How to age white paint on wood. Effective ways to age wood surfaces. Prices for various types of wood stains

The aging of wood is gaining more and more popularity among lovers of antique furniture. Russian manufacturers have noticed this trend. Many large factories in the Russian Federation have special lines that produce furniture using the technique of brushing or artificial aging. Not everyone can afford such furniture, but even fragile female hands can turn wooden boards into an old masterpiece at home. Today we will get acquainted with 4 methods of artificial aging of a tree and learn how to use them in everyday life.

Brushing - parsing the basics of a popular technique

Take a wooden board, place it in front of you. What do you see? Wood pattern. Each breed has its own unique pattern, which consists of a combination of light and dark lines. They are created over the years as the tree grows. In winter, dark fibers with a dense structure grow, and in summer, soft light tones. Under the influence of moisture, sun, wind and weather conditions, the soft layer with light fibers is gradually erased, the board acquires an antique look. It will take decades to achieve the natural aging effect of wood. Fortunately, there is a quick and easy brushing procedure. As a result of thermal, chemical and mechanical action, the wood acquires a convex texture with worn edges and chips, characteristic of a "living tree" with a century of history.

The brushing technique comes from the English word "brush", which means brush. A metal brush is really used for aging. However, this is not the only tool that allows you to achieve the effect of an antique wood.

After combing with abrasive materials, the wood is covered with paint or stain, and opened with varnish. Paints and varnishes emphasize the new texture and extend the life of the wood. Standard paints can be combined with shades of bronze, gold, silver. To achieve the maximum effect, it is important to choose the right wood. Suitable for brushing are such wood species as larch, merbau, wenge, alder, ash, oak, metoba, kempas. Spruce and pine look especially good in this technique. But beech, maple, teak, juniper, birch, alder, pear, cherry are unsuccessful examples for brushing. After processing, the drawing should be expressive and not merge, which cannot be achieved with the above breeds. So pay attention to the peculiarity of the pattern. The more expressive it is, the more interesting the result will be. The presence of chips, grooves and knots on the surface will be an additional advantage. Depending on the chosen method of brushing, it takes from several hours to days to work.

What to age in the interior - we understand the issue in more detail

Aged wood in the interior is the main attribute of country and Provence style. It creates a rustic, suburban atmosphere in the house, close to nature. To emphasize this style, the brushing technique can be applied to the following interior elements:

• "pot-bellied" or regular chest of drawers;
• window sills and doors made of natural wood;
• solid wood for flooring and wall cladding;
• floor beams;
• backyard benches;
• shelves, tables, chairs;
• log cabins for wells;
• fences made of wood.

Natural wood with aging effect goes well with other natural materials (stone, leather, metal). Brushing is often used by craftsmen who create handicrafts. Here are a few more ideas from this series: designer lamp, notebook with rough leather and wood trim, wrought iron garden furniture

Method number 1 - metal brush and translucent glaze

The simplest way to age wood is to use a stiff metal brush with a handle. After intensive movements on the surface of the wood, the texture of the material appears, which is then emphasized by the finish. Before aging the wood, sand the surface with 150 grit sandpaper. Then take a metal brush and sweep it along the grain line until characteristic stripes and bulges appear. It should be noted that the manual process of brushing with a brush is lengthy, so be patient. Intense movements have borne fruit, the soft fibers are removed and the texture appears on the surface. Remove the resulting wood shavings with a soft brush, not by hand, otherwise you can drive a splinter.

The tree is transforming before our eyes. To emphasize its relief, cover the surface with 2 layers of translucent glaze. Such material already looks attractive. After a couple of minutes, remove the extra layer of glaze with a sponge and open the tree with varnish. If it seems to you that something is missing, you can do it in the Provence style. Use a white glaze after the first coat of the translucent glaze. Remove fresh glaze with a sponge after 3 – 5 minutes after application in a chaotic manner. The final stage is coating with varnish or transparent glaze.

A simplified option is the use of a metal brush and white glaze. We go over the surface with a brush, cover it with white glaze and again, after drying, comb off thick areas with a brush finish. Thanks to this simple method of wood aging, a whitewashed board with a slight perennial bloom is obtained.

