Interesting and unusual ways to light match. How to ignite the match without a box at home? How to light match? How to regret the match without a box

Methods for the ignition of matches without a box at home.

There are situations in our lives that require a non-standard approach to solving the issue, manifestation of smelting.

Lovers and professionals hiking on nature face the need to ignite the fire, but the box with matches can refer to either its incendiary part.

Knowledge of the methods of igniting matches with alternative methods will come to the rescue.

About them and will be discussed in this article.

How to light match on the boxes?

First, the technique depends on the material of matches. For example, paper to light up the same as wooden, it will not work. You need more snarling and practice.

Slide the ignition of ordinary wooden matches about the box in the following steps:

• take a match and take it in the middle with two fingers - index and big. The head of the match should look from you,
• in the other hand, fix the same fingers in the box so that the incendiary element on its side is turned to match,
• install it at the top at the start point of the ignition strip and moderately press the match the match. Pressure Adjust if you need to repeat this action again,
• sharply and accurately swipe on the incendiary strip of the box,
• if the flame flashed, move the match from it. If not - repeat the movements designated above.

Ways to light match

Ways to light matches in the absence of a lot of box. We list the most common.

If the match is dry, then fit:

• paper
• glass window and mirror surface
• clothes
• dry Smooth Surface Stone
• brick and / or painted wall
• concrete floor
• tile
• burning flame
• battery
• step in the entrance
• flint

In the case of a wet match before igniting, spoil her about your hair.

Is it possible to light a match with a nail?

The answer is ambiguous. If without special means, which was smeared to nail on the eve, then no.

On the forums of those who are interested in hiking and the abilities of human smelting, they say that it is quite realistic to light the match with the nail. To do this, act in any of 2 ways:

• soften the matches in the water and apply it to the surface of the nail. Wait for a complete drying tools. Then ignite the new match, pressing it tightly to the nail,
• cover the nail plate with liquid red phosphorus, and from above - varnish. Hand with a painted finger take care of the water contact. Repeat the infusion of phosphorus again in 3-4 days. Gilt only dry mat.

How to light the match with a rubber band?

You need:

• 2 Dry matches
• stationery, or differently for money

Procedure:

• fix the gum in the form of a tight loop around the head of one match,
• in the free edge of the gum Insert the second match so that its head is located just above it,
• hold a fixed match, and delay the second with a rubber to the maximum condition. But do not allow the break,
• sharply pull the free match down. At this point, because of the friction created, it should light up.

How to skid a match about paper?

• Dry match Take large and index fingers and bring to the underlying paper lying on the table,
• position the match at an acute angle, slightly touch her head to paper,
• with pressure, dramatically and with a tight, swipe along the entire length of the paper sheet,
• if the attempt was not crowned with success, repeat the actions above again. Follow the amount of sulfur on the side of the match of the match, which spend on paper. If she is erased, turn the match.

Is it possible to light the match under water?

Understanding literally the question, we will definitely answer - no.

If you took it with humor, you will easily lit a match under water in cases:

• your stay in the submarine
• performing action under any water capacity, such as a pelvis or glass
• use of special hunting matches in rainy weather under the umbrella

How to light a match about the glass?

• First prepare the glass surface itself. Treat it with any degreasing fluid. Give her to dry.
• Finger to one hand fix the match so that its head come into contact with glass.
• Without excess push, under an acute angle to the glass, with a wide scale dramatically swipe.
• If the first attempt was unsuccessful, repeat more. Watch for the integrity of the head. If it is broken, turn the match with the other side.

How to braid a match with one hand?

• Gently open the box with matches and remove one.
• Close the box and put it vertically on one of the ribs of the retractable part.
• Press the box on one side with a thumb, with the opposite - match. Her head will place in the direction of the sulfur strip of the box, and the free edge hold down between the nameless and middle fingers.
• Sit the box on 4-5 cm above the surface of the table and dramatically lower down. At the same time, the match will move from the bottom up the sulfur strip. Having reached the top point, she will burn.

