How to tint pine in gray. Tree simulator: water-based colors, white with her own hands, photo oil and bleached oak, toning. Step to uniform pine tinting

Inner staircase - functional element and noticeable accent in the interior of the house. Most often it is built from pine wood. The task of the designer is to make the architectural component in harmoniously poured into the situation and fulfilled its tasks as long as possible. For this, the staircase from pine is treated with special means and stained in accordance with the general design.

What are the advantages of making a staircase from pine

In the construction and decoration of budget wooden houses An array of pine is used. This wood is not so durable, like oak, cedar or larch, but sufficiently wear-resistant, more common, loshev and is available. Pine better atebecause it has a more dense texture and much less bitch that reduces the duraterial strength.

Pine products are distinguished by a pleasant light golden or almost white color and a unique pattern.

Pine is distinguished by a pleasant light golden or almost white

Features of pine wood

Working with a pine is somewhat more complicated than with a cedar or oak. Soft wood needs a thin grinding and a thorough choice of processing tools.

The density of the material depends on the cultivation conditions of the tree:

• In warm periods, intensively growing fibers form a loose array. Cold years provide solid and dense wood.
• The texture has extracted in the mountains, the texture is dense and uniform, and in the grown on sandy soils - light, loose, fibrous.
• Northern pine quality material extracted in southern latitudes.

Therefore, most of the resulting lumber absorbs the processing tools is unevenly. Under the transparent coating, unsightly spots are manifested that according to aesthetic considerations is extremely unpleasant. The appearance of color spots on the surface of the pine products contributes to the Zhiviza (resin). If raw materials are harvested in winterWhen the main volume of resin is pulled by a tree into the root system, the fibers remain dry, clean and durable. They evenly absorb processing tools. On wood cut down during spring-summer savings, divorces appear and stains. Discoured into warm dry roomShe begins to push the resin outside.

Steps internal stairs usually build from edged massive board. But often use a glued board, which has greater strength and durability. The color difference between the lamellaes, of which such a board is collected, especially noticeable. In addition, from the drops of moisture, the lamellas are beginning to be rolled, the gaps are formed between them.

On the glued board, the difference in the color of the lamellae is especially noticeable

If you wish to leave an inter-storey wooden stairs Its initial natural color will have to use special means Processing: primer, mastic, wax, veil. An easier option is to apply a decorative opaque coating onto the staircase.

Why you need to paint in the house

The statement that the tree is beautiful and does not need painting, in the root incorrect. Wood really has an attractive look, but it is very vulnerable to insects, mold, solid soles of shoes, dirt, fire. Especially quickly wear out the steps.

Stairs stairs wear out faster

Therefore, it is necessary to paint the staircase from the pine. If you want to see the natural drawing of the wood, Krave at least a colorless varnish, but definitely kill!

Paint creates solid protective coveringnot allowing prematurely "otnal" wood fibers. It is inedible for a bug and unsuitable for the settlement of rot and mold. Impregnation at times enhance protection and extend the service life.

Than paint

For processing stairs from pine uses:

So that the coating is high-quality and durable, cover wood only with high-quality materials purchased in specialized stores or manufacturers.

What staining material Select: Comparative Table

For the stairs, use matte or semi-groove paints. Glossy steps and railing from permanent operation over time loses its shine and look untidy. Quickly refresh the color will not work, you will have to grind and repaint all the surfaces.

Materials and tools

• Primer
• Solvent, paint cleaning agent
• Paint, enamel, varnish
• Plate on a tree
• Sealant
• Malyan Scotch
• Protective film
• Putty knife
• Napkins, rags, rag
• Scraper
• Grinding tool, sandpaper paper
• Minivans, brushes
• Security tools: gloves, respirator ("petal" or other).

Operation of work with paint or enamel

All work with paints and solvents should be carried out in the warm season to ensure permanent air vent.

