Children's chair from a tree with their own hand drawings. Woodchair from wood with their own hands: easy, simple and fast. Feature of children's furniture

When the baby appears in the house there are new items that need him. And of course, every parent wants to buy all the best for the child. And what could be better than manufactured independently. After reading our article, you can make a children's chair for feeding with your own hands. Drawings, sizes, schemes - all this will be agreed. And most importantly - it will be comfortable and safe for your baby, because you will be sure as the selected materials, and the reliability of the assembly of the whole design.

Hell for feeding with her own hands

Such a chair for feeding will need your choice when he will be six months old, and he will start to sit on his own. On the chair there is a formation of the musculoskeletal system of your baby, and its posture. It will be his first property, thanks to which he will meet the world around.

That's why the children's chairs for feeding should be not only convenient, but also useful.

General requirements

In order for this subject of furniture to be practical and comfortable, the following nuances should be taken into account:

Chair should not be soft. To the skeleton of the child develops correctly, the body should feel a reliable support. But on the feeding chair, we need relatively thin soft linings on the seat and the back.
Stool material. For a child, it is important to use non-toxic, natural, such as wood, plywood, chipboard.

Important! Do not use plastic, as it contains not always harmless substances.

Sizes of the chair. In order for your baby to feel comfortable, you need to correctly calculate the height of the back and the length, the width of the seat.

Important! There is a special table, which is compiled for children's furniture. On this table, we determine that the height of the chair seat must be 20 cm if your child's growth is from 80 to 90 cm, and the width, depth 33 and 26 cm, respectively.

Feeding chairs

The child begins to eat behind the overall table, starting with six months. Of course, it is necessary that the baby take food along with all family members. For convenience, various options have been developed, but putting the baby to the homemade stool, you must be confident of its safety.

Designs of children's chairs for feeding:

Chair at high legs - Made on long legs. Sitting into it, the baby will be on the same level with all sitting at the dinner table.
Soft case - it looks like Slim, which is attached to the usual chair. This option can be taken with you to give or visit.
Combined chair - a small chair with restrictive rings is installed at a low table.

Selection of material

For the manufacture of the chair, the wood of coniferous breeds of pine or ate. This species is quite durable and easy to process, wood texture is pleasant in appearance.

Joiner's tools:

nails, sandpaper;
loops, self-tapping screws (special connecting elements);
saw;
a hammer;
adhesive for wood;
dVP sheet, plywood;
fabric, batting or syntheps;
lacquer or paint for finishing coating, brushes.

Important! Collect the paint on an acrylic basis, and the varnishes are non-toxic on a water basis, because your baby can not only breathe them, but try tooth.

Combined highchair for feeding with their own hands

We offer a detailed description of the stages of work on the manufacture of parts and assembly of a combined chair for feeding. Here you need to make a chair and the table separately. This option assembled can be used, feeding the child behind the common table, and disassemble, you can get a child for various games and classes.

Workbathing details

The first stage is to prepare all the details for this chairs. You need to prepare such materials:

bar with a thickness of 200h400 mm - for legs and crossbars;
the board is a small thickness of 200-250 mm - to dry out armrests;
sheet Fiberboard 2x2.1 m for backrest and seat;
plywood at the worktop.

Preparation of parts for stool

For the manufacture of a chair you will need such details:

4 children legs - length of the workpiece 390 mm;
3 children. transverse bar - 300 mm long;
4 children rounded elements;
1 children. table top 200x340 mm (you can change your taste);
2 pcs. - upper crossbind size 220 mm;
2 pcs. - Lower crossbind size 340 mm.

Important! In order for your children's chair for feeding with their own hands, it is beautiful and smooth, the dimensions of the parts must accurately match the drawing.

Making parts for table

It will take:

4 legs with a length of 500 mm;
4 transverse rails Size 340 mm;
4 plates with a length of 410 mm;
plywood for tabletop sizes 380x450 mm.

Important! You can not buy all the necessary materials, you can pick up under the desired size using items unnecessary in your farm.

Now we have already reached the main stage - the assembly of the whole design. Be attentive and carefully at work, do everything perfectly, because you are trying for your child, it means that it should provide him, first of all, security and convenience.

Wood preparation:

In the production of the tree bar is cut into certain sizes. Slowing parts per dimensions, need to remove all irregularities, roughness, scratches.
Detail of the rounded element of the sidewall for the stool must be rounded with a joinery or jigsaw electric.

Important! Doing the roundings of the sidewalls need according to the drawing of a children's chair for feeding.

