Composition of titanium adhesive for ceiling tiles. Titanium glue: what glues? TITAN is an irreplaceable assistant in repair and in everyday life

Glue "Titan" is an excellent assistant when carrying out various construction works. It can hardly be compared with any such remedy. It firmly fixes various finishing materials. How much glue is required for various surfaces, what characteristics are inherent in it, we will analyze in detail.

To understand the advantages of this tool, let's dwell on its characteristics:

Russian-made glue is particularly resistant to various loads and high humidity;
when the mass hardens, it acquires the consistency of foam;
use glue "Titan" can be used for both external and internal work;
consumption is economical;
the composition does not include solvents hazardous to humans;
when climatic conditions change, the elasticity remains the same;
there is no smell.

You can buy Titan in any of the following forms:

universal, used for gluing wood, linoleum, expanded polystyrene;
glue-mastic, which is used for concrete, cement, brick, wood, drywall, foam;
liquid nails intended for metal, ceramic, wooden structures, polyurethane.

How to apply?

Choosing the universal glue "Titan", you can apply it on various surfaces, which will significantly save your budget. He will be able to replace various tools that are required during construction.

The instruction states that before applying the product, the surface should be degreased. The adhesive layer should be thin, but if the surface is porous, then two layers are required. If ceiling tiles are being installed, glue is applied, making gaps. The product dries for 5 minutes, and then the glued surfaces are connected.

The glue will dry for no longer than an hour. As for the glue seam, it will take him a day for this.

Glue-mastic is applied with a spatula pointwise. When it is applied, the surfaces to be glued will need to be attached to each other and fixed for 3 seconds. The glue will set within 20 seconds and dry after 12 hours.

Watch the video to learn how to apply:

Liquid nails can be used on surfaces with pronounced imperfections, which can be removed with a thick adhesive layer.

Important! Before gluing something to a whitewashed wall or ceiling, you need to clean off the whitewash and also prime the surface. The composition of the primer includes denatured alcohol and glue.

Where is it applied?

It is possible to use "Titan" glue when performing various construction works:

After the Titan glue is completely dry, it can be masked by applying various finishing materials.

How to remove and dilute the product?

Cases are not excluded when it is required to remove glue from various surfaces. To remove it from clothing you will need:

cardboard;
hammer;
gauze;
nailfile;
laundry soap.

Put clothes on cardboard and cover the glue stain with gauze. Then you should tap it with a hammer. The remaining pieces of glue are cleaned off with a file. After that, you can start washing with laundry soap in hot water.

From the video you can find out in more detail:

To remove the dried composition from another surface, you will have to use a solvent. The dissolved stain will be removed quickly. The remains are scraped off with a spatula.

To dilute the adhesive, use alcohol, denatured alcohol or a disinfectant containing alcohol. The nail polish remover will do a great job if it contains isopropanol and butyl acetate.

Important! Those who dissolved "Titan" with acetone were faced with the fact that the glue began to curl up, so this liquid should be used with caution. They can only dilute the adhesive composition in a certain proportion: 4 parts of the glue will need 1 part of acetone.

Having considered the main technical characteristics of the Titan glue, we can conclude that it can not only glue surfaces, but is also perfect as a hermetic agent, due to its high moisture resistance. The most important thing in work is to strictly adhere to the instructions and follow all the rules. Only in this case the glued surfaces will last a long time.

When repairing, you have to solve a number of important tasks for bonding different types of surfaces. Many people prefer to buy several types of specialized adhesive mixtures at once to achieve diverse goals. However, there are preparations that can cope with any combined surface and achieve the most effective gluing result.

These include Titan glue. It has proven itself well in the construction services market, therefore it is very popular when carrying out various repair work in the house.

Specifications

Polymer adhesive Titanium is designed for a wide range of applications. As a versatile bonding agent, it allows you to solve many tasks, such as installing tiles or installing parquet floors. It can replace a lot of specialized adhesives due to its versatile formulation. In addition, it possesses a number of quality characteristics that make it possible to use it in various conditions. Glue Titan is resistant to sudden changes in temperature and is not afraid of high humidity, which makes it possible to use it in such functional areas as a bathroom or kitchen.

