How to do real lysun. How to do at home lysus. Slide from Foam for Shaving - Sea Wave Colors

Welcome to you, friends!

Any child, and sometimes even an adult, it is interesting to play with such a fun toy like lysun. It is also called Slim or Heydgam. Among children is a very popular fun. Have fun to throw and watch how it spreads over the surface.

But it is absolutely necessary to buy lysus, which is made of chemicals. After all, it is unsafe for the health of the child. Make an independently unusual toy with your own hands very simple. The manufacturing process does not have to spend a lot of time, and it will be required to be the minimum of components that have each in the house. This allows literally in five minutes to make a toy that will delight kids. How to make lysuun at home? We offer recipes to choose from.

From the glue of PVA and starch

Components that will need:

25 grams of plow glue (as much as possible);
food dye (not a large number of);
70 grams of liquid starch;
tight polyethylene package.

In the package, mix the dye and starch. If there is no food, you can use paint, green and beet juice. Do not add a large amount of dye. This will lead to the fact that during the game from Lizun, traces will remain. If there is no ability to use liquid starch, then you can breed the usual in the 1: 2 ratio.

Next flows glue, the package is closed and tied. All components are well mixed before the formation of a thick homogeneous mass. The excess fluid merges, the content is wiping. Lisun ready! You can safely play the resulting toy. In order for the lysome, dust was accumulated, it is recommended to store it in a container that closes tightly. He will serve about a week.

Perhaps the first time it will not work, but do not despair. The main thing is to comply with the proportions.

From food soda

Children can play such a toy only under the supervision of an adult, as the composition enters detergent. After the game, you should well wash the hands of a child.

For the composition will be required:

baking soda;
water;
detergent;
dye of natural origin.

Mixed in the prepared container detergent, dye and water. Then the soda is added and mixed well. The mixture should turn out sufficiently thick. If the consistency is too thick, then you can breed with water. An entertaining toy is ready for the game! The only note: It should be carefully monitored that the children do not take lysuine into the mouth.

From flour

This method of leasing is perfect for young children. If you use a dye of natural origin, the toy will become absolutely safe. Of course, natural dye is not distinguished by brightness and saturation of color. But the lysun with the content of such a component will not harm the health of children.

Required components:

¼ cup hot water;
¼ cup cold water;
400 grams of any flour;
a little natural dye.

In a small bowl, pushing the sifted flour, first the cold, and after warm water. In no case do not use boiling water, otherwise it turns out an ordinary hitch. Mix everything thoroughly until the lumps and the mass does not become homogeneous. Add dye and mix again. As a result, a sticky mass should be turned out. Put a mixture for 4 hours in a cold place. When the mass cools and acquire the necessary form, you can give it to children for a fun game.

From washing powder

Make such a lysun is very simple. The only thing instead of a bulk powder must be used gel. Other funds, such as a shower gel or liquid soap, will not be able to replace it. Their compositions include completely different components.

For the manufacture of lysus, you must take:

¼ cup of stationery glue;
70 grams of gel powder;
patter of natural origin;
latex gloves;
bowl.

Glue poured into a bowl. Its quantity can be increased or decreasing. It all depends on the desired size of the toy. The dye is added and stirred until a homogeneous color is obtained. Then the powder is added and is thoroughly mixed again. Mass should be a sticky and remind a putty on the consistency. If the mixture is too thick, dilute with several powder drops.

Next, put on gloves, the mixture is removed from the bowl and smeared well as the dough. In the process, the mass acquires elasticity and softness, and all excess fluid flows. That's all! Such a lysun is stored in a container with a lid. If he started to fit, put it in the refrigerator.

From shampoo

Also a simple option. Components:

any shampoo;
dishwashing liquid.

The same number of required components is mixed in a predetermined container. Additional substances should not be present in the ingredients, such as grains, as in scraping. The color of the toy will directly depend on the color of the materials.

The ingredients are thoroughly mixed and removed into the refrigerator at least a day. When the mass acquires the necessary consistency, you can play lysun. Keep such a toy only in the refrigerator. Otherwise, it melts and loses the form. You can play lysun about a month. It is necessary to carefully follow, so much dust has accumulated on it. If Lizun became too dirty, it will have to throw it and make a new one.

From alcohol and boracs

To make a toy need:

water;
polyvinyl alcohol (dry powder);
sodium borate;
dye.

