How to make an apparatus for producing living and dead water. Device for preparing live and dead water

The operation of this device is based on the principles of electrolysis and the splitting of water into ions. Containing negative ions is called catholyte, or among the people "Living", while those with positive ions are called anolyte or "Dead". In order to separate both types, an ion exchange partition is required between the electrodes.

It is believed that the catholyte is alkaline and has a positive biostimulating effect. It is mainly used in medical practice to treat various ulcers and wounds. Some gardeners use it to improve the growth of seedlings, some process vegetables and fruits by placing them in winter storage.

Dead water is acidic and has a sterilizing and disinfecting effect. It can be used to treat various skin diseases, as well as to disinfect premises and handle dishes.

The device diagram can be easily and quickly assembled with your own hands. To do this, we need a diode bridge, steel electrodes and a piece of tarpaulin or its equivalent as a separation filter.

When the device is turned on, an alternating voltage passes through the diode bridge, is rectified and supplied to the electrodes, which are in a jar with clean drinking liquid. Moreover, the positive electrode must be placed in a tarpaulin filter.

The canvas filter can be easily sewn, so that the electrode can easily fit in it. It is best to use stainless steel for making electrodes. But if you are going to drink the resulting liquid, use only food grade stainless steel, but I would advise you to refrain from ingesting it. The distance between the electrodes should be at least 4 cm on average, the sizes of the electrodes are arbitrary.

We turn on the device for 15 minutes or more, depending on what concentration we need the solution, before pouring the solution, do not forget to disconnect the device from the mains in order to avoid electric shock. The solution from the tarpaulin filter must be immediately removed from the can, otherwise it will mix and lose its properties. It is not worth storing the resulting solutions for a particularly long time, it is better to use it immediately, and if necessary, do more.

Ever since the days of Hyperborea, knowledge through the troubled centuries about medicinal properties silver water and its bactericidal properties have come down to our times. In the scientific works of the current cycle of civilization, scientists of the 19th century proved that silver has a disinfecting effect and is capable of destroying various microorganisms, including diphtheria bacillus and staphylococcal infections. Silver is an excellent bactericidal agent compared to copper and gold. This is really so, because Ag ions can quickly penetrate into the cells of the human body, and they do not lose their viability.

There are two electrodes in a container with a liquid, between them there is a tarpaulin partition. When a high DC voltage is applied to the plates, the electrolysis process takes place in the vessel.

The source of high voltage is a step-up transformer with windings for 250, 500 and 750 V, designed for currents up to 0.6 A. The rectifier is assembled in a bridge circuit on eight D246A power diodes. Resistances are connected in parallel to them to equalize the reverse voltage surges. Diode V9 reduces the ripple current in the electrode circuit. The electrolysis mode is monitored using a PA1 M2001 ammeter for 3 A and a PV1 M2001 voltmeter for 600 V. The S1 toggle switch sets the voltage on the electrodes, and a 6.3 V lamp is an indicator that the living water device is turned on.

ATTENTION!

If you decide to make and use the device yourself, then YOU assume all responsibility.

● OPTION 1

Legend in the figure: 1 - bank; 2 - cover; 3 - electrodes; 4 - diode D231 or D232 (you can D246 or D247); 5 - canvas bag; 6 - anode ("dead") water; 7 - cathode ("living") water.

(Proposed by the inventor D.I.Krotov)

Explanations for the figure

1. Anode - a plate connected to the network through a D246 or D247 diode (D231 or D232 can be used).

2. Cathode - a plate directly connected to the network.

For better straightening alternating current network, you can solder two diodes to each electrode, observing their orientation, or connect the electrodes through a bridge.

3. Anode and cathode are made of food grade insensitive plates of stainless steel about 160x4x0.8 mm or 190x30x1 or 2.5 mm in size, but if possible, electrodes (especially the anode!) are better made in the form of pure graphite rods (about 160 (190) x15x15 mm in size). The plates are fixed on an insulating polyethylene or plexiglass cover parallel to each other, at a distance of 30-40 mm from each other.

4. Glassware - for example, a liter jar.

5. Capacity for anolyte: a) a tarpaulin bag - made of a thin tarpaulin with a volume of 400-450 cm 3 (5-7 cm in diameter and 16-17 cm long). It can be made from a fire hose; b) ceramic unglazed glass of the same size.

Preparation of activated water

Lower the anolyte container (canvas bag, ceramic glass) into the glassware and pour water into them to the same level, without adding about 0.5 cm to the upper edge (the upper edge of the anolyte container should be above the water surface in the jar). Water can be taken directly from a water tap (if the water is chlorinated, then it must be allowed to stand for several hours before use) or boiled. Lower the positive electrode into a tarpaulin bag (ceramic glass), the other electrode into the jar, plug it into the mains. Inside the bag (glass) acidic "dead" water is formed (pH = 6 or less), in the jar - "live", alkalinity up to pH = 10 (7). After turning on the installation in the network, you need to wait about 8-10 minutes for the water to heat up to 60-70 degrees, and the activated water is ready. Then disconnect the plug from the mains, quickly remove the electrodes from the jar, take out the container with "dead" water and pour into another dish.

