Do-it-yourself flash fireplace from boxes. Do-it-yourself fireplace from boxes: step-by-step New Year's instructions. DIY decorative fireplace from cardboard boxes

If there is a great desire, minimal construction skills and creativity, then making a fireplace portal from various materials with your own hands will not be difficult. When there is no need to install a classic wood-burning fireplace, then a decorative one will become the most acceptable alternative both materially and aesthetically.

Various materials can be used for artificial foci:

• drywall;
• wood;
• polyurethane;
• brick;
• plastic;
• carton boxes.

No matter how incredible it may sound, a decorative fireplace portal from cardboard boxes can really be made. This will be the most budgetary, but no less beautiful option. The only drawback of the design is its strength, since the starting material tends to sag, bend, and deform with minor impacts.

A cardboard fireplace can be left without imitation of fire, and decorative or natural stones, firewood, decorative items can be placed inside the proposed firebox, candles can be put, but in this case, during their burning, do not leave the hearth unattended.

Also, a gas furnace and a biofuel burner cannot be installed in such a structure, since cardboard is a highly flammable material and contact with open fire must be limited. But the electric screen will be the most acceptable option.

Modern models are able to recreate the most realistic picture of fire, in dynamics, that is, the flames will move. The screen is controlled by a remote control, which greatly simplifies its operation. It is clear that there can be no talk of the heating effect of such a fireplace, due to the low fire safety.

Necessary materials

In order to make decorative fireplaces from cardboard boxes, you need to decide on the place of its installation, make a drawing yourself or use this master class. The next step is the preparation of materials. In order to make a cardboard fireplace with your own hands, you will need boxes. The ideal option would be a flat-screen TV box with a large diagonal, but if there is no one solid box, you can use different pieces of cardboard, only they must first be fastened together.

New Year's fireplace from boxes

Since such material is not durable, you can install metal profiles in the inner corners - stiffeners, they will help strengthen the structure of the fireplace made of cardboard.

• stationery knife;
• polymer glue;
• masking tape;
• construction trowel;
• pencil;
• ruler.

And also additional materials:

• polyurethane curbs;
• gypsum stucco molding;
• corners;
• moldings;
• putty.

These will be decorative elements, so their choice depends entirely on personal preferences and the general style, which corresponds to the fireplace portal made of cardboard boxes.

Workshop on making a wall-mounted version of a decorative fireplace from boxes

First you need to transfer, using a ruler and a pencil, the scheme of the future fireplace to a cardboard box. Then, armed with a clerical knife, cut out the necessary elements - a firebox in the center of the structure. Bend the cut edges inward and glue them to the back wall, thus creating a niche.

In the center of the upper side squares, you can place decorative elements of plaster molding - flowers, angels, pigeons, other figures - there is no limit to imagination.

A fireplace portal made of cardboard boxes can be made with a lid in the form of a shelf, in which case it is advisable to additionally strengthen the structure with foam or several cardboard sheets. They need to be fastened securely together with glue. Glue a wide ceiling plinth on top and sides of the future shelf.

So that the joints do not stand out (they are usually uneven), it is necessary to paste over all the corners with mounting tape.

At the next stage, the master class involves decorative finishing. It can be done using water-based paint, but it is still better to pre-putty the entire surface with a drywall solution. After that, let it stand for a day, in order for the putty to dry, and start decorating. You can use white water-based paint or any other, depending on the interior style of the room. The paint must also dry and can be cured with a layer of varnish.

If the room is made in a classic style, Provence or Empire, then the fireplace can be made vintage - artificially aging the material. This effect is easy to achieve if you apply a thicker layer of putty, and then dry it with a hairdryer - small cracks will appear. You can use two types of paints: apply a darker one on the bottom, a light one on top, and rub in some places with sandpaper.

It is worth noting that the same procedure for assembling the structure can be used in order to make a foam fireplace.

