Drawing of a garden table made of wood. We make a beautiful and strong country table with our own hands. Folding garden table

We will send the material to you by e-mail

Not everyone likes to buy finished products for home use. The soul of some people requires creative and practical self-realization. The editors of the online magazine, the site invites those who wish to learn how to make a table out of wood with their own hands, what is required for this, and whether there are pitfalls in such work.

Beautiful wooden product for the kitchen or living room, made with love

Our step-by-step recommendations are unlikely to be useful to professional carpenters, but advice to novice amateurs will come in handy. To begin with, consider what products you can make with your own hands from wood.

Of course, the more skills a person has, the more difficult the model he can make. But in order to build a table with your own hands from wood, there are ready-made drawings and photos to help beginners.

How to choose material for self-production of a wooden table for home and summer cottages

What to make a dining table with your own hands? Best of all - wood. The most pliable for the newly-minted master will be a pine tree. Poplar products will look more solemn. For the street, you can take mahogany.

If you want an option for home and easier, then you should consider laminated chipboard with an optimal thickness of 25-35 mm. On the countertop, you can take wooden boards, birch plywood with a thickness of 35 mm. The legs can be made of metal or timber (about 50 mm thick).

In order not to be mistaken with the amount of material, they make a preliminary drawing of the future structure with exactly the specified dimensions.

Advice! Suitable product heights vary between 750-800 mm.

Related article:

DIY furniture made of wood: for a garden, a nursery, a kitchen, a bath, a garden, a gazebo; how to restore pieces of furniture, useful tips and advice from experts - read our publication.

What tools are needed to make a wooden table with your own hands

It doesn't matter what shape the future table will be: working with wood requires a certain set of tools. You can't do without a jigsaw, and it will be much easier to work with an electric model. To fix all structural elements, either a drill with a multistage drill for holes or confirmations is used. To polish the product to perfection, you need either a special drill bit.

For greater fastening strength, wood glue is included in the tools.

How to make a wooden table with your own hands - step by step instructions

We have selected four types of structures that you can make on your own, even with a minimum of carpentry skills. We invite you to learn about the stages of making a round and rectangular table, a coffee table and a model for a garden gazebo.

Making a wooden round table

The easiest way to make a round table top and tie ring is from or in sizes 1500 × 1500 mm and 1280 × 1280 mm. You will also need two laminated chipboard strips (1110 × 120 × 25 mm). We will make the legs from four wooden blocks with dimensions of 120 × 50 × 750 mm.

How to make a countertop

How to draw a circle perfectly straight? On a sheet of plywood in the center, place your own thumb with a string and a pencil attached to it. The length of the rope from the base to the top should match the radius of the future countertop. Holding your finger in one place, draw a circle around the full length of the rope with a pencil. It remains to cut it out with a jigsaw.

The circle underframe is cut out in the same way.

Making legs

A round table made of wood or chipboard will look charming if you do everything consistently. You won't have to bother with the legs if there is no excessive originality in the plans. The bars are divided into 4 parts according to the desired size of the table height minus the thickness of the table top. First, one leg is cut off, and the other three are already aligned along it.

All processing with a grinder is carried out immediately.

Advice! You can't rush to sanding, since the first varnish will reveal all the flaws.

Assembly of the structure and processing of the finished product

The assembly is carried out in stages. First, the strips are aligned groove into groove. Then the crosspiece of the slats is connected with the legs with confirmations, as in the figure below:

If you want to make the structure stronger, before connecting the legs to the table top, their upper base is coated with glue.

Advice! Nails are not used in such work: a self-tapping screw or confirmat can be unscrewed without problems, and the connections will be much stronger.

Making a rectangular wooden kitchen table

The rectangular design is classic and very useful in everyday life: it is convenient to cook on such a table and you can comfortably dine at it.

How to make a countertop

The table top made of wood for the table is made either from a whole sheet of plywood, or from individual edged boards processed to perfect smoothness.

Having fastened the boards with screws and glue, they begin to make the frame.

Making wooden legs for the table and frame

At the heart of the quadrangular models is the wireframe. It serves to securely fix the legs, ensuring the stability of the entire structure. Turn the tabletop over, measure 3-4 cm deep on each side and transfer the measurements to the boards. As a result, you will need two boards of shorter length and two more.

