How to make a wooden box with your own hands. How to make a wooden box with your own hands How to make a wooden box with a lid

This article is about how to do wooden box for tools. If you have a lot of tools and want to keep them organized, the best thing you can do is create a simple toolbox out of wood. From our experience, we find them very useful as they are lightweight, durable and provide plenty of space for storing tools. Don't forget that you can adjust the size and design to suit your needs.

The main components of the tool box are made from 20mm boards as they have a beautiful appearance, and very durable. In addition, we recommend that you glue the joints and fasten everything with cuts. Try to screw in the cuts themselves as symmetrically as possible.

Once assembly is complete, you will need to sand the entire surface of the box. Make sure all edges are smooth, otherwise you may hurt your hands on the sharp edges. Also, be sure to check that all screw heads are flush with the wood surface. Get rid of dust and shavings before painting.

To make a wooden tool box, you will need the following:

Materials

Tools

• Protective gloves, glasses
• ruler,
• Chalk, tape measure, level, carpenter's pencil
• and drills

Adviсe

• Pre-drill holes in wood components before installing screws
• Make a handle from a cylindrical stick

Time

• 1 hour

Box decoration

Making a simple wooden tool chest is one of those projects that can be done in less than an hour, but it can make your life easier, especially if you work with tools a lot.

Smart Tip: Before joining the parts, add a little glue to the joints. Immediately remove excess adhesive with a dry cloth, otherwise it will be difficult to remove once it dries.

The first step of the project is marking. As you'll see in the next step of the project, we'll be using 1x8 boards to make a toolbox. Therefore, you should use a carpenter's pencil and a straight edge to mark the lines on the wooden boards.

In order to get precise cuts, we recommend using an electric jigsaw or a good circular saw. Make sure the saw has smooth teeth, otherwise it may tear off the edges.

Smart Tip: Also, make sure the blade will fit exactly along the cut line before sawing.

The picture shows all the components needed for the box. Circular machine can make the job easier since many cuts need to be made at an angle.

You should use this plan when making the components for the box. Make sure you double check all measurements, otherwise the components may not fit correctly.

After creating the wooden pieces, you need to drill holes along the edges. As you can see in the picture, you need planks on wooden block to prevent surface damage. Drill three holes in the bottom and two holes in the sides.

Smart Tip: If you are not experienced in woodworking, you should draw guidelines for pilot lines. Make a margin from the edges to prevent the wood from splitting.

If the edges of the bottom are not smooth, you should sand them thoroughly with 120-grit sandpaper before assembly.

Coat the bottom ends with wood glue to strengthen the connection. Remove excess glue with a dry cloth, otherwise you will waste time cleaning it.

Press the ingredients firmly and leave for half an hour. If you are using good glue, it will hold the joints together well.

However, still tighten the cuts themselves drilled holes.

In order to receive robust construction We recommend using self-cutting tools. Work carefully to prevent damage to wood components.

Smart Tip: Align all parts before twisting. As you can see in the picture, the edges should be smooth.

After installing all the components together, the toolbox should look similar to the one in the image.

Make a handle from a cylindrical wooden rod. The diameter of the handle is approximately 20 -25 mm.

Smart Tip: Use a ruler to cut the rod required length.

Add a little wood glue to both ends of the rod before placing it in place. Then, drill a hole and tighten the cut itself. Hold the handle while screwing, otherwise it may move out of place.

Smart Tip: Leave about 15mm from the top edge to the wooden handle.

Remember to smooth the edges of the wooden components with sandpaper.

Smart Tip: Clean the box of dust and shavings before painting.

Then completely sand the entire surface of the box with sandpaper.

Smart Tip: Apply several coats of paint, varnish or stain to improve the appearance of the wood and protect the materials from rotting.

Thanks for reading our article on how to make a wooden tool box. What kind of toolbox do you have? Tell us in the comments below.

A wooden box is a simple but very functional item. Depending on the shape and depth, such products can be used to receive correspondence, grow seedlings at home, or store children's toys or tools.

The design is quite simple, so wooden flower boxes can be made with your own hands. If you use your imagination and apply a little skill, even such an elementary thing can be turned into a real work of art.

Regular wooden box

In fact, this is an ordinary design rectangular shape, which is suitable for growing flowers in the country or storing various household items at home.

The advantages of making boxes from wood are due to the fact that it is environmentally friendly and available material, convenient for processing with hand tools.

