Recommendations for finishing the MDF Corridor Panels. Wall panels in the corridor: protection and stylish design (55 photos) PVC panels in the corridor and bathroom

If the theater begins with hangers, the apartment begins with the hallway, because it is according to her design, guests are a first impression of the dwelling. Unfortunately, even the best repair over time loses its attractiveness and requires the update. If this time came exactly, and you think about the issue of updating the interior of the hallway, pay attention to the new finishing material - wall panels for the corridor.

Wall panels for the corridor

Variety of wall panels

Manufacturers of wall panels took care to satisfy the tastes of their customers. This finishing material is available in various textures, designer solutions, sizes and color versions. Depending on the technical properties and characteristics, the wall panels are classified into several subspecies:

tile panels

In the form, these panels resemble standard ceramic tiles, but from the opposite side there is a spraying system "Schip-groove". The panels of this type can be used as a single material for the design of walls in the corridor, and you can combine them with another finish, creating an interesting design composition. Tile panels are available in various color versions and are very often decorated with additional finishes.

Wall Panels in Corridor

rack panels

The appearance of this material resembles a "lining". On the back of the panels, the Schip-Paz system is also present, which significantly facilitates the process of their installation. As a rule, the height of the roll panels is from 2.5 to 6 meters, and the width of the products may vary in the range from 10-40cm.

Wall panels for corridor photo

leaf panels

The panels of this type are monolithic homogeneous sheets that can additionally be decorated with patterns and patterns. This finishing material is ideal for clearing the walls of non-standard sizes. In addition, the distinctive feature of the sheet panels is that with a smooth wall they can be mounted without the use of additional funds.

Wall panels for the corridor

Rules for selecting wall panels for the corridor

The main criterion with which you need to familiarize yourself with the choice of wall panels are the properties and features of their materials. Modern wall panels are most often manufactured from MDF, plastic, natural wood, chipboard, dvp, corks, minerals and polystyrene with mirror filling.

To make a corridor, you can use any kind of panels, but note that if the front side of the finish is additionally covered with a layer from wax or laminate, then they relate to the grade of moisture-resistant finishing materials. Since there are rarely in the corridors when the increased humidity is observed, there is no need to exercise special requirements for their moisture resistance.

Each material used for the manufacture of panels is distinguished not only by its design, but also by technical specifications.

MDF

For example, the MDF panels are highly durable. This material is capable of improving the sound and thermal insulation properties of the room. However, choosing to finish the corridor of the MDF panel, consider that if they are operated in conditions of high temperature, the material can expand, losing its attractive appearance.

Corridor finishing with wall panels

Plastic

Plastic panels also improve the soundproofing of the room. Finishing from this material is attractive to its design diversity: they can be glossy, matte or cellular. In addition, pictures and patterns are often applied to them. Plastic panels in the corridor are good and the fact that they are very easy to care for them. Since the material is not afraid of moisture, it is enough to be enough to clean against contamination. The only minus of plastic panels can be attributed to the fact that they are completely unprofitable material.

Wood

Panels made of wood, perhaps, are leaders in the list of the most attractive finishing materials. Wall panels made of natural wood ennoble the interior of the corridor, giving it a good and rich appearance. However, this material requires some designer unity, besides, natural wood is characterized by a high cost.

Panels in the corridor photo

Chipboard and fiberboard

Panels from chipboard and fiberboard, on the contrary, are attractive to their democratic price. This material is ideal in cases where the highest possible and unobtrusive design is required. However, note that the materials of the chipboard and the Fiberboard are not distinguished by strength.

Wall panels for the corridor

Bung

Cork panels have all the characteristics necessary for comfortable operation. This material is durable, natural, light, it increases the heat and sound insulation of the room. In addition, the wall panels from the traffic jam are distinguished by a stylish design. Their cellular structure is able to decorate any interior, especially an entrance hall or corridor.

Mineral wool

Mineral wool panels are usually used in those rooms where you need to create certain acoustic conditions or from the outside of the building (sandwich panel). However, if this material is treated with an additional coating, it can be used in the design of the walls of the usual hallway.

Mirror polystyrene

Panels from mirror polystyrene are attractive to their design. For their manufacture, a film that imitating the mirror coating is used. As a rule, the panels of this type are better to apply as an additional finishing material. In addition, polystyrene is characterized by good flexibility. Wall panels made of it are ideal for designing walls of non-standard forms, niches, protrusions, columns, etc.

