Options for plating wallpaper two. How to beat the wallpaper of two types (combination). Selection of individual structures, niches and protrusions

On how to punish the wallpaper of two types competently, not every specialist will tell. Nevertheless, it is not so difficult - the walls of the walls are standard. And the design options exist very different - you can choose exactly the one that best will fit into a specific interior.

The design of the premises with wallpaper was widespread. This material is convenient for incarnation even the most bold design solutions.

Wallpapers have many advantages, they can:

Denote zoning;
Provide the necessary visual effects;
Interestingly and stylish decorating the room;
Make repairs inexpensively and beautiful.

In order to achieve the desired effect, it is not enough to stick the wallpaper you like. There are examples of unsuccessful gluing them. It is important to comply with the basic rules guaranteeing success.

We are talking about a competent combination of colors and textures, the correct techniques for gluing this material and the corresponding selection of wallpaper types for one or another room.

Wallpapers of two types in the kitchen interior (video)

How to punish a room with different wallpaper and pick up the "right" colors

You can come up with different variants of the combination of wallpaper.

At the same time, the basic rules should be followed - they will help to avoid stupid errors in the design:

Combining wallpapers of different tones and one color scheme.
Compound of monotonous wallpaper of contrasting colors.
Casting paired with monophonic wallpaper of such stripes to which a bright ornament is applied or a motley pattern.
Use of wallpaper with different drawings.

By issuing the wallpaper, you can achieve a simple, and complex combination of colors. In the first variant, the colors will simply complement each other. And in the second they can connect to shades and smoothly move from one tone to another.

A competent combination of textures is an important component of the blending of the wallpaper of two species

Before you punish different wallpapers, you should think well from which materials they should be made. First of all, it is necessary to repel from how you manifest themselves in practice. For example, some wallpapers should not be used in the kitchen or in the bathroom, and there are such species that will fit only in the most exquisite and luxurious interior.

Types of textures can be the most different, these are the most common of them:

Paper;
Vinyl;
Fliseline;
Textile;
Liquid.

The main thing is to think about the textures, focus on the same thickness. This will prevent the occurrence of non-accurate seams and joints.

Wall pastries with two colors: Popular and successful solutions

There are different options for combining wallpaper. Some allow you to successfully zonate the premises, others complement the design, and the third help to hide the irregularities of the walls. Bold and gifted designers constantly come up with new design options. After all, it is not only convenient to use wallpaper for this, but also incredibly interesting.

Here are the most common techniques for combining them:

Vertical stripes with different pattern stick to the walls alternately. Such design options help to lengthen the visual premises regardless of the color solution. For this option, the stickers should select the wallpaper of the same texture so as not to spoil the interesting design of non-accurate seams. A game with color and so will attract a glance, and the change of textures will be overwhelmed. The width of the bands is usually also the same in the same way.
Horizontal strips - good reception for visual expansion of the room. Good such method to use for rooms with high ceilings. The wall is conditionally divided into two horizontal parts. The wallpaper of one species paste on the bottom strip, and on the top - the other. With a horizontal division, you can take wallpaper with a variety of colors. It can be patterns, symmetric patterns, as well as monochrome colors.
Method of small inserts: The walls mark the zones on which the wallpaper of the necessary color is placed. Such zones usually have forms of geometric shapes. After directly stickers, the wallpaper inserts are most often framed by a border or molding. Such ideas are relevant in rooms where you need to draw attention to some object of the interior - painting, mirror, TV. This method of design of the premises is convenient because the wallpaper inserts can be made on the walls of the walls are saved or stained.
Many designers make large-scale bulk inserts - in the size of the whole walls. Beautifully decorated in this way of room using photo wallpapers. Today's choice is so high-quality samples that sometimes they are even difficult to distinguish from the original works of art. The method of large-scale insertion can be achieved to achieve a spectacular allocation of a whole wall, and when the wallpaper sticker and the ceiling is the original zoning of the room.
Patchwork technique: wallpaper with different patterns are cut into small pieces of the same shape and glued. Wall design options can be the most different. This method allows you to wonder the cloths of various colors and textures, while the wallpaper must be very good with each other. They can be cut into squares, rectangles and even triangles. To perform the technique of patchwork wallpaper strips of glue and braziness, and online.
Selection of the relief of the walls. It is interesting to attach niches and protrusions with only two types of wallpaper. If it is competently distinguished by such structures with more saturated or deep tones, it will be possible to make an interesting focus on relief wall changes.
Cutting walls and ceiling. The performance of the wallpaper of the walls and the ceiling in two colors will be successful only if the height of the ceilings is at least 2.7 meters.
Parking the corners of the room. Visitiously increase the room will help the pasting of its corners with wallpaper of a darker color when covering walls with strips of light tones. The technique of angular combination is admissible if the design does not require strict laws in the design. Good such options are used in rooms with angular furniture.

