Anti-slip agent. Protective anti-slip floor coverings. Features of the action of anti-slip agents

Choose and buy anti-slip products

Despite the external attractiveness of the surface, lined with ceramic or porcelain tiles, natural or artificial stone, such coatings become rather slippery after contact with a certain amount of liquid. To protect the surface and prevent accidents, it is recommended to use special anti-slip agents.

Features of the action of anti-slip agents

Modern anti-slip products can be used both indoors and outdoors. When interacting with natural material, they dissolve some of the silica, resulting in invisible microscopic nicks that make the surface non-slip.
Anti-slip agents- These are preparations that are great for treating the surface of the bath, floors in the kitchen and dining room, shower and bathroom, swimming pools and saunas, medical and educational institutions, offices and other in public places. We offer compositions of various manufacturers at reasonable prices. Often, one liter of high-quality composition is enough to create an anti-slip coating for 10 square meters. m of surface. The composition is practically odorless, completely safe, does not change the original appearance of the coating (it only becomes slightly matte).

How anti-slip compound works

Operating principle anti-slip agents lies in the fact that getting on the treated surface, it contributes to the emergence of many invisible to the eye and inconspicuous to the touch micropores. It corrodes the surface, creating microscopic irregularities, the liquid is forced out of them under the influence of shoes, and the pores themselves act like suction cups, preventing slipping.

Advantages of anti-slip compounds:

• increase the surface friction force;
• prevent falls on slippery surfaces leading to injury;
• long enough to act (applied every 2-3 years);
• do not leave marks and streaks;
• have no smell;
• harmless to health;
• easy to apply.

How are anti-slip agents applied?

The application of anti-slip agents is carried out in the following sequence:

• surface treatment with detergent;
• coating drying;
• uniform distribution of the composition, preventing the formation of puddles;
• after treatment, the surface must be dried again;
• Anti-slip coating is ready! Now the floor no longer slips.

Lobacare SportCare is a DIN 18032 anti-slip care product for gym flooring. Designed for the care of varnished parquet and wood floors, as well as linoleum. Gives the surface of the parquet shine without polishing. It is recommended for maintenance of floor coverings in areas where particularly high requirements are placed on the anti-slip coefficient of the surface: sports halls, entertainment complexes, public institutions, dance halls.

Characteristics

• Producing country Germany
• Color Transparent
• Consumption 30-40 g/m2
• Basis Water
• Number of components 1

• Shelf life, years 2
• For works Internal
• Volume, l 1
• Product SKU SportCare
• Weight, kg 1

Application area

For the maintenance of varnished parquet and PVC and linoleum floors in sports halls. Ideal for use in combination with Lobadur's water-based sports floor varnishes.

Advantages

High resistance to streaks and marks from shoes. Prevents slip injury. It has an anti-slip coefficient according to DIN 18032. Extends the life of the floor covering. Protects the varnish layer from the formation of marks from sudden braking. Improves optics and refreshes old coatings.

Drying time

You can walk in 1-2 hours. Full load after 12 hours.

Compound

Less than 5% anionic surfactants, preservatives, polymer dispersion components, aqueous solvents, aromatics.

Coating preparation

First remove dust and dirt with a vacuum cleaner, brush or mop, then wipe the surface with a slightly damp cloth with Loba CleanFix or Cleaner. Residues of other care products must be removed by general cleaning with Loba CareRemover. Observe the instructions on the technical data sheets for the respective products.

Application

Shake the material container thoroughly. Evenly apply SportCare to the cleaned, dry parquet using the Lobatool Wischwiesel care brush (consumption approx. 30-40 ml/m²), large areas alternatively, you can use a wide mop or other suitable tool. On large areas, apply the material to separate plot coating, and then spread over its entire surface in an even layer. Work without pressure, if possible hold the application tool horizontally to the parquet surface and do not lift it up. Start application from one side of the room and, moving from wall to wall, finish at opposite side the premises where Entrance door. In one room, it is necessary to apply the care product immediately to the entire surface. Do not apply the product a second time during drying, as this can lead to streaks. After drying for 1-2 hours, you can carefully walk on the parquet.

Gliss Guard- anti-slip agent for anti-slip treatment. Anti-slip treatment of any slippery floor and floor covering made of mineral building materials, including polished surfaces - concrete and porcelain stoneware, natural stone, ceramic and tile.

• For external and internal works;
• Safe on the appearance of most surfaces, reduces gloss slightly;
• Effective anti-slip agent;
• The product is ready to apply, easy to use.

Purpose:

Anti-slip agent GLISSGUARD® reduces the risk of falls on mineral surfaces such as: stone and artificial tiles, ceramic tiles, marble, terrazzo, granite, etc.

GLISSGUARD® is used to protect against slippery floors in industry, public buildings and private homes:

• at public transport stops,
• in public institutions
• in nursing homes,
• in the lobbies
• anti-slip treatment of street pedestrian areas,
• in gyms, swimming pools,
• in the kitchens
• baths, showers and bathrooms
• and wherever there are slippery floors, especially when wet.

Note:

When treating slippery polished floors, the gloss may not be significantly reduced. With a decrease in brilliance GLISSGUARD® can be diluted while maintaining the same duration of action. If the anti-slip effect is not achieved after the first application, apply again. Concerning, it is recommended that the initial treatment be carried out by a specialist.

