Making a picnic table with your own hands: step-by-step instructions. How to make a round or rectangular table from wood. Original and functional: how to make a table out of wood with your own hands How to quickly build a table at the dacha

Wood is the most traditional material from which a table can be made. Moreover, both high-quality raw materials and various boards, trimmings, saw cuts, even stumps are suitable for work. A little imagination and work, and with your own hands you will turn disadvantages into advantages. After all, tables can be very different: for the home, cottage, garden, coffee tables, large dining tables, very tiny ones for a gazebo, and others. Drawings, diagrams, photos, detailed descriptions will make it easy to handle.

Family lunch spot

You don't have to spend a lot of money to do something necessary and useful. If there are boards or slats of different sizes left from previous work, you can try to make a decent dining table or a small one from them with your own hands. decorative table. They will find a place in the country, in a city apartment.

Materials and tools for making a dining table

• 9 boards or bars made of poplar wood 0.35x0.35x90 cm;
• a piece of plywood 20 mm thick with parameters 140x260 cm;
• 2 poplar boards 1.8x3.5x250 cm;

• 4 beams of 70 cm each (table legs);
• 3 beams of 90 cm each (share parts of the frame);
• 4 beams of 45 cm each (transverse frame parts);

• trimming 20 mm boards of different parameters and plywood of the same density;
• self-tapping screws;
• nails;
• glue;
• stain (optional), furniture varnish.

This list can be adjusted depending on what you have.

You should also prepare:

• table saw;
• miter saw;
• electric drill;
• device for countersunk screwing of screws;
• machine for polishing wooden surfaces;
• tape measure, square;
• pencil.

The drawings simply and clearly show how the parts are connected. Please read the image carefully.

At the dacha or in the garden you can’t do without special furniture. It should be simple, reliable, stable. When making a table from boards with your own hands, do not forget to leave free space between the parts that form the tabletop. This will allow outdoor furniture serve you longer - during rain, water will not collect and stagnate on the surface, but will drain quickly.

Get ready for work

You should prepare materials and tools:

• 2 boards 85x10x2.5 cm each;
• 4 boards 168x10x2.5 cm each;
• 17 boards, 95x10x2.5 cm;
• 2 boards 1530x10x2.5 cm;
• 4 boards 75x10x2.5 cm each;
• screws, bolts, nails;
• wood glue;
• level, tape measure;
• screwdriver or drill;
• saw;
• protective gloves, glasses;
• pencil;
• stain, paint.

Consider the proposed drawings, the manufacturing sequence, and methods of fastening the elements of a wooden table.

1. The table will be assembled with your own hands after you screw on its legs. This can be done using self-tapping screws.
2. Finishing done at the discretion of the master. Treating the finished product with stain, varnish, or paint will make the wood more resistant to damaging external factors: sun, rain, wind, etc.

Small but very original table will not leave either the owners or their guests indifferent. During the day it will become a place for a cozy feast, and in the evening it will amaze you with its quaint glow. To make it, you will not need complex drawings, but only an original idea and desire.

What do you need?

• 3 boards with cracks of swamp cypress (or any other wood similar in texture);
• ready-made metal legs for the table;
• epoxy resin;
• photoluminescent paint or dry powder;
• polyurethane paint;
• adhesive tape;
• wood glue;
• grinding machine;
• glazing beads;
• clamps;
• wood glue.

A new, hand-made table will delight you with its exotic beauty.

The kitchen table is the same age as the kitchen itself. Probably even older than this: in the sites and settlements of primitive people, large flat stones were found near the hearths, which served as cutting, distribution and dining tables; they contained remains of food and food. In this article we will look at how to make a kitchen table with your own hands completely at home. This will not only allow you to save a certain amount (in general, not ruinous), but will also provide an opportunity to acquire initial carpentry skills, which may turn out to be much more significant in the future. The most common types of furniture joints are used in kitchen tables, but its design forgives rather serious flaws in work. There are also great-looking types of kitchen tables, for the manufacture of which it is enough to be able to saw off a piece of board and tighten a screw.

A table in the kitchen also provides considerable opportunities for creative self-expression: much less skill is needed here than imagination, and failure will not ruin the entire interior. The samples of original kitchen tables in the photo below are quite accessible for making with your own hands, but first you need to get a feel for the design and material at a basic level, which is what we will try to help the reader with.

There are at least 15 different ways to make a kitchen table, including artistic forging and casting from homemade artificial marble. However, firstly, we will limit ourselves to kitchen tables made of wood, as a material that allows us to obtain the desired result with the least amount of labor, money and time.

Secondly, we will deal with tables with rectangular or rounded corners. A round table requires 1.6-2.2 times more usable area than rectangular for the same number of eaters. Moreover, the first meaning refers to the case when the hostess is deprived of a free approach to him and must be served over the shoulder of the person sitting. This already falls into the category of parodies of the rules of good manners. Like, how should you tilt the plate when finishing the soup: towards you or away from you? Answer: depending on what you want to pour on yourself or the tablecloth. In addition, a round table in a small kitchen is stronger than a rectangular table of the same capacity and is wedged into the so-called. functionality triangle, see below.

Dimensions and ergonomics

The height of the kitchen table is normal, 700-780 mm, counting from the floor to the top surface of the tabletop. For people of average height, the optimal table height is 750-760 mm. But with the dimensions of the kitchen table in plan, the situation is more complicated.

The essence is in the same triangle of functionality: refrigerator-sink-stove. Ideally, it should be rectangular isosceles with legs of 1.2-1.6 m each. However, the ergonomics of the kitchen are spoiled much more than a slight deviation from these proportions by wedging dining area to the hypotenuse. Simply: the hostess bent over the sink or stove and pressed her seductive forms against her husband’s cheek just when he brought the spoon to his mouth. Therefore, it is advisable to make the table in the kitchen, especially of economical layouts, smaller, as long as it is comfortable for the eaters.

The minimum acceptable dimensions of a family kitchen table in plan are considered to be 600x900 mm. For single people, let's say a table is 450x750 mm, like in railway cars. In this case, in a “micro-kitchen” or kitchen area of ​​a small-sized one-room apartment, it is also permissible to make it a wall-mounted folding one, see below. But the optimal dimensions of a kitchen table top are considered to be (650-800) x (1100-1400) mm, depending on the available usable area and the size of the users.

Which one to do

Traditional kitchen table - on the base, pos. 1 in Fig. The underframe is the supporting frame of their boards placed on edge - the tsar. The drawers can be tightly fastened to the table legs, and the tabletop can be placed loosely on them; those. its fastenings only prevent horizontal displacement. This kitchen-sized table is simpler in design and stronger, but it is more difficult to bring in/take out, especially if the passage to the kitchen is narrow. The second option is that the drawers are tightly fastened to the tabletop, and the legs are detachable. In this case, the tabletop needs to be durable and not made of anything suitable for use. case, the material, and the design is more complicated. But there are no problems with bringing in/out. Both of these options for a classic kitchen table will be discussed in more detail below.