How to skid a match from the battery?

Prepare:

• batteryuk
• match
• a piece of insulated wire
• scissors
• flooring for wire
• insulating tape

Procedure:

• blinds carefully remove the isolation on both sides of the wire
• one end with veins to clean up scissors
• at the second end, separate one lived, and the rest remove the laying
• sliced \u200b\u200bEnd of the Wire Fix the Colelet to the Battery from the Minus
• loose veil wires tighten around matches
• keep the last two fingers in the middle
• bring matches with spending to the battery to the plus
• a second on a match flames flames

So, we got acquainted in detail with the ignition methods of matches without a box. When you practice them, be sure to follow the rules of fire safety. And, of course, perform the experiences without children, so that they do not want to repeat your experiments with matches.

Video: How to light a match from the battery?

Everyone should know how to regret the fire - you will not disappear with such knowledge. A real dude knows exactly how to get a fire without matches. This is necessary for survival skill. It is impossible to guess when you need to make a bonfire, and at hand it will not be matches. Maybe your plane will fall in some wilderness, for example, somewhere in Alaska. Or, for example, you will go to the forest and lose your backpack in a fight with a bear. In the end, you can be in conditions of very windy or wet weather, when matches are practically useless. It does not matter whether you will have these skills ever, but it's still very cool to know how to get a fire, in whatever conditions you are.

We produce fire friction
Extraction of fire friction is not for the faint of heart. Perhaps this is the most difficult from the "unclean" methods of mining. There are different ways of friction fire production, but the most important thing in this matter is to use as a piece and rod.
The rod is a stick that needs to be twisted there and here around its axis to create strong friction between it and a plank for obtaining a spark. If you create enough strong friction between the rod and the plate, you can get glowing coals and use them for burning fire. Poplar, juniper, aspen, Iva, cedar, cypress and walnut are suitable for getting a fire in this way the best way.
Important moment: Wood must be dry.

Manual drill
The method of manual drill is the most primitive, simple and at the same time the hardest. All you need for the method is a tree, strong hands and iron patience. Applying such a method, you will feel like a real primitive person. So, we produce a fire with a hand drill:
Collect the clutch into a compact bunch, reminiscent of the bird's nest. The nest from the cloud will be used to be worried about the flame obtained from the spark that we have to be mined. Such a "nest" must be made of a material that lights easily, for example, from dry grass, leaves or bark.
Make a small deepening in the "nest". Cut the V-shaped hole in a plank for fire and make a small recess next to it.
Placing a bark for this deepening. They will be hit by smoldering coals, arising from the friction of the rod about the board - this will give the fire chance to flared.
Start rotating the rod. Placing the rod into the dust recess. The length of the rod should be at least 60 cm so that everything worked properly. Press the rod on the skip and rotate it between the palms, quickly moving them up and down the rod. Continue to do it while driving coals are not formed in the hole hole for fire.
Splinning the fire! As soon as you see the red coals, they say on the board for the fire so that they fell on a piece of the cortex, located under the hole. Move Cora to your "nest" from the cloud. Carefully and carefully burst on the coal, so as to take the flame.

Fire plow
Prepare a plan for fire. Cut in a plate of deepening, where you will put the rod.
Three! Take the rod and place its end in the recess on the plank for fire. Start rubbing the tip of the recess wall in a plank, moving it up and down.
Starting fire fire. Around the "nest" from the clock so that smoldering coils fall into it, which will arise from friction. As soon as you catch the corner, tenderly blow on it - and get a small live flame tongue.