It is necessary to fasten with the help of a wanking (you can buy in the furniture accessories department). In extreme cases, the use of self-tapping screws is allowed.

Mounting process:

In places of attachment on a board or bar cut out or drill with a drill hole with a depth of 30-40 mm.

Important! Make holes carefully, not drilled through the details of the chair.

Connect and insert the seasons.

Build sidewall

Your chair will have two sidewalls that will fen your baby from falling. To do this, you will need for each sidewall by:

2 roundings;
2 legs;
2 top and bottom strips.

The sidewall is collecting separately each. To do this, it is necessary:

Connect legs and lower crossbar.
Secure the rounding to the upper crossbar.
Glue these two parts together.

Important! Before connecting two bars, the hole and the wanks should be lubricated with glue for furniture or pva.

The same collection process will occur for the second part of the sidewall. All items need to leave to push for a day. After - pass the sandpaper on this part of the chair to finally remove all irregularities.

Important! Carefully make sure that all the corners between the bars are straight, and the side parts are symmetrical.

Seat manufacture

We proceed to the process, it is necessary:

Cut from chipboard 6 rectangles 300x250 mm.
Round 2 corners along the long side.
Sand all edges with emery paper.
Glue 2 plates put under the press.
Fix the finished parts bent along the metal strip or fasten with screws.

Seat assembly

We proceed to the assembly of the chair, for this you need:

The sidewalls are combined with transverse boards using the sewage, as described above.
Secure the planks to support the back and plywood countertops, the same method.

Important! In order to be more convenient to fold the design, you need to outline the installation locations, drill holes and put the bars without glue. Carefully view, remove all flaws. Then you can use the glue for the final docking of the elements.

Production of table

The technological process itself is very similar to the assembly of the chair.

Collection technology table:

Attach the top and bottom planks to the legs.
Transverse bars with a length of 340 mm, copp the side parts of the table.
The sidewalls are grinding fine-grained emery paper.
Mounting countertops - you need to fasten with the end of the design.

Seat manufacture

This stage is optional, but for the comfort of your child, do not spare the material and the time spent. To do this, you will need:

foam rubber not more than 2 cm;
dense furniture fabric or colorful oilcloth;
building stapler.

We will proceed to the process, for which you need:

Cut foam rubber on the contour of the seat and backs.
Printed to chipboard using PVA.
Cut the patterns of the back and the seat, making a score to the bend 4-5 cm on the seat, and the back will need so much to cover the two sides.
On the seat to impose upholstered fabric.
Snap from four sides with brackets on the back.
To shoot the seat circumference, adjust the uniform tension of the tissue.

Important! The same techniques need to cover the seat of the seat with the difference that here you will be covered and wrapped in the case, wrapped the cloth diagonally with the envelope.

Mobile Highchair

Such a version of the chair you can take with you to give or visit. We offer you a portable (mobile) chairs for feeding, which you can sew at home, having elementary sewing skills.

Creative potential Man can realize on such utilitarian things as furniture. When the household is the procedure, when all urgent cases are redone, you can make the creation of furniture for seating. In particular, make a wooden highchair. In this option, it is no back, but can be made with a back. I will give a separate drawing.

The design is made and taking into account the adult burden, so, in fact, it is a universal chair. That is, a child and an adult can sit at him. So I sketched the drawing of this chair.

Wooden Wooden Chair drawing

Option with backrest (size in inches)

Video instruction

In this video is shown how to make a classic wooden highchair.

What will be required for work

Wooden bar 4x4 cm - for the heads of the chair, 4x2 cm - for the upper cross, 3x2 cm - for the lower cross

Sitting belts

Nails for fastening belts to chairs frame

Furniture screw confirmation - for fastening legs and cross

Furniture varnish

Tool: Drill, Cornel, Conductor for drilling at an angle, brush for applying varnish

Progress

1 - 2 - Measure and drink wooden blanks for the legs of the chair and the crossbar. We proceed with sandpaper Wooden surfaces.

3 - With the help of the conductor, drill at an angle of 45 degrees of the hole in crossbars and legs under the screws confirmates.

4 - connect screws frame chairs. Please note that in the legs of the chair, drill the holes of a smaller diameter, rather than in cross, otherwise the screws confirm themselves. The angle is also 45 degrees.

5 - 6 - The resulting stool frame is covered with furniture varnish. We give a chair time, so that he is. Then proceed to weaving the seating.