Video: how to paint steps right

Operation with varnish

Preparation and coating of the staircase of the Morilka + video

1. Perform all preliminary work: protection of adjacent surfaces, cleaning, shp can, sealing, grinding.
2. A painting brush apply a stoop one step. Leave for 2-3 minutes to absorb. Dry lint-free rag out of cotton thoroughly wipe the excess substance, leading it only in the longitudinal direction.
3. In the same way, treat all the steps, balusters, railing.
4. If the impregnation color turned out to be uneven, repeat the processing. In order for the verse smoothly lay, did not leave stains, it was better to emphasize the texture of the wood, wet the surface before applying it. When working with the veneer, wear rubber gloves, as the contact of the hands with a blurred rag is inevitable.

Before covering the vessel with the whole staircase, experiment with a tone on a small at least span.

Laccination finish coating (with video structure)

• For stairs, it is advisable to use matte and peeled lacquers. They are not visible traces of wear, and the sliding coefficient of the matte surface is lower, which makes the staircase more secure.

Wearing the glossy surface looks particularly unsightly

• Combined stained stained staining coated combined method. For example, vertical parts of the steps and balasins paint paint, and strongerly wearing horizontal parts of the steps and railing protect parquet varnish.

The best lacquer for steps is polyurethane parquet. He is expensive, but extremely wear-resistant.

When working as a paintopult, the use of the respirator is required

Coloring of internal stairs does not represent serious difficulties and is quite accessible homemade Master. If you have acquired qualitative materials And when working, the technology was observed, your staircase will fulfill its tasks and brilliantly look very long.

Furniture from pine is very popular due to its pleasant texture, acceptable cost, and is distinguished by a long service life. It is clear that wood requires appropriate care, which will increase its strength and extend the service life. In most cases, wooden products made of pine are not toned and not stained, but simply covered with varnish. There are several reasons for that:

• You can buy furniture from different manufacturersAnd she will still look good in the complex.
• Varnish, distributing on the surface evenly, emphasizes the beauty of the tree.
• Pine is considered inexpensive material And the varnishing increases its final cost.

In addition to varnish, paints and vertices are used to paint furniture from pine. So what to paint furniture from pine is better? Tell me in the article.

What gives painting furniture?

Wood staining is done for various purposes:

• To give furniture the desired color;
• To improve quality characteristics;
• To improve moisture and heat resistance.

Today, fresh furniture toned under other wood breeds, such as oak, cherry, nut, etc., is available. But this range of color hammes cannot satisfy all consumer groups.

How can you paint a shield from pine?

Many prefer independent painting wooden furniture. And here there is a natural question than and how to paint furniture Shield From pine?

There are three main wood processing technologies:

• Toning.
• The use of varnish and paint.

Tinting furniture

Pine is distinguished by beautiful amber-golden color. This furniture fits into any interior, ranging from the living room and ending with the children's room. What can be achieved toning:

• select the structure of wood and improve its natural color;
• hide surface defects due to coloring in a darker shade;
• posted Furniture Pine View valuable breed tree;
• hide the inhomogeneity of the color;
• get the unknown color for wood, for example, green or blue.

Important! For toning, aniline dyes are used, aqueous solutions of tannins, salts, acids. They perfectly absorbed wood, quickly dissolve in water.

Features of technology

When processing wood, you need to consider several important points:

1. The surface of the tree must be pulled up to processing, as well as after it.
2. Before toning, you need to progress the surface.
3. It is necessary to get rid of OT. dark spots or drills, as they will spoil the final result.
4. After applying the veil, the tree should dry.
5. Then the wood is covered by translucent paint or varnished.

Pyro and painting of pine wood

At the very beginning, the wood surface is cleared from old paint. Or varnish, all the knots are cleaned. Due to the presence of resinous substances, a lot of difficulties arises on the surface, so it needs to be used to competent furniture painting from pine.

Designing of wood

Pine furniture requires special attention and additional processing. This happens for several reasons:

• Plots where the resin accumulates, they darken with time, spoil appearance.
• Resin creates a sticky film on the surface, which prevents the absorption of primer.
• Due to resin, dyes are unevenly applied.

