Wallpaper for painting: which is better. Embossed wallpaper on a non-woven base What is structural wallpaper

One of the main advantages of this type of wallpaper is the ability to repaint it many times. For coloring, you can use any water-based paints, unless otherwise specified by the manufacturer. Structural wallpapers hold up to 10-12 layers of paint well, without changing their water resistance.

It can also be noted that rolls can be up to 1 m wide: this is convenient because there will be much fewer joints in the room to be glued. And the length from 10 to 100 m allows you to use wallpaper more economically.

The wallpaper has a chaotic pattern, so there is no need to pick it up. Regardless of the number of layers of paint, the wallpaper remains breathable.

Structural wallpaper on a non-woven base is convenient to use because when gluing it does not need to be coated with glue, it is enough to apply it directly to the wall. Such wallpaper will hide minor wall defects, irregularities and cracks due to its elasticity. Almost any surface can be pasted over with such wallpaper: paper, drywall, plaster, wood, fiberboard, concrete.

Paper backed textured wallpaper has a lower price. They can be with a soft or hard structure, the structure depends on the number of layers of paper. The technology used with the addition of various materials makes it possible to produce wallpapers with different patterns. Wallpaper can be colored or have a snow-white, glossy surface, so you can use such wallpaper without staining.

In addition, regardless of the basis of structural wallpaper, they can be pasted over both walls and ceilings. After painting, the surface can be wiped with a damp cloth from dust and dirt.

Disadvantages of structural wallpaper

The disadvantage of textured paper-based wallpaper is that a pattern is printed on the reverse side, which in turn increases the consumption of glue during pasting. They cannot be used in rooms with high humidity. They are not elastic and are not durable. A special fur roller should be used to smooth the wallpaper. You can paint such wallpapers no more than seven times.

Non-woven textured wallpaper has a higher price than paper-based wallpaper. The structure of the material is thin, so you need to use it carefully so as not to damage the pattern. It must be borne in mind that such wallpapers may shine through prior to staining.

The wallpaper can be with a symmetrical pattern, which will need to be adjusted, due to this, the product consumption will be higher.

The choice of wallpaper for renovation is one of the most important factors, they mainly determine the style, character and atmosphere of the home. There are a great many types of wallpaper material, but today we will talk about non-woven wallpaper for painting, since recently they have become very popular.

In the article we will talk about the types of these wallpapers, their positive and negative sides, methods of application, as well as the choice of glue and paint for repair.

Types and characteristics of wallpaper for painting

Non-woven is a semi-synthetic nonwoven fabric based on cellulose fiber, sometimes with the addition of polyester.

In terms of its properties, it is close to paper, but has improved performance characteristics:

High durability.
Abrasion resistant.
A denser base.
Increased resistance to open fire.
Good moisture resistance.
Not subject to fading.
Not afraid of mechanical damage.
Allows multiple repainting (5-7 times).

There is an opinion that non-woven wallpaper for painting is harmful, you can argue with that! The wallpaper contains cellulose, a material used to make paper. Everyone knows that paper is an environmentally friendly product.

In addition, for soldering the layers and drawing patterns on the canvases, compositions that do not contain harmful substances (formaldehydes) are used. The only risk for people prone to allergies can be dust accumulating on the relief of the wallpaper. But if the canvases are smooth, then even this danger disappears.

Wallpaper for painting is divided into two types:

Non-woven paper-based.

They consist of two or three layers welded together with a polymer composition, the upper one is made directly from non-woven fabric, the rest make up a dense base of glued paper.

Non-woven wallpaper for painting.

In this case, the front side is covered with vinyl, acrylic or textiles, and the inside consists of a non-woven layer.

In appearance, painting canvases are divided into two categories:

Smooth. The front side has a uniform, flat surface.

Structural... A voluminous chaotic or ordered pattern is applied to the outer canvas.

