Encyclopedia fireproof

Multi split air conditioning systems for 3 rooms. Multi split system with three inner blocks. TOSHIBA air conditioning save electricity

Multi Split Systems for Three Rooms acquired wide popularity as among owners large apartmentsand private cottages. The advantage of choosing such a split system is in the rational use of space and economy of electricity. When installing the multi split system, only one outdoor unit is installed to which all internal blocks are connected. In this case, any variability of the configuration is allowed - the buyer can choose internal blocks of different power and even type (depending on the area and constructive features premises). Thus, wall, ceiling, outdoor ceiling and other internal blocks can be connected to the outer block.

The choice of an outdoor unit is determined by the required total power of all internal blocks. Functionally internal blocks of multi split-systems are no different from standard air conditioners, with the exception of more convenient management and energy efficiency. Energy consumption of equipment depends on the class of energy efficiency. The most economical and reliable models are split systems with an inverter type of compressor.

Multi Split System for 3 Rooms possesses such advantages as:

  • stylish, modern design;
  • ample opportunities to select configuration and external view internal blocks;
  • deep efficient air purification using best filters, including photocatalytic, plasma and anti-allergenic HEPA filters. Cleaning depth reaches 99.9%;
  • convenient control from one console, including the ability to install an individual mode of operation for each internal unit;
  • optimal electricity consumption;
  • multifunctionality (heating, heating, ventilation, drainage, air ionization);
  • the minimum level of noise that allows you to equip the room of any purpose, incl. Bedrooms, children's, work offices, etc.;
  • wide selection of models.

In our online store you can buy multi-plates of the system on 3 rooms of the world's leading manufacturers, including such well-known brands like Daikin, Mitsubishi Electric, Dantex, Panasonic, LG and others. Models are presented in a wide price range, so you can choose a split system with regard to your budget, stated requirements, design features and area of \u200b\u200bpremises.

This is a device having an outer block and three internal, which are placed in the necessary rooms. Such a complex of technology is great for those cases when it is necessary to ensure air conditioning several adjacent roomsBut at the same time not to harm the construction itself and the interior of the construction.

Air conditioning for 3 rooms from online store Site

The scheme of operation of such systems is as follows: Three internal blocks are placed in the respective wishes of the owner of the rooms, while connecting them only with one block - external, which is placed on outside Wall buildings. Internal blocks placed in this way can save the autonomy of the specified settings and operating modes, being not dependent on other blocks.

Control over the work and management of each of the three aggregates can also be carried out individually, using separate remote controls. This gives such a system simplicity and comfort in operation.

Relevance of application

Multi-split systems are usually used to avoid multiple bulky structures on the facade of the building. Options for situations in which the installation of such a complex of equipment will be relevant, there are several:

  • the facade of the construction can not allow the placement of additional structures;
  • installation of external blocks is limited by the partnership of residential owners or other services;
  • the owner of the housing does not want to clutter the facade of the house with many blocks.

Advantages of multi-split-system for 3 rooms kits

Technical specifications And the convenience of the design of these systems has proven itself in the goods market as in demand and reliable. And all because they provide:

  • the integrity of the facade of the house;
  • the organic of the interior of the premises;
  • electricity savings;
  • the possibility of simultaneous or partial operation of the internal blocks;
  • convenient way to control each system block.

When choosing a multi-split system, you need to take into account that it is necessary to organize the operation of the internal blocks in such a way that they work simultaneously either on cooling or heat. Thus, they will help you provide a single microclimate in different rooms and avoid temperature drops.

note

The cost of the multi-split system on 3 rooms in comparison with individual monosime is usually a higher amount. This is related to the complexity and complexity of the installation process of this equipment and communication system.

When choosing such a system, you do not need to save on the means for one simple reason: at the end warranty period outdoor unit, the cost of its dismantling and re-installation It will cost you a fairly round sum - not much not enough, half the value of the entire set of climate techniques.

