How to properly install a new toilet. How to install a floor standing toilet. Wood plank removal and floor leveling

Of course, such work can be entrusted to professional specialists, but self-installation toilet bowl will help save enough a large sum Money, which is very good.

The process of installing new plumbing usually occurs in this order:

• Buying a new toilet
• Dismantling of obsolete plumbing;
• Plumbing unit repair;
• Do-it-yourself toilet installation and connection.

Buying a toilet

So how do you install a toilet yourself? The first thing to do is quickly, and most importantly, to choose the right new plumbing. On modern market there are a huge number of types of toilet: they are vertical and horizontal; visor, funnel-shaped and dish-shaped; with combined drain barrel or with standalone. In addition, toilet bowls are divided according to the method of attachment: with 2 and 4 attachment points. It is better to take the type of toilet drain the same as it was before, because then you will not need to change the supply of your sewer pipe.

Removing an old toilet

The second stage of the installation of the toilet bowl is the elimination old plumbing. Such a process is quite simple, you can do it yourself. First you need to turn off the flow of water to the tank, pour out all the liquid from it and unscrew the hose. Then you should unscrew the mount of the tank and the toilet itself. During the installation of the toilet in a private house, it is usually fixed with a special cement coating. In this case, it can be easily removed with a chisel and hammer. When the toilet is removed, it is best to close the sewer pipe with a special plug, because the gases from it are very poisonous.

Toilet repair

After dismantling the old plumbing, you can start repairing the toilet. It is very important to level the floor well in order to new toilet became secure and strong.

After that, you can proceed to the main work according to the toilet installation scheme, which is indicated on our website. For clarity, we also recommend watching the video at the end of the article.

Installing a new toilet

So, to install a toilet bowl, you need to attach a corrugated pipe or a rigid pipe to its drain, but it is best when the plumbing drain goes into the pipe itself without them, but then it is important to use a good rubber seal.

When the base is fixed, you can install a tank or bring a pipe from a previously installed one. After that, you should definitely check the performance of the toilet bowl.

The last step in installing the toilet with your own hands is to attach the toilet seat.

To fix it, special spare parts are sold in the plumbing kit, and the toilet bowl itself has several holes for a threaded connection.

Although it is much easier to use the services of a professional plumber, many people nowadays cope with the problem of installing a toilet on their own. With the production of plastic pipes and fittings, piping and installation work plumbing equipment moved into the category of "clean", their installation has been greatly simplified, the connections have become stronger and more reliable, the equipment is more durable.

It has great importance such a factor: the toilet is installed for the first time or instead of an outdated one. When equipping a new sanitary room, it is possible to plan the installation of a toilet bowl of any design, it will not have to fit into the already existing limited space. In any case, having little skills in working with tools and a desire, it is really possible to cope with both tasks.

Toilet selection

When it comes to choosing a model, the price says more than the quality and construction, but the material from which they are made and the design. Quality can be guaranteed by a reliable manufacturer. The Russian factories in Kaluga and Stary Oskol have proven themselves most worthily on the market. The cost of toilet bowls can satisfy the needs of any buyer, it ranges from 2 thousand rubles to several thousand dollars, and their installation takes from a thousand rubles or more.

Depending on the design of the toilets can be:

• Traditional floor
• Suspended

Suspended are usually installed in bathrooms with limited space. In this case, the tank can be mounted directly into the water pipe.

Floor Products Provided a wide range, excellent in shape and material of manufacture. If the area allows, it is advisable to install, in addition to the shower toilet, and choose appliances that will harmonize in color and design.

Toilets are made from a variety of materials:

• Steel
• Cast iron
• Porcelain
• Faience
• Glass
• Plastic

The most common of porcelain or ceramics. Their service life is up to 50 years. At the request of the client, they can be made of exclusive materials: wood, finished with precious metals and inlaid.

According to the design of the flush, they are divided into:

• Vertical
• Horizontal
• oblique

The type of drain affects the shape and size of the toilet.