Surely many scares the Borax component. But you do not need to worry, sodium borate is freely released in all pharmacy points.

So, the powder is poured into the enameled dishes and divorced with water, following the instructions in the package. Just do not need to breed all the alcohol immediately.

It is placed on fire and heated about 45 minutes, stirring constantly. Then get cold.

In a glass of warm water, 2 tablespoons of sodium borate are divorced, wait until Crystalline is dispelled, and strain.

Components:

half of the teaspoon of borcs;
30 grams of glue;
1.5 glasses of water;
iron oxide;
dye.

Borax dissolves in a glass of water, in a pre-prepared bowl. In a separate bowl, the remaining water and glue are mixed. Paint is well mixed and added. To get a glowing lysun, instead of an ordinary dye, you can add phosphoric paint.

A solution of borcs in diluted glue is very careful, constantly and carefully stirring. When the mass acquires the hardness and the desired consistency, viscosity, it is necessary to stop pouring the borate solution. Its remaining part should be poured.

Lisen made smooth on a flat surface. In the middle, pour out a small amount of iron oxide and knead well until uniform is formed grey colour. Magnetic toy is ready. When a magnet makes leasing, he will begin to reach it.

Why can Lizun fail?

There are cases when everything seemed to be implemented according to the instructions, but the fun toy still does not work. It depends on the constituent materials that are used for lysuine. All ingredients differ from each other, and significantly. For example, different manufacturers. Because of this, as a result, it turns out quite differently. Therefore, there is no need to strictly follow one or another option. The amount of materials used may differ significantly. If it did not work out lysune at once, you can try again and again. Especially the process does not take much time.

Properly made lysun should represent a homogeneous mass and easily remove from the bowl in which the components mixed.

In the case when the toy sticks hard to the palms and is poorly removed from the surface, it needs to be slightly diluted with starch or water.

Lizun (Handgam) is a popular jelly-shaped toy, to the touch similar to soft rubber. Children, and adults play with pleasure: stretch, cool, break and glue back. And she appeared thanks to the cunning and voracious hero from the cartoon "Hunters for the leadership" - green bringing, which was so called - lysun.

Do you like this character too? Then do Handgam yourself by connecting to the work of your son.

How to do at home lysus using borants

There are many ways to manufacture lysus, consider the most popular. You will need:

100 gr. White PVA glue;
breaker Bura - Sodium Tetraborate, Sold By Pharmacy without a recipe. There is still a bora in powder - Borax, is also suitable, but it will have to breed it with water, according to the instructions on the label;
zelenka, gouache or food dye - to give the desired color to the Lysunchik;
capacity, wand for mixing, napkin.

Everything is cooked, begin to make:

Share the bubble with glue and pour the contents in the jar. Add 5 drops of green tsight. Stir.
Pour in a mixture of 1 tsp. Boers and carefully disperse for five minutes. In the process of work, you will need about 4 spoons of sodium tetraborate.
Put a viscous substance on a cotton cloth so that an extra moisture is gone.
A few minutes later the mass will connect. Remember her good hands - a toy is ready.

Tip: Store Lizun in a cool place so that the sun rays do not fall on it.

When a child plays, remove the lysus into the package, pull the rubber band.

How to do at home lysen from starch

If you failed to find a solution of borants, make a toy from starch.

Divide 4 tbsp. l. Potato starch in 1/2 cup of water. Measure 100 ml of the resulting solution and pour it into the cellophane package. Add 4 drops of liquid blue for color.
Enter 3 tbsp in the mixture. l. PVA glue. Mix the content with your hands before the formation of a dense bunch.
In addition to the thick mass in the package, water will appear, so remove the lysuine and blot it with a napkin.

Such a toy will serve for a child about a week. Keep Handgam in a jar with a lid so that it will not be covered with dust.

How to make lysun at home from shampoo

Funny lysuuna can be made from an ordinary shampoo, with the addition of dyes and polymer glue, type "Titan".

Pour 100 ml shampoo in a bowl, add the food dye - 0.5 teaspoon, mix.
Connect the painted shampoo with 4 tbsp. l. glue.
Pour the liquid into the package, mix your hands to the desired thickness.

Remove the resulting substance, possess storage in the closing container.

How to do at home lysus from food soda

It is quite easy to make lysuine with the use of soda, however, it will turn quickly quickly. Prepare: a half-table of water, 100 ml of PVA glue, dye, water - 50 ml, 2 cups, wand.