Buy multi-split-system for 3 rooms can be in the online store site

The symbol of reliability, high quality and comfort of the buyer has traditionally become the products of Japanese manufacturers. Among such companies are most popular:









The choice of multi-split depends on your personal wishes and the nature of the design of the room. If you need a powerful but economical inverter conditioner, Stop your choice on the Daikin 3MX line: Models

Make purchases with Sitiklimat

We offer you a wide range of products from well-known world manufacturers favorable pricesAnd also manufacture equipment.

Multi-Split Systems for 3 rooms You can choose by reading the product catalog on our website or by calling the specified phone numbers.

The optimal temperature in the room allows us to ensure split systems with the "rendered" exterior unit. To create comfortable conditions in all rooms of the apartment, multi split systems for 3 rooms are suitable.

Device

Split system - sophisticated view Air conditioner, which includes two blocks: external (compressor condensate unit) and internal (evaporative). Outdoor block Mounted outside the building on the wall. Internal block (air conditioning) is mounted indoors.

Compressor-condensate unit (CKB) is an element of climatic equipment that performs the function of the refrigerant movement on a closed cycle.

CKB consists of several parts:

  • compressor - compresses the working substance;
  • condenser (heat exchanger) - cools;
  • choke (extension coil) - expands.

CKB includes additional working items: engine for compressor, capillary tubes, fan. Drying filter choke and solenoid valve Combined into the strapping of the KKB.

The evaporative unit is part of the climatic equipment that performs the function of transferring refrigerant from liquid into a gaseous state with heat absorption. The evaporator consists of:

  • cooling coil;
  • long fan;
  • air filters.

The internal unit can be equipped with additional functionality: remote control, Air purification filters, timer, smooth control modes of temperature modes.

The external block is connected to the internal thermal insulation and drainage highway.

Power is supplied through special electrical connections.

The refrigerant is a working substance (coolant), which under the action of pressure goes into various states and changes the ambient temperature. When moving from a liquid state to another, as a result of compression and an increase in pressure, an energy absorption occurs. Return to liquid stateWhen expanding and reduced pressure, it leads to the release of energy internship.

Types of split systems:

  • Wall;
  • Outdoor ceiling;
  • Channel;
  • Column type;
  • Cassette type;
  • Central air conditioners;
  • Roof.

CKB is a container with a working substance. The refrigerant, circulating over copper tubes, cools the air, which is fed to the inner block from the street. There is a decrease in the room temperature.

Modern split systems provide for operation in two modes: cooling and heating.

Switching the mode to an increase in the room in the room leads to the reversal of the refrigerant use - it begins to evaporate in the external block, and condenses in the internal.

Work split system:

  1. The compressor compresses the working substance in the gaseous state.
  2. A compressed refrigerant enters the condenser, where heat isolate during the transition to a liquid state.
  3. Losing a part of the heat, the working substance falls into the highway. The refrigerant retains increased pressure.
  4. The working substance falls into the choke and dramatically expands, which leads to cooling.
  5. Liquid gas enters the evaporator.
  6. In the evaporator, the refrigerant is blown up warm inlet air From the room with a fan. Heated occurs (the evaporator plays the role of the heat exchanger) of the working fluid, which boils and goes into a gaseous state.
  7. When evaporating the refrigerant gives the evaporator the cold and takes heat.
  8. Gas enters back to the compressor.
  9. The process continues in a circular cycle.

When changing the mode for heating, the process occurs in the reverse order. The evaporator assumes the function of the KKB and heats the air due to the transition of the refrigerant from the gaseous to the liquid state. CKB turns into an evaporator.

Benefits

Multi split-system differs from ordinary equipment of this type by the fact that the device in it allows you to connect several internal elements to one external unit. This configuration looks optimal to install immediately in three rooms.