Currently, toilets are commercially available that combine the function of a bidet and a heated seat.

Having settled on a model that fully meets the requirements and financial capabilities, after checking the completeness of the fittings, you can proceed with the installation of the toilet bowl. If necessary, first you need to dismantle the old one.

Removing an old toilet

To dismantle the toilet, you will need a set of the most primitive tools:

• Hammer
• Chisel or chisel
• pliers

An old toilet usually has to be replaced due to its malfunction or in order to replace it with a more modern one. If in the future it is not needed for installation, for example, in the country, it will not be difficult to dismantle the old one. Before proceeding with dismantling, it must be thoroughly washed and disinfected. His curves must have accumulated a large number of limescale, dirt and microbes.

It is necessary to work in rubber or silicone gloves and goggles. They will protect the eyes and hands from possible fragments and chemical effects of antiseptics. Water and rags should be at hand.

It will not be possible to dismantle the toilet bowl, which was screwed to the board with metal screws, later concreted, while maintaining its integrity. So its roughly broken out of sewer pipe, the remains with the help of pliers and chisels are carefully removed. In the siphon, which acts as a water seal and prevents bad smells from entering the bathroom, water remains, approximately two liters. She gathers with rags in a bucket or basin.

Recently installed toilet using plastic screws more difficult to dismantle. The difficulty lies in the fact that they are screwed directly to the floor, and in order to save the floor and not get hurt, you must proceed very carefully. The toilet can be easily removed from the tee of the sewer pipe.

Installing a new toilet on a tiled floor with screws

The toilet comes with installation instructions. When complex design diagrams of connection of knots and fastenings are given. After carefully studying it, you need to prepare the tools:

• pliers
• Drill with drill sets (Punch will not fit)
• Spanners
• Level and roulette

In addition to tools, you will need silicone, mounting gun to work with it, a pencil, chalk or felt-tip pen

You need to start by adjusting the float valve in the tank. Until it is fixed and access to its components is unlimited, it is necessary to adjust the valve in such a way as to prevent water leakage in the future. This is especially important in cases where the drain tank is mounted directly into the water pipe. If you lower the float lower, less water flows out, if you raise it, it can pour out through the overflow hole. According to the norm, the water should be at a level of 5-7 cm below the safety drain.

The procedure for installing a toilet bowl with your own hands, regardless of the design and brand, is carried out according to the same scheme.

1. The preparatory stage consists in cleaning the sewer pipe and floors in the bathroom.
2. A corrugated pipe is put on the outlet of the toilet bowl.
3. Installation on a tile requires special care: it is necessary to save both the tile and the toilet. To do this, on the floor cleared of debris under the heel of the device, put sheets of cardboard, rags or a special gasket, which some models are equipped with. The toilet is gently lowered to the connection point.
4. The final installation site is carefully specified several times, along the contour of the landing plate it is necessary to draw a line with a marker or chalk, and make a bold mark in the holes for screws or dowels.
5. Temporarily remove the toilet bowl to the side, using a diamond drill, holes are made on the marks for fastening. At this stage of installation it is very important to keep the fragile tile. Therefore, drilling is performed with a drill in the hammerless drilling mode. Only after passing through the layer of glaze can the impact function be used, exerting minimal pressure on the drill.
6. If there were no dowels included with the toilet, they can be purchased at any plumbing store. You will need two long metal screws, two plastic dowels, two washers and decorative caps to hide the screw heads. These are all sold together as a "toilet mount kit". First, plastic dowels are inserted into the holes, then the toilet is installed in such a way that the mounting holes are exactly above the dowels. A gasket is installed under the heel and, in addition, the joint of the heel with ceramic tiles additionally filled with silicone. This measure will ensure the tightness of the seam and protect the fixing screws from rust.
7. A rather crucial moment is the direct attachment to the floor. Screws with washers are inserted into the holes and twisted tightly, but not so much that the enamel of the device cracks or chips form.
8. When the toilet is already in place, it remains to connect it to the sewer. Corrugated pipe connects the outlet to the fitting of the sewer pipe, the junction is smeared with silicone.
9. The cistern is attached to the top of the toilet with bolts made of of stainless steel and sealing gaskets.
10. Water is supplied to the tank through flexible hoses. When tightening the nuts on the hoses, it is important not to overtighten, this work is done manually, only then you can slightly tighten the nuts with a wrench.
11. In order for the silicone to completely dry and the toilet bowl to be ready for use, three hours are enough.

