The best garden ideas: do-it-yourself flowerbeds from tires. Crafts from tires: flower beds, flower beds, figures, garden furniture How to make a flowerpot from a car tire

Decorative elements of the garden are always very popular. Beautiful garden helps to break away from the worries of everyday life and fully relax. Flowerpots for summer cottages are not only an opportunity for the gardener to select the optimal soil composition for each green pet, but also The best way placement of accents that can emphasize the harmony and magnificence of the garden. decorative pots can be purchased at specialized stores or create unusual flowerpots for flowers with your own hands.

Many gardeners, meeting in city front gardens with funny designs for flower beds made of car tires, often thought about the question "how to make a flowerpot from a tire that will become a worthy decoration of a garden interior."

Car tires, having served their time properly, can find a new life by becoming an interesting and functional element of garden decor.

Do-it-yourself flowerpots from tires are a quick, convenient and most importantly free way to create original decorations that can emphasize the beauty and magnificence of plants planted at the bottom. Material for making flower pot You can get hold of any tire shop.

To create an unusual element of the interior of the backyard, you need a little imagination and about half an hour of physical effort to cut out the petals or other parts of the vase with a powerful knife or jigsaw.

The technology for making a do-it-yourself flowerpot from a tire is quite simple. Any tire size can be chosen: R12-R17, etc. So, let's go:

Foundation preparation. The rim is cut with a knife along the border of the transition from soft rubber to thicker rubber around the entire tire. Under the tread inside the tire is a metal cord, which will not be able to cut out. The cord will serve as a natural boundary to which cuts must be made from the center to the tread in the sidewall of the tire.
Making cuts. Cuts 5-10 cm deep are made with a well-sharpened knife. The width of the grooves is any, but not less than 10 cm, since in the future they will act as the basis for decorative elements flowerpot.
Tire turning. After the cuts are made along the entire diameter of the tire, it is necessary to turn it inside out. To do this, the tire is turned over with notches down, the foot is fixed to the ground on the side with a solid rim in the transition area to the tread. To turn the tire inside out, efforts should be directed from the center of the product and at an angle of 45 degrees. Having turned out a small part of the rubber, further work goes easily.
Studying decor elements. The tire turned inside out now looks like a real flowerpot, which is enough to add only small elements and paint it in the desired color. The sections of rubber between the cuts can later be shaped into petals, semicircles, triangles. Such garden flowerpots with their own hands will decorate the front area, patio, recreation areas.
Filling the flower bed with soil. Any agro-textile material is placed on the bottom of the flowerpot, preventing the germination of weeds and providing the necessary drainage of water. The container is filled with fertile soil for planting plants and flowers. For this purpose, a tire is laid out at the base from truck and is filled with a layer of earth, on top - a flowerpot of wheels R16-17, and the third level is a vase of tires R12-R13.

Here's what the whole thing looks like:

To transform a tire into a pretty flowerpot, you should first remove a very strong, hard inner rim, which is always placed where the wheel fits on the rim.

If you want to create a flowerpot for a garden on a stand, you can not cut out the core at all, but use it as a base for a bowl

Here are some design examples what can be done in the same style:

Self-made concrete vases

If you want to create a spectacular decoration for a garden or flower garden that will last for decades, you can make decorative flowerpots from concrete with your own hands. You will need cement, sand, water and any form for pouring. If there are often no problems with the acquisition of material for manufacturing, then questions may arise with the search for a form, especially if it is original or complex. Ready-made forms can be found in construction stores. Often they are made of plastic.

Before filling the mold with cement mortar, it should be treated inner surface engine oil, grease or concrete spray. Surface treatment will make it easy to separate the mold from the concrete later on. The solution is mixed in a separate container. Only after that it is poured a third into the mold.

A smaller container (also sprayed) to create a recess for placing a flower is immersed in the center of the flowerpot when the solution has set a little, but is still quite liquid

The voids between the walls are filled with mortar to the brim and left for several days to solidify. The template is easily removed from the concrete flowerpot after light tapping with a hammer along the entire outer side.