Non-woven wallpaper does not deform after drying, which eliminates the divergence of the joint seams. Since the canvases are quite thick, they are glued end-to-end, the glue is applied mainly to the wall. This method makes it easier to work, and the wallpaper does not tear when ironing.

To increase the strength, a protective moisture-repellent film is applied to the canvases, so the material does not get wet on contact with paint or glue.

How to choose non-woven wallpaper

As we found out, the best option for an interior with plain painted walls can be non-woven wallpaper.

Let's take a look at the parameters for choosing canvases in order to acquire high-quality and reliable material:

Wallpaper type.

Non-woven wallpaper is quite transparent, through which a wall with an uneven color surface can shine through. You can repaint such wallpaper 5-7 times.

Non-woven wallpaper is thicker, they don't care what the previous wall color was. The canvases can be repainted up to 15 times, but as a result it will affect the surface relief.

The thickness of the canvas.

Non-woven wallpaper is purchased mainly for the ceiling or flat walls, since they are lighter, and, accordingly, easier to glue.

The second type is taken for problematic surfaces. If the wall is not perfectly flat and has some defects, then such wallpaper will do just fine. They are denser and will perfectly hide pits, cracks or small potholes in the surface.

The surface texture of the canvases.

The choice of this factor depends on where the wallpaper will be glued. For ceilings, they usually get smooth non-woven wallpaper for painting, and embossed ones are taken for pasting the walls.

Wallpaper color.

Manufacturers offer two types of material: tinted and white non-woven wallpaper for painting. If there is no need to immediately paint the walls, then you can choose the canvases of the desired color, and subsequently repaint them in any other tone.

Material price.

This factor plays an important role when choosing wallpaper, since the cost of canvases is not small. But if you think about the fact that with a high-quality sticker and painting the apartment will not need repairs for several years, then you should not save on the price.

Although now, with a huge assortment and great competition, you can find non-woven wallpaper at a wide variety of prices, and in many stores there is a system of flexible discounts. And, of course, you need to pay attention to the manufacturer, if funds allow, then it is better to purchase finishing materials from trusted companies.

We have given 5 main factors on which you should choose wallpaper of this type, and now we will tell you which glue is best for non-woven wallpaper.

Adhesive selection

We bring to your attention the TOP 5 best types of glue for non-woven wallpaper:

EXCLUSIVE NON WOVEN

The glue contains methylcellulose, modified starch, additives with antifungal properties, has a quick adhesion and good sliding properties, after drying it becomes transparent.

Quelyd "Special non-woven".

It contains bactericidal and antifungal additives, works well with heavy wallpaper, quickly sets, and does not leave marks on the canvas after drying.

Methylane Flizelin Ultra Premium.

The glue has reinforced adhesive components that contribute to better adhesion and is used on all types of wall surfaces.

Pufas EURO 3000 Non-woven special.

Of the five types of the Pufas brand, this adhesive is the most suitable for non-woven wallpaper. Available as a transparent composition, and with a blue indicator. Possesses excellent sliding ability and fast adhesion, after drying it becomes transparent.

KLEO Extra Non-woven Line Premium.

It contains the same modified starch and antifungal additives, good adhesion and excellent adhesion. Especially good for heavy-duty wallpapers.

I must say that all the adhesives presented practically do not leave traces on the wallpaper, which means that even if the glue accidentally hits the front surface of the canvases, they will not spoil the appearance of expensive wallpaper. In addition, the formulations have an affordable price, high quality, economical consumption and clear instructions for breeding.

Many manufacturers for the wallpaper of their brand immediately release a similar glue for them, but if one was not available, then the presented TOP-5 will help you make a choice.

Non-woven wallpaper paint

Since we have non-woven wallpaper - wallpaper for painting, you need to know which paint is best for them.

Three types of paint are used to paint canvases:

Acrylic water dispersion.

All types have excellent air permeability ("breathe"), easy to apply, economical, UV resistant. But if the water emulsion is less resistant to abrasion and is easily washed off with water, then acrylic and latex ones have excellent strength and water-repellent properties, they can even be washed with neutral agents.