Drill from Luca
The use of onions for the extraction of fire is probably the most effective of friction methods, because it is easier to maintain high pressure and the speed of rotation of the rod. There is strong friction necessary to mining fire. In addition to the rod and plate for this method you will need a weight loss to hold the rod, and onions.
Make a Device for weighting. It is used to push the end of the rod that will be on top: the rod is driven using a bow and because of this becomes unstable. To hold the rod, you can use a stone or a piece of wood. If you use a piece of wood, it should be harder than the rod. It is very good to use water or oil as a lubricant so that it is better to progress.
Make onions. It should be the same length as your hand. Use a flexible, slightly twisted wooden vine. The onion valuation can be made of anything, for example, from a lace, rope or strips of raw leather coarse dressage. One condition: it should be a durable material that does not break. Stretch the tent - and you are ready to start mining.
Prepare a plan for fire. Cut the V-shaped hole, clutch under the hole.
Torny rod guide. Placing the rod in the loop from the rust of the bow. One end of the rod should be in the hole that you did in the table, and on the other it is to put it with a stone or a piece of wood.
Start moving onions. Move the onion back-back in the horizontal plane, right as when you saw something. Actually, now you have collected an elementary mechanical system. The rod must rotate quickly. Keep moving onions until you get coal.
Make fire to flare. Throw glowing coals into a clutch and easily burst on them. Ready! Now you spread the fire.

Flint and Steel

This is the old method. Have good flint and lights - it is always a good idea. Matches can get intoxicated - and then they have no sense, but in this case you can still count on your flint and lightning.
If these things were not at hand, no one forbids you improvise using a quartzite and a steel pocket knife blade.
You will also need a ignite material - this is usually tissue or moss. They caught a spark well and smolden, not fragile. If you do not have a special material for ignition, then a piece of mushroom or bark is quite suitable.
Fix the material for ignition and stone. Send the stone with a big and index finger. Make sure that the distance from the fingers to the edge of the stone is approximately 5-7 cm. The material for ignition should be between thumb and silicon.
Bay! Take steel rod or use knife handle. Stick steel about flint several times. Sparks will fly away from steel and fall on the material for the ignition, causing the drainage.
Development fire. Put the material for ignition in the "nest" from the cloth and easily bury on it to inflate the flame.

We produce fire with lenses

With the help of a lens, the fire is easier than simple. Anyone who in childhood melted plastic soldiers playing with a magnifying glass, knows how to do it. If you have never engaged in such things, then here's instructions

Traditional lenses
All that will be required to obtain fire is a lens required for the concentration of sunlight at a certain place. Magnifier, glasses or binocular lenses are perfect. If you add a little water to the lens surface, you can enhance the beam.
Turn the lens at an angle to the Sun to focus the beam on the smaller area as possible. Around the "nest" from the clutch to this spot, and fire will soon grow together.
The only drawback of this method is that it works only when there is a sun. Therefore, if it happens in the evening or on a cloudy day, the lens will be useless.

In addition to the simple fire incitement method with the lenses there are three additional methods of mining of fire with lenses that also allow to obtain fire.

Balloons and condoms
Filling a balloon or a condom with water, you can make a lens from these simple things that will help get the fire.
Fill out a condom or balloon with water and cover the tip. Give the ball or a condom as a spherical shape. Do not inflate a condom or a balloon too much because it will distort the focus of the sunny beam. Coolas the balloon, giving it a shape that will focus the beam. Try to squeeze a condom in the middle to form two lesson lenses.
Condoms and balloons have a focal length of less than that of ordinary lenses, so it is necessary to place them at a distance of 2-5 cm from the cloud.

We produce fire with ice
Ice and a flame - not only a quote from Pushkin, which you probably remember from the school course of literature. With a piece of ice, you can really get the fire. Everything you need to do for this is to give a piece of ice the form of the lens and then use it for its intended purpose, like any other lens. This method is especially good for tourists in winter.
Alive clean water. In order for ice from ice to make a lens, it should be transparent. If the ice is muddy or contains any impurities, then, no matter how you beat, you will not add fire with it. The best way to get a transparent piece of ice is to fill the ball or a cup of transparent water from the lake, a reservoir or melted snow and give water to freeze. A piece of ice should be approximately 5 cm thick in order to serve a good lens.
Give a piece of ice the shape of a lens using a knife. Remember that the lens is thicker in the middle and narrower near the edges.
After you get a rough form lens, polish her hands. Heat hands melts ice enough to get a good smooth surface.
Start getting fire. Establish an ice lens at an angle to the Sun just as if it were an ordinary glass lens. Build a ray of light on a bunch of cloud and see how it is useful to remember the quotation of Alexander Sergeevich.

