How to make a brand from a gas cylinder. Mangal from the old gas balloon with his own hands. Mangal from the pipe and with a pipe

It is difficult to argue with the fact that relaxing outside the city on your own country is a real pleasure. After all, only in such moments of life can truly feel the freshness of nature, prepare fragrant kebabs and chat with close people.

Especially with this, residents of large cities that have to live in a permanent urban bustle. For such citizens, their own cottage behind the city is a real salvation, where they can relax from the boning atmosphere of the metropolis.

Naturally, at such a country just mANGAL is neededAfter all, it is an extremely convenient tool for cooking on fire ever invented people. Cooking food on the grill was still in the distant past, however, even in our time, many people are not averse to take advantage of this technique.

MANGAL GAS BALLON

In our time, the brand with smokehouse is an indispensable attribute of any country cottage. As a rule, a multitude of country sites may vary at home, dimensions, uniform, but their own brand with smokehouse has any self-respecting owner of his own cottage.

To reduce the cost of such a fixture to a minimum, it is best to make a brand from a gas cylinder with your own hands. Such a smokehouse will not differ from purchased in the store, and the amount of funds that will have to spend it will be the minimum indicator.

Benefits of the Manga Muga made by hand

Since the appearance of Mangals, a person has constantly upgraded its device, adding new features to it, making it more convenient and so on. Thus, from the usual frying meat on a stick, we came to the campfire to modern microwaves. Hence, assortment of Mangalov So broad that everyone can freely choose such a model that will have to do.

However, as a rule, prices for modern models Mangalov are simply beyond and not many can afford such a luxury. That is why this article was created - because many people wonder how to make a brazier from a gas balloon with their own hands.

So, below we will look at the list of advantages, as well as disadvantages of the design, which we will do:

Pros:

• Large sizes that will allow one to prepare a large number of Food for a considerable company.
• Light design, which is not difficult to make it even in those who are not tied to physical work. All you need is a gas cylinder and a few hours of time that will have to spend on creating your smokehouse.
• Maximum low cost of the manga. Such costs can afford anyone who has its own cottage.
• I. durable designwhich is able to withstand the highest temperatures. Due to this, the durability of your manga rises.
• In the case of the presence of a folding lid, the brazier does not have to be submitted under the canopy in case of rain. Plus, the mangala cover is necessary in order to use it as a smokehouse.

Minuses:

• The first advantage of such a mangala can also be called a disadvantage. The fact is that big design It is not always possible to fit into the yard of the cottage, especially if its area does not boast of big size.
• MANGAL and SPOKILLA from the gas cylinder will not be portable designwhich can be rearranged at any time in more comfortable spot. In order to transfer such a design, you will need at least 2 people.
• From raw materials that can be used as a fuel for the mangala, only coal can be used, since there are too few seats for firewood.

The process of producing a mantal from a gas cylinder

First of all it is necessary to find suitable gas cylinder. In principle, it cannot be difficult, especially for those who survived the time of refueling gas plates With gas cylinders. For the manufacture of our mangala, you will need a large gas cylinder, a capacity of about 50 liters.

Immediately I want to warn that the manufactured barbell and smoking will not have a presentable look. However, it will not affect the quality of cooking. Here is the case of taste. Of course, you can specifically equip it so that he has a neat look.

Also worth knowing that if you do not have a welding machine, as well as the ability to use them, then you will not work. In this case, the only way out will refer to a person skilled in the industry. In principle, it is impossible to call essential disadvantage The manufacturing process, since finding a competent welder with its welding machine will not be difficult.

Tools and materials that will be needed in the production process

So in order to make a brand from a gas balloon with your own hands, you will need the following tools:

• bulgarian;
• two door hinges for lid;
• a set of tools in which include:
  • a hammer;
  • screwdriver;
  • adjustable key;
  • chisel;
• drill;
• corner;
• metal pipe.

Manufacturing instructions

First of all, it is necessary to cut a balloon. This process is quite unsafe, so all security measures must be observed. Make sure the gas cylinder exactly empty and does not have gas residues.

