How to build a budget fence for a summer cottage - the choice of building materials. Do-it-yourself solid fence to the dacha: we use proven and improvised materials How to choose a fence. Types of fences

A summer cottage is not only a great place for family recreation and self-expression in the cultivation of useful cultivated plants. This is the same house, only it is used, as a rule, temporarily. Although, it is not uncommon for the cottage to be used for permanent housing. And this means that important importance must be attached to the fence of the site. Firstly, it should hide to some extent private life from prying eyes, and secondly, ensure the safety of property. What to build a summer cottage fence from? Is it possible to do it on your own and how exactly - all these points will be considered below.

Fences for a summer residence

The fence in this case is a real attraction, especially since when using any non-standard building materials, you can show a lot of imagination and supplement the building with any elements you like: flowerpots with plants, stained-glass windows, various decorative elements. Such building options, as a rule, cannot be found on the Internet, they are embodied according to the ideas that came to mind.

However, if we think technically, then the following types of fences are the main acceptable and more or less popular:

Wooden,
Metallic,
Slate,
Brick

In this article, let's look at the main options in order to understand which would be the ideal choice in your particular case.

Wooden fence

Probably the most popular material for many years. Today he is not going to give up his positions and occupies a leading place among the possible products for the manufacture of fences. This is especially true in summer cottages, since wood is not so expensive, but at the same time beautiful and durable enough, with proper installation and maintenance, of course.

The fact is that there are a huge number of options for wooden fences, as well as wood materials for their manufacture. There is a difference between wood and wood - not only the final appearance of the fence will depend on what kind of wood you have, but also the technology of its manufacture and service time. First of all, wooden fences are good because you can easily install them yourself.

Log palisade fence

For the manufacture of a log palisade, wooden logs are used - this is not only an ancient-looking design, but also a reinforced structure, which has significant protective properties. It is preferable to choose logs that are even, the same, the optimal thickness is from about fifteen to twenty centimeters.

The technology for making a stockade is quite simple, but painstaking. The main task here is to protect that part of the logs that will be in the ground - after all, the tree is very susceptible to destruction in conditions of high humidity. Therefore, having trimmed the logs to the desired size - keep in mind that a third of the log will be in the ground - be sure to treat this part with hot tar. Such a simple precaution will allow the picket fence to last for more than a dozen years. The fence will look more beautiful if the bark is removed from the logs before installation and treated with a special primer.

Under the picket fence, it will be correct to lay a strip foundation, this will prevent its subsidence and premature destruction. In the process of building such a fence, do not forget to set the logs according to the level - then the finished fence will delight the eye with its even appearance. As a rule, the palisade is mounted in a specially dug trench, on a foundation or a cushion of gravel - setting the logs and carefully filling their base with earth.

The above-ground part of such a fence would be best covered with wood stain and drying oil - to avoid cracking and damage to the wood from weather conditions. It is not uncommon for a strong foundation to be made under the palisade - it prevents moisture from entering the fence and additionally has a decorative function.

Fence for giving from a vertical picket fence

The most common type of wooden fence. Picket fences were installed many centuries ago, they are relevant to this day. It's simple, beautiful, budget-friendly and convenient.

The installation of a picket fence involves the manufacture of a frame for it. For this, it is most convenient to use a metal strip or pipe. The frame is welded at the level, and its base is concreted in the ground. For a set of pickets on the frame, you can use wooden poles - this will save money, since they are much cheaper than metal ones. The poles should be parallel to the landscape and perpendicular to the metal supports firmly embedded in the ground.

But in installing a picket fence, the flight of imagination is not limited - just one continuous canvas, sections, in pairs, "herringbone", there are many already invented options, and also, no one will bother you to create your own individual design.

A picket fence is a universal type of fence; it can be used for almost any site. By playing with its finishes, you can get completely different styles. For a strict classical building, a monochromatic fence of not bright colors is suitable.

If at the dacha there is a small house immersed in greenery, a rare picket fence painted in white or another light shade will look great. A high, two-story building, large-sized plot - they require a high fencing, pickets can be opened with varnish, and climbing plants can be planted under the fence. If the owners prefer to completely hide their yard from prying eyes, a high, dense picket fence will become a good fence - it can be covered with a stain or paint of a suitable shade.

Horizontal picket fence

This is, as a rule, a low structure, the principle of which is: long poles attached to posts dug into the ground. The posts are located at the same distance from each other - depending on the length of the poles. It is also necessary to build a structure clearly in terms of level - this is the main condition for obtaining an even and beautiful fence.

The processing of materials for such a picket fence is completely identical to the previous version of the fence. It can be paint, drying oil, stain or varnish, or it can be a combination of these ingredients.