This completes the installation on the tile.

Installing an epoxy toilet

Above was a classic do-it-yourself installation scheme. In addition to it, there are methods such as mounting on epoxy or on a wooden board using screws.

Installing an epoxy toilet requires special training floors. Notches are applied to them and artificial roughness is made, the surface is treated with solvents or other degreasing materials, resin is applied with a layer of at least 0.5 cm. The device is fixed in place and fixed in desired position by using various devices at 12 o'clock. Only after this time has elapsed is it possible to continue working.

Installation of plumbing equipment is carried out in strict accordance with building rules and regulations. Home craftsmen often experience fear of such work. This is used by service companies that request very decent money for performing fairly simple operations. Meanwhile, fixing the toilet to the floor is quite affordable for self-fulfillment event. It is only important to carefully read the existing work technologies, choose the most suitable one, and follow all the instructions exactly.

Regardless of the chosen method of attaching the toilet bowl, installation work begins with the assembly of the cistern. The device is assembled in accordance with the instructions and fixed in place intended for it. Also, before installing the toilet, the units for supplying and discharging water must be prepared. There are several methods for attaching devices. The main selection criterion is the floor material on which the equipment will be installed. Let's take a closer look at the most common methods.

Method number 1: installation on dowels

The most practical method that allows you to install the device with the least effort and time. It is optimal for use on a flat, smooth surface, since the slightest height difference adversely affects the quality of the flush. It is preferable to use this method of fastening for lightweight compact structures, since the fixation may not be entirely reliable. Plumbers advise installing equipment on a special gasket, which you can easily make yourself from old linoleum or a sheet of thin rubber. The toilet bowl is installed on the workpiece, circled around the contour with a marker. Then sharp knife or simply cut the gasket of the desired shape with scissors.

The device is fixed to the floor with dowels or special plumbing fasteners. Fasteners usually come with new equipment. It can also be purchased from specialized stores.

Now we need to markup. We “try on” the toilet bowl on the place prepared for the equipment and draw it around the contour. We remove the device. We apply a thin layer of sealant and glue the gasket on it. This design will be the most reliable, although some masters prefer to do without a substrate at all. You can start drilling holes for fasteners. As practice shows, if you glue the gasket with high quality and choose the diameter of the drill so that the holes for the fasteners are slightly larger than it, then further installation will be much easier. This is due to the fact that the rubber backing acts as a kind of "contact spot" for the floor and the device.

It happens that it is required not only to fix the toilet bowl to the floor, but also to raise it a little. This is true if there are several devices in the apartment. Then the last one in the system needs to be raised by about 3-4 cm. In this case, a piece of a two-inch board is used, which is used as a stand. It is cut exactly along the contour of the toilet and placed on the floor, a rubber substrate is placed on top of it. All this is fastened with a sealant and forms a reliable and solid construction. Holes for fasteners are drilled directly on the gasket.

Tighten the mount on the base of the toilet very carefully. Excessive force can damage the ceramics from which the device is made.

As fasteners, you can use long metal dowels or special plumbing fixtures. The latter usually come with new equipment. The quality of fixing they have is about the same, so you can use both options. We drive dowels into the holes prepared in the floor. We install the toilet and carefully screw it. It must be remembered that excessively strong tightening of the ceramic from which the device is made can be damaged.