How wall panels are mounted

Wall panels can be mounted in two ways: with glue or when using an additional crate. Adhesive can only be used if the walls in the corridor do not need alignment. If it is necessary to reap the irregularities of the walls, the panels should be mounted on the crate. At the same time, if you want to reuse the panels in another room, mount them not only to the crate, but also on wooden or plastic beammers.

Wall panels for the corridor allow you to drastically change the interior of the room with a relatively light installation process. And the good properties of this finishing material provide comfortable and durable operation.

Feb 9, 2016 Sergey

Often, our compatriots do not give much importance to the design of such utilitarian premises as corridors, spaces near stairs and platforms between staircase spans. Some use remnants of wallpaper, someone simply stains the surface of the corridor into one color. But any room of our dwelling, be it a personal room or a small yarn on the attic, worthy of our attention, can serve as a canvas to embody our desires in the field of space design. Even the most ordinary corridor can serve as not only by space that helps you get from one room to another, but also become an art object, perform a whole set of functional destinations and even become a highlight of the interior of your apartment or at home.

If very small spaces are allocated in the standard urban apartments of the old planning under the corridors, then within the framework of country houses or households located within the city, there is an opportunity to show creative at the design of utilitarian premises.

Before proceeding to the planning of the corridor, consider it a functional attack. Will this room be served only by an intermediary between rooms or perform any other functions. Perhaps you have enough space in the corridor to accommodate storage systems - open book racks or dresser. Maybe you would like to place on the walls of family photos within or artistic collection. Perhaps you brought cute souvenirs from different trips and they simply have nowhere to hang more, and the memory of the rest you are the road. The fact is that the choice of the finishing of utilitarian premises depends on the answers to these questions.

What needs to be considered by choosing options for finishing corridors and other utilitarian spaces:

sizes and shape of the room;
the location of the corridor in the house space (it is obvious that the hallway or subsequent corridor will be subject to greater pollution and mechanical effects than the corridor leading to the bedroom, for example);
the presence of small children and pets (the level of pollution, claws, leaving traces on the walls, drawings of small artists on the wallpaper);
the style of the whole house or apartment (if all your apartment is decorated in a modern style, it will be strange to see the corridor in the style of country or classicism);
it is necessary to decide whether you want the corridor to become part of the selected color palette of the household or became an accent stain on the canvas of your home.

In this publication, we would like to tell about the embodiments of the walls of the corridors, hallways and other utilitarian premises. Examples of real design projects will help you not only imagine a complete picture of wall finishing options, but also consider ways of harmonious, creative or practical decoration.

Consider ways of finishing walls in corridors, spaces near stairs and hallways.

Wall panels - a practical, comfortable and beautiful way of designing surfaces

Wall panels - finishing material, which is specifically designed for cladding corridors. They are easy to wash, simply mount themselves, can be replaced in case the detail of the facing failed. Options for color and textured solutions are diverse, for mounting such a cladding it is not necessary to have perfectly smooth walls. Wall panels look respectable, but at the same time their cost is acceptable for most of our compatriots.

From the point of view of the wall panels manufactured on sale, three types are distinguished:

rush set;
tile;
leafy.

As it is clear from the names themselves, the panels are long non-rigid rectangles of planks, which are usually attached to a wooden crate. Tile panels are produced in the form of squares or wide rectangles, which can be attached to both the crate and glued directly to the wall. Sheet panels are made in a separate large piece. In order to hide the seams of connection of individual sheets of panels, moldings can be used.

Currently, wall panels can be made of the following materials:

natural tree;
glass;
plastic;
plasterboard and Gypsinyl;

The selection of a particular material for the manufacture of panels will depend on your financial capabilities, the size of the premises and the requirements that you prevent the color, texture and technological characteristics of the wall facing.

Having plague wall panels horizontally, you can visually increase the space of the corridor. With vertical placement of the material, a visual increase in the height of the room is obtained.

Very often in the corridors you can meet the combination of wall decoration using wall panels. The upper part of the vertical surfaces is covered with wallpaper, it is painted or decorated with decorative plaster, and the bottom is lined with wall panels. This method is not only practical and convenient, but also has an attractive appearance.

For the house in the style of country, the wooden panels will be the best choice for finishing the walls of corridors and other utilitarian premises. Combining a light wood tree for wall cladding and dark for flooring, you can visually increase the space.

