What is the best Makita impact drill? The best impact drill for the home. Pneumatic drilling device

Long gone are the days when it was necessary to have a hammer drill, a wrench, and a screwdriver. Drive a screw into concrete wall, make a hole in it, tighten the nut, mix the building composition - all this can be done in a matter of minutes if the best drill for home or commercial purposes is chosen. You can find the right model just for you by reading our rating of the most reliable tools.

Economy-class equipment is offered by Ukrainian manufacturers that produce it according to European quality standards. Models with good assembly and long service life are produced by Japanese and Italian companies, for which they set prices slightly higher than the market ones. The most expensive offers are made by German companies.

TOP-9 drill manufacturing companies:

1. Metabo is a German concern for the production of professional power tools. For almost a century of existence, it has become a leader in its industry. Metabo electric drills are always a bestseller.
2. Bison - The business card of a successful Russian company is a combination of quality and durability at an affordable price. This allowed its products to take their rightful place in the world market.
3. Miltar is a brand of the famous German concern Hammer Werkzeug GmbH. Electric drills and others construction tools of this brand are simple, convenient, ideal for home repairs.
4. Zenith- Ukrainian company for the production of inexpensive power tools. All its products undergo a multi-stage check for compliance with all international standards during the production process.
5. STARK GmbH & Co- an Italian conglomerate, founded in 1962 in Italy, provides a guarantee for its products for a period of 1 to 2 years.
6. Makita- a company from Japan for the production of electric and gasoline tools average cost for professionals, began its existence in 1915.
7. Robert Bosch GmbH- a German brand under which, since 1886, elite-class professional electrical equipment has been produced for the needs of industry.
8. Intertool is a Ukrainian trademark that has been on the market since 1999. Among the clients of the company are private craftsmen, professional builders, owners of manufacturing enterprises and service stations.
9. Hitachi is a Japanese conglomerate founded in 1910 in Hitachi and producing vehicles, large and small electrical equipment.

Rating of the best drills

The leaders were determined taking into account the purpose of using the tool - drilling, screwing in self-tapping screws, mixing working mixtures, unscrewing nuts, drilling holes for pipes. Candidates were selected by comparing the characteristics of the product and its price. The winners were chosen based on the following points:

• Tool power;
• Ease of use of the tool;
• Best before date;
• The frequency of breakdowns, the possibility and cost of repairs;
• Brand;
• Purpose of the device;
• Weight and dimensions of the drill;
• Noise level at work.

Consultants of the Rozetka household appliance store know well how to choose a drill, all the tips are available in this video:

The best drills

Such electrical engineering is divided into standard, impact, angle, screwdriver and mixer. The former are suitable for fragile surfaces - wood or plastic, the latter can already work with concrete or metal, the third are relevant for use in confined spaces, the fourth take out or screw in self-tapping screws, screws and screws. The latter are necessary for mixing bulk materials. Such a power tool can be networked (works from a socket) and battery-powered, self-powered.

The best professional drill

Bison ZDM-820 RM is a professional tool with an improved design and a guaranteed high resource. The drill stirs various paints and varnishes and concrete. To do this, it is enough to use the appropriate nozzles. By installing special tools, you can drill holes in wood, steel, brick, lightweight concrete. The high torque of the mechanism allows you to cope even with holes large diameter. Electronic system speed control ensures drilling accuracy, mixing without splashing.

Advantages:

• Metal gearbox housing;
• Resistance of the engine to overloads;
• Key chuck with a maximum diameter of 13 mm for most nozzles;
• The resource of graphite brushes is up to 80 hours;
• Switch holder for continuous work;
• Warranty 5 years.

Flaws:

• Noisy gearbox;
• Short cord.

The best drill for beginners

Metabo SBE 650 (ZVP) - the model is designed for simple work. With its help, even inexperienced builders can achieve excellent results. Easy to operate, reliable, productive electric drill will easily drill holes in concrete - 16mm, in metal - 13mm and in wood - 30mm. Drilling depth limiter and power button lock make all operations safe. If you remove the cartridge, the tool becomes a convenient screwdriver. It is enough to insert the necessary bits into the spindle.

Advantages:

• Electronic speed control system;
• The number of beats per minute up to 44800;
• Power 650W;
• Reverse with rotation direction switch;
• Reliable key cartridge.

Flaws:

• Not detected.

The best drill for home

The Military HD600 is a lightweight, ergonomic, compact power drill. Power 600W, 7500 beats per minute during operation, 3000 at idle. Combines drilling mode with impact. Equipped with a simple and reliable key chuck in operation. The additional handle makes it possible to get into hard-to-reach places, firmly fix the tool in your hands. These specifications speak for the specialization of the Military HD600 electric drill. It is not for professional construction work, but it will be a great helper at home, in the country, on the farm.

Advantages:

• Electronic speed control;
• Reverse function;
• Drilling depth limiter;
• Power button lock;
• Small price.

Flaws:

• Heats up during prolonged use;
• fragile plastic material limiter.

MD1-11E from the Fiolent company - designed for drilling holes in steel and mixing building mixtures. For this, special removable nozzles are provided. The gearbox is made of steel. Comfortable work with the equipment is ensured by electronic adjustment of the spindle speed with M14 thread type (internal). Without a handle, cartridge and cord, the device weighs 4.7 kg, and consumes 1100 W, it makes holes with a diameter of no more than 40 mm for wood and 16 mm for steel.

Advantages:

• Works not too loud;
• Interferes with all mixtures due to the presence of different nozzles;
• Not heavy;
• Adjustable and high speed;
• There is an extension cord included.
• Does not allow automatic activation;
• The drive is isolated.

Flaws:

• Expensive
• Little known brand;
• "Weak" for professionals;
• The kit does not include a whisk and keys.