Wicker wood fence

We can say that this is one of the varieties of the horizontal picket fence, since the poles are also located horizontally in it.

Weaving wattle fence is not particularly difficult, but it requires perseverance. The exact technique of execution can be found online or performed at your discretion, acting purely intuitively.

Of course, the wattle fence does not have protective qualities as such, it is, rather, a decorative type of fence - it can be used to decorate a garden plot or perform a zonal division of a summer cottage area. This type of fence is not particularly durable, although it is possible to extend its life for several five years, for this you need to remove the bark from the poles and treat them with a special agent that protects the wood from pests, dampness and temperature extremes.

Wooden lattice fence

Openwork and outwardly very attractive in its lightness, structure. Such a fence consists of flat wooden slats that intersect with each other. These planks are stuffed onto the base - a frame made of wooden beams. The lattice can be thick or large, at different angles, it all depends on the desire of the performer.

A similar plan of fencing is convenient both for facade and for internal delimitation of the site, often the same gratings are used for arranging gazebos or recreation areas. They can be painted, treated with wood stain or colored varnish.

Metal fence for summer cottages

Metal materials for the construction of a summer cottage fence are also not uncommon. It is durable and resistant to weather conditions - frost, precipitation, material. Of metal products, for fences in this case, only a few options are relevant:

Fence from a metal mesh "chain-link"

With its help, you will get the simplest, visually unpretentious fence. It is not very suitable for the facade, especially if the dacha is in a busy place, since the grid itself does not hide anything that is on the site from prying eyes. It is completely transparent.

Climbing plants planted near the fence can save the situation a little, but this is an option only for the summer season and will come in handy if only the dacha is used seasonally.

It is most reliable to fix the mesh on specially welded frames. Frames can be made of metal corner or strip. A mesh is attached to each such section, and then each section to the supports previously concreted into the ground. In more primitive versions, you can do without frames - just fix the mesh directly on the supports - it is best to use a metal pipe with them. But such a fence will not be as strong and stable as the first option.

The advantage of a metal mesh is its corrosion resistance to precipitation, provided, of course, that it is simply made of ferrous metal, and additionally processed, for example, galvanized.

Such a fence, due to its ability for unhindered air circulation, is perfect for a garden or vegetable garden - where air flows are important, and there is nothing to hide from outsiders.

In installing a fence from a chain-link, it is important to set the support pillars as evenly as possible - this must be done according to the level and thoroughly fixed - for this they need to be concreted, filling with a sand-cement mixture, with the addition of gravel.

The second important point: when pulling the mesh on the frame, you need to avoid the slightest distortions, otherwise the mesh forms a "sail", which will ruin the entire appearance of the finished fence. Galvanized mesh does not need to be processed, therefore, only frames and supports need to be primed and painted.

Fence from a profiled sheet

Fences have been popular for several decades due to their strength characteristics, low cost and aesthetic appearance. A country fence made of a profiled sheet is beautiful and for a long time.

What is needed for this? Actually, the profiled sheet itself - it can be of several standard sizes, the width and height vary and it is convenient to choose the required dimensions. As for the appearance, there is also where to roam: corrugated board is both galvanized and painted, and even if there are not so many shades of it, nevertheless, there is something to choose from.

It is not difficult to install a fence from a profiled sheet, a foundation is not required for it, just support pillars, firmly concreted into the ground, are enough. Metal pipes are also excellent supports. Before attaching a fence to them, they must be opened with a primer and painted to avoid the appearance of rust under the influence of precipitation. Horizontal logs are attached to the ready-made supports - they can be from a wooden bar (it also needs to be opened with a protective agent), and even better, from a metal strip or corner.

The metal sheets can now be installed. The profiled sheet is made of thin metal, 2-5 mm thick, therefore, this material is lightweight and can be attached simply - on special self-tapping screws, please note that if your profiled flooring is colored, then you need to take the same colored self-tapping screws under it - then they will not stand out on finished fence.

It is necessary to install the profiled sheet not end-to-end, but overlap each other - each next sheet should go at least one gyrus to the previous one. Only in this case, the fence will be durable and beautiful - the sheets end-to-end, eventually disperse, even from gusts of strong wind.

This material is also successful in that it can be combined in an excellent way with other building materials. For example, a rather popular combination: brickwork is the basis of the fence, in each section of which a colored sheet of corrugated board is attached.

Or an equally common option: profiled sheet with elements of figured forging or stamping. You can come up with a lot of your own, completely exclusive variations with a professional sheet, since it is easily attached and fits almost everything.

There is no need to process the profiled sheet, no matter what it is - painted or galvanized. It is absolutely resistant to moisture, low and high temperatures. Its only drawback is that a colored profiled sheet can change its color if it is in direct sunlight for a long time. But this is not particularly critical, since in this case, the color will change the entire fence.