About impregnation (protective agent):

Gliss "Guard is a product in the aqueous phase, absolutely safe, which can be used without taking any special precautions. Regular care anti-slip is made by Gliss "Guard in a very
diluted (20% product to 80% water). Surface care indefinitely prolongs the protection of the floor against slipping.

Many anti-slip agents on the market contain an acid, in particular hydrofluoric acid (or hydrogen fluoride). This acid is highly corrosive. It reduces the slip of the floor by using the property to break down the silica present in mineral materials. When the anti-slip agent based on hydrofluoric acid is applied to the surface, the silica crystals dissolve and damages - cavities - form on the surface of the floor. A so-called "suction cup effect" is created on the surface (see 2).

The main danger is the use of dangerous products at home or in public places. In this case, a much less significant inconvenience is a change in the appearance of the surface. Over time, the surface loses even more of its appearance, as quenches and voids in the surface are filled with dirt and dust. Caring for such a surface is much more difficult.

Gliss "Guard is a revolutionary tool. Silica, which is part of the floor material, enters into chemical reaction with the active component of the agent, as a result of which the silica molecules of the surface cling to themselves new molecules. Thus, a microthorn is formed on each crystallization center (see 3).
As a result appearance surface remains practically unchanged, and it turns out best defense floors from slipping, for a long time,

Floors made of stone, porcelain stoneware, ceramic tiles quite popular. This is understandable - they are practical, comfortable, aesthetic. However, with a lot of advantages, there is one significant disadvantage: when moisture gets in, such a floor becomes very slippery.

Wet floor in the bathroom or in the kitchen, tiled floor in the office during the winter slush turns from interior decoration into a real threat to health.

To prevent falls and injuries, the use of a special anti-slip coating.

Properties of anti-slip coatings

After applying the protective composition, numerous micro-roughnesses form on the floor surface, due to which the adhesion between flooring and the sole increases hundreds of times.

After processing protective composition the floor does not have to be covered with rubber anti-slip mats, which contribute to the accumulation of dust and dirt and make cleaning difficult.

The applied composition does not change the appearance of the floor. Presence protective coating imperceptibly, but when walking, the difference between the treated and untreated floors is immediately felt!

The anti-slip composition can be used to process porcelain stoneware, marble, ceramics, granite and other similar materials.

The application of this composition does not require the use of special equipment. The floor can be walked on almost immediately after treatment.

The properties of the anti-slip coating are retained for a long period of time: depending on the intensity of traffic, it can be effective for up to 5 years.

In which rooms is it recommended to use anti-slip protective coatings?

Such protection should be applied in any room where there is a possibility of moisture on the tiled floor.

It is very important to apply protective anti-slip coatings on stairs and entrance groups, especially in places with high traffic.

They should be applied in offices, halls and trading floors where the floor is covered with glazed or polished tiles or other low adhesion materials.

Such an anti-slip coating will be indispensable in home kitchens, as well as in the kitchens of bars, cafes or restaurants.

Showing all 3 results

Anti-slip agent

Luxurious, sparkling floors made of stone, ceramic tiles or polished parquet will decorate your home and public premises, and the anti-slip coating Gliss Guard will take care of your safety.

The composition is used for processing granite, marble, ceramics, concrete and other mineral horizontal surfaces. Gliss Guard works effectively indoors and outdoors. open spaces– wherever there is a risk of slipping.

Advantages of the drug

NOVOTECH offers in Moscow the most affordable prices on anti-slip tile coating, which allows you to handle large-scale surfaces - in industrial and commercial facilities, in swimming pools, gyms, outdoor pedestrian areas.

The composition is harmless to humans and sex. The material does not contain solvents and acids. The level of biodegradation is 90%. The use of the material does not require special precautions.

Anti-slip coatings on the steps, which have corrosive acids in their composition, destroy the treated surfaces. The peculiarity of the composition is that the main element of this one-component agent is silica.

The protective effect of the mixture is based on the interaction of its active component with the coating material. Silica molecules adhere to each other, constantly building up a new protective layer over the existing one. On the centers of crystallization, micro-spikes are formed that prevent slipping.

Gliss Guard - anti-slip coating for the porch and street, for the floor interior spaces, which does not destroy the original material and practically does not change its appearance. The gloss of the polish may be slightly reduced. Reducing the concentration of the drug without compromising the anti-slip effect will help solve the problem. The standard composition of the working solution contains 20% mixture and 80% water.

Proper use is the key to durability and high quality protective coating

Before you buy an anti-slip coating on the steps to the street or for the floor, carefully study the functionality of the composition. Professional advice from NOVOTECH experts will help you correctly calculate the optimal amount of the preparation for treating a particular surface. The consumption of Gliss Guard is 8 - 10 liters per m 2 - depending on the structural features of the surface.

The protective layer formed by the composition does not require constant updating. At correct application Gliss Guard has been performing its functions flawlessly for at least 2 years.

The composition greatly simplifies the cleaning process and helps to protect decorative coating from pollution.

The NOVOTECH online store sells the composition of Gliss Guard in polyethylene canisters in convenient packaging - 0.5l, 1l and 5l.