This type of adhesive adheres well to concrete, plaster, plaster and cement. Suitable for bonding various types of surfaces such as wood, parquet, linoleum, ceramics, plastic, glass and many others. This type is ideal for ceiling mounting. Titanium has a small consumption per 1 sq. meter, elastic and dries quickly. It has a transparent color, therefore it does not leave marks on the surface. This adhesive is often used as a sealant. The packaging always contains instructions for use, which will help to properly glue the necessary bases.

Areas of use

Due to its versatile properties, the adhesive is used for fixing a wide variety of surfaces.

For ceiling

The most widespread application of Titanium was obtained in the installation of ceiling coverings. It is ideal for fixing polystyrene tiles. Thanks to its transparent texture, it is suitable for even the most expensive types of coatings.

For floor

This adhesive has proven itself to be excellent in the installation of various types of floor coverings. It is suitable for laminate, linoleum, carpet and cork. It is resistant to stress, so it does not flake off over time. In addition, it adheres perfectly to parquet, despite the fact that there is an opinion about its difficult installation and the need for a specialized adhesive.

For walls.
Titanium glue is also suitable for installing various wall panels such as MDF or PVC.

Mode of application

It is quite easy to glue various materials on Titan. He is not whimsical in his work, so he allows you to perform any actions without any discomfort. The surface must be cleaned and dried before use. After that, it is necessary to apply glue to the base with a thin layer. Next, it is recommended to let it dry for 3 minutes, after which you can glue the parts. If the surface is porous, then you need to apply the glue in two layers. When installing tiles on the ceiling, the adhesive is applied with a dotted line.

If the surface is whitewashed, then it must be removed. Then it is recommended to prime the surface with glue, which can be mixed with denatured alcohol. Allow the mixture to dry for 4 hours, then proceed to tiling the ceiling. Glue Titan dries on average for half an hour.

When gluing with Titan glue, first of all, it is worth cleaning it. In some cases, it is necessary to apply a primer mixture to the base. The glue is applied evenly in a thin layer over the entire surface. Its versatile properties allow the material to be attached to any base, so it can be used to make a complete renovation throughout the apartment, from the ceiling to the floor. Detailed instructions for working with Titan glue can be viewed in the video.

The largest company Selena has been producing high-quality building mixtures, including glue, since 1992. One of the manufacturer's trademarks, Titan, offers a range of sealants and adhesives for a variety of applications. The brand hides many products for different purposes. Clay Titan is a combination of excellent technical characteristics and reliability.

Features of Titan glue depend on its purpose and type. There are several products in the product line that differ in technical characteristics. For example, glue-foam is not afraid of ultraviolet radiation, and Titan universal glue can be used at high humidity.

Titanium adhesives can be useful inside and outside at sufficiently low and high temperatures. The ready-made mixtures are moderately resistant to the rays of the sun, after hardening they do not change color, remain the same elastic and do not emit toxic substances. Such glue is not dangerous for humans and the environment.

Other features of Titanium adhesives:

Versatility, the possibility of their use outside and inside.
After complete curing, the adhesive does not lose its elasticity, it becomes resistant to different weather conditions, humidity, temperature extremes.
The series of adhesives from Titan can be used in high humidity indoors.
There is no need to prepare the adhesive before use.
In the composition of the funds there are no substances toxic to humans.

Reference! Tytan is suitable for many types of surfaces including wallpaper, linoleum, tiles, ceramics, wood, PVC, foam and many more.

Types of glue

Assembly adhesive Titan represents 5 main types of substances:

Universal.
Glue-mastic.
Liquid Nails.
Wallpaper.
Foam.

Each composition has unique characteristics, has its own areas of application.

Other types of titanium glue:

Wild is a moisture resistant compound that can withstand different temperatures, quickly solidifies, providing a reliable strong connection, it can be used as a primer if mixed with denatured alcohol.

SM - it is used when working with PVC, it is also widespread in the installation of ceramics, mosaics, parquet, linoleum.

Classic Fix is a universal compound that can be used at temperatures from -35 to +65. It does not dry quickly, it takes at least 48 hours to harden. Ready glue Fix Titanium transparent. It is also permissible to use it with foam rubber and PVC.

Styro 753 is a compound specially designed for PVC products. The glue is distinguished by the minimum consumption. Suitable for hot plates. It adheres well to other building materials, for example, concrete, brick, metal. It also prevents the formation of mold and mildew due to its antiseptic properties.