For those who want to place a room in bright colors, it must be borne in mind that they can cause fatigue and irritation

Wallpaper of two colors in the interior of the living room (video)

Basic rules for combining wallpaper of two types

Simple and understandable rules will help better understand how to punish the wallpaper of two types and thereby achieve the realization of interesting ideas in design.

Here are the main of them:

The color solutions of the premises should be used not only on the wallpaper, but also to be reflected in furniture, textiles or accessories;
If the main wallpapers are made in bright colors, then the optional version must be muffled;
If a floral pattern is applied to the main wallpaper, then in a pair they can choose a textured component;
Wallpaper with a geometric pattern is well combined with abstraction;
To wallpaper with patterns, it is best to select one-photon fabric;
Bright colors should be combined with muted shades;
Triple combination is also possible, and successful combinations make the interior especially interesting.

How to glue two species wallpaper

Wallpaper sticking is simple, but requiring certain knowledge. If the room is glued in the room with two types of coloring or invoice, the rules act the same as for standard wall salaries.

It is important to take into account that different textures require the use of certain types of glue.

The jack of joints is necessary if the wallpaper of different textures are used.

To do this, you can purchase special funds:

Moldings;
Reiki;
Tapes;
Borders.

It is important to preliminarily prepare walls even before placing the room with wallpaper. Each wall, you need to clean from old paint or wallpaper, remove the remains of plasters, sharpen and clean it. Depending on the type of wall strips of walls, the walls are grinning more or less carefully. If in the room raw, you must use drugs from mold.

In order to competently combine the wallpaper, there are some more secrets.

The main ones are:

It is best to choose the glue in the same store where the wallpaper is bought.
You can independently select the width of the bands in the wallpaper.
Determining the boundaries of the joints need to be pre-measured and marked with a pencil.
Wallpaper paste begins on top, and then the bottom stripes are already glued.
It is necessary to make allowances for the seams in the case if the bands are boosted when dried.

How to combine wallpaper (video)

Right and tastefully decorated in an apartment or house every time guests will delight guests and owners. After all, it is from this room that the first impression of your accommodation depends. Here you spend most of your time, relax with your family, watch TV and meet guests.

Create the most comfortable, light, stylish and bright interior of the hall - the task is not easy, so if you do not have time and financial opportunities to choose a special design, try using some of the original ideas that we are talking about this article.

Features

It doesn't matter what wallpaper you have chosen, and how to glue them, the main thing is that it is necessary to do it extremely carefully. Errors are exclusive when sticking wallpapers in the bedroom or corridor, but not in the "heart" of the apartment where family events and meetings with friends are held. To avoid mistakes in the work, you should remember some tips.

Wallpaper sticking in the room means you will meet with different complex areas in the form of radiators, switches, sockets. Corners are also not the most pleasant places with which you can nourish.

Pick wallpaper for sticking with a small pattern. If the canvas with a large pattern, or the distance between the drawings are decent, then the consumption of the material will be much larger, because it will go when it is adjusted.

As soon as you laid out the wallpaper, the length was measured, compared whether the drawing coincides, be sure to correct them to avoid mounting in the wrong sequence. Starting wallpaper blending follows from the window, no matter - on the left or right side, as you are convenient. To properly glue the wallpaper in the corner, it is necessary that the canvas came to the next wall at no more than 30 mm. If more - cut up too much.

When it comes to sockets and switches, you will need to unscrew them for convenience. When sticking the cloth on a socket or switch, make two small diagonal cuts in this place. Then carefully cut a small piece of wallpaper, leaving a little scatter. It can be carefully removed under the socket or switches. As soon as they coped with it, you can safely fasten the fasteners.

Do not forget to turn off the electricity in the apartment at this time.

With batteries, things are more complicated. Although, if you use the smell and cunning, you can cope with the shook wallpaper very easily, without errors. Starting from the top of the battery and to the bottom of the canvas, it is necessary to make several cuts diagonally. This will allow you to manage wallpaper as it is convenient for you. And the seams per battery will not be noticeable and the appearance of the room will not spoil.

If you coped with the blowing hall, you can safely move to the next room or arrange furniture and enjoy repair.

Master class on the right shook wallpaper look next.

What to choose?

Today there are many options for wallpapers for walls in the living room, even the cheapest wallpaper samples can look beautiful and stylish. However, there are many items that should be considered by choosing this finishing material.

Durable and high-quality wallpapers are vinyl, bamboo, metal, textile and others. The main thing is to remember that there are no absolutely perfect rolled cloths, they all may have their drawbacks. Thanks to their diversity, you can choose those that will suit all your requirements:

Paper Wallpapers belong to the category of light and cheap materials. They are just enough to attach the room. But they do not hide the flaws of the surfaces and quickly lose their "freshness".
Fliselinovye Wallpapers can also be used for an acceptable price. They have good heat and sound insulation. Hide the irregularities of the walls.
Especially popular now enjoy photo wallpaper. The choice is quite diverse, they look good and modern and, importantly, sold at an affordable price.