Method number 2 - multilayer staining

To age wood for real antiques, you need to work hard. One way to do this is with multi-layer staining. We will find out what is needed for this a little later, but for now we will work a little on the wood by hand. Take an awl, hammer, file, screws, rods and leave a mark from each tool. Small chips, cracks, scratches and abrasions will give the naturalness of antiquity. The main thing is not to overdo it.

Now let's move on to paints, you will need:

• primer for wood Pinotex;
• tint paint;
• white glaze;
• white spirit for dilution.

For the first coat, take Pinotex Wood Primer and spread it over the entire surface. The Pinotex primer is thicker than the glaze. It is used when it is necessary to create a thick base layer. After the first layer has completely dried, apply tint paint (antiseptic). We wait until everything is dry and move on to the next step. We take fine and coarse sandpaper, a metal brush. We work alternately with all the tools, creating a natural touch of time. Next, take a white glaze, dip a brush into it, remove the excess and distribute over the wood. No need to apply the glaze tightly and evenly. The lower dark layer should be visible through it. Again we take a metal brush and walk over the dried surface, creating more visible gaps. This aging of wood looks contrasting. To bring it closer to natural, the next layer needs to be made more muted. This will be achieved by diluting the white glaze with white spirit in equal proportions. Apply the diluted mixture to the surface and wait for it to dry completely.

Method number 3 - an electric drill with a nozzle and paint-varnish

The mechanical method with a manual brush is reliable but time-consuming. To age a tree with your own hands quickly, use an electric drill or grinder with a nozzle made of hard nylon fibers. We start work with the preparation of wood. Take a hand planer and cut notches around the edges of the material. We do not recommend using the electric version of the tool, the result will look unnatural. Before proceeding to the next step, put on goggles and a respirator to protect the mucous membrane of the eyes and nasopharynx from wood chips. Thick gloves won't hurt either. Take a drill or grinder, put on a stiff-brush attachment, and practice on a small area of ​​the tree. Move strictly in the direction of the fibers, do not press the nozzle too tightly against the surface. If you are sure you are ready, skip to the main part. Move along the wood with light movements, remove soft fibers.

To speed up the process and intensify artificial aging, you can burn the wood with a gas burner before starting work with a drill or grinder. It is important not to hold the burner in one place for too long to prevent the resin from igniting.

If you do not use fire to process the wood, then after using the power tools, moisten the board with a brush and let it dry for 2-3 minutes. Next, sand the surface with fine-grained sandpaper, collect wood dust. It is better to do this with a vacuum cleaner to completely exclude drifts from getting under the skin, or thoroughly walk over the surface with a soft bristle brush. Holes 1–2 mm deep with a blunt nail can be drilled into the board before finishing.

The last stage is coating with paints and varnishes. Use paint and varnish of your choice. Advice, so that the artificially aged tree looks as realistic as possible, paint the recesses in light shades, and the convex parts in darker shades. If you decide to paint the board in one light shade, sand the surface after drying to reveal the dark details. After finishing the work, we fix the finish with varnish. To enhance the result, instead of the usual varnish, you can use craquelure. After drying, it cracks, the bottom layer of paint is visible in the voids.

Method number 4 - exposure to fire and a stiff brush

Aging wood with a gas torch or blowtorch is widely used by artisans who want a deep effect. In addition, this is a quick option, which, depending on the use of additional tools, has its own characteristics.

If you just want to emphasize the texture of the wood, do not pre-treat the surface. Burn the board with a gas burner in some places or completely, and then walk with a fine-grained sandpaper. But pre-treatment will help to make the surface more convex and embossed. Remove soft fibers by hand using a metal brush or walk around with a drill with attachment. Conduct firing. After processing, such wood looks noble and more advantageous than the previous option due to a deeper effect on the material. Also, a special effect is obtained when the material is completely burned with a gas burner and then processed with a hard hand brush.

When working with fire, remember: you should not bring a gas burner or blowtorch close to a tree. Do not hold the device in one place for too long, work at an accelerated rate to avoid fire and be sure to follow safety precautions. Before starting work, put on heavy gloves, a robe, goggles and a respirator. After cleaning the surface, cover it with varnish.