To assemble such a product you will need:

• boards that will go to the bottom and walls;
• fastening elements: screws, nails, metal corners;
• tools: screwdriver, hammer, wood saw;
• roulette;
• a simple pencil and paper to prepare a drawing.

First, a drawing is made. A sketch of the finished product is drawn on paper and the main dimensions are determined. The schematic image allows you to accurately calculate the material needed to make the box.

Any boards left over after construction or renovation are suitable as raw materials. The main thing is that the material is of high quality: there should be no signs of rotting or wormholes, otherwise the service life of the box will be short.

The boards are cut according to the specified dimensions. There should be 5 elements in total: side and front walls, bottom. The boards are nailed together; corners can be placed at the joints to provide additional rigidity to the structure. If the box is intended to be used for growing flowers indoors, it makes sense to lay a layer of waterproofing made of plastic film on the bottom.

Plywood structures

Here the material is selected depending on the intended use of the finished product. If the box is intended for correspondence, you can get by with thin plywood. For seedlings or flowers, multilayer sheets impregnated with a waterproof compound are more suitable.

The design is made according to the following scheme:

• make a drawing of the box with dimensions;
• the drawing is transferred to a sheet of plywood;
• parts are cut out according to the markings;
• individual elements are fastened together with self-tapping screws or nails, and the joints are treated with sealant.

Considering that plywood is easy to process, you can make more complex, non-standard country boxes. For example, the joints of the walls should be designed according to the tongue-and-groove principle. If you are making a deep box for storing children's toys, you can attach wheels from an old one to the bottom. computer chair. Drawers with a sliding top panel look interesting. Here a cover is cut out of a sheet of thin plywood and a groove is cut in the upper part of the walls.

Flower box for balcony

The general principle of making a flower box from wood with your own hands remains unchanged, but the specifics of use force you to take into account a number of nuances.

Depth is of particular importance. Experienced gardeners It is not recommended to make walls more than 20 centimeters high. Flowers need to be watered regularly, and wet soil significantly increases the weight of the structure.

Balcony boxes need to be placed on a solid base to prevent them from falling down. For these purposes they are usually used metal frames, welded from reinforcement bars. The advantage of this method of fastening is that the outdoor box can be easily removed and brought into the house for the winter.

Note! If painting is planned, it is better to give preference to natural and neutral tones. Bright colors not only quickly fade in the sun, but also hide the natural beauty of plants.

To save on decorative design, it is recommended to plant flowers in two rows. In the foreground will be climbing plants, which will disguise the wooden container. The flowers of the main composition are planted in the background.

For seedlings

The size and shape of wooden planting boxes will depend on how you grow your flowers. Bulky items take up a lot of space and spoil the overall interior of the apartment. Therefore, if you plan to grow cucumbers and tomatoes on a windowsill, it is better to limit yourself to small wooden plywood boxes.

The garden plot offers more possibilities For home handyman. So, a large and functional box for seedlings can be made from an old pallet. In fact, a pallet initially represents a finished product. The gardener can only make the bottom and walls from pieces of multi-layer plywood. To do this you will need decorative nails and a hammer. After that inner space filled with soil, the seeds are sown between the top rows of boards.

Application of pallets

From several pallets you can make a deep wooden box with an opening lid for growing garden crops in a greenhouse. To do this, the pallets are carefully disassembled into their component parts, nails are removed, and damaged boards are discarded.

The boards are cut to size based on the future shape of the box: rectangle or square. For the racks, 4 square bars are cut, their length depends on the height of the box.

Boards that will go to side walls, laid in a row and a straight line drawn at a distance of 15-20 mm from each edge. In accordance with the markings, apply a block and tighten the screws. The result should be two longitudinal walls. In order to subsequently equip the box with an inclined lid, the top board of one of the sides must be shortened by 3-5 cm.

The finished panels are installed in parallel, and the end boards are attached to the support bars. After this, the bottom is made from plywood. If the seedlings are grown outside, the lower element of the structure can be neglected.

The lid is made of a slatted frame corresponding to the size of the box. The elements are fastened together with flat metal corners. If the box has a large area, it is better to strengthen the lid with two longitudinal slats. Using a stapler, nail to the surface of the lid plastic film. 2-3 loops are attached to the back of the wall.

At the final stage everything wooden elements treated with a special disinfectant composition to prevent rotting and the appearance of bark beetle larvae. For ease of use, the sides of the lid can be supplemented window latches which will hold it in a half-open position. Now all that remains is to fill the box with soil and plant the seeds.