The set of wood panels from wood (or its artificial analog) of various breeds located in two tiers and in chaotic order create not only an interesting and factory appearance of the facing, but also bring the element of home comfort and heat into the cool atmosphere of utilitarian premises.

Decorating the walls lined with wall panels, moldings, eaves and gypsum stucco, you can get a great interior of the corridor or any other classicism style.

With the help of embossed wall panels (or they are also called 3D panels) you can create an interesting design of the accent wall. Such surfaces do not need an additional decoration in the form of paintings or mirrors, they themselves are a focus object. For lovers of original rigor in the interior and a minimum of decorations, this option can be a successful solution in the matter of choice of decor for the walls of the corridor.

With the help of decoration with wall panels, you can simulate almost an infinite number of surfaces of various modifications. Stone masonry or brick wall, wooden plates or ceramic tiles, mosaic or fresco - your fantasies are limited only by financial capabilities.

Wallpaper for the walls of the corridor - the classic of the genre

If some other than 15-20 years ago, our compatriots had no special choice when buying wallpapers, you can now simply drown in the assortment of stores offering goods for repair.

To replace simple paper wallpaper, which for utilitarian premises are not suitable due to the absence of the possibility of cleansing surfaces, new modern technologies came:

cork;
vinyl;
fliseline;
quartz;
mettalized with embossed;
liquid wallpaper;
textile;
glassworks;
wall mural;
linker.

Russian homeowners use the greatest popularity vinyl wallpapers. This can be explained by several advantages of this type of wallpaper - they are easily clean, resistant to mechanical loads, rather durable (as far as this concept is generally applied to the wallpaper), they have a wide range of color solutions, due to a dense basis, hide the defects of wall surfaces and are available at cost. But vinyl wallpaper has a significant drawback - they absolutely do not "breathe."

Corkscrews Suitable for large hallways or spacious corridors. Their main advantages are environmental friendliness and natural appearance, which is the ideal option for advocates using eco-materials, choosing a suitable style for their homes.

Liquid wallpaper They will become the ideal way of finishing walls with complex configuration and geometry. If in the corridors there are many arched openings, non-standard design solutions, then avoid a set of joints when using any paper wallpaper will help the liquid veneer option. Such wallpapers are easily applied, hide the defects of wall surfaces and do not require special efforts in cleaning. The appearance of wallpapers in the finished form depends on the method of applying and subsequent texture finish, painting. You can repaint the resulting surface by changing the appearance of your corridor or hallway as much as you like.

Quartz wallpaper - This is the base of paper or fliesline with painted quartz sand applied to it. This is incredibly convenient from the point of view of cleaning the canvas, it can be even brushed, it is absolutely not susceptible to mechanical effects. In addition, such wallpapers are fire-resistant, which is a rarity in this segment of finishing materials. Quartz wallpaper looks respectable and attractive. The joints between the sheets are not visible, the effect of the presence of a single wall cloth is created. Monophonic wallpaper from quartz can be painted latex paint and receive a new color of the walls at least every year. And the drawings on quartz wallpaper can be the most diverse - from a motley ornament to imitation of ancient frescoes.

Metallized wallpaper Embossed, as already understandable from the name, they have metal elements in their composition. More precisely, these wallpapers are a porous paper or tissue base with a thin layer of foil. Foil is applied to a special paint, then embossing or drawing. Such wallpapers are incredibly beautiful, elegant, they look respectfully and help to create a luxurious atmosphere of the interior. Among other things, the metallized wallpaper is strong enough and easily cleaned. But there are also disadvantages of this method of decoration of the walls - the surface under pasting should be perfectly even and absorb moisture, because the glue will not be able to evaporate through the wallpaper structure.

It is a tissue or paper base that plastic is applied with a thin layer. This layer, as a rule, has natural origin, is made of flaxseed gel. The working surface of such wallpapers is easily soiled and cleaning. The linker is exposed to staining with oily or water-emulsion paints. This is an incredibly durable finishing material. All these advantages are definitely reflected at the cost of the material for finishing.

Glass equipment Also refer to an environmentally friendly finishing materials. Gymelomotoes are a base for painting (usually use latex paint). This type of wall coating will easily withstand any mechanical impact, be it sharp claws of pets or scratches from constant friction. Gymelomes can be painted in any color, using stencils to apply an ornament or drawing. And this can be done an infinite number of times, the standby wallpaper for any influence of chemicals. Another key advantage of such wall coatings can be called the available price of the material.