In the absence of the possibility of incurring additional costs for the purchase of a form, you can use the two usual carton boxes different sizes. To do this, the seams of the box are reinforced with tape. To the bottom of the box bigger size a thin layer of sand is poured and cement mortar is poured onto one quarter of the box. While the solution is a little fastened, you should prepare another smaller box and cut out the bottom in it. Then install this box on top cement mortar. The voids between the walls of the boxes are also filled with mortar. It takes 5-6 days to harden the mold. The frozen flowerpot is removed from the mold. The bottom of the vase is drilled in several places to ensure sufficient water drainage. A concrete flowerpot is ready: you can fill up a layer of soil and plant flowers.

We bring to your attention an example of the manufacture of a concrete flowerpot using factory forms:

What else can be used as a flowerpot?

Outdoor containers for flowers, made of natural materials: wood, stone, most organically fit into the natural environment. Original flower vases can be made from old wooden barrels, tub, boxes, carts.

A real masterpiece can come from an old stump. The basis for such a flowerpot can be found in the forest. For creating unusual jewelry old tree stumps of various intricate shapes are perfect. To create a recess for placing plants, holes should be drilled in several places on the surface of the stump at a small distance from each other. Thereafter inner part wood is easily picked out with chisels. The resulting void in the center of the stump is filled with earth for planting.

In the hands of a craftsman, seemingly ordinary containers can be transformed into amazingly beautiful flower containers that will become a bright touch to any interior.

In such flowerpots, compositions from several types of plants look spectacular: petunia, viola, balsam, coleus, lobelia, pelargonium

To extend the life of a flowerpot made of wood, it is advisable to treat the surface with antiseptics and cover with a layer of varnish or drying oil.

The main advantage of outdoor flower vases is mobility, which makes it easy to change the "decoration" of the interior. Do-it-yourself flowerpots will become not only bright inclusions adjoining territory, they can organically complement and mask bald spots in flower arrangements continuous flowering in flowerbeds.

Sometimes you want to show your creativity in some unusual role. For example, decorate a flower garden near the house. To do this, you need to know how to make flowerpots (tires and other available materials are full everywhere). You should not visit expensive supermarkets in search of elite material, because you can pay attention to ordinary tires that magically turn into fairy-tale heroes.

Old tires are free material. Its benefits are in form. With the help of light movements and imagination, the rubber tire turns into a wide and roomy flower pot. In terms of time, this activity is very fast. It will take the craftsman about an hour to cut with an electric jigsaw or good knife a certain figure, paint it and transplant flowers there.

Materials for work:

1 Tires in size R12-17.
2 Knife or jigsaw.
3 Sand and cement.
4 Pebbles or rubble.
5 Grinding machine.
6 Primer and paint.
7 Soap solution.
8 Wire.
9 Trowel and paintbrushes, hard-bristled brush.
10 Tank for concrete solution.

It is best to take winter non-studded tires, they are soft and lend themselves well to deformation. Before work, the rubber material must be well cleaned of dirt and earth, so as not to spoil appearance Scenery.

step by step algorithm

First, you should consider the algorithm for creating the simplest and most common version of the design of a rubber pot for a flowerpot. This will be a bowl of tire with jagged edges in the form of flower petals.

It is convenient to place the cleaned tire in a lighted place and draw a chalk drawing on the side. For example, draw petals in the form of triangles. With a knife or jigsaw, cut out the pattern along the contour. After this action, the master makes several longitudinal cuts every 8 cm, and then turns the tire inside out. The last manipulation is difficult, so a man should do it. So that the appearance of the cut edge does not hurt the person, the edges must be carefully sanded.

For the stability of the product, you will need to take care of the leg. It could be a wheel rim. Then put foam rubber in the middle and fill it with earth to the very top. It remains only to decorate the flowerpot with any elements and paint it beautifully. You can use several tires of different diameters in order to make an unusual pattern out of them.