Therefore, the first type is used mainly for painting ceilings and walls in dry rooms, and the second and third are used in any room, even bathrooms. The advantages of these types are the absence of an unpleasant odor during staining, quick drying and high environmental safety, they can be used in kitchens and children's rooms, as well as in rooms with high traffic.

Paint for non-woven wallpaper for painting can be:

Matte, it perfectly masks defects on walls and ceilings.
Semi-matt, which is mainly used in dark rooms (corridors, hallways).
Glossy, it is recommended to use it on perfectly flat walls, since the play of light and bright glare will highlight all the depressions and bumps on their surface.

For volumetric canvases, designers combine paint: they apply matte to the entire surface, and then the relief is painted with glossy, thus highlighting the pattern even more clearly. Or structural wallpaper is painted with a special roller, which applies paint only to the convex part of the pattern.

Experts advise purchasing white wallpaper for coloring, but if you initially chose colored ones, then in order to choose the right shade, it is better to contact the masters.

Important! When this is not possible, and you mixed the color with your own hands, then you should not paint the entire wall at once, what if you don't like it after drying? You need to try the resulting color in a small, inconspicuous area in order to finally decide on the chosen tone.

The construction market offers the following widely used and proven brands:

Tikkurila.

Country of origin - Finland, acrylate paint for wallpaper dries quickly, fits perfectly on any surface. Has a variety of fashionable, luxury shades. It is used in any premises.

Tex.

Country of origin - Russia. The base is super white, a wide range of shades has been developed for tinting, it is used for coloring any kind of wallpaper. Withstands daily wet cleaning.

Country of origin - Russia. The main color is white, a wide range of colorants. It is used in rooms with moderate humidity, dries quickly, is easy to apply, has a high environmental friendliness.

Country of origin - Denmark. Forms a thin coating that emphasizes the pattern of the canvas, is evenly distributed, resistant to abrasion and wet cleaning.

These brands are distinguished by good coverage, economy, evenness of application, depth and saturation of shades. In addition, they are time-tested, do not fade and retain their original color over a long period of use.

Gallery

We offer a selection of several interesting design solutions using paintable wallpaper.

We hope that we clearly talked about the types of wallpaper for painting, adhesives and paints used, presented photos and videos in this article. And if you decide to use non-woven wallpaper for painting in your home, then the interior of your home will always be new, bright and memorable.

Structurally, profile wallpaper is a finishing material with a paper base. It can be printed or embossed in different colors. Products can imitate wood, metal or fabric.

Some characteristics

products of the structural profile type are 2-ply paper with a weight of 120 g / m². It is made by printing a foam paste with preparation. Number of colors 1-6. During the production process, mandatory gelatinization is applied in a special channel at 16 degrees;
further in an oven with a temperature of 200-210 degrees, the PVC paste forms a foam, which makes it possible to give the material a relief;
the elements are then cooled and formed into rolls for sale.

A variety of structurally shaped structures:

structurally profile wallpapers of a simple type are elements of light colors with coarse fibers, which can have a fabric or plaster structure;
a high-end product is a product with a pattern from a variety of colors;
granular type are devices that are sprinkled with various types of granules after the final printing.

A distinctive feature of this type of material is good compatibility with any interior style and excellent decorative properties. Thanks to production technologies, such a finishing material is as convenient as possible for use.

In addition, such wallpapers can be repainted several times in a row, and they will not lose their properties. This is very important in terms of saving money. This finishing material has a very affordable cost. Gluing structurally shaped wallpaper is as easy as shelling pears.

Back to the table of contents

Structurally profile wallpaper: how to glue?

This type of wallpaper is produced on 2 bases: non-woven and paper. Therefore, with this in mind, it is worth choosing an adhesive for mounting the material.

For example, paper-based paintable wallpaper has a denser structure due to a special impregnation from a solution. Such systems let steam through.

The gluing process depends on the type of base.