Pour glue and 1 tbsp into the first cup. l. Water, add dye. In another cup, stir the soda with the remaining water until uniformity. Place the mixture in the bowl from different tanks. Break 10 minutes until the lysun thickens. Roll off his kolobom, give the child - let him play.

How to do at home lysen from alcohol

This unusual way implies the presence in the house not only the boos, but also a polyvinyl alcohol - powdered thermoplastic polymer.

Mix 1 tsp. Dry alcohol with 250 ml of water, put on a slow fire, half an hour. While the mixture will cool, dissolve 2 tbsp. l. Sodium tetrabrate in a glass of water. Mix alcohol and boor 3: 1, send the dye there. Stir up to the required consistency, cool, use.

Many ideas, what you like, choose. In any case, you make an unusual toy that you will enjoy the children and come in handy. Having come from working with a terrible mood, frow leasing in your hands, cut the face out of it, in the end, smear it along the wall, and all the troubles will seem full nonsense.

Evgenia Smirnova

Send light in the depth of the human heart - here is the appointment of the artist

Lizun, or as it is also called, Hendgam, slim, became a popular toy in children in the 90s, when the film "Hunters for the leaders" appeared. This hero could take any shape, was a slug and not quite pleasant to the touch. However, this fact did not confuse children, but the content of sodium tetraborate in a toy from the store stopped many parents from the purchase. Did you know what to make such a toy is very simple? About how to make lysun without sodium tetraborate, numerous videos will be told. This secret you can learn from this article.

How to make lysuun at home

There are quite a few ways to make lysuan from healthy materials at home. To create it mainly used:

water,
shampoo,
paper,
soda,
starch,
flour,
Persil
boric acid,
baby powder.

Due to the fact that you independently create a toy, you can control the entire process and the composition of the product, giving it the color and size that you consider it necessary. Such an occupation will like your child, and you, taking it with the basics, you can get a few minutes of free time, while the kid will independently try to create his own lysun.

From the water and shampoo

The homemade leaser will easily work out with the help of water and stationery glue. How? Yes, very simple. Below, the instructions will help you in this process. To begin with, you will need:

pVA glue - 100 g;
any dye you need shade (gouache, green);
water room temperature - 50 g

For cooking:

Pour water temperature water into the cooked dishes.
Add glue. Please note that the slide is completely dependent on the quality, as well as the amount of glue thickener.
Pour the entire bubble of the sodium solution of the tetraborate, add a bit of a dye here.
Take the cellophane package and pour the mixture there. Pretty fright all the components.
Your Hendgam is ready!

The lysun of the shampoo without glue PVA is simply made, but requires more careful storage. To create it, you may need:

shampoo - 50 g;
tool for washing dishes - 50 g.

For cooking:

Pour both tools in the prepared container and mix. Please note that the color and consistency will fully depend on the selected components. If you need a transparent lysun, then the shampoo with a dishwashing detergent must be appropriate.
Mix the components and remove the mixture on the refrigerator. The next day you can play with a new toy.
Handgam needs to be removed after the games in the refrigerator. Get rid of him immediately, as soon as many dirt and dust sticks to it.

From plasticine

Beautiful toy for a child can be plasticine handgam, which is done quite simply. You will need:

gelatin - 1 bag;
a piece of plasticine;
water;
plastic bowl;
metal container;
spoon for mixing;

For cooking:

Add the gelatin to cold water, leave an hour before complete dissolution in the metal bowl. The proportions often indicate bags with gelatin.
An hour later, place a bowl on the stove and wait for the boil.
Take a piece of selected plasticine and remember it in your hands.
In the plastic container, pour warm water (50 g) and mix thoroughly with the plasticine until the formation of a homogeneous mass.
Add a slightly cooled gelatin to the plasticine and mix thoroughly with a spoon.
Handgam will be ready for games immediately as soon as cool. Today you have learned how to make slim without glue PVA.

From paper

For some reason, many believe that if the toy is done with their own hands, then it is necessary to use paper for it. Handgam is unlikely to have paper sheets. Otherwise, how would he be stretched and sticking to everything, which touches? Let's open the secret for those who believe that everything is done from paper: it is impossible to prepare a sticky toy from this material. The only thing that can bring you closer to Lizun from paper is his picture drawn on a sheet.