Tires are primed and painted. It is best to use paints of light shades, because the flowerpot will be constantly under the open sun, gradually losing its color.

Popular Options

The easiest option for decorating a flower bed with rubber tires is a combination of tires of different colors. They can be arranged in a row or in a circle, laid in the form of a multi-level ladder. Tires of different diameters look interesting if they are laid one on top of the other in the form of a pyramid.

For the most creative craftsmen, the option of a hanging flowerpot is suitable. To do this, a strong metal chain is attached to the tire and hung, for example, from a tree. Be sure to cover the bottom with dense material.

Most complex options- creation of different figures or household items from several tires. So, many craftsmen with the help of several tires, a pipe and a bent metal ribbon decorate the yard with spectacular flowerpots in the form of a teapot and cups.

An ordinary flowerpot made of tires can be decorated around the edges with stars. This is easier to do if you break the circle into 6 or 9 triangles, into which you enter the same ornament.

After drawing, it remains to cut along the contour. If you cut 3-5 waves close to the disk, you can get a flowerpot with smooth shapes. By alternating several deep cuts with short ones, you can complicate the contour drawing a little. Here you need to get used to and dream up.

Product stability

If there is a desire to create high products for flowerpots, then you need to take care of his leg. A leg made of concrete and pebbles or others looks creative decorative stones. The process is easy: the master wraps the lower part of the flowerpot (disk) with a decorative mesh or wire and kneads the solution. Cement, water and sand are poured in a ratio of 1:0.5:3, but in such a way that the resulting material has a liquid consistency.

Using a trowel, you need to throw the solution onto the disk. To give the leg a more spectacular look, it is necessary to decorate the solution with small pebbles or multi-colored fragments of broken glass. After a while, glass and pebbles are washed with water to wash away the dirt that has stuck to them. And in order to concrete base not cracked under sunbeams, over the next 3 days, it needs to be moistened with water from time to time.

Funny fairy tale characters

There will be no limit to children's happiness if a turtle, swan or other appears near the house fabulous creature. To create a turtle, you will need tires and a tread. The body will be 1 whole tire. The protector must be cut into 4 parts and attached to the sides. This is what the paws will look like. You can fasten them to the main body with wire staples.

A tail is cut out of a small piece of rubber, and a tail is cut out of a piece plastic pipe make a turtle neck. A few old newspapers should be crumpled into a ball and attached to the neck with tape. For a complete resemblance, a straw hat is put on the head. final touch there will be coloring and drawing of the eyes, mouth, paws.

Swan is a product for those who have already tried to make something out of tires. The master will need to cut out the neck, wings, head and tail. This can be done according to this scheme (photo 1). It must be drawn on the tire and carefully cut out. The black outline marks the border of the neck and head, the blue one is the 2 wings, and the red one is the tail. After this manipulation, the product should be turned out.

Separately, make a beak from any material and paint it red. Now you can start assembling the swan. Put together 2 parts of the head and insert a beak between them, strengthen the structure with self-tapping screws. They are best inserted into the eye holes, hiding with circles of black electrical tape. Then the assembled neck with the head should be slightly lifted and pressed into the tire, the resulting fold should be fixed with self-tapping screws. Now you just need to color the beautiful swan in White color and plant flowers.

So, dolphins, parrots and other birds and animals can be cut out of a tire. The main thing is to think over the scheme, transfer it to paper, and then to the bus itself. Then it’s up to the little things: cut, fold and secure, and then color bright colors and attach decor. With the help of simple plastic bottles and covers from them, pipes, rubber pieces, you can come up with an incredible decor for fabulous flowerpots. Therefore, fins, tails, eyes and crests are always formed separately, attached to the main structure with simple paper clips or self-tapping screws.

