Basic drainage trays (drainage). Linear drainage. S'park and Basic series (standard) Trays for storm drainage

The Standardpark company is a large manufacturer of surface drainage systems. The drainage tray is one of the key elements of the linear drainage system, the purpose of which is collection and disposal surface waters. The top can be covered with drainage gratings and reinforced with steel plates. The grate protects the channel from clogging and ensures the safe movement of vehicles and pedestrians. U-shaped metal linings protect the sides of the gutter and extend their service life.

Depending on the magnitude of the withstand load on the surface, drainage trays belong to the following classes according to EN1433: A15 (up to 1.5 tons), B125 (up to 12.5 tons), C250 (up to 25 tons), D400 (up to 40 tons), F600 (up to 60 tons), E900 (up to 90 tons).

Varieties

In assortment different types high-quality channels for drainage. The classifier can be:

1) the width of the hydraulic section, which determines the productivity of the channel: from dn 100 (100 mm) to dn 500 (500 mm);

2) tray material:

• fiber-reinforced concrete (glass fiber reinforced concrete) – generally accepted a budget option solving the problem of water disposal;
• polymer concrete: increased strength, reliability;
• plastic: ease of transportation and installation.

3) class - determines the installation location of the product depending on the use of the territory, the level of load on the surface, the activity and type of traffic, and the amount of wastewater discharged.

• Basic– installed in places with low passenger traffic, near private buildings, in pedestrian areas, etc.;
• Drive– drainage trays with gratings (type of fastening – bolted) and reinforcing linings with embedded anchor. Designed for city streets, gas stations, underground and surface parking lots, areas with the ability to withstand loads of up to 40 tons;
• Max– reinforced series channels with cast iron gratings and reinforcing linings that can withstand weights of up to 90 tons. Installed at industrial facilities, airports, highways, etc.

4) the presence of an internal slope:

• with internal slope;
• standard, without internal slope.

5) type of further diversion:

• in vertical design;
• in horizontal design.

What will help you choose a drainage tray and related products

7 rules for installing drainage gutters with different capacities

Rule 1– select a tray according to the throughput capacity, based on the average monthly precipitation in your area, increased by 25%;

Rule 2– based on the location of the channel, select best option its design and the material from which it is made. Of course, the curb tray is not suitable for installation on airfields due to its strength characteristics. At the same time, a gutter adapted for heavy loads is not suitable for the installation of storm drainage systems in private farms, based on economic calculations);

Rule 3– permissible slope linear meter structures - 10 millimeters;

Rule 4– the tray is mounted on a minimum 10-centimeter sand and gravel bedding, or on a 10-centimeter crushed stone base. Similar solutions will allow minimizing the destructive impact on the structure of icy soils due to heaving deformation;

Rule 5– it is recommended to install gratings made of of stainless steel, since their weight is much less than their cast iron counterpart, which simplifies the installation process. In addition, such trays are more durable than modules made of gray and ductile iron;

Rule 6– the only protection of your channel from silting is a sand trap, the installation of which is recommended by specialists;

Rule 7– to fix the grid on the tray, it is recommended to use a mechanism with a screw lock.

Video of surface drainage installation

For houses, personal plots and other operational areas there is a constant danger in the form of groundwater and atmospheric precipitation. To ensure the safety of a territory or facility and extend its service life, an effective and time-tested method is used - the construction of drainage systems. Elements of such a drainage system include storm drains.

Target drainage system– prevent stagnation of water and divert storm and melt water from the target object or territory to the designated place - storm drain and water inlet.

Previously, such structures were built of brick. However, when a tray for collecting water appeared, the old method was abandoned. After all, concrete trays for draining water are more economical, and building concrete structure possible much faster. In addition, they are extremely durable - even an earthquake will not cause their deformation or destruction.

Where are concrete storm drains used?

Drainage systems are an integral stage in the improvement of residential buildings, industrial and industrial zones. Therefore, they are built wherever there is a possibility of stagnation of melt water or precipitation:

• administrative and residential areas;
• sport complexes, grounds and stadiums;
• terraces, platforms, sidewalks;
• Technical buildings;
• pedestrian areas, parking lots, roads;
• airport runways, etc.