Wallpaper under painting - Very comfortable and practical option. They are able to refresh your room. They can be covered with paint more than once.
Vinyl Wallpaper is distinguished by their strength. They are moisture-resistant and embossed. However, not everyone may afford such a canvase. They include expensive materials, which is reflected at the total cost of wallpaper.
Textilewallpapers are considered one of the most expensive. Their production uses natural materials. Due to this, they do not have joints on the walls.

To make it easier for you to understand what kind of wallpaper samples are suitable specifically for your living room, several light rules should be observed:

it is necessary to take into account the parameters of the hall, such as the height of the ceiling, width of the walls, and even lighting, features of the planning, style of the room, own character traits;
choosing a wallpaper for the hall, it is worth considering both their wishes and the position of the room regarding the parties of the world. For the northern and eastern rooms, warm and bright colors are suitable if the room is on the southern and western side, it is better to choose the colors of cold shades;
the main thing is to decide which style of the interior you like, and then pick up the drawing and type of wallpaper, taking into account the idea, design and design.

Remember that the lighting and location of windows in the room can also affect how one or another color will be perceived in the interior.

When choosing wallpaper, Do not forget about the style and color of the furniture.If your furniture you have dark flowers, specialists advise attaching one or more walls with light canvases, while others are dark. Contrast is an excellent reception that will always be in fashion.

Color gamut and prints

Color gamut that will become the main in the room is almost completely predetermined by what the wall decor will be. It is worth remembering that it is better if the coloring of the wallpaper will be repeated in the interior, be it furniture, doors, gender, ceiling or decor items.

The warmth is considered to be the dominance of red, yellow and orange tones, cold - the predominance of blue, blue and lilac. Most often they advise not to combine warm and cold color. It looks no harmonious, you can hardly be comfortable in this room.

It is better to try to combine cold and warm tones with neutral. In the extreme case, the room should be issued only in one color scheme.

It is not worth decorating the walls with two different types of wallpapers of saturated shades. It is better to combine bright and juicy color with neutral. The same situation with the canvas on which there is a drawing. It advise to combine wallpapers with a calm and concise design.

A small step to the side of the color you thought can change the overall picture not for the better. If you decide to arrange a hall with two types, then, if possible, take them in one store, so that there is an opportunity immediately and accurately choose harmoniously combined textures and colors. The easiest way to choose the wallpaper of the same type. Coloring at your discretion.

Wallpaper of light tones or with a vertical strip will help to expand a small lounge with a low ceiling. To avoid toughness and the gullshooting in the room, you should not use the wallpaper with large contrasting patterns. No need to worry that the room will look boring. Remember, the classic will never come out of fashion.

Large rooms can be arranged both light and dark wallpaper. Light tones emphasize free space, dark shades will provide the ability to visually reduce the room to a more comfortable size.

The hall is the room where you relax, meet guests and conduct the main time. Therefore, it should not make a room with shades that contradict each other. For example, combine bright red and blue or pink and yellow. For the living room, a combination of beige and brown, red and white, gray and blue will fit well. Such colors will create maximum comfort in the interior.

Remember that the choice of wallpaper needs to be suitable as serious as possible. It is worth considering both their preferences and specialist advice:

a small living room is better to arrange in pastel colors. For example, mint, lavender or pink color;
for a cool living room, apricot, strawberry, peach tone of wallpaper is well suited. Such colors will help create a comfort and warming atmosphere.

Just remember that warm tones visually can reduce space.

if the living room is distinguished by its high temperature, then aquamarine, pale blue, mint or lilac colors will be appropriate here;
southern, oriental, southwestern and southeastern rooms look well in classic shades of gray, blue and blue;
expensive and stylishly watch pearl, silver, golden kel;
in the hall they will look good green, burgundy, cherry paints. They will give a special atmosphere, add brightness.

Decorate the living room, make it special help prints, print on wallpaper. Now you can print on any surfaces, including on the wallpaper. And there are so many options that you don't have to invent yourself. Today, animals, floral and newspaper prints are considered the most popular drawings on the wallpaper. However, a bright flower print is better to make only one wall, otherwise it is somewhat in one big drawing and will not become a highlight of your room.

You can arrange your room as you want. You can glue the walls of the paintings in any style or posters with celebrities. Recently, stickers and vinyl stickers have become popular.

Combination

The popularity of this method of pasting walls, like combination, is becoming more and more popular:

First, it's fashionable now.
Secondly, you can save one room with different types of wallpapers in case you do not decide on one color.
Thirdly, you can split space into several zones.

Now many connect the living room with a dining area. It is very important to zoning the room. With the help of combining different wallpaper, you can separate the kitchen from the living room or the living room from the bedroom in the event that one room is used both as a bedroom, and as a place to meet guests.