Metal picket fence

A picket fence is a very popular design for fencing, including for summer cottages, which, thanks to modern technologies, has made it possible to manufacture metal pickets. It is the perfect combination of excellent durability and classic design. The metal picket fence is at the same time resistant to aggressive weather conditions, and at the same time - a light, well-ventilated and beautiful fence.

On sale, this type of material is presented in two versions: it can be bought in the form of ready-made sections or disassembled. The finished sections consist of a set of pickets on the base, they just need to be fixed on the supports, and the fence is ready. But in disassembled form, you will separately acquire the pickets themselves, fasteners, guides. The metal picket fence is not picky in assembly, it is quite easy to mount it yourself, and if you decide to buy ready-made sections, the installation will take a minimum of time and effort.

The pickets visually bear some resemblance to a solid sheet of corrugated board - it is attached by the profiled edges of the planks. This also gives them rigidity - the structure as a whole will be solid, despite the presence of gaps between the pickets.

Nevertheless, a picket fence can be completely closed, this is possible in the case of a double covering - when pickets are attached to both sides of the transverse guides - of course, such a fence will cost much more, but it will not allow prying eyes to penetrate beyond the fence.

A metal picket fence can be the same as corrugated board, galvanized or colored - depending on the preferences of the buyer and the general design of the summer cottage. The outer surface of the picket fence is protected by a special film, which must be removed after installation on site.

Despite the growing popularity of a metal picket fence, it is not an expensive and easy-to-install type of fence, it is perfect for fencing a summer cottage, in whatever area it is - both for the city and for the village.

Slate fence for summer cottages

Although this is a roofing material, it is very often used for fencing, and such a fence is just right for a summer cottage. Firstly, because of its low cost - if we are not talking about new slate, and secondly, because such a fence is reliable in terms of protection from outsiders.

For the construction of a fence, it is better to take a slate not wavy, but smooth - in this case, it is more convenient to fix it, and it looks much more aesthetically pleasing. It is mounted on frames specially welded for it from a metal corner.

The slate, of course, is convenient because it is not afraid of any weather disasters - neither rain, nor heat, nor frost can spoil its appearance. But on the other hand, as a material with a different main purpose, slate is rather fragile and cannot withstand serious mechanical stress - it is easy to split.

Concrete fence

Popular for being durable and looking good. On sale it is presented in the form of ready-made sections, standard sizes - they can be solid or openwork - everything here depends on the wishes of the buyer. Both solid and openwork sections can have different designs for stone, brick, in the form of flowers, various ornaments and the like. As a rule, usually two or three solid sections are selected, and on top - one openwork - it makes the structure visually light and beautiful.

Custom-made concrete sections are also very common. Almost any design can be made according to your sketch. Concrete fences are made by casting. In this case, a cement mortar is used, with which pre-made forms are filled. To give the finished section greater strength, before pouring liquid concrete into the mold, it is laid with reinforcement of medium diameter, this gives the installed fence additional rigidity and impact resistance.

The installation of concrete sections is carried out using specially made profiled concrete pillars, or ordinary metal pillars or pipes are used - but in this case, the appearance is not as harmonious as in the first version. The sections are horizontally fastened with cement mortar.

The main advantages of concrete fences are:

Strength,
Resistant to weather conditions, they are not afraid of moisture, high or low temperatures, and so on,
The fence does not need maintenance. If desired, it can be painted, but by doing it correctly, the painting procedure can be carried out quite rarely.

The disadvantage, perhaps, can be called the fact that concrete fences are not so easy to install, often, due to their large weight, it may even be necessary to use special equipment.

The main requirement for the construction of a concrete fence is the construction of a high-quality foundation. In another way, concrete sections simply cannot be installed. The foundation must be built strictly according to the level and be perfectly leveled - otherwise, the fence will inevitably collapse and prematurely collapse.

If we talk about more massive concrete fences - monoliths, then they, of course, are even more durable and reliable, but their main drawback with a large weight is their external unattractiveness. Such a fence is more suitable for industrial fencing than for a summer cottage.

This is a fence that can turn your home into a real fortress! - it is not only a spectacular appearance, but also strength, reliability, confidence. The saying “like behind a stone wall” is also relevant in life.