Bank from under "Coca-Cola" and chocolate tile
I saw this way in a video on YouTube, a rather interesting thing. All that we need is a bank from under the "Coca-Cola", a chocolate tile and a sunny day.
Open the tile of chocolate and start rubbed the chocolate itself about the bottom of the bank. Such a polishing will make the surface of a tiny bottom shining as a mirror. If you do not have chocolate with you, then the toothpaste works in the same way.
Get Fire. After polishing, you essentially received a parabolic mirror. Sunlight will be reflected from the bottom of the can, and focus in one place. This is something like the principle of operation of the mirror in the telescope.
Turn polished bottom banks to the sun. Thus, you will create a perfectly focused ray of light, aimed directly to the clutch. Place a corpet at a distance of approximately 2-3 cm from the focus of sunlight. After a few seconds, the flame should appear.
While I can not imagine what I was somewhere on the edge of the world with a can from under the "cola" and chocolate, but this method of mining fire really works.

Batteries and natural wool

As in the case of a chocolate and a bottle, it is difficult to imagine the situation in which you can be in extreme conditions without matches, but with batteries and pieces of clean wool. But you never know how life will turn. This method is very simple and fun, so you can try it at home.
Stretching a piece of wool. It is necessary that the wool strip is about 15 cm in length and 1 cm in width.
Fuck the battery of a piece of wool. Keep the wool strip in one hand, and the battery in the other. Any battery is suitable, but the optimal power is 9 W. Sodium side of the battery with "contacts" of wool. Wool will flame. Easy to run on her.
Frames hot wool on a clutch. Wool will burn for a long time, so stopping!

The burning match is one of the oldest and most reliable ways to make fire. Matches create fire due to friction on the impact surface ("grater"), which lights flammable fuel. Since matches are the easiest and safe way to light fire, knowledge of different ways to burn them can be a useful skill if you have to face unfamiliar types of matches. Having mastered the basic ignition skills, you can also learn, something else can be clarified by match, except for a matchbox to achieve the desired effect (fire).

Steps

If you already know how to heal the matches and want to learn anything more interesting, click here.

Wooden matches

Tight take the match for the middle. Use index and thumbs and keep the match for the lower part of it. You can neatly crush your other fingers around the base of the match for greater confidence.

• If you light the match for the first time, you still have to practice with ordinary wooden matches in the box. Having mastered the basic skills, you can go to paper matches and "self-igniting", which can be set fire to everywhere.

1. Press the match of the match to the grater without moving it. Tyrka is a red or brown rough strip on the side of the box, and the middle of the match is the painted end of a wooden stick. Keep the boxes in your hand that do not hold the match.

   Quickly spend the cat's head. Without reducing the pressure on the match, swipe it from one end of the rough strip to the other. This movement should be rapid and hard. Imagine that you are trying to label the cat's head in the grater. If you do it right, the match of the match will immediately ignore, so do not panic when it happens!

   • The exact pressure that you must have on the match varies from match to the match and from the box to the box - in one word, it is simply not. In captured, you get used to putting on a match not so much so that it breaks, and not so weak so that it does not get buried at all.

2. If necessary, repeat your actions. Not all matches flash immediately. Do not be discouraged if you did not work: just turn the match on the boxes until you get the desired result. Press a little stronger if you think that for the first time you chirped too softly.

   Keep a burning match at a distance from the box. You will understand why, when you burn your match: it will immediately begin to smoke and flares; So keep the match for its far end to protect your fingers from the flame and use it in the purposes you need. If you do not remove the match from the box on time, it will just burn.