New-fashioned trends in the design of the design of the room with wallpaper, do not exclude the use of a classic style involving monochrome decoration. However, in recent times, the option of double finishing is increasingly. What makes it possible not only to give the placement of individuality, but also to resolve the issue of zoning. The article will talk about how to punish a room with two types of wallpaper.

Types and combination of wallpaper

Wallpapers are the most common option for design walls in apartments and country houses. This is connected with a number of reasons:

simplicity and speed of the process of decorating the room;
quality wallpapers can not be changed for several years after the repair;
a variety of color palette and material texture.

Selecting the combined options for the decor, it is necessary to take into account the qualitative characteristics of various types of material:

paper. The most common and affordable type of wallpaper is most common. Scope: Guest Room, Bedroom, Cabinet or Children. The service life of a similar material is about five years. According to the method of production, paper wallpaper can be divided into two main groups: simplex (technology of manufacturing a single-layer version) and a duplex (improvement of the quality of the material through the use of a two-layer system);
vinyl. In the process of manufacture, a paper base is used to be applied special vinyl coating. The finished product has a necessary margin of strength and ability to stretch. This option is ideal for indoor use with high humidity - kitchen or bathroom. In addition, care for the coating is simplified due to the detergent properties. Different durability and color quality material. Shelf life can reach about 15 years. And on a properly prepared surface, the joints will be completely invisible. Vinyl wallpaper options presented in the building materials market only three:
- shulkographic flat vinyl;
- volumetric foamed;
- washable kitchen version;
fliseline. The most appropriate solution for the premises located in the newly built building. The reason lies in the residual landing. Wallpapers have special strength and elasticity due to vinyl coating. Therefore, any kind of deformation of the wall surface under the material will not affect its integrity. In addition, phlizelin wallpapers are designed for repeated staining. A similar type of material is ideally combined in vinyl;
textile. Option of expensive and stylish finishing of premium class. Wallpapers, as a rule, have the basis of phlizelin or paper, and the surface is covered with a cloth (silk, flax, viscose, natural or artificial fibers). A moment that is worth considering when choosing such wallpapers, this is a need for additional care. Not all options presented on sale have moisture resistance. The most successful combination is with phlizelin or paper wallpaper;

vellar. In the process of manufacturing on the paper basis various particles of small sections are applied: Fabric or sparkles. The process of salary is quite complicated. Material can be painted. In the interior, velor wallpaper is best combined with textile or paper.

Advantages of a combination of two types of wallpaper in the interior

There are a number of tasks that are solved when using two types of wallpaper in the room:

decoration of space;
practical solution of problems with constructive disabilities and lighting;
visual change in the proportions of the room;
creating an art object on one or several walls;
formation of style unity;
concentration of attention to the winning part of the interior;
compliance with taste and aesthetic preferences.

A wide range of wallpapers, presented on sale, allows you to solve the above tasks, thanks to the diversity:

color forms;
patterns (material with a pattern or under painting);
textures (smooth, with 3D drawing, relief);
surface quality (matte, imitation of other materials, brilliant);
manufacturer material (polymeric, natural, fresco plaster, textile);
the method of pasting (for glue, self-adhesive option, liquid).

How beautiful to punish the wallpaper of two types

In order to competently combine in one room with two species at once, you do not need to have special experience, it is enough to determine the taste preferences and choose the combined option.

The popular trend of double design has influenced the building materials market. Currently, a sufficient amount of wallpaper types are produced, similar to the texture and color scheme.

Double finish is the most common option involving solutions to many tasks, among which there is a light and separation of space. Successful is considered to choose wallpaper of different types, but from one collection. This can not be mistaken with the combination of materials and textures.
In the process of work, the wallpaper with a saturated shade and a bright pattern is pasted on the most illuminated wall of the room. While the walls entering little light should be taken out with light wallpaper with a small pattern or a monochrome background.
In addition to the lighting solution, there is a need to comply with stylistic dynamics. A sharp contrast of textures or patterns can result in oversprint with elements and complicate the interior.

Options how to beat the wallpaper of two types

Vertical way

The most classic way to combine the wallpaper of two species in one room. The popularity of such a method is connected with the simplicity of walls of walls, and the ability to visually raise the height of the ceiling.
A vertical method involves the alternation of two panels, completely different in color parameters, pattern and surface quality. The basis should be the principle of a contrast or adjacent combination.

Bloom the wallpaper of two kinds of photos

At the same time, the combination can take the following options:
- simple style (harmonious supplement base color);
- complex (combination of different colors and textures);
- designer (use of a non-standard approach in comparison of material and colors using contrast).
Vertical location of wallpapers, both symmetrical and asymmetric relative to the composite center, dilute the monotony of the surface. It is possible to combine monochrome and multi-colored wallpapers, with small and large pattern of similar rapport, with stripes or peas.
Regarding the selected pattern, it is possible to use methods for sticking online or brakes, with edge, cropped ladder or wave-like.