Now you need to connect the device to the sewer. At this stage Special attention we give corrugation. We generously lubricate both its edges with silicone. We insert one of them into the sewer socket, and put the second on the toilet outlet. All parts of the connection should be carefully pressed with your fingers so that the sealing is of high quality. As an additional measure, you can use metallized tape, which can be used to seal the joints. We connect the water supply and the device is ready for operation. There is a similar mounting method, which is presented in detail in the video.

Method number 2: mounting on glue

Of all the methods for fixing a toilet to the floor, this one is the easiest, but also the most time consuming. For the curing of the epoxy mixture, which is used as an adhesive, it takes about 12-15 hours. This method can only be used for smooth surface. Most often it is used to fix equipment on floor tiles. The method is very easy to perform. First, both surfaces to be bonded must be well cleaned of dust and debris. floor tiles can be sanded to make it rougher. This will improve the adhesion of the material. Surfaces are degreased with any solvent or acetone.

Preparing glue. You can buy ready-made epoxy or make your own. For this you need to take 100 parts epoxy resin ED-6, 200 parts of cement, 20 parts of solvent or plasticizer and 35 parts of hardener. The order in which the components are added to the solution is important. First, the resin is heated to 50C, a solvent is added to it, then a hardener, and at the very end - cement. The composition must be constantly stirred to form a plastic, homogeneous mass.

To keep the toilet securely in place, flooring prepared: cleaned for better adhesion and lubricated with a small layer of glue. Excess composition, speaking under the weight of the equipment, is immediately removed with a damp cloth.

Properly prepared adhesive mixture can be used within one and a half hours. We apply it to the base of the toilet bowl so that the solution covers an area of ​​at least 20 square meters. cm, and the layer thickness was at least 4 mm. We install the prepared equipment in the right place, combining the sewer socket with the outlet, and press it to the floor with force. After that, the device is left for at least 12 hours. This period is necessary for the curing of the adhesive composition. During this time, it is not recommended to even touch the toilet. Then we connect the equipment to the water supply and sewerage.

Method number 3: taffeta mount

Most often, this method is used to install toilets on a wooden floor. Taffeta is a pad of durable wood to which equipment is attached. The thickness of the board from which the element is cut, corresponding to the shape of the toilet support rack, should be 28-32 mm. To protect the part from dampness, it must be carefully treated with drying oil. For reliable fixing to the floor from the bottom of the taffeta, an anchor is mounted. The simplest option is nails driven in a checkerboard pattern, which should protrude 2-3 cm from the part. The recess prepared for installing the toilet is poured cement mortar. Taffeta is sunk down into it with anchors. As a result, it should be flush with the floor.

After approximately 12 hours, during which the mortar is completely dry, you can proceed to fixing the equipment. The device is fixed with screws. Rubber washers must be placed under their heads, which will prevent possible damage to the toilet frame when tightened. Experts advise lubricating the screws with grease or graphite before work, so that later, if necessary, they can be easily unscrewed. Wood taffeta can be replaced with a rubber backing. It is cut from sheet material 5 to 15 mm thick, possibly even from an old rubber mat. Such a substrate should be 1-2 cm less than support post toilet.

Mounting the toilet on taffeta involves the use of a special wooden insert. The diagram shows all the elements of such a mount.

There are various ways to attach a standard toilet bowl to the floor. They differ significantly in complexity and time spent on installation work. It is important to choose the right fastening method. It depends on the material from which the floor is made in the room. Installation work can be carried out independently, but if there is no experience or desire, it is better to turn to professionals. They will quickly and competently carry out all the work, guaranteeing a long and flawless service of the new equipment.

Sooner or later there is a need to change the plumbing. Recently, many owners prefer to do the installation work on their own. Further in the article we will deal with how to properly install the toilet.

general information

Before you install the toilet with your own hands, you must select it. The main criterion in this matter will be the size of the room. So, for a typical bathroom, a "compact" toilet bowl model of imported or domestic production is suitable. Experts recommend purchasing a product similar to the one that stood before or with the same type of fastening system. It must be said that the assembly different types toilets are different. As a rule, the differences consist in the need to connect special equipment and additional features. Modern models are equipped with enough detailed instructions on different languages, including in Russian.

