Interior decoration of jambs inlet metal doors. How to make a metal entrance door finish

It is this question that owners of the good metal doors And you do not want to change them to the Chinese "Female".
If outside such doors can simply paint "hammer" paint, then the internal finish is a thinner case.
I will show you one way.

We have a door made to order, the size of the cloth 189x75.
We screw the rail around the perimeter.
Warm the door with extruded polystyrene foam, in our case 40mm thick. PPS glue with liquid nails to the metal, cracking cream.
We get such a picture

After drying, the foam is pretty extensive.
Separate the door we will be MDF panels

Our panels have a size of 29.5mm with declared thirty. Cut side panels So that the average is exactly in the center.
We apply liquid nails

And glue to the door

To fix the edges of the MDF, nail nails for platbands with a circular hat in a centimeter from the edge

It remains only to cry around the perimeter plastic corner. Glue on superclauses.

Malyary Scotch is not obligatory, we were barely so. You can just hold the corner with your hands for some time.

The door is ready

Total time spent - 2 hours
Materials:
PPS 170r x 3 pieces \u003d 510r
MDF - 450r
Liquid nails 2x100 \u003d 200r
Foam 250p.
Rake 100r
Corners 100r
Self-tapping screws, supercows, nails 100r.
Tool and straight hands - invaluable.
Total for materials ~ 1700r + shipping, supply.

If you do not want to make the door yourself or do not have everything necessary toolthen we can make a similar door for you.

If your entrance door is pretty cheerfully over time, simply left the fashion or does not harmonize with the interior of the hallway, but it remains strong and able to protect the accommodation, you can perform new finish And give the canvas a new life.

The easiest way to correct wooden door leafBut iron doors can be put in order. Consider in detail how you can use the doors from the inside and outside.

The entrance door from the inside: how to improve

Options are really a lot:

• lining;
• artificial leather;
• PVC panels;
• veneer various varieties tree;
• father Pallets and many other options.

Actually interior The canvas can be separated by anything, the main thing is that the material is practical, not marking and corresponded to the entrance hall. For example, you should not mix modern materials Economy class with classic or eco-style, and, on the contrary, use an expensive array of luxury wood for the hallway, plastic. The door can be the main accent of the hallway or, on the contrary, to merge with the walls in the "Invizable" box, the main thing - harmony and the combination of materials.

Learn more about how to shelter the door to the most common material - artificial leather - look at the video.

How and how to reflect the old entrance door outside

For exterior decoration both wooden and metal doors are suitable

• artificial leather;
• wood veneer;
• putty + paint;
• decorative film, etc. Options.

It is worth noting that even the simplest and standard materials They may begin with new paints, if you move away from the events, use the non-traditional decor.

How to ennoble the entrance door with fittings

The market is filled with a mass of fittings different species: Pens, locks, calls, eyes and more today can be found in any stylistic variation. Of course, the price of the issue fluctuates depending on the quality of products, their functionality and design on a simple scheme: the product is better, the more expensive it is.

Lock

In essence, this main element Housing protection, so he, first of all, should be reliable, preferably, with the maximum number of degrees of protection. The easiest way to choose a hidden model, almost imperceptible on the door canvase. So you can and provide a decent look, and sleep peacefully.

If you want to regit, you can install the castle "Under the Starin" - a unique appearance of the entrance door is provided.

Doorhandle

The main requirement for this accessory is harmony in the holistic image of the portal. Do not choose an elegant door handle For the door in the style of loft or minimalism, although for most styles bent or wrought-iron handle is perfect.

An excellent option is a backlit handle, the flashlight of which is directed to the hole of the castle. Its style can be anyhow, but the convenience of the device will be assessed by you repeatedly.

Eye

The eye can be both modest, barely noticeable and become the main decoration of the entrance door, and maybe there is no one at all. Moreover, it is not necessary to buy dear fitness in this case. For example, minimalist modern design It will be perfectly combined with painting or cool sticker.

Door hammer

This accessory practically calmed in the summer, however, lovers non-standard solutions They can safely use it as a functional decor of the door canvase. In a good way, it is worth abandoning the call, but this optional condition is the main thing that he does not particularly rush into the eyes.

Options for door hammers are a huge set, from classic or simple, to the most cute, funny and original.

03.09.2016 6025

The strength characteristics with which the doors are metallic, ensure constant demand for their installation and the corresponding set of proposals proposed.