From soda

You can not believe, but the color mucus, which the children are used to calling lysun, is easily prepared with soda. Such a toy becomes an indispensable assistantIf you need time for homework, since the child will surely pass it for a long time. When creating, nothing needs to glue, saw or cut. Only mix required ingredients:

pVA glue - 50 g;
water - 100 g;
soda - 1 tbsp,
dye;
mix for mixing;
a spoon or wand for mixing (rubber gloves, if you do it manually).

For cooking:

Mix half of water with glue in a separate dish. This is boldly add the selected dye.
Divide the soda with the remaining part of the water.
Connect both solutions and mix well before the formation of a homogeneous mass.
Toy is ready, and your baby is happy!

Please note that such a lizunchik is kept no more than a week. With an intense game, it is advisable to change the Handgam to the new one after 2-3 days.

From Stachmala

Another simple way how to make lysun without sodium to netroduct, contains the minimum amount of ingredients in itself:

water;
starch.

In this case, use potato or corn starch. For cooking:

Just mix in equal proportions two components and add the dye you like. It will also help you even green.
Form the ball from the resulting mass and you can enjoy the game with a new leasing.

How to care for lysome

In addition to the fact that you need to know how to make lysun without sodium, a separate item should be distinguished by the care of this toy. The mucus often attracts dirt and dust to himself, so after the game it is best to rinse under a jet of water. Make sure that it is not too hot. Some lysunov who are made with their own hands should be sent to the refrigerator immediately after the game. If you see that Lizun has accumulated a lot of dirt and dust, then it is better to get rid of it and make new toy For your baby.

How to increase lizen in size

One more cheerful game - It is to increase Handgam in size. Children know how to make Lizuun big better than you, but let's enter the course of the case and find out all the secrets of this simple toy. So that Lizun becomes big, it is necessary to remove it for the night in the fridge in a jar with water. Tightly close the container and remove. In the morning, as soon as you wake up, run to check your "cub". He grew up! Tell your baby how to grow lysun on your own, and ask a peculiar report every day.

Familiarize yourself from plastic cups for the new year.

Video about lysuns without sodium tetraborate

In this section you can see the full process of creating a toy and understand how to do lizun with your own hands. The ingredients that are used will necessarily find in every home and the question "What is Lizun and where to buy all the components?" Immediately disappear. Please note that no sodium tetrabater here does not have any speech. And this means that is safe for your child. Liquid lysun will necessarily become a favorite toy in your home!

Lysun do it yourself

Lizun, or "smart plasticine", or handgam - multi-colored semi-liquid mass, which quickly changes its shape from touching, twisting or movement. For the first time, such a toy for hands was created in 1976 in the United States, and was specially popular in 1984, after going to the screen of the film "Ghost Hunters", where the main character was ghost named Lizun. "Smart Plaindle" due to its unusual structure very attracts the attention of children to create unusual fantasy compositions, and can also be used as a hand massager and is useful for the development of small baby motor. On the store shelves, you can find a large number of lysunov from various firms, but it is much more interesting to independently create this unusual liquid mucus.

How to make lysuana at home

From English Handgam - ("Hand" - hand, "Gam" - Zhvumka) - Hand gum. Before you begin to create this unusual toys, you need to understand how about the structure should turn out. So, the lysun should be semi-winged, fluid, but perfectly hold the form with all sorts of movements. You can compare it with a polyethylene package, which filled the water and closed tightly. Lisun is liquid, but perfectly performs all your instructions. Do not believe? Check out!

In order to create lysun at home, you will need:

PVA glue (white color)
Bura (sodium tetrabrate) or Borax powder
Food coloring
Plastic or Glass Capacity
Wand for mixing

Before starting to mix the components, it will be useful to know the ratio of the boos and glue in advance so that it is not to suffer and not add a different amount. Per 100 grams of glue requires 1 jar of borants. Remember it. Accordingly, if you want to make Lizun big, then you will need not only more glue, but also more sodium tetraborate.

In the dishes, pour the required amount of glue. Add a few drops of greenfoot or food dye there (on your choice), you can even connect both. The main thing is not to overdo it, otherwise not only lysun will be color, but also your hands while playing with him.
Mix thoroughly. Next, add to the Buru solution. Do not think that the whole bottle of 100 grams of glue will be unreasonably much. If this ingredient is not enough, the lysun will adhere to any surface, leaving unpleasant traces.
Mix very well again. As a result, a jelly-like mass should be turned out.
In order to remove all the water from the Handgam surface, you must put it on paper (clean) and ride it for some time.
Almost the finished mass put in plastic bag And once again, be good. The longer, the better, but the approximate time is 5 minutes.