Professional 901 - Titanium heat-resistant compound, which is used more often for floor coverings. Suitable for a wide variety of indoor materials. Does not absorb moisture. This is the most popular composition from the manufacturer, which is widely used for metal panels, plastic, chipboard, skirting boards. Withstands temperature extremes and is resistant to moisture.

Professional for metal- liquid nails for mirrors. Differs in fast solidification.

Professional Express- for working with ceramics, stone and wood slabs.

Professional Hydro Fix- acrylic adhesive with excellent water dispersion characteristics. The composition is colorless, tolerates low and high temperatures.

Professional Multi Fix- has universal characteristics, great for mirrors and glass.

Related article: Polyurethane adhesive - manufacturers, properties and characteristics, methods of application

All adhesives from Titan are distinguished by the main component in the composition:

Rubber. This includes liquid nails. You can work with such mixtures with metal, glass, mirrors, ceiling tiles.
Acrylic. Such adhesive mixtures are often used by decorators. Craftsmen attach various parts with acrylic glue - beads, clay, connecting them with cardboard, ceramics.
Polyurethane. Such compositions are used for mineral wool and bitumen. The main areas of use are thermal insulation and roofing works.
Polymeric. This glue is characterized by high-quality sealing. Compositions are used for mineral wool, fiberglass, amalgam.

Reference! Titanium adhesives are produced in different forms - buckets, tubes, large tubes with a built-in dispenser.

Universal

Universal Titan has become the face of the brand. It is used in different conditions, indoors and outdoors. Can be used for materials such as glaze, PVC, leatherette, gypsum, wood, expanded polystyrene. The glue is colorless. It is sold ready-to-use.

The universal adhesive is distinguished by resistance to temperatures and moisture. After application, the adhesive forms a strong bond that is invisible after drying.

The glue is squeezed out in a small strip through a convenient dispenser. Before applying, you need to properly prepare the surface, otherwise the properties of the substance will be deteriorated. It dries out within half an hour, but complete hardening occurs in a day.

Reference! Taken together, all the properties of the composition make it indispensable for the installation of the ceiling for fixing the tiles.

Mastic

Adhesive-mastic Titanium is used more often for baseboards, ceiling tiles, structures made of expanded polystyrene, polyurethane and polystyrene foam. Representative - Titan Wild. It adheres well to plaster, concrete, plaster, wood, plywood and other materials.

Titan mastic is used as a leveling agent and crack filler. They can remove small defects on the surface before carrying out installation work.

Some features of Titan mastic:

UV resistance.
Non-susceptibility to destruction under the influence of low temperatures.
Lack of solvents.

Reference! Before using the glue-mastic, it is imperative to stir it.

The product is applied in a small layer on a previously prepared base. It is best to use a spatula for application. The air temperature when working with glue should be at least 7 degrees. The grasp of the composition takes place in 10 seconds, at which time the position can be corrected. For the mixture to harden completely, at least 12 hours must pass.

Liquid Nails

Titanium liquid nails are represented by a white paste, which serves as a substitute for screws and nails. They are available in small tubes of 200 and 310 mg. For larger staff, there is a special assembly gun for more convenient work.

The use of liquid nails is permissible with PVC, metal, tiles, cement, artificial stone, gypsum, wood, expanded polystyrene, polyurethane.

Reference! Liquid nails should not be used on wet surfaces or with polyethylene and polypropylene.

The product is applied in a fairly thick layer, spreading over the entire surface. Excess material is removed within 15 minutes with a sponge, during which time the primary solidification occurs. Liquid nails perform well even under severe frost conditions.

Wallpaper glue

Powder glue from Titan is produced specifically for wallpapering. The composition has antiseptic properties, which is the prevention of fungus and mold. What's good is the ability to correct the position of the wallpaper already on the wall.

Reference! Wallpaper glue is presented in three compositions - Vinyl, Universal and Non-woven.

The adhesive is applied as follows:

The powder is mixed with water until smooth.
The finished mixture is applied to the canvas from the center to the edges.
The composition sets a little within 5 minutes.
The canvas is glued to the wall.
The finished glue can be stored for a month.