The frame is made of four elements: according to an approximate ratio, these are two boards of X cm and two of 2X cm. They are connected to each other with an overlap alternately, building a rectangle. In order not to break the angle of 90 °, any board is used while working with a screwdriver: they press the structure with it while tightening the screws.

As soon as the frame box is ready, the legs begin to be made. You can take ready-made balusters for the table, buy metal supports, or cut them out of bars according to the desired length according to the drawing.

Both the frame and the legs must be carefully polished!

Product installation and final finishing

The frame is screwed to the tabletop with glue or self-tapping screws. Then the product is turned over and the legs are attached.

Important! Better to make the screw holes well in advance. This eliminates the possibility of splitting the tree.

Why not use nails and a hammer? Not everyone knows the skills of working with a hammer - here it is dangerous not only to knock on the finger. Excessive zeal can easily damage wood by splitting it. Confirmates and self-tapping screws hold the tree much stronger.

As soon as the leg is fixed, the angle is immediately checked: there should be no deviation from 90 °. The operation is repeated with other legs. It is possible to attach the legs directly through the countertop, but this will affect the aesthetic component of the product.

Related article:

: photos of the best ideas. What can be made of pallets for an apartment, office and summer cottage; rules for the selection and handling of pallets; master classes on making a table, sofa, bench, armchair and rack - read our publication.

DIY wood coffee table

Not only a beautiful element of the interior, but also a useful one. No need to look for where to put a book, gadget, glasses, TV remote control in a prominent place. Such necessary structures are made from different materials: metal, glass, plastic, laminated chipboard, wood. But let's leave the other materials alone and concentrate on working with wood.

The choice of a wooden tabletop for the table depends on the expectations of the owner of the product. Someone wants something massive, while others prefer light options. Let's dwell on a simple solution.

We buy five boards 30 × 150 mm and process them to perfect smoothness. We immediately saw off the desired length on the countertop: you should get 6 identical canvases. We take four bars on the legs, 6 sheets of shorter length on the lower tabletop, 4 narrow slats for the frame.

Illustration	Description of action
	For brushing wood, use a grinder with a brass brush head. The procedure will expose the structure of the wood, giving the product a special flavor.
	We go back and forth along each board from the side that will be the front.
	We process the tree with fire. The flame is gradually moved from place to place: the board will acquire a beautiful darkish tint. The procedure will permanently destroy unnecessary soft wood fibers. We actively wipe the entire surface with a felt boot or a piece of felt.

We begin the process of assembling a small table with our own hands from wood.

The lower and upper countertops are laid on the work surface with the wrong side facing you. Boards are stacked tightly to each other, gluing them together. As soon as the boards grab, the slats are attached to the top tabletop. They will serve as a frame and fastening element. They can be glued or screwed on with self-tapping screws. A self-tapping screw is screwed in the center of the rail into each of the boards.
The legs are screwed to both the table top and the slats. You can use the furniture corners.

Video: the process of making a coffee table made of wood

DIY wood table with benches in the gazebo

It's time to set aside time and build a wooden garden table.

It is best to take boards of standard sizes. Studs (suitable with a length of 16 cm), washers (24 pieces) are purchased at a hardware store. For a garden gazebo, long nails (8 cm) will do.

To paint a product or simply to varnish it is already a matter of taste.

(1 estimates, average: 5,00 out of 5)

There is a table in every home. In summer cottages and in private houses, it is customary to install street models that can be moved around the territory and placed in gazebos and on verandas. A wooden outdoor table for a summer residence is made by hand according to a developed drawing or a ready-made model is purchased. The product is made of quality material, adhering to the basic rules of manufacturing.

Model types

Tables can be of any shape and size. For their manufacture, different materials are used: wood, plastic, metal. Types of models depending on materials:

Plastic. Products made of plastic are a budget option: lightweight, compact, and, if used correctly, have a long service life. This is an ideal country furniture option for 6-8 people. The shape of the table is round or oval. Direct sunlight destroys the material, which is one of the disadvantages of plastic furniture. The table is installed in a closed area or securely fixed, since due to its light weight, strong gusts of wind can turn it over.
Wood. In country design, wooden tables for summer cottages are very popular. These are expensive models that are in perfect harmony with garden plantings. Products must be periodically treated with an antiseptic, since wood is destroyed under the influence of humidity and temperature extremes. Table legs dug into the ground are susceptible to rotting.
Metal. Metal products are highly durable, durable in use and tolerate any climatic changes well. This is a heavyweight furniture that perfectly matches wrought iron railing and other decorative elements. Metal is often combined with glass and wood, making a tabletop out of them. To give stability, the legs of the table are buried in the ground.

