How to connect a wall sconce with a switch diagram. How to install and connect a wall light. Connecting a sconce with a cord

The advantage of these lamps is that they emit a diffused, not bright luminous flux, which can be used to illuminate a certain part of the room. They are often used as bedside lamps in the bedroom. you can read your favorite book without distracting the person sleeping next to you. Now we will look at the main methods of installing and connecting a sconce to the network with our own hands.

Another important advantage of the products is the ability to adjust the angle of incidence of light. The design includes a rotating lamp holder, which allows you to direct the light flux to a specific area. In addition, the lamps complement the interior of the rooms, due to the fact that they can be made of beautiful plastic, forged metal and even crystal.

Today there are sconces with a rope switch, as well as those powered by a keyboard model. Next, we will look at the specifics of installing and connecting to the network for each of the options.

Connection methods

Rope model

If the sconce lamp has a rope switch, then it will not be difficult to install the product.

First you need to bring the wires to the connection point. Usually not standardized and ranges from 1 to 2 meters. It is recommended to lay the cable in a hidden way so as not to spoil the interior of the room. At the output, you should have 3 wires: ground, phase and zero. Marking N means that the wire is neutral, L - phase, PE - ground. The lanyard switch is easier to connect, all you need is to make contacts to the terminal blocks and fix according to the diagram. In order not to make mistakes, we recommend that you familiarize yourself with. Phase should be connected to phase, zero to zero, and earth to ground.

Video tutorial on connecting the product

Keyboard model

Alternative - keyboard. Very often, the design of the sconce is arranged so that instead of a rope or a chain, only contacts are left that need to be connected independently. There is nothing complicated here, the main thing is to do it at the stage or at home. This is due to the fact that during electrical work in a hidden way, it will be necessary to hammer grooves for the switch and cable laying.

So, the installation diagram is as follows: the input phase from the network should go to the switch, and from it back to the luminaire (so that the circuit can be disconnected). Zero and ground are connected directly.

To your attention do-it-yourself illustrative diagrams for connecting a wall sconce:

Please note that in some (especially Chinese) products, the colors of the wires may be the same. In this case, it is recommended for yourself to mark each contact with colored cambric. This will make repairs and maintenance safe.

Cord with plug

There is another way to connect the sconce to the network - with an electric wire with a plug. In this case, the wires from the luminaire must be connected to a regular cord, which will be connected to the outlet with a plug. The advantage of this option is that you can do without wall chasing and additional installation of a switch. In addition, a cord can be added to the chain, which will break the chain so as not to constantly pull the plug from the outlet.

The main process

So, we figured out the methods of connecting the wires, now we will consider the instructions for installing the sconce on the wall.

In order to independently connect the sconce to the 220 Volt network, you must prepare the following tools and materials:

a drill with a set of drills (if carried out, then the drills should be "wood-cut", for concrete walls buy drills of the appropriate type);
dowel-nails;
a set of screwdrivers, including indicator;
ladder;
pliers;
a sharp knife or a special one;
simple pencil.

To your attention, step-by-step photo instructions for installing a sconce with three lamps:

We turn off to de-energize the room.
We check the voltage on the contacts to which we will connect the sconce. For this we use an indicator screwdriver.
We attach the back cover to the installation site and use a simple pencil to mark the holes for the mount. Make sure that the cover is latched straight.
We drill holes at the marked points and fix the cover with dowel nails.
Using a knife, we clean the input contacts by 5-7 mm for the connection with the terminal block.
We fix the cores in accordance with the diagram.
We fix the case with the bolts included in the kit, as shown in the picture.
Install the lampshade with a few more bolts. It is better to do this from above, on a stepladder, so that it is more convenient to tighten the bolts.
Screw in

Wall sconces, like floor lamps, are very popular in our country, decorating most apartments and being an excellent addition to the interior. By emitting diffused light, they contribute to the creation of comfort in the house, making the home more cozy. The wall lamp is ideal as a lighting fixture in the bedroom or in the home reading area, emitting a soft light that promotes good visibility and does not strain the eyes. With the help of the spots of light created by these lamps, designers mask or, on the contrary, emphasize the necessary elements of the decor. The topic of this article is how to connect a sconce with a cord switch with your own hands.

Choosing a place to connect a wall lamp

Before proceeding with the installation of the sconce, it is necessary to choose its location correctly, without being too lazy to make careful measurements. This is especially true for paired lamps, which should be located parallel to each other. Otherwise, there is a great risk of getting a completely different effect from the lighting that was expected.