How to beat the wallpaper of two species with a horizontal way

The horizontal option is designed to separate the surface of the wall into two equivalent or asymmetric parts. In the lower area, a dark or saturated tint is glued in the lower area, and the top is light tones. Such a combination creates the effect of panel cladding.

With this method, you can efficiently adjust the ceiling height. A similar effect is achieved thanks to the placement of the bottom edge of the Bordur wallpaper. In this case, the ceiling is visually lowered.
Note: The horizontal docking of the wallpaper involves accurate determination of the pasting level. Otherwise, the docking line will contrast with the level of furniture.
It is important to take into account the width of the canvas, as it is directly dependent with the height of the lower part. In addition, the finishing work technology implies the sticking of wallpaper from top to bottom, the edge goes with puff and is cut with a building knife. This is necessary so that after drying between the strips, the gap is not formed.
Another rule of such combination can include the following fact: dense, textured wallpaper must be placed at the bottom, while thin and glossy - in the top. This will preserve the integrity of the coating for a long time.
An alternative option for designing the bottom of the wall can be cork covering, artificial stone or decorative plaster.
But the curb, wooden rail, polyurethane molding or decorative frieze can be used as a separation material.

Patchwork combination

It is a combination of horizontal and vertical technique. The result becomes a unique combination of rectangular fragments of various sizes. The process is based on the idea of \u200b\u200bpatchwork mosaic, similar to the patchwork sewage - patchwork. The decorative feature of such a combination of the wallpaper of two types is perfectly fit into the interior of the children's room, suitable for the spatial release of the dining area in the kitchen space and country rooms.

Different fragments of wallpaper with a wide range of patterns, colors and drawings are combined into a decorative composition, which has a chaotic or ordered view. You can use bright accents or compare wallpapers for smooth transitions. To harmonize the final composition, it is necessary to use neutralizing shades: black, gray or white.
To perform work, you will need wallpaper with the same thickness parameters, and a large amount of joints involves using only paper material.
Inserts from wallpaper. In the decor of the room used and fragmentary sticking of wallpaper. Forms can be the most diverse from the correct geometric shape to unique samples. Causes of coloring uses options with an expressive ornament or pattern, as well as monochrome wallpapers.

Wallpapering of one zone

The priority tasks of this style are the design of the walls in the style of Baroque or preparation for the grinding of paintings, to give the style of classicism style.
The use of geometric inserts will introduce a note of neoclassicism into the interior. For completed species, plank or molding inserts are used, which are an integral part of the composition.

shelves;
art paintings;
family photos;
lighting devices.

If necessary, focus the entire space on the size or functional properties of the interior object is used, inserts from wallpapers, occupying a tangible site, up to the use of the ceiling area.

How can you beat the wallpaper of two widows photo

In each, separately, the room has sections that need extraction.

How to Choke the wallpaper of two types in the hall.In the living room, as a rule, a fireplace area is distinguished, place under the placement of the TV, bar counter or floor lighting.

Dining room Requires the separation of the area of \u200b\u200bplacing the dishes and dining table.
How to shove wallpaper in the bedroom of two types.It is most often decorated with a zone where the headboard is placed.
When pasting different wallpaper cabinet The working area is highlighted.

How to beat the hallway with two types of wallpaper.Here it is customary to use a horizontal method when the bottom of the wall is covered with darker wallpaper, and the border is separated by a decorative border.

In all options there must be a contrast effect, in this case the inset will focus on the semantic object. In addition, the insertion from wallpaper help to hide certain wall defects, for this use material with a complex geometric pattern.

Photo wallpaper

Of course, to some extent, the photo wallpaper has lost their popularity, however, modern options can be a unique art object in the interior of the bedroom or children's room. A similar inset not only copes with a spatial orientation, but also can reflect the taste of the apartment owner or at home.
The development of digital photos was largely reflected in the number of high-quality photo wallpaper, which allow you to create an exclusive interior option in the room of any area. To date, this is the most popular way to punish the wallpaper in the living room of two species.

Practical combination of wallpaper

Not so long ago, any protruding parts of the room be it beam structures, protruding structural parts, reference columns, niches or erkers treated its shortcomings. To date, such elements are created by designers for the embodiment of creative thought.

Using plasterboard structures, the room is filled with complex surfaces, which subsequently use a combined finish.

Combination options that hide the visible disadvantages of the room:

wallpapers having various shades of the same color;
cloths with a pattern combined with monophonic;
wallpapers with a pattern with opposite color background;
the combination of contrast patterns or various rapport;
use of uneven lines at the connection site.

The main difficulty in decorating protrusions and niches is to accurately cut the material and careful processing of the edge. For this, marking appliances are used. However, the painstaking of work with interest pays off by the uniqueness of self-created design and the perfection of the premises.

You can complement the created interior using competently organized lighting, additional accessories and properly selected furniture.