In "living" water, white flakes can be observed - these are hardness salts released from tap water in the process of electroactivation, which can be removed by filtration. And if you let the water settle, then they will settle to the bottom, and after using the catholyte, the sediment is poured into the sewer. "Living" water is clear, alkaline in taste, easy to drink.

"Dead" water has a darkish tint, sourish taste, hard to drink.

If you have graphite electrodes, then some of the coal (insignificant and not visible at first) remains in the solution. Coal settles over time and can also be filtered. But it is harmless.

In the process of work on the cathode and the anolyte container (canvas bag, ceramic glass), white bloom hardness salts, which periodically (after approximately 300 ... 400 minutes of total operating time, at least) need to delete in the following way:

a) the cathode is cleaned by wiping it with a cotton swab or a rag soaked in vinegar (10% hydrochloric acid solution is allowed);

b) from time to time change the electrodes in places, that is, at one time the electrode serves as a cathode, then as an anode - self-cleaning of the electrodes from hardness salts deposited on them occurs;

c) a container for anolyte (canvas bag, ceramic glass) is immersed in table vinegar for 20 ... 30 minutes. To do this, use any small dish or jar in which an anolyte container can fit. After the washing procedure, thoroughly rinse off the remaining vinegar warm water under the tap. Spent vinegar is reused many times.

As a rule, a canvas bag without washing is usable for no more than 2-3 cycles.

The bag and jar must be kept separate.

The main reasons low current of electrical activation are the presence of deposits of hardness salts in the pores of the canvas bag (ceramic glass) or a slight mineralization of the water used. In this regard, it is necessary to carry out a correspondingly thorough washing of the anolyte container (see above) or use water from another source with a higher degree of mineralization. Allowed in tank for anolyte pour a weak (1 g per 1 liter of water, no more) solution of sodium chloride NaCl, obtained by dissolving 1 g of salt in a one-liter glass jar. In this case, the electrical activation time is approximately halved.

The main reason high current of electrical activation is an unnecessarily high degree of mineralization of the water used. In this regard, it is prohibited to use (fill in both containers - for catholyte and anolyte) water with added salt or mineral water.
In this case, for electroactivation, use passed through or bottled clean drinking water, as well as boiled water cooled to room temperature.

● OPTION 2

Electrolyzer for obtaining "living" and "dead" water

The body of the electrolyzer is a glass jar of the required capacity. The electrodes are made of PURE graphite (a rod and a piece of a cylindrical graphite electrode), a contact tin ring is made on the cylindrical graphite electrode, to which the tap is soldered. The tin ring must be above the water level.

Inside the negative electrode, a glass is made of tarpaulin, coarse calico or canvas (in other designs - a bag, depending on your skills in working with the material), the tarpaulin is sewn to a glass tube rolled into a spiral. The main thing is to make the cup easy to take out.

The central electrode is fastened to a heavy flat piece of plastic (not shown in the figure), which is laid over the neck of the can. You can attach it to a standard polyethylene lid, but remove the electrode lid from the jar with hot water(it gets very hot during processing) is dangerous and inconvenient. A handle made of wood or plastic is attached to the segment, the head of the electrode with a wire soldered to it is closed with an insulating plate (the electrical tape will not work - it will start to melt when overheated).

Current limiter is a 60 W incandescent lamp included in electrical network 220 V in series with a rectifier bridge. The lamp can be painted red (lit - danger) and its cartridge can be placed in the structure of a protective box (chest), in which the filled can will be placed. It is necessary to carry out a safety switch that disconnects both wires coming from mains plug when lifting the lid. The main switch is mounted on the top of the cover. IT IS FORBIDDEN TO REMOVE THE JAR, COVER WITH THE ELECTRODE, without disconnecting the device from the mains 220V.

Current flows in the circuit I = 60W / 220V = 360mA, in a radio parts store buy a rectifier bridge KTs-402A ... KTs-402E (in this case the detail will fit with any letter). Examine the part carefully - there are pole markings on it. Place the circuit in a sealed box on the wall of the protective box (chest) so that it does not cling to the jar you pull out. Connect the wires as shown in the sketch (arrows - to the cell bank).

"Dead" water is formed inside the bag-cup, and "live" water is formed in the jar. After connecting the installation to the network, you need to wait 10-15 minutes (when the water has heated up to 60-70 o С - it's ready). Then remove the plug from the socket and drain the "dead" water into another dish. A canvas bag (cup) can be used 1-2 times, then washed. The plaque is deposited on the bag. You need to store the bag separately from the can - so that it dries out normally. The proposed device allows you to obtain "live" (alkaline) and "dead" (acidic) water of any strength. After completion of the work, the elements of the device are washed. To facilitate this process, water is poured into the vessels, the connection of the electrodes is changed and the charger is turned on for 2-3 minutes. "Dead" water will remove the deposited salts on the walls of the elements, and all that remains is to rinse and dry them.