Decorative design

Beautifully designed decorative wooden boxes can even decorate city ​​apartment. Any wood initially has an original texture that just needs to be emphasized. It is noteworthy that you do not have to incur financial costs for this. Ordinary varnish can highlight natural beauty natural material. Before applying, you can burn patterns or an interesting design onto the surface.

To age the wood, the boards need to be lightly burned with a torch, then the surface must be sanded and varnished. Such products look colorful and are an original addition. interior design or a worthy decoration for a personal plot.

A box for storing various small items and products is considered an indispensable attribute in a modern household. Thanks to this design, everything is in its place without creating clutter. For example, vegetables and fruits should be stored in a ventilated structure where fresh air can easily enter.

Monolithic products without any holes are suitable for tools. Designs with additional doors and a folding mechanism are suitable for various small items.

We offer original options DIY storage boxes. Here you will find out what materials and tools you will need to make these products.

What materials are used to build structures?

Most often, boxes are made of wood and other materials. For instruments, it is better to choose solid pine or maple. Alder or aspen is suitable for products. These tree species are distinguished by their durability and strength. They do not emit resinous secretions and do not dry out over time.

Plywood is suitable for making decorative items. You can place all sorts of little things here. To fix the parts, a special adhesive composition is used.

Master class on creating a box with your own hands

We offer step by step instructions how to make a box at home. To do this you will need the following tools and materials:

• tape measure;
• a simple pencil;
• board 25 mm thick;
• wooden edges 15 mm thick;
• thin plywood;
• metal corners;
• nails and screws;
• hacksaw;
• screwdriver;
• metal hinges for opening the lid structure;
• hammer.

First of all, you need to familiarize yourself with the diagrams and drawings of how to make a box. This will allow you to correctly compare the dimensions of the finished product. You should not make too large structures, as they will take up a lot of free space.

When all the components are ready, you can proceed to making a storage system for vegetables and fruits. The process includes several stages:

On the surface of the boards we mark the size of the side parts of the product. Next we move on to the bottom of the box. We mark the size on the wooden edges. After this, using a hacksaw, we begin to cut out the blanks.

We fix the boards together using small nails. We attach the bottom parts using the same method.

The product cover consists of plywood sheet. It is installed on special hinges that allow you to control the closing process.

The photo of the DIY box shows the entire work process.

Tool storage box

This type of design is considered best idea DIY box. This product will allow you to keep all your working tools in one place. Here you can make additional sections for storing screws, nails and nuts.

To do this you need to prepare:

• thin board;
• thick plywood;
• hacksaw;
• electric jigsaw;
• hammer;
• screwdriver;
• tape measure;
• drawing of the finished product;
• metal corners.

On sheets of thick plywood we make markings for the drawer parts. After this, we drill holes for fastening the metal hinges. Next, we connect the side parts to each other.

Let's start making the bottom for the storage system. To do this, we attach a thin board to the sides of the box. To prevent it from collapsing under the weight of tools, it must be strengthened with thin boards. To do this, several wooden elements are stuffed on the bottom surface.

On the side parts of the plywood we draw markings for the handles. They will be cut inside the main body of the product. Here you will need an electric jigsaw. The cutting base is installed at the beginning of the marking.

In the process of cutting out parts, you should not make sudden movements. They can cause cracks to appear on the surface of the product.

Now let's start installing the partitions. To do this, cut out a small square from thin plywood. It is fixed with metal corners in the middle of the structure.

The diagram shows a detailed view of the tool box. The drawing shows the exact number of parts:

• side parts – 4 pcs.;
• bottom – 1 pc.;
• septal wall;
• handles – 2 pcs.

DIY photo of boxes

A box is a necessary thing in everyday life. There is no point in buying or ordering it, because it is much easier to make something with your own hands from boards. The main thing is to follow the technology step by step, choose the right boards and know how to make a box. Then everything will work out.

Choosing a board and making parts

The size of the boards largely depends on the size of the intended product. There is a common belief that low-quality boards are suitable for a box. Is it so? If the surface of the wood is uneven, with knots and deformations, then a person may be injured when sawing or processing the board. In order to create such a structure, there is no point in taking high-quality expensive wood. It is best to choose a board that is medium in size and quality. How to make the simplest box where you can put your tools?

To make such a design you will need:

• boards;
• self-tapping screws;
• sanding paper;
• carpenter's pencil;
• ruler or triangle;
• jigsaw or a circular saw.