When choosing a place for installation, it is advisable to take into account that it is recommended to mount the sconce at a height of one and a half meters from the floor. Take care in advance to secretly bring the wiring to the connection point of the device.

Since this material is devoted specifically to connecting sconces equipped with a built-in switch, which is controlled by a string or chain, let's talk in detail about the procedure for installing lamps of this type.

Preparation for installation work

Before proceeding with the self-installation and connection of the sconce to your home network, you need to prepare the following tools and accessories:

Electric drill with drills. The type of the latter must be chosen based on the wall material. If the electrical wiring is installed in a house with wooden walls, the drills should be designed for working with wood, if the walls are concrete, then the type of drill should be "on concrete".
Phillips or flat screwdriver.
Indicator screwdriver.
Pliers.
Pencil.
Stepladder.
Sharpened knife.

The sconce connection diagram is usually included in the box with the product. It schematically shows how to connect the luminaire to the electrical wiring.

Installation procedure

Now let's figure out how to install a sconce lamp with a rope switch. In carrying out this work, follow the given step-by-step instructions:

We de-energize the room by turning off the switch or unscrewing the plugs.
Make sure that there is no voltage on the wires that will be connected to the sconce. For this purpose, we check the contacts one by one with an indicator screwdriver.
We attach the back cover of the wall lamp to the installation site.
We make marks with a simple pencil for the holes into which the fasteners will be mounted. In this case, the lid must be kept level, otherwise the holes in the wall will not coincide with the places for fastening on the device.
With the help of a drill we make holes in the marked places.
Fix the sconce cover to the wall with the dowel-nails.
With a sharp knife, remove the insulation from the ends of the input contacts (by about 5 mm).
We connect the conductors of the home wiring and the lamp according to the connection diagram.

We attach the body to the lid and fix it with the screws supplied with the device.
We fasten the lampshade with bolts (it is more convenient to do this from a stepladder).
We screw a lamp (ordinary, fluorescent or LED) into the lamp.
Slightly shake the sconce to check the quality of the installation. A well-fixed device should hold firmly in place.
We turn on the switch to supply electricity to the apartment.
Turn on the sconce with a rope switch and check the quality of its work. With proper installation, the lamp should not blink, and the wire connections should not spark.

Visual installation and connection of the sconce lamp in the video:

This completes the installation process of the wall lamp. We hope that our story was sufficiently detailed, and after getting to know it, you have no questions left on how to properly connect a sconce with a cord switch.

You bought a wall lamp - a sconce, without a switch. In the first part I wrote how to install a wall lamp of the "BRA" type on your own, despite the fact that you have a built-in switch in the wall with an output of 220 volts. But what if you do not have a built-in switch, but you liked this particular wall lamp by design and does not have its own switch. In this manual, I will show you how to install the switch yourself. For this we need tools and, accordingly, the switch itself. There are many types of switches; push-button and a switch with a cord (chain), I chose a switch with a cord and, using its example, I will show you how to install it in a wall lamp and connect it.

BEFORE BEGINNING WORK, MAKE SURE WIRES FROM THE WALL ARE DELIVERED

First, we take the lamp out of the box and unpack it.
Next we need tools and fasteners.
In this case, I will be attaching the lamp to the drywall.
For installation on concrete or brick, you will need a hammer drill
We take the lamp and unscrew the mounting plate.
We take the lamp itself and attach it to the wall
Marking on the wall against the plate fixing screw
We remove the wall light (BRA) and attach the fixing plate to our mark. There are slots on the mounting plate for attaching self-tapping screws, in these slots we make a mark where the hole will be drilled directly
After that, we take the screwdriver as shown in the figure and attach the plate to the wall, for this you need fasteners, they will differ for you depending on which surface the wall lamp will be installed on: concrete, brick, drywall or wood.
After that, we need to strip the wires, for this we take a knife and strip
This concludes with fixing the wall lamp and proceeds to the next part, how to install the switch in the lamp. To do this, we need a tool, in particular a screwdriver or a drill, to drill a hole in the wall lamp itself, a drill, one terminal block and the switch itself
So, let's get started, take a wall lamp and a marker, mark a mark on the bottom of the lamp where we will drill a hole for the switch.
After that, we take a thin drill and drill a hole.
Then we take a large drill and drill a hole according to the size of the switch, it is about 9mm, depending on the type of switch.
Then we take the switch and push it into the hole
After that, we take the terminal block and screw it to one of the switch wires
We unscrew one wire from the lamp terminal block.
After that, we connect the wire of the wall lamp to the wire of the switch
The remaining wire from the switch, we connect it to the terminal block of the wall lamp, into the same hole from where we pulled out the wire
This is what we should get.
Then we take the sconce and connect it to the wires taken out from the wall.
After that, we screw the wall lamp to the plate on the wall.
After that, we supply power to the wall lamp (BRA).
That's all, nothing complicated.
In our store, you can pick up an inexpensive ceiling chandelier