7 - Fresh cloves to the belt frame. First one row along, then a seal row across. See photo 7 to understand the principle of weaving. The main thing is to combine the ranks. That is, every next belt is beginning to be trained in the first, then in the second transverse belt.

As a result, we get such a wonderful highchair. By the way, the belts can be used any if you have a lot of old belts in your collection, from my husband, you can cut the plaques and put them in business. In the same way, you can go with handles from bags, briefcases and so on ...

An interesting version of a children's chair with a hare ears. Men, think how to implement the idea. In my opinion a very pretty option!

In fact, there is nothing complicated in the design. It will take two circles, and legs with ears, plus make a couple of cutouts.

Highchairs can be made in the kit if you have several guys, or twins.

But the chairs of the bunny is simpler. There are generally one base, legs and ears embedded in the grooves and glued there.

Chair with a backs of thick plywood for a child

Well, here is another option, hesitated by an electric bike of thick plywood. The scheme can be enlarged on the scale, transfer to the paneur, cut the blanks and assemble the design.

And here is another interesting idea of \u200b\u200ba dimensionless highchair for feeding a child behind an adult table. Of course, here you should think about how to realize the idea. It is noteworthy that as the child grows, you can shift the lower bar for the baby's feet.

Beautiful Children's Chair from Master Brothers

Make a children's table with your own hands is not so difficult, as it seems. It is only necessary to have the necessary materials, as well as some skills in working with wood and tools.

Table for children: detailed instructions

On video: Detailed master class on the manufacture of table.

The design of the children's table is pretty simple and this is perfectly visible in the photo. It includes a tabletop and legs that hold it. For the legs you need wooden bars with a size of 40x40 mm (50x50). As a tabletop, you can use a furniture shield by reducing it to the desired size using a saw.

If there is no ready-made tabletop, you can make it by knocking up wide boards, and with top of sticking a piece of plywood.

Following simple instructions, you can make a completely decent children's table with your own hands.

Take the furniture shield with a size of 40x80 cm. On the reverse side, make a markup to fasten the frame to which the legs will be screwed later. Return approximately 5 cm from the edge and read a smooth line across the perimeter of the table top.

Take the long block 40x40 mm, with a saw, cut it into two pieces of 30 cm long and two - 70 cm.

With the help of self-screws, fasten the bars strictly along the lines marked. So that the tree does not crack, mark the connection places in advance, the pva glue, and under the screws to put the washers.

Take another 4 bar (40x40) of the same length (40-50 cm) and screw them in the corners of the structure using self-samples. Ideally, you need to use special metal corners that will provide the table stability.

In principle, the table is ready, it remains only to give him an external aesthetics and protect against external influence (scratches, moisture). To do this, handle the sandpaper all the design, the ends of the table top will cross the special edge. Product cover three layers of varnish.

Table with lifting lid

A simple children's table from the tree is fully prepared for further use. On him the child will be able to play and learn. Especially for drawing and various types of artistic creativity can be made on their own table with a lid, similar to the fact that in the photo.

Take the finished table top of 90x45 cm. From individual bars (50x50 mm) to build a frame. Take two wooden segments with a length of 80 cm, two - 40 cm and run them with nails. In the middle, insert another exactly suitable in size (about 35 cm). To strengthen the design to each angle on the self-tapping screws, install wooden corners that can be ast on yourself. Attach the worktop to the front of the frame on 2-3 furniture hinge hinges.

Furniture loops can be replaced by ordinary door, which are sold at any store.

A table for creativity with a lifting lid must be supplemented with a lifting and adjusting mechanism. To do this, take two thin bars with a length of 20 to 40 cm and strengthen them in a vertical position on the lid from the opposite side using another loop. They should be more powerful, since it is precisely on these loops all the load during games and classes.

To fix the lid in various positions, it is adjacent to the bars of 2-4 furniture hooks, depending on the lifting step. One sufficiently long bolt lead to the base of the frame so that they partially performed. These are bolts and will hold the cover in the raised state.

Adjust the location of the bolts will have literally on the eye. It is necessary to lift the tabletop so that the adjusting bars freely hung, and then mark the desired points for drilling.

For the manufacture of the table, it is best to use finished legs from any material. Screw them to the frame from the bottom, using the screws.

All parts of the finished product are treated with sandpaper before smoothness. Cover the pair of lacquer layers.

Cardboard Table Option

If working with a tree does not like, then a small children's table can be made from ordinary cardboard. To do this, you will need a large box from under household appliances and cardboard tubes remaining from foil or food film.

