How to clean an electric kettle inside. How to descale an electric kettle, effective methods. Special chemicals

When the water boils and evaporates, the inside of the kettle becomes covered with deposits of magnesium, calcium salts and metal particles. If the kettle is not cleaned for a long period of time, the layer of plaque becomes denser. This leads to difficult and sometimes impossible removal. The accumulated layer of plaque has low thermal conductivity and therefore the water heats up slowly. Often because of this, a breakdown of the heating element in electric kettles occurs. In addition, particles of sticky scale enter the body and adversely affect the renal and genitourinary system. Today we will tell you how to descale your kettle at home.

How to descale a teapot with folk remedies

Today, various methods are known that allow you to remove unwanted scale deposits, both with the simplest home remedies and with specialized household chemicals. For example:

vinegar
carbonated drinks (Coca-Cola, Pepsi, etc.),
special means,
citric acid
soda,
brine

Descaling with vinegar

Now you know how to descale a kettle using vinegar.

Using carbonated drinks for descaling

Many have heard that rust with scale can be removed with our favorite carbonated drinks: Sprite, Fanta, Cola. Thanks to their aggressive properties, you can easily descale the inside of your kettle. However, this method cannot be used to clean electric kettles. The use of these drinks leads to their malfunction. It is better to clean the deposits from the inner surface of the enamel teapot with a colorless "Sprite". After colored drinks, it is possible to cover the enamel with colored stains.

Before cleaning, the sweet drink must be opened and left until the gases are completely released. After that, the container is half filled with soda and begin to boil within a few minutes. Then the liquid must be poured, the kettle must be thoroughly rinsed. For greater confidence, the cleaning procedure is repeated.

How to descale a kettle using special products

It is possible to remove scale inside the teapot not only with folk remedies, but also with chemicals. Use the contents of the sachet strictly in accordance with the instructions on the label. At the end of the procedure, it is necessary to remove the residual chemical from the kettle by repeatedly boiling the water.

How to clean a kettle with citric acid

This cleaning method is suitable for conventional and electric kettles. But how to clean a kettle with citric acid at home? One or two teaspoons of citric acid are mixed in one liter of water. The solution poured into the kettle should be boiled for several minutes. In case of bad delamination, the liquid is not drained, but left for an hour. With insignificant deposits, you can not boil the citric acid solution, but simply leave it for two to three hours. To clean the leftovers, you need to take a hard sponge, wash the dishes from the inside, add water and boil repeatedly.

Soda as the most affordable descaler

The older generation knows very well how to descale a kettle with regular baking soda (sodium bicarbonate). Soda is a finely ground white powder. The ingestion of soda into the human body is absolutely safe for health. Soda can be poisoned only with an overdose.

Baking soda has unique properties and can effectively clean up a wide variety of household contaminants along with the popular publicity products. Soda has the property of breaking down solid deposits of magnesium and calcium salts. As a result, the stone scaled layer softens and is removed from the surface.

To clean a metal kettle with soda, 1 teaspoon of the powder is mixed with 4 cups of boiling water. The dishes are placed on low heat for 30 minutes. When the solution with soda boils, it is necessary to control the condition of the contents. If the water boils off completely, soda will settle on the walls and the kettle may burn out.

After the boiling time has elapsed, the fire under the kettle turns off. The dishes are washed, water is poured into it and boiled for half an hour. It is better to repeat the last procedure again to completely clean the walls from sediment with soda. Otherwise, the taste of the brewed tea may deteriorate.

Descaling with an intense attack

When using the kettle for a long time without cleaning, it is recommended to use the so-called intense attack. It is strictly forbidden to clean electric kettles in this way.

A bowl of water with 1 tablespoon of baking soda is placed over high heat until it boils. After boiling, it lasts 30 minutes over low heat. Then the solution is poured, water with 1 tablespoon of citric acid is poured into the kettle to the brim. The resulting solution is boiled for 30 minutes. The process is repeated once more, but with 1/2 cup of vinegar. Usually, in this way, all the scale is removed without residue, or it becomes loose and can be washed off with a sponge.