Corner fireplace from boxes

When the room is small, you can make a corner fireplace from boxes. First you need to decide on the place where it will be installed. If one of the adjacent walls is the side of the cabinet, then it is necessary to calculate the dimensions so that the finished structure is flush with the cabinet and does not protrude.

This master class involves the use of such materials:

• cardboard;
• glue;
• assembly tape;
• metallic profile;
• construction film of two types - under a brick and under a tree.

Stages of work

• glue the cardboard in the shape of a triangle, according to the required dimensions;
• cut a hole in the center to simulate a rectangular firebox, from above it can be made semicircular;
• for strength inside, install stiffeners;
• all joints and corners must be pasted over with mounting tape to hide irregularities;
• paste over the portal of the fireplace made of cardboard with a construction film that imitates a brick or stone;
• form a shelf cover from cardboard sheets, they must be tightly fastened together;
• cover the shelf with a film imitating a tree;
• install a ready-made cardboard fireplace in the room;
• place candles, decorative or real stones, firewood, and other elements in the firebox.

This completes the master class on making a decorative fireplace from cardboard boxes. You can admire the result. But it is worth remembering about safety - if you light candles inside, then do not leave them burning unattended.

Video: How to make a fireplace out of cardboard

Reading time ≈ 8 minutes

New Year's holidays are just around the corner, which means it's time to think about creating the appropriate mood. In this case, a fireplace will help us, but how to make it out of the box with your own hands for the new year 2020 with step-by-step instructions and photo examples, we will figure it out in more detail.

Styles of decorative fireplaces

The manufacture of a false fireplace is possible in one of the following styles:

Calculation of parts and pattern

The photo shows the standard size of the hearth, which can be taken as a basis when assembling a New Year's fireplace. However, this does not mean at all that you cannot make changes, add something of your own. The design parameters are determined by the place of installation, the number and size of the boxes used.

The fireplace can be assembled both wall-mounted and corner.

If the box is large, mark the size of the firebox with a pen and a ruler, cut the cardboard with a knife and bend it in the right places. When using small boxes, they can be tied together with adhesive tape, giving the product the desired shape.

Raised fireplace trim

An important role in the manufacture of a hearth from cardboard boxes is played by its decoration. Basically, such products are covered with materials that imitate brick. The decor can be made either from red paper or painted with paint according to a template.

A convenient option for obtaining a beautiful finish is to use wallpaper for a brick or plaster.

Masonry can also be made of thin foam, which requires cutting the material into pieces of the desired size. As a result, the finished structure will be white.

Another option for finishing a fireplace is a laminate underlay, for example, beige, which is good for the purposes in question.

To decorate the fireplace, rectangles are cut from the substrate and pasted over the workpiece.

The easiest way to finish is to paste over the fireplace with white paper or cover the cardboard with water-based emulsion.

How to simulate a fire in a fireplace

Not a single hearth, even a decorative one, is complete without fire.

When using a fireplace made of cardboard, do not forget about safety precautions - you cannot use candles inside a structure with an open fire. All lighting elements must operate exclusively on batteries or mains.

Consider the options for adding fire to the fireplace:

• draw a fire on cardboard, cut and paste it into the firebox;
• place LED candles in the hearth;
• use garlands and strips with LED elements;
• decorate the firebox with New Year's decor, for example, balls.

How to make logs

To make the fireplace look like a real one, you can add logs to it. For these purposes, both real small birch logs and artificial ones are suitable. If you do not want to search for material for logs, you can make them yourself.

For this you will need:

• corrugated cardboard;
• glue;
• knife and scissors;
• gouache paint and brush;
• twine.

The procedure for making logs is as follows:

The best ideas for Christmas fireplaces from boxes

Artificial foci come in different shapes and sizes. We will consider some options step by step.

Christmas fireplace

For the manufacture of the product in question, the following tools and materials are needed:

• cardboard boxes;
• ruler;
• pencil;
• White paint;
• brush;
• golden acrylic paint;
• construction tape;
• small nails;
• new year accessories.

