Typical instruction manual for automatic fire alarm installations at energy enterprises. Security and Fire Alarm: Instructions for the use of equipment Operating instructions for automatic fire alarm
Instruction
operating instrument fire alarm Systems "Car"
1. This manual is intended for duty round-the-clock watched service, which is responsible for the performance of all serviceable rays of the station during their duty.
2. On all changes in the work of the station, the attendant Vakhter records records in the Watch Journal according to the appropriate form.
3. In standby mode, the current time is displayed on the CLINE CLOW.
1. Arming (individual)
· Enter the password
· Keys and select the menu "Take" menu and press the Enter key.
· Keys and select a menu "Take the SC" menu and press the Enter key
· Dial the address of the device (001-015) han the "ENTER" key.
· Dial № SC ( 1 – 4) han the "ENTER" key. For example:
· With successful, the capture of the SC under the protection on the board will highlight SC 012/003
Device number
№ SS.
·
2. Alarm mode
When switching the console from the current time mode to the mode "In" (ATTENTION) indicating
addresses of the device (001-015 ) and an indication of the n successful alarm loop (from 001 to 004)
Should:
· On the fire alarm loop table, determine the floor where the sensor is triggered.
· Urgently make an inspection of the room. Make a record in the operational log indicating the address and response time.
· After 1-2 minutes, the "ENTER" mode (attention) will be automatically reset to the duty mode, or goes into the "poke" mode.
· In the fire mode (seas) on the remote, the address of the device is displayed (001) and address of the alarm loop (001). On the table, determine the floor where the sensor is triggered. Urgently make an inspection of the room. Make a record in the operational log indicating the address and response time. When confirming the fire - to act according to internal instructions.
· If it turned out that the triggering is false, then to reset the alarm follows:
press the Clear key (several times) to exit the current time indication mode.
· Select the "Reset alarm" menu keys and press the Enter key.
· Dial the address of the device (001-015) han the "ENTER" key.
· The alarm sound will be reset and the remote control will automatically try to carry out the transfer previously installed on the protection of SC.
· Reset incorrect input is carried out by the "Clear" key.
Check the cause of the triggering in accordance with the SC table.
2. Removal from security (individual)
· Enter the password
· Select the "Removal" menu keys and press the Enter key.
· Select the Select CC menu keys and press the Enter key.
· Dial the address of the device (001-015) han the "ENTER" key.
· Dial № Shs (01-04) han the "ENTER" key. For example:
· With successful removal of the SC, with security on the scoreboard will be highlighted CHS 011/001
Device number
№ SS.
· Reset incorrect input is carried out by the "Clear" key
! Fire alarm is in 24-hour security mode.
3. Operator (Watchthent duty) When alarm receives is received, it is necessary to record the response time and the previous actions of third parties that could cause the instrument.
User instructions Fire alarm system based on granite 5
Instruction
operating a fire alarm system alerts about fires at: saint Petersburg, _________________________________________________
- 1. A common part.
The fire alarm system is designed to detect and alerts on the occurrence of the fire focus.
1.1. The system must, round the clock located in the standby mode.
2. Responsibilities of duty to maintain PS installation in a working condition.
2.1. The duty officer is obliged to conduct an external inspection of all protected premises for damage to the installed equipment and instruments.
2.2. Control all malfunctions and operations of the PS system and report to a responsible person appointed by order No. ____ from ___________ 2006
3. The operation of the system during a fire.
3.1. If the fire occurs in one of the premises of the case, the loop number is displayed and the type of triggering.
3.2. Legend in the system.
"Attention"
Warning 1 of the detector in one fire alarm loop flashing red
"Fire"
Warning 2 detectors in one fire alarm loop red is burning
"Malfunction"
Cliff, closure in the fire alarm loop blinks alternately red-green
When working in fire protection mode, the instrument provides an alarm signal to the audio player after a fire alarm loop disorder without delay.
When notifying a "malfunction", a continuous beep is issued, when the "fire" is notified is an intermittent beep with a period of 1 sec., And when noting "Attention", an intermittent beep with a period of 2 sec.
To go to a common "duty" mode, you must click on the width of the fire alarm's successful plume 2 times.