Descaling with brine

You can effectively remove the scaled layer with tomato and cucumber pickle. It is poured into a kettle and boiled for half an hour. Further actions are the same as in the methods described above. The acid content helps to get rid of hard deposits of salts on surfaces and rust.

Before you get rid of limescale in the kettle, be sure to warn your family about your intentions so that there is no chance of anyone accidentally eating the contents. We wish everyone to drink exceptionally good quality water.

Of course, you can periodically remove the scale in the kettle, but it is better not to bring it up to its formation. For this, timely prevention should be carried out. An example of the simplest and most economical method:

Filling the kettle with filtered water. However, over time, scale will begin to appear, but it will not be so significant.
After using water, its remains must be poured out of the kettle. It is undesirable to store water in it for a long period of time, especially throughout the night.
Be sure to wash the outside and inside of the kettle every day with a non-metallic, hard sponge to avoid damaging the enamel finish. In case of a catastrophic lack of time, get rid of the scale once or twice a month. Remember! Removing a thinner layer is much easier!

I hope the above cleaning methods helped you solve the problem of how to descale the kettle at home without using expensive household chemicals.

Why is scale dangerous?

Some people care little about the issue of scale, and they do not even suspect that they need to get rid of it as soon as possible. Limescale or scale is deposits on the inner surface of the dishes of magnesium, calcium, iron and some other salts. Plaque forms gradually, deposited in layers on the walls or on the heating element. It is formed if the tap water flows of medium hardness or hard (the indicator exceeds 4 mg-eq / l). If the scale is not removed in a timely manner, then with further boiling of water, part of the salts dissolves and enters the human body. Over time, an excess of salts will inevitably lead to diseases of the bladder, kidneys, bones, joints.

In addition, limescale has a low thermal conductivity, so the water in such kettles boils more slowly. Often, scale leads to a breakdown of the heating element in an electric kettle, because in order to boil the water of a steel spiral, you have to warm up to temperatures unusual for it. This leads to a malfunction and, as a result, to breakdown.

Methods for cleaning metal and enameled surfaces from scale

How to descale a kettle that boils water on gas or on an electric stove? In this case, it is much easier to cope with the problem, because the metal withstands well the effects of both acids and alkalis.

Vinegar

Removing limescale with table vinegar is the easiest and most effective method. In a separate vessel, it is necessary to prepare a solution: 1 liter of cold water and 100 ml of the substance. Next, pour it into a kettle that needs cleaning and put it on fire. In this case, the fire should be low so that the water boils slowly, gradually dissolving the limescale. As soon as the liquid boils, you need to carefully open the lid and observe the process of the scale peeling off. In especially difficult cases, keep boiling for 10-15 minutes. Then pour out the contents of the kettle, and remove the remaining plaque with a hard sponge. Further, the kettle should be filled with clean water, boiled and poured out without using it in food. For greater reliability, it is recommended to boil the water again and pour it into the sink. It should be remembered that vinegar contains acid, so all actions must be performed carefully.

When opening the lid at the moment of boiling of a solution containing acid, it should be remembered that vapors can cause burns to the eyes and skin. For this reason, it is not advisable to lean too low.

Soda

How to descale a kettle with soda? The cleaning principle is similar to the method described above. Cold water is poured into the kettle, 25 g of soda is added and put on fire. As soon as the water boils, the fire is turned down. Over low heat, the water should boil for another 30 minutes. After that, the contents are poured out, the container is thoroughly cleaned and rinsed. Further, in a kettle, you need to boil water 2 times, but do not use it for food.

