90 °. For a large work space, it is best to start at the corners. Prepare a solution of water and soap in advance, a small sponge and a spatula.

The algorithm of actions will be as follows:

• Apply a small amount of glue to the edge of the skirting board with a spatula, carefully coat the joints of the elements;
• work carefully so that no glue gets on the front side of the skirting board;
• attach the baguette to the surface, press it firmly;
• immediately remove the protruding glue with a sponge dipped in soapy water;
• after you have pasted over the entire perimeter of the ceiling with plinth, seal the seams between the individual parts with putty.

We are talking about when the walls have already been decorated with wallpaper, and on top of them you need to stick a baguette on the ceilings. In this case, the order will be as follows:

• the ends of the plinth are cut with a miter box;
• the reverse side of the plank is coated with glue;
• apply the product to the wall and, slightly pressing down, hold for as long as indicated on the package for the glue;
• excess glue is removed with a sponge;
• the joints are sealed with a silicone-based sealant;
• if necessary, the plinth is painted with paint.

With this method, care must be taken not to damage the wallpaper. If it is planned to paint the baguette, it is better to do this before starting its installation.

In this case, the peculiarity of the work is that first, the baguettes are glued to the ceiling, the cracks and gaps are closed with the help of a putty mixture, and after that they proceed to finishing the wall surfaces. In this case, it is necessary to very efficiently bypass the line of gluing the baguette. Even the slightest shortcomings of subsequent repairs that were made in this place will become noticeable. If you are not confident in your abilities, then glue the baguettes on the ceilings after the decorative wall decoration.

Docking the plinth in the corners is the most difficult stage of work associated with their installation.

Important! In order not to spoil the material, adjust the last straight plank to size after gluing the corner.

If in your room all corners are strictly 90 °, the following recommendations will help you to properly cut the baguette:

• place the baguette in the miter box exactly as it will be located on the wall surface;
• press the lower part of the plinth firmly against the wall of the tool;
• with a miter box to the desired size, cut off the fillet parts that will join in the corners;
• use a construction blade to process the extreme sides of the parts to the end;
• check the evenness of the joints by applying the elements to each other at right angles so that no burrs remain. Otherwise, there will be gaps at the installation site.

To glue the baguettes in the corners of the room, proceed as follows:

• cutting off the end of the products, attach the fillets to each other, check the place of their joining for gaps;
• trim off interfering areas with a knife;
• coat the skirting boards with glue, attach them to the wall surface. If the adhesive requires curing, wait for the specified amount of time.

Ceiling polyurethane or plastic skirting boards are usually white, so many people want to give a different shade to the baguettes, which will suit the style and design of the room. There are several other reasons why it becomes necessary to paint the glued skirting board:

• often on the surface of the baguette there are small defects in the form of scratches, dents, especially manifested in bright light;
• the loose structure of the material does not always look aesthetically pleasing. Skirting boards are easy to paint, so you can successfully mask this flaw;
• over time, the white fillets lose their original shade and turn yellow. Painting and decorating will easily eliminate this defect;
• applying a layer of paint will help hide the joints formed during the installation process;
• It is recommended to cover wooden baguettes with varnish or special impregnations. This will not only make them more attractive, but also extend their service life.

Before you start painting, you need to choose the right paint. For foam products, water emulsion and acrylic compounds are best suited.

If you want to make an original interior, use glaze - these are special paints with which you can get a different texture on the surface of the baguette - natural wood or stone, patina, gold, etc.

It is better to paint ceiling skirting boards before they are glued. In this case, you can use not only ordinary paints, which are applied with a brush, but also sprayers.

The paint is usually applied in two coats for best results. In this case, before applying the next layer, the previous one should dry well.

• measure the perimeter of the room:
• divide the resulting value by the standard length of one baguette (2 m);
• round the result up;
• add two or three more items in case of emergency (damage during installation or transportation).

The variety of shapes and types of ceiling fillets often confronts buyers with difficulties, then they need to choose the right product. After all, your own preferences do not always correspond to the chosen direction in the interior. In order not to be mistaken, pay attention to the following tips:

• for narrow and long rooms, choose wider fillets;
• in a low room, a thin plinth under the ceiling will look better;
• minimalism will emphasize a modest white baseboard; for lush interiors, you should choose pompous baguettes that imitate stucco molding;
• if the plinth matches the color of the walls, this will visually lengthen the room, match the color with the ceiling - the walls will become noticeably higher;
• as for the material, it all depends on your financial capabilities. The cheapest are foam and polyurethane skirting boards, the most expensive are wooden and aluminum moldings. In any case, you can always paint the product in the desired color.

