Coffee table transformer with your own hands. Magnifier-dining table-transformer: what is different from others and how the transformer table is created to be created how to assemble the mechanism
In many apartments, the living area is not too big, so residents have to select furniture with the calculation so that the alignment is cozy, but at the same time compact. In such cases, folding furniture comes to the rescue, which helps to save place, and at the same time do not deprive the tenants of the necessary items of considerable. The transformer table is a representative of such furniture.
Transformer tables are used in kitchens, living rooms, bedrooms. This item is done completely differently, depending on which functions on it will be assigned. Such tables are also called folding. Classify tables 
according to their functions:
- journal-dining;
- coffee tables (as a workplace);
- tables as storage systems.
The first option is the most relevant. As a rule, such tables are bought by a young family shortly after the wedding and the number of guests going to this table over the years only grows, but there is no area of \u200b\u200bthe apartment. Such a journal-dining option for ordinary days serves as a stand and places does not occupy a lot, and on weekends or on holidays turns into a real dining table. There is no effort too much to sear 5-7 people. In addition, such a table is the most ergonomic for the studio apartment, where all residential space is united.
To create a coffee table as a workplace use other 
types-tops. For these purposes, it is not at all necessary that it completely disassembled or changed its form. This version of the table can be quickly and easily turned into the desk and adjust the required height. As a supplement, the table is equipped with boxes for more convenient storage of stationery. Table You can give several positions due to the type of fasteners used in each case. Where the smooth adjustment mechanisms are used, exploitation is much easier. With such a subject, you can create a workplace even in the apartment where there are a lot of furniture and for the big desktop there is no place.
Tables that are used as a storage system are a fairly simple design. They consist of boxes and countertops. Such a table unfolds by spinning it around its axis.
Types of tables
This furniture is customary to subdivide on subtypes, which depend on the mechanism of its decay:
Principle assembly
Many people are sufficient after they saw the cost of such tables in the store, decide to collect such a subject personally. In the store such a folding coffee table will cost about 12-15 thousand rubles. If you take up the assembly itself, you can invest in 6-8 thousand.
You can collect a coffee folding table in several steps:
- Select folding mechanism.
- Create a project.
- Decide on the material from which the table will be made and cut the part from it, according to the size specified in the project.
- Chernovaya assembly of details.
- Mounting frame.
- Setting support parts.
- Installation of table top.
To get a quality result, the project is better to create in a special 
computer program. It will help not only create a layout of the future interior object, but also competently considers the amount of material required.
The components can be purchased in the same store, where you will acquire the chipboard panels (including them cut). Finished parts are initially connected using bolts, and after that, transformation mechanisms are mounted. Before drilling holes for the bolts, it is necessary to make the markup of the pencil.
If you correctly select the material and the layout mechanism, the table will not differ from the store. Such furniture is perfect for a small apartment in which there is a child and a lot of furniture. In the collected form, the table will not occupy a lot of space, which will save a place for children's games, and in the case when you need to put guests, it will be the best assistant.
Also, assembly techniques can be viewed additionally on the Internet in the training video.
Download video and cut MP3 - we just have it!
Our site is an excellent tool for entertainment and relaxation! You can always view and download online video, video jokes, video hidden cameras, feature films, documentaries, amateur and home video, music videos, video about football, sports, accidents and disasters, humor, music, cartoons, anime, serials And many other video are completely free and without registration. Convert this video to mp3 and other formats: MP3, AAC, M4A, OGG, WMA, MP4, 3GP, AVI, FLV, MPG and WMV. Online radio is a radio station to choose from country, styles and quality. Online jokes are popular jokes to choose from styles. Cut MP3 to ringtones online. Video Converter in MP3 and other formats. Online television is popular TV channels to choose from. The broadcasting of the TV channels is made absolutely free in real time - the ether online.
How to make a coffee table transformer with your own hands? If the area of \u200b\u200bthe apartment is small and when buying new furniture arise difficulties with a choice of places, then objects that have multifunctional characteristics are indispensable in such a situation. Transformers are now very popular.
There are such models on sale, but they are very expensive. Therefore, you can make a coffee table with your own hands. This piece of furniture in folded form is a coffee table, and in the deployment turns into a large dining table.
Transformer Table Production Technology
Materials and tools:
Scheme of the transformer table.