For which they are appreciated

• Infexial to shocks, damage, are not subject to destruction, burning or rotting.
• Hack resistant: Standard models are made of 1 or 2 steel sheets, strengthened rigidity ribs and have anticipable pins that are cemented into the carrier concrete wall. They are difficult to break, remove or damage.
• Durable: They are not trembling and not aging. The products treated with anti-corrosion compositions serve for decades without the need for special care.

The only drawback is the rude appearance of the cold metal. Although many manufacturers offer a solution to this problem, providing a rich selection of structures in the economy segment of the market and, but usually well decorated steel products are very expensive. The output for many becomes finishing. It allows you to decorate and ennoble entrance to an apartment or a house with the smallest loss for a wallet.

Learning the door design

The design consists of two main parts:

• the door frame is a fixed frame, embedded in the opening;
• door canvas - a movable sash consisting of a frame that is attached one or two steel sheets With intermediate insulation (or without it) and ribbies (cross-shitches).

It is manufactured by welding from bent profile, profile pipe or steel corner. The most durable is the first option. used for web, not less than 2 mm for the outer coating and 1.5 mm for internal. Stiffness fins prevent flexion and sheeting sheet. Antician pins are welded in the door ends, and the space between the two sheets can be filled with fillers - foam, expanded polystyrene or minorvata. With its absence, the insulation layer is easy to install on its own.

Finishing options

Facing metal doors, which improves their appearance, can be carried out using a variety of materials:

• skin and its substitutes;
• laminate;
• tree;
• plastic;
• powder spraying.

Finishing with leather or substitutes. Conducting vinilies (leatherette variety) Complex finishing option. A cheap analogue of an expensive material softens the stiffness of the structure and gives the house a cozy view. A soft insulation is often laid under it. But the leatherette is easy to cut, break, it is damaged by feline claws and dog teeth, which spoils the overall impression of the type of the entrance door. It is recommended to use it for the room. The finishing of genuine leather gives a respectable species, but also does not add practicality and is very vulnerable.

Laminate. This material is a multi-layered wood-made slab Increased density covered with waterproof film. Laminate is beautiful and cheap, produced with a large variety of colors. It is often used as a finishing material, it is easy to install (it has special grooves for the "key" connection, panels are snapped one to another) and undemanded in operation.

Its minus is insufficient moisture resistance. Upper protective film It is not capable of providing 100% tightness. The material has a low resistance of moisture, install it on the doors having an exit to the street, is not recommended.

MDF. Finishing of iron doors MDF sheets (fibreboard middle density) Also relates to widespread options - too often you can find classic lining in the entrances. Doors see S. finishing MDF. Adely, stand inexpensive. The minuses are the same as the laminate - low moisture resistance and insufficient strength. This material is relatively mild structure, the blow to it even non-heavy items leaves dents. Under the influence of water, he swells and comes into disrepair. Doors with MDF are appropriate in places protected from precipitation.

Wood. - elite, they are fixed on the surface with the help of durable glue, in appearance by nothing differing from the door from the massif without decoration. Give the status of the dwelling, but the cost of such a finish is high, especially if the pad is used valuable breeds Tree, with artistic thread or splashes.

Economy Facing Wood Facing with Tree - Testing clapboard, popular finishing material in the form of narrow wooden planks. It is worth it, it is installed along, across or "on oblique", to choose from the owner, which gives each door an individual appearance.

For mounting, it is first made by a hand frame and self-drawing (it is previously drilled by holes and insert dowels) screws to the canvase, all other planks are easily attached to wooden frame.

Plastic. Democratic material used for all species finishing work. Its main advantages is low price, a neat appearance given to the product or room, and easy to care. Among the disadvantages are fragility, the instead of color, flammable. It is more often used to finish office and commercial premises and doors.

Powder spraying. Very durable finish, carried out in the factory. Metal doors with powder spraying were called anti-vandal, since they do not form cracks, scratches and other damage, due to the special surface processing technology. First, a polymer-powder coating is applied to the metal, and then it is burned in the furnace. Under the influence high temperatures The composition is melted by purchasing high strength characteristics. Metal doors with spraying are expensive, at home is impossible to produce such a finish.

Remove the door with your own hands

Almost all types of cladding, with the exception of working with powder spraying, can be carried out independently. The algorithm of actions and tools will be the same, the difference is only in the selected material and its cost. The following devices will be needed for work:

• roulette, line;
• marker;
• hacksaw, jigsaw, construction knife;
• drill with metal drills, screwdriver or screwdriver;
• self-tapping screws, screws, dowels;
• glue "Liquid nails".

The material selected for finishing is laminate.

Stages of work

Preparation of the workplace. It will take a horizontal surface sufficient to place the trim object on it. Doors to lay the face down on the prepared area, remove accessories, clean from corrosion particles, you can use specially intended for this. Then, if necessary, paint, wait for drying.