The table on the base can also be artistically designed, pos. 2. Making an artistic kitchen table is not as difficult as it might seem. The basis of its design - turned shaped legs - can be easily obtained from commercially available railing balusters (see below). For a novice craftsman who knows how to use a jigsaw, a figured sawed-off drawer does not pose a problem. What remains is a molding - a shaped chamfer on the lower edges of the drawers. For this, you can rent a manual milling machine with a cutter of the profile you like; with it, the work itself on setting up the molding takes less than an hour, plus 10-15 minutes of training on some kind of trim.

No less common in kitchens are tables of beam construction, pos. 3. Even in their simplest design (see 2 options below) they are more attractive than tables with a base. However, to complete them in a high-end design (item 4) requires well-equipped carpentry and solid manufacturing skills. Beam tables require more material, but their undeniable advantage is that they can be made completely collapsible without tools (also see below).

Tables with a load-bearing tabletop without an underframe (item 5) are also very often found in kitchens. In a factory-made version, this is perhaps the cheapest type of good quality kitchen tables. A set of legs for such a table + a postforming tabletop (see below) will cost about 2,500 rubles, and assembly will take at most half an evening. But when making such a table completely independently, a beginner will encounter some significant nuances, see below.

Tables-books, they are also tables-pedestals, pos. 6, initially created a sensation due to its compactness when folded and the ability to be used in a half-fold version, but then there was a period of some disappointment. Firstly, no matter how you sit at such a table, your legs feel uncomfortable. Secondly, in the first samples, the rotary support lock was the simplest, consisting of a pair of 50x20 bars, attached with a gap equal to the thickness of the support to the underside of the tabletop. The outer faces of the bars were often removed with a wedge so that the support would not cling to them when unfolding the table. However, if you accidentally pry the tabletop with your knee, the lock is immediately released. Therefore, such tables could not do without a hodgepodge of cutlets and mashed potatoes on the trousers and the floor, and a reliable and easy-to-use mechanical lock turned out to be very complex and expensive. Nevertheless, both amateur craftsmen and serious manufacturers are improving this, in principle, very promising design, which will be the subject of a special section in this publication.

Wall-mounted folding tables (item 7) are rarely found in very tiny kitchenettes. Most often - among busy bachelors who are used to doing everything while standing, even sleeping on the carpet in front of their bosses, because... have all the disadvantages of book-tables with virtually no room for improvement. Serving tables (item 8) are used much more often on the farm, but this is a separate class of furniture with its own specific qualities and manufacturing technology, so here we will limit ourselves to just mentioning them.

Technological subtleties and innovations

The kitchen table, firstly, is made from wood species or materials that are little or not subject to shrinkage when dried: oak, hornbeam, wenge, laminated chipboard, MDF. Ordinary industrial wood in a kitchen atmosphere with its fluctuations in temperature, humidity and organic vapors in the air begins to warp and crack after 5-7 years, even if impregnated and varnished. On the other hand, the dimensions of the kitchen table are small. This leads to some features of its manufacture, which ultimately make it possible to simplify the work.

Tabletop

This is the main detail of any table. For a homemade kitchen table, the best option is to buy a ready-made postforming tabletop; they are available in a wide range of colors, textures and sizes. Postforming is a profiled laminated chipboard with rounded edges, finished to look like wood or other material. The advantages of postforming in relation to a kitchen table are as follows:

Postforming is good technologically for simplicity and speed of work. But countertops made from boards, the so-called, look much more solid. solid wood or furniture panels. Joining boards into an array is quite delicate and painstaking work; for this purpose, special devices are used - clamps. If you want to try your hand at making furniture from solid wood, we offer a selection of videos:

How to assemble a furniture panel with your own hands:

How to make a panel top for a kitchen table:

How to make a tabletop from wood end cuts:

In the last video, the material is junk, but you can achieve the look - cool oligarchs will salivate.

Dowels, confirmations and dowels

Traditionally wooden furniture going on the dowels. The dowel connection is invisible and cheap; Just in case, let us remind you what it is and how it is done, see fig. To connect wooden parts, wooden dowels are used, which dry out along with the connected parts; The laminated chipboard, which practically does not dry out, is connected with plastic dowels. Corner plastic dowels are rarely used, because... often break down. Connections wooden dowels, as a rule, are glued.

It is often difficult for novice craftsmen to achieve accurate markings for the dowel connection. Tricks, such as marking with bitten nails (item 4 in the figure), do not always help, and it is impossible to remake an incorrectly marked dowel connection; both parts go to waste. Therefore, it is better for beginners to assemble their first products using Euro-furniture screws - confirmed ones. This is more expensive, but does not require special skills, because... the confirmation hole in both parts, compressed with a clamp, is drilled in one go, see fig.

Parts made of laminated chipboard or dense thin-layer wood, connected with confirmats, last for many years. All the designs described below can be assembled both on dowels and on confirmations. However, in the latter case, the following rules must be observed:

• Use furniture grades for wood, not plumbing grades for plastic. They differ at first glance: furniture slots have a hexagon slot, and plumbing slots have a Phillips screwdriver.
• The diameter of the body of the confirmat without thread when attached to the end should be no more than 1/5-1/3 (as an extreme case) of the thickness of the attached part.
• The height of the confirmation neck should correspond to the thickness of the main part.
• The penetration of the threaded part of the confirmat into the attached part must be at least 5-6 full diameters of the confirmat.
• The hole (blind hole) for the confirmat is drilled to its full length with the head.
• Use only a twist drill for wood.
• The main drill must be inserted into a mandrel that exactly matches its diameter and screw size.
• Drill holes for confirmations with a main drill of a diameter equal to the diameter of the confirmation by thread.

In practice, it is not difficult for even a perfect “teapot” to fulfill these conditions:

1. Based on the thickness of the part, we determine the diameter of the body of the confirmat without thread;
2. There is a lot of information on confirmatories on the Internet, from which you can, knowing the diameter of the screw body, the thickness of the main part and the drilling depth, determine the required standard size. It’s better to immediately open pictures for the request “furniture screw (or confirmation) drawings dimensions”;
3. We are looking for a retail outlet where the seller, when asked to show furniture confirmations, shows them exactly;
4. We say: “I need so many of such and such a standard size and a drill with a mandrel for them.” They may offer a solid drill just for this confirmation, it will be cheaper.

And a little more about dowels. It is best to place a detachable (freely applied) tabletop of a classic kitchen table on them. Incl. and for such purposes, plastic dowels with a round head or dowels with a cap and different types grooves on the long recessed and short protruding parts, see fig. on right. Thick tabletops are attached first, approx. from 20 mm; the second ones are thinner.