When cutting a balloon on 2 parts, be extremely careful, because if there is a little gas in the cylinder, it can freely ignore and bring a lot of problems.

So, when the balloon is cut into 2 parts, it is necessary to wait until the remaining gas evaporates. After that, you need to flip the balloon the bottom in order to the entire condensate stack.

In order to remove the unnecessary crane on the surface of the cylinder, you can use the hammer or grinder. In the first case, it can be simply disconnected from the cylinder, in the second fully cut. The second case is less safe, so we recommend that the hammer is.

After you have made all the actions described above, you must fully pour water balloon And leave it for several days in this form. After that, work with such a design will be absolutely safe and you can do everything with it that you want.

How to make a lid?

As you could already guess, the top cover of the mangaal is an indispensable attribute. First, it is protection against rain. Secondly, it is the introduction of the smokehouse function, without which your brand will not be so functional.

So, we will make the cover for the mangaal from the already cut part of the cylinder. The lid must be cut off from the cylinder from the top of the case along the middle. It is necessary to drink it from the middle to the edge. After which it is attached to the main part of the manga with door loopsthat we have prepared earlier. Side walls need to be left.

Assembling top

When the upper cover is ready for operation, it is necessary to qualitatively attach it to the main part of the manga. For this we will need, as already mentioned earlier, door loops and drill.

The first thing with a drill drill holes under the hinge, after which they fix the latter with rivets and weld. Again, if you do not possess welding apparatus Or use the ability to use them, contact a specialist who will solve all your problems for a small fee.

Here you can develop a little. You can attach additional accessories for your mangal, for example, a handle for the lid. You can also build removable cover With the help of the axes of hinges in one of the sides.

Strengthening and fixing

In order to avoid the possibility of deformation of your future barbecue due to high temperatures, it is necessary strengthen the base of smokehouse.

To do this, all over the perimeter must be accepted metal corner. It is best to do it inside the mangala. Thus, you will kill two hares: strengthen the base and create a comfortable support for a grid or chapter from a regular corner.

Also, it is also best to make cuts to ensure that the Shampur is perfect in their place and stably held there.

Naturally, any brazier or barbecue must have its own legs. It did not go around and our case. For the legs are best suited metal pipes equal length. There must be four of them.

To secure them, it is necessary to drill in the corners of the bottom of the holes, after which we screw the legs using nuts. If after this legs of your mangala turned out to be not sustainable, weld additional hijacles from the bottom.

To top it all work - drill a few holes on the bottom of the mangala for burned coal.

RESULTS

So now you can easily do an excellent brand from a balloon own hands. Moreover, as you could understand this process does not take a lot of strength and is extremely simple.

If you come to the whole process with all seriousness and did everything right, then such a design will be able to serve you not one year. And here you can not only fry kebabs, but also smoke various products.

Believe me if you yourself make it functional product , It will serve you more than one year, which can not but rejoice.

Few departure to nature costs without kebab or grilled vegetables. To prepare these dishes usually find enough appropriate place For a fire. However, often cooking kebabs is not unremitted with departure to country cottage area or in vacation home. Many believe that the cottage without a manga is not a cottage.

If you approach the creation of a manga in the country creative, then you can still do the unique decorative elementtransforming your country plot. Make a brand can be independently using a pipe tool, such as a pipe or a gas cylinder. In this article we will tell you how to make a brand from a gas cylinder, and the photo and video will help you more clearly appreciate the complexity of the process and the result.

Types of Mangalov

Mangal - a favorite way of making various dishes on coals, which is used by many people long ago. All mangals can be divided into three types:

Material for the construction of mangals is diverse. Stationary often laid out of stone or bricks. Portable and portable make metal. When choosing a mangala, you must pay attention to some nuances:

• the material must be heat-resistant;
• must keep warmly warm;
• dimensions comply with your requests.

The craftsmen came up with a mass of Magli models, in the manufacture of which the most unusual blow materials are used. Magnifications made from gas cylinders received great distribution.