Before purchasing a finished model, consider the following:

product dimensions;
place of furniture installation: in the house or on the street;
number of seats;
the cost of the product.

From what to make a table on the street with your own hands, everyone chooses for himself according to the availability of available material.

Step-by-step table making

Outdoor tables for summer cottages made of wood are made independently with minimal cash costs. First you need to prepare a drawing. To build an original product with optimal dimensions, they come up with the shape of the tabletop and frame on their own. Standard tables have a size of 178x95x77.5 cm. When preparing a drawing, you must adhere to these numbers. To work, you will need the following tools and materials:

boards - 2 pcs. (0.85 × 0.1 × 0.025 m) and 2 pcs. (1.53 x 0.1 x 0.025 m);
boards - 4 pcs. (1.68 × 0.1 × 0.025 m) and 4 pcs. (0.75 x 0.1 x 0.05 m);
boards - 17 pcs. (0.95 x 0.1 x 0.025 m);
drill, saw;
building level, tape measure;
fasteners;
pencil;
glue;
varnish on wood, brushes.

Of the means of protection, gloves and goggles are used.

Preparation of parts

All table elements are made of solid wood. The parts must be even, so each of them is carefully leveled and sanded. Then they are treated with antiseptic agents. Oil-based waterproof compounds cannot be used. Despite its protective qualities, the substance is highly flammable and emits an unpleasant odor that does not disappear for a long time. For additional protection, the material is covered with a glazing antiseptic. In addition to protective properties, the product gives the product special decorative qualities.

Assembling the frame

All prepared boards for the table top and furniture legs are attached to the frame base, so they begin to assemble the table for giving with their own hands from it. The assembly is done on a flat surface:

For the frame, end boards are used with a size of 0.85 × 0.1 × 0.025 m and 4 longitudinal - with a size of 1.68 × 0.1 × 0.025 m.
The end parts are fixed with self-tapping screws on the longitudinal boards. The frame must be flat, without distortion.
To give the frame additional rigidity, a second pair of boards is fixed - 1.53 × 0.1 × 0.025 m in size.With these elements, the attachment points of the legs will outwardly be invisible. Before fixing the boards, the base is checked diagonally for skew.
Boards measuring 0.95 × 0.1 × 0.025 m in the amount of 17 pieces are intended for tabletops. They are fastened with self-tapping screws or galvanized nails, leaving a gap of 5 mm between them.
To make the product conveniently stored and transported, the legs are bolted to the tabletop. It turns out a removable model.

Mounting amplifiers will make the structure more durable and massive. The table is turned upside down, transverse reinforcements are nailed to the center of the tabletop. To save free space, their corners are cut down. Several curved amplifiers are nailed to the sidewalls. They must conform to the shape of the crossbars of the table top.

Protective covering

Any wooden structure that is used outdoors is prone to rotting. Sun, rain and other adverse conditions are bad for her. You can protect wood furniture and extend its lifespan by:

special film casings;
impregnations;
polyurethane film.

The film based on polyurethane is the most popular, but over time it wears out, loses its properties and spoils the appearance of the product. If oil mixtures and repellent solutions are used for protection, they must be renewed regularly.

We continue to equip the summer cottage. Today we'll talk about how and what to fill the dining area or recreation area. It is difficult to imagine a cozy gazebo or shade canopy without a table and comfy benches or chairs.

Today, garden furniture manufacturers offer a huge variety of tables: large and small, wooden, wrought iron, wicker or plastic.

Of course, you can buy a finished product, but many people prefer to make garden furniture with their own hands.

How and from what material to make a table, how to decorate a tabletop will be discussed in this article.

Outdoor table for giving made of wood

Undoubtedly, wood is the most malleable and environmentally friendly material. A wooden table can be made round, square, rectangular or irregular, it all depends on the size of the gazebo or the number of seats. You can use a regular stump as a tabletop leg.

The shape and appearance of the table largely depend on the style of your country house and exterior. A log cabin can be supplemented with furniture made from logs and planks. The main tool for processing parts is a sander, since the surfaces of the table top and benches should be smooth, without chipping.