Cut the box with a stationery knife. Seam on the surface 5 parts with rounded edges for a tabletop size 55x35 cm. Cut them.

On 4 parts in the corners, tick the circle, given the diameter of the tubes. Gently reduce holes.
Slit parts with each other using the glue type of moment. For the fortress, please press the press and leave the workpiece until complete drying.

Purchased furniture for the child's room, especially from natural materials, can be quite expensive. In the store or online is not always the option that will appeal. Children's chair and a table of wood can be created independently. Work will not submit difficulties if you prepare all the necessary parts and tools, use the smell and imagination. The award for work is a unique product, as comfortable as possible for the baby and practical in home.

Children's chair and a table of wood can be created independently.

A chair will cost much cheaper with his own hands, and the one's own sketch will respond to the intended parameters and the desired degree convenience for the kid.

The award for work is a unique product, as comfortable as possible for the baby and practical in home.

All parts made of natural wood can be purchased in the specialized departments of building stores. You will pick up boards and bars of the desired size.

The chair will cost much cheaper with your own hands.

Children's chair, created by his own, is good furniture for the child. In the process of work, you take into account the size of the seat and backs, the most comfortable for the growing baby, check the strength of the structure directly at home.

All parts made of natural wood can be purchased in the specialized departments of building stores.

Created by your own hands a wooden chair can be decorated to your taste, and not be content with the finished decision of the purchase of furniture.

You will pick up boards and bars of the desired size.

Necessary materials and tools

To create a chair, you will need various materials. Separate parts will be manufactured from them. First of all, it is wooden bars and junctions, from which the frame, seat and back is going to the frame. Instead of natural wood array, you can use chipboard or phanel, but these materials are short-lived. For fasteners, take screw screws in sufficient quantities. It will take the sandpaper of medium stiffness.

Children's chair, created by his own, is good furniture for the child.

Sizes of bars (length):

support legs - up to 20 cm;
connecting slats of the seat frame - up to 20 cm;
plates-jumper backrest - up to 20 cm.

Created wooden chair you can decorate to your taste.

In the process of manufacture for legs, the thick bars section 5x5 cm are used. For slats they take parts with a diameter of half smaller from the reference.

For slats, they take parts with a diameter of half smaller from the reference.

The seats board parameters (height and width) - also should not exceed 20 cm. The spinal part may be somewhat higher, but preferably not more than 30 cm.

they are less durable;
the environmental friendliness of such products has not yet been proven.

Seat board parameters (height and width) - also should not exceed 20 cm.

To make a chair with your own hands, you need suitable tools:

screwdriver;
screwdriver;
electrolovik;
wooden hacksaw.

The spinal part may be slightly higher, but preferably - no more than 30 cm.

The collected chair "will require" the original decor. In addition to the thread option, you can use paint or other materials to apply a pattern or application. For neat application, it will be necessary stencil.

The collected chair "will require" the original decor.

Determine with design and design

For a product from a tree you can come up with any option. Children's chair usually make with straight supports and the following shapes:

solid square or rectangular;
wide truncated cone;
direct pass-through (with a bar-jumper).

For neat application, it will be necessary stencil.

Creating a product with your own hands requires careful preparation. Previously need to make a sketch of the project. Picture a visual scheme of compounds of all parts individually with calculations of sections and length .. Following the sketches, you recreate the model in reality with the exact parameters. The chair, where all thoughtful sizes are observed, will "fit" the baby, will not create inconvenience.

For a product from a tree you can come up with any option.

Certain models are created with the calculation to ensure that the child is sitting at a common table along with other family members. In this case, the product is chosen by high legs, which are attached not exactly vertically in relation to the seat and the floor, and more widely. The lower part of such a chair will look like a truncated cone, connected to the resistance of wooden bars around the perimeter. The upper part will be approximately 30-35 cm below the table level.

Children's chair usually make with straight supports and the following forms of spinal design

If there are certain skills, then you can collect a folding product. Such objects are easily cleaned if necessary in the storage location.

For the selected designer solution, the parts are treated according to it.

Production Process: Step-by-step instruction

After preparing the drawing with precise parameters, we start collecting a simple children's chair.

Calculate exactly the length of the legs with the length of the legs, disconnect the extra hacksaw.
Drink the lintel-bars to fasten the frame in the seat area.
Connect them with a support structure. To enhance add furnace glue.
Attach the pre-fitted back and seat with self-screws.
All parts of the tree must be cleared with sandpaper so that there are no roughness and sowing.