Warming (as option) - the next stage. If the door consists of two metal sheets, and between them there is no insulation, then you can fill the space with your own hands by filling out the space between the outer and the inner sheet of foam in several layers (you can use Minvatu). On the last layer Polyfoam is applied glue "Liquid nails", covered with an inner metal sheet. If the door consists of one canvase, then cover the foam can be fitted in size sheet of chipboard - The resulting "pie" will ensure warming with the smallest costs.

Council. Holding manipulations with door constituents (foam, chipboard, laminate or other lining), do not forget about the need to do the holes for the "eye", the lock and handles in all layers of the door "cake".

Finish laminate . Execution depends on the fastening method:

• on the frame out wooden Reques;
• on glue.

1. In the first case, a frame of pre-painted wooden plates is fixed around the perimeter. A drill with a metal drill make holes in the canvas, insert a dowel, and they screw the self-tapping screws, fix the rails.
2. Laminate planks are attached to a wooden frame, snapping one to another and fixing self-drawing. It should be taken into account that it is necessary to start the finish from above: if you have to trim the last bar, then it is not so noticeable below.
3. The process is repeated from the second, at the very end, the contour is finished (you can use).
4. After the edge of the edge edge and screwing the doors, metal doors with laminate are returned to the place inserting into the opening.

If the laminate is decided to put on glue, then the metal surface must be primed for better adhesion of heterogeneous materials, wait for drying. Stick panels begin to top down, finish the decoration of the edge.

Do not forget about the slopes

Metal tambourous - side space in the opening between the two doors. When using laminate, it is more logical to issue the same material: from top to bottom, framing the edge plastic corners in tone. Often for the finish cladding of the near-door wizard, the wizard is used fake diamondHe completes the decorative ensemble created by their own hands.

Steel doors with decoration transform an apartment, a house or cottage, giving them a respectable look. The facing process not only does not represent complexity, but also gives satisfaction from creative labor.

The iron entrance door ceased to be a sign of prosperity and became the norm. Today share several classes iron Door, guided by the characteristics of the armor, the quality of fittings, finishes and availability additional features and elements. The issue of finding the entrance door gets up in two cases: if you want to give presentable external view old door Or if you at one time saved on aesthetics and bought a new one, but completely unsolvable iron entrance door.

Options for Iron Door Outdoor

View of the door outside - a business card of your apartment or at home. By the door, people immediately develop an opinion about the tenants of the house. Therefore, to the question of its external finishing, it is necessary to treat particularly responsible.

Powder spraying

Powder spraying the outer side of the iron entrance door is performed in industrial conditions. Do not even try to do it yourself. From ordinary staining, this method is distinguished by extremely high quality. Painting integrity is preserved for 20 years (guaranteed). Particularly durable particles do not lose brightness, resistant to minor mechanical damage and exposure to ultraviolet rays. Surface can be washed chemical compositionswithout fearing her damage. A more durable and aesthetic staining of the iron door has not yet come up.

MDF covering

MDF panels are lightweight, beautiful and practical material. They are much easier than the array, but perfectly imitate natural beauty Tree. The trimming of this material can be both factory and home. If you saved and your door is devoid of finishes, you can additionally use the services of the wizard or perform the work on your own. But it is better to immediately buy a complete version of the entrance door and not spend time and money on this question.

How to detect the outer side of the MDF panel door

This process requires availability. basic set Tools, skill and courage. Compass the screwdriver, bolts or liquid nails, MDF panels of the desired color and size. The main complexity consists in the selection of a suitable MDF-panel width. It is difficult to find a holistic cloth, and joints in homemade version It turns out rude. So, how to see the door with your own hands:

• To begin with, remove the door with the loops, smoothly lifting it up;
• Remove all accessories: lock, handles, loops, riglia, eyes;
• Lay the door to a horizontal position;
• Gently measure the unified MDF sheet in the size of the door web (if possible);
• At the ends of the door, install special angular rails in the color of the main trim material;
• It is best to fix the panels on liquid nails, especially delicately related to the shakes and the ends;
• Screw back all the door accessories;
• Install the door back;
• Check closing ease.

Independent coloring

A quick way to enjoy the outside of the input iron door - to paint it yourself. It is best for these purposes that can be satellites with universal paint, or acrylic-based paint. They are persistent, have bright colors And uniformly applied. From the brush you risk getting traces of a pile throughout the surface of the door canvase, paint it unevenly. The most popular such colors like bronze, gold and silver. You can also use paints with a "highlight". For example, paint, which artistically cracks when dried. To apply the dye, it is not necessary to remove the door with the loops. It is enough to remove all the accessories and protect the unwanted to dye the surface with a painting film.