Beautiful aged furniture can bring sophistication and harmony to your home. Under natural conditions, the tree grows old under the influence of various natural factors - wind, rain, sunlight, etc.

But it is not at all necessary to wait a couple of decades for the purchased headset to acquire such a unique look. You can use special technologies for aging wood.

The benefits of aged wood

Antique furniture looks elegant and stylish in any interior

Aged wood is a beautiful, durable and functional material from which various pieces of furniture are made: tables, chairs, beds, dressers, etc.

The advantages of aged wood are as follows:

• The surface does not require special processing, if desired, it is enough just to varnish it.
• The aging effect allows you to give any piece of furniture an antique look.
• Natural wood grain looks unique and unrepeatable.
• Aged wood furniture will look harmonious in any interior.
• This material is environmentally friendly and anti-allergenic.
• Aged wood is reliable and durable.
• Finally, furniture made from this material will never go out of style.

What types of wood are best for aging?

For aging, soft wood or medium-hard material is suitable. It has a brighter texture. Spruce, larch and pine meet this requirement. The presented breeds differ in that they have soft fibers. In the spring and summer, annual rings form on them the fastest, which makes the fibers "loose". Breeds such as beech and maple are not suitable for aging, as their texture is weak and almost uniform.

Preparation

Before aging wood, its surface must be prepared

Before you start aging wooden furniture with your own hands, you need to carry out high-quality preparation of the surfaces that you plan to process. To do this, remove all defects and dirt. These can be traces of grease and other stains. If this is not done, obsolete contamination will appear after the tint is applied to the wood. Also remove old paint or varnish and remove excess hardware that would interfere with the antique finish.

The ways

When the preparatory stage of the robots is done, proceed to aging. First, decide on the technology with which you would like to age the furniture. There are the following options:

• Coloring;
• Craquelure;
• Surface brushing;
• Stain treatment;
• Processing of wood with special chemical compounds (oldizing technology);
• Application of gilding;
• Achieving a lime effect (lime technology).

Let's take a closer look at each of these ways to age a tree.

Dyeing

Wood aged using the staining technique

If you want your wooden furniture to look shabby, you can use a staining technique. Choose a base tone that will show through the top coat of paint.

For the base, you can use any color, the main thing is that it is more saturated than the auxiliary one.

You can also use a color mixture mixed with white paint and a water base. For the second layer, it is better to use light shades. This combination of colors will allow you to make the effect of burnt paint. After the paint is dry, sand it with a high grit sandpaper. This will remove excess paint. Sanding is necessary until the effect of worn paint appears. The main layer will show through it. The final stage of processing is varnishing.

Craquelure

You can paint the tree with the craquelure technique. Simply put, create the effect of cracks on wooden furniture. You will need a special craquelure varnish. After applying the main color to it, the varnish will crack. The color of the cracks depends on the base chosen. To add originality, you can use several colors at once. Craquelure is a good way to quickly give your wood furniture an antique look.

Surface brushing

Wood aged with the brushing technique

The brushing technology is a simple method of aging wood furniture using a metal brush, fine-grit sandpaper, a chisel and a drill. Before starting the main process, you need to remove the top layer of the wood. Brushing can be combined with surface painting. Use sandpaper and a brush to remove the top layer, and a chisel and drill bit to create grooves and wormholes. The brushing technique is most commonly used to age floors and planks. After completing the main stage of work, cover the surface with oil, varnish or stain.

When decorating wooden furniture, it is important not to overdo it, because luxurious furniture can be turned into junk.

Useful Information: Brushing is great for furniture made from hardwoods such as walnut, ash, oak and larch. This technique is contraindicated for maple, cherry, beech and teak.

Stain treatment

Wood aged with staining

This technique is used in conjunction with others. Coating furniture with paint and varnish material will allow you to achieve the staining effect. First you need to treat the surface, and then wash off some of the stain with a damp sponge. It is important to leave edges, curves and cracks darker than the main surface to accentuate the aging effect.