Wallpaper with photo printing Help your wildest fantasies in the design of the walls. There were those times when the photo wallpaper was represented by template landscapes with birch trees and lakes. You can order printing your own photos in the entire wall or card of your city, for example.

Decorative plaster - Original design of the walls of the corridor and not only

Decorative plaster is an environmentally friendly material that allows you to quickly create the original design of vertical surfaces. The spectrum of color solutions and the possibilities of creating the simulation structures of this finishing material are truly limitless. Such coatings allow your walls to "breathe", but at the same time create a sufficiently strong and reliable coating of vertical surfaces.

Depending on the size of the granularity of the plaster, you use what tool to apply a mixture, one or another appearance of the finished surface will be created. And, of course, much depends on the chosen color palette.

Brick masonry as a way of wall design

Decor for the walls of the corridor - combine functionality with aesthetics

If you knew the collection of family photos or beloved artwork on the walls of the corridor, then surely lay walls in bright neutral tones to make an emphasis on the decor.

An excellent way to combine functionality with beauty - hang in the corridor or hallway mirror in a beautiful frame. Designers of the whole world are at your disposal. Even the easiest and utmost interior will play with new colors and transformed with the advent of an unusual mirror in the designer frame.

It is possible to make whole compositions from mirrors in different frames, even an empty framework of an unusual design can be used to decorate the monophonic walls and give the interior of individuality.

Excellent option to load the utilitarian room of the corridor is functionally - place shallow racks as storage systems. If the space is enough, you can consider options and with retractable, swing cabinets. If the corridor is not wide enough, it is better to stop the choice on a book rack with open shelves.

One of the most functional ways to decorate the walls of the corridor or hallway are wall lamps and sconces. Placing original lighting devices on the walls, you not only provide a sufficient level of illumination of utilitarian premises, but also bring element element, attractiveness to the interior.

Another way is not easy to diversify the interior of the corridor, and it is radically changed, is also associated with illumination. Built-in LED backlighting of different shades is able to completely transform the light space, erased the face of the room.

https: //www..jpg 889 847 DIX. https: //www..png.DIX.2015-05-17 18:36:55 2018-11-30 11:20:47 How to arrange the walls in the corridor practical and beautiful?

Features of wall decoration in the hallway

The hallway is a kind of face at home: it is she who creates the first impression of him from visitors. Therefore, it is important that the decor of this zone is attractive. But in pursuit of beauty, it is important not to forget about the appointment of the room, which imposes certain restrictions on the use of materials. In order not to repair the repair constantly, the selected decor must have such properties:

Wear resistance. Including resistance to abrasion and mechanical damage.
Durability. Optimally, the manufacturer guarantees at least 5-7 years of coating service.

Easy to care. Given that in the hallway the walls are often subjected to pollution, the material should at least carry wet cleaning. Optimally, if it can be brushed and use some detergents.
Maintainability. It is important that the coating can be restored. Then, when the defect appears, it can be repaired, which is much cheaper and easier to replace the entire finish.
Safety. The material must be safe for the health of others. In addition, it is necessary to take into account his fire safety. Do not use combustible or toxic coatings in the room where is located. It can cost life in a fire.

The color of the coating and its texture can be the most different. They are selected on the basis of the characteristics of a particular hallway. Combining materials, shades and textures, you can achieve a better result. Light tones, dark, on the contrary, narrow. Skillful use of the pattern on the coating, light design and competent installation of the mirrors enhance the effect.

The best materials for walls in the hallway

Various materials can be used in the hallway for wall design. We selected those that are optimally suitable for this. Consider each more.

1. Decorative plaster

It has an exceptional variety of textures and shades. Due to the fillers added to the fillers, the finished coating can be smooth, relief or with a pattern, small or large. Plaster makes it possible to achieve unusual decorative effects, in addition, it has a number of benefits:

Strength, high wear resistance and long service life.
Good breathability. Playpes walls can breathe.
Safety. The coating does not secrete toxic substances and does not burn.
Simple care. Most materials tolerate wet cleaning.