- chipboard sheets;
- transformation mechanism;
- pipes 20x20 mm;
- 8x60 mm bolts;
- metal corner;
- building level;
- nuts;
- washers;
- self-tapping screw;
- loops.
How to make the transformer magazine table? First of all, it is necessary to purchase a mechanism for transformation of the product in the store. Now there are various options for such devices of different manufacturers. The choice is large enough.
The device has a special gas-elevator or springs in its design, with which the model transformation occurs. These elements provide a sufficiently soft and smooth course of the product.
Simplest is a spring-based device. This option is more durable and reliable. In the finished product, it will look aesthetically, since the spring is inside the case of the mechanism and it is not visible when the transformer table will be collected into a magazine or dinner.
Development of project design
You can make the project of the future product in a specialized computer program. This work will be able to fulfill any person familiar with the computer. You can perform an instance layout in a three-dimensional image.
Possible size of the transformer table.
Knowing the size of the transformation mechanism, select the dimensions of the future model in both options. When the project is ready, you need to purchase the necessary materials.
To perform the model you will need chipboard sheets. Cut sheets of necessary sizes can be custom-made in a specialized workshop. When the sheets of the corresponding sizes are ready, they must be placed on a flat surface, can be placed on the floor.
The chipboard thickness for the manufacture of the design is better to choose 22 mm. From such a sheet will be made of a dining instance countertop. It is for such loads that the transformation mechanism is calculated.
The body of the model can be made of 16 mm thick chipboard. The workshop is carried out by the processing of chipboard sheets.
Then you need to purchase tools for assembling the model.
Collection of table design
First execute the frame of the frame. The framework is mounted on the confirm. To do this, use a durable drill.
Then mark on the sheets of the chipboard using the marker.
After that, the frame of the transformation is installed in the frame. Previously, it is necessary to install the springs, with which the model will be folded and its soft movement will be provided.
The transformation mechanism must be installed through the method. The weight of the device is quite large, so the design should be durable.
After that, the device is fixed. In order for the fastenings of the product were not visible, the installation of overhead legs, which will hide all additional parts.
After that, make marks of those places where fasteners will be installed.
Then in the required places drill holes for installing bolts. After that, a special place is prepared with a solid drill, where bolts will be hidden.
The device is fixed to the model frame using bolted connections. With the help of bolts, the wall of the product is connected to each other.
After installing the device, it is processed to fix the legs of the product. The legs must withstand the weight of the entire design, which is 40-50 kg. In addition, they must withstand the weight of the items that will be on the table. Therefore, the legs fasten with each other using screeds.
After that, the legs are screwed to the design. Previously, it is necessary to make the corresponding marks to set the legs. The horizontal structure and compliance with direct angles should be monitored using a construction level.
Drill holes for installing legs. They need to be installed on the sleeves from the metal.
Then proceed to the installation of the table top. It needs to be assembled very carefully, since the mechanism of the table-top transformation should be reliable and perform a flat folding countertop.
Then perform marks for holes. Elements of fasteners will be installed in these holes.
After that, the installation is performed. Adjust the folding mechanism of tabletops. Drill holes for installing countertops.
With the help of screws attach a small worktop to the design. Then the holes for fasteners are performed in a similar way and a large tabletop is installed in its place.
Table transformer journal dining ready.
This design should be very strong to withstand all loads.
After making the model, it is necessary to check how the transformation mechanism works. If there are any errors when working the mechanism, you can adjust it.
The coffee table transformer made by such technology will provide a solid and reliable design with a long service life.
It has long been dreamed of a transformer table, in our Khrushchev who cannot be different. All rooms are eternally forced furniture and all sorts of things. I wanted to somehow cut the number of furniture, but the functionality is not losing. I found the answer to this question for a long time in transformer furniture, but it was expensive, but did not decrease myself.
There was a period when I gathered all the materials and had already planned to make the table, but faced with the first problem - to make or buy a transformation mechanism - immediately refused the venture. And he returned to the thoughts about the assembly of the table of the transformer with their own hands suddenly - the living room had repairs, it was assumed that an aquarium on 350 liters will move into the room after repair, and it's clear the case of speech about finding the full-fledged table in this room could no longer be. A long-standing dream of the Table Transformer surfaced in the head and all twisted.