Secrets of combination

To obtain a guaranteed result, the following factors should be taken into account when combining two types of wallpaper:

acquire the wallpaper issued by one manufacturer;
it is worth considering not only color preferences, but also a combination with existing interior objects;
it is easiest to choose the wallpapers that are suitable in one collection and similar to the price category;
selecting the material with the patterns, orient, first of all, is worth the presence of a similar color or its shade;
wallpapers chosen as a basic basis should have a neutral tone;
the vertical option of pasting involves the use of a material with the same thickness;
for registration of the curb or panels, you need to choose the wallpaper with the maximum thickness parameters;
with a combination of coating made of cane, corks or bamboo with wallpaper of another species, it is worth using natural natural shades.

The process of designing a design combination of several types of wallpaper is associated with the implementation of a creative idea, due to which a unique result is achieved: the premises acquires its unique style and visual originality.

In this part, I will immediately tell about the technology of sticking vinyl combined wallpapers on a fliesline basis on a specific example. If someone has not read, then under the combined, I mean wallpaper from one series, but of different colors gamut. For a more detailed understanding of the process, I will give the name to different wallpaper rolls, as presented in the photo below:

The article material is quite voluminous, so if you are interested in specific moments, then use the navigation menu:

1. Choice and cooking glue

One of the most important moments of the process of wall pasting wallpaper is the choice of glue. Only high-quality glue will make the clutch of wallpaper with the surface of the wall most reliable and will avoid problems in the future. At the moment, the market presents a huge number of types of wallpaper differing in their composition. Almost for each type of wallpaper there is specialized glue.

I took advantage of Quelyd glue, designed for fiberglass glass and wallpapers. This glue is a white powder that needs to be divorced in water. If you decide to use this glue, the detailed instructions on the proportions are specified on the package. Also on the package, you can find information about pasting platform, which should be enough for adhesive composition.

To prepare glue, you will need a small plastic bucket, a volume of about 5 liters. In the bucket it is necessary to fill over the calculated amount of water (see information on the package), corresponding to the amount of glue that you are going to use. Next, it is necessary to start kneading the water with a tassel, creating a small whirlpool and at the same time carefully fall asleep glue. The whole process must be performed gradually without hurrying to avoid the formation of adhesive lumps. After cooking glue, it needs to be labeled for 15 minutes, then mix and proceed to work energetically.

Important: Do not dive immediately all the glue, prepare at least ¼ part, try. First, it will be possible to further correct the consistency, well, and secondly, you can simply not master the whole glue, and fresh glue work much more pleasant.

2. Where do you need to start glue the wallpaper?

This question is asked all who first faces sticking wallpaper. Previously, paper wallpapers were used everywhere in Soviet times, which were glued to the vest, it was necessary to start the walls of the walls from the window, in this case the joints between the wallpaper with natural light were the least noticeable.

Now the absolute majority of wallpapers are glued to jack. Therefore, choose the starting position of the pasting should be based on the following considerations:

Convenience. For example, it is more convenient for me to glue the wallpaper, moving from left to right, that is, I joking and equal to the left edge of the strip;
Wallpaper consumption. Before starting the pasting, it is necessary to estimate how the consumption can be reduced and rationally use wallpaper trimming;
Individual characteristics. In the example given in this article, I begin to stick from the corner of the room, as it is only so possible to provide a smooth and neat butt combined wallpaper;

3. Flizelin-based Wallpaper Wallpaper Technology

I would like to allocate general moments that will help understand the principle of wall pasting wallpaper on a flieslinic basis:

Wallpaper bands are cut depending on the height of the wall and stock to fit. For example, if the wallpaper is monotonous (without fit), then you need to consider only the height of the wall and the supply of trimming at the ceiling and floor (no more than 10 cm), and if the wallpaper has a pattern that requires fitting, respectively, we need to take into account the height of the wall, respectively And stock for fitting, and stock for trimming. The reserve on the fitting depends on the step of the vertical pattern;
If you are afraid that you can incorrectly calculate the strip length necessary for fitting, then cut off the wallpaper on the place. That is, you need to stick the first strip, then deploy a roll, dock the pattern on the roll with the already glued stripe, make a label and cut off the wallpaper strip
Wallpaper glue applied on the wall roller on the plot of a little more width of the wallpaper strip, the angles are more convenient to miss the brush;
Wallpaper bands are glued. Wallpaper band is beginning to glue from top to bottom, a bit of the ceiling at the ceiling, and at the same time align either the vertical fascinated line (if it is the first strip on the wall), or along the edge of the closed wallpaper strip;
Then the wallpaper strip is smoothed, it is necessary to drive out air bubbles and excess glue. Movements must be made from the center of the strip to its edges. For smoothing, a plastic spatula is used, a dry clean cloth or a luggage brush;
The glue spoke from the interface should be removed with a wet clean cloth;
The walls of wallpaper must be carefully stroke, for this, a special roller is used, but it can be limited to a plastic spatula;
Surplus of wallpaper from above and below are cut off with a stationery knife on a metal spatula.