● OPTION 3

Authorship in the topic of water electroactivation is a very dubious matter, since this principle has been known for a very long time. I am publishing this design as an author's design, since the design described below is my own long-term experience.
The installation has a multipurpose purpose from its own healing and wound treatment, to germination of seeds and acceleration of plant growth. In fact, it has been noticed that if plants are watered with "living" water (catholyte) in winter, they begin to bloom. Wounds treated with "dead" water (anolyte) heal faster.
In terms of healing my own body, I can only say one thing: this is a purely individual and voluntary matter. A lot of articles on the use of water, divided into fractions, have been published in due time - if you wish, you can easily find them. My task at this stage is more modest - to show the drawings of my installation.
This device was assembled without any preliminary preparation from quite improvised means found without leaving home.
The main parts are electrodes. They do not have any special difficulties in manufacturing. The only thing that must be noted is that the material from which they are made should only be food grade stainless steel (not sensitive to magnet!; As an anode, if possible, it is better to use a pure graphite rod with a section of about 15x15 mm - Approx.). Technical, as you yourself understand, will not work for such an installation. Personally, a burned-out electric coffee pot, an ancient one, from Soviet times, was very useful to me. What fate he stayed with me, I myself do not understand, apparently his fate was like this ....

As you can see from the picture - nothing complicated, two L-shaped plates with a hole for fasteners and contact. One plate has such a peculiar cut - when bent at an angle of the middle protrusion, it is a hook for hanging the bag. It is not necessary to make such a fixing cut on the second plate.
The next part for manufacturing is the stiffening plate. It is designed so that the electrodes do not touch each other in any way during the operation of the device. 220 in water, you know, it's not a pleasant thing.

When used as supporting structure This plate will not be superfluous for an ordinary plastic lid for a can, since during the operation of the device there is a slight, albeit almost imperceptible, heating, and you know how the heated polyethylene behaves. So, just in case, it doesn't hurt.
The next piece is the anolyte collection bag. Here it will definitely be hard without female hands. The material for the bag is a thin tarpaulin. For example, a tarpaulin from a gas mask bag came in handy. The selection criterion is heavy blowing air through it. It is better not to use synthetic materials - it is difficult to guess what filth they will emit in the work.
When these components are ready, you can take the lid. The most common jar lid. You need to make 3 holes in it: 2 fastening holes, one gas outlet.

During the operation of the device, gas evolution is noticeable near the plates. Apparently, the processing is proceeding according to the type of weak hydrolysis, respectively, gas evolution is a by-product. This hole is just for equalizing the pressure inside and outside the can with the lid closed.

The order of assembly of the device can be clearly seen in the figure below:

As you can see, nothing complicated. It can be noted that there should be two nuts on each bolt. One for fastening the electrode, the other for ensuring reliable contact. For contact, pads from diodes of the KD202 type are used, sandwiched between two washers.
Any diode with an operating voltage of about 400 volts can be used. The only condition is that you need to connect it as shown in the figure, otherwise you will get anolyte not in a bag, but around it, i.e. the opposite is true. If you use the KD202 diode, then you can directly attach the anode plate to its thread, note - the anode one, because it has an anode on the body. And the cathode is then connected directly to 220.
True, I myself used a diode bridge in general. As you can imagine, a full-wave rectifier has twice the performance.
During operation, you can notice the following:
- The edges of the bag should be slightly above the water level to prevent mixing of fractions.
- Exposure time 10-15 minutes. Or until the jar is lightly heated. You can, of course, raise the literature and measure the acidity of the anolyte with litmus tests, etc., but I think this is superfluous. The strength of the anolyte can be easily determined by its smell.
- Do not use tap water directly. With the chlorine contained in it, it is quite possible to assume that HCl will be present in the anolyte, i.e. hydrochloric acid. The water needs to be defended for at least 4-5 hours.
Note: All dimensions are based on a 3 liter can.