Having prepared everything you need, we perform the following steps:

1. In the center of the box we mark directly the fireplace insert.
   
2. We cut the cardboard from the sides and from the top.
   
3. To make the cardboard bend well, we push through the corner of the ruler from the bottom of the marking. We repeat this procedure several times and give the blank a shape.
   
   
4. We bend the cardboard inward and fix it with tape.
   
5. Using another box, we cut out two blanks of the same size: they will serve as the walls of the future fireplace.
   
6. We fasten the blanks with tape in such a way as to form the fireplace insert. Then we paint our product with white paint and leave it to dry completely.
   
7. We decorate the fireplace by applying a brick pattern.
   
8. We fix the garland and tinsel to the product with small carnations.
   

Brick fireplace

To make the fireplace similar to the real one, you can use a self-adhesive film as a material that will imitate brickwork. First, we prepare:

• carton boxes;
• self-adhesive;
• Scotch;
• glue;
• metal ruler;
• scissors.

A master class for a brick fireplace consists of the following step-by-step actions:

1. We cut the box into two parts.
   
2. We push the blanks so that the cardboard can be bent.
   
3. We prepare the self-adhesive.
   
4. We cut off the decorative film with a margin so that the edges go to the back side of the cardboard.
   
5. We glue the decorative film. If self-adhesive is used, then you need to apply it a little in tightness, gently smoothing and removing bubbles.
   
6. We connect the blanks with tape and glue them with decor. If the length of the film is not enough, you can fasten it in short pieces, since this will not be noticeable.
   
7. Cut out and paste over the rest of the elements. The result should be a center piece, two corners and a top.
   
8. We fold the parts in such a way that a firebox is formed, after which we glue them with tape.
   
9. We also glue the top with tape. We use socks and garlands to decorate the product.
   

From the video you can learn how to make a hearth out of cardboard boxes.

Corner false fireplace

If the room that you intend to decorate is small, you can make a fireplace from corner-type cardboard. Thus, it will be possible to update the furnishings and get a shelf. We need the following list:

• box;
• ruler;
• pencil;
• Scotch;
• decor.

Consider the step-by-step instructions for making a cardboard fireplace for the New Year with your own hands:

Trapezoidal fireplace

How to make an unusual trapezoidal fireplace out of the box with your own hands for the New Year 2020, we will consider in more detail in the step-by-step instructions with photo examples:

A decorative fireplace from boxes with your own hands will help create a romantic atmosphere in the house, a good mood in winter and coziness all year round. Step-by-step instructions will help you not to start "dirty" work in the house, dilute cement and disassemble the roof under the chimney. A fireplace can be created in one evening and from scrap materials. So, we turn on the imagination, involve children in the work and start creating with our own hands.

How to make a fireplace out of cardboard boxes

To build such a fireplace, we need:

To prevent the boxes from opening, we glue all the joints with tape. According to the drawing in the figure, we collect the basis of the future fireplace. We glue the boxes that will make up the parts of the fireplace with tape together. For the side racks, we use smaller boxes stacked on top of each other. We make the base of the fireplace and the upper mantelpiece from larger boxes, connected end-to-end by short sides.

We glue each detail of the fireplace with thick paper or old wallpaper. The boxes must be completely covered with paper. We connect the edges of the paper with tape. Now we glue the parts of the fireplace with PVA glue together. The product is ready, it remains to arrange it.

To decorate the fireplace, we use wallpaper with a brick pattern or sheets of thick cardboard. Four "bricks" can be cut from one sheet of cardboard. We paste over the fireplace with wallpaper, giving the appearance of brickwork. If "bricks" cut from cardboard are used, we glue them on the surface of the boxes, creating rows of bricks, and leaving gaps between the bricks, so that it looks as close as possible to natural masonry.

For gluing "bricks" we use PVA glue. The back wall of the fireplace, adjacent to the wall, need not be pasted over. If the cardboard is white, paint it with paints of the appropriate shades - from sandy yellow to dark red.