4. Action on duty when triggered by PPKOP "Granit-5"
Inspect the appropriate premises (according to the PS loot) in order to detect the smoke or the emergence of a fire. In the event of a fire, call the fire team by phone. 01 And, as far as possible, take measures to eliminate fire with existing fire extinguishing agents.
At the same time, report administration and operating organization about the happening fire.
The recovery of the system after the triggering should be made after checking and adjusting the signaling loops and the launchers licensed organization of conducting maintenance of this equipment.
Instruction Otitb
on fire alarm
1. General provisions
1.1. This instruction Determines the basic provisions for ensuring the performance of fire alarm installations and alerts and is mandatory for all employees of the organization, as well as persons on which the maintenance and planning and preventive repair is entrusted.
1.2. The person appointed responsible for the content of fire alarm must have the following documentation:
1.2.1. Contract for servicing fire alarm installations;
1.2.2. Sample application for troubleshooting;
1.2.3. Annual schedule for the planning and preventive repair of fire alarm systems and alerts;
1.2.4. List of train numbers with indication of premises protected by loops;
1.2.5. Executive (project) documentation for signaling and alert;
2. Actions in case of fire alarm operation
2.1. Each employee upon receipt of information on the operation of the fire alarm is obliged immediately:
2.1.1. Report a fire to the fireguard on the phone "01", on the cell phone "112";
2.1.2. Organize the evacuation of people according to the approved evacuation plan;
2.1.3. Keep the door to the location of the fire closed, and the windows are open;
2.1.4. Declare alarm for members of the voluntary fire squad;
2.1.5. Check whether the system of people's alerts about fire, as well as the system of air ventilation of people and, if necessary, lead them into action;
2.1.6. Perform actions to extinguishing primary means of fire extinguishing firefight at the initial stage of the fire;
2.1.7. Upon arrival of firefighters, inform them about the results of the evacuation of people, the location of the primary focus of fire, as well as the results of actions on the extension of the primary hearth;
3. Actions in case of fire alarm malfunction
3.1. When the automatic fire alarm is triggered, you must perform the actions specified in Section 2 of this Instruction.
3.2. If as a result of the above actions, a false response is installed:
3.2.1. Immediately O. this fact inform the person assigned to the content of fire alarm installations;
3.2.2. During the fault period, the alarm is carried out constant visual control of premises for the absence of fire;
3.2.3. With visual control, pay attention to the smell of smoke, malfunction electrical network (flashing light lamps, unauthorized shutdown of power supplies);
3.2.4. When suspicious signs are detected, organize evacuation actions, turning off the power supply in these rooms using devices designated on the evacuation plan;
3.3. The person responsible for the content of the automatic fire alarm is required:
3.3.1. Send a request to the licensed organization, which, according to the Treaty, to work on verification, maintenance and repair of alarm, and notify about the direction of application by phone;
3.3.2. Control the deadline for eliminating the fault of the fire alarm set in the contract, but later the end of the work shift;
3.3.3. The acceptance of troubleshooting work in the following sequence together with the service organization:
3.3.3.1. Make a compulsory workshop of all fire detectors using a clip (by pressing a special button on detectors) to flashing special LEDs on detectors;
3.3.3.2. Control on the fire device to work the detectors with a marking room or a plume;
3.3.3.3. To record a fire alarm fault log with mandatory signature by manufacturers of work;
4. When the power is disconnected
4.1. The person responsible for the content of fire alarm systems is required:
4.1.1. Check the status of fire alarm loops on the remote, the lamps of all loops should burn green;
4.1.2. When a faulty loop is detected, set the names of unprotected premises, perform the steps specified in clauses 3.3.1.-3.3.3.3. Acceptance of work at the servicing organization is performed when the power is turned off in these rooms.