   • Want to know how to use a match with maximum efficiency? Click here.

   Paper matches

   1. Gently tear off one match from the whole block - paper matches are almost always produced by a small block: a piece of compressed cardboard with special divisions and hand-treated matches.

      • Paper matches burn a little harder than ordinary wooden, but their insight is still easy to master. Do not worry if you cannot immediately find a way acceptable to you, in this section - it is.

   2. Put a match to the grater. There are several ways to light a paper match, but the easiest only slightly differs from the way of burning a wooden match. Tyrka on a box of paper matches is usually rear or inside, not on the side. You need to put a match on the grave: the head must lie in the middle, and the end of its base is slightly fond of the border box.

      Cover the match with a lid box. You must only see the topping tip of the match. Follow the match head under the lid box. Keep here, gently pressed on the matches through the cover with a thumb.

      • Try to fully cover the match with a lid box. If the nude edge of the match head flaps under your fingers, you burn them greatly.

   3. Squeeze and pull! Grasp the ending end of the match with a free hand. The other hand slightly press on the match the match through the cover. One rapid movement is taping stronger on the match of the match, while pulling it out with the other hand. If you do everything right, friction of the head of the match about the cooler will inflame it when you pull it out.

      • Like a wooden match, paper may not light up in spite of all your attempts. Be prepared to repeat your actions several times. If there is no result, try turning the match with another end of the head to the grater.
      • Be careful - if you squeeze the match too much, you will tear the match head, lighting it. It will make a match already unacceptable for use, so try to avoid it.

   4. You can also light a paper match without pinching it between the cooler and the lid box. It will be a little more difficult for newcomers, because in this case the risk of settling your fingers instead of a match more, but this method is much faster. To try, follow the steps:

      • Keep the match correctly: big and middle fingers. Put the index finger on the back of the match head.
      • Click on the head with the index finger and spend it along the grater with one rapid movement - it's hard as if you light a wooden match.
      • As soon as you notice that the match is lit, remove your index finger from the flame or take the match into another hand. You have to do it quickly, so as not to set yourself up.

      Tricks with matches

      1. For a better result, use "self-begging" matches for these tricks. You do not have to use included in a set of graves for the ignition of many of them - you can successfully chirk them almost about all the dry surfaces. However, it is simpler: they are specifically made to ignite from friction about different surfaces.

         Try set fire to the match from the stone. Tourists and travelers are required to be able to improve their survival skills in adverse conditions. For the best results you need to find a flat dry stone with a slightly rigid "grinding" surface. The texture should be similar to the concrete of the sidewalk. As already noted above, the stone should be dry. If you can not find a dry stone, find a comfortable wet stone, wipe your clothes and donate in your pocket for several hours or leave it somewhere cool.

         • Keep a match between medium and thumbs and press the match the match to the stone with the index finger. This technique looks like a paper matches without covering it with a lid box. The stronger the surface of the stone, the less you need to put on the head of the match during friction.

      2. Try to light the match about hard building materials. If you are still in a civilized world, but you don't have a cochetic box at hand, as a last resort, you can use the materials that you have at hand. Just twist the match as if you use for this boxes, less than the mature, if the material is hard. However, it is very important that the material is dry. You can use the following surfaces:

         • Concrete
         • Stucco (between tiles, etc.)
         • Brick
         • Ceramics
         • Remember that chirkage matches can leave small marks on the material you used, so you can not always do it with strangers.

      3. Sandpaper. This trick is convenient when you stay without a box in the garage or workshop. Already used sandpaper acts best - hard sandpaper may erase the match of the match instead of freeing it. Just put a piece of sandpaper on a flat surface, press the match of the match to it and turn on it, as in the grater.

         • Never burn matches next to a dry wooden chips (which is often found there, where and sandpaper). This flammable material can cause a fire.