The best non-impact drill of domestic production

ZDP-500 Profi - works with wood, concrete, metal at a power of up to 500 watts. Convenience at this time is provided by an additional rotary handle and a drilling depth limiter. This model is protected from unintentional activation by the "start" option. An electronic regulator is responsible for the speed of rotation. Comes with a 10mm keyless chuck. The tool weighs 1.4 kg and comes with a warranty of up to 12 months.

Advantages:

• There is an additional handle;
• Acceptable price;
• Good rotation speed;
• If necessary, attached to the belt on a special clothespin;
• Quality build.

Flaws:

• Consumes a lot of power;
• Works in one mode;
• Heavy;
• Sharply goes to high speeds;
• Vibrates strongly.

Best angle drill

Makita DA3011F - suitable for working in small spaces only in drilling mode, available with a lamp spot lighting, keyless chuck type 13 mm, reverse and spindle, making up to 2400 rpm. There is an option to adjust them. The tool operates at a power of 450 W, has dimensions of 28.2x6.1x9.3 cm, weighs 1.4 kg and is powered by the mains.

Advantages:

• Powerful engine;
• The working area is illuminated, you can work in the dark;
• Long warranty;
• Can drill at an angle.

Flaws:

• Small drilling diameter;
• Big sizes;
• Drills noisily;
• Little known brand;
• Drills at one speed.

The best diamond drill for professionals

Bosch GDB 2500 WE is a manual drilling rig designed for concrete drilling with liquid cooling. It has a 2500 W motor, which is equipped with a thermal protection system to prevent overheating. Optimum peripheral speed and high power transmission are ensured by a 2-speed gearbox. Just in case, a fuse is built into the cable. The handle is made of aluminium. If necessary, carbon brushes can be changed. The package includes a dust collector and fixation in the rack of the machine for drilling is provided. The weight of the model is 11.6 kg.

Advantages:

• Popular brand;
• The engine is protected from overloads;
• Multiple speeds;
• Large maximum drill diameter;
• Durable handle.

Flaws:

• Short cable;
• Expensive;
• The electronic stabilizer is junk;
• It is not securely fixed in the riser on the wall.

Bosch GDB 2500 WE is bought most often for use on large construction sites.

The best mini drill

Intertool 1.5-10 mm, 3/8″ (PT-0904) - designed for professionals. The electric motor is replaced by a mechanism for working with compressed air. On average, it consumes 170 liters per minute when the drill rotates at 22,000 revolutions and a pressure of 6 atm. Key type cartridge, made of metal. This model requires lubrication of running parts. The kit comes with a hose with a diameter of 8-10 mm and a reverse is provided. The manufacturer provides a six-month warranty.

Advantages:

• Weighs little;
• Small air consumption;
• Compact body;
• Works under air pressure.
• "Takes" different surfaces.

Flaws:

• The warranty does not last long;
• Difficulty gripping drill bits;
• Unpopular brand.

Hitachi FDV16VB2NA - designed for drilling cement, metal, plastic, brick, concrete, wood. The package includes two nozzles - one for polishing, cleaning and grinding surfaces, the other - for screwing / unscrewing nuts. It is possible to adjust the speed using a special button, this range does not exceed 2900 rpm. The diameter of the holes that the tool can make is no more than 25 mm in wood, 16 mm in metal and 13 mm in concrete. The cooling system does not allow the equipment to overheat. For the convenience of its use, the pistol-type handle is responsible. The device weighs 1.6 kg.

Advantages:

• Universal, suitable for all surfaces;
• Turning on the reverse by pressing the button;
• Convenient to use;
• Available in two configurations - with a regular and keyless chuck.

Flaws:

• Expensive;
• The switch can be locked in active mode;
• The handle is finished with rubber that emits an unpleasant odor.

What drill to buy

In small spaces, a corner model is needed. Stirring of working mixtures is possible with the help of a mixer. For drilling, standard equipment is sufficient. Screwing nuts requires the use of devices with a screwdriver function.

Depending on what the tool is bought for, you can choose:

• Bison ZDM-820 RM is the best drill of a domestic manufacturer.
• The Metabo SBE 650 impact electric drill (ZVP) will cope with work of any complexity.
• AT household useful inexpensive Military HD600.

• Bosch GDB 2500 WE is suitable for drilling concrete.
• Making a hole in a tree will work with Hitachi FDV16VB2NA.
• ZDP-500 Profi will provide comfortable work with metal.
• With limited space and tightening screws, you will need Makita DA3011F.
• For installation and assembly work in production, you will need the Intertool 1.5-10 mm, 3/8″ (PT-0902) model.
• Stirring mixtures will require MD1-11E "Fiolent".

For an overview of good drills, see the video below, which looks at both expensive and cheaper models, comparing high-end products from Makita and Bosch:

The best drill does not have to combine a mixer and other additional features. The main thing is that it works quickly, without failures and performs its tasks.

Among hand power tools, probably the most common is a cordless hammerless drill. With it, you can cope with drilling metal, plastic, wood and other materials. For drilling holes in masonry or concrete, there are impact drills that resemble hammer drills in their properties, but have a cheaper cost that allows these units to be used as a tool for the home.

Our review includes the best models of different levels, including the price. For convenience, drills have been divided into popular categories. The rating was compiled on the basis of the characteristics declared by the manufacturer, the quality of performance and reliability of the instrument, as well as information received from the feedback of the owners who use one of the presented models for personal purposes or in their professional activities.

The best inexpensive impact drills: budget up to 2000 rubles.