Source: http://lavr30.narod.ru

● OPTION 4

The above options for obtaining "living" and "dead" water have one drawback.
The thing is, it is quite troublesome to use a separation pouch. It is necessary to take out "living" water very carefully so as not to mix it with "dead" water. It is not comfortable. For elimination this disadvantage it is proposed to use not one dielectric capacity for water, but two. The containers are needed without necks, i.e. with straight walls. We place the containers next to a small gap and pour approximately equal amount of water into both (but not to the brim). We place the anode in one container, and the cathode in the other. Now a little subtlety. It is necessary to make a conductor for installation between the containers. To do this, a clean cotton roll is wrapped in clean gauze, tucked into a clean soft insulating tube for electrical wires so that its ends protrude slightly from it and is abundantly saturated with water. The conductor is placed between the cans so that its ends are in both cans, i.e. we connect the liquids of the cans with a kind of jumper. Ions will move along this jumper and accumulate in different containers. After the "separation" of water, it will be enough just to turn off the voltage and remove the "jumper" - "living" water in one jar, "dead" in another. In the break of one wire coming from the rectifier bridge to the electrical network, you need to turn on an electric light bulb of 15 ... 25 W at 220 V (used for lighting in refrigerators, sewing machines, etc.). Firstly, this will protect the circuit from a possible short circuit (with a "short circuit" in the circuit, the light bulb will only burn at full heat). And secondly, it is needed as an indicator of the end of the process. We begin to separate the water - the light is on. Gradually, the brightness of its glow decreases. When the lamp goes out completely, the separation of water can be considered complete.

● OPTION 5

For those who would like to experience the properties of activated water when growing or healing indoor plants, germinating seeds or harvesting seedlings garden crops, we offer a description of the simplest apparatus made by the inventor V. Khakhalin.

SAFETY RULES

1. You can connect the device to the electrical network only when it is filled with water and the electrodes are in the jar.
2. Do not touch the bank and the case of the device when it is plugged in.
3. You can remove the device from the jar only when it is disconnected from the mains.
4. Not allowed to be used by children.
5. Do not leave the device unattended.
6. The responsibility for observing safety when working with the device rests entirely with you.

Remember that 220 V is deadly!

ATTENTION!

According to experts, the preparation of activated water in homemade installation with a stainless steel anode poses a health hazard to those who try to drink such water. The fact is that stainless steel, the vast majority of metals and alloys, are not resistant to anodic dissolution. When an electric current is passed, electrodes made of these materials dissolve, and ions of nickel, chromium, vanadium, molybdenum pass into water, and from it into your body, poisoning it. Long-term use of such water is fraught with the emergence of various, including serious diseases and disorders, including cancer. In the manufacture of approved electroactivators, resistant materials are used (in particular, for the manufacture of cathodes - titanium or special food grade stainless steel with special coating, anodes - platinum, special coatings, ultrapure graphite, for the manufacture of a separating diaphragm (containers for anolyte, "dead" water) - special ceramics). Passing through the reactor, activated water acquires the properties of a "maser" - a system of highly active ions, molecules ("microgenerators"). Thus, the molecules of activated water are a kind of miniature generators ("Kremlin tablets"), which, passing through the body, carry out its "restoration" - treatment with a resonance field. And therefore, even a small amount of a substance dissolved in such water has significant effects (an effect akin to homeopathy).

If you still have the opportunity to purchase an activator industrial production- do it, do not save on your health and well-being of your loved ones!

Such "savings" can turn into high costs and sad consequences!

Currently, to obtain healing water, it is not at all necessary to look for some kind of mountain springs and reservoirs. It is quite possible to obtain it by electrolysis of ordinary tap water in. From a chemical point of view, living water is alkaline and therefore excellent in wound healing. And dead water is a unique disinfectant, as it contains acids. When passing through ordinary water, an electric current completely changes its structure.

Accordingly, after treatment with current, the water is divided into two fractions. Each has certain healing properties. It is generally recommended to use living and dead water in combination to achieve maximum result.

Diy apparatus of living and dead water

On sale, you can easily find special devices for obtaining activated water. But such a device can be made independently. To do this, you need to take an ordinary glass jar with a lid and fix the electrodes on it with nuts and screws. One of the electrodes will be the cathode and the other will be the anode. Dead water will evolve at the positive electrode. This means that a bag of thick fabric... Coarse calico is ideal for such purposes. The main thing is that air passes through the fabric normally.

Real "living water" is not ready yet. Now it needs to be slightly frozen. When there is little ice on the surface, you need to make a hole in it. Pour water into a prepared container through this hole. Ice can be thrown away, isotopes have collected in it.

Now you need to freeze the remaining water again. This time, it should be about 2/3 cold. At this stage of preparation of "living water" it is necessary to pour out, on the contrary, unfrozen water. From the ice that remained as a result, and "living water" when it melts. Drinking it is very beneficial for the body.

Related Videos

note

Keep " living water"You can do no more than 6-7 hours, then it will lose its miraculous properties.

Sources:

• how to make living water yourself

Many apparatus you can do it yourself at home. For example, you can make a device for cooking alive and dead water... Living water is water charged with a positive charge, dead water - negative. Drink alive water promotes rejuvenation and cleansing of the body.

You will need

• Two plates made of food grade stainless steel, 5 cm wide, 15 cm long.
• Semiconductor diode.
• Plastic case with removable lid long 20 cm.
• Wire with a plug.
• Two cans of water.
• Wires.
• Screws.

Instructions

Attach two stainless plates to plastic case... To do this, cut two parallel slots in the bottom into which the plates can pass. Slots should be at opposite ends of the body. Then insert the plates into the slots and secure them with screws.