Designing is the process of complete or partial removal of resin from the surface of the wood. For this prepare special composition:

• 200 g of 25% of the technical solution of acetone;
• 50 g Potasha;
• 40-50 g of food soda;
• 40 g of soap flakes;
• 10 g of technical alcohol;
• 1 l hot water.

All components are mixed, the composition is applied with a brush. Then the surface is washed and dried.

Important! If there are large parts of the resin, then it is better to cut them with a knife, and then these recesses should be embedded with putty.

Printing, painting

After desonylation, the primer is applied. It can be applied using a wide brush or roller. Then the layer of paint or varnish is placed, it is impeded by the sandpaper, and then another layer of coloring matter is superimposed.

Important! Lacquer or paint better pick good qualityBut not necessarily imported production - domestic solutions are also excellent, and at a price cheaper. Choosing a specific type of solution, give preference to a safer, non-toxic mixture, based on the component composition.

The main advantages of pine furniture are a pleasant texture, an acceptable cost and a long service life. It is these factors that became the main reason for its popularity among consumers. However, in most cases, wooden products are not toned and not stained, but only covered with transparent varnish.

Pine Furniture is distinguished by durability, beautiful appearance and relatively low cost.

This has several good reasons:

• buyers without unnecessary problems can make a furniture headset to their taste, regardless of the manufacturer, as the final finish of colorless varnish wooden products from pine will be the same one;
• by its structure, pine belongs to loose rocks of wood. And when applied to the surface of coloring mixtures, there is a completely uniform distribution of the pigment, which can somewhat spoil the appearance of a wooden headset;
• the presence of the formation of bitch in the tree, even with a high-quality drying of the material, does not guarantee the lack of traces of vegetable resins. And this has a significant effect on the color of the tree during operation;
• since the furniture from the pine massif is in the segment of inexpensive heads, then its subsequent processing will lead to an increase in the value of final products.

But what to do when you want to have an exclusive collection of wooden headset?

Methods of painting furniture from pine

Toning emphasizes the natural color of pine and hides various wood defects.

Despite some features of pine tree tinting, consumer demand for painted furniture is constantly growing. Manufacturers are developed and the release of heads toned under the cherry, nut, oak is developed. For this purpose, a complete update is underway both expensive equipment and retraining of specialists.

Expansion of the product range allows you to satisfy only a small part of buyers for painted furniture. Standardizing, thus, the process of changing the type of product, the manufacturer in any case will not be able to offer full color gamut. For this reason, many consumers are solved on a risky step - paint furniture from the pine mass independently.

Types of Painting Headset from Pine Tree:

• toning;
• solid painting;
• varnishing.

Back to the category

Tinting furniture from the massif

Pine wood has a very beautiful natural color, golden-amber, which allows you to enter such furniture in almost any kind of interior.

Having gave it the necessary shade with tinting, the wood structure remains the same environmentally friendly and continues to "breathe".

The toning of furniture is the process of changing the color of the surface with dyes with the preservation of its visible structure. Dyeing is carried out in order to prepare wood for transparent decoration.

Painting Furniture from pine is best in a few layers, pouring the previous layers of small emery paper.

Toning makes it possible:

• strengthen the natural color of wood and highlight it with texture;
• align the inhomogeneous color of the product details;
• light wood to paint into a darker tone, which makes it great to hide some surface defects;
• posses to pine furniture type of valuable breed;
• get unusual for wood Color: Gray, Green, Blue.

For processing of pine furniture, artificial aniline dyes are used, aqueous solutions of tannins, acids and salts, which have light-resistant properties, well absorbed wood and easily dissolve in water.

When tinting pine wood, the following factors are taken into account:

1. The processed surface should be very carefully polished. Finish finish preferably Schlifbumaga №180.
2. Before tinting pine should be treated with air conditioning for wood (special primer).
3. The surface of the products should not contain dark spots, dye flows.
4. After high-quality coloring, furniture from pine acquires smooth surface With a weak gloss.