Read the article: Wood burning stove for home

The fireplace is ready, we will install it in the prepared place in the room, against the wall. We will put the decor on the mantelpiece; we can put natural logs or their imitation into the hole for the firewood. Here we focus on our imagination.

Exquisite decorative fireplace from a large box

We will prepare materials for creating a fireplace. To do this, you need a large cardboard TV box. You can take thick cardboard instead of a large box. But, then you need to be prepared for the fact that it will have to be cut and glued.

You will also find it useful for making a decorative fireplace:

We transfer the drawing to the box from under the TV. Cut out a hole in the middle of the box according to the drawing. This will be the "hearth". Bend the cut edges and glue them to the back wall of the box. If cardboard is used, we cut the sheets according to the drawing, taking into account the adhesion tolerances. We connect them together with glue.
To make the top of the fireplace, take a sheet of styrofoam or plywood, or glue a few sheets of cardboard together. Glue the resulting mantel to the fireplace itself.

To keep the fireplace stable, it is better to glue an additional sheet of cardboard or plywood onto the base. In a hardware store, we will buy a foam plastic ceiling cornice and a couple of decorative elements - foam pylons or rosettes. They will add sophistication and grace to our hearth. We will glue the decor to the fireplace. For this we use PVA glue or liquid nails.

We paint the fireplace in two layers with balloon paint of white or other pastel color. To avoid ruining the flooring, place old newspapers or paper on the floor. After painting, let the product dry and install the fireplace. The decorative fireplace is ready.

Firewood for the hearth can be made from cardboard twisted in the form of logs or natural branches can be used. If the fireplace is conceived in one color, paint the firewood with the same paint. You can also place candles in tall glass glasses or an electric garland in the recess of the hearth. Decorating a mantel also leaves room for creativity. Photos in beautiful frames, paintings or flower arrangements and memorable gifts in bright packaging will look great on a mantelpiece.

Photo of a decorative fireplace out of the box

It is very easy to create beauty and coziness in the house with your own hands. Imagine and create, then you can make a decorative fireplace from the boxes with your own hands using step-by-step instructions in the shortest possible time. Your apartment can be decorated with simple decorative items with minimal cost. To do this, it is enough to spend a little time and effort.

We will send the material to you by e-mail

Have poop and warmth you always want, regardless of whether it is a city apartment or a country house. Especially the desire to create a hearth in the house appears when there is snow and a blizzard outside the window. And what could be better than your own fireplace in the house? If you remember such a desire in the summer, then it is quite possible for residents of a country house to equip it, but the population of high-rise buildings can only dream of it. We have a way out: a less costly and no less spectacular do-it-yourself cardboard fireplace (step-by-step instructions are attached). If you are interested in this solution, then go ahead ... behind a large cardboard box. What else is needed, and how to do it, now we will tell and show.

The key and most important thing, without which it will not be possible to create a fireplace with your own hands, even with the most detailed instructions, is a large cardboard box. It can be from a TV, refrigerator, or even fit from. The main thing is that it meets the following requirements:

• Strong packing cardboard. It has the necessary rigidity, which will allow you to apply finishing to the future fireplace and make the upper shelf.
• Have a large size so that there is room for imagination. If there is no very large box, then you will have to confine yourself to a laconic corner fireplace, for this you can take a smaller one.
• The box should be unnecessary. For example, you just bought a refrigerator, then do not rush to use cardboard for a good cause, because when problems arise with the device, they will not be accepted for warranty without the factory packaging, and if they do, it will probably be inconvenient to transport it.

In addition, you will need the following assistants: masking tape, glue gun, paint primer, stationery knife, ruler, paint brush, sponge for application, acrylic paint, spatula (not wide). These are the basic materials. If you are planning an additional one, then for these purposes you can use, depending on the project of the fireplace: polystyrene, drywall, plinths and borders (decorative from expanded polystyrene), mosaic or any other, grout for tiles, varnish. For the convenience of cutting all this, a grinder or a jigsaw.