The tabletop can be made from slats or narrow boards by stringing them on metal rods, or by connecting them using short slats.

A table made of wooden cuts looks interesting, especially if there is one on the site.

There are several ways to make such a table:

connect the cuts together with staples or tongue-and-groove joints, forming a flat surface;
fix the cuts on any base (in this case, the parts must be of the same thickness to form a flat surface). The product must be sanded and varnished. If desired, the gaps between the cuts are filled with epoxy resin, after which dries, the surface is sanded again and covered with a protective compound.

A garden table made of wood with benches, made in a single structure, looks great both in the gazebo and in the open area.

It is not difficult to make it. Use the diagram below to make your own drawing and calculate materials.

When drawing up a drawing, consider some generally accepted standards:

bench seat height from ground level - 400-500 mm;
seat width - 300-400 mm;
table top height from floor level - 700-750 mm;
tabletop width - 580-900 mm.

The length of the table and benches is individual. The figure shows an example of making a table with benches located on two long sides of the table top. Similarly, you can make a structure with benches on four sides.

And here is a variant of a small round table with stationary stool benches for four seats. It is easy to move it to the right place at the moment: to an open area, under a shed or into a house.

If desired, you can purchase or make your own folding garden furniture, which can be easily installed in any part of the garden or in the house.

Such furniture will last longer, as it will not be constantly exposed to atmospheric precipitation. The weight of such products is small, they can be easily and quickly transferred to a permanent storage place in a house or shed, where they will not take up much space.

In order for the product to serve for a long time, all wooden elements must be treated with an antiseptic and varnished, waxed or painted. Use wood stain or special pigment impregnation to give the wood the desired color.

Garden table made of scrap material

Earlier we have already talked about the furniture made. A stylish table made of pallets is cheap and looks organically on the backyard. The design, complemented by furniture wheels, is also mobile.

Ordinary stumps decorated with mosaics look very original and can serve as a small table or stools in a seating area. For mosaic decor, various tiles left over from repairs, chopped into small fragments and laid on tile glue or cement mortar, are suitable.

The originality of this composition lies in the creative approach of the owners. The most common stumps turn into a work of art.

An old, worn-out table can also be decorated with mosaics and thereby renew the tabletop. Old paint must be removed from the legs, sanded and painted again. Such a garden table will serve the owners for a long time and will gather the family around it for lunch and tea.

A wooden reel for winding a cable can also serve as a table, it is enough to process it and decorate it a little, or just paint it in the desired color. The table will be easy to move if the wheels are attached at the bottom.

Many have inherited things, as they say: it's a pity to throw it away, and nowhere to put it. Try to be smart and use them when arranging a summer cottage. As legs for the table, you can use the base of an old sewing machine, metal headboards and much more. By the way, you can simply buy a countertop and install it on top of a metal structure.

Those with weaving skills can make vine garden furniture with their own hands. If you are not capable of such feats, but are very fond of wicker products, then you should go to the store. Manufacturers offer tables and chairs made of wicker, rattan or artificial fibers for every taste and budget.

Metal garden furniture

If you are "friends" with metal, have a welding machine, then you can make garden furniture from this material. Such furniture, as a rule, is delicate and original. In order for the product to serve for a long time, the metal must be protected from corrosion before its operation. One of the simplest ways to protect metal surfaces is a primer, which is applied to the product before finishing painting.

Forged furniture for a summer residence is an excellent solution for respectable home owners. Such can only be made by blacksmith forging masters with the appropriate equipment and the presence of a forge.

Forged products go well with many materials: wood, glass, marble. If you wish, you can purchase a forged blank for the table, and fill it yourself.

Stone table

Recently, small architectural forms made of stone are gaining popularity. Including on sale you can find tables and benches made of marble or granite. Such products are expensive.

But this is not the only solution. You can independently make a stone base of a table and benches, for example, from quarrystone, limestone, brick or blocks, fitting them into the overall look of the garden, combining them with other stone buildings.

As you can see, there are quite a few options for arranging a recreation area on a personal plot: from cheap, practically worthless, to expensive. A table made with love will surely gather wonderful people around it, and joint gatherings will deliver pleasant moments.

A wooden outdoor table for a summer residence can be made with your own hands. For this, ready-made or independently developed drawings are used. To make a beautiful wooden table yourself for outdoor use, you need to purchase high-quality material and follow the manufacturing rules.