If, after the first time, you have not managed to achieve the desired result, simply sand the surface thoroughly. Some areas can be re-painted with a brush dipped in stain. To make the color more saturated, after completing the main stage of work, cover the wood surface with a primer or the desired color. Finally, rub over the surface with antique wax using a soft cloth.

Olding technology (processing with special compounds)

Aged wood using the oldizing technique

Olding is a very interesting technique for aging wood. It can be used to recreate the effects of fading, marsh moss, burnout, etc. Special chemicals will help you achieve amazing results. This technique is only suitable for hardwoods (oak, hornbeam, etc.).

This is interesting: If you carry out the oldization of softwood, it will simply become unusable after being treated with strong chemicals.

The final stage will be varnishing the surface. It will serve to protect the surface.

Applying gilding

You can use gold platinum to age your furniture and achieve an antique look. Applying gold plating is one of the simplest procedures that does not take much time. Just paint the furniture completely in the color of your choice and wait until it dries.

Useful information: Gold paint must be applied in a thin layer. Only then will the furniture look perfect after staining.

Laming

Aged wood with the lime technique

Liming is the process of aging furniture using a lime effect. First, prepare the surface, degrease it. Treat the wood with a special pigment or paint. Paints and varnishes will help you achieve any shade and texture. Apply paint along the grain. This will accentuate the natural structure of the wood and add a "clogged dust" effect to the corners. For best results, apply the lime compound with a brush or gauze pad.

Useful information: When choosing a base color, do not forget that after drying it will look a little lighter.

Video. How to artificially age a tree with your own hands at home

Aged wood is one of the fashionable design trends of this season. Using any of the techniques described above, you can easily give surfaces that effect at home. Artificially aged furniture will look harmonious in the apartment and fill it with comfort.

Learn how to age a tree with your own hands in a loft style at home with your own hands and you can use it anywhere in production: for a wooden kitchen, Provence furniture, tables, etc. The result is a wonderful color that will decorate the decor of any home! The use of modern wood in the design is, perhaps, a win-win option.

This is an incredibly attractive, breathable, pleasant to the touch natural material that has a beneficial effect on the formation of a microclimate in a home, has bactericidal properties, and is useful for human energy. Wooden ceiling beams and individual decor elements will look great in any room.

This wonderful material lends itself well to a wide variety of treatments.: it can be left in its natural form, dyed, aged, and much more.

There is no specific, unambiguous answer to this question.

This procedure is carried out for different purposes, most often it is:

How to make a tree old: brushing

There are many different ways to process wood to achieve the desired result. Brushing, or texturing, is one of the most widely used.

The word brush is of English origin, and means a brush. From him came the name of the technique, which consists in using the mentioned object to remove the soft pliable fibers of the material. Quite similar processes occur as a result of natural aging, but in this case they take quite a lot of time. This method is considered the closest to the natural changes occurring with the material.

It gives the wood a distinct woody texture.

What kind of tree can be aged: breeds

It is quite possible to give the surface of a wooden material an aged look with the help of brushing on your own, at home. The problem is that not every type of wood is suitable for this kind of processing.

Maple, cherry, beech, pear, certain varieties of exotic plants do not lend themselves to this aging method.

It is not suitable for products and surfaces made of MDF. What if there is no suitable material available? We'll have to use a different method, a chemical one. Coniferous wood is best processed mechanically.

Brushing is a rather laborious procedure. The main tool for its implementation is an elastic and durable metal brush. You won't be able to quickly change the appearance of the tree with its help, so you can speed up the process.

This will require either a drill with a special hard wire brush.

It should be noted that the use of electromechanical tools for woodworking can be very unsafe. The fact is that during the event, rather strong vibrations occur, which can cause the separation and sharp flying off not only of wooden chips, but also of metal elements.

Therefore, it is important not only to know how it will be possible to age the tree, but also to be able to do it safely, without risking your own health. All activities are carried out in a special protective suit, the eyes must be covered with camouflage goggles or a face shield. The respiratory tract is closed with a special respirator.