Such an unusual lease will be interesting not only because of its structure, but also due to the fact that the structure at first glance is attracted by a magnet. To create magnetic handgam, it will be required, in addition to the ingredients already listed (PVA, booster, dye glue, and iron oxide. But if you want a toy and shone in the dark, buy phosphoric paint.

In one container, mix the glass of water and a 0.5 teaspoon of bours. All the mixture must be thoroughly mixed so that the powder is completely dissolved in water. These are secondary ingredients that will be needed to activate the main composition.
In the second dish, mix one glass of water and 30 grams of glue. It is worth noting that a special dimensional spoon will also be required in this recipe, it is better not to work on the eye, otherwise the result may not justify your expectations. If the whole solution mixed well, add the phosphoric paint and another dye there (you can also use the other, naturally in moderate quantities).
The first prepared solution is gently pouring into the second, while stirring the second composition. Immediately after notice that the lysun becomes thick and acquires the desired consistency, stop pouring the first solution and mix it all thoroughly. If the dilute water drill remains, it can be calmly pouring into a sink or trash can.
I will distribute the ready-made mass on the table and right in the middle, pour the chipping of iron oxide. Pretty mix the composition until it acquires a homogeneous color. If everything happens, play health! When making a magnet to Handgam, it stretches to him, as a real ghost from the film "Ghost Hunters"! An unreal spectacle that pleasantly surprise and young children, and even adults!

Useful tips that will be useful when creating Hendgam

If you are going to create a useful and interesting toy for yourself, you may need advice that will guide you on the right path. So:

What if the lysun turned out too watery and spreads his hand?
If you notice this, then you drove water or added little bora. Do not worry, re-read the first way and re-on.

When stretching, lysun is divided into threads and does not succumb
So you added a large number of borants. Dilute the solution with glue or very slightly water.

Handgam hardened. What to do?
This question is one of the most popular, since many do not comply with the rules for storing the toy, on the joy that they have such an interesting and unusual composition. Once again, it is worth noting: Store Lizun is necessary in a tightly closing jar or polyethylene package. If you notice that Lizun began to harden, just put it on the night in a jar with a few drops of water, in the morning he will be like a new one!

Unlike shopping hendgam, the independently cooked toy contains the most minimal amount of harmful substances. For example, there is no silica, titanium dioxide and many more chemical incomprehensible words. Such a lysun is not poisons and is not toxic, and the result exceeds even the store analogue! Play Health, Experiment and create your Handgams!

Video: how to make lysun do it yourself

Handgam ("Handlers"), slim or more common version of the name of the toy - Lizun adore children of all ages. Although fashion began for a long time, but today it does not pass, popularity is only increasing. Equipped color substance, according to physicians, helps calm down, establishes neurohumoral processes in the children's body, develops the motility of the hands and opens the creative talents of young tanks. In order not to buy ready, with an incomprehensible toy, thoughtful parents Consider options how to make lysune yourself. Several simple "recipes" of preparation - in our article.

The most common option that looks exactly the same as popular toys on the shelves of children's stores, is a lysun with sodium salt boric acid (It is also called a bora or sodium tetraborate).

To make it, except ½ teaspoon of the main component, the following components are needed:

30 grams of stationery glue, better transparent;
half a glass of water;
dyes different colors (safer food);
two small containers.

Phased cooking:

In the first container, pour 1 glass of water with a temperature of 30 - 36 degrees, add a died out of the drill, mix thoroughly until it becomes homogeneous.
The second vessel must be filled with the remaining water (0.5 glasses) and glue, add 2 to 4 drops of dyes (it is better to choose two - three colors, no more). Mix to homogeneous mass.
Take the first tank in the hands and, slowly tilting, pour the mixture with a thin jet with a tetraborate to the second sudine.

Transformation will occur right in front of: from liquid state All components will turn into one entire of a durable substance. Such a lysun is ready for different experiments who like to hold children so much.

Only parents should carefully ensure that the child does not pull the slide into the mouth. After all, a toy, although done at home, has a chemical composition.