Various types of natural stone are used for the construction of fences:

Booth. Stone quarried from rocks. In nature, there are several of its varieties, which are outwardly different from each other.
Cobblestone. Also natural stone, however, of a relatively low cost. The cobblestone looks rustic due to its gray color, but the fence made of it is quite strong.
Dolomite. It is mined by exploding rocks - a beautiful flat stone.
Limestone. The shell rock is a rather soft type of stone. Its durability is not so great, because this stone absorbs moisture like a sponge, which contributes to its gradual destruction. There are special materials on the market for covering shell and limestone, they protect the stone from external factors.
Sandstone. A popular stone for construction and finishing work, in particular for the construction of fences. Sometimes it is natural and hewn. Durable and frost-resistant in terms of properties.
Granite. Natural stone with the highest durability. Granite structures can serve for hundreds of years without changing their appearance.

Making a stone fence is not particularly problematic. Its main drawback is the cost of the material itself. For such a heavy structure, of course, a solid foundation is required. Completed according to the level, he will be able to serve for a long time.

Stone fences are durable and beautiful, and despite their cost, these fences are worth taking care of.

Brick fence

Stable, beautiful and, one might say, a classic version of the fence. This design is suitable for both a country house and a summer residence. Modern building stores offer bricks of a wide variety of modifications and shades. It can make your fence personal and unique.

A brick fence is also installed on a solid foundation, this is a prerequisite for such a heavy structure. The foundation is best poured with concrete, in which supports for the future fence have already been installed. It is best to use round or square metal pipes as supports.

The fence is laid using a cement-sand mixture. For her, it is desirable to use high-quality cement, grade 400M and sifted river sand.

Brick fences are good because they combine perfectly with other building materials. For example, brickwork does not have to be monolithic, but can be decorated with inserts of forged gratings, colored corrugated board or stone section.

Brick, although not a natural stone, is known for its properties as a durable building material, it is resistant to precipitation, temperature extremes, and with high-quality performance, it will last for many years.

Non-standard solutions for finishing fences for summer cottages

For those who want to attract outside attention to their summer cottage, unusual options for its fencing are suitable. No matter how beautiful a wooden fence is, much more attention will be paid to a fence made of plastic bottles.

These decisions, as a rule, are the fruit of the imagination of the homeowners and are carried out by them, with their own hands. But, if you wish, if there are no suitable ideas, you can find them on the Internet. For the manufacture of fences, you can use, at times, completely unthinkable materials. In particular, old car ramps, hedges, mirror panels, various types of weaving.

Gabions are a separate type of unusual fences - these are fences made of natural stone, laid in special sections, a kind of mesh.

Unusual fences - often not made entirely of building materials, but various types of material processing, originality, brightness - make them more interesting than the highest quality standard fence.

The choice of a fence for a summer residence is a responsible and interesting occupation, it is best to do it with professionals in the construction business, who can prompt and advise, take into account important nuances. When planning the construction of a fence, remember that this structure is installed for more than one year and must be strong, beautiful and durable. And also it is imperative to complement the general style of the country house, to protect it and please its owners with its appearance.

It is very important that at the dacha the eye is pleased not only with the plantings, but also with the surrounding environment. About, and we have already told, it's time to talk about how to make fences for a summer residence with your own hands. Without them, the arrangement of the dacha territory is not complete and therefore it is better to attend to the creation of a strong and good fence. Better yet, it fits into the big picture of what you create on your site.

Do-it-yourself fences for a summer residence

Do not be confused by either the length of the fence or its height. Let's start with the fact that the fence is easy to make with your own hands and quite budget, because if you have the desire and basic knowledge of the "fence theory", then you can safely proceed to the next stage - the choice of materials.

A summer cottage fence can be made from:

wood;
picket fence;
metal profile;
mesh;
yes everything, anything!

You just have to choose what will be more to your liking and will fit into the overall design.

Wooden fence for summer cottages

Wood is one of the best materials. It looks noble, it withstands bad weather perfectly, it can be purchased without problems and with all this it is environmentally friendly.

It is not necessary to purchase an already prepared board. It is enough to get the supplies and leftovers that have accumulated in the backyard and are still suitable for use - for example, ranch fences allow the use of uncut and uneven boards. You only need to dig in the wooden posts along the intended trajectory and nail the boards to them in a horizontal position.

This is a fairly simple and cheap fence for a summer residence, and if you take into account its environmental friendliness, then it is worth giving preference to just such fences.

In addition, depending on the length of the board, you yourself choose its direction, so you can build both a ranch fence and a simple vertical or horizontal fence, which has long proven itself.

To install a wooden fence with your own hands you will need:

timber;
boards;
nails;
hammer;
shovel;
sand.

If desired, cement and bitumen can be added to this list if you want the timber to be installed as stable as possible.

The principle of installing a wooden fence is very simple. You dig holes for the installation of the support bar and fill them with cement or fill them tightly with sand, tamping it down. In this way, the supports will not deform under the load of the boards and become more stable.