      4. Try gently light match about your zipper. This is a wonderful trick for a party, but it must be done very carefully to avoid injury. Bring the lightning (on the pants or on the jacket) and make it so straight and flat as possible. Take a match in your free hand, press to the top of your zipper and shit down, slightly pressing it. This is a pretty trick, so do not be surprised if you need a lot of time to teach it.

         • Always Chink towards the floor, and not to your face. So, if you lose control of the match, it will fly to the floor, and not to you on a T-shirt.
         • Try this trick only if your pants are made of strong, fine material (for example, jeans), which is unlikely to ignore. Do not attempt to perform it in shorts or in open shoes.

      5. Try set fire to the match from the window. Surprisingly, even perfectly smooth glass can light match. You will need to make a lot of power in this case, so put the index finger directly on the match of the match: so you can press it with a greater force. Press the head list to the glass, then one rapid movement, turn down the match down, keeping the hard pressure on it. Remove the index finger from the burning match head so as not to be hurt.

         • This method can leave stripes on the glass, so you should not do it where many people can notice it. However, bands are usually erased from glass without problems.

      6. If you want to experience the thrill, burn the match about your teeth. This trick accurately attracts a lot of attention to himself, but do it only if you are sure that you do not damage yourself and the rest. First, make your front teeth as dry as possible (a clean cloth or paper towel). Then, press the tip of the head of the match to the teeth and take them about them with moderate pressure. Immediately remove the match from the face, even if you are not sure that they lit it. Rinse your mouth with water after the trick.

      How to keep a burning match

      Keep a match slightly at an angle to continue to burn. The main rule - the fire applies faster if he is where to "climb". This is truthfully even for small scales. The more match is tilted to the floor head, the faster it burns to the base.

      • The correct angle of inclination makes the flame burn brightly and not "climb" to your fingers too fast. You can always change the angle of inclination of the match if you need more time than you assumed.

The burning match is one of the oldest and most reliable ways to make fire. Matches create fire due to friction on the impact surface ("grater"), which lights flammable fuel.
There are different situations in life and sometimes it happens that you have matches, but there is no box, about which they can be lit ...

It turns out that you can set fire to a friend! It is only necessary to get four matches to take four matches, and then apply the head of the fifth matches on them. Thanks to the friction of the coated gray heads, the spark will arise and the self-burning will occur.

About how to do it - look in the video. Of course, a certain skill will be required. For example, I have "mined" the fire, the floor made a box of matches :) ...

At different times, a wide variety of matches appeared. The Romans were focused on the raysin coated with gray with a magnifying magnifying glass and sunlight. The Chinese have impregnated with wooden sticks with gray, and they flammped from the glowing cloud. In France, a mass of bertolen salt, sugar, resins and sulfur was applied to the base, which was fixed with the help of viscous glue and the resin of the acacia tree. Some experiments were explosive.

Over time, matches began to cover the mixture into which phosphorus was included. It is thanks to it that the ignition process became safer, the substance weakened the explosive properties of the mixture. But he had a bad effect on the health of the workers and, although he did not explode, but flammped at low temperatures. To transport such goods has become unsafe.
The problem was solved by the opening of a red safe phosphorus, which began to use instead of a poisonous white. The stick itself is made of soft wood species, often from the waste of the woodworking industry. Lipa, pine, poplar or aspen goes into move. Special types of matches are made of cotton harness impregnated with paraffin (then dried to a solid state), and even from cardboard.

Traditional matches according to the rules should be lit on a special surface. This is usually the sidewalls box to which a special mixture is applied, which mainly consists of phosphorus and sulfuric antimony. If there is no box at hand, you need to come up with another way of ignition.

What else can you clarify the match, besides the matchbox to achieve the desired effect (fire)?

In order for the match caught fire, a minor amount of heat is required.

Look for a rough surface, heat the head of the match by friction. But this method has its own characteristics. Found the uneven surface should be fine-grained. Otherwise, all chemicals will fall from the match the match, no fire will appear.

Metal surfaceb is the perfect option for friction. For example, an ax, hammer, a knife blade can be used to warm the match head.
There are three developments of events:

• the match will light up;
• it will break;
• a chemical composition flies with a wooden basis.