Tools and materials

It is not known who the first came up with the use of old cylinders for this purpose, but the idea justified himself. If you show a little imagination, this design will become not only functional, but also decorative acquisition. The brazier will have a fairly thick walls, which will allow him to serve quite a long time. In order to make the brazier, work skills with welding, drill and grinder are needed.

Bulgarian and welding machine

From the tools you will need:

• legs (pipes or finished mechanisms, for example, from old sewing machines);
• bulgarian;
• welding machine;
• drill;
• cylinder with a capacity of less than 50 l;
• chimney pipe;
• loops;
• rivets.

Before starting work, carefully inspect the balloon. Do not use too rusty cylinders.

Attention! Remember the safety. During cutting, the formation of sparks is unacceptable. This can lead to an explosion of gas residues.

Before cutting the cylinder, it is necessary to release all the gas from it without a residue. To do this, screw the valve with special keys, and install a balloon upside down. Wait until the gas is completely released. To control this process, use soap foam.

Unscrew the balloon valve

When the gas remains, put the sideball side and start cutting. First of all, it is necessary to cut the valve. During cutting, constantly water the water crucified water. In the resulting hole, pour water from the hose to the top. After what to drain.

Step-by-step instruction

The process of manufacturing a mangala consists of several stages.

Sawing. The cylinder must be cut into two halves. Do it needed along welded seam, as close as possible to it. The side walls are best not to cut. They will serve good flaps from the fire and will help maintain temperature. When sawing, try not to damage the side rings, because they will serve as a support for the lid.

Sawing cylinder

Legs. The height of the legs depends on your choice. You can fasten the legs from sewing machine Old sample, and you can apply pipe trimming.

The legs can be equipped with wheels for convenience of movement

To mount the pipe, you need to drill four holes in the bottom of the mantal, in which the bolts are inserted so that the carving was outside the mangala. You can either tighten with nuts, or just weld. Nuts weld to the top of the pipes and screw them to the brazier.

Council. In order for the installation of the cover easily, thoroughly fasten the brazier on Earth.

Setting the lid. The cover on the brazier is attached to the loop, which are fixed with rivets and after that weld. You can make the lid removable if the canopies are directed in one direction. It is necessary to weld the loop, because under the influence of high temperatures, rivets can simply fly out. But for mounting the handle on the mantal cover there will be only bolts. Choosing the material for the handle, remember that it should be heat-resistant. Additionally, you can make a limiter for the lid with a chain or angle. The chimney can be mounted in the valve opening.

Cover can be fixed with loops

Assembly. So that the brand is not deformed under the action of temperature, some craftsmen additionally weld the corner to the inner edges. It strengthens the perimeter and gives greater stiffness of the design. In addition, it will serve as a lattice stand and skewers. In order for the ash to be screamed with his hands, the holes drill in the bottom of the mangala. In the absence of corners of the slot for skewers are cut with a grinder.

Council. For greater functionality and convenience inner space Mangala can be divided into two zones. In one part to make a lattice coasters, and in another connectors for skewers. Install additional fixators on several levels - it will help you adjust the height of the grille over coals.

The last stroke will be coloring. This process is optional and is a personal matter of each.

Shampoo recesses Make with a grinder

Mangal-smoking

The main difference of smokehouse - tightness. A mangal-smokehouse is done in the same way as described above, but a firebox is added to the design. For this, it is spilled half the bottom - this is a place for firebox. The flake itself is made from sheet iron or any other suitable material.

MANGAL-SCOKLINA of two cylinders of different sizes

Some craftsmen make a smaller cylinder firebox. The finished firebox is welded to the brazier and get the desired design. Mandatory element Smoking is chimney. Ready chimney can be purchased in the store, but can be made independently.

Council. For those who love to improve and are not afraid of difficulties, you can advise to equip the design with a motor that will rotate spit yourself.

Smoking can be proceeded already after a mantal burned to firewood. If the smell of gas has absorbed into the balloon very much, then you will have to protrude the barbell several times, until the smell disappears completely.

Do not forget that chimney is needed for smoke

Mangal steam

The design, which is often called the "locomotive", combines four functions at once: grill, mangal, smoking and barbecue. It is performed from several cylinders or pipes, each of which has its purpose.