Of the disadvantages it should be noted the complexity of applying material, especially some of its varieties. Correct the walls can only be able to fly, which, of course, increases the cost of finishing. The price of the material can also be high. But this is more than the durability and the practicality of this type of finish. Another minus - decorative plaster is very difficult to apply for complex architectural elements.

2. Paint

Practical and fairly economical way. A wide color range of paints allows you to choose any desired shade. You can connect two or three colors, perform an ornament or pattern. Paints make it possible to get special decorative effects. Some of their varieties are capable of changing the color when changing the angle of view or lighting, imitate a variety of materials, cast metal, etc.

Paints easily fall on the surface, even to the one that has complex forms and hard-to-reach places. The small repair of painted walls will not be difficult, it will be enough to repaint the spoiled area. The advantages and disadvantages of different types of paints are presented in the table.

	Benefits	disadvantages
Latex	High resistance to abrasion, vapor permeability. The coating is well wash.	Old coating is difficult to remove. The constant impact of moisture can lead to peeling.
Water-emulsion	Easy to fall, no unpleasant smell, quickly dry. The cost is low.	Some varieties after drying are dirty, washed off with water. Limited application.
Acrylic	Quickly dry, economically spent, wear-resistant, safe, durable.	The complexity in the selection of colors and shades. With independent mixing, it is impossible to repeat.
Silicone	High strength, durability, vapor permeability, resistance to ultraviolet. Have water and dirt-binding properties.	Large consumption and high material cost.

Of the general disadvantages of using paint, it is necessary to note the need for careful surface preparation. Walls must be even, otherwise the slightest defect will be visible.

3. WALL

Classic finish method. The range of wallpapers is very wide: you can choose the appropriate option from a wide variety of colors and textures. The cost of them is relatively low. When choosing, it is necessary to remember that not all types of wallpaper will be suitable for the hallway. You can choose from these varieties:

Washable Wallpaper from Vinyl.Well hide the irregularities of the foundation, easily cleaned, well glued. Can imitate a variety of textures. The cost is low. Of the shortcomings, you need to know about low vapor permeability and the possibility of damage to the decorative vinyl layer. If the house has domestic animals, it is better to choose something else.
Fliseline wallpaper. Durable moisture resistant. It is easily withstanding staining, which makes it possible to repair them or just repaint when the design is bored. They are very easy to glue, especially varieties with a meter width. Of the minuses it should be noted.

Gymelomes. Pointers made using glass fibers. Different with high strength, wear resistance, immunity to moisture. Such wallpapers are not terrible mechanical damage. They are completely safe, vaporosham, withstand numerous coloring and the effects of solvents. In addition, they additionally reinforce the walls. Disadvantage: the need for careful preparation of the foundation.

Quartz wallpaper. A coating of quartz sand is applied to the phlizelin base. The material is very wear-resistant, not subject to mechanical effects, it is easy to clean and clean. Latex paint can be repeated, which allows you to update the coating as needed. The minuses include a fairly high cost.
Liquid wallpaper. Forming a monolithic, very durable coating with high wear resistance and good sound insulation properties. The material is quite elastic, when the building is shrinking, it does not form cracks. Easy tolerate multiple staining and wet cleaning. If necessary, the coating is easy to repair. Of the minuses, it is worth noting a fairly high cost.
Cork and bamboo wallpaper.Fully natural and very beautiful coatings. They have good sound and thermal insulation characteristics. Sufficiently resistant to various mechanical damage, unpretentious in care. The minuses include difficulties in applying. An aligned base and a special adhesive composition is required.

High-quality imitation of natural stone. Released in the form of tiles or flexible plates. The latter are especially convenient for the design of curved surfaces. For the inner decor, a composite is usually used, the basis for the production of which is gypsum. Artificial stone is enough to simply lay, he is well combined with. Of the advantages of the coating, it is worth noting:

Good wear resistance and high resistance to mechanical damage.
Durability. With the right installation, an artificial stone will be able to serve not one decade.

High moisture resistance. The material does not let the water to the base.
Easy of care. The coating is wellhed and not absorbed pollution.
Security, including fireman. Material is not a fuel.

The disadvantage is considered to be high cost, especially its flexible varieties. For this reason, the cladding is more often used to finish the room fragments: doorways of doors, corners, lower half walls.