The paper base implies the application of glue to the walls and the material itself (for non-woven or vinyl products), after which the canvas is applied to the treated surface and gently smoothed to the sides.

The main thing is to dock the canvas correctly. It is important that textured wallpaper should be glued carefully to avoid bubbles and folds that are difficult to remove. If the wallpaper has a non-woven base, then they have a strong structure.

It is necessary to glue such elements (structural wallpaper), having previously applied glue only to the working wall, on which then apply a dry cloth. You can achieve a perfect joint between the edges of the canvas - it's pretty simple.

In order for the wallpapering to proceed correctly and you get the desired effect from the new room, you should choose the right glue. The choice of glue is based on the basis of the wallpaper.

An important point of pasting is the surface treatment of the walls before installation:

be sure to carefully remove the old wallpaper, level the walls. They must be dry and clean. This is a guarantee that the strips will adhere properly and will not fall off the next day;
when the wallpaper is completely dry over the entire surface, it can be painted, and in a few words of paint. Layering of paint depends on the density of the canvas itself. The painting process must be carried out in stages to achieve an even coating. The paint is not spread on the canvas, but rolled out. Do not press too hard on the roller, otherwise stripes may appear on the wallpaper. Each subsequent layer must be applied after the previous layer has dried thoroughly.

There is some trickery when dyeing non-woven wallpaper. It is necessary to apply paint from the seamy side before gluing the canvas. Non-woven fabric will absorb paint, and vinyl spraying will not change its white color.

The washing ability of your wallpaper depends on the choice of paint. For example, it is available in acrylic or latex consistency.

For interior decoration of an apartment, wallpapers are most often used, they are different: paper, vinyl, acrylic, non-woven. Non-woven are of two types: the first - the wallpaper is completely made of non-woven, the second - a coating on a non-woven basis. It is believed that such paper was invented in Germany, which is where the name came from. Flizelin - non-woven fabric, which includes cellulose and fabric elements, it is made by pressing. Such wallpaper can include both natural and synthetic fibers.

Non-woven wallpaper appeared not so long ago, but quickly gained popularity due to its advantages:

high moisture resistance;
material strength and wear resistance;
ecological cleanliness;
I pass air well;
fire resistance;
ease of installation;
wash well.

It is possible to glue the non-woven coating on walls that have small irregularities left after repair work. Structural embossing on it can hide many defects, which will save time and effort on the repair process.

During installation, only the wall is smeared with glue, which greatly facilitates the gluing of wallpaper, and there is also no need to prepare a lot of free space in order to spread the covering elements and coat them with glue. Embossed wallpaper on a non-woven base has a large width, which speeds up repair work and reduces the number of joints. It is very convenient to stick them on, they do not stretch from the glue and do not form "bubbles". It will also be very easy to remove them, for this the coating does not need to be wetted. It is enough just to detach its edges from the wall and pull them towards you - the material will easily come off.

You can wash the non-woven coating not only with water, but also with detergents. This material also has some disadvantages that should be considered when choosing the option for finishing your interior:

the embossed surface accumulates dust, this is a reason for additional care;
a large drawing is more prone to mechanical damage, which must be taken into account if children or animals live in the apartment;
embossed and embossed materials are expensive;
the coating has some transparency and requires a solid wall without any stains, especially for light-colored wallpapers.

Types of non-woven wallpaper

Non-woven wallpaper is available in two types: with a smooth texture and embossed. When touched, they feel like velvet. Structural non-woven coatings can have a solid relief, a textile surface or a three-dimensional pattern. The coating gets its bulk due to a certain embossing technology, for example, hot or chemical with foamed PVC.

Paintable material

The most common type of non-woven wallpaper is paintable. These models have an embossed surface and are made in light colors: white, yellowish, light beige. Latex, acrylic or water-dispersion paint is used for them. However, the more layers of paint are applied to the material, the less air exchange will occur in it.

