Transformable table project nm 56.12 00 assembly. How to properly assemble a transforming table from “Lots of Furniture”? Assembling transformer table legs

Transformable dining table milky for guests

For a small apartment, furniture such as a transforming table is irreplaceable. It can be easily transformed from a compact coffee table into a full-fledged dining table for several people.

The coffee table easily turns into a full-fledged table for entertaining guests

Read our instructions and make sure that assembling the transforming table is very simple.

Lunch and magazine options transformable table with dimensions

Necessary tools for furniture assembly

To successfully assemble the transformer you will need:

Phillips screwdriver or screwdriver with attachments;
furniture hammer;
fasteners and accessories included in the delivery kit.

Detailing the table frame and its legs

Box with fittings and fastenings

Despite the many offers on the furniture market, for most manufacturers the process consists of the following steps:

Housing assembly

Assembling the corner legs of our table

All legs for the transforming table are assembled

Corner legs of two halves are connected with screws or eccentrics. In the same way, a body is assembled from long and short drawers.

Detailed case assembly process

Screw the legs to the body according to the instructions

IMPORTANT! Special holes are made on the legs and drawers for simultaneous installation of the lift and screed of the entire structure. Check after assembly if they match.

Assembled base with legs

Nail the plastic foot pads to the bottom ends of the legs. At the upper ends of the drawers, install shock absorbers to soften the impact of the tabletop when folding it.

We nail heel pads to the legs

Installation of the lifting mechanism

Installation diagram of the lifting mechanism

Drive the lift to working position. To do this:

Fixed springs for operation of the transforming table mechanism

The mechanism is in a calm, unexpanded state

IMPORTANT! The legs of the holders designed for a folding tabletop are higher than those made for the underframe.

Mechanism for bringing the table to the upper position

Installation of countertops and underframes

Mounting a smaller part of the countertop

Installing the base for a large part of the tabletop

Screw the bottom flap of the book-table top and the base to the holder platforms. WITH outside Under the table, install shock absorbers that absorb shock when unfolding the tabletop. Using an outside-in motion, fold the lift legs into the box. It will be covered by the bottom of the tabletop.

Fix the upper movable part of the tabletop

Install the second half on top so that the end holes under hidden hinges were on one side, and their center-to-center distance was minimal (about 14 mm). Carefully insert the hinges and secure with screws.

Hidden hinges to secure the table when assembled

The table you assemble will last a long time. Do not forget to tighten its fastening joints once a year, clean the surface with a dry soft cloth or a special furniture polish.

Coffee version or folded table

The process of transforming a table from a coffee table to a table for receiving guests

Dining option or unfolded table

Video: Transformable table. Assembly

In the Mnogo Furniture store, the transforming table is usually sold assembled. In order not to waste cash for the work of a master, you can assemble it yourself. As expected, assembly instructions the table is coming with each model, but sometimes understand it without outside help it can be difficult. Therefore, it is better to use photos and videos that describe each stage of the work in detail.

Table assembled Disassembled

Table assembly diagram

The transforming table from “Much Furniture” should be assembled in stages, starting with the legs. The drawings show in detail how the parts are twisted. It is worth noting that assembly must be carried out according to technology, otherwise the furniture will not be able to serve you for the required period. In general, the tables are assembled according to the following plan:

Legs.
Table top lifting mechanism.
Table frame.
Additional shelves and drawers (if available).

Knowing how to assemble a transforming table from “A Lot of Furniture” using a video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a ruler with a pencil to make marks. It may not be very convenient to do this alone; the help of a friend will not be superfluous, at least to hold some elements of the table.

Assembly Features

Be sure to tighten all bolts on the mechanisms securely. Since the table will be unfolding all the time, you need to take care of its strength in advance. Assembling a transformable table from Much Furniture will not take much time if you follow the instructions.

Carefully study the assembly diagram and do everything as indicated in it. Even small retreats will change the quality of operation of the table.

Assembling the table legs Assembled base Screwing the legs to the body Fixed spring in the table
The transformation mechanism is inoperative. We mount the smaller part of the tabletop. We fix the upper movable part. Hiding the hinge for fixation.

Remember that there are various types original tables transformers. When purchasing a specific model and assembling it using a video, make sure that it shows exactly what you need. In general, most of them are similar, but even some decoration elements can ruin it appearance. The most popular models today are:

Dolphin;
Caesar;
Levmar;
Demi.

