Encyclopedia fireproof

Grundfos pumping station control cabinet. Automation and control cabinets. Hinged control cabinets Grundfos, Wilo

The principle of operation of pump control cabinets is based on constant monitoring of the change in the parameters of the connected system. The cabinet is adapted to the system operating mode and adjusts the electric motors to its current parameters. The cabinet can be controlled both manually and automatically.

Application

At the time of decision on the purchase of pump control cabinet, it is necessary to determine in the system of which type the device will be operated. Cabinets provide control of electric drives in drainage, sewage, water supply and water treatment systems. Some models are suitable for powering boilers, irrigation and fire extinguishing systems. Buy control cabinet and regulation It will be necessary for new food and chemical industries.

The control cabinet reduces the consumption of electricity, protects electric drives from unacceptable loads and unwanted operation modes. Multi-level protection prolongs the useful life of the product and, as a result, reduces the cost of purchasing new equipment.

Hinged control cabinets Grundfos, Wilo

Hitched control cabinets pumps Grundfos. The Control LC and LCD series interact with one or two pumps. The equipment has bright operating modes indicators displayed on the cabinet case. Level control is carried out by float switches. CONTROL MPC series cabinets are designed to work with a group of pumps up to 6 units. They are equipped with an intelligent Multi Pump Controls system, which adapts the pump to the current operator's operator intervention, while maintaining the maximum efficiency of the system.

Cabinet for pumping equipment Wilo is suitable for drainage, boreholed water intakes, water supply and heating systems. It also works with one pump or group of pumps up to 6 units. The device supports the alarm log, dispatching protocols and many other modern functions, including warning and alarms.

Cabinets of station stations

Automatic Control Station Cabinets are based around frequency converter . It allows you to maintain the specified values \u200b\u200bof pressure, level and water flow. The station works with a plurality of pumps at the same time and can be used as part of a complex on large water supply facilities.

Prices for control and regulation cabinets

Pump control cabinets, the price of 9900 rubles starts, is made in Germany, Hungary, Denmark and other countries. For this money, you will receive a wardrobe with the control panel for the electric motor LC A1 Alarmschaltgerot Grundfos. Santekhkomplekt offers honest prices on cabinets management Grundfos., Wilo. VAT has already included in the cost of products.

Pump control unit

Modern control units often have real softwarecorresponding to the requirements of the efficiency and safety of the operation of pumps. Depending on the purpose of a specific model and depending on the manufacturer, control blocks may have various design and sizes, and a variety of technical control and management capabilities. But even the most ordinary control unit of electric pumps is already able to replace a whole range of special equipment ... Read FULLY\u003e

Pump control system

The control system is a system intended for automatic control and protection from one to six pumps, the maximum power of which varies in a significant range. Management systems, as complex equipment used as part of pressure, circulation and drainage systems. Management systems are available in different design, including the designed for use in unheated rooms. In addition to the performance designed for different ... Read FULLY\u003e

Remote Control Kit Dia-Log Pumps

Set for remote control Dia-Log is a wireless remote control device. pumps Wilo. (Germany) with an electronic control system with an infrared interface. The remote control kit controls the operation of the pumps, the remote change in the parameters of the operating functions (transmission of the settings), as well as read, exchange and save data on the operation of pumping equipment. The set for remote control includes: - Mobile ... Read FULLY\u003e

Electric cabinet for control and protection of pumps

The cabinet is electrical (or - the switchboard) is a control device capable of controlling both one standard pump and a few. In addition, the cabinet is electrically used to protect pumps from "dry running" and from malfunctions in the power grid (short circuit, phase break, voltage drop, etc.). The switchboard is equipped with terminals for connecting control and control devices (levels, humidity and temperature sensors), as well as common ... Read completely\u003e

Electronic pump control

Electronic control of the pump is automatic control of the pump or pumps, which is carried out at the expense of modern special equipment that does not require additional maintenance or additional knowledge from the owner. Electronic control controls the start and turning off the surface or submersible pumps, Supports constant pressure during water supply, as well as if the water ends, electronic control stops the pump operation, in order to protect it from ... Read FULLY\u003e

Pump control unit

Modern control units often have real software that meets the efficiency and safety requirements of pumps. Depending on the purpose of the specific model and depending on the manufacturer, the control units may have a different design and dimensions, and a variety of technical control and control capabilities. But even the most ordinary control unit of electric pumps is already able to replace a whole range of special equipment ... Read FULLY\u003e

Electric cabinet for control and protection of pumps

The cabinet is electrical (or - the switchboard) is a control device capable of controlling both one standard pump and a few. In addition, the cabinet is electrically used to protect pumps from "dry running" and from malfunctions in the power grid (short circuit, phase break, voltage drop, etc.). The switchboard is equipped with terminals for connecting control and control devices (levels, humidity and temperature sensors), as well as common ... Read completely\u003e

Alarm for drainage pumps

Alarm kit consists of a small plastic box with a cable entrance, sirens 12V direct current and red signal LED. Alarm reacts if the volume of water exceeds the maximum permissible level. In this case, the signal LED lights up, and the alarm is published by a long sound. The active phase of the alarm operation continues until the error occurred or correcting or correcting the error. Read completely\u003e

Electronic pump control

Electronic control of the pump is automatic control of the pump or pumps, which is carried out at the expense of modern special equipment that does not require additional maintenance or additional knowledge from the owner. Electronic control controls the start and turning off surface or submersible pumps, supports constant pressure during water supply, and also if the water ends, electronic control stops the pump operation, in order to protect it from ... Read FULLY\u003e

Pump control system

The control system is a system intended for automatic control and protection from one to six pumps, the maximum power of which varies in a significant range. Management systems, as complex equipment used as part of pressure, circulation and drainage systems. Management systems are available in different design, including the designed for use in unheated rooms. In addition to the performance designed for different ... Read FULLY\u003e

Remote Control Kit Dia-Log Pumps

The Dia-Log Remote Control Kit is a Wilo (Germany) remote control device with an electronic control system with an infrared interface. The remote control kit controls the operation of the pumps, the remote change in the parameters of the operating functions (transmission of the settings), as well as read, exchange and save data on the operation of pumping equipment. The set for remote control includes: - Mobile ... Read FULLY\u003e

Similar publications