Only after staining with latex paint can the wallpaper be washed. The advantages of such wall coverings are that the joints of the canvases become invisible, and in order to update the interior, it is enough to simply repaint the wallpaper. This feature allows you to significantly save on repair work. There are several ways to paint non-woven textured wallpaper:

regular painting with a roller;
structural coatings are painted with a short-pile roller, so that only the pattern is painted, and the base remains intact;
materials with a vinyl layer can be painted before gluing to the wall, the paint will be absorbed into the non-woven base, and the pattern will remain unchanged;
painting the walls before gluing the wallpaper will give them a light pastel shade.

Non-woven coatings are painted only after they have completely dried, not earlier than a day after gluing.

Important! You can repaint non-woven wallpaper for painting up to 5 times.

Textile wallpaper

Textile wallpapers on a non-woven basis look very elegant and sophisticated in the interior. The base is non-woven, and the textile layer is made of silk, velor, flax or other materials. Such wallpapers look very impressive, but they are also quite expensive. Let's consider what advantages they have:

rich appearance;
the joints between the canvases are not visible;
environmental friendliness;
create additional sound and heat insulation.

The disadvantages of textile wallpaper include the following features: they require regular maintenance, actively accumulate dust, absorb odors.

Embossed wallpaper

The non-woven base for embossed coverings consists of cellulose fibers that are bonded with a polymer. The top layer is made of polyvinyl chloride. Such materials are also called non-woven vinyl. They are usually produced as an embossed paintable coating. They are able to withstand re-staining several times without losing the quality of the pattern. Embossed wallpaper has the following advantages:

fire safety;
the ability to mask small defects;
ease of cleaning;
you can detach the damaged vinyl layer, and stick new wallpaper on the lower one.

Hot Stamping Vinyl Wallpaper

Vinyl coverings have a decorative PVC top layer. The vinyl surface is acid and grease resistant and reduces the risk of fire. The production of hot-stamped vinyl wallpaper is rather laborious and consists of the following stages: foamed polyvinyl chloride is applied to the non-woven layer; I pass the coating through the chamber, where the PVC becomes soft and plastic; with special rollers they form a corresponding relief on the surface.

Hot stamping coatings are of three types: silk-screen printing, having a smooth and even surface; heavy vinyl is like a thick layer of plaster; flat vinyl characterized by imitation of various materials such as brickwork, stone cladding, wood, etc.

Consider the advantages of this type of materials:

long service life;
resistant to light, heat, water and cleaning agents;
do not absorb odors;
have thermal insulation properties;
are considered the most environmentally friendly of all types of vinyl wallpaper.

The disadvantages of this type of wallpaper include low air permeability and high cost.

Important! In a room covered with vinyl wallpaper, air stagnation should not be allowed, as this can lead to high humidity and the appearance of fungus on the walls. Regular ventilation is advisable.

Chemical Embossed Vinyl Wallpaper

To obtain vinyl coatings of chemical embossing, an inhibitor, suppressing foamed vinyl, is applied to certain areas of the PVC-coated canvas. Then the material is heated in the chamber and the layer that has not been processed foams and increases its volume. It turns out a very original combination of silk-screen printing and foamed vinyl.

Consider the advantages of foamed PVC coatings:

interesting design;
resistance to mechanical stress;
the possibility of regular washing;
long service life - up to 17 years.

The disadvantages of foamed vinyl include the fact that it cannot hide defects on the walls. Therefore, in the process of repair work, it is necessary to take into account that a perfectly smooth wall surface is required for such a coating.

Interior solutions

The undoubted advantage of structural wallpaper is the variety of patterns, shades and textures. In the process of choosing an option for your interior, your eyes simply run up and it is difficult to quickly decide. In this case, the recommendations of specialists will help. For example, for a room with artificial light, wallpaper in pastel shades with embossing is suitable. A large volumetric drawing will look good in a large room. Imitation for a variety of materials: brick, wood, tiles allows you to find a suitable solution for any style of room.

To create an original room design, it is better to combine materials of different styles, for example, combine plastering with wallpaper for painting.