It is not difficult to properly glue the baguette to the ceiling. The main thing is, before starting the installation, study the features of the products and choose a reliable glue.

Related Videos

Nothing makes the transition from wall to ceiling of a building more aesthetically pleasing than a refined frame made of aesthetic and practical plastic. The question of how to glue a plastic molding is relevant and, if necessary, hide small imperfections after repair. The presence of such an interior detail opens up additional opportunities for improving the appearance of the room.

More practical than wood. This material is easier to clean and retains a presentable appearance longer without additional maintenance. The plastic edging is much lighter in weight, so the installation of its structure is technically easier. In addition, the price of plastic as a baguette material is significantly lower. This is especially important if you are purchasing ceiling frames for finishing office or public premises, and it is desirable to save on materials.

Stages and features of gluing plastic baguettes

The traditional technology for gluing a baguette ceiling frame includes several steps. It:

1. Surface preparation for gluing.
2. Carrying out the necessary calculations.
3. Cut to the desired length of the baguette blank.
4. Direct mounting.

The technical nuances of baguette gluing may vary depending on the type of surface. If the frame is glued to the wallpaper, less adhesive should be applied to avoid staining and softening of the wallpaper. When gluing under a stretch ceiling, it is best to attach the interior frame to the wall so as not to damage the delicate surface of the ceiling. The most practical option for a baguette for most of these structures is a ceiling plinth.

In order for the baguette edging to hold securely and look impeccable, the installation must be performed correctly at all stages of work.

Surface preparation

The first step in gluing baguette edging is to prepare the work surface. Before gluing the decorative panel, the surface must be well cleaned of dust, remnants of the old coating (paint, wallpaper, whitewash) and leveled possible gaps with priming. In many cases, additional filler is required.

The main task of the preparatory stage is to increase the bearing capacity of the surface on which the baguette panel will be held. Applying a coat of primer will greatly improve the adhesion or adhesion rate. If you properly prepare the wall before gluing the plastic moldings, it will greatly save the consumption of adhesive and provide an excellent fixation of the frame.

Calculations and markup

If each corner of the workroom is exactly 90 °, a standard miter cut is sufficient. Marking work becomes more difficult if the task of the baguette panel is to hide room flaws at the junction of the ceiling and walls. To calculate the required amount of material and markup in a room with non-standard angles, you need to attach a piece of baguette to the corner between the ceiling and the wall, and then draw lines along the bottom and top of the piece.

The main value to be guided by in this case is the intersection of solid lines on opposite sides of the corner. These places are indicated by marks on the baguette opposite straight lines. Accuracy and aesthetics of the joints are important indicators of the gluing quality.

Cutting part of the baguette

You can use a plastic hacksaw or a knife with special blades to cut the desired piece of material for the decorative panel.

After the necessary pieces have been cut off, it is imperative to check the accuracy of the angle by folding the two parts according to the previously drawn marks (inner and outer corners). The slightest inaccuracy should be "smoothed" with sandpaper or a knife, otherwise a gap may form. An electric jigsaw is also suitable for this purpose, especially when working with "curly", volumetric panels.

It is also possible to cut baguette blanks when fastening, but this is much more difficult, more time-consuming and more time-consuming. Therefore, it is better to glue pieces that fit perfectly to each other, and not engage in correction during installation.

Installation nuances

It is best to start gluing the baguette edging from the corners of the room - this is the basic and most painstaking work. Straight parts of the required size are glued much easier. When applying glue to the edges of the workpieces, make sure that its excess protrudes outward. The more uniform the layer of the applied adhesive, the better the plastic will "grab". The protruding excess is evenly distributed along the edges with a brush, and the residues are washed off with heated water and soap or solvent.

When the panels are already glued, you need to pay attention to the processing of the joints. They are lightly putty and sanded with sandpaper. After sanding and drying the glue, if necessary, you can paint the mounted molding.

Choosing an adhesive for a baguette panel

How to glue a plastic baguette chosen from the rich collection of the ART-BAGUETTE online store? Many experts recommend using "liquid nails" for this purpose - a special construction glue that is designed for any weight of parts. "Liquid nails" are made on a neoprene or water base. This adhesive is universally compatible with a variety of surfaces. It is preferable to apply it with a pistol.

Other options - glue "Dragon", "Moment", Bostik Vinycol 1520, "Khimkontakt-Desmokol" based on organic resin, specially designed for soft plastic "Sekunda Vinyl". Whichever glue you prefer, you should avoid getting it on the outside of the baguette.

Easy gluing and excellent results!