Various tables

Classic

Classic tables on the underframe along with the legs (item 1 in the figure) are traditionally connected (assembled) using tongue-and-groove joints, which is quite complex and labor-intensive. A modern tool - a drill with a twist drill for wood and a screwdriver - in combination with legs, the section of the heads of which is not less than 60x60 mm (for balusters the heads are usually from 100x100 mm), allows for a kitchen table with plan dimensions of up to approx. 750x1500 mm can be made by connecting with wood screws at an angle, pos. 3. In any case, the outer sides of the drawers should be 1.5 cm away from the outer surfaces of the heads of the legs, this is necessary for overall strength. The minimum permissible height of the kitchen table drawers is 120 mm; thickness – 30 mm.

It is highly advisable to reinforce the connection with oblique screws with diagonal ties in the corners (item 4, above) from the same board as the drawers. If the tabletop is not intended to be removed unless absolutely necessary, then the labor-intensive installation of it on dowels can be abandoned. Then, at the corners of the finished supporting frame, scraps of the same board - crackers - are cut into the drawers and the tabletop is attached to them from the bottom with self-tapping screws, pos. 4 below.

The tabletop of a classic table with detachable legs should be at least 24 mm thick (chipboard, plywood) or 30 mm thick (solid wood). Countertops made from other materials, e.g. artificial stone, suitable for tables on the base along with the legs, are not applicable here. Due to big difference their thermal expansion modules and the wood of the table will soon become loose.

Next, the drawers are attached to the tabletop with long confirmations right through the end, on the left in the figure, with sizing with wood glue or PVA. It is difficult to achieve accurate assembly using ordinary wood screws, because... they are without a neck to keep the joint from moving.

The next point is that jibs in the corners (also in the figure) are required, wooden mortise ones or ready-made steel overhead ones. The legs at the corners are attached in the usual ways, on the right in Fig.

Desk drawer

A drawer is a classic structural module of a classic kitchen table. The guides for the table drawer are the same as for the drawers of the bedside table, chest of drawers, and closet. Since a large weight load is not expected in this case, but the smooth movement of the drawer and the possibility of its full extension of great importance If they don’t, you can use inexpensive roller guides on which keyboard boards on computer desks run.

Device furniture box shown on the left in Fig. It is not necessary to assemble its tray the old fashioned way on a box tenon (on the right in the figure); you can use self-tapping screws into the ends of the boards. The thickness of the boards for the drawer sides is 12-20 mm. The plywood bottom is often fastened with a furniture stapler, but this is not entirely reliable. It is better to attach it with self-tapping screws through the cranial bars along the contour of the bottom. The front of the drawer can overlap the front side of the table or fit flush into it, it doesn’t matter.

To install the drawer in the table, an opening is cut to size in the longitudinal front drawer cross section drawer tray, plus allowances on the sides for the guides (indicated in the specifications for them), plus another 3 mm along the contour. Then the side support boards are installed to secure the guides. They are attached to the longitudinal frames from the inside using backing bars. There is no need to fasten it to the tabletop; it will become loose. Next, the box is assembled, attached to it and to the supporting boards, respectively. the guide parts push the drawer into place, that's all.

Quite simple

A completely simple but good-looking kitchen table with a classic look can be made on a supporting frame made of boards, see fig. on right. Its length, if the drawer section is at least 120x20 mm, can be increased to 1100 mm. Tabletop – any weight up to 15 kg. The angle of inclination of the legs from the vertical is 15-20 degrees, this is one fundamental point in this design. The second is transverse ties made of 50x15 timber, they give the entire structure the necessary rigidity. So, although this table looks classic, in fact it is already a beam table.

Beam

Drawings of a pair of kitchen tables with a beam structure are given in Fig. Above - completely collapsible without tools. The tabletop is structurally any, placed on dowels, although the style of this table (rustic) is fully consistent only with a tabletop made of solid wood. A variant of its fastening from the underside without dowels on cranial bars is shown in the inset in the center on the right.

In this product, a beginner may find the bottom bandage (longitudinal tie) with a beveled through groove for the wedge to be a stumbling block. In fact, everything is very simple: the bottom bandage is assembled with glue from 3 layers of 10 mm plywood or boards. How to make beamed kitchen tables of this type, you can watch the following video:

Video: DIY table by components

Without table support

Factory-made kitchen tables without bases are usually produced with postforming countertops, pos. 1 in Fig. Those who want to make something similar on their own wooden table top will face the following tricks.

First, a table stand is still needed, because wooden beam from 50x50, pos. 2. The fact is that mechanical stress in boards always flows to the corners, where they are distributed very unevenly. But the wood under all 3 fastening points of the leg frame must be tensioned approximately equally, otherwise the fastening will loosen on its own. Timber piping expands the fan of stress in a given place to an acceptable value, but it is impossible to replace continuous piping with corner pads; they will be of no use.

The second is the material of the countertop. The standard threaded sockets for mounting the leg clips (item 3) are designed for laminated chipboard or dense, fine-grained wood. If the tabletop is made of pine, etc. layered rather soft wood, then the nests can, having torn the layers, crawl back out already during the installation of the clips. And the probability that this will happen when someone accidentally pushes the table is close to 100%

And the third is the leg clips themselves. In cheap sets of parts for tables without tabletops from “alternative” manufacturers, they are most often made of silumin, pos. 4. And silumin, as you know, is very, very fragile. In general, if you like such tables, it will be easier to buy a ready-made one with a guarantee. Most likely, and cheaper than assembling a kit for self-assembly at retail.

Books and Cheburashkas

The disadvantages of the table-book of the original design (see figure on the right) have already been mentioned above. In Fig. Below is a drawing of the design of a table-book (conventionally, only one rotary support is shown without the wings of the tabletop), which eliminates them in an amateurish, but effective manner. Simply, the width of the rotary support is reduced by more than half compared to the wing span of the tabletop (350 and 720 mm, respectively). Now the support rotates 90 degrees, so you can sit comfortably as you wish. The support, located in the working position along the longitudinal axis of the tabletop, holds it even better than an oblique one, and in order to lift the tabletop to the exit top bar the supports are made from a simple clamp (see above), your knees need to be raised so that it will be very uncomfortable for you. Overall stability is ensured by the legs of the cabinet section, which must be made as long as possible, but not less than 600 mm. Otherwise, the swivel supports must be brought down in height to the floor level.

Fundamentally similar solution also used in the wall-mounted folding table (items 1 and 2 in the next figure), but here the bevel of the hanging corner of the support contributes to operational reliability. Which is quite applicable in the previous one. case: there are no contraindications for performing that support in the form of a trapezoid converging downward.

A proprietary solution to the problems of a book-table is removable legs stored in the cabinet. Placing them is not much more troublesome than catching the latch on the tabletop with a rotating support. Such a table-book is, of course, more expensive, but its operational reliability is complete: there is no latch, because it's simply not needed.