Important Points

Before purchasing a new toilet, you should carefully inspect the old product. You need to pay attention to:

• Release angle. Released today various models. The angle can be oblique, straight or vertical. You should measure the height of the outlet to the floor. If the output does not match in the model of the selected product, it will be possible to additionally purchase a drain transitional corrugation.
• Water connection. Traditionally, a bottom or side eyeliner is used. A flexible hose is installed. When choosing a new plumbing fixture, you should consider the length of the liner. Before installing the toilet, you should purchase a new hose.
• Mounting method. An old toilet can be fixed to the floor with two bolts. In this case, you need to purchase another set of fasteners. In some bathrooms, the appliance is cemented into the surface. In this case, it will be necessary to break the floor screed until a wood insert appears.

Before you install the toilet with your own hands, you should also check the method of blocking the water supply to the tank - from a common riser or locally. In the first case, you will have to contact local plumbers. It is also necessary to assess the condition of the sewer and water pipes throughout the apartment. It is possible that before you install the toilet, you will need to replace any elements. Before starting work, prepare the following tools:

• Drill and drill with a diameter of 10.
• Hammer.
• To assemble the tank - 2 wrenches.
• Silicone sealant.

Preparation for dismantling

Before you install the toilet with your own hands, you should remove the old product. Dismantling is carried out in several stages:

Dismantling

First of all, remove the mount to the floor. bolts (if old toilet screwed) are unscrewed. If the toilet is filled with cement, then the screed breaks if possible. If this is difficult to do, you will have to hit the plumbing object at the fixation points. After the toilet is removed, it must be tilted back. This is necessary in order to drain the remaining water from the cavities. Next, you need to disconnect the socket. The corrugation is simply removed. If a cast-iron or plastic socket is installed, then it must be disassembled to the first connection or cut to size. This is done after the toilet is removed.

Next, a corrugation should be inserted into the sewer socket. From the side of the joint, the element must be lubricated with sealant. The socket should be cleaned from the inside and also lubricated. The corrugation is inserted until it stops. After that, it is better to plug the entrance with an old rag or close it with a special plug to prevent the spread of sewer smell.

old mounts

If the floor is even (flooded with a screed or tiled), before installing the toilet on a tile or cement base, remove the old fixing elements. If the new product has similar fasteners, then the parts are installed in the old places. The old plastic dowels are drilled out. New ones are inserted in their place. Holes can be wider than dowels. In this case, the product will not be fixed securely. To prevent this, new holes should be prepared. The toilet assembly is attached to the place of fixation. Next, you should note the attachment points, taking into account the dimensions of the product, the length of the corrugation and the eyeliner. Dowels must be carefully hammered into the prepared holes. Items should fit easily. From proper preparation holes will depend on the further stability of the toilet.

Screed

If the plumbing product was flooded with mortar, then before installing the toilet bowl, it is necessary to make a new base. After removing the old product, the wooden lining will be visible in the recesses. The floor is leveled with a thick cement mortar, a toilet bowl is placed on top and screwed. After the screed dries, the bolts are finally tightened. One point should be taken into account here. Wood lining can rot over time. If the installation of the bar is not expected, then the screed is poured and allowed to dry for 2-3 days.

We install the toilet ourselves

A new product is attached to the prepared attachment point. Fasteners are twisted alternately - one and the second should be tightened evenly. The product is assembled with cistern. Usually, modern models made in the form of a compact design. In this case, the toilet and cistern are already connected to each other. When installing products equipped with automatic system collecting and draining water, usually there are no difficulties. However, attention should be paid to the assembly and adjustment of the float valve. This element is responsible for the volume and pressure of incoming water. The next step is to fix the flexible eyeliner. One end is screwed to the water pipe. Then you should open a faucet a little and drain a little water. This is necessary to flush the pipe from the inside. Next, the water closes, the second end of the hose is connected to the toilet. Here it is necessary to check the reliability of the rubber pads located under the nuts. Here's how to properly install a toilet.