Externally, this brand actually resembles a steam locomotive, especially if you work out a little over its design. For example, wheels can be made of cylinder elements or use forging. Additionally, the designs are equipped with drawers with drawers, lattices, and numerous details that have both a functional and decorative role. On one locomotive, you can simultaneously fry kebabs, cook vegetables on the grill and smoke food.

Mangal-locomotive can be bought in finished videoand you can make it analogue from empty gas cylinders

Counting brands are best of all heat-resistant paint, because the mantal temperature can reach 700 degrees.

Such mangals have a fairly high efficiency. This contributes to both the closing lid and the material. Even with a small amount of coal, a well-warmed cylinder body will be for a long time to give the heat needed for cooking.

MANGALA MANGALA

Is it worth talking about external qualities? After all, with small efforts, you can implement the most bold fantasies and from a conventional unspoic cylinder to make a real work of art that will decorate the yard or country plot. And the photo and video to this article will help you better understand the manufacturing process and, maybe choose the design of your manga.

MANGAL-SPOKLINA OF GAS BALLS: video

Bar Gas Ballon Handers: Photo

An unusual brand, made from a gas balloon with his own hands, is almost no diffant on the functionality from the mangals made by modern technology. Among other things, the brazier from the gas balloon wins in the material component, because For its manufacture I will not need to buy special materials. Consequently, the brazier from the balloon will cost much cheaper, if compared with the purchase of new equipment. A barbecue will allow you to prepare excellent kebabs. It remains only to find out how to make such a mangal with her own hands so that he fully fulfilled all the duties assigned to him.

Mangal from a propane balloon: preparation for work

You can make a brand on your own. Before

in total, you need to prepare materials and tools for work.

The basis of this barbecue will be the used metal gas cylinder, the container should be at least 50 liters, otherwise the design will be too miniature.

Also, the smaller length is not too convenient for stirring coal.

To make a barbecue from the used cylinder for propane, you will need the following tools:

• welding machine;
• drill;
• bulgarian;
• metal hacksaw.

The first thing you encounter in work is cutting the cylinder. Even if it is empty, there are still a gas pair inside, so in this matter it is necessary to be as cautious and clearly follow the installed instruction.

For the manufacture of mangal from the cylinder, you will need a cylinder with propane.

If there is still gas inside, it must be launched. To do this, turn the balloon upside down and twist the valve. You can and do not hear the sound of the gas. To understand that the process actually goes, wash the valve inlet. Confirmation will serve as a soap foam.

Next you need to do as follows. Turn the gas cylinder on the side. With the help of cutting on metal spire brass valve. The incision must be performed "under the root". Brass is a fairly soft metal, so the sawing process will pass freely. During the spill of the valve, you may be needed using the second person. It will have to pour water to the place in which the cutter is performed. It is necessary in order to prevent fire, which can be provoked by sparks.

After the valve is a spile, the cylinder must be filled with water. Pour water with a hose for watering or through a funnel. It is necessary to fill the entire volume completely. As water accumulates, shake the balloon: so the condensate will be more effective from its walls.

Mangala scheme from cylinder.

After the gas cylinder is filled, drain the water. If possible, do it away from home, because From water can come nasty smell Gas stored for several days.

The final stage of the creation of a mantal from a cylinder is its sawing. As a rule, the thickness of the metal does not exceed 3 mm, so it is easily cut with the help of a grinder. Such is the standard procedure for the preparation of the container in which combustible materials were previously kept.

Production of a barbecue from a gas cylinder: Step-by-step instructions

After sawing the cylinder for the manufacture of a barbecue will be used only 1 of its part. To organize a port of air, a barbecue from the gas cylinder must have holes. Therefore, you need to do holes from the sides and in the bottom. Brew metal legs. Legs can be made of simple metal pipe. The height of the legs is from 20 to 27-30 cm. A similar barbecue will be without any problems to fit into the trunk of the car.

The side walls of the cylinder protect the brazier from the inflating coal.