Master class description
Selection of the conversion mechanism of the table.
Posted up the suitable conversion mechanism of the table. I chose first how the table will be laid out, I really liked the mechanism of the acrobat, but it is not supplied to Russia. Well, the only alternative available on the market was the mechanism of the following principle:
This mechanism is produced in both Russia, there are analogues from Europe and China. Supported the Russian manufacturer! The mechanism happens with springs or with a gas elevator that is needed to assist in folding / folding the table - for a softer stroke. Without a doubt, chose an option with a spring, because The easier the design, the more reliable. In addition, the spring is hidden into the body of the mechanism and is not visible when placing the table, unlike the gas-elevator that is too noticeable.
Transformer table design.
Compiled in the program Pro100 layout of the future table. This program used the first time in my life, I figured it out for 1 evening. The layout did somewhere in 2 pm. For the standard I took a picture from the Internet of a similar table, the size calculated himself. It turned out nothing complicated. Many recommendations were in the dogboard with the purchase of the mechanism expelled, focused on them when calculating the size.
Crucified and chipboard.
I ordered the cutting LDSP. In fact, the PRO100 program has an application that makes the cutting card, but because It was too lazy to look for and dealt - then I was manually cutting the cutting card and pretty quickly.
On my map there are still third-party elements, because I ordered another end with a table. These extra elements are marked on a map of H. Color LDSP chose Wenge, the thickness on the recommendation of the manufacturer of the transformation mechanism 22mm. At least this thickness must be a tabletop. The mechanism is calculated for such a load, the table housing itself can be made of 16 LDSP. But ordering 2 sheets of different thickness with a lot of trimming, not everyone)) the adhesion ordered immediately with the saw, the table top of the PVC edge 2mm, the rest of the melamine standard edge.
Primary fitting part.
Brought painted and stamped LDSP. I bought all the necessary hardware for the assembly. I tried to fold the items to exhale and make sure that the size was not wrong. Everything happened, the size did not lose.
Assembling table frame.
The framework of the table is collected on the confirmates using a special drill. Marking on Dark LDSP We produce with stickers. This thought came suddenly, after she tried on a dark chipboard a pencil put markup: nothing can be seen and the pencil is reflected and glanced. The sticker decided the situation - the markup turns out exactly and traces from the glue on the LDSP does not remain. In addition, the solution is fond of cheap.
Well, the scan of the table frame on the confirmates:
Font drive through the mechanism through the way, because The weight of the mechanism is impressive - 8kg. everyone. You should not be afraid. We all calculated and the feet of the overhead will hide all technical openings and fasteners. We make the markup under the fastening of the mechanism in the same way
Drill through holes under the bolts and then the phosner drill is preparing a place under the head of the bolts to drown them.
Well, the main bolts mechanism. It is not necessary to scare the number of bolts, they are all necessary, they fasten the walls of the table even more and make them self-supporting.
Collection of transformer table legs.
Collect the feet of the table. The legs must be very durable to withstand the weight of the table (and this is about 45 kg) and the weight of the dishes on it. Therefore, the legs were also decided to bore the screeds together.
We screw the legs to the table. To do this, you need to very accurately make the markup of the fasteners of the legs. I am not wise drilled around the place. We will set it out for such metallic bushings
For them, in the legs drill holes on the outlined.
Here, all the legs were screwed in such a position. The legs hide all the technical openings in the table frame.
Assembling table tops.
The table top needs to be assembled with a special accuracy, because the folding hinge must be durable and ensure flat folding / folding countertops. When I bought, doubted the hinge and not in vain. In principle, work is working hard in the jacks hard, and the screws that do not provide are coping. Therefore, I advise you to look after other hinges for the table top. Hole markup in table top:
Collected table tops
Dining table transforming bribes for guests
For a small-scale apartment, such furniture as the transformer table is indispensable. It is easy to turn from a compact magazine bedside table into a full dining table for several people.
The coffee table is easy to turn into a full-fledged table for receiving guests
Read our instructions and make sure that the assembly of the transformer table is very simple.
Dining and Coffee Table Transformer Variants
What is necessary
Required furniture assembly tools
To successfully assemble the transformer, you will need:
- cross screwdriver or screwdriver with nozzles;
- hammer for furniture;
- fasteners and fixtures that are running in the delivery.