When assembling a transformer table, the question often arises: how do the mechanisms withstand such heavy tabletops? There is nothing unusual in this, because their strength is in no way inferior to sofa options. They can withstand a lot of weight, and their service life, established by the manufacturer, will surprise any buyer. Steel fasteners do not come apart even after for many years daily use, the main thing is to secure them firmly.

Self-assembly requires sufficient physical strength. A weak woman is unlikely to be able to tighten bolts and nuts well enough, so men should do this job. Tables from Much Furniture have been and remain one of the highest quality and most reliable, and that is why they are so popular. Having assembled the model you like, you will understand that you were not mistaken with your choice.

You can’t place a lot of furniture in a small apartment. Owners should think about interior items that can simultaneously perform several functions. Two tables - a coffee table and a dining table - can easily be replaced by one transforming table. Buying this product will hit your pocket, so it’s better to make it yourself.

What can you do at a transforming table?

It is convenient to dine with a large group at the increased surface of the transformable table

The biggest benefit of tables that take on multiple shapes is their versatility. A seemingly standard table can be turned into a completely different one, which can have any purpose:

Table for a formal reception of guests;
A place where you can prepare dishes and cut vegetables and fruits;
The surface on which they eat breakfast, lunch and dinner;
A table for work (if you have to read or write in the kitchen).

To these functions you can add the use of a transforming table as a cabinet or coffee table, but these purposes are more modern.

The most popular and useful option is combining a coffee table with a dining table. While there are no changes in the everyday life of the owners of this piece of furniture, there may be a vase of flowers and a framed photograph on it, or there may be magazines lying on it. But as soon as guests arrive, the table area increases so that the owners can occupy it with cutlery and treats.

How does a coffee table transform into a dining table?

The principle of turning an ordinary table into a dining table is based on changing its size. This is facilitated by varying the shape and height of the tabletop above the floor. The table surface becomes larger and higher in one or more actions:

Raising the legs of a table in the same way as an ironing board;
Separating folded table elements (like pages of a book) and then pulling them out;
Combination of the two above methods.

Having decided to create a transforming table yourself, you must first decide on the type of transformation. When choosing, you need to deviate from individual preferences. And to know for sure which way to transform a table from one to another is better, it is recommended to study the information on the forums.

This is how the folding mechanism of the transforming table works

If you want to make a transforming table so that there is room in the apartment for romantic dinner for two, then it is wiser to focus on transformation method No. 1. And when from time to time there is a need to host friends (up to 10 people), it is much more correct to make a table, the area of which is increased using method No. 2 or 3.

Most often, men choose to make a table themselves, parts of the table top are removed to the sides, freeing up space for built-in elements. These additional components of the table are located inside it or stored separately (like hair dryer attachments).

The transformation of a coffee table into a dining table is carried out thanks to the installation of special mechanisms. They can be sliding surfaces, gas lift loops that lift and hold the “lids” of the table, and special fittings.

Materials and tools

Typically, a multifunctional table is made from wood (using solid beams), chipboard, laminated wood panels and glass. But not only the usual lumber, but also unnecessary things like a suitcase, can serve as raw materials for the manufacture of such an interior item. window frame or pallets.

Chic and unusual in appearance, transformable tables are made exclusively from ordinary laminated fiberboard panels or medium-density boards.

How many materials will be needed can be calculated immediately. To assemble a standard square transforming table, use:

4 bars that will become table legs;
Chipboard slab 2.2 cm thick for the tabletop ( Alternative option- sheet of plywood);
Chipboard slabs 1.6 cm thick for the body;
4 corner fasteners connecting the table surface with the legs;
Pipes with a diameter of 2 cm;
Transformation mechanism;
Bolts, nuts, hinges, washers and self-tapping screws.

To connect and process the parts you will need putty and wood glue. You need to choose only those that are suitable for working with wood. In order to increase the service life and improve the aesthetic appearance of the product, it is recommended to arm yourself with impregnation and varnish. Tools will help you assemble all the prepared parts to make a transforming table: nails, a hammer and a trowel.

Design and assembly of elements: step-by-step instructions

Design coffee-dining table possible in computer program PRO100 or Sketch Up. They are easy to understand, so even a beginner can quickly figure them out. True, drawing up a project and drawings of the desired table is a labor-intensive process, so you will have to wait 2 hours for the result.