Then you just have to nail the boards to the posts. If you want to fasten the boards vertically, then between the supports you will have to stretch and nail two strips, on which the boards will be attached afterwards. If you still want to see a ranch fence on your territory, then it is enough to immediately fix the boards from post to post. More on video Ivana Galkin:

Do not forget only that the tree has its own shelf life and does not like moisture. Therefore, be sure to paint the fence after construction and periodically inspect it for damage in order to repair or replace the board in time.

Picket fence

Picket fences are the most popular of the types of wooden fences. And no wonder, because the picket fence is so easy to install, economical to purchase and beautiful in its finished form.

Before proceeding with the construction, it is necessary to mark the territory where the building will be located, to determine its height and the frequency of installation of the picket fence. Although we install a fence for protection, but if the territory is tightly closed, then you can deprive the plants of light, which will lead to crop failure.

The set of materials for building a picket fence is similar to what we have given above:

beam for supports;
horizontal screed board;
cement;
sand;
nails or screws.

The tools can be different - from a shovel with a hammer to a screwdriver and an electric drill. Only the speed of construction will depend on this, but not the quality of the fence.

First you need to install the pillars, which will become the basis of the fence. Therefore, dig holes for the timber at an equal distance from each other, but no further than the length of the board, which will serve as a screed for us. After that, install the supports and fill them with cement mortar.

While the solution hardens (and this will take at least 3 days), you can proceed to the installation of the sections. To do this, we cut the board to a length sufficient to attach its ends to the support. We place the sections on supports using nails or self-tapping screws and then attach the picket fence to them at an equal distance.

As you can see, the process of building a fence is quite simple and does not require any special building skills - just patience to wait for the solution to harden. Then you can create a fence to your liking.

Well, in order to understand the intricacies of working with a picket fence and its installation, we recommend watching a video master class Andrey Krylov:

Metal profile fence

And yet, despite the beauty and cheapness of the picket fence and wood in general, it has one drawback - such a fence is short-lived and its maximum service life is only 15 years. Therefore, many, wishing to save money, are looking for a more durable, affordable and strong material - a metal profile.

Due to its durability and availability, corrugated board has long been widely used by summer residents. It is used for garden beds, roofing and, of course, for fences.

The metal profile does not have the most aesthetic appearance, therefore, most designers categorically bypass the professional sheet when creating beautiful and original fences. But its availability and ease of use plays into the hands of summer residents, allowing them to make a good fence for a summer residence with their own hands.

The construction of such a fence is not much different from others. You will need all the same support posts and boards for the horizontal screed, on which the profile itself will be attached.

And since the metal profile is still not the most popular material for creating a fence, it is worthwhile to dwell a little on basic requirements for its installation:

The distance between the supports should not exceed 2.5 meters. And it is better to stop at a more frequent, half-meter installation. This is due to the fact that the profiled sheet is flexible enough and will deform under the pressure of the wind, losing its beauty and, most importantly, strength. Therefore, the shorter the sections are, the better the fence will be.
Supports must be immersed in the ground at least 1.5 meters. Despite the flexibility of the metal profile, the sheet itself is quite heavy and requires stable support. Therefore, it is recommended to cement all supports at the base.
It is best to use not a timber as a pillar, but a pipe with a diameter of 6-8 cm and a wall thickness of at least 2 mm, such supports will definitely become a good basis for a stable and strong fence.
It is recommended to use 3 horizontal lugs when mounting the profile - at the top, bottom and in the middle. So the fence will be more resistant to deformation and it is better to keep its shape under any pressure.

And so that you are convinced of the simplicity of building such a fence, we suggest you watch the video master class of the channel Do it yourself 36, where they share with us all the tricks of working with a metal profile:

Fence for giving from a grid

And yet one of the most budgetary options is considered to be a mesh fence. Like any metal product, the mesh perfectly tolerates most natural phenomena. And even rust can be prevented by timely treatment. Therefore, the fences come out of it rather durable.

There are several types of mesh for fences:

Chain-link sold in rolls, treated with polymers to prevent corrosion and can be easily installed between posts without unnecessary partitions,
Corrugated formed from a wire with a cross section of 6-7 mm and bent by a wave. It has a strong weave. And due to it, it keeps its shape well.
Welded, has a smaller wire cross-section than in the case of corrugated, but stronger due to welding. True, using it for a fence will be more expensive than in the case of a chain-link.

A fence made of any mesh can be made in two different ways:

Stretch the canvas around the perimeter and attach to the support posts.
Pull the mesh over the frame, and then assemble the fence from the resulting sections.

Allows you to keep track of pets

Both methods have their own characteristics, so it is impossible to single out one of them as more advantageous or simpler.

So, for example, by simply stretching the mesh from post to post, you will reduce the preparation time for materials. After all, you only need to drive in a support, determine the height of the future fence and stretch the mesh, attaching it to the posts with a wire.