Vinegar, soda and citric acid

How to descale the kettle in severe cases? If the water is in a region of increased hardness, then limescale deposits on the walls of the dishes very quickly, hardening more and more every day. In this case, the fight against scale will be long and persistent. Pure water is poured into the kettle, 25 grams of soda is added, brought to a boil, after which it is continued to boil for 25–35 minutes over low heat. Then the soda solution is changed to pure water, to which 25–30 g of citric acid (crystals) are added. The solution is boiled in the same way, then discarded again. The final stage is a vinegar solution, half a glass of the substance is added to the volume of a standard teapot (2.5 l) and boiled for 30 minutes. As a rule, this method gives very good results, although it is time-consuming. If the plaque does not come off on its own, then after the procedure it will become looser and can be easily removed with a sponge.

After the kettle has been descaled, it is rinsed in running water and boiled a couple of times, pouring the contents into the sink.

Less popular folk ways

In addition to the ones listed above, there are several more interesting ways, and many housewives claim that they are no less effective. In addition to vinegar or soda solution, you can use soda and cucumber pickle.

It is better to take a soda of a light shade, for example, "Sprite", so as not to accidentally paint the surface of the teapot. Before pouring the soda, you need to wait for the bubbles to come out of it, and for this you should leave the bottle open for a couple of hours. The kettle is 2/3 full and put on fire. As soon as the soda boils, it is poured out. This method can remove not only scale, but also rust. The brine from under canned vegetables acts in a similar way, as it contains citric acid.

Another unusual method is the skins of raw potatoes, apples or pears. How to descale the kettle using the peel? The "skins" are placed in the kettle and poured with water, after which it is brought to a boil. Further, cleaning must be left for a couple of hours so that the acid in the peel begins to act, and only then wash the container. This method is less effective and is only suitable if the limescale is insignificant.

How to descale a plastic kettle?

You cannot use vinegar and soda to clean plastic, but citric acid can handle scale perfectly. The method described below can also be used to remove limescale on metal surfaces.

If only a thin layer is visible on the surface, then boiling can be dispensed with. It is necessary to take a liter of water and dilute 20 g of citric acid (crystals) in it, pour the resulting solution into a kettle and leave to act. Usually 3-4 hours are enough, after which the scale will exfoliate on its own. If this does not happen, then you can turn on the kettle and bring the solution to a boil. After such a procedure, the plaque from the plastic can be cleaned without much difficulty.

Teapot care features

To avoid the question of how to descale the kettle, you need to regularly look after it. Take only filtered water for boiling, this is insignificant, but it reduces the salt content in it. If the water in the region is characterized by increased hardness, then you should not wait for a large accumulation of plaque, but remove the sediment every 2 weeks in any suitable way.

To reduce the accumulation of limescale, experts recommend rinsing the container after each boil, and then wiping the surface dry with a towel. This simple trick will help keep the dishes clean for a long time.

Video how to descale the kettle

I think that now you will not find a family that does not have a kettle in the kitchen. Some people prefer to heat water the old fashioned way using metal utensils. Those who count every minute buy modern electric models. They have both advantages and disadvantages. The water begins to boil after a couple of minutes, but scale forms several times faster. This problem is especially relevant for glass electric kettles. Their glass begins to fade due to the formed plaque, the heating element is covered with unpleasant-looking layers of scale. Because of the transparent glass, this is all clearly visible; cleaning of such a kettle has to be done several times more often. Newfangled filters will not save you from this misfortune, only to delay its "maintenance". If the heating element is not cleaned in time, sooner or later it will fail. In this article, we will show and tell you how to properly and quickly descale a glass electric kettle at home using folk remedies.

How to descale a glass kettle with vinegar.

Vinegar is an effective and cheap household remedy with many health benefits. Used to remove fungi, stains, unpleasant odors, all kinds of bacteria, in cleaning floors, carpets, etc. Today we will use it to descale the glass teapot.