After the entire surface of the furniture is treated with a verse, it should be good. Next, wood is lacquered either covered by translucent paint.

Back to the category

Lacation and painting products

Before applying a varnish, it is necessary to cover the surface of furniture with a primer and give it to dry.

If desired, the furniture made of pine can be painted in a homogeneous matte color or varnished.

Painting painting from pine supplies a lot of difficulties that arise due to wood features. Such moments arise due to the presence of resinous substances on the surface being processed, which does not evenly cover the product. Therefore, before painting the furniture, it will be necessary to weather, what will be discussed below.

Paint or varnish application technology consists of:

1. Furniture to clean from the old coating. If there are bitch and irregularities, remove them.
2. Wood desightep.
3. Cracks or chips close to putty and give dry.
4. Apply a brush with a wide brush or roller.
5. After drying the primer, you can start painting furniture. If there is a large amount of work, then it is better to use an airbrush or roller. In other cases you can do and a small tassel.
6. Cover the surface with color composition is better in several layers. Immediately before applying the previous layer, pollute shallow emery paper.

For high-quality application and stability, the coating is better to use the following materials:

Before starting treatment with varnish or paint, make sure that the surface does not remain a pine resin.

• varnishes. Can be made on a nitrocellulosic or alcohol basis. Regardless of the selected view, they perfectly emphasize the natural color of the pine and sufficiently dry;
• enamel. They completely hide the texture of the tree, and the furniture acquires the type of plastic or MDF. For high-quality application and sustainability, it is better to use high-strength polyurethane enamel. Before applying the paint mixture must be carefully shaken;
• paints. The pigmented composition of the coloring mixtures hides insignificant defects, as for alkyd and uretan-alkyds, the first are well applied, and the second are suitable for previously painted surfaces.

Why are we?

This is a rhetorical question. Each firm wants it to be this way. We are not the oldest organization of Moscow, although in the market since 2001. But we can say with solid confidence that all the work for which we do, do with maximum quality!

Board tinting is the process itself in yourself! The tinting of the board differs from the processing of parquet by many nuances!

I do not know how not to try!

Useful articles:

Tinting board under nut

From pine make a nut!

Tinting of the floorboard made of pine process is thin and delicate. Toning a pine board under the nut - the process of a decent professional who knows everything as and why! These are your floors and your beauty and this is not a place for experiments, samples and mistakes!

Examples and options for tinted pine board Watch photo »

These photos can be seen as absolutely white batten From pine as a result of special events turns into exotic. At this facility, the floors were treated with CO-2 machine, then grinding the trio machine was grinding, mesh 220 were used, the adjunct was used by the flip machine. COLLEROVA was made by oil on zar solvents "using a manual applicator, varnish of the same polyurethane brand. Cost parquet works It was quite acceptable and corresponded to the price.

Skyls from pine, foliage and other coniferous rocks very demanded on dachas and country houses. Pine floor grinding with subsequent tinting will allow you to transform your gender, give the new kind Your home! Options for set-varnish or oil, oak, nut, tick, mahogany or some other color. The choice is yours! For us work, experience and skill!

An example of tinted pine boards in Mahagon watch »

Contact, and you will see the same beauty in my home!

Our specialists will do everything quickly, beautiful and efficiently!

Parquet floors over time wear out and requires capital or cosmetic repair. The easiest and most accessible option is to tint coverage. The procedure allows you to change the color of the floor, update the interior and restore performance features Parquet.

What is a tinting of parquet

Parquet toning is giving a wood-colored wood floorboard or tone update outdoor coating With the preservation of its structure. The technology allows the genital board. The nature of exotic, expensive wood breeds or get the vintage effect of "actions". Using tinting, you will update the old parquet floor and styling it under the interior design.