The side walls of the gas cylinder are better to leave: they will protect coal from wind and will prevent their inflating them.

The cylinder needs to be cut around the edge, directly near the weld. Under the seams of the propane cylinder there are base rings installed by the manufacturer. You do not need to cut these rings. They help to properly dock the housing and the bottom of the product, performing the role of the shelf for the barbecue cover.

After cutting the cylinder you will receive 2 separate elements. On one, the loops are put and fixed on rivets. Base and welding simultaneously quite difficult. A little later, the loop must be welded to the lid and the body, since aluminum rivets will not stand for long use, and the lid will definitely fall off.

When preparing for work, be sure to consider that the mangala must have metal handles. It is impossible to make handles from wood, because They quickly splamen from street moisture, burn or come into disrepair from some other effects.

On the entire perimeter of the gas cylinder's cutting cylinder, breed metal corner 32x32. It is needed for fastening the legs. Also, the corner will perform the function of a kind of frame and will help protect the product from deformation under the influence of high temperatures. In this work, it is very convenient to use a clamp, with which the metal of the housing and the corner can be pressed to each other without any gaps.

Welding is performed on the area near the loop. Metal corner will relieve a barbecue or skewer lattice.

After that, to the future Mangalu from the cylinder, you need to fight legs. It is best to make them short so that the product can be convenient to transport. In the future, when such a need appears, the legs can be easily increasing to low length.

The loop to the lid and the body must be welded in one direction. In this case, the lid can be removed. If you need a non-removable option, the loops should be welded towards each other. After that, the lid is installed on them. The length and angle are measured, and the limiters are installed that will hold the lid.

At the bottom of the cylinder, you can fix an extra corner, which will connect the legs of the mangal among themselves. This will provide additional stiffness of the structure.

At the next stage, holes are created through which in the process of using the mantal on the destination will be saturated with burned corners. Through the same holes, it will be possible to release the structure from the water that fell into it. They will provide ventilation and thrust in the process of burning. With the help of a grinder, holes for skewers are made. If you make a brand with a non-removable lid, then you need to do the drilling before the cover is installed.

Brand from the used balloon in his functional characteristics Not inferior to the product industrial production. High temperatures There are no effect on the shape of the homemade manga. The thickness of the walls of the propane balloon is sufficient to withstand the test of high temperatures.

The high efficiency in the work of the self-made mangala provides the iron cover, which can be closed and ensured the necessary heat even with a small amount of coal. The material perfectly holds the temperature, gradually giving it in the process of cooking.

When cooking a kebab, a sufficiently large amount of smoke is distinguished, which extends to all sides. It delivers certain inconveniences. You can solve the problem with the help of an inlet tube, which can be easily attached even to the homemade barbecue from the cylinder. For this, a small part must be closed with a special smoke collector of the pyramidal form. A tube height from 2 to 3 m is attached to the smoke collection. This will ensure good thrust that will contribute to the care of smoke to the upward.

In order for the brand from the used balloon, it can be used even in the rain, you can build a roof over it. The amount of this kind of structures is almost infinite. The roof can be a bartal or semicircular, heavy or light, with a pipe or without it.

How to decorate a mangon from a propane balloon?

You can make a comfortable and simple brazier from the balloon with your own hands in just one day.

It is not at all necessary to make the Mangal independently looked like used barrels on the legs. The preparation of a delicious kebab is a special ritual, and not the usual meal procedure. So all the attributes should deliver the pleasure of one's own appearance.

When planning the creation of a mantal from a gas cylinder, you must think about how and how can you decorate the newly created design. Often enough metal mangaly Equipped with additional shelves, where you can easily arrange dishes with meat. As additional decorations, holders for skewers and devices for other skewers "accessories" can be performed: instruments for casting coal, water tanks, cleaning devices, etc.

Barbecue can be decorated with various wrought-iron elements that need to be ordered separately. You can make a lid or legs with various steel curls. For stationary mangal, you can buy cast cast iron elements. As a result, it will turn out a very original design.