Budget drills are bought for rare household chores: drill a hole for a dowel to install a wall-mounted TV, make a hole in drywall, brick or wood. The power of even very cheap models will be more than enough for such purposes. Such a device is perfect as a gift for a man who is not engaged in professional repair work, but is an ordinary home user. by the most famous manufacturer budget impact drills are the companies "Bort" (Germany, China) and "ZUBR" (Russia).

5 Dorkel DRD-500-2

Buyer's Best Choice
Country:
Average price: 1020 rubles.
Rating (2019): 4.2

For a variety of tasks around the home, from drilling holes in wood to drilling in metal and concrete, the Dorkel DRD-500-2 impact drill is the most suitable and inexpensive option. The high frequency makes it possible to make holes in masonry as successfully as if it were done by an amateur-grade hammer drill. It is a little more difficult with concrete, but, nevertheless, it is quite possible for him to drill a hole under the dowel, and not one. Compact dimensions and light weight (1.5 kg) make it easy to hold the drill with one hand.

Despite the good quality, the lack of a speed controller makes its use not very convenient - it is much more convenient to drill the same metal at low speeds. Best price, the presence of an additional handle and a drilling depth limiter provided this tool with decent popularity in the domestic market.

4 VORTEX DU-850

The most powerful in the category
Country: Russia (produced in China)
Average price: 1900 rubles.
Rating (2019): 4.4

The VORTEX DU-850 drill is designed for drilling plastic, wood, metal, as well as concrete or stone (the last two materials are due to the presence of the hammer drilling function). In addition, the presented model can be used as a screwdriver, as it has a reverse option. This impact drill is powered by an 850W electric motor that guarantees speeds up to 3000rpm at idle. You can set the required speed, which depends on the selected material, using electronic adjustment.

The high quality and accuracy of the work performed by the VORTEX DU-850 impact drill is ensured by the presence of a drilling depth limiter. Reliability of fixing of the equipment is guaranteed by the key cartridge. For the convenience of the operator, this model has an additional handle with a soft grip for holding when vertical drilling. In the reviews left for the VORTEX DU-850 impact drill, the owners point to the ample power and performance of the tool necessary to meet the needs of the home.

3 MILITARY HD600

Best price
Country: China
Average price: 1330 rubles.
Rating (2019): 4.4

The 600 W MILITARY HD600 household tool, which can be used as a conventional drill or for impact drilling, will become the best choice for small jobs at home. Despite the modest power, the device demonstrates the most good performance, generating 7500 bpm and 3000 rpm respectively. An additional advantage of this model, noted in user reviews, is the presence of reverse functions and limiting the drilling depth, which greatly facilitates the production process.

The MILITARY HD600 impact drill is equipped with a key chuck that securely holds shanks up to 13mm. The maximum diameter of a hole in concrete made with this tool is 10 mm, and in metal and wood - 13 mm and 25 mm, respectively. The owners of the presented drill in their reviews note the convenience and ease of operation, which ensures the prompt solution of various tasks in the household.

2 Bort BSM-500-P

Popular budget drill. Balanced Features
Country: Germany (made in China)
Average price: 1533 rubles.
Rating (2019): 4.6

The second place in the ranking of the best budget impact drills is Bort BSM-500-P. This device has the lowest cost in the class, but it does its job quite well. The impact mechanism makes the machine suitable for working with hard materials, and thanks to the power of 500 W, it copes with concrete and metal without any problems. The key chuck securely holds the drill even under maximum load in hammer drilling mode. The rotational speed is adjusted using a special switch.

In numerous reviews, users highlight low cost, small size and the presence of several modes as strengths. A special reverse feed will greatly facilitate the development of holes. To ensure the safety of the operator, a switch-on lock button is provided to prevent accidental start of the drill. To make it easier to control the drill during operation, an additional handle is included in the kit. In addition, along with the device comes a case and spare brushes. The disadvantages include the low quality of materials and a fragile case.

When choosing a drill, you should pay attention to the following characteristics:

• Power - the higher it is, the more durable materials the drill can handle. For powerful models, you will have to pay more, but work productivity will increase significantly.
• Power button lock. An important safety feature that prevents the drill from being accidentally started. The blocking is made in the form of a mechanical stopper.
• Cartridge type. In budget models, a key variety is installed, where a special key is required to change the drill. Keyless chucks make it easier and faster to change bits with manual force.
• Additional handle. This detail makes it much easier to work with a drill. Another point of support reduces the load on the hands and allows you to make more accurate holes.
• Length network cable. Since most drills are powered by home network, an important parameter is the length of the cord. As a rule, the manufacturer completes the tool with 4 m cables - anything less requires the use of an extension cord.

1 ZUBR DU-550 ER

The optimum ratio of price and quality. Light (1.6 kg)
Country: Russia (produced in China)
Average price: 1790 rubles.
Rating (2019): 48

Compact impact drill ZUBR DU-550 ER is perfect for performing repair work at home. With its help, you can drill holes of various diameters, the maximum size of which depends on the selected material - for wood it will be 20, and for metal 10mm. Also, due to the impact function, this tool can be used for concrete work. The presented drill has a power of 550 W and provides a performance of 4800 beats / min. At the same time, this model provides smooth speed control in the range from 0 to 3000 rpm, so you can set the most optimal mode for a particular job.

The presence of the reverse function in the ZUBR DU-550 ER impact drill allows you to easily remove an unsuccessfully twisted self-tapping screw (many houses also use it as a screwdriver) or free a stuck drill. The convenience of the operator while working with this tool is facilitated by the light weight of the model (1.6 kg) and the fixation of the start button. Users in their reviews note the simplicity and at the same time the reliability of this drill, as well as the long service life. The presence of a guarantee from the manufacturer for a period of 5 years once again confirms the high quality of the tool.