From water and starch

Those who are looking for a recipe with safer components will suit the Handgam version without sodium tetraborate. There are several types of cooking "manual chewing".

Materials for the first way:

potato starch - 200 g;
fullack warm water;
½ teaspoon of food dye;
enameled capacity.

How to do:

Fall asleep the starch and dye, mix them.
We gradually add water to the mixture, and it is necessary to constantly stir the content.
The liquid will change the consistency gradually in the process of stirring: from light jelly to elastic jelly.

Since there are no chemicals in such a lysome, but also "lives" toy for a short time. Two days later, she will come into disrepair and will have to make a new slider.

For the second recipe for Lizun with starch, you must take:

liquid starch, which is bought for washing, - 70 ml;
white PVA glue - 25 ml;
natural dye (can be gouache paints);
high density polyethylene package.

How to make slim:

Pour starch in the package.
Add 3 - 4 drops of dye, no more, so that in the process of the game the paint is not on the hands of the child.
Pour glue into a mixture, tie a package.
Intensively shake it, mixing the contents, until a large clutch appears among a minor amount of fluid.
Drain liquid, remove the weight, getting into it paper towel. Lisun ready!

Such manual creation is suitable for the game 7 - 10 days, if you store it in a closed ass.

Production technology from toothpaste

This method allows to make a particularly dense and driving lysun, and besides relatively safe.

Required ingredients:

gel toothpaste - 1 tube;
single dye - 2 - 4 drops;
sunflower oil - 10 g;
small peer.

Preparation steps:

The contents of the tube to squeeze into the container.
Add to pasta paint, mix so that there are no lumps.
Put the sudden on a small fire. For 10 - 15 minutes to stir the contents. Elevative to the toy liquid evaporates, the rest of the substance is hardening.
Remove from fire, let cool.
Hands, lubricated oil, obtained lumps need to be thickened.

Lizun from shaving foam

This method of cooking especially like children, because as a result of Handgam, there is a dazzling white.

Of course, the fathers are not too glad to waste their razor reserves, but the goal justifies funds.

For the slide it is necessary to take:

sodium tetrabrate - 17.5 ml (3.5 teaspoons);
shaving foam - 50 ml;
pVA glue - 30 ml;
warm water - 100ml;
2 enameled bowls.

Cooking process:

In the first idea, mix the powder of the borants (one and a half of teaspoons) and water (50 ml) until a homogeneous mass is obtained.
Add glue and razor foam, mix thoroughly.
In the second idea to dissolve 2 teaspoons of the tetraborate in 50 ml of water until a homogeneous substance is obtained.
Slowly pour the solution from the second bowl in the first. To interfere until the lumps will stop sticking to the hands.

From shampoo and salt

When using this method, Handgam is not too dense, a little liquid. But such a recipe also has the right to exist.

For him you need to take:

any shampoo - 4 - 5 tablespoons;
salt non-iodized - 2 - 5 tablespoons (depending on the result).
capacity.

The cooking method is very simple:

Place the shampoo in the ass.
Gradually pour salt into it, stirring constantly.
When the mass thickens, the toy is ready.

Another method of production of lysuine from the shampoo requires a liquid for washing dishes. It is necessary to take 150 ml of both components. For transparent lysuine, it is worth choosing the corresponding materials - without color.

Preparation steps:

Mix in a bowl constituting to a homogeneous substance.
Put a vessel with the contents in the refrigerator.
To withstand 45 minutes - 1 hour, remove the finished lysun.

Such a toy should be stored at more low temperaturesnot to lose your properties of tightness. Therefore, after the game, it is better to immediately send slot into the refrigerator. Then they can play for a month - one and a half.

Step-by-step instruction from flour

Safe Handgam can use even the smallest fidgets in their games. Make it simply, and how much joy such a toy brings kids - not to convey words!

Ingredients for lysuine:

flour - 2 glasses;
water - 0.25 glasses of cold and hot;
paint substances.

How to do:

Sambee flour through a sieve into a small container.
Add cold water, behind it is hot. In no case should not be used boiling water, otherwise the slide will not work.
Mix all the components to a homogeneous state, carefully check the absence of lumps.
Add 2 - 4 drops of dyes, mix. It is better to use natural additives to give color from vegetables or fruit juices.
Put the ass in a cold place (on the street in winter or in the refrigerator), leave for 3 to 4 hours.
The cooled mass should be removed, to turn in the hands - and it is ready for use.