The next step in the evolution of the book-table is a design with a larger cabinet and one leg on each wing of the tabletop. There are half as many legs, which means the whole table is cheaper. Its stability has only increased due to the expansion of the cabinet, it is generally comfortable to sit, and there is more space in the cabinet (which is always in short supply in the kitchen).

Consumers liked such kitchen tables so much that they were already given the nickname - Cheburashka table. Probably, remembering from the cartoon: “Here, we built, built, and finally built it.” A folding kitchen table as it should be.

Alternative

If your kitchen is combined with the living room or you plan to combine them, then think about kitchen table and it’s not necessary, it’s better to replace it on the column. You can not only drink at the bar counter, you can also eat there. The point of such a replacement is that at least half of the dining area goes beyond the kitchen, and the rest is used sporadically and does not wedge itself into the functional triangle. Result? See fig. It is more convenient to work and dine in a 5-meter kitchenette with a bar counter, which separates the apartment zones, than in an 8-9-meter Brezhnevka kitchen. Don't believe it? Let's do the math.

The kitchen table does not stand on its own. To plant the eaters, you need to add 400 mm along the contour, and another 300-350 for the approach. As a result, a 900x600 mm table requires approx. 2.5 sq. m of “living space”, and the table is 1200x700 mm and all 3.5 sq. m. It is very, very difficult to push such a thick piece into a kitchen of normal size without crushing the soft-boiled functional triangle. Here, even if two people sit at the counter from the kitchen side, the functional triangle is not disturbed, and the hostess is within easy reach of everything.

One of the famous culinary experts once said: “The kitchen is conservative, like the digestive tract.” Here, of course, he bent and overdid it. Something like a stove, refrigerator, food processor and microwave is not found in our stomachs, although the kitchen is really conservative. But even in the most conservative sphere, there comes a time when a moment requires fundamental changes.

The table - an integral attribute of every home - can be made of different materials, have a simple and intricate form and carry out different functions, but it is completely impossible to do without it. Not everyone understands why make a table with your own hands, if such an ordinary item can be easily bought at any furniture store. Indeed, not everyone dares to make furniture with their own hands.

But the daredevil who thoughtfully gets down to business will certainly enjoy the process and the excellent result of his labors. Some come to this wanting to save money, especially if they need something simple. Others, obeying a creative impulse, want to have a unique piece of furniture in their home that will improve their mood and self-esteem. In addition, a table created with your own hands always has ideal proportions and matches the interior style of your particular home.

Product shape and design

A wooden table is an environmentally friendly, aesthetic and durable product that will fit well into both an apartment and a country house. Moreover, there are options for special garden tables. It can be light, portable, or solid and massive, have different models and forms:

• Angular;
• Oval;
• "Book";
• Folding;
• Sliding;
• Transformer.

Transformers is perhaps the most interesting category tables. When folded, they are very compact and look like a small bedside table. If you put it against the wall, it will take no more than half a meter. A table of this shape is indispensable in conditions of limited space, when it is not possible to hold a large dining table for a dozen people. Hinged tabletop covers are attached using a hinge system. Transformers are usually rectangular, but there are also round models.

Before you get started, decide what configuration and size you need. Below are general recommendations professionals:

• A handmade table must match the room for which it is created, both in size and style;
• When creating an outdoor option, it is important to think in advance how many people will use it at one time;
• Folding table– an excellent option for hospitable hosts. This product will be used assembled for family dinners and will be a godsend when receiving guests;
• For a comfortable feast, the space at the table allocated for each guest must be at least 70 cm;
• The children's model should be designed in accordance with the age and height of the child.

Manufacturing will cost some effort and time, but the result will please you. After all, a product created with my own hands, will be inexpensive and fully consistent with your ideas and desires. If you wish, you can make an entire furniture set, but this will require special skills and dexterity.

Before you start making a table, you should carefully read the drawing so as not to waste materials.

Tables can be divided into the following design types:

• Made from solid wood;
• Prefabricated (from terraced, tongue-and-groove, unedged boards);
• Glued;
• Made in the form of a “shield” of lamellas.

Furniture made from solid wood is considered elite and has a fairly high cost. The remaining options are simpler and can be used either in pure form or in combination. Glued tabletops made from boards of different types of wood, made with epoxy - this is a resin-based adhesive composition - look very nice. Natural wood patterns and different textures create an incredible effect. Products made using this technology very durable and resistant to deformation.

Material selection

The most popular material for making tables and other garden furniture is wood. This is easily explained, because wood has a number of significant advantages over other materials, such as metal or concrete. The tree has the following advantages:

• Ease of processing;
• High aesthetics;
• Resistance to different climatic conditions;
• High depreciation;
• Possibility of restoration;
• Wide possibilities in the field of processing and painting;
• Safety for human health;
• Low cost of certain categories of wood;
• The beauty of natural patterns.

Natural wood is a material with a beautiful natural texture, quite inexpensive, environmentally friendly and durable. It is moisture resistant if specially processed, malleable for carpentry tools, and therefore excellent for making home furniture and utensils.

Appearance The finished product and its characteristics will depend on the type of material and its preparation, so it’s worth starting with the selection of wood. Each type of wood has its own hardness. The most popular tree species can be identified:

• Spruce, pine and cedar are softwoods. An easy-to-process material, but prone to deformation, drying out and cracking;

• Oak, beech, larch and birch are representatives of hardwood. Beautiful and noble types of wood. Moisture resistant and durable. Power tools will be required to process oak and other hardwood products;

• Superhard materials - yew, hornbeam and acacia - have extremely dense internal structure, are a high-strength material. Requires professional industrial processing.

To make a wooden table you will need edged board or timber. A table made from slabs will have a brutal look and will fit perfectly into a hunting-style country house. A wide slab can serve as material for an entire tabletop. Another material for creating a tabletop is a cut from a trunk. First, a trunk of the required diameter is selected, then an even cut is made and varnished. This technology generates a large amount of waste.

The durability of the product depends not only on the wood processing, but also on the choice of wood species. Hardwoods are not always a good choice. Under conditions of temperature changes and high humidity, the tree swells and crumbles. The best option for a street or country tabletop is elastic wood. Characteristics such as hardness and elasticity provide resistance to deformation. Spruce, aspen, larch and linden boast such properties.

Before starting carpentry work, the wood must be sanded and treated with an antiseptic, and finally it will need varnishing. In addition, stain will give the product a finished look.

Preparing tools

If you are inspired by new ideas and decide to make wooden table with your own hands, You will need to prepare the following tools for work:

• Reismus;
• Saw;
• Jigsaw;
• Hacksaw;
• Jointer;
• Milling cutter;
• Screwdriver;
• Drill;
• Grinding device;
• Clamps;
• Pencil,
• Roulette,
• Square.