The chair, where all thoughtful sizes are observed, will "fit" the baby, will not create inconvenience.

If the details are disproportionate, "subgore" them according to the calculated scheme with the help of hacksaw. So that the chair, created by their own hands, was convenient, ask the baby to sit on it, ask how comfortable it is.

If all sizes were defined correctly, the child will like new furniture. To the details were smooth, once again walk the sandpaper over the surface.

Certain models are created with the calculation to ensure that the child is sitting at a common table along with other family members.

For varnishing products, use only safe compositions - a special coating for children's furniture, an environmentally friendly and having the appropriate certificate.

The upper part will be approximately 30-35 cm below the table level.

After the external trim, give the chair well to dry, day or two. Then you can proceed to decorative finish, if such intended. If it is to apply the thread, then the lacquer is made after the completion of artistic processing and sanding parts.

Chaula decoration

For thread, use the jigsaw. You can make a decoration in the form of a flower, cutting it into the center of the back, or any geometric shape. Previously at the place of the future decor, make a pencil markup so that the thread turns out to be smooth. Carved may be parts such as legs and backs. Seat corners can be rounded with a jigsaw and skins.

In the process of manufacture for legs, the thick bars section 5x5 cm are used.

The top can also be made not strictly rectangular, but a truncated cone, rounded, composite. In the last version, you will need additional bars and transverse strips - one or two. Secure them at the expense of special holes in the connecting places with a spinal frame. This is a rather laborious process, but if you wish, you can choose this option.

For fasteners, take screw screws in sufficient quantities.

All parts processing actions must be performed before the highchair is assembled, the process of work will be faster, more convenient and more careful.

If there are certain skills, then you can collect a folding product.

To make your own hands, the subject of children's furniture looked more interesting, you can apply on the back and seat pattern. To do this, you need to use safe paints. The color scheme should be bright, cheerful. On wood furniture, simple ornaments, plant patterns, imitation of children's toys, such as machines are perfectly looking at the furniture.

Instead of natural wood array, you can use chipboard or phanel, but these materials are short-lived.

Due to the fact that the size of the product is small, a large drawing will become a kind of emphasis that attracts the attention of the child - he will like to sit on such a beautiful chair, playing the game or breakfast.

In decorating, you can use appliques - adhesive bright films on sale plentifully.

The image will be smooth if you use pre-cut from paper or tight plastic stencil.

In decorating, you can use appliques - adhesive bright films on sale plentifully. There will be an image in monophonic or multicolor - depends on your imagination.

First of all, it is wooden bars and junctions, from which the frame, seat and back is going to the frame.

In the decoration of the seat or the dorsal part of the children's chair, it is not recommended to use volumetric (protruding) parts, both small and large ones. First, it is uncomfortable for a child, secondly - they quickly fall off when using the product.

To create a chair, you will need various materials.

Video: Children's chair do it yourself

The baby grows not by day, but by the clock, and all the time it really wants to be like adults. The table and chair are one of those things that are not only "like adults", but also also differ in great functionality. Most of these goods in stores or are sold at a very high price, or made of poor-quality plastic with a specific smell and short-lived chipboard. But there is a good way out for parents - these furniture items are easy to do.

Necessary materials and tools

Materials for self-making of a children's table and a highchair are not so small, they are available, they can be bought in any construction supermarket. As the main material, not only natural wood, but also to the phaneer or chipboard can be used. But, of course, much more durable and durable material is a tree. It is environmentally safe and does not distinguish poisonous evaporation, does not cause various allergic reactions.

The list of necessary materials for the table includes a convenient assortment.

Countertop. Its sizes you can work out yourself. Workstore, like some other details, best to make to order. A classic square or rectangular shape is welcome. A round children's table is not common practice.
Four tree legs.They are also recommended to buy to order. Now such goods can be ordered in carpentry workshops and even in some building stores.
Boards for the power case. They must be purchased in the amount of 4 pieces.
Screws, nails or spikes With glue at your discretion.

You also need to purchase a hand-assembly stool material.

Boards for the back and seat.
Bars for pens. They are acquired at will, depending on whether you plan to make armrest handles or not.
Four legs. They should be small, but carefully treated sanduth.
Screws or nails of suitable sizes.

In addition to these things, the tools will be needed, which will be needed both for chairs and for the table:

electric drill;
carpentry glue;
sandpaper;
roulette;
line;
pencil;
a hammer.