5. Ceramic tile

A practical way of registration of the hallway. The selection of tiles is very wide. The manufacturer offers materials with a variety of colors and textures. Available imitation of expensive finishing materials: skin, natural stone, valuable wood. Of the significant advantages of ceramics, it is worth noting:

Strength and high resistance to all sorts of damage.
Durability, the coating can serve at least two decades.
Moisture resistance, which greatly facilitates care. The tile is easy to clean, and even aggressive detergents can be applied.
Good combination with other finishing materials. For example, you can make a tile only by the lower third of the walls most vulnerable to pollution.

By cons covering should be attributed not the easiest installation. Plug specialists who have styling material skills.

6. PVC panels

Wall plastic panels are well suitable for the hallway decor. Their choice is very rich: extensive color gamut, with a variety of textures, drawings and decor. Of the significant advantages of PVC panels note:

Low cost. Perhaps this is the most budget way of decor.
No need to level the walls before installation.
Simple care. The panels are well laundered.

There are many cons of the material. First of all, this is instability to mechanical damage. After impact, dents or even holes remain on the surface. When installing "eaten" a number of free space because it is required to assemble the crate. Panels do not tolerate UV radiation. They quickly burn out in the sun.

7. MDF panels

A good alternative to the lining of the tree. The base of the material is a plate of MDF, which is stained, covered with veneer or laminate. As a result, high-quality imitation of the skin, wood, stone, fabrics, etc. is obtained. The main advantages of the MDF panels are considered:

Environmental Safety. Material is harmless to others.
Strength and high resistance to various mechanical damage.
Durability. With the proper operation of the panel serve more than a decade.
Easy care. The panels are easily clean and cleaned.

Of the minuses, it is worth noting its fairly large weight, as well as the need to arrange the crate to consolidate it. Burning panels, which is also considered their disadvantage.

8. Composite 3D panels

A very attractive original view is distinguished. Made from various materials: glass, wood, drywall, pressed plates. Depending on the raw materials, their properties and cost are somewhat different. However, there are general advantages:

Fast and fairly easy installation.
The ability to disguise defects of the foundation, for this reason, difficult preparation is not needed.
Maintainability. If necessary, it is replaced by a fragment that has come into disrete.
The possibility of imitation of various materials.
Wear resistance and strength.
Easy care.

The minus material is considered quite high cost.

9. Laminate

It is well suited for the design of the walls of the hallway. Considering that the floor was created, it has excellent performance characteristics. Its advantages can be attributed to:

Strength and wear resistance.
Attractive appearance, a variety of coloring and surface textures.
Easy and fast installation of material.
No need to prepare the foundation before installation.

Of the shortcomings it is worth considering the high hygroscopicity of the material. It cannot be used in high humidity premises, since under the influence of moisture is deformed.

10. Fresca

Painting on wet stucco is very beautiful. However, only the artist can perform it independently, therefore a special finishing material is produced that simulates such a drawing. The fresco base may be synthetic or phliselin. It is possible to bring the marble crumb and plaster, which gives the decor a very realistic appearance. The fresco is used as an ornament, can occupy a fragment of one or more walls.

Most often, frescoes that imitate the imitancy wall are produced, but other options are also possible, for example, with a silk or velor texture. The material is durable, resistant to abrasion and has a very attractive appearance. Of the disadvantages it is worth noting the high cost and quite complicated installation. It is better to entrust it to experts.

What to take into account when choosing a finish?

Parishion - the premises are utilitarian. Before you start choosing her decor, it is worth identifying the desired functionality of the room. It can be the placement of closed storage systems, an exhibition of family photos, children's drawings, or souvenir-brought from vacations or something else. Depending on this, the design is selected. In addition to functionality, you need to consider:

Dimensions and shape of the room.
The overall style of house design.
The presence of young children and pets that can spoil some types of finishes.

Returning home, the first who meets us in the apartment is an entrance hall. She is the first and experiencing pollution from the streets. Little children and pets also show their particular interest in this room, often leaving random damage after themselves. Our guests, getting to us, for the appearance of the hallway form their idea of \u200b\u200bthe form of all the home.

Today, it is possible to find many varieties of materials on sale today. However, the creative idea of \u200b\u200bthe decoration of walls in the hallway or corridor should be dictated not only to aesthetics, but also based, first of all, on the practicality of choice.