Cardboard is convenient because it can be used to make a structure of almost any shape

Before starting work

Before you start making a fireplace out of cardboard with your own hands, the step-by-step instructions of which are already there, you need to develop a design for a future fireplace, since even the most skillful hands will not go out of fancy and you need to rely on something before making a fireplace with your own hands from cardboard ...

The development of the project includes marking the dimensions of the future product in accordance with the possibilities of its placement, while the following factors must be taken into account:

• If there is not enough space, and there is a free corner, then a small false fireplace with corner placement would be an excellent option.

Having received information about the free space, you can develop a fireplace layout. On a sheet of paper, it is worth drawing on a scale the height, width, depth of the furnace and its shape. After such detailing, you can start working in kind with our box.

Helpful advice! If you cannot find a large box, use several small ones, gluing them together in the form of an arch-portal.

Fireplace frame

Now comes the most crucial moment: you need to make markings on the box and cut out the components of the future fireplace. The final appearance of the fireplace will depend on the accuracy of the work at this stage. Therefore, work carefully, clearly and accurately.

Lay the box on the floor and mark the future firebox and the necessary bending points. In order not to get confused, mark the cut line in one color, and the bend in another. In order for the cardboard to bend where it is needed, it is necessary to cut through only the top layer, that is, the paper that covers the corrugated insides. Such manipulation will allow you to clearly draw the contours of the future fireplace.

Next, we proceed to cutting the firebox. Regardless of which shape you choose for it, the steps to shape it are the same. First, cut out the window, then bend its lower part inward - this will be the bottom of the firebox. Next, you need to organize the back wall and sides. For the back wall, cut out a figure identical in shape from such cardboard, but it needs to be made a little larger, about 5 cm of allowances will be enough, in order to get comfortable, glue it. We do the same with the sidewalls. Then we collect all this. You can fasten it either with a glue gun, or scotch tape, or a stapler, but always from the inside out. If you plan to organize shelves and niches, then the stage of forming the firebox should be postponed. And to carry it out after the manufacture of shelves, which are made according to the same scheme as the firebox.

After all the niches are ready, you need to be puzzled by strengthening the structure. For this you need:

• Place cardboard, polystyrene or other lightweight but durable material under the firebox and shelves that would withstand the weight of what is supposed to be placed in the niches.
• In places of possible deformation (at bends), fix the cardboard rolled into a tube: it will give a stable shape to the structure.

Useful information! For the durability and reliability of the structure, it is best to use drywall or. However, these materials suggest some skills, and for the gypsum board you will also need the construction of a metal frame.

Adjustment

If you made a fireplace out of cardboard with your own hands, the step-by-step instructions of which you had, but there are irregularities and other shortcomings, then they need to be corrected. Putty will come to help us. But here you need to work carefully. After all, cardboard absorbs moisture, so you need to apply it in parts and on small areas, the second layer only after the previous one has completely dried. There is a little trick that will help out if the disadvantages are minimal. Glue the usual rough shepherd on the irregularities - it sticks well to the cardboard, and the finishing putty fits just fine on it.

Lid

There is not a single fireplace without a cover, and ours is no exception. You need to make it from any dense and light material. For example, thick foam. First, you need to make recesses in it so that the lid fits into place. That is, it fixed the position of the fireplace. Before fixing it with glue, you need to try on and check the conformity of all the protrusions. If all is well, you can fix it. At the joints, you need to putty.

Finishing

The last step will be finishing. First you need to apply the finishing putty with a spatula, and then let your imagination go free. You can decorate the fireplace with foam borders, which are used on the ceiling. Or make it from expanded polystyrene and paint it accordingly, you can apply an ornamental pattern and much more. It is better to lay out the lid with tiles, or glue it over with wooden clapboard. The final step will be to varnish all this splendor in order to fix the decor and give it a complete look.

The fireplace in the house is a symbol of comfort and warmth. A fireplace made of stone is not even in every private house, and the owners of a standard apartment do not even have to dream about it. And you must always dream. If you cannot lay out a real fireplace, then even a housewife can make an imitation of it. Such a simple and affordable material as cardboard will come to the rescue.