In order for the work to proceed, consider the shape and size of the product, prepare drawings. The size of the product will depend on the area allocated for it, and the average height is 70 cm. Here is a list of materials needed for work:

• Antiseptic;
• Sandpaper of varying degrees of grain;
• Boards;
• Beam or slab;
• Paint and stain;
• Glue.

For a standard family of four people the table is suitable square shape with a side width equal to one meter. The size of 120 by 90 cm will accommodate both owners and guests.

Construction of a drawing

The drawing is a diagram that clearly describes the sequence of actions, following which the expected result is guaranteed. If a unique design is conceived, then you will have to work on the diagram and drawings yourself. To do this, you can use a computer program, then print out the resulting documents so that you have a visual guide.

Manufacturing of parts

The step-by-step process of making a wooden tabletop can be described as follows:

• Select the required amount of materials. For a standard width you will need 6-7 boards 3 cm thick. Only perfectly flat, jointed boards are suitable. Knots are not a hindrance.
• Treat the wood with antiseptic treatment and dry thoroughly.
• Lay out the boards in the shape of an even rectangle. Align the joints.
• Place a block on both sides and cut straight.

• Screw the timber to the boards. On the back of the tabletop, in the center of the boards on each side, drill a hole for the bolt through the block 2/3 of the way through. Make the recess on the beam wider so that the head of the bolt sinks.
• Round the corners.
• Attach the board diagonally from the bottom with self-tapping screws coated with glue.
• Sand the surface first with coarse sandpaper, then with softer sandpaper.
• Cover the product with stain and varnish. If desired, the table can be painted.

Homemade table top made of laminated wood

Tables made of this material have a smooth and uniform structure, without joints or crevices. Another argument in favor of this technology will be its resistance to deformation and cracking. To make a table, you will need 4 boards with smoothly planed edges, having the following parameters - 1x1.5x0.5 m. The operating algorithm is as follows:

• At the ends, at a distance of 10-12 cm, make holes measuring 8-12 mm. They are needed for attaching dowels and dowels. Holes in the two side boards are made on one side only.
• Fold the boards correctly before applying glue.
• Sand the boards and coat them with glue.
• Insert dowels and fasten the boards.
• Align the ends and make sure each board is in the correct position.
• Place the finished tabletop on a flat surface and press tightly with a clamp.
• Leave to dry.

Making a round table

To bring to life the idea of ​​​​creating a round table with your own hands, you need to have the following materials:

• Square timber (width – 100 mm, length 750 mm – 4 pcs;
• Boards 100 by 20 mm, length 750 mm – 2 pcs;
• Boards 250 by 40 mm, length 2000 mm – 4 pcs;
• Boards 100 by 20 mm, length 800 mm – 2 pcs;
• Boards 100 by 20 mm, length 1600 mm – 2 pcs.

Step-by-step instructions for creating a handmade round table:

• Stack four long boards tightly together.
• Draw a circle.
• Cut along the line with a jigsaw.
• Make a rectangular frame and fasten the circle with screws.

• Attach the legs to the frame.
• Check stability and then disassemble.
• Sand the wood with sandpaper. First hard, then soft.
• Cover with stain and varnish.

At first glance, it seems that the most important detail of the table is the tabletop. However, do not underestimate the legs of the product. After all, they are the ones who decorate the table and give it a certain style. The legs must correspond to the basic style of the model and the necessary parameters.

The paradox is that the more complex and elaborate the table legs are, the less they will last. The most reliable will be simple wooden, stable and lightweight supports. You don't have to make drawings for them. Stages of making table legs:

• Selection of four equal length (85 cm) bars;
• Installation of bars at the corners of the tabletop;
• Connection on each side with boards or beams: two equal in length, and two equal in width;
• This design is glued to the table and left to dry.

The table does not always have standard four legs; sometimes craftsmen resort to creating a table base from a frame and one or two legs. Glue can be replaced with furniture corners, which are fastened with self-tapping screws, or for reliability, use both options. You can create an unusual fantasy model by evenly attaching the tabletop to ornate and fancy wood roots. This will be a stunning piece that only you will have.

Assembly Features

Holes are drilled in each element of the product, then the parts are connected with bolts, which makes the product truly durable. You can enhance the effect using fixed with good glue. Self-tapping screws are screwed in from the inside at an acute angle relative to the board. If the finished product is noticeably wobbly, use special belts with clamps. This will help make the structure more reliable and stable.

For the legs are taken wooden blocks, which must be processed with a planer in the shape of a cone. Carved balusters, which you can either buy or carve yourself, are also great for this. lathe. By doing the construction with your own hands, a person gains skills in working with wood, so if the need arises to repair the product, it will not cause difficulties. You will already have all the necessary arsenal of tools. In addition, you will need wood and means for restoring old wooden products.

Treatment

Getting a good and solid result is not so difficult. The main thing is to comply with everything the necessary conditions. After carrying out the main work, the time comes for the final, but no less important stage - varnishing the product. In order to carry out this operation correctly, follow the following rules:

• Sand the edges of the tabletop by hand;
• Apply a high-quality varnish to the entire product. In addition, painting some parts of the table with paint will look very decorative;
• Flaws in the work are well masked with putty that matches the color.

The most popular option for decorative finishing of a wooden table is to cover its surface with a transparent or colored varnish, which will highlight the natural wood pattern and provide its protection from the influence of external factors.

In order for a product made by hand to serve for many years, remaining the pride of the owner, It is recommended to follow simple rules:

• Avoid direct contact of the product with open sun and do not leave it outside in the rain;
• Keep the surface clean;
• Treat with polish;
• In winter, keep the table indoors so that the varnish coating is not damaged.

Before assembling each wooden part it is necessary to treat with antipyrines, which will serve as protection against rotting, increase moisture resistance and fire resistance.

Exterior decoration and design

The most enjoyable stage of making furniture with your own hands is, of course, decorative finishing, which each master performs in his own way. In order to get an original model, you need to think about the external design of the product. Sections of medium-sized trunks, decoratively laid out on the tabletop, will come to your aid. Wood carvings are also a wonderful decoration. Carved legs and table top will give the product elegance and lightness.

Many people prefer to decorate the tabletop with glass. This option is suitable if the table is located indoors. A hand-painted table is unlikely to go unnoticed by guests. This product will add a special touch to any room.

For those who are not good at drawing, the option of transferring the drawing through a stencil is suitable. This is, indeed, extremely simple, but there are some nuances: it is recommended to apply the pattern with acrylic paints, since when they harden, they form a thin film and therefore do not spread.

Allow the previous coat to dry before applying a new coat of paint. You can work with either a brush or a roller.

The frame around the edges of the tabletop always looks decent. Painting tape will help create a perfectly straight line. Cover the finished drawing with varnish. The simplest and most proven option is to play with the color of the boards. Using paint, stain and sandpaper You can create the effect of aged wood. Products of “noble antiquity” always look impressive and expensive.