1. Buy white transparent vinegar (wine or apple cider vinegar will not work for us).
2. Mix it in equal parts with water.
3. Pour into a glass electric kettle, boil our solution several times.
4. Do not pour out immediately, let it brew for 1 hour until the liquid has completely cooled.
5. Pour out and carefully wipe everything with a sponge, if the deposits were small, this will be enough, if not, then you can walk with an old toothbrush.
6. Thoroughly rinse with water, drain it after the first boil, as a characteristic aftertaste may remain.

The only drawback of this method is the unpleasant odor that comes from it during cleaning. But rest assured, it does not eat into things and quickly disappears.

How to clean a glass electric kettle with citric acid.

I think that the benefits of citric acid in getting rid of limescale are known to everyone. It is not expensive, you can get it at any grocery store. Unlike vinegar, there is no unpleasant smell when working with lemon.

Procedure.

1. Pour water into the kettle to the maximum possible level, add citric acid at the rate of 3-5 tablespoons per liter.
2. We boil our composition several times.
3. We are waiting for the water with lemon to cool down.
4. Drain and rinse under running water so that all the scum debris is removed. Then we wipe it with a sponge or in case of strong deposits, we clean it with an old toothbrush.

Worth knowing! It is not necessary to use citric acid in sachets, in powder form. You can squeeze one whole fresh lemon into a kettle or add its juice, which is sold in bottles.

Baking soda solution.

Usually every self-respecting housewife has baking soda in the kitchen. In essence, it is alkali that is not harmful to humans, which breaks up the deposited salts well; they are present in scale and are clearly visible, especially in glass electric kettles.

1. Dissolve baking soda in water, 3 tablespoons will be enough, but the more, the better. Stir thoroughly and pour our solution into a glass teapot.
2. We boil several times.
3. We are waiting for the water to cool completely.
4. Drain and clean with a soft sponge, if the deposits were abundant, use a kitchen brush.
5. Rinse thoroughly.

Soda + vinegar.

Using these two products will be much more effective than cleaning with each of them alone.

Add 3 tablespoons of vinegar and 5 soda to the water.
Pour our composition and boil it.
We wait until the water has completely cooled down, then we drain it.
We go through with a sponge or brush to finally remove all deposits.

Lemon + vinegar.

Also a very effective combination of anti-scale products.

For 1 liter of water, we add 3 large tablespoons of citric acid or squeezed lemon juice + 3 tablespoons of vinegar.
Pour the resulting solution into a glass teapot.
We set the boil mode, it is advisable to do this at least a couple of times.
We drain the solution and clean the surface with a kitchen sponge or an old toothbrush.

Lemon + soda.

In the same way, you can mix citric acid and soda, such a composition will give a double effect of descaling. Pour water into our device, add lemon juice or citric acid in powder 3 large spoons and 5 tablespoons of baking soda to it, boil several times, then rinse and go over the surface with a sponge.

Soda.

Many people know the beneficial properties of carbonated drinks that contain phosphoric acid. With their help, in addition to limescale and scale, you can also remove rust from the surface. Make sure the lemonade contains E338. Sprite is ideal for our purposes, as it is transparent and will not leave any traces, especially for electric glass kettles.

Pour lemonade into the device, you can mix it with water in proportions of one to three. We boil several times, then rinse and remove the remaining scale with a kitchen brush.

If there is heavy scale in the kettle, do not dilute the soda with water.

Alternative methods.

The well-known old-fashioned way. You can use lemon, orange, apple peels and potato peels. Load them into a kettle, fill them with water and boil several times. Then rinse and brush with a stiff bristled kitchen brush to remove all of the limescale.

Special products from the store.

Anti-scale. This product contains simple organic acids that do not harm the human body. Quite an effective remedy for those who do not want to bother with citric acid, soda and vinegar. It is cheap, in chain stores I came across small bags of 5 rubles.

Other similar means. Be careful when choosing them, read the composition. If you want to use a glass kettle to clean, make sure there is no trilon in the composition. There were times when it corroded the nickel plating of the heating element.

Prevention of scale formation in a glass electric kettle.