Related Videos

note

Never grasp the electrodes when the device is on, do not immerse your fingers in water during operation, and keep the device out of the reach of children.

Helpful advice

The electrodes can be made of carbon or carbon-silicon. Silicon-carbon electrodes additionally enrich the water with silicon.

Sources:

• Master class on creating an apparatus for preparing living water
• how to make an apparatus living dead water

It has long been known that drinking tap water water not only not useful, but also harmful. Although a water filter has become an important attribute of a city dweller, its purification is not the last stage on the path of transforming water from dead to living. By and large, any natural water (from a clean stream or reservoir, spring, rain) is living water. Clean streams and reservoirs are still preserved in the depths of the Siberian taiga. However, even in urban conditions, you can get living water, which will cleanse the body, and also relieve many diseases with prolonged use.

Instructions

According to scientists, the most useful water (which is popularly called) has a structured structure. What are the advantages and differences between structured water and ordinary water? Firstly, structured water removes toxins and toxins from, cleanses every cell of the body. The unique properties of such water are explained by its high penetrating properties. Secondly, as scientists have proven, a person who uses structured water is less likely. Children with allergies experience noticeable relief, and in adults, blood pressure is normalized. To create such an elixir of health, youth and beauty, it is necessary to return the filtered water to its natural crystalline structure. And for this there are simple, but very effective ways.

There are several ways to restore water to its natural structure. One of them is freezing. In this case, it is assumed that water is melt water, which is obtained from ice and snow. This can be obtained using the technology of nature itself. This is one of the most time-consuming methods, but on the other hand, every family has water and a freezer, which means that everyone has the opportunity to prepare living water.

First, pass the water through any filter, then place it in a frost-resistant container. In winter, the water can be simply taken out, and in the summer, it can be put in the freezer. After some time, the first ice crust forms on the surface of the water, it should be removed. After that, wait until another two-thirds of the water freezes, punch a small hole and drain the unfrozen liquid through it. Now defrost the piece of ice and enjoy pure living water. It should be remembered that it is undesirable to boil melted structured water, re-freeze it and store it for a long time.

It is useful to drink in the morning on an empty stomach a glass of cold melt water instead of the usual mug of tea or coffee. All liquid that is drunk in the morning is excreted from the body, cleansing it. While the liquid, drunk, remains in the body, causing swelling. As for boiled water, the body does not assimilate it. If you want to boil water, bring the kettle to a boil (when little bubbles appear) and turn it off immediately. In a glass of cold melt water to taste, you can add 1 tbsp. a spoonful of honey, lemon juice or apple cider vinegar, this additionally stimulates the body, gives vigor and higher efficiency.

Another type of living water is magnetic. Scientists have long proven that it has a special permeability through cell membranes, a strong bactericidal effect, stimulates immunity and improves metabolism, and also cleans blood vessels from foreign proteins and cholesterol plaques. To magnetise ordinary drinking water, you need a special magnetic funnel or tap attachment. In many cases, manufacturers add a magnet to the water filter. You can find out about this on the label for the filter, where this information must be indicated. Healing properties magnetic water persists for one day.

One more good way revitalize water - insist it with silicon, which can be bought at any pharmacy. To do this, put 3-5 pebbles of black silicon on 3 liters of water, cover the container with gauze and leave to infuse for two days. Then carefully pour the water into another container, without pouring 2-3 cm of liquid at the bottom of the container, because flint precipitates harmful chemical elements and microorganisms. The resulting water will be saturated with silicon. As you know, this one is very important for the full functioning of the human body.

Further, the obtained silicon water can be improved by the freezing method described above. It is best to freeze it in a non-metallic container, such as plastic or impact-resistant glassware. When the ice melts, you get the same living water. Getting it is troublesome, but worth it. You need to store silicon water no more than 6-7 hours.

The ability of a unique stone - shungite - to structure water has been known for a long time. It collects up to 95% of various pollutants on its surface, removes heavy metals from water, removes colloidal iron water pipes, dioxins, phenols, pesticides, nitrates, nitrites, helminth eggs and many others, etc. After cleaning with shungite, water can be boiled, so you can brew tea or cook food on it.

Rinse the shungite stones thoroughly for several minutes before use. Then put it on the bottom of a container with water and leave it for three days. From time to time it is necessary to remove the appearing white bloom on the shungite, and approximately once every 6 months, replace the stones with new ones. Shungite water is also effective for cosmetic purposes, because it protects the skin from free radicals and premature aging.

Related Videos

Sources:

• website lionika.ru
• living water what is it

Water can be alive or dead. In order to get one, it is not at all necessary to go to a fairy tale. It is enough to electrolyze the water that is available in the house using special device... A device for preparing living and dead water is quite simple to make yourself at home.

You will need

• - liter glass jar;
• - two plate-electrodes made of aluminum;
• - inner vessel-glass, made of tarpaulin;
• - diode (D231) and insulated wires;
• - litmus strips.