4. How to dock the wallpaper of different colors in the corner of the room?

This is one of the first questions that occurs when the walls are covered with wallpaper wallpaper. We will try to disassemble it as detailed as possible.

The following method of docking wallpaper is called "trimming" or "climbing" wallpaper in the corner.

The essence of the method lies in the fact that wallpapers are glued with a small launch, then it moves along this flap, respectively, immediately through two layers of wallpaper, the surplus of the wallpaper is removed, and the joint is smoothed.

In my case, the wallpaper of different colors are joined, so the border between the canvases should pass strictly on the corner of the room, respectively, and the rubber is done on the corner, but if it does not require strict separation of wallpaper in the corner, then it breaks better to do on one of the walls, retreating a small distance from the corner (5-15 mm), so the junction will be greater.

Example of docking wallpaper in the corner of the room:

Step 1. We need to spend two vertical lines on adjacent walls, it is done by a simple pencil. Since the width of the roll (in my case) is 53 cm, and the flystone is needed, about 5 cm, then from the angle of the wall, it is necessary to retreat about 48 cm, in the same side and spend the vertical lines using a building level or a plumb.

Step 2.. Then we need to apply glue within the lines data. We take a roller and a bath with glue and carefully apply glue on the wall, hard-to-reach places (angles) with a tassel.

Step 3.. We take the strip of patterned wallpaper and gently glue it from top to bottom, smoothing the irregularities with a special plastic spatula, and you can also use a clean rag or a luggage brush.

In the photo below, we see that the wallpapers are pounded with an adjacent wall in the limits of 5 cm:

Step 4.. Excess the wallpapers that enter the floor or the ceiling cut through the metal spatula.

Step 6.. Thoroughly smoothed wallpaper in the corner:

1. It is very important that the knife is sharp, then the junction will be neat and smooth.

2. It is much more convenient to do the team together: one holds a spatula, the second - cuts.

Step 8.. Remove cut wallpaper strips:

In my case, the "patched" wallpaper was under "green", so I am a little flexing the wallpaper (photo from above) and pull out the sliced \u200b\u200bstrip of "patterned" wallpaper:

Step 9.. The wall under bent wallpaper must be missed with glue using a brush, and then tightly press wallpaper to the wall:

Step 10.. We smooth out the wallpaper in the place of the joint with a plastic spatula. Bog Wallpapers in the corner Ready:

If one-photon or wallpapers are used, then the joint is not more correct to do in the very corner of the room, but on the wall, retreating 10-20 mm from the corner, thus make it easier to make a neat roset and seam will be smooth

5. Walking wallpaper around switches and sockets

If the outlet and switch are not yet installed, then items 1 and 2 can be skipped:

De-in a switch or a socket, and then carefully remove them from the pickle and disconnect the wire;
Hide the wire into the opposition so that it does not interfere with the pasting, after having undermined it;
Stick the wallpaper web on top of the hole for switch or outlet;
Take the stationery knife and make a circular rubbing along the contour of the hole;
Carefully smooth the wallpaper with a plastic spatula next to the hole.

6. Casting room with combined wallpaper. Main steps.

After the junction device in the corner, you yourself choose in what direction to move. I began to glue the wall "green" wallpaper. Almost completely, taking this wall, I left the place only for the extreme strip, as it should be docked through the rubber with "white" wallpaper.

Then I returned to the corner number 1 and began to move to the window, sailing the wall "patterned" by wallpaper:

Then in the corner number 2, I docked the "patterned" wallpaper with "white" for the same technology, which was presented above, that is, through the rubber. The docking process is presented in the photo:

I left the wall with the window at last, as it was necessary to replace the radiator and paint the heating. I moved to a long wall with "white" wallpaper (pos. №17 according to the scheme), again spent on the level of the vertical line and began to shower the wall from left to right.

In the corner number 4, I performed the "White" wallpaper with "green" (photo below):

Last but mentioned above, I was engaged in a wall with a window.

The main task with pasting this wall was to dock the wallpaper through the rubber over and under the window. The meaning is that due to the window work, the height of the joint in this case will be minimal, as well as the joint, located under the window can be hidden under the heating radiator. Therefore, in the case of the pasting scheme, it can be seen that the movement in case of the wallpaper is carried out from the corners to the center of the wall. Strips 33 and 35, as well as 30 and 32 are joined through the rubber. Visually the process of pasting is presented in the photo below:

Let's talk about how beautiful to bleach the wallpaper in different residential premises. Let's start with how modern can be saved such a room as a hall. It is this room that appears to be a guest, forms them the impression of them about the whole house or an apartment. The interior planning must be performed leisurely, pay attention to different small details.

How modern and beautifully shove the wallpaper? This question worries all owners of urban and country housing.

Attention! In order to stick the wallpaper in your hall, you need to choose the right glue.

Interior options

For those who decided to beautifully wake the room with finishing materials, we note that you need to find them a specific type to begin.

Paper web, currently offered by manufacturers, are divided into several species. The photo contains paper wallpapers that can be saved a small living room.