This method is simple and practical if you are short on time and want to make a temporary fence.

And yet it should be borne in mind that for a chain-link mesh, the posts will have to be installed at intervals of 1.5-2 meters, and this will increase the budget for the material. Whereas for a corrugated mesh, a distance of 3-4 meters is sufficient.

But if there are height differences on your site, then this is the only solution if you have chosen the mesh as the material. The sections are already prepared frames from a metal profile, which brings us to the limitation - if they are installed in a downward direction, there will be an open space under the fence, which does not give either safety or aesthetic beauty to the site.

The installation of the sections is easier than stretching the mesh fabric. Ready-made frames are simply attached to pre-installed posts, equipped with the necessary anchors, or even welded to them.

As you can see, the choice of the grid and the method completely depends on your desire to improve the area, the time you have and, of course, the budget allocated for this.

To figure out which material is right for you, you can familiarize yourself with a detailed master class on the selection of materials and installation in a fence.

If you want more clarity and understanding of how to do everything correctly, with the explanations of a seasoned master, then you should watch a video lesson from the channel RemontHelp.com:

The grid itself consists of cells, that is, your site will be clearly visible from the street side. Therefore, it is usually recommended to use this material only between areas so as not to block the planting from light.

Original ideas for a fence in the country from scrap materials

Every practical summer resident will consider it his duty to save as much as possible and use everything that remains from other projects. Therefore, before taking on the construction of a fence with our own hands, we suggest thinking about whether it is worth hurrying to the store for a net or a picket fence? Maybe get along with the materials at hand?

Then let's see what we have accumulated over the entire time of owning a dacha? And is it possible to make decent fences out of this rubbish?

The answer is yes, you can.

And car tires, and, and the covers from them can become a fence or decoration. Moreover, it will be no worse and no more boring than one assembled from high-quality materials.

Tire fence

Let's start with tires, for example. A lot of this good always accumulates, so over time the question arises, where to put them. Recycling costs money, and a fence is also beneficial. The choice is obvious.

Somewhat eclectic

It remains only to fill up the territory well and start installing the tires on top of each other in a checkerboard pattern, as if laying out bricks, or fix them on the previously installed fence from the chain-link mesh.

By the way, if you build a fence from tires according to the principle of a pyramid, then the land in the protruding parts can be used for flower beds, thus creating a whole green wall.

Fence from plastic bottles

Plastic can be considered the ideal material for a fence. After all, it decomposes in at least 60 years, which means that the fence made of it will not suffer from rain or sun. Although bottle plastic is still soft, and its shape at first glance is not suitable for building a fence, many began to give it a chance and misuse it.

To enclose the entire summer cottage with such a "plastic fence", you will need to accumulate a lot of bottles to create a full-fledged fence.

The small weight of the material makes it easily deformable from physical damage. In addition, if you have accumulated mostly transparent bottles, then such a fence will not provide protection from prying eyes. But the cost of the finished hedge will be small.

If you combine bottles of different colors, then you can collect whole mosaics. Therefore, creative individuals agree to endure flaws for the sake of an original fence that attracts the attention of passers-by.

To create a full-fledged fence from plastic bottles, it is recommended to take the same size of material. And it can already be assembled into a wall, stringing it on a wire, like a curtain, or putting it on top of each other, filling the voids with cement mortar. The outcome will depend entirely on your desire to strengthen the fence or make it more airy.

By the way, bottle caps will also be used. After all, you can make a movable fence of them, and even with any pattern.

This will require many 4-hole drilled covers and meters of wire. Based on the colors that you have, choose a pattern, or better a scheme for embroidery with beads, and then just string the covers in order, as in embroidery, in rows. Then pass the wire through the vertical holes, thus connecting the rows.

If you are just bored with the old fence, and you still want to put the lids into operation, then just screw them on with self-tapping screws, creating a bright picture-panel on the fence. And now you already have an interesting wall on the site, attracting the attention of kids and pleasing your eyes.

A master class from Soloremont.

However, an ordinary picket fence or an old picket fence can simply be painted in an original way.

Funny pencils

You yourself create a mood for yourself and a desire to visit the country more often!

Do-it-yourself wattle fence in the country: a master class for lovers of rural romance

And if you have ever seen a Ukrainian farm or met huts in the south of Russia, then your heart could not remain indifferent to this peaceful romance. And not even these cute, like toy houses, with a thatched roof and whitewashed walls, sink into the soul, but a wicker fence with earthen bottom hanging from it.

And yet, in addition to the decorative component, the wattle fence is an excellent solution even for a modern dacha. Such a fence will not be inferior in strength to either wood or metal. And in terms of beauty and attractiveness, it will take the first place among them.