Toning of genital boards has a number of significant advantages:

• it is possible to carry out processing as a geepboard and parquet;
• the appearance of the old coating is improved;
• toning masks minor defects of the worn parquet;
• allows you to give the room updated, attractive appearance without performing overhaul premises;
• a wide palette of colors, allowing you to choose the desired shade.

Select Color for Parquet: Modern Trends

Modern wood staining technologies are able to implement the most different colors And shades. LCD manufacturers have developed accessible wood processing complexes.

Council. Samples of painted parquet are usually represented in building stores. Making a choice, with it you need to have an interior image to match it with a floor tone and recreate a full picture of the setting.

Traditional colors of tintings include: shades of gold, dark brown, dark red and amber. More bold options: white, blue, black or saturated bright colors.

White color.Such a coating is always in trend, because it is easily combined with different stylistic directions in the interior. White floor visually increases space, dust and dust and small scratches. Before toned parquet in white colorIt must be carefully prepared and removed the previous LKM layer.

Dark tones. It is necessary to choose dark colors with caution - they will come far from every room. Optimally, if the shaded floor is combined with light walls. Toning of oak parquet in dark color Helps hide all the defects of the old floor covering. Black I. chocolate tones Used when designing rooms in modern style directions: constructivism, minimalism or Scandinavian.

Grey or beige colorparquet fill the room with comfort and atmosphere of calm. Such shades look harmoniously in the interiors of the style of Provence, Country, the Mediterranean direction or neoclassicism. Often pastel shades Choose with the arrangement of bedrooms and children's rooms.

Red shades Make the room "warmer" and cozy. They are recommended to apply in the living rooms. classic style. However, such a parquet requires marginal caution in choosing the color of furnishing and other surfaces. Red shades are very whims for flowers-companions.

Brown colorit is considered universal for the design of the floor. The shade underlines the naturalness of the floor covering and the structure of the wood. Brown tones Perceived by a person as a symbol of protection and shelter from adversity.

Important! To toning the floor, you need to use the compositions of proven companies. The use of mixtures of unknown brands can spoil the coating, and the parquet will have to completely disrupt.

The better the toned parquet: features of different technologies

Change the shade of parquet will be in several ways. To work, most often used simulatory, oil, varnish or specially designed staining complexes. The choice of one or another material depends on the desired result and availability of painting skills. Each method has its advantages and disadvantages in terms of applying and operating an outdoor coating.

Tinging parquet varnish

The use of varnishes with a toning component allows you to change the color of the parquet on a couple of tones lighter or darker. For work will suit Ready "color varnish" or a colorless composition with a selected color.

Opening of the parquet varnish is distinguished by the following advantages:

• the material does not penetrate into the structure of the tree - if it is necessary to replace the color, it is enough to consider the top layer and repaint the parquet;
• in addition to the decorative function, varnish performs a protective role, preventing damage to parquet lamellas;
• the ability to control the saturation of the resulting color by the number of lacquer layers.

To the number of lack of "lacquer" tinting can be attributed:

• quickly quickly layer of varnish is erased in the most passable places;
• toning allows you to achieve only weakly and average-saturated tones - to transform with their help, light wood in black will not work;
• varnish is not resistant to long-term loads - the coating can begin to crack and power.

Important! When applied varnish, it is necessary to adhere to the norms of fire and personal safety.

Application of carpet processing oil

For tinting many wood products, including parquet, oil is widely used. The choice of material depends on the type of wood. For the processing of "exotic" wood you need to pick up oil deep penetrationTo speed up the drying process.

The advantages of tinted with oil:

• provided reliable protection Outdoor coating due to the penetration of oil inland material;
• the ability of the parquet "breathe" - a film is not formed on the surface, as after treatment with lacquer;
• the stability of the coating is not exhausting and does not crack;
• a wide range of selection of different colors;
• safety and environmental friendliness.