A beautiful and comfortable country table is an indispensable attribute of a summer vacation. When choosing a finished product, you need to decide on the dimensions, and also with the following parameters:

using a piece of furniture outdoors or indoors;
the maximum number of people able to sit at the table;
the budget allocated for the acquisition.

The tabletop and body of an outdoor piece of furniture can be made of different types of material:

plastic models are ideal for use in the country. The advantages are affordable cost, relative compactness and lightness. They are usually round or oval in shape and can accommodate about six to eight people. Despite the stylish appearance, they are characterized by not too long service life. The disadvantages include the tendency to destruction as a result of the negative effects of direct sunlight. Also, a lightweight structure can turn over in case of strong gusts of wind, the need to use the most flat surface for installation and susceptibility to damage, which is accompanied by a rapid loss of the original aesthetic appearance;

wood models look very organic even in a modern suburban landscape. Such pieces of furniture perfectly complement the garden plantings. Such models belong to the category of rather expensive ones. The disadvantages of natural wood include the ability to collapse and be warped under the influence of water and temperature extremes, and the legs pressed into the soil can rot, therefore, it is required to regularly carry out treatment with antiseptics;
graceful metal models are of high quality and incredible durability. Such furniture looks especially beautiful against the background of forged fences and decorative elements. Such tables are notable for their considerable weight, as well as very high cost. Very often modern models are a very successful combination of metal with wooden or glass countertops.

If you plan to use the table in suburban conditions all year round, then the best option would be a metal structure, which is very resistant to any unfavorable external factors. The legs of the metal structure can even be concreted, which will give additional stability to the piece of furniture.

How to make a wooden table for a summer residence with your own hands

Tables made of wooden planks are very often self-made. Of course, this option will require sufficient care throughout the entire period of operation, but it will give the adjoining territory in the country a bright style and originality. Among other things, you can build the simplest models with your own hands with little time and money, even in the absence of professional skills and special tools.

Making a drawing of the table with dimensions

The self-assembly scheme may already be ready, but in order to get the original table with the most suitable dimensions and shape of the tabletop, you need to complete the drawing yourself. When drawing up a drawing, it is recommended to focus on the standard dimensions of such a piece of country furniture 178x95x77.5 cm.

Required tools and materials

To make a beautiful and practical wooden table for a summer residence, you need to prepare:

roulette;
pencil;
saw;
drill or screwdriver;
building level.

Work must be carried out in standard goggles and gloves. When making you need to use the building materials presented:

a pair of boards with dimensions of 85x10x2.5 cm;
a pair of boards with dimensions 153x10x2.5 cm
four boards with dimensions of 168x10x2.5 cm;
four boards with dimensions of 75x10x5 cm;
board 95x10x2.5 cm - 17 pcs;
fastening tools in the form of nails, screws and bolts;
glue for woodwork.

It is also necessary to purchase antiseptic compounds for wood processing, varnish for wood or special paint and brushes in advance.

How to make a table with your own hands (video)

Getting Started: Making Wooden Outdoor Table Parts

All elements in the form of wooden planks must be flat, of natural moisture, from high-quality hardwood. If necessary, before assembly, the boards must be aligned and, if necessary, sanded. To get a durable structure, you should carefully treat the wood with antiseptics.

It is not recommended to impregnate wood with oil compounds., which have proven themselves very well when operating in high humidity conditions, but increase the level of flammability and give the structure an unpleasant and fairly persistent odor that lasts for a long time. After applying water-soluble impregnations, it is imperative to apply a layer of a special glazing antiseptic, which makes it possible to impart high decorative properties to the product and contributes to additional protection.

Assembling and fastening the main elements

At the first stage of the independent manufacture of a wooden outdoor country table, the frame base of the piece of furniture is assembled. It is to the frame base that the boards will subsequently be fixed to create the table top and, as well as the table legs. The frame base traditionally consists of four rounded and even, longitudinal boards measuring 168x10x2.5 cm and a pair of end boards measuring 85x10x2.5 cm.

The assembly must be carried out on the most even surface, fixing the end elements to the longitudinal boards with the help of galvanized self-tapping screws and adhesive. Very important prevent the base from skewing during assembly and fastening. After checking diagonally, additional boards of 153x10x2.5 cm are necessarily fixed, which will make it possible to give the assembled structure additional rigidity, as well as hide the areas of attachment of the legs.