Tip! The living room is better glued two-layer canvas.

Such materials have excellent mechanical characteristics, it is easy to work with them, you can buy them at affordable prices.

The photo shows an interior example demonstrating how to beautifully stick wallpaper in the living room.

Washing materials with a variety of drawings are better pasted on the walls of the kitchen or hallway. In the hall, such wallpapers are inappropriate, they will not create the desired atmosphere in this room.

Fliseline canvas can be glued in those rooms where the walls have significant defects. The dense structure of such materials will ideally cope with the task, will help get rid of protrusions and depressions on the surface.

Original solutions

How to beautifully wipe the room with wallpaper to enjoy the result? Currently, there is a huge number of diverse options for plating wallpapers, involving the use of a combination of wallpaper of different textures, colors. On the photo an example of how you can save one room with several wallpaper.

Among the fashionable examples of how beautifully glue wallpaper, we highlight the use of two types of wallpaper having one color, but various shades. Thanks to a similar combination of wallpaper, you can make a beautiful wall in the room.

Tip! An interesting solution is a combination of gray, blue, beige colors. Such shades can be used to design a working office.

Single wallpapers can be combined with wallpaper that have an ornament or drawing. This option will enter the interior of the dynamics. In addition, thanks to this unusual reception, the premises can be held, making an emphasis when sticking to a certain area.

You can stick the canvas (sample in the photo) with a pattern of different types. For example, a combination of materials with ornament, with canvas having vertical or horizontal stripes, gives an excellent effect. Beautifully looks at wallpaper with geometric shapes, supplemented with wooded topics.

Thinking on how to stick wallpaper beautifully, look at the contrasting options. For example, you can shove the walls of the room with contrasting materials, making the interior fashionable and unusual.

Young owners of housing prefer glue on one wall with bright accents, it is especially true in Studio apartments. The photo shows the option of how to salary walls in a small residential room.

Answering the question of how beautiful to bleach the wallpaper (see the photo below), we turn to the advice of professional designers offered in the video fragment

In addition to the combination when there are several types of wallpaper, there are plenty of other options for glue wallpaper.

Tip! The original view has (in the photo) horizontal stripes. It is the technology of wicked walls with horizontal stripes is considered a fashion trend in interior art.

The wall is divided into two parts. Each of the wallpaper of various colors and designs having one color. Relevant with such stiffering and materials with similar wallpaper structure. To eliminate joints, pick up special decorative curbs.

Attention! Bottom wallpaper should not have one meter.

You can select the canvas of contrasting color, use monochrome colors. The choice depends on the taste preferences of the owner of this residential premises.

Features of choice

If you decide to find wallpapers with a drawing, they must be combined with design. On the joints between such decorative materials you need to stick molding. It will give the effect of the premises of the decorative panel, will enter the sophistication and elegance in the room.

With the help of such an unusual sticking, you can create original zoning in the living room, the desktop. For example, select the fireplace, television location zone.

Recently, the interior specialists recently consider the allocation of a certain wall in the interior. The photo presents a sample, how to glue finishing materials so as to mimic an unusual panel on the surface. Patchwork technique involves the use of several wallpaper immediately, which are combined with each other in color, texture.

The technology of such decoration consists in preliminary cutting of sections of segments of the desired size and shape, sticking their jack. If you wish, you can carry a sticking chaotic, especially when decorating the wall in a modern interior style. This option of sticking can be used in the teenager's room, as they are due to psychological characteristics prone to maximalism, including in the interior.

If you have chosen a vertical sticking of hotels, try to pick up the options of one type that have the same thickness. In this case, you can avoid ugly junctions between individual canvases.

Tip! Before bouts to pasting with surface materials, first try to attach materials to each other. You can evaluate their combination to avoid disappointment after the completion of the repair work.

Special caution should be taken when combining decorative materials with a bulk pattern. It must be remembered that similar canvas can affect the visual perception of the parameters of the room.

For vertical salary, one-type canvases, having an equal thickness suitable. If there are any niches inside the room, they can also be isolated by decorative materials. Professionals advise for such purposes to use the trellis with a slight pattern.

When choosing paper materials, do not forget that they have excellent air permeability, but very quickly lose their original aesthetic appearance. Such materials are better to make children's premises, but they are not suitable for shocking walls in the bathroom, corridor, kitchen.

Vinyl materials are ideal for use in the interior of patchwork equipment. Their dense texture allows numerous experiments with the creation of decorative panels, the implementation of zoning in the room.

Textile canvases are suitable for lovers of a luxurious interior. They require additional care, besides have a fairly high cost.

Conclusion

When sticking the walls by any kind of finishing materials, it is important to take seriously not only to the selection of special glue, but also to choose their colors, textures.

Cold shades positively affect the mental state of the person. For hot-tempered and impulsive person, psychologists advise to choose green or blue saturated tones to decorate the walls. Romantic nature is desirable to pick up warm shades.