Additional decorative elements

People who value comfort love extra decor. This is especially true for owners of private houses and cottages, where the entrance is on open space. The door may look quite trivial, but to be supplemented with additional decorative elements. It can be festive wreaths, exquisite call design. Instead of the call, it is still like to install wrought-iron handles with a knock function. Mounted street lights and other decor. It all depends only on the borders of the imagination of the owner of the house.

Options for internal finishing of iron entrance doors

The inner side of the entrance door should be cozy and respond to the functional requirements of households. Not everyone loves standard design solutions. Therefore, today we will talk about several options. internal trim Entrance door.

MDF panels

The inner covering of MDF panels differs little from the external, which we described above. However, there are differences. In addition to aesthetic function, it can also serve additional sound and thermal insulation. To do this, before fixing the MDF-web itself, it is necessary to install an intermediate soft layer. It can consist of several layers of noise insulating sheets and a furniture foambed layer. It is also possible to use insulation used in construction.

In order to fix the intermediate layer, its sheets will need to be cut by a stationery knife in size of recesses in the door. As a rule, metal partitions that divide it are installed on the canvas in the inside of the canvas. It is in them that we will place the insulation. Fixing the insulation can be made on any kind liquid nailsthat is at hand. Even liquid nails based on PVA are suitable.

After you safely dismissed the door with insulation, go to the decorative part of the question. To do this, you can use the instruction above, only liquid nails in this case in obligatory Replaced with bolts.

Laminate clamping

Laminate - unique finishing material. They can be seen anything: floor, walls, slopes and even the door canvas itself. It makes it universal Materialwho especially love designers. With the help of laminate, it is easy to achieve harmonicity of color transitions in the interior.

Unlike MDF panels, laminate has additional feature The structure making work with him is fast and pleasant. Namely - castles. After you removed and insulated the door as we described in instructions for finishing MDF panels, you can go directly to the trim:

• Remove the door leaf and accessories;
• Heat the door from the inside;
• Collect one whole shield from Laminate sheets (follow no cracks);
• Cut the shield exactly in size inner doors;
• Install the side corners on the door ends in the color of the laminate;
• Lock the shield with screws or bolts (for this it is better to use a screwdriver);
• Cut holes under the castle, eyes and handles;
• Install back accessories;
• Install the door on the loop;
• Adjust closing.

Outlook by an array of tree

This option is suitable in two cases: if you plan to sew the iron door with eurry chart or install the finished door leaf from the wood array. I want to warn in advance that work with a natural tree is a very responsible process, the errors in which can be notable to hit the wallet. The Gardian catalog contains several thousand types of entrance doors with a trim from natural tree. It is in this case that it is better not to save.

Fastening a wooden door leaf to the entrance door

This "Soviet" method is relevant for you if you have a beautiful wooden interroom door suitable sizeAnd you do not know where else you can install it. Agree, a rare case. Wooden cloth It has a significant thickness and mass. Therefore, it is often necessary to cut the inner iron partitions of the iron door and skip the stage of its insulation. Moreover, the wooden door canvas must be additionally processed to look aesthetically and not to issue an unnecessary wood.

Installing a mirror on the door leaf

How can you get out of the house without making sure that you look great? This is not understood by anyone, especially the beautiful half of humanity. The mirror on the inside of the entrance door refers to the additional decorative elementsbut is only a functional character. This element is especially relevant for small vessels, in which everyone will not immediately fit and have to save space.

The factory execution in this case is more aesthetically: instead of heavy glass, a film or lighter material is used, the mirror is almost cast the door element, nothing weighs. It is even installed in the door eye - it is so sustainable for mechanical damage. Home execution of the idea will look much rougher and for money can come out somewhat more expensive. Therefore, we recommend that you familiarize yourself with the Catalog of the Gardian company, before you decide to independently install the mirror on the door leaf.

Soft sheath

Another option interior decoration Iron Door - Sheathers Cover, Dermantine or vinyl web. This process combines decorative and practical components. You will warm the door at the same time and make it similar to the soft. leather sofa. The sheathing of the iron door Dermantine consists of several stages:

• Preparatory stage (remove the door and accessories);
• Insulation. At this stage, we laid the insulation in the recess, as well as install an additional single sheet from above;
• Testing door with a substitute for the skin;
• Installation of fittings and doors;
• Check the quality of work.

In more detail about this method, you can read in our previous articles.

Internal finish of the entrance door: video