If very complex schemes are still difficult to perceive, the future master can start from the very simple option- creation of a fence in the form of a chain. Such a large chain of dyed different colors tire flowerpots will be no less attractive than an unusual fairy tale hero. You can connect the links of such a chain with a wire. The border looks original in silver or gold.

Creative people never sit idle, constantly inventing something for themselves. Creating flowerpots from such available material will bring not only benefit, but also spiritual pleasure to a creative person.

Original frames for garden plants can be created even from waste material: both the yard is decorated and the environment benefits. Learn how to make flower beds out of flower tires with your own hands in the country or in the yard. Evaluate the feasibility of such work, familiarize yourself with the methods of cutting, turning and painting car tires, with the nuances of their competent choice. Compare photos of finished products and choose a master class for making an unusual flower garden that is suitable for the degree of labor intensity.

The feasibility of making flower beds from tires

Used tires are a material in which any landscape designer who imagines how to make flowerbeds from tires with his own hands opens up new possibilities. It is the tire, and not just a sheet of rubber, that has certain advantages that make it easier to work with it:

Rough cost. Surely among the neighbors there are car owners who dream of parting with old tires. For them, this is rubbish, but for the artist, it is a future work of art that can only be rolled to the site or brought in the trunk.
Ease and speed of processing. Chalk, a sharp knife or a jigsaw, a grinder and a spray can of paint - these are all the tools needed for such creativity. BUT the simplest flower bed it is constructed from cylinders in half an hour at all: the tire is placed on the ground and “stuffed” with soil.
Durability. A rubber bed does not attract bacteria and fungi, does not rot, is not afraid of accidental impact and does not collapse under the influence of precipitation. If it cracks after especially severe frosts, it is easy to replace it.
Mobility. Flowerbed from old tire – one piece construction, which, if necessary, can be easily moved to another place. To do this, you just need to remove the soil from it.
Possibility of transformation. Even handmade flower beds of tires over time can get bored. The easiest way to avoid this is to repaint outside and plant other types of plants.

Figured flower bed from an old tire

Doubts about the advisability of decorating the garden with flower beds from tires are usually associated with the dimensions of the cylinders specified by the manufacturer. In a very modest area, they really can look foreign, and in a large area they can get lost. The problem is solved by combining tires with paths, benches, lighting elements, as well as building flower beds from several tires and multi-tiered compositions.

Lazy Option: Potted Plants Placed on a Stand

How to cut tires and how to do it right

When looking at a wheel that is so huge and hard, capable of withstanding the weight of a loaded Gazelle or a powerful SUV, the question arises of how to cut a car tire for a flower bed. In fact, rubber is even easier to deal with than plywood if you choose right tool for each stage of work, of which there are three:

Ripping of rubber. The best tool for the first cut is a shoe knife. It can be made independently from the blade of a mechanical saw or a planer blade. The handle of such a knife is wrapped with several layers of electrical tape, which allows the knife to sit firmly in the palm of your hand. This is important as the rubber will resist the blade. The knife is inserted into the incision and moves upwards with the other hand, bending the rubber layer to the side with the other hand.
Side processing. You can cut the tires for the flower bed evenly or in waves. In the first case, a shoe or other sharp knife with a thin butt is enough; in the second, it is better to use a jigsaw, the saw blade of which is periodically lubricated with grease or mortar laundry soap. Some craftsmen use a grinder with a small disc, but high speed entails strong heating and even burning of rubber with smoke and an unpleasant odor.
Cord cutting. Steel cord reinforcement (breaker), which serves as the basis of the tire carcass, is cut with a grinder, less often with metal scissors. You can recognize the presence of steel in the breaker by marking Steel. The absence of such a marking indicates a nylon cord, which is cut with a strong sharp knife.