How to make lysuan from plow glue

Most recipes for this popular toys as the main component have glue PVA. It has the desired consistency, color, and also connects all other components of the slide among themselves.

I want to allocate one especially interesting way - Magic lysun. Such a toy will be attracted to the magnet, and with the help of special ingredients even glow in the dark.

For him you need to have:

sodium tetrabrate - 0.5 teaspoons;
pVA glue - 30 g;
water - 400 ml;
food colorings;
phosphoric paint - 2 g;
iron oxide, you can take a developer laser printer - 2

Preparation steps:

Pour into the container powder borants, add 200 ml of cold water, mix so that no lumps remain.
In the second idea, dilute PVA glue with 200 ml of the remaining water to a homogeneous solution.
Add to adhesive solutions dyes, phosphoric paint, mix.
Slowly pour the contents of the first soulful to the second container, regularly stirring.
It is not necessary to add the entire solution of the tetraborate, should be viewed for the consistency of the resulting mass. If it is normal, it is necessary to stop connecting the components.
Add to the resulting mixture of iron oxide, mix.

Magic slim ready. Children with delight are watching how the toy is attracted to the magnet, and at night glows in the dark, like a firefly.

Plasticine toy

You can make one more lysun without glue, based on the material that children always abound. Plasticine Handgams are easy to prepare and relatively safe.

For them it is necessary to have:

100 grams of plasticine - can be one color or different;
15 g of food gelatin;
200 ml of cold and 50 ml of hot water;
iron bowl or other metal support;
plastic Capacity.

How to do:

In the metal tank, soak gelatin in the glass of water temperature.
After an hour - one and a half, put the dishes on weak gas, stirring, bring its content to boil and remove.
To stretch the plasticine with his hands to become a fitful and warm.
Put a soft mass in a plastic container, pour 50 ml of hot water, mix, trying to make the most homogeneous composition.
Add to the plasticine substance has already a little cooled gelatin, mix thoroughly, not leaving the bunches.

Place the mass in the refrigerator for 30 - 45 minutes.
Such a slider may last to serve in its owner.

What is necessary:

actually, the pencil itself is 4 pieces;
favorite component Tetraborate - 5 mg (1 teaspoon);
water - 100 ml;
dyes;
two tanks.

Preparation steps:

Rods (adhesive substance) Extract a pencil from plastic case, folded into a glass ass.
Put the container with the contents in the microwave. The time range depends on the process of turning the mass into more viscous.
Add to the resulting mixture of food or natural dyes, gouache (2 - 3 drops), mix.
In another container, make a solution of powder powder with water.
Carefully connect both mixtures intensively mixing the contents.
It is necessary to pour the solution of the tetraborate in the glue until the composition of the desired consistency is.

Transparent lysun do it yourself

The slide, similar to a crystal pebble, is not so simple as previous options for various "hand-held chewing". But such a toy will be proud of every child and the subject of envy of friends and classmates.

This will require:

polyvinyl alcohol (water-soluble polymer) - 100 ml;
sodium tetraborate - 25 g;
plastic dishes.

How to cook:

Pour alcohol into the tank.
Add bora powder to it and quickly start mixing the components.
Need to continuously interfere with liquid 10 - 15 minutes to achieve necessary effect. She gradually thick.

The result is a glass dazzling lysun.

Playing with him too often should not be because of the created toys enough high level Toxicity.

Such an extensive list different ways Cooking allows parents along with children to make Lizun's houses from girlfriend.

In the granted recipes, you can add additional components: blasting, balls from foam, beads, pearl ... fantasy will help create new interesting options Favorite toys. Also, to remove the characteristic smell of glue, it is worth using aromatic additives or essential oils.

So that Lizun can a little more to delight children, you need to remember the rules for its use and storage:

after the game, you should carefully flush your hands;
store slim is necessary in a sealed container with a lid - glass jar, plastic bag, plastic container;
do not put a toy near heating devices, under the right rays of the sun;
dried handgam should be put in water on a short time, it will again be suitable;
it is necessary to try so that the slide does not fall on the carpet or other surfaces with a pile - so it comes into disrepair faster;
colored "manual chewing" leave stains on clothes that are difficult to output - you should be neat during the game.

Holding such simple rules, You can save the lysun for a long time in a suitable condition. Such a toy will absolutely definitely become one of the most beloved from any child.