The figure shows standard sizes transformable table parts

Having received the drawings, we begin cutting materials. You can cut it in the same program, or rather in the application to it. After printing out the cutting map, it's time to make the cuts. It is advisable to assemble the finished parts from laminated fiberboards together without fastening them yet, in order to be sure that the dimensions are calculated correctly.

Now it's time to assemble the table frame using zip ties for grip. wooden elements(confirmants). They are immersed in wood using a screwdriver.

To make clear markings on parts made of dark laminated chipboard, you can use regular stickers. A pencil is not suitable for this purpose - the lines drawn with it are barely noticeable, since the graphite glares and is reflected. When using stickers, there is no glue left on the surface at all.

It's time to equip the structure with legs. They must be thick, because all the elements of the transforming table will put pressure on them. Together, their weight can be about 50 kg. It’s better to play it safe and connect the legs to each other using zip ties.

Then you can screw the legs to the table. But first you need to accurately mark the fasteners and drill holes in them. The legs are usually installed on metal bushings. The created holes will not be visible, since the upper part of the legs is hidden in the frame.

Equipped with transformation mechanism and tabletop

Having finished attaching the legs, you can start installing the mechanism that is important for the transforming table. First, you need to equip the product with springs that separate the folded parts of the table, and then insert a special device into the frame.

This device for changing the shape of the table weighs about 10 kg, so it is better to fix it through the structure. There is nothing wrong with this, since it is correct. In addition, all the gaps and fastenings made will not be visible from under the overhead legs.

You need to apply markings for attaching the mechanism, using the same stickers. And then you can drill holes into which you will later need to insert bolts. After creating through holes, you need to arm yourself with phosner and prepare a place for immersing the bolt heads.

Now it's time to secure the mechanism with bolts. You will need a lot of these parts, since they reliably connect the walls of the table so that they become self-supporting.

The coffee table transforms into a dining table when it becomes taller and wider thanks to a special mechanism under the tabletop

The last task is installing the countertop. First of all, holes are made for fastening the elements, and then two parts of the tabletop are fixed in place - first the small one, and then the large one.

The tabletop must be assembled carefully, since in case of an error it will unfold unevenly. And hinges are responsible for separating the parts of the tabletop, which should not only be functional, but also strong, so as not to come out of special slots.

After the work has been done, you need to try to unfold the transforming table. If you have to make efforts to increase the table area, you will need to adjust the transformation mechanism. If the table lays out perfectly, then you can varnish it.

Using this manufacturing method, you will be able to get a durable and original transforming coffee-dining table. This product will be useful to every housewife and will last for many years.

In many apartments, the living space is not very large, so residents have to select furniture so that the arrangement is cozy, but at the same time compact. In such cases, folding furniture comes to the rescue, helping to save space without depriving residents of necessary household items. A transforming table is a representative of such furniture.

Transformable tables are used in kitchens, living rooms, and bedrooms. This item is made completely differently, depending on what functions will be assigned to it. Such tables are also called folding tables. Classify tables
according to their functions:

coffee-dining;
coffee tables (like workplace);
tables as storage systems.

The first option is the most relevant. As a rule, such tables are bought by a young family shortly after the wedding and the number of guests gathering at this table only grows over the years, but the area of the apartment does not. This coffee-dining option serves as a stand on normal days and doesn’t take up much space, but on weekends or holidays it turns into a real dining table. It doesn't take too much effort to seat 5-7 people. In addition, such a table is the most ergonomic for a studio apartment, where all living space is combined.

To create a coffee table as a workplace, others use
types of countertops. For these purposes, it is not at all necessary that it be completely disassembled or change its shape. This table option can quickly and easily be converted into a desk and adjusted to the required height. As an addition, the table is equipped with drawers for more convenient storage. stationery. The table can be given several positions due to the type of fasteners used in each specific case. Where continuously adjustable mechanisms are used, operation is much simpler. With such an item, you can create a workplace even in an apartment where there is a lot of furniture and there is no room for a large desktop.

Tables that are used as a storage system are quite simple design. They consist of drawers and a table top. Such a table unfolds by spinning it around its axis.