Design schemes

When purchasing materials from wood, it is necessary to check their quality. Bruks and boards should be without jar, cracks or small protruding burrs. Wood should not be raw, rotten or amazed pests. Table. The design of the table is not complicated, so the lack of drawings are allowed, the main thing is to gently connect and "fit" parts of the future product to each other. Initially, it is necessary to count on the fact that the height of the table will be no more than 50 cm. Such an height will be the most optimal for the child. It is important to take into account the fact that the size of the table and the stool should be commensurate.

The design of the table can be different, but we will focus on a classic square version with 4 legs.The feature of the design of the table is its legs. They should be rather thick and stable. The cross section of each leg should be within 5x5 cm. Chair. As a rule, the design of all chairs with the back (just the same we consider in this article) is identical, the differences can only be in the form and size of the back. You can also experiment with the shape of the seat. It can be classic square, polygonal, round, with thread or upholstery.

Not so popular with independent manufacture, but quite real on the execution of tables and chairs, assembled without the use of screws, nails or other fixing materials. Details are fastened with the help of special fastening techniques of wooden bars in pieces of dusts. Such work requires experience and skills, therefore it is not quite suitable for non-profesionals. With respect to the construction of the structure there are a large number of options - various screws, nails, glue types and even spikes.

Upon completion of the process of designing the table and the stool, it is necessary, as at first, check them for the presence of protruding pieces of wood, cracks. It is necessary to minimize all sharp corners and uneven surfaces. But about it more below.

How to make your own hands?

Consider in more detail the process of manufacturing furniture.

Chair

Preparation of legs. Since the children's chair is furnished with small dimensions, then, accordingly, its details must be small. In particular, the length of the legs should not be more than 30 cm for a 70-centimeter chairs. All legs need to be cut and correct the sandpaper to one length. Of course, boards for slats must also be ground.
Prepare planks for legs and jumpers for seats. This is done for the subsequent stable and strong stool design.
Connect the entire design. At this stage, you need to carefully check all the pieces of details.
Glue design.To do this, it is best to use furnace glue, but it is quite suitable and superchalter from the shopping store.
Fixing the seat and legs.You can make it with screw screws or a simple hammer and nails. Recently, the relative popularity has won spikes. On the spikes "attract" the part and fastens all this with glue. It turns out quite reliable fastening.
Processing emery paper.This process is necessary in order to remove all potentially dangerous for a child's jar on the tree and give the stool a nice look.

Table

First of all, you need to measure the length of all legs with a roulette. If the difference is discovered in their length, then you need to correct them. Children's rude table can bring a lot of inconvenience, especially during the feeding of the child. This is done with the help of a hacksaw.
Drill the grooves in each of the legs.You need to make a groove on the end of the part, and then make it a rectangular shape.
Measure the depth of grooves.Next, it is necessary on each of the bars to measure the distance equal to the depth of the grooves.
Correction.To do this, you need to enroll each of the wooden bars from all sides, and remove the knife or sandpaper.
Connection of parts.At this stage it is important to check the accuracy of the angles, they must all be straight.
Bonding design.The final stage, in which all parts, if they are tightly connected to each other, glue with joinery glue. For greater durability, it is possible to use the hammer and nails.

Decorating furniture

The main thing about decorating children's furniture is the safety of coatings. Paints and varnish need to be purchased from a reliable manufacturer and try in advance on a piece of wood. Regarding recently domestic and western manufacturers, special varnish for children's furniture was released on sale. According to manufacturers, it is safe when applied and does not allocate harmful evaporation after drying. The most common version of the chair after painting is screen drawings. They can be completely applied to a conventional small tassel from the art goods store. The same applies to the most different stickers on the furniture.

Colors of paints must be bright, but not poisonous. Basic colors are welcome - blue, red and yellow. As a drawings, you can choose various folk ornaments, simplified animal patterns, symbolic designations of type of stars, a heart (for a girl), machines (for a boy) and even letters and inscriptions. The kid can delight and inspire the opportunity to independently decorate its future furniture. A good option in this case are the prints of his palms. Special craftsmen with golden hands, you can experiment with carvings. She can decorate the head of the chairs. To do this, you first need to apply a pencil pattern, and then start directly the work itself by the jigsaw. If you initially plan to make a thread, then it is best to make it before you collect a chairs.

Children's things are very often subjected to various mechanical and other effects, so it will be better to protect the surface and apply several layers of varnish. In extreme cases, and in the acute need to protect the surface of the table, an epoxy resin can be used, which, frozen, forms a thick film similar to a glass surface. But it is worth it only if the table is used for drawing or will often be a wet cleaning with chemicals.