5. Operation of fire alarm systems and alerts
5.1. The person responsible for the content of the fire alarm is obliged:
5.1.1. Store technical (design or executive) documentation for fire alarm;
5.1.2. Monitoring the conduct of the service organization checks and repair fire alarms with a record in a special journal;
5.1.3. In production repair work in the building and in the territory of referring serviceability by daily inspection on the fire unit (remote);
5.1.4. Include in the contract for the repair of premises items to restore fire alarm performance during damage to fire cables and equipment when repairing premises by contractors at the expense of contractors;
5.1.5. With the change in the layout of buildings and premises, it is possible to organize the equipment of the varied premises by fire alarm systems in accordance with fire safety standards;
5.2. Employees of the organization when alarm failure is found to immediately report this to the person appointed responsible for the fire alarm content, as well as the direct supervisor;
6. When checking the fire inspector:
6.1. The person prescribed for the content of fire alarm is required:
6.2. Prepare the available documentation specified in this manual for presentation;
6.3. In writing, invite a serving organization to participate in verification;
6.4. Results of checking alarm make to the appropriate log;
Instructions for the operation of fire extinguishing systems, APS, SOUE based on PPKOP "Corund 1I"
Approve
______________________________________________________
Instruction
operating systems of fire extinguishing, fire alarm and alerts of people about the fire at the address: ___________________________________________________________
PPKOP "CORUN 1I"
- 1. A common part.
- 2. The fire alarm system is designed to detect and alerts on the occurrence of the fire focus.
2.1. The system must be on duty around the clock.
3. Responsibilities of the head of change in maintaining the installation of PS in a working condition.
3.1. The head of the shift is obliged to conduct an external inspection of all protected premises for damage to installed equipment and instruments.
3.2. Control all malfunctions and operation of the system, report them to the head of the unit and duty guard on the checkpoint.
4. The operation of the system during a fire.
Actions by the head of the shift when the PPKOP 1 and "is triggered
On the front panel of the device there are light (LEDs are red and yellow color) Indicators The status of the signaling loops C 1 to 4 non-glowing LEDs correspond to the on-line state of the alarm loops, the power indicator " NET»Backup power indicator" RESERVE"Red with 1 per 1st state" FIRE»Pin.
Control buttons: " NET»Power on 220 V and backup power supply direct current 24 V, Tublings Turning out the signal loops from 1 to 4 button " Conclusion»To check the device in" Self Control", Button" SOUND»To turn off the beep, the buttons, the button" Reset»To restore the status of the loops after the triggering. Tublings of shutdown (plumes) and Tublings of shutdown (inclusion) of ASPT systems are closed with a protective casing.
With good operation, the instruments and serviceability of the fire alarm loops of the LEDs 1 to 4 on line blocks and on the instrument panel are in the off state. The LED lights off in green, the reserve LED is enabled.
In the event of a malfunction in the loop (or several loops), the yellow LED lights up " Fault»On the corresponding linear unit and on the instrument panel. The device displays a characteristic intermittent fault signal on the instrument console.
In this case, disable the button " SOUND", Reveal the protective cover of line blocks, disable the table switch of the corresponding loop to press the button" Reset»To restore the" duty "of the device status, make a failure of a fault time and recording the No. of a faulty loop into an operational log, to report to the management and call representatives of the Organization maintenance APS
In the case of the instrument, from fire detectors in " FIRE", The red LED lights up FIRE»The corresponding loop (plumes) sounds a characteristic continuous beep on the device, the remote sound signaling is turned on in the corridor. In this case, turn off the device sound signal (button on the panel " SOUND") Check the rooms of the corresponding loop on the absence of signs of burning, in case of confirmation of the event" FIRE»Call the fire team by phone. 01 And, as far as possible, take measures to eliminate fire with existing fire extinguishing agents.
At the same time, report to the head of the unit and call the CAT, inform the guide on the emerging fire.
When false response: Open the protective cover of line blocks, disable the corresponding loop toggle switch, press the button " Reset»To restore the" duty "of the device status, make an entry on the time of fault and recording No. of a defective loop into an operational magazine, to report to the head of the unit and call the representatives of the organization that maintains the APS.
In case of disconnecting the main source of the instrument, the backup power of the device remains on, which will signal the red LED " RESERVE" After restoring the main power supply of the device, call a representative of the serving organization for checking and recharging, if necessary, the battery.
About the health of the backup power supply and acc. Batteries sign LEDs " NET»Red and" Acc. BAT. " Green on a backup power supply.
Responsible Fire Automation Face
Added to the site:
Officer instructions on the actions of security officers when the object is protected [Name of the organization, enterprise, etc.]