Mangal is needed to everyone. Someone suits monthly trips to picnics, someone is preparing fragrant meat on its plot. Such a rest is always pleasant and useful, because beautiful landscapes and fresh air Give energy charge and have a relaxing effect. But there are no means for the purchase of a manga, because you can not be called a cheap design. But if there is free time, then the old gas cylinder can turn into a good brand. IN this material collected drawings, scheme, video footage and step-by-step instruction On the manufacture of a manga from the gas cylinder - all this will help to understand a simple job.

We will explore three varieties of a gas cylinder-based mangala:

• standard MANGAL;
• mangal steam locomotive;
• mangal-smoking.

Preparation of instruments and materials

To work quickly, you need to take care of the presence of necessary tools and materials. For the manufacture of the manga, we will need:

1. Welding machine.
2. Bulgarian.
3. Several clamps.
4. Metal pipe.
5. Electric drill.
6. Dense metal sheets to add structural strength.
7. Aluminum rivets.
8. Loops for cover.
9. The base of the mangala is a cylinder with a minimum of 50 liters (if the balloon is less, then the coals will inconveniently turn over).

The photo shows the main aggregates for the manufacture of the manga.

IMPORTANT! Safety should stand in the first place, so the sawing of the cylinder can be passed only when all gas came out of it.

Removing the gas is performed simply: the balloon turn over the bottom of the bottom and twist the valve. Gas is heavier than air, so in this position it will go intensively. To see, the process is underway or not, you need to wash the hole of the valve. If bubbles appear, it means that gas comes out - we are waiting for the completion. For confidence at the end, the cylinder can be completely filled with water so that it was washed away the last remains of the gas.

Production Process: Instruction

When the cylinder is empty, and all required tools Lying at hand, you can proceed to work:

After drilling holes, the manufacture of mangal can be considered complete. Clear to clean it and protrop it several times that the smell of gas is completely weathered. As for the paint, this is an optional stage. Some home paint the heat-resistant coating, others skip this step. Anyway, after a few lunches with a good barbecue, the brazier will burst and will be black. To increase the thrust it is recommended to set the chimney: in the end of the mantal design is cut round holewhere you can privar the usual drain pipe Suitable diameter.

On the bottom of the mangala, you can put a couple of cast iron grate. They are used in bourgear stoves and various boilers. By setting these elements, an additional ventilation will be inside the manga. Red-colored grains help save coal, as they also participate in the process of cooking meat. It is possible to place a barbell in a brick gazebo or open.

For convenience, the inner zone of Mangala is divided into two sectors. In one, they make protrusions for grilles, and in the second cut slotes for skewers.

As the tests show, the thickness of the car balloon is quite enough for normal functioning - the shape of the mangala is preserved under the action of high temperatures.

Features of the feet of mangala

The legs are the basis of the homemade manga. Before making them, consider whether you can carry a brand or it is created only for use on the site. If we are planned from a picnic, then you should take care of folding legs. Initially, you can fight four short foundations, which can later be put on a higher design.

Produced legs are usually made of durable pipes. You can fix both welding and bolts: drill holes and put the bolts there. After installing the legs, the bolts can be tied with nuts or use welding.

Mangal-smoking

Taking advantage of the instructions for creating your own hands of an ordinary mantal from a gas cylinder, you can make a smokehouse. The main difference in the design is the presence of firebox. Also smoking should be hermetic. At the bottom of the cylinder, the band is cut off, then it is necessary to cut off half the bottom of the cylinder. As a result, we will have a firebox space. It is manufactured from dense iron sheets - 2-3 millimeters.

The element is welded to the bottom, after which we get one piece design. Also for mangal-smoking, a pipe is required through which smoke will go. This part can be purchased in the construction market or make from a cylinder with a smaller diameter. Some craftsmen even install the motor, whose task is to rotate a spit with meat.

The design must be coated safe, but with the heat-resistant paint. You can start cooking after the calcination. Sometimes it is impossible to destroy the smell of gasoline from the first time.