For manufacturing, you will need unnecessary boxes, glue, scissors and imagination. Various unnecessary leftovers of colored paper, polystyrene and other materials that can be found in the house are suitable for decor.

Sketch of the future hearth

Before planning the manufacture of a cardboard fireplace, it is necessary to study the experience of those who have already made the idea a reality.

Planning:

• Determination of the place for the future construction. An empty corner or wall is most suitable.
• Depending on the availability of free space, the dimensions of the structure are determined.
• Making a sketch. It must be marked with external and internal dimensions. The sketch can be done in color, complementing it with the intended decor elements. You don't need to draw these elements, you just need to define the places for them. Such a fireplace layout will allow you to see the future product in a finished version.

Thinking over the decorative details, we must strive to ensure that in the end the layout is as similar as possible to a real fireplace.

Manufacturing process

The basis of the fireplace structure will be a cardboard frame. For its construction, it is best to use thick cardboard boxes. Corrugated cardboard for packaging large household items will be the most suitable. If the packaging from the TV is preserved, then the ideal frame is already ready.

In addition to cardboard, you need to prepare:

• Stationery and polymer glue, which will be used to attach decorative elements.
• Wide tape, it is better to take a double-sided painting.
• White paint. Dispersion will be the most suitable for coloring cardboard.
• You will need scissors and a cutter as a cutting tool.
• Paint brushes and foam or sponge.
• Old cloth napkins or scraps of cloth.

Other materials should be considered, depending on the idea. For example, stucco molding made of foam material. If there is a remnant of liquid wallpaper, then there is a use for them to create volume.

How to make a fireplace from cardboard?

The assembly of a false fireplace begins with the manufacture of the central unit. First you need to form the columns. To do this, you need to cut out the rectangular pieces in accordance with the dimensions.

It must be remembered that cutting cardboard is not difficult, but making even folds on it is more difficult work. In order to make an even fold, you will need a flat bar or ruler and an object to secure the fold. For this purpose, it will be quite convenient to use a regular spoon or pen.

The ruler is applied along the fold line, the cardboard is carefully folded along the ruler and a line is drawn from the back side. This must be done carefully so that the fragile cardboard does not break through.

The central part is pasted over with paper or painted immediately. After assembly, these actions will be problematic.

The finished parts are assembled with scotch tape. As mentioned above, it is convenient to use double-sided tape for these purposes.

In order for the product to be evenly painted over, you can apply a white primer before applying the paint. A layer of primer will help smooth out any unevenness. After the cardboard absorbs the applied primer and dries well, you can start painting.

An obligatory fireplace attribute is a shelf on top. It should be tight and firm. To make a shelf, you will need to roll cardboard in three or four layers - this will ensure the required rigidity.

As an alternative to cardboard for the shelf, you can cut a strip of non-thick plywood. Another dean version of the shelf is polystyrene. The material is lightweight and durable. Such a shelf will also allow you to hold the fireplace frame together.

Finishing options

An interesting option is imitation of brick or stone masonry. To do this, you can pick up a self-adhesive film. In building supermarkets, such materials are sold. You just need to calculate the size of the canvas and select the desired pattern in the store.

If you decorate the product with stucco molding, the fireplace will look more interesting. For these purposes, use the remains of ceiling tiles, foam baseboards or buy additional molded products.

If desired, the fireplace can be decorated with additional elements. For example, a New Year's fireplace can be supplemented with LED lamps that simulate candles.

And, finally, the most important thing that allows us to call the fireplace a home is the fire. A few logs wrapped in LED strip will make the hearth look almost real. And on New Year's Eve, the flickering light of the fireplace will add coziness and a festive mood to the room.

So, a simple and affordable, financially not burdensome option for building a hearth is outlined. We can say that this is a basic instruction on how to make a decorative fireplace. The basis is there, and the decoration with decorative elements is performed by each according to his own taste.

Photo of a cardboard fireplace with your own hands