Scale will appear sooner or later, but you can delay its appearance for a considerable period of time, it is enough to follow simple tips.

Pass the water through a filter (eg Barrier) before pouring it into the kettle.
Small and fresh limescale deposits can be easily removed even with the simplest products. Perform maintenance cleaning at least once a month.
Do not let the water stagnate in the appliance for a long time, it is recommended to pour the water out after each use.
When making tea, you can pour a small amount of lemon juice directly into the boiling water. Thus, the prevention of plaque formation will be ensured, and you can then not cut the lemon into the tea at the exit.

Read times: 2 213

Water is fully involved in human life. Unfortunately, its quality is not always good, but this has a negative effect not only on technology, but also badly affects health.

This can be corrected with folk remedies and household chemicals. Even with stubborn dirt, simple activities do just fine.

The causes of scale formation

Limescale is hard salt deposits. When the water is heated, the salts break down into carbon dioxide and scale.

The composition of the water is determined by the way it had to go. We see a high content of potassium and magnesium on a heating device. The amount of impurities depends on the region of residence.

What is the harm of scale?

Disrupts heat transfer from hotter particles to colder ones. Because of this, the load on the heating device increases, because the heating time increases. Thus, the kettle breaks down quickly and the electricity bill goes up.
The use of additional means for cleaning the kettle, and this is a minus from the budget.
Purchase of a water filter.
The negative effect on the human body, in particular, suffers from the urinary system and kidneys.
Itchy skin.
Skin rashes.

How to descale a kettle?

Methods for cleaning a stainless steel kettle

Descaling the kettle with vinegar

This will require 100 ml of vinegar and 1 liter of water. The vinegar essence is diluted in water and poured into a kettle, after which you need to put it on fire until it boils. If all the limescale has lagged behind the kettle, you can finish cleaning. In case of incomplete cleansing, you need to wait another 15 minutes. After the procedure, you need to thoroughly rinse the kettle.

Acetic acid is obtained from edible alcohol-containing raw materials, which is why it can be used to clean dishes well without harm to health. This tool is not only effective, but also costs a penny.

Peeling the teapot from potatoes or apples. The rest of the peel is placed in a kettle of water and brought to a boil. Then the dishes are removed from the heat and washed. this method helps with a little scale.
Cucumber pickle. The citric acid included in the canning recipe eats away all plaque. The brine is poured and brought to a boil, after which the dishes must be rinsed.
Liquid sour milk. Important: milk should not turn into sour milk. It is poured into a kettle, boiled and washed.
How to clean a kettle with cola You will need water and Coca-Cola. First, the kettle is washed and only then so much cola is poured so that all the scale is covered, brought to a boil and left to cool to room temperature, then the liquid is drained, and the kettle is rinsed.

Important: if you pour the drink right away, the dishes may become stained. The dyes that are part of the composition are then very difficult to wash off.

Vinegar and soda. Soda is mixed with water to form a slurry. We wipe the walls of the teapot well with this solution. Next, a clean rag is taken, moistened with vinegar and rubbed into the first solution. At the end, the kettle is rinsed.
Toothpaste Important: you cannot use a whitening paste for this method. On the other hand, an expired product will work well. A little paste is squeezed onto the toothbrush and rubbed into the kettle. After the procedure, boil the dishes in vain and rinse.

Cleaning the enamel teapot

If you wondered, , kettle, several ways can be found here.

With a metal sponge

Pros: cleans dirt well

Cons: the enamel is broken, it hides a lot of time. Then dirt begins to clog into the cracks.

Citric acid when reddish scale appears

For 2 liters of water, 2 tablespoons of acid are taken, diluted, brought to a boil. It settles for about 20 minutes and the container is washed well.

Vinegar(both regular and apple are suitable for this) - use carefully, it can damage the enamel.

Acid is added to two liters of water, left for 30 minutes. After this time, it is placed on the stove and boiled for 10 minutes. My kettle is good.