Disadvantages of oil:

• after primary tinting, the oil subsequently can not use another type of LKM - the oil solution deeply penetrates into the pores, and it will not be completely removed;
• every six months, parquet requires an update - polishing the coating with a soft cloth from natural fabrics moistened in a special composition.

Council. For caller parquet Board Suitable high-resistant oils. Materials have proven well established: Arboritec Floor Oil Strong, Classic Base Oil Color and Arboritec Floor Oil Strong.

Oil impregnation is applied to the floor with a brush or brush, and then rubbed the grinder. After complete drying of the first layer, the surface is processed by the second and third layers.

Features of using the veil

Morida fully preserves and transmits wood pattern. With the help of the veil, it will be possible to achieve color saturation, however, the material will not protect the floor covering.

FEATURES OF THE MAORIKS:

1. Duration of work. The composition is applied three times. The first and second layer should dry at least 3 days, and the last one week. The gender is then covered with a layer of transparent varnish.
2. Due to the heterogeneity of the structure of wood, the veil can be absorbed unevenly. As a result, dark or light spots are formed on the floor.
3. To achieve uniform staining, the subsequent layer is applied perpendicular to the previous one.

Coloring systems for Parquet Tinting

LCD manufacturers do not leave attempts to create the perfect composition for toning parquet. The main challenger today is special staining systems based on natural oils. Corolor systems differ from conventional veils by being slower absorbed and dry out longer. At first glance, such a quality may seem down minus, but it is not.

After applying ordinary simulation, it remains a few minutes to distribute evenly composition on the floor surface. Not everyone gets to do quickly and about good result I have to forget. Coloring complexes dry over 4-20 hours. This time is enough for uniform processing even a large parquet area.

Before starting tinting, it is necessary to test the composition on a separate parquet plate, since the final result is largely determined by the texture, original color and quality of wood processing.

Basic bugs in tinting parquet board

Even if you entrust the pumping of parquet with toning experimental masters You can not always count on the perfect result. The main mistakes of amators and professionals are considered:

Important! Pine - sufficiently complex wood in processing due to the softness of its structure. Minor failures during grinding will lead to the appearance of "divorces" and the bands on the floor. The probability of marriage when grinding larch and oak is significantly less.

How to toned parquet do it yourself: Step by step instructions

The final result of the work will largely depend on the careful surface preparation, namely - cyclishing. The need to perform this phase is due to a number of factors:

• the presence of scratches and local dents on the floor;
• changes in the integrity of the old layer of varnish;
• the appearance of the "boat effect";
• pollution of old coating.

Cyclishing is carried out in two stages:

1. Surface treatment with a cyclical machine or parquet-grinding machine with a rough abrasive. As a result, the upper layer of varnish is removed, pollution is removed and the coating is leveling.
2. Finish grinding with a small abrasive circle.

Upon completion of work, the floor must be cleaned and check that it is perfectly smooth. Next, you can proceed to staining.

Consider step by step, how to toned Parquet Morilka:

Tinting formulations should be applied quickly to prevent the appearance of spots. The base of the floor before staining should be carefully cleaned, as the smallest particles of dust, water, dirt, fat, wax and other things can ruin the result.

1. Parquet Toning - Finishing Stage repair work. After the edge of the floor, you should not finish the ceiling, walls, etc.
2. The toning composition must be applied from professional parquet chemistry producers, such as Osmo, Loba, Bona, etc.
3. It is very difficult to perform high-quality grinding under the tinting of old boards with their own hands. This process is better to entrust professionals.
4. The end result largely depends on the tree of wood. A favorable outcome is 99% guaranteed when tinting oak. For "complex" wood (maple, pine, beech), experts use the "Forced Tinting Paul" method.
5. For uniform distribution and rubbing the composition, it is necessary to apply special parquet machines.
6. The finishing coating is performed by varnish with high wear resistance.

The choice of a parquet floor toning method is desisted to be made after recommendations with a specialist who will take into account the tree of the tree and the conditions for the subsequent operation of the floor covering.

Than toned parquet from beech: video