Encyclopedia fireproof

Retractable cabinet for refrigerator. Kitchen drawer. Decorate hanger

Any hostess is not averse to have an extra room in the kitchen for storing various equipment and accessories. Often the problem is that it is difficult to find a free space for installing a new cabinet. But if you carefully look at various "catcakers" of the kitchen, then in any, even insignificant in volume, there is a place for a small or shelf.

This is how, for example, Dan and Erin beat this situation in its kitchen. A narrow free space remained between the wall and the refrigerator when it is permuting. It has been a solution to make a narrow retractable cabinet with shelves for storing various high boxes and containers with products. About how the project developed, they are told in detail on their website http://www.diypassion.com. I will try briefly, following the steps to set out their story about making a drawn cabinet.

The cabinet is made of planed pine boards and relies on four rollers. The rear wall of the cabinet is closed with a sheet of organic. To prevent falling objects from the shelves, limiters made from long wooden braids are installed.

The size of the cabinet was determined on the basis of the height of the refrigerator and its depth. It took about 8 hours to make the cabinet.

Materials and tools:

  • Stroven pine boards.
  • Leaf of organity (white on one side).
  • Furniture non-turn wheels 4 pcs.
  • Saws.
  • Carpentry glue.
  • Putty.
  • Braided.
  • Primer and paint.
  • Stencil, foam tampon.
  • Nails.
  • A circular saw.
  • Drill with a set of drills and bits.
  • Emery paper medium grain.
  • Measuring tape.
  • Corolnic
  • Level.

Sequence of assembly.

Step 1. Boards cut into size in accordance with the previously developed project.

Step 2.. The cabinet framework was assembled.

Step 3.. The average shelf was fixed with self-drawers and additionally nails. The remaining shelves are removable and stacked on the supporting bars. The distance between the shelves was determined depending on the height of the standard containers in which food is located. The lower shelf is designed for the highest items.

Step 4.. The back wall of the cabinet was poured out of the body of the organitis. Then, through the stencil on the white surface of the organity with a tampon, a black paint was applied pattern. Later, the tampon had to be replaced with a more effective tool - a paint roller.

Step 5.. Just above the front edge of the shelves through the drilled through holes in the side walls of the cabinet were peaked.

Step 6.. Furniture wheels were screwed to the base of the cabinet.

Step 7.. The putty was embedded by all holes from nails and self-tapping screws.

Step 8.. The surface was grinding, primed and covered with two layers of paint.

Step 9.. The final assembly of the cabinet was performed in the kitchen. Rear wall was attached here. Then the retractable cabinet took its rightful place in a narrow niche between the wall of the kitchen and the refrigerator.

As for the stability of the cabinet, it is reliably held in a niche. But still it should not fully roll out of the refrigerator. If you intend to make a retractable wardrobe for your own kitchen, you should think about installing a limiter that impede the full cabinet roll.

POST Views:
2 401

We often do not even suspect how original and useful are the simplest solutions for the organization of space and its rational use.

website gathered a selection of 8 interesting ideas that make a kitchen life

How to close the narrow opening between the refrigerator and the wall? Turn this disadvantage in the advantage - install the hidden retractable shelf. It is perfect for storing spices, canned and drinks.

Metal office stand for folders can be used as a system for storing pan. This will keep them in order, and also protects from scratches and dents.

Magnet - as a storage idea

This is a wonderful idea for creating additional areas of storage of cereals and spices in your kitchen. Just secure a pair of neodymium magnets on tin covers.

Retractable Boxes for Vegetables and Fruits

In boxes. This is a fairly simple project for anyone who can handle the tree. Make sure that the guides at the boxes are installed correctly so that they can be easily removed.

Attach the holders for kitchenware to the wall of the cabinet. Ideally, as close as possible to the stove, for maximum convenience.

Stand for magazines

Attach the stand for magazines to the inside of the locker door. It will free a little space, and also helps keep foil and bags within easy reach.

In the knobs of most skils there is a hanging hole. To organize their storage there is a special retractable system. It perfectly copes with the eternal problem of storing large dishes in the kitchen.