Colorless soda

A drink is bought in the store. It is poured into a kettle, put on fire, boiled, removed from the stove, the container is washed.

How to clean a glass teapot

Vinegar essence

Take one glass of water and one vinegar, poured into a kettle and bring to a boil. Placed in a cool place, cooled and washed.

Soda

A tablespoon of baking soda dissolves in boiling water. Leave this way for 10 minutes, then bring to a boil. The liquid is cooled, the kettle is poured out and washed.

Vinegar and soda

To do this, you will need: water, 2 tablespoons of vinegar and the same amount of baking soda. The water is mixed with baking soda and vinegar. The resulting mixture is brought to a boil and cooked for 30 minutes, cool, rinse the container.

Lemon acid. The acid can be replaced with: lemon juice, wedges, oil

For one liter of water, you will need 1 tablespoon of acid (juice of 1 lemon, 1 wedge, 20 drops of oil). A solution is prepared, boiled, cooled down and the kettle is washed.

Lemon juice and vinegar

One liter of water is mixed with the same amount of lemon juice and vinegar - 2 tablespoons are enough. The kettle is boiled and washed clean.

Soda for cleaning the kettle from scale

We take 1 tablespoon of baking soda, water, citric acid. Water is poured into the kettle, soda is put in, it turns on. After boiling, the water is poured out.

Water is poured again, citric acid is poured in, the kettle is turned on. After turning off, it is necessary for such water to stand for 20 minutes. After this time, you can rinse with water and the kettle is like new again.

Oxalic acid

A small amount of acid is poured into the kettle, filled completely with water, set to boil. After cooling down, pour out the water, rinse the kettle. For this method, sorrel stalks are actively used.

Vinegar

You will need water 2/3 of the capacity of the entire kettle and acetic acid a third of the volume. The water is mixed with vinegar, the kettle is turned on. After boiling, you need to wait until the water cools down to room temperature. Then everything is thoroughly washed. This advice can only be used by those whose kettle is not made of metal.

Sparkling water without added dyes

This requires 1 liter of soda. It is brought to a boil, drained and that's it - the kettle is clean. VERY IMPORTANT: Before using soda, release all gases from the bottle.

Cleaning the kettle from limescale with citric acid

Take 1 small sachet of citric acid and water. Acid spills out into the water, the kettle turns on. After boiling, the liquid is poured out. Then pure water is boiled 2 more times. The kettle is rinsed.

Fruit peel

The peel is poured with water, the water is boiled, the liquid is drained. This method is used as a plaque prevention. These are recipes for cleansing a teapot internally. For external cleaning you can use the information collected here.

How to descale a running old kettle?

No need to throw away your old kettle. It is better to use one of the proposed options.

Soda, citric acid, vinegar

To cope with the task you need to take: water, 1 tablespoon of soda, citric acid, 100 ml of vinegar.

The cleaning procedure is carried out in 3 stages:

Water is poured into the kettle, soda is poured into it, set to boil. After boiling, the solution is drained.
Fill with water, add acids, boil and leave on low heat for 30 minutes, pour out.
Vinegar is poured into the kettle, brought to a boil, languishes for about 30 minutes, poured out. Rinsed thoroughly with running water.

After such a hard cleaning, even the most ingrained dirt will lag behind. Attention: in no case should this procedure be carried out with an electric kettle.

Vinegar, baking soda and a sponge

Soda is poured onto a moistened sponge in vinegar, rub it so that it turns into a gruel. With such a sponge, you need to wipe the dirty surface. After that, wash off the mixture well.

Soda, vinegar, citric acid, and a sponge

A kettle is taken, half of the water is poured, one tablespoon of soda is put there. We are waiting for boiling, the solution should sweat over high heat for 10 minutes. All the liquid is poured out. New water is poured, 100 ml of vinegar is added and the procedure is performed as in the first stage. The third stage: citric acid is poured onto the sponge and the kettle is wiped with it. After that, you can rinse well under running water.