The table top is assembled from boards measuring 95x10x2.5 cm. The boards can be fixed with either galvanized nails or self-tapping screws. It is imperative to leave a gap of 0.5 cm between the elements of the tabletop. The legs are attached with self-tapping screws or bolted connections. The second option is more preferable and allows you to get a removable model, convenient for transportation and storage.

Installation of amplifiers - a guarantee of the durability of the table

If there is a need to obtain the most massive and durable structure, then amplifiers are used. To install such parts, you need to turn the product upside down. The transverse reinforcements in the middle of the tabletop are nailed, and the corners of the reinforcements are sawn off to save space. A pair of reinforcements with a notched cutout that follows the shape of the countertop crossbars is nailed to the sidewalls.

How to protect the table from external factors

Unfavorable weather conditions, represented by sun, rain and temperature changes, are an aggressive environment for wooden structures used in outdoor conditions. To protect wooden products and extend their service life, special film coatings and various impregnating compounds are used. The most commonly used protective films are based on polyurethane. The disadvantages of such a film coating are loss of appearance, decrease in efficiency and wear after a certain time. Impregnants for wood protection are represented by a mixture based on oils and repellent solutions. Both the one and the other option of protection from external adverse factors has proven itself well, but requires periodic updates.

Wooden outdoor table: drawing (video)

We make a wooden country table from what is at hand

As a material for creating a wooden country table, a variety of improvised means are very often used. Incredibly stylish and very reliable slab tables - an option that you can make yourself with some woodworking skills. In this case, you need to be prepared for the fact that the technology for manufacturing tabletops based on saw cuts is distinguished by its characteristic specifics and is quite time consuming, but the resulting finished product will be unique and inimitable.

Designs look very original in garden design:

from a wooden bar for true fans of natural materials;
from several stumps or bobbins;
from old window frames with glass top;
from boxes, complemented by various decorative elements;
from an old wooden chest with forged items.

Tables made from pallets are also widely used. The fashion for such products came from Asia, where such furniture items are very often made for lack of free funds. When creating such an option, you can show all your imagination, but it is very desirable to replace the nails from the pallets with self-tapping screws, and all fastenings of the frame and boards must be reinforced with special furniture corners. If desired, the structure can be supplemented with ordinary furniture wheels, which make the table mobile and easy to use.

How to make a metal table with a wooden top

One of the interesting and durable options for garden furniture. For self-production you will need:

metal pipe or high-quality rolled metal of sufficient cross-section;
primer for working with metal surfaces;
paint on metal surfaces and brushes;
chalk or light marker;
flat surface for the stencil;
wooden table top;
bars and adhesive for fixing the countertop.

The tool can be represented by a welding machine, a grinder, a metal saw, a hammer, a screwdriver, screws and bolts. The metal is preliminarily cleaned of rust and dirt with a steel brush, after which a frame is created in accordance with the stencil.

Welding must be done carefully to avoid the formation of welding build-up. The entire structure is cleaned with a metal brush, after which it is primed and painted. After the paint has completely dried, the tabletop is fixed, which also needs to be treated with special antiseptics, and then varnished or painted.

Diy log table (video)

Self-production of country furniture from wood is a very interesting and creative process, accessible even to beginners. Such a natural material goes well with metal, glass, and plastic, which allows you to create original, unusual and very decorative solutions with your own hands.

How to make a country table

The arrangement of a summer residence is an ongoing process. You build something, then you improve it. Moreover, furniture is constantly required and tables are most in demand in the country. And put in the garden, and near the house, and also in the gazebo. We will tell you how to make a table for a summer residence with your own hands in this article using the example of ready-made projects.

Homemade table from pallet boards

Disassembled pallets served as the material for this table. Naturally, new boards can be used. There is only one condition - they must be dry. You can buy dry ones (this is more expensive) or buy ordinary ones, put them somewhere in ventilated piles and keep it that way for at least 4 months, or better - six months. Any furniture in general, including garden benches. made from dry wood.

We assemble the table for the street - put it in the gazebo, so we will not glue the boards of the tabletop, but we will fasten them from below with the help of planks. This is a very simple country table and very cheap.

Having disassembled the pallets, we get boards with an individual color and pattern. Having conjured a little, shifting them several dozen times in different manners, we achieve the required result. It turns out quite a nice tabletop.