Another interesting solution is to decorate the interior in the patchwork style, it is a combination of scraps of different embossed coatings.

Non-woven wallpaper with foamed PVC is often used to decorate hallways and industrial premises.

Silk-screen printing will look beautiful in rooms with good lighting, where its light effects will fully unfold.

When choosing a coating, many factors should be taken into account: who will live in the apartment, size, illumination, humidity, purpose of the room, style of furniture, what mechanical influences the material will be exposed to. Taking all factors into account, you will find the perfect solution that will delight you for many years and will not cause unnecessary trouble.

The most popular ways to decorate rooms are wallpapering and painting the walls. An alternative type of finish, which has its pros and cons, is paintable wallpaper.

What are the options?

Modern paintable wallpaper is a particularly durable multilayer moisture-resistant material. According to the texture pattern, it can repeat hand-made decorative plaster, have an artistic ornament or be almost smooth.

All types of wallpaper known today with the possibility of coloring come from linkrusta. This is an embossed material made from natural ingredients.

Recently, linkrusta has been gaining popularity again as a luxury paint finish.

Depending on the base material, there are roughly textured paper and solid fibrous non-woven wallpaper.

Sometimes vinyl wallpaper on a paper or non-woven base is distinguished into a separate group.

Another type is glass cloth, or fiberglass, produced by textile technology.

Wallpaper for painting is initially white or cream, which allows you to select the desired paint tone with a "full hit". And some types may not be painted at all if the desired color of the walls is already on the canvas.

Paper

Paper wallpaper consists of two, less often of three layers. The lower base layer is impregnated with a water-repellent compound that provides strength and resistance to moisture.

The relief of such coatings is given by sawdust placed between the layers. Their chaotic arrangement can create the most bizarre texture, which is especially important for lovers of variety.

Structured paper models can last up to five colors. But keep in mind that with a less pronounced texture, their surface will become almost even after the third color change.

Among the advantages of such wallpapers are budget, a huge selection of textures, environmental friendliness.

However, you need to glue them with special care. Since the glue is applied to the web itself, it can stretch and wrinkle.

In operation, paper wallpaper is also quite whimsical. They require restoration in case of mechanical damage, which reduces their service life.

Non-woven

Non-woven wallpaper is most in demand due to its strength and aesthetic characteristics. In fact, these are several layers of pressed cellulose, the top of which has a relief pattern.

The non-woven material is similar to the dense cushioning material used in the garment industry. Its elasticity provides ease of application and excellent masking performance.

Non-woven fabric production technology is such that when stretched, it will not wrinkle and tear. It is fire resistant and not subject to mechanical damage.

This material is indispensable when covering a substrate subject to deformation or shrinkage. It does not shrink, does not change shape when pasting, perfectly hides minor defects in the base surface.

The relief of the decorative layer of this wall covering is achieved by embossing. This allows manufacturers to create almost any design with varying depths - from subtle to expressive.

When choosing the texture of non-woven wallpaper, one should proceed from the taste preferences of the owners, the expected effect and functional necessity.

The softly expressed small pattern looks like a textile covering and creates an atmosphere of warmth and comfort. A large convex pattern will better hide the imperfections of the walls and serve to highlight certain areas.

Manufacturers guarantee the possibility of painting non-woven wallpaper up to seven times, however, the embossing depth must also be taken into account.

Non-woven coatings provide many options for paint application, in addition to the traditional solid:

spraying the pattern with aerosol paint;
giving the appearance of minting in gold with double staining;
with a convex vertical pattern - striped painting of patterns with a second layer;
stenciling on a smooth variety of wallpaper.

Among the undoubted advantages of this type of coating are environmental friendliness and hypoallergenicity. The porous structure of the material is breathable, which means it is loyal to temperature extremes and changes in humidity.

Non-woven wallpaper is not subject to mechanical damage, does not deform and does not get wet, it is fireproof.