The best impact drills: price - quality

Hammer drills are used to drill large diameter holes in tough materials such as concrete, metal and stone. A special cam is installed inside, which causes the chuck with the drill to make translational movements, thereby increasing the impact force. Relatively conventional drills such models are somewhat more powerful, but their cost is higher.

5 Hammer UDD1100B

Excellent performance parameters
Country: China
Average price: 5699 rubles.
Rating (2019): 4.3

The Hammer UDD1100B high-performance impact drill, equipped with a powerful 1100W motor, shows the best efficiency, reaching speeds up to 44800 bpm. With its help, you can drill almost any material - you should set only the optimal mode of operation, taking into account its features. In this case, the maximum possible diameter of holes in metal will be 13 mm, in concrete - 16 mm, in wood - 30 mm. The Hammer UDD1100B drill is equipped with a keyless chuck, thanks to which tool changes take place in a matter of seconds. The reverse function allows you to easily remove a drill clamped in the material or cut a thread.

The presented impact drill has 2 speeds of operation, with adjustable RPM 2800 and 1100. The depth gauge included in the kit guarantees the most high precision drilling without resorting to additional measurements. Despite weighing only 4 kg, the tool is easy to handle, as the well-balanced body has a second rubberized handle that reduces vibration and provides a secure grip.

4 Metabo SBE 650 Impuls case

High build quality
Country: Germany
Average price: 5418 rubles.
Rating (2019): 4.5

The high quality of Metabo products means that this impact drill is considered one of the most reliable tools, which, moreover, has a fairly reasonable price. The high frequency of vibrations per minute (44800) provides excellent results in drilling concrete and masonry surfaces. In this case, the maximum allowable drilling diameter should not exceed 16 mm (the drill shank held by the quick-clamping chuck should be up to 13 mm).

Electronic rotation adjustment (located on the start key) provides better performance when working with different materials including wood and metal. There is a device for working with bit equipment without a cartridge, a depth limiter and an additional power handle. It is possible to use a network drill in the form drilling machine. Metabo SBE 650 Impuls is perfect as a tool for the home - the drill is capable of meeting the needs of repairs of any complexity with its performance, and perform many different tasks.

3 DeWALT DWD024

Light weight (1.6 kg)
Country: USA (made in China)
Average price: 4490 rubles.
Rating (2019): 4.5

The third place in the ranking of the best impact drills goes to DeWALT DWD024. This model is a solid medium. At an affordable price, it has excellent features that can compete with top models. The power of the drill is 650 W, which is enough for working with hard materials such as concrete and steel. The proprietary design of the key chuck (the key is included) greatly facilitates the process of changing drills, while the teeth on the lock nut do not grind off. Hammer drilling mode allows you to quickly and accurately make holes even in difficult surfaces.

Among the strengths of this model in the reviews, users highlight the pleasant and durable case material, good reliability and a long rubberized cord. Reverse mode will help when drilling complex holes and developing large diameters. The mechanical blocking of the power button will allow you not to worry about accidentally starting the tool. Among all the representatives of the rating, it has the smallest weight, which is convenient for long drilling. The negative aspects of operation include the lack of low speed and overheating during intensive work.

2 Makita HP1640

The optimum ratio of price and quality
Country: Japan (manufactured in Romania)
Average price: 4250 rubles.
Rating (2019): 4.6

In second place in the ranking of the best impact drills is the Makita HP1640 model. This is an inexpensive device with decent performance and good reliability. The Makita drill is equipped with a key chuck, which can hold drills with necks from 1.5 to 13 mm. Power is supplied from a household network of 220 V, which will allow you to operate the tool in almost any room. The power of the drill is 680 W, which allows it to drill concrete with drills up to 16 mm in diameter. Rotation speed up to 2800 rpm ensures excellent performance.

In numerous positive reviews, buyers talk about light weight, good ergonomics and good assembly as the strengths of this model. Besides, for simplification of work complete with a drill the additional handle is delivered. A special drilling depth limiter will help you correctly calculate how much you need to feed the tool to get the desired hole. The drill can be used stationary - it is possible to install a drilling machine in a rack. The disadvantages of this model include the illogical arrangement of the switches and the lack of a case in the kit.

1 BOSCH UniversalImpact 700 Case

The best functionality. Keyless chuck
Country: Germany
Average price: 6907 rubles.
Rating (2019): 4.8

Bosch PSB 750 RCE Case (BZP) is the best impact drill in terms of price and quality. This device boasts German brand reliability, and despite a slightly higher cost, it is popular. Unlike competitors in the rating, the BOSCH tool is equipped with a keyless chuck, which significantly reduces the time to replace the drill. The power of the drill is 800W, and this best indicator in TOP. The maximum torque is 19 N * m, due to which the device will easily come out of any, even the most difficult, holes.

The advantages of this model in the reviews, users include an ergonomic handle, high build quality and a large case included. Thanks to the electronic speed control, you can set the optimal parameters for a particular material. The drilling depth limiter is made in the form of a metal pin - this part will allow you to accurately set the size to which you need to feed the drill. The spindle lock will be convenient for quick replacement of the drill. Among the weaknesses are overheating during operation and an unreliable reverse mechanism.

The best professional impact drills

This category features the best and most durable impact drills that can easily handle large volumes of work and serious loads. The models have much in common, but the main distinctive feature is the high build quality and reliability of components.

5 Metabo SBEV 1300-2 S (BZP) Case

The most powerful impact drill
Country: Germany
Average price: 14879 rubles.
Rating (2019): 4.6

Impact drill Metabo SBEV 1300-2 S (BZP) Case is distinguished by high build quality and decent torque - 44 N * m. At the same time, the unit is able to drill holes in concrete with a diameter of 22 mm. The safety clutch ensures a long service life of the tool - under any operating conditions, the engine, whose power is 1.3 kW, is protected from overloads. At the same time, the percussion mechanism is capable of delivering up to 58,900 blows in one minute - not even every puncher has such characteristics.