Aging chemical treatment

Is it possible to age wood by hand without the use of special devices and tools? You will need coarse sandpaper, with which the surface is sanded. Liquid ammonia (ammonia solution) is applied to the prepared material, from which the tree becomes noticeably darker.

Thanks to this treatment, the wood texture becomes more distinct, while the noble darkening gives the material a touch of exquisite antiquity.

Such processing can have a superficial, rather light character.... In this case, a non-coarse polymer brush is used. If the tree is deeply processed, even the annual rings of the wood become noticeable.

The main thing is not to overdo it when performing this operation. Otherwise, the result of the expended efforts will not be an elegant textured surface, but loose, indefinite wood.

Regardless of the selected processing method, after a rough initial cleaning of the wooden blank, it is necessary to return to its original aesthetics. Irregularities and burrs are carefully removed from the surface of the object, then it is with a special abrasive brush. Then the material is additionally lightened and given a gloss, for which thin sandpaper is used.

Aged wood effect: patina

Mechanical processing alone is not enough to obtain the desired effect of aged wood. What to do with the material next? You can cover the product with one of the types of varnish. The material looks very interesting after special processing - patination. It allows you to make the surface of the material even more embossed. Patina is a peculiar, unique gloss acquired by the material over time.

Recreation of it with your own hands requires a lot of effort, and is carried out in several separate stages. What is the patination process?

This is the application of special stains and compounds to the treated surface. In each case, they are selected individually, in accordance with the desired shade and color of the product.

The compositions should be applied in such a way that they end up in the pores of the wood, which open during mechanical processing.

The essence of this method is to make the deep pores of the material appear contrasting and dark against the general background, lighter. To carry out this procedure on your own, you need to choose a paint that matches the color. The prepared surface is completely painted over with it, and, without waiting for complete drying, part of the top layer is removed with a cloth or sponge. Such wood looks noble and looks like an old one.

But patina is not the only way to get a similar or similar result. It is absolutely wonderful to age products with the help of special enamels. This method will allow you to get a real work of art that looks little different from genuine antiques.

A layer of enamel of a certain color is applied to the surface. When it's dry, it's time for the next stain. For secondary application, you will need a composition of a different shade, and a more liquid consistency.

When the treated rock is completely dry, its surface is easily processed with sandpaper. In some places, the initial layer shows through, forming elegant abrasions.

Toning and varnishing

The patina process must be completed with tinting. For its implementation, you will need special formulations containing resins and natural ones. As a finish, a double or triple varnish coating of treated wood is used. After drying, the surface is treated with a soft cloth to give a special shine.

Such varnishing fixes all previous manipulations, gives the product a finished, complete look.

And although the process is quite complicated and time-consuming, everyone can master the art of working with wood.

The main thing here is to carefully study the technology, understand the sequence of stages, and strictly follow the instructions.

Secrets of good brushing: how to age wood

How to correctly conduct the brushing process so that the result is pleasing to the eye? You need to know some of the nuances of the process.

Aged wood: interior use

Wood treated in a special way can not be found in every home. The fact is that it is not enough to simply age the wood.

The ability to correctly use it for interior decoration is of great importance. But the use of the described brushing method allows you to make completely unique products, in fact, exclusive.

These can be individual pieces of furniture, or whole sets and headsets.

Chests of drawers, candlesticks, bookshelves, antique sideboards, frames for mirrors and paintings, country furniture and kitchen sets look especially interesting. This way of processing wood is perfect for the manufacture of individual doors and partitions.

The wood brushing method is excellent for adding a special effect to flooring and parquet boards. Often, such material goes to the author's decoration of the walls of saunas or home baths, billiard rooms, retro cafes, bars and non-standard premises.

Various methods of wood aging technology are not a secret today. Tossing- not the only method, there are others. Between themselves, they differ in the amount of time required for the implementation of the process, as well as in the complexity of the technology. But no matter what method is used to achieve the desired effect, in any case, aged wood is capable of creating a completely unique atmosphere of warmth and comfort in any room, ennobling the interior with the refinement of antiquity.

How to make an aged tree at home and give it a vintage look with your own hands? This article is devoted to just such tricks! Artificially aged things look very stylish and harmonious!