We collect the tabletop from the boards

We take the side parts of the pallet. We use them for the table frame. First we grind them with coarse sandpaper, then we bring them to the required smoothness (grain 120 and 220).

The side bars will go to the sides of the table

We take the strips that remained unused, with their help we fasten the tabletop. We place them in the place where the joints of the boards are. We use two self-tapping screws to fasten each board with a joint, one to a solid one.

From the processed sidewalls and two boards (also sanded) we assemble the table frame. We fasten its parts with self-tapping screws to the end (two for each joint). The frame can be glued or also "put" on self-tapping screws. Only their length is large. For each, we pre-drill holes with a drill, the diameter of which is slightly less than the diameter of the screws.

The table top is almost ready

Turn the assembled tabletop over and grind it. The procedure is the same - first with coarse sandpaper, then with fine one.

Next is the installation of the legs. We select four boards of the same size, check their length, and adjust if necessary. Then - sanding again. This is easier than sanding the already screwed legs. We fasten the sanded boards to the frame. These will be the legs. For each one there are two self-tapping screws fixed in a diagonal (look at the photo). For greater stability, we install jumpers at the bottom. From the floor to the jumpers, you can leave about 10 cm. We connect everything with self-tapping screws so that the boards do not crack, we pre-drill the holes.

The do-it-yourself table for a summer residence is almost ready. It remains to cover it with varnish

After removing the dust, we again varnish. In theory, the varnish should lie flat, but it depends on the wood, so another sanding / painting cycle may be needed. As a result, we get such a homemade country table.

DIY table for summer cottages is ready to use

If you don't like motley planks and old nail marks, you can make them the same design. This table can be rectangular or square. All sizes are arbitrary - see available space.

Country table from the remains of boards

This table for giving with your own hands is assembled from the remains of boards of different breeds and sizes. Pine boards with a thickness of 25 mm and a width of 50 mm were used for the frame of the tabletop, the remains of 15 * 50 mm were used for the legs. We make the frame according to the dimensions you need. This table will stand on the veranda, and it has a small width. So we will make it not wide - 60 cm, and the length 140 cm. The height of the legs is 80 cm (everyone in the family is tall).

We assemble the frame, attach the legs to it

Immediately cut off two long boards of 140 cm each.To make the width of the table top 60 cm, we subtract twice the thickness of the board used - this is 5 cm. The short bars should be 60 cm - 5 cm = 55 cm.Fold the frame, keeping an eye on the right angles, and twist it with self-tapping screws. We check if the bars were folded correctly - we measure the diagonals, they should be the same.

We cut off four boards of 80 cm each, fasten them from the inside to the assembled frame. You can have 4 self-tapping screws for each leg.

We make jumpers for the shelf

We attach the crossbars approximately in the middle of the height of the legs. This is the frame for the shelf. The shelf can be used for its intended purpose, and it also increases the rigidity of the structure. We fix it strictly at right angles, checking with a large square.

We put the frame on the floor, check if it staggers or not. If everything is done correctly, it should be rigid. Next, we take sandpaper or a sander and grind.

Let's start assembling the countertop. Planks of various types of wood were left from the finishing work, some of them were painted with wood stain. We alternate boards of different colors.

We fasten the boards of the tabletop with finishing nails, carefully finishing them off with a finishing tool. It can be fixed on the shelf with ordinary nails or self-tapping screws. Then we level with a grinder. The last stage is painting. Very unlucky with the choice of varnish. We bought it too dark, didn't like the look. We'll have to sand it again and paint it in a different color.

Homemade table for giving is ready

Wooden table with glued top

This design features L-shaped legs. They are assembled from boards of the same thickness. In this case, 20 mm. In order for them to hold well, 5 self-tapping screws are needed. Pre-drill holes with a drill with a diameter of 1-2 mm less than the diameter of the screws. Then, with a larger diameter drill, we drill recesses for the caps. The diameter can be matched to furniture plugs of a suitable color or made from a wooden rod. Another option is to use wood putty, to which add wood dust that remains after sanding. After drying and sanding, the marks will be difficult to find.

Legs with markings for fasteners

When assembling the legs, make sure that the angle is exactly 90 °. You can choose a bar as a pattern. First, we coat the joint of the two parts of the leg with wood glue, then we install the screws in the following sequence: first the two extreme ones, then the middle one, and only then the other two. After the glue has dried, the legs are sanded, varnished and dried.