Instructions

Take a liter glass jar. This will be the body of the device itself. Make sure that

Living and dead water.

Getting live and dead water turns out to be a very simple matter. And all this is based on the results of studying information about plane crashes, oddly enough. Dead water is distilled water. Please note that before receiving living water, it must be driven out after the water supply with water filters in order to get rid of harmful impurities.

So, how to get living and dead water. Water is considered dead - that which is light water, where there is a lot of steam inside the water. It does not affect the body as it should. In the normal state, we receive from the taps water mixed, living and dead.

Receiving living and dead water is based on the settling of water, depending on the volume for about a day (this is already with a margin). Then the solution of the lightest water, the top one, must be carefully removed without stirring, about 20 percent of the volume. Dead water is light water and the entire intramolecular solution of steam and water. This is how living and dead water is obtained.
You can get it in a faster and more expensive way - through the freezer. When about 20% of ice forms on top of the vessel, then all the dead water is frozen. This layer must be removed and the rest used.
Fruits and vegetables are also very easy to make "alive". When freezing to minus ten, dead water from fruits and vegetables leaves, but there is no need to freeze any more. Then you can add salt, pour over with syrup. Warm up to 30-50 degrees, but not higher. When boiling beneficial features vegetables and fruits go away.
This is according to Fyodor Muravchenko, General Designer, Head of the State Enterprise "Ivchenko-Progress", Chairman of the Board of the Corporation "Scientific and Production Association" A. Ivchenko "

"LAWS IN THE PHYSICAL SENSE OF THE WORD

THE FIRST LAW: LIVING WATER IS A WATER WHICH MOLECULES ARE LOCATED IN ITS VOLUME FREELY, INDEPENDENTLY FROM ANOTHER.

THE SECOND LAW: DEAD WATER IS SUCH WATER, WHICH MOLECULES ARE LOCATED INSIDE THE VAPOR MOLECULES AND FORM TOGETHER WITH VAPOR AN INTRAMOLECULAR STEAM AND WATER SOLUTION.
THE LAWS
IN THE PHILOSOPHICAL SENSE OF THE WORD

THESE LAWS ARE STORED AS FOLLOWS:

LIVING WATER IS SUCH WATER THAT FOR MANY SPECIES OF FAUNA AND FLORA, INCLUDING HUMAN, PROMOTES THEIR LIFE AND DEVELOPMENT.

DEAD WATER IS THE SUCH WATER THAT FOR MANY SPECIES OF FAUNA AND FLORA, WITH AN OVERVIEW OF NECESSARY WATER, HINDERS THEIR LIFE AND DEVELOPMENT. "
Taken from here

Traditionally, water on the energy plane of Man and nature also contains information for the natural-scientific understanding of water. Two intersecting triangles, a symbol of torsional strength. The same symbol is near water, in the form of two tetrahedrons, in one of the natural science models.

Getting live and dead water is simple and very possible at home. Perhaps there are devices that carry out the separation electrically. But if they do not exist, then it is quite possible to do it ourselves.
If we are talking about the properties of water in general, then it is quite reasonable to talk about the magnetic coding of water. Please note that besides the usual water coding, you should think about something else. A person is mostly composed of water, and amaze a person with your thoughts. Everything we think about other people affects them in the most direct way.

The usual coding of water can be done as follows: take a jar and put the signs you need on it. The water absorbs all the emanations passing around. So be careful when buying water. In general, all objects can take on passing emanations. But water does it more, because the very essence of water is created for this.
The clusters that water forms encode all the information that water meets. Therefore, water is very easy to code.
By the way, water clusters were discovered quite recently, in the 90s. Now they are being intensively studied, there are disputes at the scientific level.
By the way, the Slavs revered springs as sacred places. And the word "spring" itself contains what they put into it.

The first device for the production of living and dead water was described by the well-known to us G.P.Malakhov. It was at the beginning of 1981, and his friend Kratov was the author of the device developer. He did not at all set himself the task of investigating the medicinal properties of the water obtained, but apparently wanted to use the water for other, possibly household needs. But life turned everything in its own way.

Suddenly, the developer of the device fell ill, and not some common cold, but pneumonia, and even ended up in the hospital. There, doctors presented their patient with two more "surprises", informing him about inflammation of the kidneys and prostate adenoma. After lying in the clinic for more than a month, Kratov did not feel much improvement. And in response to the proposed operation for adenoma, he hurried to leave the hospital altogether.

But he was not going to turn to the device yet. If pills and injections did not help, then what can water do? Obviously, this is how the author of the ingenious invention reasoned, the significance of which did not even assume. However, perhaps he did not think about his appliance at all, having pushed it farther behind the cabinet. But most of all at this time it was not even his sores that bothered him, but for a long time for six months the wound that did not heal for six months in his son.