System check

After completing the installation, you need to check the work. Water opens in the system. While it is being drawn into the tank, you should carefully inspect all the joints, check for leaks. Next, you need to drain the water several times. This checks that there are no leaks in the sewer connections. After a few hours, everything should be carefully examined again. Here's how to install a toilet bowl with your own hands.

custom design

Often there is so little space in the bathrooms that many owners decide to install wall hung toilet. It should be noted that the installation of this product is somewhat more complicated than the one described above. How to install a wall hung toilet? More on this later.

General information

The product itself and the tank are mounted on the wall. For this, a supporting frame is used - a frame. It is usually mounted in a wall (in a niche) and closed decorative panel. The depth of the niche will depend on the width of the tank. In this case, technical gaps of 1-1.5 cm should also be taken into account. The sewer pipe, which also closes in a niche, must have a horizontal socket. If there is no possibility to equip a recess in the wall, then the frame is installed close to the surface. From above it can be sheathed with drywall and tiled like walls. The design of the hanging toilet bowl allows you to disguise all communications. Outside there will be only the product itself and the button for flushing.

Frame installation

The height of the assembled frame is usually 1.3-1.4 m. The lower part of the frame should be equipped with adjusting screws. Brackets are installed on top. With their help, the vertical position of the frame is adjusted. The drain button is located at a height of about a meter from the floor. The toilet seat should be at a level of about 40-42 cm. Partially exact dimensions will depend on the preferences of the inhabitants of the apartment, partly on the product model itself and the position of the sewer pipe. As a rule, there is free space under the structure. It is quite convenient when cleaning the room. load-bearing frame installed in a strictly vertical position. For alignment, use the level. The future location of the frame can be determined using plumb lines. After that, holes are drilled in the wall and floor. Dowels are inserted into them. After that, the frame is installed and the horizontal position is adjusted with the screws. Vertical alignment is carried out by brackets. After giving the frame the required position, it is fixed with lock nuts.

The final stage of frame installation

How to install a tank? In this case, the element is not fixed to the toilet bowl. Installation is carried out on the frame. After installation, the tank should be connected with a flexible hose to the water pipe. Then it is necessary to adjust the elbow-shaped adapter in length. It connects the socket of the outlet pipe and the outlet of the toilet bowl. After that, the pins are mounted for fastening, in fact, the bowl of the plumbing fixture. Corners are installed around the perimeter of the frame. The lining will be fixed on them. All the necessary holes are cut out on its front surface - for pins, pipes and a release button.

Finishing the installation of the toilet

The product is attached to the selected place after the frame sheathing and other Finishing work. At the installation site of the toilet, the wall must be perfectly flat. A special paste must be applied to this place. White cement, Portland cement or white cement can be used as a leveling mixture. The paste should have the consistency of a thick slurry. A gasket is put on the pipes and pins (it is supplied in the kit), then the toilet bowl is hung and pressed tightly against the wall. At the same time, tighten the nuts. The protruding paste must be carefully removed. In conclusion, a few words must be said about how to install a toilet seat. Actually, there is nothing complicated here. The seat is usually attached with two bolts. Included with the product you can find these fixing elements.

Having understood the toilet installation technology, you can save on plumbing services and do the job as efficiently as possible. The toilet can be mounted traditional way or more modern method- with installation. In the second case, the drain tank will be hidden in the wall, which will favorably affect the interior of the room.

You are provided with instructions on how to complete each of the listed installation options.

Work set

1. Perforator.
2. Roulette.
3. Wrench.
4. Fan pipe.
5. Flexible hose.
6. FUM tape.
7. Fasteners.
8. Sealant.

In the case of installing a toilet bowl on the installation, the listed list will expand with the corresponding set. Everything you need is bought at any plumbing store.

Dismantling the old toilet

First step . Shut off the water supply and drain all the liquid.