Table legs are ready

It's time to make the countertop. We collect it from boards of the same thickness. We dial in the size you need. Fragments of different widths can be used. It is only important that everything looks organic, and the sidewalls of the boards are even and docked without gaps.

We coat the sides of the boards selected for the tabletop with glue, lay them on a flat surface (some kind of table) and tighten them with clamps. In this case, they cost one, but preferably - at least three. We tighten it so that there are no cracks in the resulting shield. We leave for a day. Having removed the clamps, we get an almost finished tabletop. It still needs to be ripped off - to align the edges, and then sanded. You can trim with a jigsaw or a conventional hand saw. Using a grinder is difficult to get a straight line, but you can try. After sanding, we get a beautiful tabletop.

We glue the tabletop from the boards

Using the same technique, you can make an oval or round tabletop. It will only be necessary to draw the appropriate line and end the glued boards along it.

To make the table look more attractive, let's make a frame. We take a thin strip, process it with sandpaper and fasten it around the perimeter of the tabletop. You can also use finishing nails. Only the planks are also pre-coated with wood glue, and then with nails.

We fix the bar around the perimeter

After the glue dries, we process the joint again with sandpaper.

This is the finished tabletop.

Now you can attach the table legs. We assemble a table frame from four boards (there is no photo, but you can do it as in the previous paragraph). We attach it to the back of the countertop with glue, then install furniture confirmations through the countertop. A preliminary hole is drilled for confirms with an expansion under the head. The holes for the fasteners are masked in the same way as on the legs.

We attach the legs to the fixed frame. We put them inside the frame. You can attach it with ordinary self-tapping screws. That's it, we made a table for a summer residence with our own hands.

The board table is ready

How to make a garden table from wood with benches

For this table, boards of 38 * 89 mm were used (dismantled themselves), but you can take standard sizes. The difference in millimeters will not greatly affect the results. In the photo below you can see what should turn out.

To connect the parts, studs 16 cm long with washers and nuts (24 pieces) were used. All other connections are made with nails 80 mm long.

We connect the parts of the table with studs with washers and nuts

The parts are installed in place, a through hole is drilled with a drill. A hairpin is installed in it, washers are put on on both sides and nuts are tightened. Everything is tightened with a wrench. Why is this option convenient? For the winter, it can be disassembled and taken to a shed or garage.

Making seats

Bench drawing with dimensions

According to the drawing, we cut the boards of the required size. Everything is needed in double quantity - for two seats. We grind the boards, pay special attention to the ends.

The short sections, which we use to fasten the three seat boards along the edges, are cut off at an angle of 45 °. First, we assemble the structure that is attached to the bottom of the seat. We take a board with a length of about 160 cm, at the end to it we attach two short boards sawn at an angle. You need to attach it so that this board is in the middle.

Seat support assembly underneath

Then we attach the legs to the resulting structure (you can use nails). Then we add the boards cut at an angle and pull everything together with studs and bolts.

We attach the seat boards to the resulting structure. Since this is a table for the street, you do not need to knock them close. Leave a gap of at least 5 mm between two adjacent ones. We nail it to the supports (which are cut down), two for each board.

We fasten the seats together

We fasten the finished seats with four boards 160 cm long. We fasten each leg with studs (if you walk, you can put two studs by placing them in a diagonal or one above the other).

We connect the legs to the boards using pins

Putting together a table

The table is assembled in a different way. Please note that for the countertop, the transverse boards are sawn at the edges at 52 °. We attach them at such a distance that the legs enter. Each board has 2 nails. You can finish, with small caps, or you can hammer in deep, and then mask the holes with putty.

How to make a wooden outdoor table

Now we need to assemble the cross-legs. We take two boards, cross them so that the distance between their ends is 64.5 cm. We outline the place of intersection with a pencil. At this point, you will need to take out the wood half the thickness of the board.

This will need to be cut

We make the same notch on the second board. If you add them, they turn out to be in the same plane. We connect with four nails.

How to make X-shaped legs for a garden table

We make the second leg for the table in the same way. We are not assembling the table yet.

Installing the table

Now you need to fix the legs to the structure on which the benches are installed. We put them at an equal distance from the benches, fasten them with hairpins.