The keyless chuck may not be used for its intended purpose - it is possible to do without it when working with bits. This corded impact drill can safely be considered one of the best professional tools, but if Metabo SBEV is purchased as a device for the home, its resource will last not only for life, but will also remain for grandchildren. The unit weighs 2.8 kg, and, of course, a durable case is provided for its storage and transportation.

4 DeWALT DWD522KS

High performance
Country: USA (made in China)
Average price: 15700 rubles.
Rating (2019): 4.6

The powerful DeWALT DWD522KS is the fourth best professional impact drill. quality tool with a power of 950 W, it easily drills holes up to 20 mm in concrete and up to 13 mm in metal. The SDS keyless chuck accepts drills with a diameter of 1.5 to 13 mm. Hammer drilling mode greatly increases work efficiency. The percussion mechanism delivers up to 56,000 bpm, which also increases productivity. The drive is equipped with a safety clutch, which, in the event of a jammed drill, will disconnect the spindle from the gearbox, thereby preventing its destruction.

As the advantages of this device in the reviews, buyers call good power, good build quality and the presence of a case in the kit. Thanks to a special additional handle, holding the drill is much more convenient. The rotation speed is adjusted using a special rotary switch. The disadvantages of this model include a short network cable and poor ergonomics.

3 Bosch GSB 19-2 RE Case (BZP)

Favorable combination of price and quality
Country: Germany (produced in Russia)
Average price: 10485 rubles.
Rating (2019): 4.6

An excellent combination of price and quality is observed in the Bosch GSB 19-2 RE Case (BZP) drill. The model is intended for professional use. It is equipped with a powerful motor (850 W), 2-speed gearbox, overload safety clutch. The work of the tool from the stand of the drilling machine is provided. Maneuverability of the electrical cable provides articulated fastening. To continuously drill, a switch lock button is provided. The operator can hold the device for a long time thanks to a comfortable handle with a soft grip. The model is quite compact and light.

Of the advantages of the Bosch GSB 19-2 RE Case (BZP) drill, professionals distinguish good quality, convenient case, reliable cartridge, durable cord. With disbelief, users look at Russian assembly. Of the frequent breakdowns, the reviews mention the failure of the gearbox, and there are also problems with spare parts.

2 Makita HP2070F

High build quality. Reliable operator protection
Country: Japan (made in China)
Average price: 9922 rubles.
Rating (2019): 4.7

An excellent professional tool with high performance and reliable operator protection is the Makita HP2070F impact drill. With this model you can drill holes in metal, wood, plastic, ceramics, concrete and natural stone. Thanks to a powerful motor (1010 W) and electronic control, the tool works stably at a given level of rotation speed. The case is made of impact-resistant plastic, the internal mechanism is protected from dust, which has a positive effect on the durability of the device. The drill is versatile, it will be equally pleasant to drill with it for right-handed and left-handed operators.

Professional builders and installers emphasize such qualities of the Makita HP2070F model as high performance, durability, versatility, safety, ease of use. Users are dissatisfied with the work of the safety clutch against jamming.

1 METABO SBE 850

The best functionality. Working in a drill stand
Country: Germany
Average price: 12250 rubles.
Rating (2019): 4.8

Drill METABO SBE 850 is the leader of the rating among the best professional models. The device has excellent functionality and good power (850 W), which allows you to cope with materials such as steel and concrete. This is due to the high torque (36 Nm) that the electric motor develops. A 2-speed gearbox, as well as a switch for impact and non-impact drilling, allows you to choose the optimal drilling mode. You can use the tool as a screwdriver due to the pulsed mode. To protect the internal mechanism from jamming of the drill, a safety clutch is provided. You can reduce the dimensions of the model by installing bits without using a cartridge.

Users refer to the advantages of the METABO SBE 850 drill such qualities as reliability, rich functionality, long cord, comfortable handle. The disadvantage of the device is the high price and low-quality cartridge.

The best hammerless drills

Non-impact drills are used to drill holes in almost any material. Due to the absence of an impact mechanism, they have smaller dimensions and lighter weight, which has a positive effect on the accuracy and quality of drilling. However, to work with durable materials, models with more power are needed, which are somewhat more expensive than impact counterparts.

5 Rebir IE-1206-16/2000ER

The most powerful torque. High build quality
Country: Latvia
Average price: 10315 rubles.
Rating (2019): 4.4

This tool by no means can be called a drill for the home. This professional shockless unit develops a huge torque - 431.2 N * m. The key chuck can hold drills with a tail thickness up to 16 mm. At the same time, Rebir IE-1206 is capable of drilling holes in metal with a diameter of 32 mm, and in wood - up to 70 mm. The weight of this "monster" is 6.3 kg - it will not work with one hand.

At the same time, the device with the highest power of 2 kW has a universal option - it can be used as a mixer for cooking mortars. For this purpose, the set includes two handles, and on the body of the power drill there are threaded holes for their installation. It is also actively used when twisting piles, because the tool has a reverse. It is much easier to work with such a powerful unit. The package includes spare motor brushes. Reliability and high build quality allow the manufacturer to safely assume warranty obligations for up to 2 years.

4 Interskol D-16/1050R

The best ratio of price, functionality and power
Country: Russia (produced in China)
Average price: 4400 rubles.
Rating (2019): 4.5

Domestic drill Interskol D-16 / 1050R takes pride of place among the best unstressed models. The device stands out affordable price, while its power is 1050 watts. In a large key chuck, drills with a diameter of up to 16 mm can be securely fixed. The presence of a reverse helps to remove the cutting tool intact when jammed in the material. The use of high-quality parts and assemblies allowed the manufacturer to extend the time of the drill without stopping. Even under high load, the engine does not overheat. The model is equipped with an additional handle, which can be installed both under the right and under the left hand.