RainGuard drainage systems are an affordable, modern and practical solution for the collection and disposal of stormwater. Drainage elements are assembled into a single network using a modular principle, forming the required length and configuration for water drainage. RainGuard is divided into three series depending on the place of application, which differ in load classes.

Trays for storm sewer RainGuard are made from different materials, depending on the scope and place of their application: plastic or concrete, as well as special trays with reinforcement in conditions of expected high loads. Concrete, in turn, can be made of reinforced concrete, fiber-reinforced concrete or polymer concrete.

Water drainage tray: which one to choose?

Based on the material used, products can be divided into several categories:

1. Plastic rain tray. Plastic is quite reliable and has long been used to construct drainage system structures, for example, on the territory of cottages or country houses. Plastic trays for storm drainage are easy to transport and install and are lightweight.
2. Concrete trays for storm drainage – classic version during the construction of a storm drainage system. Such trays are made using fiber-reinforced concrete, poured into molds with certain dimensions. It is quite durable and can withstand sudden changes in temperature.
3. Polymer concrete drainage trays are a cross between concrete and plastic products, however, took from them only the most best parameters. When producing polymer concrete products, natural components are added to the material: river sand, granite chips or quartz. If the operating rules are followed, the service life reaches 35 years.

RainGuard drainage systems consist of plastic, polymer concrete and fiber concrete trays, the cross-sectional width of which is 100-500 mm.

Rain tray - what are the requirements?

Sewage trays and other water drainage products are manufactured in accordance with certain requirements. Designs must:

• easily perceive vibrations from the movement of vehicles, both light and heavy;
• be immune to external mechanical damage, such as impact from a stone or glass;
• reliably withstand strong water currents;
• be resistant to change environment and temperature;
• be immune to chemicals in water.

Order trays for storm drainage

The price for drainage trays is determined taking into account their characteristics, capabilities, material of manufacture and the required number of products. On our website you can choose products such as:

• various models of rain gutters;
• related products;
• storm drain

The destructive effects of water negatively affect all types of structures and buildings. The solution to the problem is storm drains that help protect the foundation, road surface And concrete slabs. Installation of storm drains is the main step in the installation of sewerage systems. Thus, water flows are directed to the nearest central or private sewerage system

Typical designs of storm drainage trays

Several types of materials are used in production that are resistant to constant exposure to moisture. Manufacturers offer to buy storm drainage trays made of cast iron, steel, concrete, polymer materials. Depending on the functional purpose distinguish:

• storm gutters, channels, gutters - simple U-shaped structures without covers, the installation of which is carried out in pre-prepared trenches with access to the central drainage point;
• storm gutters with gratings - gutters made according to a standard shape, having a lattice cover along the entire length; the grille serves protective element and retains debris, preventing blockages in the system;
• slotted trays - are a structure in the form of a long gutter with an additional slot for water drainage;
• L-shaped trays, in which there is a protrusion in the upper part in place of the central hole; Installation of storm drains of this type is carried out in industrial or difficult domestic conditions.

The price of storm drainage trays depends on the material used. But there are a number of related factors that influence the final cost of the purchase. The most affordable are concrete storm gutters; their price is acceptable for wide range buyers. But at the same time, due to their large weight, transportation costs increase. More expensive - a plastic storm tray, the price is high, but they are easier to transport, and throughput higher due to smooth walls.

Concrete storm gutters

These are designs that have earned the greatest popularity in urban environments. An example of their use is the flow of water during heavy rain. Concrete trays for storm drainage are made from concrete mixture in proportional combination with reinforcing glass fiber and polymer components. This allows you to achieve the highest strength compared to the strength of products made from pure concrete or plastic.

The price of concrete trays for storm drainage is determined by their parameters, which are selected depending on the scope of use. The length of products can vary from 500 to 4000 mm, the minimum width is 140x150 mm, the maximum is 430x880. Such parameters allow the use of storm reinforced concrete gutters in the construction of complex industrial and urban facilities, as well as in private domestic conditions.

Plastic storm trays

You can buy a plastic storm drain for a private home to equip the sewerage system. In addition, they have found wide application in the installation of railway tracks. The production of such products involves the use of polypropylene with the addition of mineral additives. This combination of materials using the extrusion production method ensures a high degree of strength of plastic trays for storm drainage.