Powder for washing clothes automatic and citric acid

Water is poured into the kettle, 20 grams of powder is poured, brought to a boil. Add a teaspoon of citric acid to the same mixture. Put it back on the stove, wait until it boils, set it aside, pour out the contents and rinse.

All cleaning methods presented are time-tested. Long before the manufacture of special products, they helped our ancestors.

Universal remedies

Such funds are usually bought to save space in the closet and money. But quite often they do not perform all functions so well.

Eona bio- used for washing machines, dishwashers, as well as for descaling the kettle. Available in liquid form, tablets and powder. Method of application: the product is diluted with water, boils and rinses well. Price from 62.
Calgon- for kettles and dishwashers. It is liquid and powdery. In a vessel, it is diluted with water, boiled and washed. Costs from 500.
Mister des anti-scale- clean washing machines, dishwashers, kettles. The store sells from 30 rubles. Powder and solution are prepared.
Astonish Limescale Remover- it is used as a cleaning agent for dishes, plumbing fixtures, scale in a kettle. In liquid form from 270.
Planet Pure spray- for cleaning. Liquid from 360.
Selena antiscale- removes limescale in kettles, coffee makers, irons, dishwashers and washing machines. Liquid and powder from 27.
Chistin- removes plaque in washing machines and kettles. Sold from 100 rubles. Powdered only.
Refine- for washing from 100, including from limescale.
Soda ash

After reviewing the reviews of ordinary buyers, we can say that the price does not depend on quality. The cheapest funds sometimes do a better job than expensive ones.

Special chemicals

From the list presented, you can choose a convenient option for yourself. All components that make up the detergent are aimed at fighting scale.

Frau Schmidt anti-scale. Judging by the reviews of ordinary people, the scale is removed after 8 minutes. Tablets from 100.
Clean home - liquid from 90 p.
Romax anti-scale - liquid from 50 p.
Melitta anti calc
Tytan
Domol
Avnit bugs
Pure water
Anti-scale

The principle of action of all chemicals is the same:

The substance is poured
Rubs well over the surface
Leaves for 5 minutes
The vessel is well rinsed

If the cleanser is in liquid form or tablets, then the procedure is somewhat different:

The cleaning agent is poured, a tablet is placed on the bottom.
Water is poured.
The kettle turns on.
Bring to a boil.
Washes thoroughly from chemical.

Preventing the appearance of limescale

In preparation, use water purification agents.
If possible, boil purchased water.
The kettle should always be empty and wiped dry.
You cannot reuse boiled water. It is better to drain the leftovers.
To prevent limescale, clean once a week.
When the first appearance of limescale, remove it immediately.
Rinse the inside with a sponge on a daily basis.

As you can see, there are enough cleaning and warning methods.

You don't need to spend a lot of money to extend the life of your kettle. In order for the kettle to serve for a long time, it is enough to devote a little time to it.

Moreover, such an opportunity to use the funds that every woman has available. It is worth noting that after each procedure, it is required to thoroughly rinse the kettle so that harmful substances do not enter the body.

Scale (salt sediment) disrupts the functioning of the electrical appliance, and white and red flakes fall into the cup along with boiled water. At first this layer is just a white bloom, then it turns into a stone that is difficult to remove. I will describe effective ways to descale your kettle at home.

Warn your family that you cannot temporarily use the appliance.
Pour water up to the middle of the container.
Add active ingredient.
Switch on the device.
Wait at least half an hour.
Wash the inside thoroughly.

Use more than one method to remove old fossilized deposits or try again.

Traditional effective methods

The easiest way to clean an electrical appliance at home is with the help of available tools:

Soda - softens salt deposits.
Acids - dissolve even the petrified scale.
Brush and sponge- will not damage the surface of the kettle walls, like their metal counterparts.

So, the main fighters against sediment are soda and citric acid.