Hall to attendance by residents compete in an apartment with a kitchen and a hygienic room. Therefore, it is necessary to approach the selection of optimal material for its walls. Wall coating should satisfy the following characteristics:

low wear;
resistance to mechanical stress;
high moisture resistance;
safety for human and animal health;
ease of cleaning from pollution and eliminate defects;
aesthetic appearance.

Despite the rich assortment of wall coverings presented today on the market, find one material that simultaneously performs all the set conditions, it will be very difficult. Solve the task will help the selection of several materials with a different texture, which will provide a competent joint combination or, if necessary, eliminate damage, will serve each other elements of the decor.

A more aesthetic and externally attractive material can be made up the upper part of the walls, and the lower bore is more practical. A skillful chosen combined finish option may not only look modern, but also put their accents in the hallway in the zone.

Types of modern materials for facing walls of the hallway

Considering that the surface of the walls in the hallway is often subjected to all sorts of pollution, the use of materials with a front layer requiring delicate and gentle circulation, better avoid.

Less capricious to periodic cleaning are surfaces, decorated:

in the color of the color;
individual types of wallpaper;
cork coating;
artificial stone with imitation of natural materials;
bamboo;
PVC panels;
clapboard or wood panels or MDF;
ceramic tiles - frescoes.

Wall painting in the hallway

Painted walls - This is a simple and economical option. All you need is to pick up in the building of building materials, a suitable caller, ready or mixed of several colors.

The texture of painted walls directly depends on the style of the room. In some embodiments, the severity of perfectly smoothly prepared for painting of walls is required. In others, with the help of color, it is possible to emphasize noticeable roughness and defects, as well as to give the walls of the effect of the scene.

Wall coloring does not require experience. And the exact calculation of the required amount of paint will significantly save financial expenses for repairs.

The disadvantages of this method are:

specific smell;
possible allergic reactions arising from inhalation of vapors during color;
the need to expect complete drying of the decorative layer.

Facing walls with decorative plaster

Decorative plaster is - This is a modern material that can give the walls of the hallway the original embossed texture and successfully emphasize its successfully selected shade.

This material allows both the rigor and restraint of one color and the most ambitious design designers, and to realize the most ambitious design designers, and implement the creation of high art prints.

Decorative plaster meets many criteria for choosing a material for an entrance hall. However, due to the complexity of working with this material, finishing the walls of the walls is only an experienced specialist.

Wall decoration by wallpaper

Wall-colored walls - familiar to many classic option.

Of the existing diversity of species under the criteria for choosing finishing for the hallway, wallpapers are most suitable:

fliselinovyesince they have not only many textures, shades and prints, but also can be used under painting;
vinyl with silk screening effect on a flieslinic basis (if there are no special requirements for environmental friendliness);
since they allow you to create a unique design of the hallway;
glass equipmentbecause they are not afraid of multiple repainting.;
wall mural with 3D or HD effectSince visually deepens the close space of the hallway, giving it an extra volume.

Modern types of wallpapers due to the embossed texture perfectly mask defects and damage to the walls, are easily cleaned and even wash. However, due to its insufficient resistance to mechanical damage, they are better to leave the dominant coating in the upper part of the hallway walls, combining with more durable options.

Wall decoration by the hallway with cork coating

Bung - This is a modern finishing material entirely of natural origin.

In addition to the fact that cork coverage meets all the requirements that are presented to the materials for the walls of the hallway walls, it is:

great pushes water and resistant to humidity 100%;
has high noise insulating characteristics;
provides in the room the stability of temperatures;
does not absorb smells;
repels dust and fat;
perfectly combined with other varieties of finishing materials;
it has a light weight, which greatly simplifies the performance of wall cladding.

Therefore, the belonging of this material to the high price category is fully justified.

The convenience of registration of the hallway coating from the tube is also explained by the presence of varieties of outputs:

square-shaped panels 30 or 60 cm side;
rolls with a 50 cm working width;
paper-based wallpaper;
laminated plywood-based panels or MDF with Schip-Paz lock, characterized by ease of installation;
liquid composition of cork chips with acrylic substance as a bundle having natural or colored tones.

Depending on the method of application, this option allows you to achieve smooth or embossed wall texture.

The surface layer of the cork coating is made of crumb or veneer. The aesthetics of the outer surface of the cork coatings used for the decorative decoration of the walls gives the layer of wax. When cladding the walls of cork coatings remain invisible. The durability of the cork coating is average of about 20 years.