A car tire is more complex than it looks

Electric jigsaw - the perfect tool for cutting old wheels

To cut a tire for a flower bed and not injure yourself, be sure to use tight gloves and goggles. Especially carefully should be handled with sharp metal cord threads - splinters from them are very painful. You need to work on a wide solid surface: a table or a piece of plywood laid on the ground. At in large numbers rubber dust, which distinguishes Chinese tires, a respirator will be useful.

How to choose and prepare a tire

Working tool for steel cord - angle grinder

If it is possible to choose the material for the flower bed, you can greatly simplify the work of processing rubber with your own hands. To do this, you need to use the data:

origin of tires: imported ones cut better;
seasonal appointment: winter more plastic;
service life: the more worn out, the more pliable;
cord material: metal will require more effort than polymer.

Well-preserved and brightly colored tread

The degree of wear of the tread should also be taken into account. A clear pattern of checkers will give additional expressiveness finished flower bed. But if you plan to turn the tire inside out, you need the tread as "bald" as possible.

In any case, the first operation to turn a tire into a small sculptural form is the cleansing of dirt. The tire is washed under a powerful jet of water from a hose. This will not only add aesthetics, but also protect cutting tools from rapid blunting.

Variants of flower beds from tires and master classes

The fantasy of home craftsmen knows no bounds - lovers of equipping personal plots with their own hands, they came up with dozens of options for decorating flower beds from tires.

Classification by shape and method of manufacture

Flowerbeds from old tires are conventionally divided into several groups:

horizontal single-tier - the most simple and unpretentious;
horizontal multi-tiered - the first floor of such a flower bed consists of 5-7 tires, three more on top of them and the last one crowns the composition;
vertical - a tower is made of tires, flowers are planted in the top and in pockets cut out on the sides;
in the form of agricultural items: teapots, carts;
in the form of various animals.

Another interesting variety of flower beds made of waste rubber is hanging planters, with which you can diversify the wall of an outbuilding.

A dull brick is simply unrecognizable

How to mark rubber

To make a flowerbed of tires even, before cutting, you need to outline a line along which the knife or jigsaw will move. It is convenient to do this with chalk or a bright marker that will stand out against the graphite background of rubber.

The brighter the markup, the more convenient it is to work

The first line should be in the shape of a ring. It is carried out in two ways:

Measure with a tape measure equal distances from the outer or inner edge of the tire, apply strokes (about every 10-15 cm) and connect them.
Holding the chalk large or index finger, cling to the protector (or bead ring) with the little finger and lead the line.

To mark the petals, you will need an internal and external line. Marks are applied to each, then they are connected with a wavy line of any style. At this stage, it is important to consider that petals less than 7 cm wide do not hold their shape well.

Four wheels and some paint - the result is a bright flower garden

Flower - quickly and reliably

The options presented in the photo in this section are among the easiest to manufacture, but quite spectacular due to competent floral decor. The following will help a novice landscape designer to make a flower bed out of tires: step-by-step instruction.

Take four identical tires and rinse them thoroughly under running water.
Set aside one for the time being, and on three, draw a line with chalk dividing each exactly in half.
Cut the three marked tires with a cobbler's knife or a jigsaw.
Paint all tires using paint brush or a balloon. Choose a color that matches well with the plants you plan to plant.
Lay the tire halves in the form of petals, fill the flower garden with prepared fertile soil.
Place the whole tire in the center of the composition and also complete with primer.

Flowers can also be cut from tires

Turtle - feel like you're in the Galapagos

To make a flower bed out of car tires with your own hands turned into genuine creativity, try making a turtle figurine:

Prepare two tires for the flower bed. Leave one intact, and cut the protector from the other.
Divide the protector into four equal parts, which will become the legs of the turtle.
Make a short triangular tail from a piece of tread.
For the head, take a flat bottle of household chemicals, for example, from Mister Muscle. Its neck will become the turtle's neck.
Make cuts in the whole tire and insert paws, tail and bottle into them. Fasten with screws.
Color the turtle, draw her face.

On a flower bed-turtle in the garden look good low bright flowers: tagetes, nasturtium, ornamental cabbage.