The 7 paint aging methods we will look at here are interesting for their simplicity and great end result. They also do not require the purchase of any expensive special materials or tools.

We will analyze in detail the following 7 painting methods:

This is a versatile technique that can help give wood or wood furniture an antique look. It can be used on untreated wood as well as on already painted wood and furniture. Suitable for painting in one or more layers.

For example, this is the result obtained when painting with this method in white (for a detailed guide, read the article "")

Let's take a closer look at how to paint a tree using this method, making three layers (brown, white and yellow).

Necessary materials:

• paint (brown, white and yellow)
• brush, candle, rag.

Step-by-step instruction:

Step 1: First coat of paint

1. Decide on the color of the paint that you will take as a basis. This will be the first, bottom layer of paint that we will apply directly to the wood. In this case, we use a dark brown color.
2. Paint the wood with slightly random strokes, without painting the surface completely and evenly.
3. Leave to dry completely.

Step 2: using a candle

Take a candle and rub it on the surface of the tree in several randomly selected places(at the same time, press quite hard on the candle so that a clear trace of wax or paraffin remains on the tree).

• Step 3: second coat of paint Pick a color for the next coat and paint it on (we'll use white here). At this stage, the paint can be applied evenly over the entire surface, and not with strokes, as with the first coat. Leave to dry completely.
• Step 4: Then take a rag and wipe the surface with some pressure. In places where wax has been applied, the paint will lag behind the surface. If two layers are enough for you, then you can stop at this, and if not, follow on.
• Step 5: third coat of paint Repeat steps 2 and 3, but the last one using a different paint color (here it will be yellow). After the paint is dry, a protective varnish can be applied. The latter is not necessary due to the fact that we deliberately gave an antique look, so if the paint starts to lag a little over time, this will not be noticeable.

2. Aging using wet paper

This method of giving wood the texture of aging is similar to the previous one with candles, only now instead of wax there will be wet paper(if candles were suddenly not found at home, then everyone certainly has paper).

Necessary materials:

• dye,
• brush, paper,
• a bowl of water.

Step-by-step instruction:

1. Step 1: Fix the wet paper. The base paint was not applied here so that the natural color of the wood was visible. Therefore, we immediately take a sheet of paper, tear it into uneven pieces of different shapes and sizes. After that, dip each piece in a bowl of water and place it on the wood you are going to paint.
2. Step 2: Apply paint. Having laid out all the pieces of paper, immediately start painting in the selected color, that is, you do not need to wait until the paper dries.
3. Step 3: paint stripping Then, carefully lift each piece of paper off the surface. You can do this while the paint is still slightly damp or after it has completely dried.

You can make multiple layers, for example, as in the previous method. To do this, follow the step-by-step instructions there, replacing the wax with damp paper.

3. Texture with a dry brush "Loft"

This technique is great for creating an old and scratched look. The key to success here is just using a very dry brush. For example, old, stiff-bristled brushes work well.

Necessary materials:

• stiff bristled brush
• water-based paint.

Instructions:

This is how the process looks like:

1. Dip the brush in the paint of the chosen color and leave as little paint as possible on it.
2. Apply paint in quick strokes in different directions. Be careful not to get carried away over the entire surface.

This technique is also suitable for painting with the metal effect of a loft, for example, for creating such artificial zinc letters.

You can also combine this method using sandpaper to remove some of the paint after each coat.

4. Painting with scrapers in the Provence style

The result will be about the same as using sandpaper. The difference is that sandpaper not only removes some of the paint, but also evens out the surface of the wood if there were irregularities in that place (which is not suitable if you want to preserve the structure of the wood, leaving it as natural as possible). The second difference is that sandpaper is used only after the paint has dried.

Necessary materials: brush, paint, scraper (or any unnecessary plastic card).

Instructions:

1. Paint the tree first.
2. After, how the paint will dry a little(not completely dry, literally a few minutes, when the coating is already formed, but still sticky to the touch), take a scraper or old plastic card and scrape off some of the paint in some places.

ADVICE: If you paint furniture, then scrape off the paint on the corners and edges, because this is where it most often peels off during use. Thus, the effect of antiquity will look more natural.