I must say that Kratov was loving father and kind person... He could not look with indifference at the suffering of the child. Therefore, I pushed the device out from behind the cabinet and, I can also only assume what he thought, but I hope that this very thought came to his mind: "What if living water will help?" No sooner said than done. Since then, the son began to patiently go for procedures to his own father, who carefully lubricated his wound with living water, twice a day applying sterile dressings soaked in this colorless, seemingly unremarkable liquid.

But he did not have to test the patience of his son, who, of course, was skeptical about his father's hobby for "folk" methods. The wounds healed on the second day! It was a shock for the whole family. And the author of the device was jubilant. And immediately he began to treat his adenoma with living water. He began to drink 0.5 glass of living water before meals three times a day. Less than a week later, the adenoma disappeared, and with it all the other sores that the author of the device suffered - hypertension, sciatica and swelling of the legs. The author of the device did not believe his feelings, so he went to the clinic and passed all the tests. It turned out that he was healthy!

Then the doctor-inventor began to treat his relatives and friends. But he started, as usual, with the neighbors, fortunately, the case turned up. A neighbor just scalded her hand with boiling water, so much so that the doctors diagnosed a 3rd degree burn. Instead of ointments, Kratov recommended the neighbor to use "live" and "dead" water. As a result of this treatment, the burn went away in two days!

Kratov did not deny anyone his help, Comrade. Kratov. He treated both adults and children. I even got a little boy with an abscess in his throat back on his feet in just three days. But even antibiotics did not relieve his inflammation! The little boy really liked the miraculous device and, he believed his uncle, the inventor, so he gladly rinsed his throat 6 times a day with dead water, and after that he drank living water. This combined treatment gave the result. Everyone, especially Dr. Kratov, was delighted with such a similar outcome. Now everyone called him just that. But you, dear readers, also want to rejoice, so I devote the next chapter to the most important issue of the production of a unique therapeutic agent - activated water, at home. It is my firm belief: everyone should have their own home source of living and dead water. Only then will humanity get rid of its small and big ailments, and finally find happiness. After all, it is health that constitutes the true happiness of a person. Those who disagree with this have not yet been ill. But even for him it will be useful to know what devices mankind has already created in order to heal all suffering with living water.

Is it worth reinventing the wheel

Our people emerged from the stagnant Soviet times, and the concept of scarcity has become firmly embedded in the genetic memory of several generations. That is why, having learned about the amazing medicinal properties of activated water, people began to "clandestine" work on the manufacture of devices - electrolyzers.

Of course, there is nothing special about building with my own hands blowtorch or Wall Light- cheap and useful for the home. What else to do if you can't get it in the store? Moreover, folk craft has always been in price. After all, the device can be decorated with different curls and generally give the product, so to speak, a national flavor. Let it stand and pleases the soul.

So the same confusion happened with water devices, all and sundry rushed to invent them, and the need, as you know, is cunning for inventions. Everywhere people began to electrify the water, so much so that in villages in every house steam poured from a pipe in hot weather, and in the city already glass broke. The device was supposed to be investigated. But some craftsmen managed to achieve "unsurpassed perfection". There was water from the device, but no one checked the quality and properties of this water. Although people drank it, were treated, and it seems that no one died.

Well, jokes are jokes, but I want to make one conclusion. The manufacture of such a complex installation as an activated water electrolyser is the work of professionals. That is why they received education and gained experience, and the device passed tests and now has a certificate. By the way, the latter is a prerequisite for purchasing a device in a store. And it is better not to buy it from home craftsmen. It is not known what kind of outlet water will be obtained. Maybe not activated at all, but vice versa.

What devices are sold in stores

How to choose exactly the device that you need, because there are many manufacturers of such devices now, and the devices themselves have different characteristics - try it, figure it out!

Household electrolyzers are produced in Russia, Korea, Europe and America. Foreign devices, most often, are multifunctional. They both purify water from harmful impurities, and saturate it with various useful substances... But there are special instructions for such devices. And all my recommendations for the treatment of diseases require ordinary ionized water, without any additives.

Primordial living and dead water is the best healer, especially in combination with herbal medicine. You have already been able to see this by reading the chapters, parts devoted to the properties of water and the study of its phenomenon. In addition, foreign devices are too expensive and not everyone can afford it. But on the other hand, they can install them in the kitchen and purify and ionize all the water flowing from the faucet. Such devices are called flow-through.

There are devices in which platinum plates are installed to protect the electrodes. These plates provide extra purity to the water, which, moreover, is passed through several filters.

There are also completely new types of devices in which water is ionized not by electricity, but by special minerals that create a negative and positive redox potential. These are installations that copy the natural mechanism of water ionization, which was once discovered in mountain springs. Water in such devices also undergoes multi-stage purification, purification and disinfection.

You can prepare a device using minerals yourself if you find these special minerals, which are prototypes of the anode and cathode and have the ability to easily give or receive electrons. The Germans call these minerals pearls. If you are lucky and you purchase these stones, then just put the container with minerals in the water and wait for the water to acquire positive and negative charges.