And from the point of view of economy, it fits well into our criteria. After all, weaving such a fence will allow you to realize your creative part, and it will also save your budget.

Flowers are clearly visible

But first, it's worth preparing the material:

timber or logs as a support and basis for weaving;
material for weaving (preference is given to willow twigs, although twigs of other trees are also suitable, the main condition is their plasticity);
gloves;
shovel;
sand.

If you are going to weave on already hammered posts, then first dig them in and cover them with sand, tamp them. After that, you can proceed to the rods themselves. It is necessary to steam the rods so that they become more plastic and do not break when deformed.

You can weave in different ways:

horizontally skipping the rods with a figure eight between the pillars. This method was borrowed from weavers;
vertically, between horizontally located lags. Such weaving comes out more decorative than practical. That is why it is used for fences between adjacent sites, but not external;
diagonally, forming the original wood mesh. This type of weaving is the most laborious, since the rods must be long so that the fence comes out at least of medium height. In addition, each rod is recommended to be dug into the ground for greater stability.

To understand the intricacies of simple weaving and try to make your first wattle fence, we recommend that you look at the video tutorial Oleg Bryukhanov where he shares the secrets of creating a simple yet beautiful fence.

If you prefer a fence made of sections, then a master class will come in handy. Yura Kulakevich where he shows you how to create a vine based wattle.

As you can see, the fence is not just a protective structure that hides the summer cottage from prying eyes, lovers of someone else's harvest and stray dogs. A self-made fence is also a decoration of the territory, allowing you to enjoy every day spent in nature, among the plants we have planted with great love.

November 7, 2017 / / here

Private house or cottage - comfort, home coziness, fresh air, fruits and vegetables, flowers and trees. It is with these words that a house on a private land plot is associated, because it is here that you can relax with the whole family, relax, protect yourself from the bustle of the city and be alone with nature. However, in order to create the necessary comfort and protect yourself from all external factors, you need to take care of the fencing of the private territory, in particular for your own safety.

Country houses are buildings for seasonal recreation, as most of the time is spent here in warm seasons. Therefore, an expensive fence will be inappropriate here and preference is given to the practicality and functionality of the building.

In order to protect a land plot, it is not necessary to use expensive materials, because minimalism is welcomed in 2018 in all its manifestations. Now designers are ready to offer a lot of interesting ideas and options for the buyer's choice that can make even an inexpensive fence very high quality and reliable. At the same time, the fence can be both beautiful and original at the same time. With all this, it must be borne in mind that the main functional purpose of the fence is to protect the land plot and its private territory from external factors, not invited guests.

It is worth noting that it is much cheaper to install fences, the design of which is attached to the supporting pillars; a fence mounted on a strip foundation will cost much more.

Types of materials

Ideal inexpensive building materials to build a reliable fence:

Picket fence made of wood or metal.
Wood - boards or beams.
Rods.
Mesh - corrugated, chain-link or welded.
Decking.

In general, the choice is great, and what kind of material to use is decided on an individual basis, depending on the tastes and preferences of the owners. Most often, it is wooden fences made of picket fences, rods, beams or uncut boards are used. The main plus of the fence is that it is easy to build it yourself.

Wood fence

By making a wooden fence in an original way, using different configurations, you can create a stylish and beautiful fence for a private plot.

Advantages of a wooden fence:

Versatility - such a fence can perfectly fit into any design and landscape.
Ease of maintenance - it is enough to regularly paint the fence and fix its defects.
Ease of installation - it is easy to put a wooden fence in your private area, everyone can cope with it.
High level of reliability.
Possibility of various equipment and decoration of the fence.

Private sector fence

The cheapest fence option. However, this does not mean that it cannot be interesting - by using the design imagination correctly, you can make an excellent fence in a rustic style.

Making a wattle fence is easy and simple. Confirmation of this is that it is the wicker fence that is one of the most ancient. Regardless, in 2018 it regains popularity and takes the lead as a stylish defensive redoubt to decorate its garden.

Depending on the height of the fence, it is divided into three types, each of which is used, depending on its functional application:

Up to a meter - for fencing a flower bed.
About one and a half meters - for zoning the site.
A high two-meter wattle fence is a fence for fencing a private plot along its perimeter.

A fence made of timber or boards

The cost of such a fence is low, however, it has a number of advantages:

Easy installation process.
Low price.
Interesting and attractive appearance.
Easy to maintain.
Long service life.

Uncut type boards - wood with an edge that is partially sawn off or was not sawed at all. It is best to use hardwood and conifers for the fence. When purchasing boards, you need to take into account some of the nuances:

Structure - knots should be avoided.
Cracks - they are not acceptable, they appear with poor drying.
Cut quality - the board must be flat and smooth.
Correctness of installation - if everything is done well, then this is high-quality protection for many years.