Among the positive qualities of the Interskol D-16 / 1050R drill, users highlight accessibility, high power, quality factor of parts and mechanisms, and ease of maintenance. The reverse switch is not very well located, back cover not durable, brushes wear out quickly.

3 Bosch GBM 13 HRE (ZVP)

The best reliability. Long service life
Country: Germany (produced in Switzerland)
Average price: 15730 rubles.
Rating (2019): 4.6

The non-impact drill Bosch GBM 13 HRE (ZVP) has excellent reliability. It is equipped with a powerful electric motor (550 W) and high torque (60 N * m), which allows you to use the tool as a mixer. The durability of the device is ensured by a durable metal case, high-quality needle and ball bearings, as well as milled gear wheels. In order to distribute the power in accordance with the density of the material, there is a 3-stage reduction gearbox. With proper selection of equipment and cutting tool you can make holes up to 80 mm in diameter, as well as stir plaster, putty or glue.

For many users, the Bosch GBM 13 HRE Hammerless Drill (HRE) is a specific tool. Most satisfied with it are builders who have to drill and mix various formulations. The disadvantage of the device is high price and low operating speed.

2 Makita DP4001

The highest quality professional tool
Country: Japan
Average price: 14700 rubles.
Rating (2019): 4.6

The Makita DP4001 professional drill takes the second place in the ranking of the best. This model is designed for serious construction and repair work. The maximum torque is 51 Nm, which allows the drill to drill easily even in hard surfaces. The standard Makita keyless chuck is convenient for frequent changes of drills, the shank diameter of which can vary from 1.5 to 13 mm. The presence of electronic speed control will allow you to set the optimal speed for any material.

Among the strengths of this drill in the reviews, buyers highlight good build quality, thoughtful ergonomics and light weight. Thanks to the additional handle, it is much more convenient to work with the device. The weight of the tool is only 2.1 kg - you can even hold it with one hand. The main disadvantages of this model are poor-quality material of the network cable and an inconvenient reverse switch.

1 DeWALT DWD014S

Optimal weight distribution (ease of use)
Country: USA (made in China)
Average price: 5039 rubles.
Rating (2019): 4.8

In the first place in the ranking of the best hammerless drills is the DeWALT DWD014S model. This is one of the most convenient models: thanks to the ideal weight distribution, even long-term work with this device does not tire the operator. The power is 550 W, which is enough for drilling metal with drills up to 10 mm in diameter. The maximum rotation speed of 2800 rpm ensures high productivity. The reverse mode will be convenient when working with holes of large diameters.

In positive reviews about this model, buyers talk about well-thought-out ergonomics, a long cord and a powerful cartridge. A quick-clamping version is installed here with the ability to install drills from 1 to 10 mm in diameter. Electronic speed control will help you choose the optimal drilling speed for each material. Unlike other representatives of the rating, this model is equipped with a power button lock. The weaknesses include the lack of an additional handle and a fragile body.

1. Main characteristics
2. Structural elements
3. Models
4. Bosch
5. Makita
6. Hitachi
7. Metabo
8. Interskol
9. Vortex

Using a drill, holes are formed, dismantled, fasteners are screwed, solutions are mixed, and other construction operations are performed. The nature of the work depends on the nozzle and the technical capabilities of the tool model. The article is devoted to drills with a percussion mechanism.

Main characteristics

The drill in impact drills performs rotational and reciprocating movements, which allows you to make holes in almost any material. This functional feature brings the tool closer to a puncher.

The principle of operation is based on drilling, while the hammer drill is characterized by chiselling.. This is their main difference.

An impact drill is purchased if the power of conventional drilling equipment is not enough or hard surfaces are required in which it is difficult to form a hole.

Structural elements

The basis of the tool is a 400–1500 W motor. Two-speed electric drills are usually equipped with a 700W motor or more.

Equipment with a powerful productive engine is often compact.

The corded impact drill is equipped with a gearbox, one- or two-speed. Two speed models have an increased torque limit. High-speed performance is lower, but during domestic work this feature does not bring inconvenience.

Reverse (reverse movement) allows you to wedge the drill, unscrew the screws. The option is available in almost all professional models.

Overload protection prevents the motor and gearbox from failing when the drill is jammed. Required for safe operation power tool.

The impact drill can be fitted with a keyless and toothed chuck. In the first case, no additional fixing devices are required. The fastening of the gear element is carried out with a special key.

When choosing a unit, you need to focus on the length of the cable.

A four-meter cord is optimal.

Models

Impact drills Bosch, Makita, Metabo, DeWALT, Hammer, Skil, Hitachi, Einhell are often used. From domestic manufacturers, the trademarks "Zubr", "Whirlwind", "Interskol", "Fiolent" are chosen.

Bosch

Products with keyless chucks, reversing mechanism and engine speed control. It is convenient and safe to work with samples: there is an electronic control. Good models: PSB 650 RE, PSB 500 RE, PSB 530 RE, PSB 750 RCE, PSB 450 RE, GSB 16 RE, GSB 1300. So, the Bosch GSB 1300 impact drill weighs 1.8 kg, is compact, has a power of 550 W, suitable for various repair and construction tasks.

Makita

Models HP1630KX2, HP1620, HP1621F, HP1641F, HP1640K and HP1630K are used for drilling holes in stone, metal, brick, concrete. The speed controller has a blocking function. The reversing mechanism allows you to change the direction of rotation of the drill.

Hitachi

Japanese electric drills with an impact mechanism are distinguished by quality, reliability, high performance. Tools have a convenient design, strong body. Often choose Hitachi FDV16VB2, Hitachi DV13VSS and Hitachi DV16VSS.