Our domestic devices for the production of ionized water differ from each other in the range of redox potential, methods of regulating acidity and some conveniences, such as automatic shutdown, the presence of a timer, as well as the ability to enrich water with various useful additives, in particular, silver. Among those functions that are worth paying attention to, I will name the ability to remove chlorine, heavy metals and organic impurities from tap water. And useful, but not necessary, installation options - built-in controller, display, sound signal... Consider also whether it is worth overpaying for a design, which is also expensive today, but the devices look beautiful and compact.

Which device to choose

My books are aimed at a wide audience, but as a rule, they are read by ordinary people who are looking for benefits, not excesses. To be honest, I myself am not a supporter of "fancy" products. Simplicity is more to my liking. Therefore, I recommend choosing a device that is simple and reliable. Remember that the most important function of an electrolyser is to ionize water, that is, to give it negative and positive potentials. It is good if the device has an additional degree of water purification, because the quality of tap water leaves much to be desired. And don't forget to turn your attention to basic amenities. After all, you must not only turn on the device, but also do not forget to turn it off in time. Therefore, the timer on the device will be very useful.

And finally, the last thing without which you cannot buy any medical device is its certificate. The presence of this document confirms that the device has passed the tests and will only provide you with useful medicinal water.

Rules for the use of activated water

Catholyte, or living water, prepared is prepared in the device, and retains its properties for two days if it is stored in a sealed container and in a dark place.

Anolyte, or dead water, retains its properties for a long time. It can be stored in a sealed glass container for many months. But it is better to use this solution in the first days after preparation.

In many of the recipes below, it is recommended to warm up the activated water before use. Care should be taken in this case too. The water must be heated over low heat, preferably in enamel or in ceramic dishes(but not on the electric stove!). In this case, in no case should the water be brought to a boil, otherwise the water will lose its useful properties.

If the recipe says to take dead and living water in turn, then remember that there must be a time pause of at least 1.5 hours between doses, and if applied topically, at least 10 minutes. This is due to the fact that when living and dead water are mixed, mutual neutralization occurs. As a result, the resulting water loses its activity.

The effect of dead water can be enhanced by using inhalation, especially for the treatment of throat and nose with influenza and acute respiratory infections, as well as for their prevention.

When treating a cold, you can use the electrophoresis method. To do this, it is necessary to wrap two thin electrodes (anodes) with gauze, having previously moistened the gauze with dead water, and insert them into the nose. And press the cathode to the moistened back of the head. Of course, care must be taken and the source voltage should not exceed 3-4.5 volts.

Activated water enhances curative action some drugs, but it all depends on the state of their acidity of these drugs. In some cases, alkaline water is effective - anolyte, in others - catholyte. If you are not sure that water will help enhance the pharmaceutical effect (this is usually indicated in prescriptions or on packages), then it is better not to drink tablets with it. Of course, activated water will not bring significant harm to your health, but it can neutralize the effect of the pill. And this is undesirable, since you have decided to be treated with medicines. But my advice: try the water first (unless, of course, you feel too bad and the doctor insists on hospitalization). After the first intake of the miraculous water, you will feel relief. But don't stop there. Prepare water and drink it.

So, be careful with the pills, trying not to drink them with activated water, unless there are special instructions. Herbal preparations are another matter. Feel free to drink them with live water - you can't go wrong. Water will strengthen and help and strengthen their action. But the dosages should still be observed.

When taken internally, activated water, a single average adult dose is usually 1/2 cup (unless otherwise indicated in the recipe). For children aged 2 to 5 years, this dose is a quarter of a glass, from 5 to 12 years old - a third, and for older children, the dosage can be applied as for an adult.

To achieve maximum effect in a number of procedures, you need to do them as long as possible. For example, a glass of water needs to be rinsed out in 8-10 minutes. How many times a day to gargle? It depends on the disease and its degree of neglect. I would recommend three to ten times.

Unless otherwise specified in the recipe, activated water should be taken internally 0.5 hours before meals. or 2-2.5 hours after eating. Also, it is advisable not to consume fatty and spicy foods during the treatment period, of course, not to consume alcoholic beverages.

For the best effect when applied externally (for example, when treating the skin of the face), the skin must first be degreased (washed with soap, or wiped with a swab dipped in an alcoholic solution of salicylic acid).

When using activated water, remember that this is not an artificial, but a natural product. It does not cause allergies, but, on the contrary, treats allergic manifestations. In the worst case, (which happens quite rarely), water will not have a noticeable effect, but it will definitely give a result after some time if you continue the treatment no matter what.

WARNING DO NOT:

Activated water must not be boiled!

It cannot be stored in the refrigerator and unnecessarily, and should not be refrigerated either. This is due to a number of reasons, in particular, with the vibration of the refrigerator, with its magnetic field... Although this field is not large, its influence noticeably affects the quality of water, deteriorating its properties.