A number of advantages make it possible to distinguish plastic rain trays into a special category and make them in demand in the domestic and industrial spheres:

• resistance to chemicals and aggressive components;
• strength;
• stability under possible mechanical loads (up to 55-60 t/m²);
• possibility of operation in a wide temperature range from -55 to +120 degrees.

The size of a plastic storm drain is standard: length - 1 m, width from 0.14 to 0.5 m, height from 0.06 to 0.79 m, gutter with a diameter of 10 cm. When choosing and purchasing storm drains, it is important to navigate not only on affordability, but also on other parameters:

• carrying capacity taking into account the amount of precipitation in a particular area;
• minimum temperature with possible soil freezing (natural pushing of gutters out of the soil);
• the need to install channels with or without gratings.

The installation of drainage channels is carried out taking into account the maximum load. This is a painstaking and time-consuming process, but longevity and normal drainage depend on compliance with all installation rules.

We invite you to familiarize yourself with the application features and technical and operational characteristics of concrete drainage trays from the manufacturer Gidrolica. Products are made from high-quality polymers that do not contain harmful impurities, and prices are determined depending on the product configuration, hydraulic width and wall height. Trays of regular shape and with a vertical drain are available.

Characteristics of drainage concrete trays

Concrete trays are used for installation in different places, from pedestrian zones and parking lots to sports and large-scale facilities. In the manufacturing process, fiber-reinforced concrete with glass fiber reinforcement and vibrocompression technology are used.

The grille installed on top performs two functions – protective and decorative. Like the product itself, it is resistant to high and low temperatures, therefore it can be used in almost any weather conditions and climatic zones.

How to buy complete concrete drainage trays

Our website contains contact details of all representative offices of the Eurotrading Trade House. By ordering a call back, you can check with regional managers about the cost of concrete drainage trays.

Our advantages:

• advanced technologies and modern equipment are used in the production of drainage concrete trays;
• flexible discount systems;
• various options payment – ​​cash or bank transfer;
• the best prices on concrete drainage trays;
• delivery in Moscow and the region through internal efforts courier service;
• delivery throughout the Russian Federation using various postal services;
• installation by professional specialists;
• consultation on all issues of interest.

Linear drainage systems significantly extend the service life of the road surface and building foundation. They protect the soil from washing out, basements from flooding, the formation of dampness and fungus.

The system consists of drainage trays (gutters through which water moves), storm cast iron grates (protect the trays from household waste, leaves, protect pedestrians from injury), sand traps (retain sand and debris before water enters the underground sewer system).

Surface drainage design

The design of drainage trays with a cast iron grate has simple diagram, so there are no difficulties when installing systems. Their installation does not require large-scale earthworks. It is enough to level the surface of the site and form small slopes on both sides of the channels.

The systems cope with drainage from large areas. Concrete products - perfect solution for places with heavy traffic.

Types of drainage trays

The tray is the main element of the drainage system through which collected water is transported. These unique gutters differ in a number of parameters:

• Material of manufacture. Our website presents plastic, polymer concrete and concrete, as well as cast iron models. Products of the first type are lightweight and easy to install. Concrete and cast iron structures can handle greater loads.
• The diameter of the throughput channel (or the width and height of the gutter). This indicator is calculated at the design stage and depends on the catchment area, rainfall and other factors.
• Load class. Some models are designed for pedestrian areas, others can be used in areas of heavy traffic of freight transport and special equipment.

Drainage trays also vary in configuration. Some models are supplied complete with grille and plugs.

The STEELOT company sells trays and other components for surface drainage systems. The items presented in our store have more than favorable price in comparison with analogues from alternative materials(steel, plastic). At the same time, they are designed for the same load and have equal throughput.

Our experts will tell you about the advisability of using each linear drainage element and advise you to buy the ones that are right for you. Another pleasant aspect of cooperation with us is free delivery within Moscow.

Scope of application

• park areas;
• airports;
• highways and city roads;
• ports and docks;
• car washes;
• playgrounds;
• parking lots and parking lots.