Method 1: baking soda

Baking soda or soda ash will help restore cleanliness to any electrical appliance (plastic, metal, ceramic). There are 3 ways to descale your kettle with soda:

Image	Description
	Method 1 - with soda ash Recipe for multi-layer scale: Fill the dishes with water. Pour in powder at the rate of 1 tablespoon to 1 liter. Boil and leave to cool. Wash the kettle to remove any residual sediment.
	Method 2 - with baking soda and vinegar Recipe from a small layer of salts: Empty the water from the kettle. Prepare containers for vinegar and baking soda. Here, the descaling soda in the kettle works in conjunction with vinegar. Put on rubber gloves. Soak a sponge in vinegar and then dip in powder. Rub into the inside of the appliance with your own hands. Flush the appliance. Vinegar and baking soda, when combined, give a reaction that destroys salt deposits.
	Method 3 - powerful complex from soda ash and citric acid Dissolve 1 tbsp in a liter of water. a spoonful of soda and 1 teaspoon of citric acid. Pour the resulting solution into the device. Next, boil and leave to cool. Remove loose residues with a brush. Wash the appliance thoroughly. This method is not for plastic. Long-term contact with acid and alkali will destroy it. The aluminum kettle can also be damaged.

Method 2: using acids

Any stubborn deposits will easily remove acids:

Acid	Application
	Vinegar For cleaning metal, ceramic and glass electric kettles: Prepare the solution: ½ cup vinegar per liter of water. Bring the solution to a boil. Leave for an hour for loosening the sediment. Wipe the device with a sponge removing the remnants of the salt layer. Wash thoroughly. The disadvantage of this method is an unpleasant smell in the kitchen from vinegar. Ventilate.
	There are 2 types of citric acid used: powder and lemon. Cleaning instructions: Dissolve a teaspoon of powder in 500 ml of water or cut the sour fruit into 4 parts. Turn on the electric kettle. The next half hour is the time for cooling and softening of the plaque. Remove leftovers sponge. Rinse. The bonus of the method is a refreshing lemon scent.
	Descaling the kettle with oxalic acid: Pour powder into the appliance, about half a glass. After 10 minutes, fill it with water. Boil. Wash thoroughly plenty of water. For light bloom, fresh sorrel can be used: boil a few leaves.
	Lemonade contains phosphoric and citric acids eliminating sediment: Shake it up carbonated drink. Pour into the kettle. Turn on device. Leave to cool.
	Organic acid peel the apple will relieve the electric kettle from scale: Peel the apple from the peel. Fold up cleaning into the device. Fill with water and boil. Leave it overnight. Use this safe, natural remedy once a week for prophylaxis.

Method 3: combined (for a thick layer of limescale)

After such a powerful attack, all the scale will come off. This is a two-step cleansing:

Step 1: remove with baking soda and acid. Put some baking soda in a saucer, add any acid from the table. Treat the entire surface with a bloom with the resulting gruel. Rinse after 10 minutes.

Step 2: remove limescale and odors. Cut the lemon into wedges and place in the electric kettle. Boil lemon water and leave for half an hour. Wash the device from loose residues.

Various household chemicals from scale

In addition to traditional methods, you can clean an electric kettle with the help of chemical agents specially designed for this purpose.

Their main components:

Organic and mineral acids(lemon, sulfamic, adipic).
Sodium tripolyphosphate- the main product from the processing of phosphoric acid in expensive products.
Soda.

These remedies also solve the problem of how to descale an enamel teapot. Available in liquid, powder or tablet form. Use strictly according to the instructions so as not to spoil the technique.

General scheme of how to get rid of scale special cleaners:

Prepare a solution.
Boil in a kettle.
Then pour it out.
Remove limescale. Softened, it can be easily removed.
Boil clean water 2-3 times to wash out any remaining chemicals.

Output

We found out that the choice of ways to remove scale in an electric kettle is quite large. Home remedies are not inferior in efficiency to industrial ones, it is checked! Check out the video in this article, and you can ask questions in the comments.