22 mm wide boards are best suited for this. For fastening, you will need self-tapping screws, and to polish the boards and the surface of the finished product - sanding paper. It all starts with markings, which require a carpenter's pencil and an ordinary ruler. It is best to take a triangle ruler, because with its help it is more convenient to mark the boards from which the box will be made.

Practically not used for cutting wood hand tools. To make the box, you will need a circular saw or jigsaw. Be sure to pay attention to the teeth of the power saw. They should be small and even. Such structures for domestic needs are not made of thick wood. A powerful saw, which is usually used for cutting down trees and landscaping work, is not needed here. There is one more nuance: when starting to saw off boards, they first make a test cut on the wood to see how it will be sawed, and only then begin the main operations. In order not to make a mistake with the sizes finished design, for this purpose, it is best to prepare a “pattern” in advance: make its bottom and walls from paper. This is very convenient, because then you just need to attach the “pattern” to the wood and transfer the necessary parameters to the boards.

Once all the wooden parts are cut out, they are sanded. Then 3 holes are drilled at the bottom of the side walls of the finished product. The lower ends are coated with wood glue. To remove excess it, you will need a dry cloth. The components of the box are assembled and pressed tightly together. Screws are screwed into the drilled holes. Before finally screwing in the screws, it is necessary to check the correct location of all parts of the finished product. To make the tool box convenient to use, a handle made of a cylindrical rod is attached to the top of it. The rod can be made of wood or metal. How to make similar designs for flowers? Repeat the same operations from the beginning. And use self-tapping screws to secure the handles on the sides to make the flower box more convenient to use.

Manufacturing of a retractable structure

It is believed that a retractable structure is more difficult to manufacture than an ordinary one. This is true. Calculations and measurements when making such boxes require more complex ones. Before you start making a retractable structure, you need to decide where it will be located. If necessary drawers for a cabinet, it is better to first make one for any other piece of furniture in order to understand the principle of operation and master the manufacturing technology in practice. To begin with, it makes sense to try to restore old cabinet, making drawers for it. First, the doors are removed from it and unscrewed door hinges. The first thing to measure is the “working depth”. This term means inner surface sidewalls, that is, the distance over which the boxes move. Each of them has an external part, which is usually called a facade. The bedside table also has a facade. Based on this, all drawer fronts are calculated. The height of the cabinet facade is divided by their number. From the resulting figure, subtract the distance of the gaps multiplied by their number.

The selection and calculation of guides is the most critical stage of the work. For retractable design It is best to select full rollout guides. When you already have experience in manufacturing retractable bedside tables, it makes sense to switch to roller guides, the installation of which is much more complicated. There is no point in skimping on drawer slides. The better quality they are, the more functional and reliable the piece of furniture will be. Marking the guides is not as difficult as it seems at first glance, the main thing is to show maximum care. The calculation of guides starts from the top. The upper pair of guides will not differ on the right and left sides. The marking is carried out at a height equal to half the height of the upper facade. All the following markings are made in accordance with the dimensions of the drawer and the front of the bedside table. Once the markings are completed, they proceed to the manufacture and assembly of the products themselves.

Securing the guide elements

Drawers are best made from solid wood or fiberboard. Each drawer requires a furniture handle. Assembling boxes from fiberboard is almost no different from assembling wooden ones, but it has its own nuances. Before installing the boxes, their edges are glued. This operation at home does not require complex equipment. Using an iron and a dry cloth, apply the edge to the desired end and gently heat it with the iron. To trim off excess edges, you will need an ordinary kitchen knife. It should not be sharp so that the laminate that makes up the edge is not damaged. If the box is made of solid wood, this operation is not necessary.

When the drawers are assembled, it is necessary to properly strengthen the guide elements. The full rollout guides must be divided into 2 parts. The wide part is attached to the side of the cabinet, the narrow part to the side of the drawer itself. The guides are fixed with a slight indentation from the side of the cabinet (about 3 mm) and then proceed to attaching the drawer fronts. First of all, holes are drilled in them for further fastening of the handles. Through the same holes the facade is attached to the main part of the box.

The rough fastening is done first; once it is completed, you need to check the functioning of the box and only then fix everything completely.