In order to keep the spices at hand while cooking, use the drawer next to the stove. For greater convenience, spread them alphabetically.

The kitchen is a special room in the apartment. It must combine ergonomics, design and high functionality.

These requirements are especially relevant for small apartments, in which the issue of free space is especially acute.

On a small quadrature it will be necessary to fit and dishes, and household equipment, as well as many useful and not very little things.

In order to ensure the most convenience of using the workspace, the kitchen must be equipped with a large number of places where it is possible to hide various utensils that can be needed often, sometimes very rarely.

Of course, you can use mounted cabinets and folded there, for example, pans on each other, but it is not very convenient and it is worth thinking about a more solid approach to the issue of placing dishes and household details.

Kitchen furniture is constantly updated with new ideas that bring more comfort in the kitchen outline, convenience and most important functionality and capacity.

One of these ways to unload the space of steel retractable shelves. This allows you to keep in sight dishes and utensils. So the kitchen greatly wins in appearance and order.

Advantage of retractable shelves

The main idea of \u200b\u200bthis approach is to maximize the use of literally the entire space that is at our disposal.

Such systems allow you to highly increase the capacity of the usual kitchen headset, while accommodate on the same area.

A lot of space is released, which can be used in various ways and that the most important thing in the kitchen can be easily moved.

The most common option is the built-in shelves in floor or suspended cabinets. Their plus is that they are easy and convenient to use.

As the door usually opens, only we see not familiar 2-3 shelves, but a whole multi-level system that can be filled with the necessary objects to the failure.

Such "boxes" can completely travel from the cabinet, and therefore it will not have to be deeply reached for the desired thing. Everything can be decomposed evenly and get to the desired thing at any need.

In addition, the retractable shelves are equipped with a reliable mechanism. Shelves do not need to hold so that they do not collapse under the severity on the floor.

Varieties of retractable structures

There are several options that can be realized in the kitchen depending on the needs of the room.

Retractable drawers

Such simple designs may have different depth configurations and widths. Often, additional partitions or sections intended for storing small objects can be installed in them.

Retractable boxes are equipped with the ability to push the entire design at once. So you can view all the contents of the cabinet.

It is very convenient if you want to "revision" on the shelves or quickly watch what you need to buy before going to the store.

Such boxes will be conveniently located depending on the assignment of their contents. For example, the cabinet with saucepans and pans is best to put near the stove, and the dishes near the washing.

Cargo

In essence, this is the same drawer, but it is intended for use for bottles and high banks. It is rather narrow, its width does not exceed 20 cm.

Small sizes allow you to place such a locker in various overwhelms where it can come under hand. They can accommodate spices, which will be comfortable next to the stove.

It often happens that the kitchen remains a free angle or any space. It is here, perfectly accompanied the cargo box.

Baskets for kitchen heads

Retractable baskets embedded in furniture, look very beautiful and noticeably unload the space due to their "light" appearance.

Depending on the size, they can be embedded in a closet or an end of any size. At the same time, the guides will be installed in such a way that the basket leaves completely, which will ensure comfort when used.

Such a product can perfectly complement the interior. Let's say, under Provence or Country it will fit perfectly.

Photo examples of retractable shelves in the kitchen

Guys, we put the soul in the site. So
what you open this beauty. Thanks for inspiration and goosebumps.
Join us in Facebook. and In contact with

So that the apartment looks stylish and cozy, do not necessarily spend a lot of money. Quite simple girlfriend, a little fantasy and desire for change. And of course, you can watch interesting ideas for the house, which is divided from time to time website.

So, what can be done to cheap and tastefully issue the interior.


1. Use ribbons instead of rings and clamps

2. Update curtains using edging


3. Put manually flower pots


4. Draw a marker pattern on the lamp

A little patience and a marker that writes on different surfaces - and the modern lamp is ready. How to draw a picture on the ceiling, is shown in this blog.


5. decorate the lamp with prudent materials


6. Make Handmade Watch

Original wall clocks in the best traditions of expensive decor stores can be made at home in a few hours. It is not as difficult as it may seem. Instructions for creating clock in the style of the school board. And it is shown how to make a watch in the style of PIN-AP.