Second step. We unscrew the hose through which the tank is connected to the water supply.

Third step. We unscrew the fasteners of the tank. If they are rusty, we arm ourselves with a screwdriver or open-end wrench. We press the bolt head with the selected tool and unscrew the nut with an adjustable wrench. If it doesn’t work, pre-soak the nut with kerosene. We remove the tank.

Fourth step. Dismantling the toilet bowl.

Fifth step. Disconnect the toilet drain from the sewer.

In old buildings, plums are usually fixed with cement plaster. To destroy it, use a hammer and a chisel. We need to prick the cement and gently shake the toilet to the sides. The drain should turn and loosen. We tilt the product, allowing the remaining water to drain into the sewer.

Sixth step. We close the sewer hole with a wooden or other suitable plug.

Important! Sewer gases do not have the most pleasant smell. However, they are poisonous and highly flammable. Be sure to keep this in mind as you work.

Getting ready to install

The base for the installation of the toilet must be level. There are several options for the development of events, namely:

• if the floor is tiled and does not have level differences, we do not carry out any preliminary measures to level the base;
• if the floor is tiled and not even, install the toilet with chopsticks. To do this, holes are drilled in the floor, chopsticks are hammered into them according to the level, and after that the toilet bowl is attached to the chopsticks with screws;
• if it is planned to replace the tiles, we will dismantle old cladding and fill in a new screed if the old one has level differences;
• if the toilet is installed in a new house or apartment without any finishing, we fill in the screed and lay the tiles.

We pay attention to pipes. Sewerage from debris and various deposits, we install a tap on the water supply (if it was absent before) to shut off the water supply to the tank.

How to install a conventional toilet

As a rule, when selling, the toilet bowl and the tank are disconnected. The internal fittings of the barrel are most often already assembled, which greatly simplifies the installation process.

First step. We put the toilet bowl in its place and make marks at the attachment points.

Second step. We remove the toilet bowl and drill mounting holes in the marked places.

Third step. We drive the dowels into the mounting holes.

Fourth step. Installing the bowl. We insert fasteners through special sealing gaskets. Tighten fasteners. You should not pull too hard - you can damage either the fasteners or even the toilet itself. We pull until the sanitary ware is firmly attached to the surface. From above we close the fasteners with plugs.

Fifth step. We mount the cover and seat. The manual for their assembly usually comes with the toilet, so dwell on this event we will not.

Sixth step. We connect the toilet to the sewer. The procedure depends on how the toilet outlet is connected.

Video - Installing a Compact toilet with wall outlet

Prices for accessories for toilets and urinals

Accessories for toilet bowls and urinals

If the release is done into the wall, we work like this:

If the release to the floor is being arranged, we do the following:

Helpful advice! If the toilet connection with drain pipe is carried out with the help of corrugations, sealing in most cases can be abandoned, because. the design of such an adapter hose is itself able to provide a sufficiently tight fit.

Seventh step. We carry out the installation of the tank. Drain mechanisms, as a rule, are sold already assembled. If the mechanism is disassembled, reassemble it according to the manufacturer's instructions (assembly order for different models may vary slightly).

We take the gasket from the kit and install it in the water hole in our toilet. Install the tank on the gasket and tighten the bolts.

Fasteners are most conveniently installed like this:

Eighth step. We connect the tank to the water supply using a flexible hose. We turn on the water supply and check the quality of the system. If it digs somewhere, tighten the nuts a little. The level of filling the tank with water is adjustable by moving the float lower or higher.

We let the tank fill several times and drain the water. If everything is fine, we take the toilet into permanent operation.

Modern version installation. A special wall installation is used, in which the mechanism of the tank is hidden. As a result, only the toilet bowl and the drain button remain visible.

We mount a wall-mounted toilet for installation

Video - How to install a wall-mounted toilet on a Geberit Doufix installation

The first stage is the installation of the frame

We carry out the installation of a metal frame with fasteners. We attach the tank to the frame. The position of the frame is adjustable with brackets at the top and screws at the bottom. Frames are sold separately, have the same structure and are suitable for use in combination with any toilet.