The decoupage technique is simply a godsend for creating the decor of a new wooden table or restoring retro furniture. This method involves attaching a paper picture to the surface of the product using furniture varnish. The choice of design is made according to the taste of the owner. These can be images of nature and animals, rhythmic patterns, black and white graphics, and even photos from the family archive. Materials can include napkins, newspaper clippings and vintage postcards.

A new table can be easily enhanced with mosaic tiles. Today in construction stores there is a wide selection available. It is advisable to use one set of tiles so that there are no inconsistencies in height and do not create unnecessary relief, which can damage the pattern and make the table uncomfortable to use. In addition to the mosaic, you need to purchase glue and grout. Briefly, the process of creating a countertop with mosaic masonry can be described as follows:

• The surface of the countertop is degreased with alcohol;
• Then it is processed with sandpaper;
• Start laying out from the outer edges;
• Secure the elements;

• Leave to dry for a day;
• Dilute the grout to the desired consistency;
• Carefully coat the seams;
• After an hour, remove the remaining grout;
• Let the product rest for two days, then wipe with a cloth with added vegetable oil for shine.

A budget option for mosaic decor would be table decoration with eggshells. It is necessary to crush the shell into medium-sized crumbs, then place it with tweezers on the surface of the countertop, previously greased with PVA glue. Try to leave the gaps between the shells minimal. If desired, the shell can be painted.

Tabletops with decorated with gold leaf. Potal is a thin sheet of metal alloys that imitates gold. This material can be purchased at art stores. The required pattern is applied with special glue to the surface of the table; after 15 minutes, cover it with a sheet of gold leaf, carefully smoothing it out. Then you need to walk over the surface with a soft brush and admire the result.

A luminous table is an excellent design solution, and also quite simple to implement. The finished product is equipped with special lighting - small lamps or a strip with LEDs are built in, providing the most different variants backlight: from simple to colored.

Modern kitchen sets often do not include such an essential item as a dining table, and if it is included in the basic package, it is usually made according to a standard design from cheap pressed wood. Of course, such products are not famous original design and strength. Such tables are usually inexpensive, but it’s still better to abandon an unsuccessful purchase in favor of a homemade wooden dining table, which any beginner in home carpentry can create.

Physical labor associated with woodworking (sawing, planing) usually brings great pleasure to novice craftsmen, and a successful result will not be long in coming.

It is important that the activity associated with independent design and assembly of wooden models is a very creative process. It’s rare that someone tries to completely replicate a model they like from a store. Usually the design of the model is taken as a basis, and the remaining parameters are finalized by the master according to his own inspiration. On the veranda or in the country house, utility rooms It is better to choose transforming designs:

• Folding,
• Hiking;
• Hanging;
• Garden;
• Level.

Tables for stationary use are made in constant sizes:

• Coffee;
• Massage;
• Writing
• For laptop;
• For the bath.

The assembly of such products is very durable, the parts are held together tightly, and there are no hinge joints.

Tables for a garden or terrace usually have a standard rectangular or round shape. However, there are craftsmen who manage to make a rustic table in the shape of a stump, and a bench in the shape of a log, which looks very impressive. This ensemble is easily complemented by stools made from sections of logs in the same style. As you can see, making a wooden table yourself is not a difficult job.

If you follow the instructions exactly and select the right quality materials And suitable tools, you are guaranteed to get a durable and beautiful table, which will fit perfectly in terms of parameters and style into your interior.

If you have your own plot of land, then you can furnish it beautiful furniture so that it is convenient not only for gardening work, but also for relaxation with the whole family or a large company. High-quality garden accessories can be quite expensive. Thrifty owners would like to offer a scheme according to which it is quite possible to make a garden table with your own hands, in order to ultimately get strong and reliable furniture. Please read the information provided below carefully. She will help you understand how to make a table in your country house with your own hands.

1 2 3

To construct a country table with your own hands, you need to take a minimum amount of materials and tools; moreover, most of them are quite affordable and can be found in almost every home. So, what should you prepare in advance:

• material to be used as a base. Many modern masters prefer wood. The main advantage of wooden benches is that they are completely safe from an environmental point of view. In addition, their appearance is very aesthetic. To make things easier for yourself, you can take new boards. When purchasing lumber, make sure that it is sufficiently dry; wet wood should not be used for work. You need to keep it for several months in a well-ventilated room, and only then start working. If you follow this advice, then a table made of timber with your own hands, made and installed, will serve for a long time. Of course, you can make a table from stone or metal, but this will require a lot of investment and effort, time and money. Stone, as the main material, is durable and reliable, however, it is much more difficult to process;
• fastening elements (nails and screws);
• drawings of garden benches and a table for a summer house with the indicated proportions. You can find ready-made options or create furniture diagrams yourself. Choose a project or make an original layout based on the options presented on our website. If you are planning to create a high-quality and aesthetically pleasing table at your dacha with your own hands, then the drawings will definitely be useful to you;

1 2 3
4 5 6

• sandpaper. If you have a grinding machine, this will significantly speed up the work process and help make the garden table perfectly smooth;
• varnishes and antiseptics for wood processing. They are needed so that a table made of boards can be used for a long time. If you use the products presented according to the instructions, you will receive a wooden outdoor furniture piece that will not lose its functionality due to moisture or insects.

How to make a table for a garden?

1 2 3 4

If you are planning to design a wooden table for your dacha with your own hands, then you can suggest the following course of action:

1. Cut the boards 140 cm long and make a frame out of them, fastening the individual elements with self-tapping screws. Make sure that the boards are positioned at right angles to each other. In order to check the correctness, measure the diagonals: if there was no error, then they should be completely identical. The finished frame is needed to ensure the strength and reliability of the entire structure.
2. If you are planning to create a round table, then make legs. To do this, cut 4 boards 80 cm long and sand them with a sander to give them an aesthetic appearance. Chamfer the ribs using a suitable tool. Attach the workpieces to the frame with inside. For each leg, select 4 fasteners to ensure the most secure connection.
3. Attach the crossbars to the middle of the legs. They will act as a frame for a shelf, which can be used for its intended purpose for arranging some things or dishes. On the other hand, this detail will make the furniture more rigid. Fix the crossbars at an angle of 90º. To avoid making mistakes, check the accuracy with a square.
4. Place the base on flat surface, check how stable it is. If the structure does not wobble and you have no doubt about its reliability, bring the surfaces into proper condition by grinding. For this type of work, it is recommended to use sandpaper or a special machine. Using the device will help simplify the task and complete the task faster.
5. Assemble the tabletop. To create it, it is recommended to use boards of various types of wood. If you plan to design a round table, then you will need to cut out the tabletop suitable sizes from a solid wood plate. This will allow you to create a table with your own hands that will look stylish and unconventional. Treat the material with stain in advance. Secure the boards with nails, and secure the shelf with self-tapping screws. Level the surface with a special machine and apply paint to it (alternatively, you can use clear varnish). You can significantly simplify your work if you purchase or order ready-made wooden stands. You won't have to waste any time or effort on processing it.
6. Place the prepared tabletop on the frame and fasten the individual elements. A metal corner is suitable for these purposes. the best way. At this point the assembly process can be considered complete.
7. As soon as the country table has been built, cover its surface with several layers of a substance with antiseptic properties, and after it is completely absorbed into the surface, with two layers of varnish. Thanks to these simple manipulations, you can make your garden table more resistant to impact. external environment. As a result, you will receive economical garden accessories that will last for a long time. for long years without losing all its presentability. You can place them in the garden without worrying about the wooden table cracking after the first rainstorm.