If you have any questions or doubts, qualified consultants will answer any question. Write to the group

For several decades it has remained one of the most demanded types of lighting technology. Their main advantage is diffused and soft lighting, which makes it possible to read comfortably, as well as to create accents and coziness in the interior of each room. Modern sconces differ in the type of construction and, accordingly, in the connection method:

luminaires with a pull-cord switch;
sconces, which are powered from the outlet using a plug;
lighting devices switched on by means of a button on the wall.

Self-connection of any type of sconce will not cause any particular difficulties if you know how to do it correctly and take into account a number of nuances. In this article you will find a detailed description of the process of all methods of connecting a sconce with your own hands with diagrams and an explanatory video.

Rope and chain models - how to connect a sconce with a cord switch?

Before connecting the lighting fixture, select the installation height and make the hidden wiring. To correctly install the product, you only need to connect two or three wires and fix the lamp to the wall.

To connect a sconce with a chain, you need the following tools:

insulating tape;
self-tapping screws;
screwdriver;
sharpened knife.

Important! Do not forget to de-energize the premises before starting work.

Also, at the preparatory stage, remove the insulation protection from the ends of the wires by about 5-8 mm.

There are two types of connection - with three and two wires:

in the first case, these will be wires zero (N - neutral), phase (L) and earth (PE - ground). Wire the connection to the corresponding input wires. To do this, clamp them with terminal blocks and fix them with the clamping bolts;
in the case of two wires, you will see a white or brown wire that is a phase. They are attached to terminal L. Blue wires represent a working zero, connect wires of this color to terminal N. If your sconce has two or more bulbs, then the number of contacts will increase. So, from two lamps, not 2, but 4 wires will be output, as in the photo below.

Upon completion of the work, close the luminaire body and fix the light device to the wall using self-tapping screws. Now carefully attach the lampshades, turn on the power supply and check the operation of the lighting equipment. You can clearly see how to connect a switch on a sconce with a cord, and make sure that it is very simple to do it yourself, you can in this video:

Keyboard models - how to connect a wall lamp with a switch?

An alternative to a lighting device with a rope-type switch are sconces, which can be turned on / off using a button on the wall. Often, the design of such products, instead of a chain, assumes only the presence of contacts that you need to connect yourself.

As you can see in the diagram, connecting such a wall sconce is almost as simple as the previous type models. Most importantly, remember the following points:

the input phase must go to the switch;
the phase from the switch must go back to the lighting device;
connect zero and ground in this situation directly.

Important! Be careful, in most products from China and some other models of sconces, all wires can be covered with insulating material of the same color. In order not to get confused and to ensure safety for yourself during repair work or maintenance of lighting equipment, mark all contacts with multi-colored electrical tape or cambric.

Cord and plug - how to connect a sconce to an outlet?

Another type of sconce is lamps without switches, which are connected directly to the power supply using a plug. Simply connect the bra pins to the appropriate wires on the electrical cord (as shown in the above diagrams, phase to phase, zero to zero) with a plug. Now plug the plug into a power outlet and enjoy comfortable ambient lighting.

The indisputable advantage of this method is that you do not have to groove and drill walls or additionally install a switch. If you find it inconvenient to frequently connect the plug to the outlet, referring to the diagram for keyboards, add a cord to the circuit that will allow you to break the circuit.

We hope that after familiarizing yourself with the diagrams for connecting the sconces to the network and the training videos, you are convinced that it is really easy to do it yourself. Modern manufacturers of such lamps offer a variety of charming and stylish models of various types in a variety of styles. Therefore, professionals advise using them to create a light design for a wide variety of rooms: a bedroom, kitchen, bathroom, living room, hall, etc.