Mangal steam

If you make an ordinary mangal with your own hands - this is a few hours of work, then not one week can go to the creation of a cargo locomotive. it decorative productwhich includes brazier, barbecue, grill and even smoking. The brazier was called the locomotive, because it looks like it really looks like it, especially if the pipes are used in the designs of different diameters. Masters make real masterpieces using several cylinders.

If a standard gas cylinder can be taken for the base, then barrels and main pipes are suitable for the remaining elements. Wheels can be made of cut cylinders, but to add originality, you can take forged elements. The carbon locomotive must be completely covered with heat-resistant paint. For these purposes, they take a coating with a temperature chapel in 700C °. The paint needs to be updated, the gaps depend on the frequency of use of the mantle.

Forged details allow you to breathe life into the design of cylinders. The masters are assembled to them pull-out lattices, comfortable tables, functional and decorative elements.

The locomotive is not only a dick that attracts attention to your site, but also an excellent design that allows you to maximize short term set the table.

If you decide to take on the manufacture of a mantal from a gas cylinder, then it is worth thinking if you are well posted with welding and a grinder. This is a rather complicated process, therefore, with an inept handling of the tool, the result can only disappear.

W. homemade design There are several features. Take them note before the start of the work:

• if you do not apply a heat-resistant coating, then you can greatly burn about such a mangal;
• a balloon after several "sessions" with kebabs will burst, so for transportation you need to take reliable packages or polyethylene film;
• the design should be stable, but not heavy, so you need to calculate in advance which supports to do for the manga;
• you can use only coal as a raw material, since there are too few spaces for firewood.

Drawings and video materials

The drawing shows a brazier-furnace from the gas cylinder:

This diagram of the drawing should help you understand what the Bar Gas Ballon is present:

Mangala-locomotor work scheme:

In this video simple language It is explained how at home to build a brazier from a gas balloon with their own hands:

The video instruction below will help you make a mangon-smoking:

Many of us often remain gas cylinders. They are made of enough high-quality metalwhich sometimes just sorry to throw away. In order to start work, you will need a similar container of 50 liters. It often remains from propane.

A little about security measures

You can not even suspect about it, but there will be gas remnants inside. Of course, it is impossible to start working with them, it is necessary to get rid of. To do this, simply open the container and leave it for several hours. Just be sure to make sure there is no fire nearby. Also, after all, we rinse the capacity with water. She will save a cylinder from gas residues finally. You can also use chlorine or lime to cleanse. True, after that, there may be an unpleasant smell. But it is easy to remove it. It is enough just to hold the product over the fire for a while. Wait until the paint burns out.

Work process

From the received cylinder, you can easily make a portable compressor station. Surely you have a large number of wheels in the farm. Their from time to time must be rolled. So such a homemade invention will be as impossible. Small wheels will make such a station as mobile as possible, you will not have to carry with you tremendous tires.

In order to start work, it is necessary to initially find the gearbox, the maximum pressure of which will be 2 atmospheres. With him, even children will infant wheels without any problems.

Next, you can easily build a stove. She will perfectly cope with the workshop heating. To create it, one only burner is needed, which can heat up to 140 degrees and a small chimney. By the way, with such a device it is possible to easily dry nuts and make some more manipulations. Look at the photos from below, how it all looks

From an interesting one should mark the rink for the garden. You can also use it as track equalizer. For this, it is fairly simply to prepare a special iron basis for which you can easily hold. You can make such a rink just per hour, or even less. It all depends only on how quickly you will find the iron handle.

Lovers of relaxation in nature can also be satisfied. In particular, you can make a high-quality brand. To do this, just cut the top. By the way, it is possible to make a smokehouse without any special problems, combining several cylinders at once. Look at the bottom to the photo. It looks quite attractive.

By the way, if you have any parts from the cylinder, then in no case throw them away. From half it is possible to make a rack for the burner. Just need to make several small legs. You can also use part of the sidewall. It should be used as protection for sharpeners.

As you can see, there are many options. If you do not have a desire to do something complicated, then you can, for example, make an ordinary balloon from a balloon, decorate it. In general, it is enough just to show your fantasy. Do you have piglets? Then just make a trough for them for feed. This is a great opportunity for savings.