Protection of property and the implementation of the input and transmission regimes established by the Customer and [Name security company] (license [n] [number, month, year] and valid to [number, month, year]), in accordance with the Law of the Russian Federation of March 11, 1992 N 2487-I "On private detective and security activities in Russian Federation", Agreement on the provision of security services.
1. General Provisions
1.1. This job description defines the procedure for the action of employees (hereinafter referred to as security officers) [name of the security company] when the object is protected [enter the necessary] (hereinafter - the object).
1.2. Guards, one of whom is a senior shift, obey [name of the manager's position].
1.3. In their activities, security officers are guided by:
Law of the Russian Federation of March 11, 1992 N 2487-I "On private detective and security activities in the Russian Federation";
A real job description;
Other documents regulating the organization of work on the protection of the facility and material values;
- [Enter the necessary].
1.4. Security officers should know:
Regulatory acts of the Russian Federation regulating security activities;
Instructions, orders, others regulationsgoverning the organization of work on the protection of the facility and material values;
The specifics and structure of the enterprise and the mode of operation of its divisions;
Instructions for bandwidth on a protected object;
Samples of passes, trade overhead and other throughput documents;
Signatures of officials who have the right to give orders for import and export (removal) of inventory of commodity values;
Rules of checks of exported goods;
Rules for inspection of things and personal inspection, the production of administrative detention, the design of materials on offenders;
The procedure for the detention of persons who committed theft, the design of materials on them;
The procedure for the use of weapons, radio resources and negotiation devices;
Terms of use technical means fire alarm;
The procedure for admission to the protection of separate premises, responding to discharge of security and fire alarm;
Location of primary fire extinguishing and communication facilities, the procedure for using them;
The rules of the internal labor regulation;
General Principles of Promotional Medical Aid;
Rules and norms of labor protection, safety and fire protection;
- [Enter the necessary].
2. Security Tasks
2.1. The main security tasks are:
Protection of a protected facility, prevention and suppression of unlawful encroachments and administrative offenses on a protected facility;
Providing public order on a protected facility;
Providing on the protected object of throughput and intra-looped modes;
Participation in localization and elimination emergency situations, Including due to sabotage and terrorist shares.
3. Responsibilities of security officers
3.1. Official duties of object protection officers are determined job descriptions, Instructions for the bandwidth and intra-looped mode and the security plan of the object. According to specified documents The competence of security officers includes:
Protection of the object and material values;
The production of inspection of things, as well as the personal inspection of workers and employees of the enterprise;
Implementation of control over the work of devices installed at the enterprise of security and security and fire alarm systems; The message about their response to the head of the guard (watchdog), on duty by the object, and if necessary, in the body of the internal affairs or to the fire unit;
Clarifying the causes of signaling and take measures to delay violators or fire elimination;
Adopting under the protection of financially responsible persons equipped with alarm and other means of protecting separate premises;
Overlapping the checkpoint when an alarm is announced on a protected object, as well as with the permission of the head of the watchdog (duty on an object), the implementation of the release (intake) from the object (on the object) of all persons;
Taking measures to prevent and suppress offenses on a protected facility, up to physical coercion;
Implementation of detention of persons trying to illegally leaving (derive) material values \u200b\u200bfrom a protected object or suspected of committing offenses and maintain them into a guard room or separation of the police;
Monitoring the operation of the security and security and fire alarm devices installed on protected objects;
Use when carrying a guard dog;
- [Enter the necessary].