5. Rinsing method

This method for creating an aged wood effect is suitable for elegant rustic or Provence style furniture. It is best used on raw wood.

Necessary materials:

• paint, brush,
• water, rag.

Instructions:

• Apply a coat of paint and leave to dry for a few minutes (as in the previous method, so that it is still sticky and not completely dry).
• Then quickly rinse the wood with water gently wiping the surface with a rag. The goal is to wash off some of the paint on the surface. Leave to dry. That's all!

For example, a table painted with a gentle green color looks just wonderful after applying this method.

6. Method of painting with wooden blocks

This is a simple method that allows you to age wood or furniture using a piece of wood.

Necessary materials:

• paint, brush,
• wooden block.

Instructions:

• Dip the end of the block of wood into the paint and run it along the surface to be painted.
• Apply as many colors and layers as you like.

Here, for example, we made one layer of light blue paint.

7. Paint filling method

This is a one step method suitable for all types of wood with a lot of surface texture.

Necessary materials: paint, scraper (or plastic card).

Instructions: You just need to pour some paint on the surface of the wood and smear it with a scraper. Wait for it to dry and you're done!

After we have covered all 7 methods for painting wood with an antique effect, I would like to highlight a few basic tips that you can apply to all methods:

• If the surface you intend to paint is has been treated with a sealant, wax or varnish, it would be better polish it a little to make the new paint work better.
• Feel free to experiment: you can mix and match these techniques as you see fit to create your own personal design style.
• At first practice on some piece of wood or on less visible areas of furniture (for example, on the inside of a painted cabinet door) before working on more visible parts.

And remember that the main thing here is your desire! Good luck!

Things that have been artificially aged look very stylish and can transform any interior. Therefore, the cost for such pieces of furniture can be quite decent. In order to save some money and let you decide what kind of your furniture will be, we offer simple techniques that allow you to age wood using paint with your own hands.

Using damp paper

This is a versatile and fairly simple technique that can easily give wood an antique look. You can use the wet paper aging technique on both untreated and painted wood.

For work you will need:

• dye;
• paper;
• brush;
• a bowl of water.

First, tear a piece of paper into freeform pieces. After that, moisten them with water and arrange them in random order on the wood.

The next step is to paint the wood in your chosen color. This should be done immediately after spreading the damp paper, without waiting for it to dry.

After the paint is dry or dry completely, you must carefully remove all pieces of paper from the surface.

Paint fill method

A fairly simple method that can be used to transform any kind of wood with textured surfaces.

For work you will need:

• dye;
• scraper or plastic card;

The essence of this method is that a small amount of paint is poured onto the surface of the wood and smeared with a scraper.

With a candle

Aging a tree using a candle is a very simple task. To do this, rub the surface to be treated with a candle in arbitrary places so that visible traces of wax remain on the wood. After that, the surface of the wood is painted with paint and left to dry completely. The last step is to forcefully rub the wooden surface with a rag, as a result of which, in those places where wax was applied, the paint will lag behind, creating a scuffed effect.

Dry brush method

As a result of using this method, you can get furniture that looks old and scratched, but at the same time incredibly stylish. Simply dip a stiff bristled brush in a small amount of water-based paint and apply the paint in quick strokes to the surface of the wood.

Using a scraper

Using this method, it is necessary to paint the surface of the wood and, literally a few minutes after painting, while the paint layer remains sticky, scrape off some paint with a scraper or a plastic card.

Rinsing method

Ideal for elegant Provence furniture. Apply a layer of paint and, without waiting for it to dry, wipe the surface with a damp cloth, as a result of which some of the paint will be washed off, and you will get a designer item.

Using wooden blocks

The method involves dipping a block of wood into paint and using it as a paintbrush to paint the surface.

Grinding technique

The easiest way to age wood. This technique is suitable for both painted and unpainted wood. The point is to sand individual areas of wood furniture with hard sandpaper.

When working with wood, feel free to experiment and mix up the techniques described above. We also recommend that you try the chosen method on a separate piece of wood or the interior of the furniture before you start transforming your furniture.