Exist different kinds fasteners, however, as experts say, it is best to use confirmed fasteners for drawers. If the drawers are small, the number of corners in them is counted and the number of required confirmations is obtained. Drawers also need a pattern. The most difficult stage in their manufacture is the bottom. Since the drawer is retractable, unlike an ordinary one, it is mounted in 2 stages. First, they do everything rough, check that the drawer is installed correctly in the bedside table, and only then attach everything completely.

If the box is made of solid wood, after finishing assembly it is better to immediately open it with varnish. When you need drawers for laundry intended for washing, and there are no large sheets of wood for them, then you can make them from thin strips. They are suitable for making frames, bottoms and fronts of drawers.

And for the manufacture of sidewalls you can use plastic mesh, which will provide additional ventilation to things. In some cases, metal mesh is also used to make such boxes.

If you need one large non-pull-out linen drawer, it is made using the same technology as for tools, only the dimensions are adjusted.

When the phrase “wooden box” is mentioned, many people immediately imagine a standard fruit box. Although in fact boxes can be very different and used for all sorts of purposes. This is a very useful product that can be used in everyday life, not only somewhere in the country, but also just in the house. Let's figure out how to make a wooden box with your own hands, because only a homemade thing can be not only unique and as convenient as possible, but also completely safe.

general information

A box is a type of container or an interior item, which is a product that has a cubic or parallelepiped shape. It can be made from various materials, including plastic, cardboard, metal, but is mainly made according to tradition from wood or its derivatives. Depending on the design, the box can have solid walls and bottom or slatted surfaces, and it can also have a lid and be either simple or decorative.

On a note! The category of drawers also includes drawers that complement furniture and make it more functional and convenient to use. Such boxes usually do not have a top lid, but their bottom is equipped with special wheels that ride on small rails fixed inside the cabinet or cabinet in the place where the box itself should be located. This makes it easier to use.

The history of the box itself is unknown. From time immemorial, people have used various containers for storing all kinds of household items, transporting and packaging goods, etc. Historians believe that, most likely, the first boxes appeared during the period when trade relations began to develop and were invented precisely with the aim of simplifying the transportation of goods and products , maintaining it in proper quality until it reaches points of sale.

Nowadays, a wooden box is still used for transporting and storing goods, but at the same time it is also used in everyday life, and even in gardening. It is actively used for harvesting and growing seedlings. By the way, at one time standards even appeared for boxes for potatoes, storage of apples, etc.

At the same time, the boxes settled firmly in the house. They can be used not only as furniture elements, but also as individual products. For example, there are boxes for storing tools, small parts, sewing accessories, etc.

Serious competitors to a regular wooden box are products and containers made of veneer, plastic, and cardboard. But none of them can fully replace simple, but reliable and high-quality boxes, and therefore they continue to be actively produced and made with their own hands.

Properties of a wooden box

Why, despite the emergence of cheaper and simpler competitors, regular box made of wood does not lose its popularity? It's simple - the answer to this question lies in the unique properties and features of such containers.

Table. Comparison of box characteristics.

On a note! Ordinary wooden boxes of simple design are actively used when decorating loft-style rooms. They are an excellent attribute of this design solution.

The production of wooden boxes in production takes place according to GOST 20767-75. And for them, a wooden board of a certain quality, 1 cm thick, is used. Such boxes are thin-walled, but durable. They are quite light and easy to use.

Prices for construction boards

Construction boards

Boxes in the house

As a rule, boxes for transporting and storing products are not well processed - they are hardly sanded and, of course, are not varnished. But for use at home, it is recommended to treat them and cover them not only with protective compounds, but also with paints and varnishes. Then the box will look beautiful, and the person using it will not risk getting a splinter in his finger.

Typically, the house rarely uses boxes made directly for transporting cargo or storing the same fruit. More often than not, those who need a simple but nice box have to contact carpentry workshops and order a specific product from them according to their size and wishes. So don’t confuse industrial and carpentry boxes.

Boxes in the house, as already mentioned, can be used for various purposes. This includes storing utensils in the kitchen, storing small items in the living room, storing toys, clothes, shoes, cosmetics, household chemicals, etc. The main thing is that this type of container fits organically into the interior and does not cause confusion.

The easiest way, of course, is to get hold of boxes in a store or warehouse, sand them and varnish them to use at home. But you can make such a container yourself, since this is not a difficult task at all, be it a box for decorating a room, storing things, or growing seedlings.

Prices for different types of wooden boxes

Wooden box

Why exactly a tree?