Frog - from princess to traveler

If the garden has a pond, plant a cute frog figurine on its shore. This idea is good in that the frog can be made without the laborious cutting of the steel cord. The main thing is not to regret the rich green paint.

Eyes from plastic bowls, paws from a hose and a rubber mat

The body of the animal is laid out from three solid tires in the form of a two-tiered flower bed. For the eyes, take tires of a smaller diameter and install them vertically.

Depending on the desired degree of glamor, they glue with rubber glue or fasten long or short eyelashes with self-tapping screws, draw “bow lips” or a simple smile with red paint. You can complement the image with an arrow, a crown or a pair of ceramic ducks.

Flowers in such a flower bed are placed behind the eyes and in the lower tier. Grasses and sedges are appropriate around the figurine, hinting at marsh vegetation.

Video: One hundred DIY garden frogs

Swan - white grace on a green lawn

If you have learned how to cut flower beds from tires with your own hands to decorate the garden, you can try to make a swan. This work requires some skill, since the part of the tire in such a figure must be cut, turned inside out and reinforced in a certain way. Consider the step-by-step process of the birth of a beautiful bird from rubber scrap.

Cutting tires - the most crucial moment

Choose a tire with the most worn out tread for the flower bed, since curly cuts will have to be made on it.
Using the pattern in the photo, apply the lines of the head, neck, wings and tail to the protector. Pay attention to the shape of the beak - this is the most difficult area. Some craftsmen make the beak in the form of an ordinary triangle, which makes cutting easier, but the bird loses its realism.
At the nodal marking points, drill holes with a diameter of about 10 mm.
Cut the rubber along the markings with a shoe knife or electric jigsaw. Start work from the base of the neck of the figure, leading the cut line to the head. To prevent the rubber from vibrating, it is recommended to cut both sides in parallel, 5-10 cm from each alternately.
Finish the edges of the parts: clean the rubber and the ends of the cords. Flowerbeds-swans from tires attract children - you should take care of their safety.
Turn the wings inside out.
Strengthen the neck with a steel bar. To do this, drill two rows of holes in it and further through the entire body to the base of the tail at a distance of about 15 cm from each other. Pass the wire staples through the pairs of holes.
Attach a steel bar to the base of the tail and fix the chest and neck of the figure on it, twisting the ends of the wires with pliers. Cut off the excess and give the swan neck a regal twist.
Color the finished figure, emphasizing the beak and eyes. It will look especially impressive if it is planted (and attached with screws) in a lake from a tire painted blue.

Instructions in the photo:

Swans on stands, as if on waves

Vase - build a small Peterhof in the garden

The aerobatics of the transformation of tires is considered to be the manufacture of flowerpots with legs from them. It is worth turning the unsightly wheel inside out and painting it - in front of you is a masterpiece of gardening art, in which it is difficult to recognize the source material.

Elegant flower pot

To create flowerbeds in the form of flowerpots, “bald” winter car tires of foreign production are taken - they are the softest. Serrated or rounded-wavy petals are marked on the sidewall, along which rubber is cut. At this stage, it is important to try to keep both sides of the cut neat, since one of them will become the edge of the vase, and the second - the edge of the stem.

Stages of turning a tire into a flowerpot

Turning the wheel is better with two people. It is placed with the cut down, for emphasis, they step on the disk with their foot, take the edge of the cut with both hands and pull it towards themselves. Gradually move in a circle, pressing down the protector in its most convex part. If there is a chamber inside the wheel, it is cut off at the end of the eversion. Due to the laboriousness of the process, it is recommended to watch a video on how to unscrew the tire for a flower bed with your own hands.

Video: How to turn out a car wheel

The tire flower vase is almost ready, but it looks like it was taken from the seabed. The rubber walls and the disc are cleaned, degreased and painted, and with inside also about a quarter of the height, since the ground level will be below the petals.