If you have some material left, you can use it to construct wooden benches with your own hands.

When not in use, they can be placed under a table or under an awning to extend their service life. You can decorate finished furniture based on your wishes and skills. You can decorate a homemade garden table with carvings (photos on our website will help you catch inspiration).

How to make a table from logs?

1 2 3

If you wish, you can make a table for your garden with your own hands using another type of material - logs. It is also environmentally friendly and easy to process. Using it, an outdoor table for a summer house will be created according to the following scheme:

1. Prepare the log house for further work: plan the surface of the logs using a plane, cut into separate parts, and sand with sandpaper to remove all burrs. Make the joints perfectly even, make holes, making sure that their diameter matches the diameter of the reinforcement. It is important that the individual holes are spaced 30 cm apart from each other.
2. Assemble the elements that form the log table. When connecting parts “into a bowl,” cutting should begin by filing in the center. Make sure that the cutting is exactly at the specified depth. To perform this work, it is more convenient to use a chisel or an ax.
3. There is another option for fastening parts: in the places where one part is connected to another, holes are made, and reinforcement is inserted into it. To make your own garden table more durable and reliable, use epoxy glue. All parts are folded according to the drawing. If the reinforcement is too long, it is shortened. The result is to create a split table from logs with your own hands, which is very convenient to use.

Specialists make high-quality objects from wood with their own hands, connecting individual parts with self-tapping screws. This option is also acceptable; if you are going to make a wooden table for your garden, take note of it. Benches can also be constructed from logs when you have lumber left over.

To top it off, I would like to note: in order for garden tables not to lose their attractiveness over the years, they need to be properly cared for, in particular, protected from precipitation and hidden under a canopy.

By the way, setting up the canopy itself is quite simple; just use the most primitive means at hand, for example, shower curtains. They need to be fastened together so that they form a dense canopy, under which precipitation does not penetrate. If it is not possible to arrange a shed, it is better to move the furniture into the house.

A table for a summer cottage is not just a piece of furniture, it is a ritual place where all household members invariably gather. In the summer, no one wants to go indoors to drink tea or have lunch. On fresh air and the appetite is better, and the food tastes better. In order not to carry furniture from home for gatherings, you can make an outdoor table for your dacha with your own hands, at the same time taking care of the benches.

garden table with built-in bench

A country table does not imply a complex design, so assembling it will not be a problem even for individuals far from carpentry and creative work. We will present you with several very simple and at the same time original ideas for creating it; perhaps some of what we have proposed will become a decoration for your site.

Material for country table

DIY garden table: interesting ideas

Conclusion

Photo gallery - DIY garden table:

the garden table must be durable

Outdoor furniture is subjected to serious testing, so it must be made from durable materials. Specifically for the table you can take:

1. Stone.
2. Tree.
3. Metal.
4. Available materials.

The tables from the latter look especially interesting. But first things first.

Wooden table

outdoor dining furniture set

Selecting material Special attention pay attention to the type of wood. There are different boards and boards and, in our case, not all are suitable for use. Pliable and easy to work with conifers, alas, will not fit. In addition to the fact that they need special impregnation, because they are too fire hazardous, the resin they release will spoil the tablecloth and dishes.

The necessary elements must be looked for among hardwood blanks. On the tabletop you need to assemble boards with a thickness of 30-50 mm. For added strength, they are stuffed onto a frame. The legs of the structure can be saddled straight or X-shaped. It is important to process all the details well so that there is no danger of driving a splinter while wiping the table. It is mandatory to treat the finished product with protective impregnations.

folding wooden table at the dacha with your own hands

In order to make a table “for centuries”, cover it with varnish, and do this, as they say, without sparing the brush. The composition must be literally rubbed into the wood, and this will only be possible if you slightly heat it in a water bath. Varnish coating make three layers.

Stone table

a round table and benches made of stone will last for decades

You want to do monolithic structure that amazes the imagination and creates a special mood for meals - try working with stone. You can create this type of table for your garden with your own hands or buy a finished product. Stores offer granite and marble options in wide range. There you can also select benches made of similar material to go with them.

To breathe life into an old table, all you need to do is tiling the tabletop

It will not be cheap, but if you really want to have such a luxury in the garden as a stone table, try to make it cheaper. Lay out the bases of the benches and table yourself. This will work quite well for this:

1. Flagstone.
2. Brick.
3. Modern blocks.
4. An ordinary cobblestone.

table made of stump, lined with stone

It will be much easier to fit these materials into the overall concept of the garden and combine them with existing buildings. It is quite possible to use artificial stone for the tabletop, seats and backrests. The composition will not lose its view from this.

Metal tables

Those who are “friendly” with hardware and have it on hand welding machine, you may be interested in the option of metal furniture. The products are elegant and aesthetic, with openwork decorative inserts. The metal table will also need to be protected from premature destruction. This is done by priming the metal before final painting.

round garden table with stone countertop and curly metal legs

Forged tables will satisfy the needs of respectable owners, but it is unrealistic to make them with your own hands. Such designs are ordered by professionals. Forging requires the conditions of a forge. However, considering that products of this type can be wonderfully combined with wood, stone, glass, you can only purchase a forged base for the table and complete it with a tabletop yourself.

DIY garden table: interesting ideas

stylization of the table and chairs mushroom meadow will create some zest in landscape design summer cottage

If you are determined to work on creating a country table yourself and are ready to make it non-standard, look at the “unnecessary” things available in every shed. Perhaps among them there are items that can become consumables for creativity.

Assorted assortment

No less practical option For a country table, along with wooden, metal, rattan, and stone products, there is a “hodgepodge” of all sorts of things. This creation will become a multi-colored “character” of your garden and will never go unnoticed. What is it made from? You will not believe! Your starting materials will be:

1. Broken flower stand.
2. Metal barrel lid.
3. Scraps of colored plastic or round glass.

timber set

Take a piece of paper and try to draw a circular pattern on it in the spirit of Moroccan style. Enlarge your creation to the required size. A photocopier will help you do this quickly.