Rabitz

Chain-link fences are a fairly common occurrence, since they are inexpensive. In addition, corrugated or welded mesh can be used, which are very common in villages and are widely used as fencing for summer cottages.

This type of fence is a little more expensive than others, but the duration of its operation is much higher. Having installed such a fence, you don't have to worry about its quality for the next 10-20 years.

A fence made of such a mesh is stretched between the posts located at a short distance from each other and copes well with the influence of external factors. It is also worth noting that it transmits light rays well, which is important for the land plot, especially the part where the vegetable garden or front garden is located.

A mesh-type fence always looks interesting and original, and if you somehow decorate it, you can create an interesting fence. It is also very beautiful when plants or flowers curl along such a net. In total, there are two types of installation: sectional and tension.

Fencing made of metal or corrugated board

Metal and corrugated board is another option for building a fence around the private sector. The only difference between the two is appearance. A metal picket fence looks like an ordinary wooden fence, but the corrugated board is a solid fence that will not allow unauthorized persons to "throw their eyes" into the territory of the private sector, which means you can feel safe.

The main advantage of all materials is the possibility of self-installation. By connecting imagination, you can create an original, interesting and attractive fence. If you decorate it correctly and use modern ideas, then the design solution can surprise neighbors and passers-by. Which fence to install in 2018, everyone decides for himself. The main thing is not to restrain yourself in design ideas and bring ideas to life.

2017-11-07 02:47:09 Fence at their summer cottage: 100 original ideas

A fence is a mandatory attribute of any site. Its function is both to protect the site from the influence of strangers, and to decorate the house. In addition, the fence is necessary for surveying and dividing the land into zones.

In this article we will talk about how to make a beautiful and, at the same time, affordable fence.

Building materials

Undoubtedly, fences made of stone, brick, corrugated board or wood are especially popular, but these materials are not budgetary and not everyone can afford such a fence.

A cheap, at first glance, fence made of a chain-link or welded mesh will also hit the family budget, given the cost of transportation and installation of the fence. Despite this, the fence is still the face of the site, so you should not save on it.

There are many ideas about what you can make a fence from. If you nevertheless decide not to spend money on an expensive fence, then take note of the options for a fence made from scrap materials, such as:

Unnecessary pallets.
Used slate.
Various plastic parts such as old containers.
Production grid.
Waste from the sawmill.
Branches of bushes and trees.
Raw boards.
Scrap metal. If you have a car, you can visit scrap metal warehouses and purchase pipes, poles and crossbars there.
Used brick, stone and concrete.

Stages of construction

How to build a fence with your own hands? So, the construction of the fence takes place in several stages:

Layout and markup. Before starting work, it is necessary to draw up a drawing of the fence indicating its dimensions and the location of the gate and wicket. Then we transfer the drawing to the construction site.

The boundaries of the future fence must be marked with pegs and a string between them. Additionally, with the help of pegs, you need to indicate the location of the support pillars. The distance between them should be 2 to 3 meters.

Foundation. If you are building a stone or brick fence, then keep in mind that such a massive structure requires a solid foundation. The approximate depth of the trench for the foundation is 70 centimeters, and the width is 40.

Installation of support pillars. Fence spans masonry.

Having familiarized yourself in more detail with the stages of building a fence, you will know exactly how to make a fence correctly.

Fence made of corrugated board

A fence made of such material as profiled flooring will favorably emphasize and highlight your site among others and will reliably protect it from strangers. How to make a fence from corrugated board?

Installation of a corrugated fence does not cause difficulties even for beginners. The installation of such a fence is fully justified due to the advantages:

Simplicity of technological work during installation.
The strength of the material.
Long service life.
Modern style.

A self-made fence made of corrugated board is an ideal option for a personal plot.

Fence for a summer cottage

You can make a fence in the country from such a popular material as mesh. Currently, there are many different types of mesh, for example, chain-link mesh, welded mesh.

In addition, modern production technologies provide for various protective materials with which the mesh is processed. Thanks to this measure, the mesh fencing can serve for about 50 years.

Among the advantages of this type of fence are low price, transparency, ease of installation and ease of transportation.

In some cases, transparency can be attributed to the disadvantages of the material, since sometimes we want to completely hide from prying eyes.

Price

The price of the issue when building a fence depends on many factors. Here is some of them:

Foundation dimensions. The amount of mortar that will be used for construction depends on this parameter. Accordingly, the heavier the fence, the more massive the foundation must be laid.
The size of the fence.
Material for construction.
Mounting. You can save a lot on installing a fence if you decide to build it yourself, without the help of specialists.