Geotextiles are placed at the bottom of the flowerpot so that the earth does not wake up in the holes of the disk. Drainage, soil are poured over the fabric and flowers are planted in a flower bed.

Gift for the Mistress of the Copper Mountain

Painting flowerbeds from car tires

Now about how the wheels for the flower bed are painted and how to turn a boring tire into an interesting flower garden. The main requirement for paint is resistance to weathering.

Paint selection and technical points

They paint tires with enamels, oil, acrylic and car paints, nitro paints. To beautifully paint tires for a flower bed, you need to follow a few rules:

pick up bright hues so that the soil inside does not overheat along with the roots of plants;
do not apply too thick a layer of paint, otherwise it may crack, especially in harsh winters or in the heat;
remember the primacy of plants and not let the pattern dominate the flowers.

Bright colors set a festive backdrop for the yard

The design of flowerbeds from tires begins with their degreasing with acetone, white spirit or special liquids for rubber. When the used product has completely evaporated, the surface is cleaned with a very fine sandpaper. Then, as a primer, a thin, but continuous layer of white is placed - this will allow any shade to play in full force.

It is better to apply the paint with an aerosol can, then it will penetrate into all the relief areas of the tread, but there is a high risk of staining the grass around. Therefore, the tire is painted with a spray can, laying thick polyethylene under it. Each layer is given time to dry for at least a day.

You can decorate a bed of tires with your own hands with a brush. This is longer, but you can work by first installing the product on permanent place. With the help of a brush, they also create more subtle patterns and drawings, emphasizing details and shapes.

Folk painting: bright, original, spectacular

Taking into account the general concept of garden decor will allow you to properly paint the tires for the flower bed, while they can:

leave monotonous;
decorate with stripes;
cover with a pattern using a stencil;
paint on the checkered tread;
turn into an ethnic flower garden.

Do not rush to throw away unusable tires. They will be burned, adding pollution to the air. Try to turn them into a unique man-made flower garden, which will decorate the garden and warm the soul. Bright, solid and almost eternal flowerbeds of used tires are a wonderful use for the creative impulses of a person living on their own land.

Waste material can often get a second life if the owner wishes and with the participation of crazy hands. In this review, we want to bring to your attention flowerbeds made of tires. Interested people will be curious to look at the beauty that other people have brought to life, and then do something similar in their own area. Here we will present several photo-master classes, as well as video instructions for their manufacture.

flowerbeds, alpine slides, fashion flowerpots, decorative garden figures- what they just do not make from used tires. It is noteworthy that the rubber is incredibly durable, and copes well with temperature changes, it will perfectly survive the winter, summer, and so on in a circle.

DIY flowerbeds, flowerpots and ponds from tires

A flower bed from a wheel in the form of a flower

Instructions for making such a flower bed are presented step by step in the photo below.

Flower bed (video master class)

Video instruction flowerpot with stand

tire pond

Highly interesting idea to improve the site, it looks very impressive. Looking at this pond, you would never guess that it is based on a tractor tire.

Turtle from an old tire

You will learn how to make such a tire turtle by examining the photos below.

Flowerpot on legs

Instructions for making such a very stylish flowerpot are presented in the photographs below.

Well

The well is made very simply, the tires are stacked on top of each other, fastened with screws for reliability, and then painted in the desired color, you can look at the brick print.

rock garden

To create a rock garden from tires, you don’t need any supernatural skills, it’s enough to build the first row of tires on the ground, and then lay the second one on them, and, if desired, the third. If you want to add color to the design of such a flower bed, then before installing the tire, you need to paint it in the desired tone.

In the form of a mug

Tires need to be painted, then mounted on top of each other, cut out a handle from a separate tire and fasten it with screws or nails on a mug. Square stones can act as sugar.

Bunk

Everything is simple here, first a large diameter tire is laid on the ground, covered with earth, and a smaller analogue is already laid on it, and also covered with earth from the inside. After that, you can start planting plants.

suspended

These hanging flower beds look really cool! To create them, you need screw-in hooks.