When equipping your home, you often have to do various work yourself, this includes connecting all kinds of electrical appliances. This article will tell you how to properly connect a sconce with a cord switch.

Wall lights with cord

Modern lighting devices have a different type of activation: with a key, with a button, a cord or a chain. Wall sconces are an excellent addition to interior decoration, but here we must not forget about another advantage - functional purpose - lighting certain areas of the room.

Wall sconces are perfect for installation in the bedroom, hallway, bathroom. Quite often, with the help of them, long corridors or certain areas of utility rooms are illuminated. It is very convenient to use sconces for reading or handicrafts, so they are often installed over a bed or over an armchair.

Designers love to use lighting from wall lamps to translate their ideas to emphasize certain elements of the interior and mask protruding details. Today the assortment of such lamps is huge, so it is possible to choose different shapes of shades, color schemes, as well as different types of luminous flux.

How to connect a sconce with a cord switch

Before you start installing the sconce, you need to accurately determine the location of the device, carefully make measurements. This is especially true for paired lamps that will be located in parallel. To determine the location of the luminaire, you need to take into account the established rules - usually such luminaires are installed at a level of 1.5 meters from the floor. Here the question often arises of how to connect a sconce with a switch with a cord so that unnecessary wires are not visible. To do this, you need to perform hidden wiring in advance for the subsequent connection of the lighting device.

The installation itself begins with the connection of two or three wires. Before this, the network must be de-energized, and the work will be carried out using a sharp knife and insulating tape. First, the insulation at the ends of the wires is cleaned - about 5-8 mm each. Then the stripped wires must be bolted to certain terminals.

Possible connection types

In this section of the article, we will tell you how to connect a sconce with a switch with a cord that has two or three wires.

1. With three wires available: ground, zero, phase. They are connected to specific terminals, clamping the end of the wire with a clamping bolt.

2. With two wires available: a white or brown wire (phase) is attached to terminal L. The blue wire (there can be any shades of blue here) (working zero) is connected to terminal N.

After all the wires are connected, you need to close the case by placing a protective cover. The luminaire is attached to the wall with self-tapping screws.

Thus, we figured out how to connect a sconce with a cord switch, it remains only to install the shades and check the lighting fixture.

Sconces for the bedroom and children's room

Having chosen a lamp of a certain model, shape, color, it is imperative to think over which room it will be installed in, because different lamps are suitable for different rooms. For example, a wall lamp in a nursery or bedroom should have soft diffused light. This kind of lighting is relaxing and prepares you for sleep. A dense lampshade on a lamp or matte shades are perfect here. For the children's room, you need to take care of safety in addition to everything else: here the sconces cannot be crystal or glass, so that the child does not accidentally break them and not get hurt.

It is very convenient when the brightness of the lighting changes on the lamp - you can replace the chamber light with a brighter one when you want to read. This is also very convenient for a children's room, because children are often left with a weak light all night, so the sconce can serve as both a lamp and a night light. In bedside lamps, the use of LED lamps is quite popular, as they save energy.

Where to install sconces with a cord in the bedroom and children's room

Usually wall sconces with a cord in the bedroom are installed at the head of the bed. If the bed is double, then one lamp from each side. If the bed is single, then one lamp from one side. The method of installing a sconce in a nursery is a little different: here it is usually installed above the chair so that it is convenient for an adult to read fairy tales to a child before bedtime, and the light does not interfere with the baby's sleep. At the same time, it is the sconce with a cord switch that is very convenient, so that you could turn it on and off without getting up from the chair.

Wall sconces are great for bedrooms and children's rooms, as they not only serve as decorations, but also add functionality to the bedside area. They do not take up space on the bedside tables, thereby making it possible to put more necessary things on it.

Sconces for hallways and bathrooms

Luminaires for the hallway and bathroom are selected according to other criteria. Often these are small rooms, where the sconce is the main source of light. But for a more effective design of these rooms, sconces are specially installed to illuminate mirrors and the most significant areas. When choosing, it is necessary to take into account the humidity of this room: most likely, you will have to purchase a waterproof lamp here. And in order for this device to look better, it is necessary that the plumbing materials are combined with the lamp.

Lamps in the hallway should be chosen according to the following principle: they should not differ in too bright light, because a person comes here from the street or from an entrance and a bright light in his eyes causes not too pleasant sensations. If the entrance hall in the apartment is made in the form of a long corridor, then several identical sconces installed in a row will look great here.