Wood is the very material that is most often used to create products for the home. The reasons why this happens are simple. First of all, it is important to say that wood is an environmentally friendly material that does not pose a danger to human health. He doesn't exude unpleasant odor and does not release any toxic substances into the air, so you don’t have to worry about allergies or health problems.

Wood is also one of those materials that you can easily work with at home. You don’t have to use complex specialized equipment; it’s enough to have a sawing tool, drill and screwdriver or screwdriver on hand. Also, grinding and other processing of the material may require a minimum of cost and effort.

The wood is durable and beautiful and, varnished, is able to maintain its appearance for a long time. for long years. Only uncoated material can darken over time and lose its former natural beauty. Fresh wood looks very nice.

It is not surprising that wood has been and remains one of the most popular types of materials. Although now in almost any specialized store you can buy its derivatives - plywood, panels, furniture board etc. But none of these options will be better than regular natural fresh board in any case.

Prices for furniture panels

Furniture board

Making boxes: what do you need?

So, to make absolutely any wooden box (regardless of the purpose of its use), you will need a number of tools and materials. The list is small, but without these things the matter will not move forward. You will need:

• sawing tool for cutting wooden board and bars onto planks of the required length. This could be a jigsaw or a wood saw;
• grinding device wooden surfaces – Sander, sandpaper with a special bar, etc.;
• hammer (in case nails will be used);
• screws, nails, possibly metal corners;
• screwdriver (if self-tapping screws will be used as fasteners);
• varnish and brush or paint - to cover the surface of the wood or give it a certain color;

On a note! Before applying paint, it is best to pre-prime the wood. This will reduce the amount of paint used and also provide it with a more saturated color.

• pencil, square, ruler, tape measure - tools that will help make the necessary markings.

Important! Before you start creating a box, you must draw its diagram or download a ready-made one from the Internet. This will allow you to make a smooth and neat product that has the necessary parameters.

Prices for popular models of screwdrivers

Screwdrivers

Making a plant box

Step 1. The first step is to decide on the dimensions of the box being constructed. It is important to choose the place where it will stand. Based on this, you should sketch out a drawing of the box indicating the dimensional parameters and calculate how much material is required.

Step 3. Now you need to apply the appropriate markings to the board - mark the sides and ends of the box on it. It is better to take measurements with a tape measure, but to get even marks it is better to use a square.

Step 5. The boards on the sides of the box need to be connected together using self-tapping screws. You can also use nails, but connections with self-tapping screws are much stronger and of better quality.

Step 7 At the bottom of the plant box, it is important to drill a few drainage holes. They will ensure outflow excess water, which will fall into the ground during watering or rain.

Step 8 It is important to sand all surfaces of the box so that they are smooth, pleasant to the touch and safe.

Step 9 Finally, the box can be painted, but it is better to coat it with varnish. This will make the box beautiful and additionally protect it from moisture.

Video - Making a simple box

Slat box

Step 1. The first step is to cut the blanks to create the box. You will need bars of the selected length, slats 1 cm thick. The bars need to be cut to length so that their profile is triangular.

Step 2. Next, you need to take the bars, lay them on top of each other (2 bars on each side) and start making walls. On flat surface To create a block, you need to apply glue to the wood and arrange the slats so that they rest on the flat side surface of the bars. The slats are placed at a certain distance from each other to create gaps.

Advice! If you plan to make several boxes of the same size, then it is convenient to use a wooden template to create the walls.

Step 3. Then the slats additionally need to be secured to the corner bars using nails or self-tapping screws. In this way, two side walls of the box are made.

Step 4. Next, the prepared walls need to be placed in a special template (or simply held correctly) and, using the same principle as in steps 2 and 3, attach the next slats to the sides of the free sides of the bars. Thus, it will be possible to create two other side walls.

Step 5. Then the bottom is made. You need to lay two slats (with a length equal to the length of the box) parallel to each other, and fix other slats on them, but without gaps, so that the bottom is solid.

Step 6. All that remains is to secure the bottom to the underside of the box, and it is ready. If necessary, all structural parts can be sanded before assembling the box. It is better to varnish or paint the product after assembly.

Video – Box on spikes

Video - Making a tool box

The box was and remains a simple but indispensable item for storing all kinds of things. It is especially necessary at the dacha or in a private house, as well as for those people who love everything simple and uncomplicated. In any case, a product made by yourself will be as reliable as possible and will last for more than one year, or even more than one decade. Moreover, as it turned out, making a wooden box is simple - it is only important to understand what shape you want to get the product.