3.2. A security officer in the process of execution of official duties needs to be implemented:
3.2.1. When receiving (surrender) duty:
Get weapons or special meanshaving previously checked them in compliance with the measures and rules of safe circulation;
Timely arrive at the object as part of the change of protection;
Together with the representative of the administration of a protected facility (when receiving or in cases of the objective of the object) or together with a replacing guard (senior shifts), inspect and check the object adopted under protection, bypass and inspected the controlled territory, as well as a survey of the technical strengthening of basements, Attic, windows, doors in order to study the operational situation and detect suspicious subjects. If one's detection or detection of hacked doors, windows, locks, lack of seals and seals immediately report [Head of the Security Service (Protection), another responsible person];
Check fire alarm, lighting and telephone communication;
Make sure the primary means of fire extinguishing;
Read and accept available documentation (instructions, magazines, an action plan in case of emergency situations, material values, etc.) according to OTICI;
Specify the system emergency call Police, guidance of a protected facility, rescue service and check the performance of security, emergency and fire alarms, means of communication;
Check serviceability individual means protection;
Make an entry in the journal of receiving duty, including the disabilities available on the object and violations of the security mode;
In the absence of a changeable security guard and, if there is faults and violations at the facility, which do not allow it to be protected, immediately contact the guidance of a security company and continue to act in accordance with its instructions;
Object responsible persons protected object or the next change of guards;
Make an entry in the journal about the delivery of duty and report to your immediate leadership.
3.2.2. During duty:
In the execution of their own functional duties Under the protection of the object, the guard (change of protection) must be abandoned to be abandoned exclusively only to bypass the protected object;
Constantly have special self-defense tool and communications (radio station or mobile phone);
Periodically by bypassing a protected area in accordance with the established schedule to monitor compliance with public order and maintain fire safety measures;
Bypassing the territory or placement of a protected object according to the route scheme, check the condition of window lattices, doors, follow light and sound signals fire alarm;
Establish the cause of alarm operation and take measures to detain criminals only if these actions do not weaken the regime of the protection of the object;
In case of alarm operation and when identifying any violations, inform the head of the protected facility or the responsible official, to immediately report this to the dispatcher of the security company, and if necessary, the duty of the territorial body of the internal affairs;
When identifying malfunctions (hacked doors, locks, windows, the integrity of the seals, seals, and the like) report to its direct leadership, the representative of the administration of the protected facility, the police and to protect traces of the crime directly prior to the arrival of police officers;
Ensure public order on the protected area, monitor the safety of the material values \u200b\u200bof the object;
According to the duty personnel of a protected facility on the emergence of a conflict situation, threatening life or the health of personnel or visitors, take urgent measures to resolve the situation, with the earliest need to cause police outfit;
With an armed attack on a protected object, immediately report to the police, the management of the protected object and its direct guidelines according to the alert scheme at the post. Take personal security measures and act further according to the instructions;
Carry out throughput, registering unauthorized persons in the magazine of visitors;
Make a passing of visitors strictly to the time allotted for visits, finding and skipping persons to a protected area by unexpected time, on weekends and holidays to allow only a written indication of the management of the facility with the verification of identity documents and the record in the journal of duty;
Not allowed in the territory of the protected facility of persons in a drunken state;
Ensure entry and exit vehicles into the territory of a protected object on the basis of a pass or other permits defined by the administration of the object. At the same time register in a special magazine brand of cars, the state number, the time of entry and departure;
Resolve import-export, deposition of property and material values \u200b\u200bwith a protected area solely on the written permission of the guidance of a protected object with a complete check of the compliance of the submitted (exported) property to the documents and with a record in the journal of duty;
Allow parking vehicles only on the places allocated for this, control the legitimacy of parking vehicles in close proximity to the institution. In case of detection and disobedience from the driver to report this to the duty of the police and the management of the protected object;
Perform the rules of the internal labor regulation, clearly, in good faith and strictly observe the discipline of labor, the requirements for labor protection and production sanitation, in a timely manner and accurately execute the instructions of the management of the protected object;
Having tidy appearance and be dressed in the established form with the identification signs of protection, comply with correct communication with visitors and employees;
Bypassing and inspection of the territory of the protected object, as well as to conduct a special journal, which reflects the results of inspection of the territory of a protected object, identified violations or situations that cause suspicions, the results of the technical strengthening of institution facilities, the results of service checks;
Instruct the employees of the protected object on the procedure for detecting abandoned (left) objects, mobile phones, bags, wallets, etc.;
Promote law enforcement agencies when they conduct operational-search activities in the territory of the protected facility;
To actively interact with the guards in neighboring posts or protected objects, to provide them with full assistance without prejudice to the security regime of the protected object.