Facing the walls with artificial stone

Artificial stone today in the trend. This material has several varieties located in different price categories:

gypsum or cement - the most eco-friendly and at the same time a relatively inexpensive version;
acrylic - on a natural basis in combination with marble or granite crumbs and acrylic resin as a bundle. Characterized by high wear resistance;
quartz - consisting mainly of quartz crumbs with a bunch of polyester resins. The most resistant to mechanical damage, does not absorb dirt and dyes, is easily cleaned.

Due to the wide fancy of production designers, artificial stone is produced with the most different reliefs and colors. The hallways lined with them and corridors have an original image. An artificial stone can be "stated" as the entire surface of the wall, and its separate sections, shifting emphasis towards the doorway, in the most vulnerable lower zone, vertically, diagonally or chaotic.

According to the strength characteristics, such material is almost not distinguishable from the natural stone. If it is necessary to repair a wall of the wall, decorated with artificial stone, you can easily remove the element with a visible defect, replacing the new one.

Wall decoration Bamboo

The walls decorated with bamboo give the hallway an elite respectable image. The naturalness of such a coating enhances the natural atmosphere of the room in eco-style.

One-piece bamboo trunks of the same or different thickness are connected to the coating, produced in the form of panels or rolled wallpaper. They have a monophonic or natural motley pattern and are perfectly combined both between themselves and with other materials imitating natural elements.

Bamboo coating has high strength and is not damaged from external influences. Care of the walls from bamboo is carried out by a vacuum cleaner.

Facing with PVC wall panels

PVC panels - inexpensive, durable and at the same time aesthetic version of the lining of the hallway walls. Weight in the forms of a rush, sheet type or in the form of plates, this type of finish perfectly masks the curvature of the geometry of the walls and all sorts of surface defects, as well as hide the electrocabels.

For hallways, the panels with the image of the ornament under the panel or imitating stone masonry, bulk sand or wood are selected. Docking with other types of finishes can be performed using moldings. The facial surface of the panels is durable and wear-resistant. It is not afraid of even sharp pets of domestic animals. It is easily contained clean with periodic wet cleaning.

Wall decoration by the hallway

Wood finish with a tree is a centuries-old tradition. This room is always supported comfortable temperature. For lining of the hallway walls, natural lining of coniferous and hardwood or panels from the wood and MDF massif can be used.

Natural lining. To decorate the interior of the hallway in the "Country" styles, the "Russian hut" or "French Provence" will suit the lining of the "Extra" classes, "A" or "B". The effect of visual increase in the size of the room in the desired direction is achieved by vertical or horizontal laying of the lining.

Panels from an array of wood.This type of finishes, using in various styles, gives the room aristocracy and nobility. Refers to the category of elite finishes. The panels from the wood array are usually located in the lower part of the hallway wall, combining with other types of finishes. The covering is less common in a continuous way, only owners of respectable mansions with spacious hallways can afford it.

MDF panels. The front side with imitating solid wood pattern and covered with a protective layer is not inferior by strength and durability panels from the wood array. However, this option for finance finishes is less costly.

The disadvantage of this type of finishes are flammable and instability before the influence of pets.

Wall decoration with ceramic tiles

Such a time-tested version of the decoration of walls, as a cladding of ceramic tiles today, thanks to modern forms, sizes and, of course, colors and prints makes this material one of the most fashionable interior details of the hallway.

Ceramics has high strength characteristics and indicators of moisture resistance of the tile and securely protects the walls from various damage. And the glossy surface of the tile makes it an additional source of illumination in the hallway. However, approach the combination of ceramic tiles with other options for wall cladding should be delicately.

Decorating the hallway fresco

The fresco refers to the category of elite finishes, therefore it is very expensive. Modern frescoes decorate the walls of the hallway with images for every taste and create her rich image.

The originality of the room is attached: painting for raw plaster - Perform yourself this coating can only having the skills of the artist; ready frescoes on the phliselin or synthetic basis - They are applied on the walls by type of eyeballs with photo wallpapers. Due to the enclosures available as part of the murals, it can give the surface with the texture of the aged wall, velor, silk, plaster.

With modern ways to finish the walls, it is easy to implement designer ideas for an entrance hall even if you live in the apartment inquisitive kids and active domestic animals. What materials and combinations choose the entrance hall looks stylish and fashionable, depends on the individual preferences, fantasies and financial capabilities of the buyer.