Among the disadvantages of such a finish can be called a significant width, which requires some professional skills in pasting.

Vinyl

Pure vinyl paintable wallpaper does not exist. Foam vinyl is sprayed onto a non-woven or paper base already known to us, which forms a textured pattern.

Vinyl spraying is particularly fragile, easily scratched. Covering with a layer of paint is necessary, since it adds strength to them, although it does not completely remove the problem.

The peculiar texture of vinyl wallpaper makes it difficult to apply paint evenly. By painting the inside out with latex paint that will show through thinner areas, you can create a two-tone pattern.

When painting vinyl wallpaper, you can choose any type of paint except oil, otherwise only stains will remain on the smooth outer surface.

Fiberglass

It sounds unexpected, but such wallpapers are made using weaving technology, only from glass threads of different thicknesses. Subsequent impregnation with modified starch gives the glass a stable shape.

The type of pattern coming out from under the loom depends on the number of threads:

regular - from two threads. As a result, the pattern is quite simple - herringbone, rhombuses, matting, diagonal, etc .;
jacquard - an original design pattern, programmed by a computer. It is possible to make custom-made glass wallpaper with corporate symbols or a family coat of arms.

Fiberglass roll coatings are particularly strong and durable. They are often used for rooms with a high degree of wear and tear - offices, hotels, sanatoriums.

Glass fiber is very easy to clean, since it does not attract dust and can easily tolerate cleaning with a stiff brush. They are unattractive to insects as food or building material, which also eliminates unnecessary problems.

Also, this decorative coating is distinguished by high fire safety. They do not burn or emit toxic substances when heated, and even prevent the spread of fire.

The composition of glass-woven wallpaper excludes any harmful effect on living organisms. They are made exclusively from natural ingredients - soda, quartz sand, clay and limestone.

To level the base for pasting, latex primers are applied to the putty. You can use any paint on top, but for an ideal result it should be applied in two layers.

When deciding which wallpaper for painting is better, you need to consider the following factors:

For the surface covered with fiberglass, careful preparation is necessary. The wall may not be very even, but uniform in color, otherwise stains will appear through the transparent glass fabric.
When working with glass cloth wallpaper, you must use protective equipment for hands and eyes. If you come across a low-quality roll with crumbling threads, handling it can irritate the skin.
The usual textures of such coatings consist of only two threads and do not have a pronounced relief. After a few repaints, your glass walls can become completely smooth.
Dismantling such wallpaper will be very difficult. Most likely, they will have to be removed along with the putty.

Common pros and cons

Painted wallpaper has a number of undoubted advantages over other types of wall decoration:

In fairness, it is worth mentioning not only the pros, but also the cons of using wallpaper for painting:

It is quite difficult to make a uniform application of paint on some types of wallpaper yourself. Most likely, you will have to call the master.
The maximum number of stains declared by the manufacturer must be adjusted to the depth of the pattern.

Wallpaper for painting or just painting?

Honestly, in the photo it is sometimes impossible to distinguish the rooms with the use of paintable wallpaper and painted walls in the interior.

Indeed, these two finishes have a lot in common. You can choose a special shade that is not found in the finished version.

Interior stickers will look good on a smooth version of wallpaper, as well as on painted walls. It is also a good solution for those who are fond of artistic interior painting.

To decide which of the two types of finishing to choose, you can use the algorithm below.

With wallpaper, it is easier and faster to touch up and heal damage. In case of minor damage, it is enough to simply touch up the scratch, but if the defect is serious, replace the piece and paint over.

True, there are cases when the whole line of reasoning according to the proposed order does not make sense. It happens that the tasks set for the owners are solved by a single type of decoration.

For example, if we are talking about finishing a log wall, then the choice will be in favor of painting. If the repair is in a new building, then preference should be given to wallpaper for painting, which will hide the deformation of the walls during shrinkage.

Paintable wallpaper combines the functional advantages of painted walls with the availability of conventional roll coatings. It is the perfect combination of quality, functionality, budget and originality.