Related article: Fabric glue: varieties, application features and instructions for making homemade glue

Foam glue

Polyurethane adhesive foam Titan Styro has a low level of secondary expansion and is used to insulate plates made of foam glass, basalt wool, polyurethane, and foam. The product can be used for insulation outside and inside the premises.

Foam glue is characterized by increased sealing properties and excellent adhesion quality. The tool adheres well to most surfaces, acts as an adhesive and insulation. Freezing takes place quickly, after a few hours you can continue working. The polyurethane compound has improved heat and sound insulation properties.

When filling the gaps with the agent, complete isolation occurs. The adhesive foam can be used in all weather conditions, in winter and summer, with high and low humidity.

These formulations have found many areas of application. They are often used for thermal insulation together with plates, as well as for sealing joints.

Reference! Foam is applied with a special gun or with already mounted dispensers.

PVA

PVA glue from Titan is divided into several types. The first one is for construction and is used for paper, cardboard, fabric. It can also be added to dry mortars to improve adhesion. There is also a super strong glue that is being prepared for carpentry work. It gives a very strong seam.

Before applying Titanium PVA glue, you need to clean the surface from dirt, watch that no lint and dust get into the mixture. Grasping of the composition takes place in a minute. After applying the glue, it must be smoothed with a roller to remove air bubbles.

Reference! In the construction industry, PVA glue is best suited for improving the quality of concrete, putty and plaster mixtures. It improves not only adhesion, but also water repellency.

Titanium glue based on PVA dispersion is recommended for cold and hot gluing of wood. It is suitable for wood exposed to moisture. The resulting seam can withstand temperatures up to 100 degrees. Full hardening time - up to 72 hours, depending on the material and layer thickness.

Instructions for use

General rules for working with Titanium glue:

To obtain a good adhesion, the surface must be cleaned, dried and degreased before gluing the material. You also need to remove all the irregularities.
The glue layer should be thin (except for liquid nails).
After applying the glue, you need to wait a few minutes, then stick to the base.
For the glue to harden, you need to wait no more than an hour, but you can load the surface and continue working only after a day.
In the event that the base is porous, the glue should be applied in two layers, allowing each layer to dry slightly.
Do not apply adhesive to whitewash. Before work, the surface must be washed and dried.
When the glue starts to thicken, it becomes difficult to work with it. In addition, the product loses its properties. In this case, it can be diluted with alcohol. But it is better not to allow drying at all, applying in small portions.

The rules for using Titan products will depend on the type of glue. The mastic should be applied pointwise, evenly spreading over the entire surface. When it is pressed against the base, the agent moves and in this way it is crushed into a continuous film.

The mastic dries up within 12 hours, but liquid nails harden within an hour. The latter should be applied dotted. Grasping occurs within 15 seconds. Liquid nails, according to the artisans, are best used for stone.

Related article: Aerosol adhesive - brands and tips for use

Powdered Titanium should be diluted with water, in accordance with the instructions on the package. Mixing should be carried out for at least 5 minutes. The mixture is applied in a thin layer only on the wallpaper. According to the instructions for Titan glue, the wall surface is not smeared. Transparent glue does not shine through and does not stain the base.

Titanium foam adhesive bonds surfaces by penetrating into fine crevices and pores. After an hour, you can observe the maximum filling of the material. The dose of the squeezed out agent should be correctly calculated, taking into account the degree of its expansion. If you give more foam, brittle seams may not withstand the pressure and suffer. In the example of a door frame, it can simply bend outward. And with a lack of composition, reliable fastening will not work.

Reference! When working with Titan glue, you need to take into account that even a transparent composition will be visible in the light. Therefore, after work, immediately remove excess material.

How to remove adhesive residues:

From solid non-porous materials, removal is carried out after drying, by breaking off. Then sanding and finishing with a sponge can be done.
It is necessary to remove the glue from porous soft surfaces until it hardens. To do this, use a damp, clean cloth.
From the front surface of the material, the composition is removed with a solvent.

In the video: Rules for the use of titanium glue.

How to dilute

During use, Titanium glue can thicken, which will adversely affect its properties. This problem can be solved by diluting the composition, returning it to its previous characteristics.

You can dilute the glue with the following means:

Medical ethyl alcohol.
Industrial alcohol.
Alcoholic salicylic acid solution.

Reference! Avoid using acetone, isopropyl alcohol or nail polish removers as solvents, as these can cause the adhesive to coagulate.