Metabo

The Metabo SBE 650 model is equipped with a convenient speed control system. The additional front handle allows you to rationally distribute the load on two hands, which has a positive effect on drilling accuracy.

Skil

The American company in 1996 became part of the transnational corporation Bosch. In the line of impact drills, the Skil 6950 AD Torro model stands out, designed for drilling holes in surfaces made of metal, plastic, brick, wood. The economical and efficient unit is equipped with all the necessary functions, suitable for home work.

Interskol

Universal impact drills are distinguished by drilling accuracy, high performance, and build quality. Good models: DU-13/580ER, DU-13/750ER, DU-16/1000ER. Tools with a magnesium alloy gearbox, which prevents overheating during long continuous operation. Due to the drilling depth limiter, it is more convenient to drill non-through holes.

Vortex

Domestic impact drills are equipped with a reverser, a drilling depth regulator, and have a blocking function. Models DU-850 and DU-1100 are distinguished by an ergonomic body and comfortable handles.

I would drill a wall and hang a shelf, advise which drill to choose for this? We think that users will agree with the argument that this is often how the question is formulated when it comes to buying such an indispensable tool in construction as a drill.

Where to start your choice? After all, one master needs a drill in order to drill a couple of holes in a wall folded from, and another to correct errors in.

As practice shows, the choice of tool directly depends on the type of work. And before you go to the store for a purchase, you need to understand what a drill can do?

A modern drill is a multifunctional power tool with which you can perform a huge range of different jobs - drill holes in wood, metal, brick and concrete. And the use of special nozzles allows you to significantly expand the scope of this tool - from mixing solutions to grinding.

If you urgently needed a wood splitter, a pit drill or a concrete mixer, then details how to make them yourself.

to the main types electric drills relate:

• Hammer drill. In addition to the usual rotational movement, this drill can perform reciprocating movements - forward and backward, which is necessary when drilling such durable materials like concrete or brick.

When working with wood, plastic and metal, this function must be disabled.

• Cordless drills. Allows you to work in hard-to-reach places where access to an electrical outlet is difficult.

These drills are heavy and about more cost.

• Perforators. They are primarily designed for drilling concrete. The main difference between a hammer drill and an impact drill is the force of impact. For a hammer drill, even for the weakest one, this value is at least 1.5 J, while for an impact drill this figure does not exceed 0.5 J.

Please note that the impact drill is not intended for permanent job with the impact function turned on, as this leads to premature wear of the mechanism and breakage of the drill.

But what else do you need to know when choosing a drill? Opinion of the user of our forum Python24:

- Drills, like any other power tool, are professional and household. The two main differences between a professional tool and a household one are:

1. Operating mode.
2. Product resource.

For example, a drill may work in a production line, where the same operation will be performed for many hours. For such work, a professional drill is required, which ensures a long service life and high labor productivity.

The same can be said about drills, which are constantly used in professional construction, such as private or apartment buildings.

Python24 :

- A household tool cannot be used in this mode. And a single turn on of the drill should not exceed 5-7 minutes, while any power tool with a collector electric motor really does not like continuous work"pull-in".

If you "press" the tool harder, it can lead to premature wear and breakage.

When choosing a drill, you need to know about the methods of fastening the drill in the chuck. The design of the cartridge is of two types:

• Cam clamp. In such a chuck, the tool is fixed with a special turning key, which ensures reliable fastening of the drill.

In order to prevent the key from being lost, a special cutout is provided in the electric cord of the drill.

• Quick release chuck. Allows you to quickly change the tool, as they say, with one hand.

The main disadvantage of a keyless chuck – when drilling heavy materials, such as concrete, due to the ingress of fine abrasive dust or insufficient torque when tightening, the drill may turn in the chuck. And when buying a drill with such a chuck, you should give preference to a metal keyless chuck.

You should pay attention to the presence of a drill such functions as:

• Rotation speed regulator. Allows you to smoothly change the speed of rotation, which allows you to use the drill as a screwdriver.
• Reverse. With it, you can change the direction of rotation, which is especially important if the drill is used as a screwdriver or it becomes necessary to pull out a drill stuck in it from a drilled hole.
• Depth gauge. A special bar with markings, installed parallel to the cartridge. With the help of a depth gauge, you can monitor the depth of drilling.

As for the power of the drill, our forum member Manag believes that a drill with a power of about 500 watts is enough for domestic needs. The opinion of another user (nickname on the forum Spdim) :

– The power depends on which house you live in and what you are going to drill - concrete, drywall or wood. To be honest, in my apartment I prefer to have a light hammer drill with a power of about 1 kW with an adapter for conventional drills and a powerful screwdriver. At the cottage is another picture. There you need a good drill and a heavy hammer drill, and a screwdriver.

Python24 :

- Often people are mistaken, preferring, for example, a kilowatt low-speed drill household purpose low-power, resourceful, and professional for the same money. Explaining that since I bought a professional drill, it is more reliable and will last longer. But if, at low speeds, you start stirring the solution for tiles with such a drill or drilling metal, then in those modes where a kilowatt drill would work in such modes for many years, a low-power drill will wear out faster, which will eventually lead to its breakdown.

The simplest drills at 3000 rpm and a power of 250-500 W, with a speed controller, a reverser, and an impact mechanism, in most cases, are only suitable for drilling small holes in wood and plastic. All other functions should be used with great restrictions. That is why drills with power from 500 to 1000 watts should be considered the most versatile.

Additional factors that affect the quality and functionality of the product:

• Side handle. Allows you to hold the drill with two hands, which greatly facilitates the work.
• The drill has two speeds. With this function, you can switch the speed from high to low, which expands the functionality of the drill, allowing it to be used as a mixer for mixing solutions.
• Metal gearbox housing- cools the drill mechanism more efficiently than those made of plastic.