Types of tables

Such furniture is usually divided into subtypes, which depend on the mechanism for its folding:

Assembly principle

Quite a lot of people, after seeing the cost of such tables in a store, decide to assemble such an item with their own hands. There's a folding one in the store coffee table will cost about 12-15 thousand rubles. If you take on the assembly yourself, you can invest 6-8 thousand.

Collect a magazine folding table you can do it in a few steps:

Select a folding mechanism.
Create a project.
Decide on the material from which the table will be made and cut out parts from it according to the dimensions specified in the project.
Rough assembly of parts.
Frame installation.
Installation of supporting parts.
Tabletop installation.

To get a high-quality result, it is better to create a project in a special
computer program. It will help not only create a model of the future piece of furniture, but also correctly calculate the amount of material required.

The components can be purchased at the same store where you will purchase chipboard panels (including cutting them). Finished parts are initially connected using bolts, and only after that the transformation mechanisms are installed. Before drilling holes for the bolts, you need to make markings with a pencil.

If you choose the right material and mechanism for layout, the table will not differ from the store version. This furniture is perfect for small apartment, in which there is a child and a lot of furniture. When assembled, the table will not take up much space, which will save space for children’s games, and when you need to seat guests, it will be the best assistant.

You can also watch additional assembly techniques on the Internet in training videos.

If we talk about various modifications of tables, the transformer has a rather rich history. More in Soviet times the book-table was well known. It is still successfully produced by many furniture factories in the country. And according to user reviews, in many cases, it is an indispensable piece of furniture. Let's figure out what the subcategory of transformers actually is.

Why, as mentioned above, does the book belong to the group of transformers, and what other tables belong to this group? Any type of table that can change its geometry with a slight movement of the hand can be classified as a transformer. For a better understanding, it is worth noting that a standard living table from the same Soviet times, which also extends with the addition of part of the tabletop, cannot be called a transformer, since it does not have an opening mechanism.

Most often, such models are used in small apartments or premises whose area is limited. This table can be folded up to minimum sizes and not take up extra space, but, if necessary, expand to the required size.

Where are such products most often used? According to reviews from users of transformers, most often these are living rooms, a little less often, dining rooms. A very popular transformer today is the magazine version.

For the manufacture of this group it is most often used furniture chipboard. Transparent materials are used much less frequently, since it is necessary to hide the deployment mechanism of the transformer.

Important to remember! That the type of furniture that is subject to constant mechanical stress requires more quality materials, otherwise, over time, the connections of the nodes will become loose and the table will fail.

To assemble this type of furniture, standard tools provided by the manufacturer are required. If you make the furniture yourself, then you will additionally need a screwdriver with various attachments, a confirmation drill, a hammer, screwdrivers and pliers.

How to properly assemble the body of a transforming table

Assembling the table begins with a thorough study of the manufacturer’s drawings or your own if it is being manufactured with my own hands. First of all, you need to understand the order of assembly of the units. The body is assembled first.

All parts are fastened using confirmatory connections. It is important to ensure that right angles are maintained when assembling parts. It is also important to remember such details as heel pads, which prevent your feet from scratching the floor, and shock absorbers, which reduce the tabletop’s run-out against the edge of the cabinet when unfolding furniture.

Rules for installing the lifting mechanism

The lifting mechanism is installed before the tabletop is attached to a space specially prepared for it. Moreover, when assembling a factory table, the holes for the mechanism are made in advance. At self-production you will have to drill in place. The springs in such a mechanism are attached after the rest of the mechanism has already been secured.

Tabletop installation

Installing a tabletop, on the one hand, is the simplest operation when assembling a table. But, on the other hand, if it is installed incorrectly, the geometry of the transformer will be disrupted and cracks will appear that will spoil its appearance.

How to install a base

After assembling the tabletop, you can proceed to assembling the underframe. As the name suggests, these units are hidden under the tabletop when the table is assembled. Therefore, it will be convenient to assemble the underframe when the product is unfolded. In this case, it is necessary to assemble all its components separately and then attach them to the body.

After the assembly is completed, it is important to conduct a final check of its functionality, so as not to be embarrassed later when displaying the furniture. All mechanisms should work without much stress and quite gently.

When assembling, it is important to remember safety precautions. Especially when working with sharp drills, as well as when checking the opening and closing mechanism. Since hands can easily get into the space of the mechanism itself.

If you purchased a transformer, carefully study the instructions for assembling it. There is nothing complicated about it. And you will definitely end up with an attractive piece of furniture.