7. Organize a real mini-bar from the old servant

The era of the servants with tons of crystal irrevocably gone into the past. But here are also the servants yet. So why not turn your furniture that served in a modern home minibar (not necessarily alcoholic). It turned out very well.


8. Use angular shelves


9. Make an extra shelf for spices


10. Use locker doors


11. Attach magazine holder


12. Stick fabric "wallpapers" on the door

With the help of fabric with a pattern and glue from corn starch, you can originally decorate a boring door. Such "wallpapers" are easily removed, so when the drawing is bored, it can be easily removed or replaced with a new one. You can look at the process of decorating the door in this blog.


13. Coloring the rug at the entrance door in unusual colors

The door rug may also be interesting. To do this, it is enough to paint in bright, non-standard colors. How to turn an ordinary rug in the original thing, look at this blog.


14. Make a rug in bathroom from natural materials

The plug is an excellent natural material that dries quickly and retains warmth well. It is pleasant to come on such a rug with bass legs. And his creation from wine traffic jams will probably make it remember many good moments. How to make such a rug, you can see.


15. Hang wall panel


16. Arrange a photo exhibition


17. Add color accent on the door

This idea is ideal for cases when you want to revive a little interior, but there is no possibility to change something radically. Such a focus can be checked even on a removable apartment, in the end, you can always return as it was. As is done, shown.


18. Color the old linoleum


19. Move the desktop regiment in the mounted

Often on the table there is not enough space for storing different trifles. In this case, the desktop shelf can be easily turned into a wall, and the folding one. It will not only allow to organize space, but also decorate it. Simple instructions can be found.


20. Decorating Handbugs for Clothes



This master class will especially be useful to those who live in small one-bedroom apartments. I will show how to make a retractable rack in the gap between the wall and the refrigerator. It would seem that there is a width of just a few centimeters, but you will be exactly surprised when you will see how many items can be stored in this gap.
Initially, the shelf-rack is not visible. In fact, after its manufacture in your kitchen, nothing will change, the coat of what is formed by a new and convenient space for storing various jars, bottles and TPs.


The rack is put forward by a simple movement. And now see how much it is stored there.




The distance of the gap is only 11.5 cm (in the photo of the roulette in inches), and what a huge number of different items can be stored.

Materials

Necessary materials that I used for this project:
  • Rear back board. I have a size of 61 cm deep and 121 cm in height - in fact, it is the dimensions of the entire rack without thickness. The width of the entire rack is slightly less than the width of the gap.
  • Boards on the shelves - 6 pieces.
  • Two boards on top and base.
  • Two boards on the side of the shelf.
  • Two wheels for the movement of the whole design.
  • Round wooden rails.
  • Self-tapping screws
  • Glue on wood.
  • Handle from the cabinet to extend the rack.
I don't see the exact dimensions of all boards to specify, since you will be everything in your own way. In the case of which they are not considered to be difficult. But for this, first measure the width of its gap between the refrigerator and the wall, the depth of this gap. Decide on the desired height of the future shelf.
All this can be done in 15 minutes, drawing a sketch on pencil paper.

Production of a shelving for kitchen

The whole design is quite possible to assemble on some screws, but additionally I have glued to the wood with glue.
Spas the shelves, figured the amount of necessary.



Began to build a box. The jokes planted on the glue.


Left to dry, pressing what it was.


It turned out a glued box of the rack.


Additionally recorded self-draws. If you use thin boards, before screwing the screws, drill the hole, so that the board does not cracked.


In the end, I got to the shelves, posted and screwed the screws.



Since the rack is very narrow and when extending from it can fly bottles and cans you need to make a kind of side. At the beginning I thought to pull the line or rope, but in the end I stopped on round rails.



He drilled on the sides of the hole, cut off the rail in length, inserted and fixed everything with glue.


In the end measure the thickness so that there are no exceeds. In my case, they should not be, as we move the refrigerator a little further, I do not have the opportunity.

Similar publications