Summing up, we can say that when choosing a drill, you should first of all focus on the area of ​​\u200b\u200bits application. And where you can get by with a simple and low-powered model, you should not use a heavy professional drill. And ideally, for each type of work, you should use your own type of tool!

Learn more about how to choose a drill, users can our forum. How to choose a perforator is described. And this video clearly describes what functions you need to pay attention to first of all when choosing a drill. Members of the forum are having a heated discussion on how to choose a circular saw.

For household chores, you need a variety of tools, including an impact drill: without it, you can’t hang a picture, you can’t fix a cornice or a shelf. Which impact drill to choose, what to look for? Many people ask themselves this question when visiting a specialized store. In order for the choice of an impact drill to be deliberate, you should first arm yourself with information about this tool.

The principle of operation of the impact drill mechanism is based on the transmission of both rotational and reciprocating motion (impact) to the drill by two ratchets. The power of this type of tool is from 400 to 1500 W, the speed of the rotor of the electric motor is up to 3500 rpm. The higher the power and frequency, the easier it is to work with the tool.

The best impact drills come with user-friendly options. When drilling for a long time, the trigger must be fixed: this is done using a small button located on the side of the handle. It is required to check it in action: the button should be easily recessed and quickly, effortlessly return to its original state.

The reverse function is useful in many cases: it is necessary to remove a stuck drill or to unscrew a screw.

The ability to select the optimal speed reduces the load on the tool. The rotational speed of the chuck jaw is controlled by the force of pressing the finger on the trigger.

Which impact drill is best

It all depends on what it will be used for. Drilling concrete and natural stone requires a powerful tool. In this case, you need to purchase a power drill: the battery will not cope with the task. If a hole is needed in cinder block wall or laid out of foam concrete blocks - it makes no sense to spend money on a heavy and powerful drill: a low-speed tool of 400 - 600 W will be enough. The battery version is suitable in this case: "mobility" will expand its scope. The presence of a switch for the functions of impact and non-impact drilling is mandatory.
It is also recommended to consider:

• time of continuous operation (should be indicated in the passport from the manufacturer): a professional tool has a large load limit;
• maximum diameter and type of drill used (depending on the cartridge): for home use the SDS standard is applied, more powerful - SDS-plus;
• cartridge design: there are options for quick extraction of the drill;
• complete set (storage case, additional handle, set of drills, drilling depth limiter, various nozzles and adapters);
• ergonomics of the body and handle: if the tool is comfortable to hold in your hand, and your finger can easily reach the trigger, it will work safely.

The surface must not be slippery. It is important that the drill is balanced: the center of gravity should be closer to the trigger handle (in the absence of an additional handle) or in the middle. Soft rubber pads will reduce vibration transmitted to the hands.

Main technical characteristics

How to choose an impact drill technical specifications, sales assistants in the store can tell, but to select a tool on the Internet, you need to have information. Pay attention to the following specifications.
1. Drill power: the speed of rotation and force depend on it. Most of the power tools in the middle price segment, have a power in the range of 550-800 watts. Such an impact drill is suitable for home use, but it is easier to drill concrete with a professional tool with a power of 1000 watts or more.
2. The frequency of impacts and revolutions: the higher the value of this parameter, the higher the “performance” of the drill. Most of the rotational speed various models– from 2500 to 3000 rpm. A special regulator allows you to reduce it if necessary. The frequency of impacts affects the speed of passage of the processed material and is in the range of 43 - 48 thousand beats per minute.
3. Drilling diameter (maximum): this parameter limits the use of the tool to prevent its failure. Information about the value of this parameter is indicated in the passport of the impact drill. Drilling holes of large diameter in hard material is accompanied by critical loads on the motor and drill mechanism.
4. Chuck type: This part of the tool is designed to hold the drill. There are key chucks and keyless chucks. A special key is required for the key chuck; it is inserted manually into the quick-clamping drill. This saves time, but the key cartridge is more reliable.
5. Reverse - a special function that facilitates the removal of the drill in case of jamming in the material. It also allows you to use a drill to remove screws and screws.

Examples of the most popular models

The German company Bosch has established itself as a manufacturer of reliable equipment. The Bosch GSB 21-2 RCT Professional impact drill has a power of 1300 W, which allows you to use it for professional purposes and operate continuously for a long time. The model is suitable for mixing dry building mixes, for drilling with crowns.

• control of the constancy of the frequency of revolutions by electronics;
• the possibility of pre-selection of torque;
• Antirotation clutch protects against damage during difficult work;
• the brush holder provides the same force when rotating clockwise and counterclockwise.

Makita has long been popular with both professionals and home craftsmen. Makita HP1640 impact drill can be used for drilling any materials: wood, metal, brick, concrete and others. The power of the drill is 650 W, the number of revolutions is up to 2800 per minute. This light and small tool is capable of drilling holes in concrete with a diameter of up to 16 mm, in wood - 30 mm; in steel - 13 mm.

Impact drill Interskol DU-16 / 1000ER - a domestic tool with good performance and equipment:

• 1000 W electric motor;
• two-speed gearbox;
• reverse rotation of the cartridge;
• the possibility of smooth adjustment of the rotational speed;
• ergonomic body.

Impact drill Hitachi DV16 VSS (Japan) can be recommended for home use, but it belongs to the class of professional tools. The key chuck securely holds the drill, and the drilling depth limiter will not allow you to make a mistake.

The power of the drill is 600 W: this is enough for drilling concrete with a drill with a diameter of up to 16 mm. The side additional handle allows you to securely hold the tool in your hands.