The assembled structure will have a height of about 1.3-1.4 m. The width should exceed the width of the tank.

The second stage - we hang the tank

We perform the installation in compliance with the following recommendations:

• we place the drain button at about a meter distance from the floor;
• between the attachment points we maintain a step equal to the distance between the eyes of our toilet bowl;
• the drain pipe should be located at a height of about 220-230 mm;
• we hang the wall-mounted toilet at a distance of 400-430 mm from the floor. These are average values. In general, focus on the growth of future users;
• between the drain tank and the wall we maintain no more than 15 mm distance.

The third stage - we mount the finished installation

We first check the evenness of the wall with a plumb line. When deviations are found, do the following:

The fourth stage - install the tank

First we connect the tank. The drain may have top and side outlets. Almost all modern models of tanks allow you to choose between these two options.

Important! When installing the toilet on the installation, it is better to refrain from connecting the tank with a flexible hose. will last much longer than a hose. Would you like to destroy the frame skin in the near future for the sake of a five-minute replacement of such a hose? That's it!

For connection, it is best to use plastic pipes. All necessary fasteners usually come with the tank. Separately, you have to buy only a panel for the drain buttons, and even then not always.

We connect the release of our toilet bowl with the sewer. The most convenient way to do this is with a corrugation. We check the tightness of the structure. If everything is fine, turn off the water, temporarily turn off the toilet from the drain and remove the bowl to the side.

Important! The procedure for connecting the cistern to the toilet and plumbing may vary depending on the model of the product. We clarify these points in a separate order and follow the manufacturer's instructions.

Fifth stage - we sheathe the installation

For this we use moisture resistant drywall from 10 mm thick. It is recommended to fix it with a double layer. First we do the following:

• we screw the pins for hanging the toilet into the frame (they are included in the kit);
• close the drain holes with plugs (also from the kit) so that they are not clogged with dust and debris;
• we make holes in drywall for pins, pipes and a drain button.

We fasten the sheathing sheets to the frame with the help of special self-tapping screws. Keep the fastening step at the level of 30-40 cm. The design will have small dimensions and weight, so there are no strict recommendations regarding the distance between the fasteners.

We tile drywall with tiles or finish it in another way at our discretion.

Helpful advice! Before starting to tile the box with tiles, we install a plug and a cuff in the place of the future location of the drain button. They are usually included in the kit.

Video - Installing a hanging toilet

Stage six - install the toilet

To do this, we connect the outlet of the bowl to the sewer hole and hang the product on the pins (we installed them in the previous stages of work). You can follow these steps in reverse order, whichever is more convenient for you. Tighten the fixing nuts.

Important! Pre-tile, which will be in contact with, must be covered with a layer silicone sealant(Instead of it, you can install a gasket).

You can turn on the water supply and use the toilet for its intended purpose.

The assembly instructions for the installation remain the same. Only the order of installation of the toilet bowl changes. Work in the following order.

First step. Lock your knee firmly. Metal fasteners will help you with this.

Second step. Treat the toilet outlet with technical ointment.

Third step. Install the toilet in the place intended for it. Circle the outline of the sanitary ware and mark the holes for the fasteners.

Fourth step. Remove the toilet and install the mounting brackets from the kit according to the marking.

Fifth step. Install the bowl, press its outlet into fan pipe and fix the sanitary ware with bolts or other fasteners included in the kit.

Sixth step. Connect the tank to the drain. Installation and connection of this element is carried out in the same way as in the case of mounting a wall-mounted toilet model.

Seventh step. We bring the drain button into a pre-prepared hole in the casing, turn on the water supply and check the operation of the toilet bowl. If everything is fine, we accept the product for permanent operation.

Read our new article- and also find out what varieties there are, how to choose and install.

Video - Installing an attached toilet with a hidden cistern

Successful work!

Video - Do-it-yourself toilet installation