Detailing frame frame and his legs
Box with accessories and fasteners
Despite the many proposals in the furniture market in most manufacturers, the process consists of the following steps:
Assembling corps
Collect the corner legs of our table
All legs for table transort assembly
The angular legs of two halves are connected by screws or eccentric. In the same way, the body is collected from long and short Tsarg.
Corps assembly scheme
Detailed body assembly process
We screw the legs to the housing according to the instructions
IMPORTANT! On legs and kings made special holes intended for simultaneous installation of the lift and tie all the design. Check out after the assembly, whether they match.
Collected base with legs
Load plastic spyers to the lower ends of the legs. At the top ends of the Tsarg, install shock absorbers, softening countertops when folding it.
Nail to leg ties
Installation of the lifting mechanism
Lifting mechanism installation scheme
Bring the lift to the working position. For this:
- hold the spring with one end behind the hole inside the lift;
- insert the stud in the groove on the opposite side, which is worn in the second end of the spring;
Spring in working condition, fixed for the mechanism
- screw the lifts to the long, and then to short kings.
Fastened springs for working table transformer
Mechanism in calm undressed condition
IMPORTANT! The legs of the holders designed for the folding countertops are higher than those that are made for the podstoly.
Stamp drive mechanism in the upper position
Installation of table top and podstol
Mount the smaller part of the table top
Install the foundation for a large part of the table top
Screw the bottom of the tabletop table top and the bottom to the platforms of the holders. From the outside of the podstol, install shock absorbers, damping when folding the table top. Movement outside, inside, fold the feet of the lift in the box. It closes the bottom of the table top.
Fix the upper rolling part of the table top
Install the second half so that the end holes for hidden loops are on the one hand, and their intercentrose distance was minimal (about 14 mm). Gently insert the loops and secure screws.
Hidden loops for fixing the table in the assembled state
The table you collected will last long. Do not forget once a year tightening its fastening connections, clean the surface with a dry soft cloth or a special polyroller for furniture.
Journal or table in folded form
The process of transformation of the coffee table in the table for receiving guests
Dining option or table in unfolded form
Video: Table transformer. Assembly
In the store "Many furniture", the transformer table is usually sold assembled. In order not to spend money to work as a master, you can assemble it yourself. As it should be supposed, the table assembly instruction comes with each model, but sometimes it is difficult to understand it without any assistance. Therefore, it is better to use photos and videos in which each stage of work is described in detail.
Where to get started?
Table assembly scheme
Table transformer from "Many furniture" should be collected in stages, starting with the legs. The drawings show in detail how the items twist. It is worth noting that the assembly must undergo technology, otherwise the furniture will not be able to serve you due time. In general, tables are collected according to the following plan:
- Legs.
- Stopper lifting mechanism.
- Frame table.
- Additional shelves and boxes (if available).
Knowing how to collect a transformer table from "many furniture" using the video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a pencil ruler to make marks. It is possible to do it alone will not be quite convenient, the help of a comrade will not be superfluous, at least in order to adhere to some elements of the table.
Features assembly
Be sure to firmly tighten all the bolts in the mechanisms. Since the table will be laid out all the time, you need to take care of its strength in advance. Assembling table of transformer from a lot of furniture will not take much time if you follow the instructions.
Carefully learn the assembly scheme and do everything as it is indicated. Even small retreats will change the quality of the operating table.
Remember that there are various types of original transformer tables. Buying a specific model and collecting it using the video, make sure that the thing you need is presented there. In general, most of them are similar, but even some decoration elements can spoil its appearance. The most popular models today are considered:
- Dolphin;
- Caesar;
- Levmar;
- Demi.
When assembling the transformer table often, the question arises: how are the mechanisms withstand so heavy countertops? There is nothing unusual in this, because their strength is not at all inferior to the sofic variants. They withstand a lot of weight, and their service life installed by the manufacturer will surprise any buyer. Steel fasteners do not diverge even after many years of daily use, the main thing is to firmly fix.
Independent assembly requires sufficient physical strength. A weak woman is unlikely to be able to spin bolts and nuts enough, so you should do this case with men. Tables from a lot of furniture were and remain among the highest quality and reliable, and that is why they are so popular. By collected the model you like, you will understand that I was not mistaken with your choice.