Benefits:

  • Wide functional coverage. Different models make it possible to connect from 2 to 9 blocks with a power of each up to 9 kW. The ability of the system cooling with total area up to 100 square meters m.
  • Variability of technical capabilities. Allows you to choose in each room internal blocks with the desired power parameters.
  • Aesthetics and saving space. Mounting only one external block on the building wall. Such a system does not spoil the facade of the building with numerous communication elements.
  • Ease of management and maintenance from one point. Regulation of the system operation in all places of installation.
  • Efficiency. Consumes less resources.
  • Acceptable price. Purchase of one multi split system costs cheaper than the purchase of several ordinary models. Installation is also made easier and cheaper.

Many experts call the key minus of all multi split systems that all blocks of such equipment can only work in one direction: heating or cooling. But this minus is doubtful, since the control system allows you to adjust the settings of each internal unit separately, i.e. in each room you can adjust the optimal temperature mode.

The only substantial minus multi split systems is the failure of the external block will lead to the termination of the entire system.

The average life of the split system of more than ten years. For proper installation, competent operation and timely maintenance equipment will last fifteen-twenty years.

Models

The market is represented a large number of Split systems of various manufacturers. You can choose models from world corporations, and you can purchase a sample from a company that specializes only at the production of air conditioners and other similar equipment.

To lead brands offering high-quality multi split systems include:

  • Daikin.
  • Mitsubishi and Mitsubishi Electric.
  • Pioneer.
  • Hisense.
  • Toshiba.
  • Hitachi.

Decent and high-quality models offer all the leading manufacturers. To pick up the optimal and efficient air conditioning for 3 rooms, you need to pay attention to the following parameters:

  • system type;
  • the number of connected blocks;
  • power;
  • the volume of rooms that can cover the device;
  • modes of operation;
  • the presence of an inverter;
  • noise level of external and internal blocks;
  • the presence of additional functions;
  • complete set of fixation tools;
  • filtering equipment;
  • the presence of the "winter set".

It is important not to chase at the cost when installing. Installation of equipment - the occupation is complex and expensive. Dismantling, in the event of a breakdown or replacement, can do 50% of the cost of equipment. It is better to overpay for quality at the stage of primary purchase and installation, the later pay for the alteration and replacement.

In northern latitudes, it is worth purchasing systems that provide for the "Winter Set".

This equipment allows you to protect external block From freezing low temperatures. When installing, use the original parts, especially the installation of the external unit.

Installation

Installation of air conditioning systems need to trust experimental masters, so on. The efficiency, correctness and durability of the equipment depends on the literacy of the installation. The best decision - Ordering installation in the company where equipment is purchased. So, the performers will be interested in competent installationFor maintenance and repair, with good performance, will turn to them. In the event of a breakdown, workers will not disappear, since people are not responding for the result, but the company with which the purchase agreement is issued and installation. It is best to mount the system at the construction stage, if it a private house, or during the repair period in an apartment building.

Sequence of action during installation Split system for 3 rooms:

  1. System Planning: The location of the CKB on the facade of the building, the location of the internal blocks in the premises, passing the lines of communications.
  2. When planning and coordination, the distance between the blocks, the efficiency of the air conditioner in a particular location, the availability of others engineering networks in the building (heating pipes, water supply, electricity of the net). It is important to take into account the location in the rooms of furniture, home appliances.
  3. Marking of location locations and connections lines. Check equipment equipment.
  4. Drilling of holes and sticking channels on the markup.
  5. Laying the heat-insulating highway and wires connecting blocks.
  6. Installing brackets on the facade of the building. Fixation to the brackets of the outdoor unit.
  7. Installation of internal blocks in the rooms.
  8. Testing system operation.
  9. Vacuumization of the route to protect against moisture and hitting foreign objects.
  10. Work on the sealing of holes and close the channels in the walls.

After installation, the split system for three rooms is important not to forget about mandatory system maintenance.

The air conditioner blocks require annual cleaning, replacing filters and refrigerant updates.

Violation of service rules will significantly reduce the efficiency of the equipment, will reduce the service life and increase the risk of breakage.

To share with friends:
Similar publications