We place the resulting blank under glass and draw lines with a copper outline. Let it dry for a day or a little less. The manufacturer indicates the recommended drying time.

it is enough to decorate the sides of benches and chairs with wheels to get an original garden furniture for the dacha

Now it’s time to paint the marked glass with stained glass paints. The main thing here is that the colors are located evenly within the area allocated to them. If you have never worked with specific paints, it makes sense to practice on a separate piece of glass in order to understand how much you need to use for high-quality painting of fragments. The completed painting must also be thoroughly dried.

The finished glass can be additionally decorated with elements drawn with a copper outline.

Cover the lid of the barrel with white paint, which will hide traces of rust, and proceed to preparing the main part of the tabletop.

garden table made from a basket of firewood

The metal part of the flower stand, which will serve as a supportDIY garden tableneeds to be primed and painted acrylic paint copper color and partially patinated.

Once the footboard is ready, seal the areas where it touches the glass with window sealant. This is necessary for its better fastening.

Now the final stage. Assemble all the parts together: place the glass tabletop in the lid and place the composition on the stand.

It may not be very comfortable to dine at such a table, but drinking coffee in the cool of the evening will be very pleasant.

By decorating an ordinary tree stump with mosaics, you can get an original table

Pallet models

After building a country house, you probably have at least a few pallets left on which packaged bricks or building mixtures were delivered. You don’t even suspect what a lifesaver this is for decorating your dacha. With their help, the table will be ready in a few hours, and it will look such that it will not be embarrassing to place it not only in the garden, but also in the home interior. In this case, note that you will not even incur any special financial costs.

garden table made from pallets

A table for a garden, made with your own hands from pallets, can be constructed in several ways. For example, for the simplest option you will need:

1. Screwdriver.
2. Brushes.
3. Sandpaper.
4. Swivel wheels.
5. Colored antiseptic stain.
6. Screws.

mobile table for a garden made from pallets

First of all, start sanding the pallet. At the first stage of removing the rough layer, use coarse-grained sandpaper; fine-grained sandpaper will be needed for final processing. If you have a grinder in use that comes with a grinding wheel, use it instead of rolls of sandpaper. This will speed up the preparation process.

master class on making a table for a garden with your own hands

Turn the tray over and attach small casters to the bottom. This is done using ordinary screws. For greater reliability of fastening, place under the last washers, which can be removed from similar screws used for working with metal tiles. Don't ignore this advice. The wheel bases have enough large holes, and a screw without a backing will not be able to properly fix the part to the wooden surface.

step-by-step process of making a table

Now all that remains is to open the finished product with a wax-containing antiseptic. If you want to highlight the structure of the wood, use a transparent composition. To add color you will need a stain. You can style the table:

• under oak;
• larch;
• rosewood;
• nut;
• pine

A low wide table would be appropriate on the veranda, in attic room, bathhouse interior.

without additional treatment, the table will last at least two seasons

If you want to make your summer recreation area more comfortable, make not just a table from pallets, but a whole set country furniture, supplementing it with permanently fixed benches. Such a kit can be made portable and, if necessary, moved from the barbecue, say, to the pool or to the pergola.

bright table made of pallets for the whole family

A creative option for a country setting would be a pallet transformed into a tabletop and equipped with vintage legs left over from an old chest of drawers, table, or cabinet. This detail needs to be highlighted in a contrasting color.

You can use such furniture in the bedroom, gazebo, or on the terrace.

Reel table

Vertical planks allow you to place various items

“The coil itself is heavy, but it’s easy to construct a lightweight version from it table for the dacha and again, do it yourself »

Cable spool is also an excellent material for creating country house design. Look at it – it’s almost a finished table! A little decor and it's ready to use. The easiest way to decorate a reel is with twisted twine. To do this, simply wrap it tightly around its trunk. The upper disk of the structure is sanded and varnished. If you want to add functionality to the product, install vertical slats around the circumference. They can also be decorated with rope. With the advent of crossbars, you can store the necessary items under the table.

reel table with umbrella mount

The coil itself is heavy, but it’s easy to use it to construct a lightweight version of a table for a summer house and, again, do it yourself. You will only need the top disk from the product, which will act as a tabletop. The frame frame for its installation can be made of metal.

If in shady garden If you find a stump of suitable height and strength, then it can also be converted into an improvised table using a reel disk. This idea will be good not only for a playground, it can also be rationally used when organizing a relaxation corner for adults. By sawing a wooden disk in half, you can assemble original chairs, which can also be placed on stump legs. This will make a nice garden set.

a table made from a reel can be decorated with any pattern

Wood table?

Why not? This brutal option can decorate a barbecue area or even a living room. Work is nothing at all. We find an old thick log, saturate it with stain and level the lower part, giving the product stability.

table on wheels made of stump

A mobile table made of hemp is no less simple to manufacture and attractive in design. By the way, its functionality can be expanded if you are not too lazy to sew a foam seat on it, which will allow you to easily transform the structure into a comfortable pouf.

Chopped firewood is not in short supply at the dacha either. Using them, it’s also not a problem to quickly build a comfortable table design for your garden with your own hands. Assemble a flat base and secure the split timber into the tabletop with a strap tie. Put it all down and enjoy communing with primeval nature to the fullest.

table for a living room from an old log

Garden composition made of tires

Take your time to get rid of old tires. They can be used to make excellent landscape decor with extended functionality: use the table not just as a table, and the pouf next to it not only as a pouf, but also create a place inside them for gardening tools, for example.

the table and chairs are made in the same design style from old tires

Paint the tires in a color acceptable to you, dry them, fold them into a column, fastening the elements with silicone sealant or other suitable compound.

Now work on the table top and seat. It’s a good idea to make the first one from durable plastic or cut it out of wood. For the pouf, also cut out a plywood disk of slightly smaller diameter than the tires, glue foam rubber to it and cover it with fabric. The removable parts are ready.

Cooking table

mobile table made from old quartz with a wooden tabletop

Did you find grandma's brew in the bins? Fabulous! Let's transform it into a mobile storage table. We equip the bottom with wheels, and for the upper part we assemble a tabletop from boards. Having cut the boards to size, we assemble them together into transverse strips, the length of which should correspond to the diameter of the weld. This will help the tabletop stay firmly in place and not move to the side or tip over at the slightest load. There will be enough space inside the makeshift table to organize a mini-bar.

Using the same principle, you can convert empty boxes, barrels, etc. into useful items.

original table with large metal wheels instead of legs and built-in benches

Conclusion

As you can see, assembling a garden table with your own hands is a very exciting and absolutely not labor-intensive activity. Here, even beginners will not have to be afraid of ruining something, because the work will be done with items and elements that are initially unsuitable for direct use. Try your hand at something that is unfamiliar to you. Perhaps the final results will become an incentive not to stop there, but to go further. From the presented materials you can make many more unusual and useful things in your country life!

Photo gallery - DIY garden table: