Filter for the electrolux air handling unit. Forced-air and exhaust ventilating installations of Electrolux. Water connection

Everyone knows the high quality of Electrolux appliances. Feedback from happy owners household appliances This brand is on almost any thematic forum.

Air handling units Electrolux (Electrolux) did not become an exception to the rule and took a worthy place among quality products this brand.

Supply and exhaust Electrolux ventilation is on guard Have a good mood, well-being and performance, removing exhaust air from the room, providing fresh air into it and thus regulating air exchange.

Recuperators Electrolux (Electrolux)

Filling the room fresh air- far from everything that Electrolux ventilation is capable of. Now your money does not fly in vain in ventilation pipe and it's all thanks to recuperators Electrolux.

Recuperation is a broad concept, but in relation to ventilation installations, it is the process of transferring part of the heat from the removed air to the injected air. The exhaust air is retained in a special heat exchanger, or recuperator, where it heats the cold incoming air in winter or cools it in summer.

It's no secret that heating elements spend a large number of electricity. Even if there is enough money - why waste it in vain! Compared to ventilation without heat recovery, Electrolux devices save up to 90% of the energy used to heat the incoming air. Decent savings in electricity and determines the low cost of operating Electrolux recuperators.

Why an Electrolux air handling unit?

The Electrolux air handling unit is a high-class equipment, the advantages of which include the following:

• excellent workmanship;
• several protection functions;
• effective filter;
• simple functional control panel;
• the ability to set the operating mode for the week ahead;
• preparation for connecting additional fans;
• famous brand from high level trust.

In general, everything for the user: turn it on and enjoy.

Buy supply and exhaust ventilation unit Electrolux in the online store

Buy supply and exhaust ventilation unit Electrolux in the corporate online store "Mr. Climate", which is the official dealer of the brand. Delivery is carried out by our own courier service within 1-2 days from the date of order in Moscow and St. Petersburg, as well as transport companies to the regions of Russia! Detailed information on the terms of delivery to the regions can be found in the "Delivery" section or you can clarify all questions with a technical consultant by phone.

Air handling units Electrolux you can pay in a convenient way for you (cash and non-cash forms, payment by card and bank payment), and in addition to the delivery service, you can pick up the goods at the pickup point closest to you. After receiving the goods, you will receive a warranty card, instruction manual, sales receipt and cash receipt.

Electrolux air handling units with hexagonal plate heat exchanger created in Sweden. The hexagonal shape of the heat exchanger made it possible to increase the efficiency of the system, relative to competitors' models. For installations of this type there will be work on the injection of fresh / purified air both in administrative-type premises and in industrial, residential, public purpose. This brand has in its range of models ceiling option installation, or vertical wall. The buyer will be able to select the model that is optimally suitable for a specific type of room.

We note the positive points in the characteristics of these models:

• has a thermal energy recovery system, ventilation system allows you to approach the maximum reduction of costs going to pay heating bills.
• Purification of the supply air currents prevents large/medium dust elements from entering the rooms to be refreshed in the standard equipment.

The cases of the models of the described devices are covered inside and outside with an insulating noise-absorbing layer (absence of vibration, quiet operation). The internal parts of the structural elements are made of dense expanded polystyrene.

The RoomKlimat online store offers a wide selection of ventilation and air conditioning equipment wholesale and retail at the most affordable prices in Moscow. Our company offers to buy Electrolux air handling units of the STAR series with a heat exchanger (with automation), which differ high efficiency. Equipment can be ordered on our website with delivery to any region of Russia.

Basic Description

The supply and exhaust units presented in our catalog are designed for supplying, as well as cleaning and removing exhaust air to rooms with a small area. This equipment allows you to heat and humidify the air without additional energy consumption due to the plate-type membrane type heat exchanger. Installation of air handling units is allowed both in the manned room and behind the false ceiling.

Standard equipment includes supply and exhaust fans, filters, plate heat exchanger, automatic control system with remote control remote control(PDU).

The fans are equipped with high efficiency impellers with backward curved blades, asynchronous electric motors, built-in thermal protection by means of thermal contacts with automatic restart. Sealed ball bearings ensure a long service life of the air handling unit exhaust unit of this type.

The device and principle of operation of the supply and exhaust units ElectroluxEPVS-1100

Supply and exhaust compact ventilation units ElectroluxEPVS-1100 used in small ventilation systems (from 200 to 2000 m3/h). They are often placed in private houses, apartments, small offices, shops, etc.

Components and completeness of the installation:

• Fans (supply, exhaust)
• Heat exchanger-recuperator
• Filtration system (coarse filter)
• Automation system
• Additional electric heater
• Remote Control
• Instructions, warranty cards, etc.

Electrolux EPVS-1100 compact air handling units are the easiest to install, as they are supplied assembled in a one-piece housing. All components are already installed inside the machine.

circuit diagram installations

Rice. 1 - Schematic diagram of the main components of the installation

PV— supply air fan;
IV— exhaust air fan;
PR- plate heat exchanger;
PF— filter for outside air;
IF— filter for exhaust air;
TJ— supply air temperature sensor; TL - outdoor air temperature sensor.

Dimensions and service space

To install the unit, it is only necessary to hang it from the ceiling or on the wall, connect it to the air duct system and connect the power supply.

Standard Mounting Diagram

Rice. 2 - Mounting diagram

One of the most important parameters of this series of air handling units with heat recovery is its high energy efficiency due to the transfer of heat energy from the removed warm air supply cold.

The efficiency of modern membrane heat exchangers used in these units reaches 70%.

The use of Electrolux EPVS-1100 air handling units with heat recovery is especially important for our climate, when winter period year lasts 7-8 months a year.

According to the experience of our research and calculations, the payback period for air handling units with recuperation, on average, is 1.5-2 years of operation. When compared with equipment that heats supply air electricity.

High recovery efficiency is achieved by modern technology use of a membrane-type heat exchanger-recuperator with the possibility of transferring part of the heat with moisture through the surface of the recuperator.

However, recuperation alone is not enough for full heating, so it is necessary to install an auxiliary heater, although its power is already much less than what would be needed to heat the same volume of air without using recuperation.

Control

The management of this model of equipment is absolutely simple. Switching on / off and regulation of the necessary parameters is carried out using the control panel:

Fig.3 - Appearance control panel

Advantages and disadvantages of this model of air handling unit

Recommendations for the selection of the air handling unit:

It should be noted that this way selection is very indicative and suitable for designing complex ventilation systems.

Aerodynamic characteristic of the installationElectroluxEPVS-1100

In case it is necessary to use a longer network of air ducts and there will be high losses, the manufacturer recommends using special support fans:

Fig.5 - Suspension fanElectroluxEPVS/EF-1100

They allow you to increase the performance of the installation at high pressure losses.

The characteristic shows how the performance changes with the use of retaining fans and without their use.

More detailed information about Electrolux EPVS-1100 units is presented by the manufacturer in the installation and operating instructions.

Maintenance and care:

For standard operating conditions (no serious air pollution environment and normal indoor climate) it is recommended to clean or replace the filters at least once every 12 months. It is advisable to carry out these procedures 1 time in 3-4 months.

Our experts will be happy to advise you and select the installation required power. Prices for Electrolux STAR PES depend on their technical characteristics.

ROVEN company offers to buy electrolux air handling units star series epvs with heat and moisture recovery in Moscow favorable price. We invite you to visit our office at: Moscow, st. Yuzhnoportovaya, 7 building 7 of. 403. Call the phone +7 495 646 23 90 , our experts will answer all your questions.

The STAR air handling unit is a compact recuperative device designed to supply, purify and remove exhaust air in small spaces. Heating and humidification of air is carried out without additional expenses of the electric power. This happens due to a plate-type membrane-type heat exchanger, which, extracting heat and moisture from the utilized air, transfers them to the incoming air from the street. Installation of the unit can be carried out directly in the served room and suspended ceiling.

Design

Standard units are equipped with supply and exhaust fans, supply and exhaust filters, a plate heat exchanger and an automatic control system with a remote control. The innovative type of heat exchanger allows to heat and humidify the supply air, while the special membrane of the heat exchanger transfers only water molecules from the exhaust air, leaving all impurities in it.
The fans of the units are equipped with high efficiency impellers with forward curved blades and asynchronous motors. Sealed ball bearings in motors are maintenance-free and provide extended service life. Fan motors are protected by built-in thermal contacts with automatic restart at 125°C.
The unit has two fan speeds, the ability to control an external electric heater (supplied separately) and electronic heat exchanger frost protection.
If there is an extended network of air ducts, additional fans of the back-up air (supplied separately) are installed sequentially in the supply and (or) exhaust air ducts.
The unit is designed for mounting directly to round air ducts.

Distinctive features

• Built-in automation system
• Self-diagnosis of errors
• Programmable remote control with LCD display included
• Programming function for weekly plant operation schedule
• Heat exchanger efficiency up to 85-90% at maximum air flow
• Filtration degree EU5
• Control of filter contamination by operating time with a variable parameter
• Uninterrupted operation without freezing at temperatures up to -15C
• Two modes of operation at temperatures below -15C:
• automatic defrosting mode of the heat exchanger
• antifreeze mode with connection of an external electric heater

Installation

The air handling unit is delivered ready for connection. The unit is mounted horizontally in the subceiling space. During installation, it is necessary to provide access for after-sales service installations.

Not allowed:

Use for transporting air containing "heavy" dust, flour, etc.
to mount in explosive, fire hazardous rooms and for transporting air containing vapors of flammable substances.

Care

Clean the filter regularly depending on how dirty it is, especially in May-June, at the time of flowering. During this period, it may be necessary to clean the filter 2 or more times a month.
Do not use solvents to clean the filters and the heat exchanger. metal brushes. Use a soft brush to remove dust.
Reliability check electrical connections produced at least once a year.