Price

The cost of titanium glue will depend on the type of packaging and the type of material. The universal composition can be purchased in the amount of 1 liter for 130 rubles. Titanium C will cost from 50 rubles for 25 milliliters. Means with a dispenser are more expensive. The cheapest way to buy glue is in buckets.

Reference! In large hardware stores, the price of Titanium glue is lower than in remote retail outlets. Competition also influences. Fighting for the consumer, manufacturers try to keep the cost of funds at the same level.

Average prices for different Titan products:

Titanium glue-mastic - 35 rubles for 250 ml.
Universal glue - 38 rubles for 250 ml.
Titanium C - 50 rubles for 250 ml.

Products from Titan are diverse, you can choose glue for almost any type of interior and exterior work. It is important to look at the quality of the product when buying, its storage conditions and shelf life. It is better not to buy glue in excess, as it will deteriorate over time. Before buying, you can consult with a professional who will indicate the best adhesive for a particular type of job. You need to be wary of very cheap funds.

Varieties of titanium glue (20 photos)

For mounting wood, foam, leatherette, PVC and many other finishing materials, Titan glue is applied to a concrete, cement or gypsum base. It has excellent technical characteristics and provides a strong, reliable surface connection.

Instructions for use

Glue use options differ in variety, therefore, they can significantly save money. One package of such material is able to replace many other funds required for repair and construction.

apply Titan glue only on a previously degreased flat surface, while the layer should not be too thick, otherwise the gluing will be of poor quality;
after application, allow the composition to dry for two to five minutes, then connect the surfaces to be bonded;
the glue is completely dry in 60 minutes, the maximum joint strength is achieved in 24 hours;
apply the composition in two layers on a porous surface;
installation of ceiling tiles involves the application of glue in small intervals;
it is categorically impossible to apply glue to the whitewash, it must first be removed and the surface must be carefully treated with a primer - a mixture of glue and denatured alcohol.

In some cases, when the repair has already been completed, you can see minor defects in the form of a detached corner of tiles, linoleum or wallpaper. All these flaws will be eliminated by glue. Tytan as it is highly efficient.

Specifications

"Titan" glue does not lose its quality characteristics, even if it is used at different ambient temperatures. The composition is characterized by resistance to direct sunlight, excellent elasticity. After curing, it does not become brittle and is not prone to delamination. Environmentally friendly, does not contain substances harmful to the human body.

Adhesive properties:

used for work indoors and outdoors;
suitable for bonding almost any material;
economically consumed;
perfectly glues polystyrene foam;
the seam is waterproof and elastic;
colorless, transparent;
sold completely ready-to-use;
does not contain substances harmful to the human body;
the elasticity of the composition does not change under the influence of various climatic conditions.

Forms of issue

Glue "Titan" is produced in several types, each of which has a different purpose.

Universal... Possesses moisture and heat resistance, forms a transparent adhesive seam, which becomes invisible after drying. It is used for gluing parquet, expanded polystyrene, PVC, wood.

It is squeezed out of a hermetically sealed package in a thin layer through a special dispenser. It is applied to a previously cleaned, dry surface. Dries in 40 minutes, maximum adhesion is achieved after 24 hours.

All of the above properties make the Titan universal adhesive an indispensable tool for installing ceiling tiles. Apply the compound to the tile with a thin dashed line, let it dry for a few minutes and press it against the ceiling.

Designed for gluing polyurethane and expanded polystyrene. Can be used to level surfaces and.

It adheres perfectly to concrete, brick, wood, fiberboard and chipboard substrates, as well as to plastered and cement-lime surfaces. The listed materials are glued together in any variation.

Advice! Stir the mastic before use.

Apply to the surface pointwise with a spatula and attach to the base. Within three seconds, the position can be corrected. The glue-mastic sets in 20 seconds, dries completely in 12 hours.

The adhesive is a white paste with a high setting speed and excellent elasticity. Effectively bonds steel, ceramics, polyurethane, mirrors, wood and PVC, it is permissible to use indoors and outdoors at ambient temperatures from -30 to + 60 ° C. Sold in cylinders that have mounts for a mounting gun.

Liquid nails are applied in a thick layer over the entire surface. This feature allows you to glue finishing materials on ceilings that have significant defects.