Serpent in the river

The river itself can be laid out colored in Blue colour stones, but paint the tires in green color, and prikopat at some distance from each other. Well, plant blue flowering plants along the edges.

park with dinosaurs

Nice idea. In a tire painted in the desired color, you need to plant weaving plants and put toys in the form of dinosaur figures.

Painted

If desired, improvised flower beds can be painted with paints, depicting ornate patterns.

wall

This flower bed is fixed on the wall with screws.

Standing

It is noteworthy that such an improvised flowerpot will shade the plant a little, and the latter will feel as good as possible inside.

Tire swan (video instruction)

Additional photos of different flower beds

How do you like the ideas of such flower beds from seemingly outdated material? Lots of great ideas, don't you agree? Bring these ideas to life on your plots, decorate home gardens with your own hands, and admire the work done! Good luck crafting!

Another interesting project for the creative recycling of car tires, which does not require much effort, involves making beautiful flower pots from them.

Pots made from this material look just great. Outwardly, they are executed in such a way that from afar no one will ever say that such pots are made of tires.

These homemade products can be placed on the ground, or you can hang them in the air.

Required materials for making a pot:

Old tire;

Gloves;

Long knife;

A piece of dry cloth;

Paint of any color;

Wide paint brush;

Ruler;

Wire mesh;

Strong glue, or liquid nails.

pot making

First you need to find your tires. Or at least one. If these are not available, you can simply ask your friends for them. The tire size you need depends on your project. But it would be best to start with a small, but not too small, tire. As soon as the first moment is passed, the main thing remains - to make the pot itself. But remember that you need to do everything with gloves so as not to get your hands dirty. Now take a long thin knife and begin to carefully trim the top with a sharp wave.

Simply put - make cuts in triangles, the base of which should not exceed five centimeters. This can be calculated with a ruler, or just by eye. It is very important that the notches are exactly this shape, then it will be easier for you to turn the tire inside out.

Make sure you cut off the top completely in a sharp wave shape. If something is not cut, cut it. But in no case do not cut off a piece of rubber! By the way, if it doesn’t work with a knife, then you can use scissors. They are safer. Then remove the cut off top and set it aside. Don't throw it away as it will come in handy later.

Now carefully wipe the tire inside with a dry or slightly damp piece of cloth. If it is completely dirty, then just wash it and let it dry, and then carefully turn it inside out. It turns out that the corrugated side is inside.

If the rubber is very tight and you can not turn it out, then there is a little secret. You just need to lightly press your knee inside and pull the edges of the tire towards you. That way she'll get over it faster.

As soon as the tire is turned out, you will need the piece that was cut off earlier. But first, take a brush with paint and paint the inverted tire well. This must be done both outside and inside. Once this is done - take a piece of wire, or any other metal and durable mesh.

Cut it so that the diameter of the mesh is slightly larger than the diameter of the cutout on the bottom of the tire. Place a piece of mesh on the bottom of our pot, after pouring glue or liquid nails under it, and firmly glue the piece that you cut out of the tire on top. Make sure nothing is left behind. Let dry. This mesh will not only hold the soil for the potted plants, but it will also act as a drain.

By the way, you can paint your tire either by hand, with a brush and paints, or using a special spray. Both the first method and the second fully justify themselves. The only thing is that in order for the paint to lay down well, it is necessary to apply at least three layers of it one by one.

Once everything is ready - the paint and glue are dry - it will be possible to fill the pot with earth and plant plants in it. For example, petunias will look very good in such a pot. In addition, this planter can not only be placed on the ground, but also suspended. But for this, pots made from small tires are more suitable.

If your pots are made from very large tires, then you can use them not only for flowers, but also for other seedlings. For example, for fruits and vegetables.

It's all. Feel free to experiment with different colors, sizes and shapes of pots.