3.2.3. When the explosive device is detected:
If possible, locate the explosive device;
Evacuate all people from the territory of the protected object;
Immediately report to the relevant authorities (police, Ministry of Emergency Situations, "Ambulance");
Take measures to localize (reduce the threat) of possible consequences of the explosion;
Provide isolation of the location of the possible location of the explosive device - to establish fences, shields, indicative inscriptions with a secure removal distance;
Ensure control over the possible location of the explosive device before the arrival of specialists with the necessary technical means.
3.2.4. If emergency situations occur, fire, etc.:
Immediately report to the relevant authorities ( fire security, Ministry of Emergency Situations, Ambulance);
Notify the object's manual and direct guidance;
Ensure the conclusion of people from the danger zone;
Maximize the removal of material values \u200b\u200band first aid to be affected;
In the event of a fire, take measures to extinguish: extinguishing fire with water, sand, earth and other infrident means, using the available primary means Fire extinguishing (bugs, shovels, fire extinguishers, etc.), given that the extinguishing of flammable liquids is not allowed.
3.2.5. When capturing the hostage on a guarded facility:
IN the shortest time Get the highest possible information about the reasons for the seizure of the hostage, the requirements impressed by the invaders;
Notify the nearest police station, inform the available information and, if necessary, specify the shortest route to the object. The alert of other instances and officials is carried out in strict accordance with the alert plan;
Take measures to localize the place of unlawful encroachment and allow only law enforcement officers to him;
To organize the withdrawal of employees and customers into a safe place, meeting the police officers.
3.2.6. When attacking the protected object:
If necessary, use firearms Security officer must be guided by Art. 37, 39 Criminal Code of the Russian Federation, Art. 17, 18 of the Law of the Russian Federation "On private detective and security activities in the Russian Federation, Art. 24 of the Law of the Russian Federation" On Arms ";
To submit an alarm signal using all available communication channels, to attempt to block all outputs, stop access of possible customers to the premises and take measures to reflect the armed attack;
Organize the alert of the central post of protection about the attack. An employee of the protection of the central post immediately reports that the guide that happened to the police, the management of a security enterprise, operational duty, then acts according to the instructions received;
Increase the police outfit, specify the scene, give a brief operational information, to further perform the instructions of police officers.
3.3. Protection employee is prohibited:
Take under the protection of objects not specified in the contract, the postbook, the width;
Alone or at the request of the Object Administration, open or close locks, lockable devices, doors, windows, wind or remove seals, printing. In the case of industrial necessity (delivered goods, unscheduled shipment or emergency situation), an act of autopsy (sealing) of the object is drawn up, an entry is recorded in the book of receiving an object of protection;
Move fire inventory and use it not directly intended;
Perform work not related to the protection of the object (loader, messenger, cleaner, etc.);
Disable signaling devices, autonomous alarm, lighting at the object, including when alarm is triggered;
Leave from post (object) or distracted from serving, leave a post without permission to manage the protected object and coordination with your immediate leadership, as well as sleep in the post. In the case of a sudden disease, notify the senior shift and continue to execute official duties before the arrival of the replacement;
Independently transfer to the security of the object to other persons, including close relatives.
Make any objects from any individuals;
To transfer or present any weapons and special funds, with the exception of the direct supervisor responsible for storing and issuing, approved by the order of the head of the security company, with an appropriate mark in the reception book and the issuance of weapons and special funds;
To allow unauthorized persons to an object without coordination with the leadership of a protected facility, the head of the security company, except for the cases provided for by the transmittance manual;
To inform unauthorized persons any information about the situation on the facility, password, as well as assigned pultings;
Disclosure information about the features of the object, the order of storage of values, toxic substances and the organization of protection.
4. Responsibility
4.1. Responsibility for ensuring the safety of the object is borne by [the name of the position of the responsible person].
4.2. Security officers are responsible in accordance with the current legislation of the Russian Federation and the contract for the protection of the object.
4.3. Persons who have direct access to the organization of the protection system are responsible for disclosing information on the protection of the object and the rules for using the technical means of security and fire alarm.
The job instruction is designed in accordance with [Name, number and document date].
Head of Personnel Service
[initials, surname]
[signature]
[day month Year]
Agreed:
[position]
[initials, surname]
[signature]
[day month Year]
The instructions are familiar with:
[position]
[initials, surname]
[signature]
[day month Year]