In order for the situation to be resolved in your favor, you need to act quickly, but neatly. The force with which you will perform friction should not be too big.

Try to light the match about hard building materials.
If you are in the civilized world, but you do not have a grain box at hand, as a last resort you can use the materials that you have at hand. Just twist the match as if you use for this boxes, less than the mature, if the material is hard. However, it is very important that the material is dry. You can use the following surfaces: concrete, plaster (between tiles, etc.), brick, ceramics.

If you stay without a box in the garage or workshop, then skidka will help sandpaper. Already used sandpaper acts best - hard sandpaper may erase the match of the match instead of freeing it. Just put a piece of sandpaper on a flat surface, press the match of the match to it and turn on it, as in the grater.

Tourists and travelers are obliged to be able to spiculateIf they want to improve their survival skills in adverse conditions. For the best results you need to find a flat dry stone with a slightly rigid "grinding" surface. The texture should be similar to the concrete of the sidewalk.
As already noted above, the stone should be dry. If you can not find a dry stone, find a comfortable wet stone, wipe your clothes and donate in your pocket or leave it somewhere to succeed.
Keep a match between medium and thumbs and press the match the match to the stone with the index finger. Click on the head by the index finger and spend it in a grater with one fast movement.
The stronger the surface of the stone, the less you need to put on the head of the match during friction.

Try gently light match about your zipper. This is a wonderful trick for a party, but it must be done very carefully to avoid injury. Bring the lightning (on the pants or on the jacket) and make it so straight and flat as possible. Take a match in your free hand, press to the top of your zipper and shit down, slightly pressing it. This is a pretty trick, so do not be surprised if you need a lot of time to teach it.
Always Chink towards the floor, and not to your face. So, if you lose control of the match, it will fly to the floor, and not to you on a T-shirt.
Try this trick only if your pants are made of strong, fine material (for example, jeans), which is unlikely to ignore. Do not attempt to perform it in shorts or in open shoes.

Try set fire to the match from the window. Surprisingly, even perfectly smooth glass can light match. You will need to make a lot of power in this case, so put the index finger directly on the match of the match: so you can press it with a greater force.

Press the head list to the glass, then one rapid movement, turn down the match down, keeping the hard pressure on it. Remove the index finger from the burning match head so as not to be hurt.
This method can leave the strip on the glass, which usually erase with glass without problems.

Five more ways to light the match without a box:

In addition to the above methods, you can add another one: set fire to the match simply from the gas stove, from the teda of heating devices or using sunlights passed through a magnifying glass.

How to keep a burning match

Always turn the match from myself. Do not hold a burning match close to yourself.

Keep a match slightly at an angle to continue to burn. The main rule - the fire applies faster if he is where to "climb". This is truthfully even for small scales. The more match is tilted to the floor head, the faster it burns to the base.

The correct angle of inclination makes the flame burn brightly and not "climb" to your fingers too fast. You can always change the angle of inclination of the match if you need more time than you assumed.

Keep a match at a small angle if you need a very large flame. If you need it as quickly as possible, keep the match directly (base to the ceiling) second or two. The flame spreads up very quickly and will be greater than when the match is tilted. Nevertheless, this flame will also be hot and closer to your fingers, so be very careful.

Try to avoid strictly vertical match position (base to the ceiling). There is a big chance that you burn your fingers or arrange a fire without holding a hot match.

Keep the match directly (base to the floor) for a small flame that will quickly go out. The flame will become smaller and will burn less, as the fuel on the match head is limited. The flame can slowly get down to your finger, and can extinguish itself.

Remember the wind. Light the match outside the house very neatly in windy weather. The wind can easily blew your match. Ignore matches in a windless place or wait until he subsides.

If you need to light the match in the wind, you can turn the match from the wind by the body, putting back to it, or hand.

And remember: matches are not a toy!

Tips for all occasions.