For wallpaper... The glue is available in the form of a powder, which must be dissolved in water before use. The mixture contains antiseptics that prevent the appearance and development of fungus and mold. Any wallpaper can be mounted using Titan glue.

It is characterized by high adhesion to mineral substrates, productivity and economy. It is used for laying foam and gas silicate blocks, foam and gas silicate, ceramic and silicate bricks.

Maximum adhesion occurs after 120 minutes; if glue obtained from dry mix is used - after 24-36 hours. You can work with the composition at an ambient temperature of at least -10 ° C.

On the packaging of each of the types, there must be instructions for the use of the adhesive mixture.

What glues and what can be diluted

The technical characteristics of the glue lead to a wide range of applications. Composition "Titan Wild" glues parquet, glass, ceramics, paper, wood, linoleum, as well as natural and artificial leather. Ideal for attaching Styrofoam and Styrofoam. The universal composition allows you to stick together dissimilar materials.

If the glue becomes too thick, it can be thinned with rubbing alcohol. The liquid consistency allows better penetration into small cracks, but such glue dries longer.

What is the price

The cost of the glue varies depending on the volume of the package and the type:

Glue Titan Wild 0.25l / 98 costs about 32 rubles;
Glue "TITANIUM builds EUROLINE No. 601" at 425 g - from 74 to 83 rubles;
Glue "Titanium univers. 0.25l "- 36 rubles;
Glue "Titanium 1 L" - 130 rubles;
Glue "Titanium S 0.25 L" - 50 rubles.

01.20.2010
Attention, fakes!

Unfortunately, cases of counterfeit products from unscrupulous manufacturers have become more frequent. This also affected our TITAN Wild glue.

At first glance, the packaging of such a fake does not differ from the original ...

Scope of TITAN Wild assembly adhesive

Repair in the modern world is not possible without the use of assembly adhesives. At the same time, the range of glued materials is so wide that sometimes when approaching the choice of brands of glue for expanded polystyrene, PVC, linoleum, wood, parquet, etc., you can "break" your head even before the start of repair work. In addition, one must not forget about the environmental conditions, remember that building glue must have reliable adhesion at various temperatures, sometimes high humidity, mechanical stress or exposure to direct sunlight.

TITAN handles this task with confidence Wild , which rightfully retains its popularity on the Russian market of construction adhesives. This waterproof and heat-resistant adhesive has unrivaled adhesion to almost all materials used in construction and renovation, as well as in everyday life:

expanded polystyrene and PVC (plastic),

linoleum,

parquet and parquet board,

ceramics and glaze,

wood and cork,

MDF,

artificial leather,

glass,

paper,

the cloth,

carpet and other floor coverings

Assembly glue is used for gluing materials to each other (in different combinations), as well as for gluing to concrete, cement-lime, gypsum and plaster surfaces.

TITAN glue application Wild finds a place both in domestic needs and in industrial / production purposes.

TITAN Wild universal adhesive can be used as ...

For gluing decorative polystyrene ceiling tiles glue, as a rule, is used transparent polymer without filler. Titan ceiling adhesive is transparent in color, so it will not damage the presentable look of even the most expensive ceiling tiles. TITAN polystyrene foam adhesive is ideal for any products made ofpolystyrene (foam).With it, the ceiling tiles are glued in an instant and forever!

adhesive for floor coverings. TITANIUM is ideal for bonding floor coverings such as linoleum, carpet, laminate, plywood, cork boards and carpets. The assembly adhesive is able to withstand heavy loads, does not peel off even after a long time.

parquet glue. It is believed that parquet is a rather capricious flooring material, and only substances specially designed for this must be used for gluing it. Universal adhesive TITANIUM breaks stereotypes, it copes well with any task, including the installation of parquet boards.

MDF, PVC and other wall panels … There are many assembly adhesives that specialize in these materials. But if you have TITANIUM at hand, there is no need to make additional expenses, it will easily cope with the above materials, replacing any so-called. "liquid Nails".

This is just a small list of how you can use this universal glue... You can apply it if you want at home(for repairing shoes, "resuscitation" of broken furniture, when repairing your car, etc.). Properties such as moisture resistance and elasticity allow the use of TITANIUM as sealant.

In general, show your imagination, and TITANIUM will cope with any task assigned to it!