Options for the arrangement and a good location of the beds in the greenhouse do it yourself. We make beds in the greenhouse correctly: location, width, height, photo

We deliver our own forwarding service. Payment of greenhouses is made upon receipt after checking the configuration.

Delivery to the city below - FREE!

Moscow and the area:

Any gardener wants to have neat beds on their plot, for this specially created metal fences for beds.

These fences will allow you to securely fix the land in the greenhouse. Therefore, when watering, weeding and other works, the Earth will always be in one form, and you will not need to spend time to re-form a bed.

Standard fences can be adjusted in length from 2 to 2.8 m. And having bought an additional insert - 1.9m., You can easily install the fences at the desired distance. They are securely fixed in the ground with supports that need to be inserted.

These fences more period exploitation than analogs from other materials. They do not need to be dismantled for the winter. The edges of the fence bent and therefore are not dangerous when installing and operating. Small fencing dimensions allow them to transport them on the passenger car.

In developing...

Alexander D.

Hello, how is payment for greenhouse?

Good afternoon, Alexander! Payment by cash driver on the fact of delivery. If the order is with the assembly, then payment after the assembly.

1. Anastasia Valerievna

   I am afraid that the Son will not cope with the build of the greenhouse. Difficult to collect it? Can I try and if it fails to collect, already call the brigade?

   Hello, Anastasia Valerievna! Usually collectors collect greenhouse on delivery day. The most difficult and painstaking in the assembly of the greenhouse is to hold the ends. Our masters right at the factory will be able to high-quality ends for 2000r. Specify by phone. The frame itself is collected according to the instructions as a designer. To the greenhouse is attached understandable instruction. You can also find the video assembly video on our site. Got a greenhouse together. If you have some questions in the course of the assembly, you can call us during installation and we will consult you by phone right during the assembly.
   All you need for assembly:

   1. Wrench 10mm
   2. Head magnetic 8mm
   3. Malyary knife
   4. Screwdriver

Contain the greenhouse is not as easy as it may seem at first glance. Warm beds are those that are made correctly equipped on sunny side Greenhouses, and also have certain layers affecting the heating of the soil. Depending on which types of filler will be used, a certain technology is required. That is why it is necessary to approach this issue correctly.

It is important about the beds to think even before the greenhouse will be installed. Since it should be competently located, and experts believe that it is worth choosing a place on the sides of the world. This may affect how many lighting will receive the green part of plants during growing. The shape of the bed can be the most different.

For example:

• Oval;
• Square;
• Triangular.

As a rule, the installation of a new bed is carried out at the cottage from the south to the north. This option is suitable for all cultures and even for tall. Location low rise plants It is best to exercise from west to east. If the land on the area is uneven, then you need to take a landmark for the south, and the landing is to organize perpendicular to the slope.

How to equip beds in a greenhouse in width

The greenhouse can be installed with their own hands.

And you can make it from:

• Flat type of boards;
• Prefabricated metal structures;
• Such material as concerning polycarbonate.

It is important to initially solve what the girling should be in width. To ensure that they are comfortable, the device must be made in a width of 90 cm. If the greenhouse is too narrow, then it is permissible to choose a width of 45-50 cm, some prefer to make a bed of 45 cm wide on the edges and an additional one in the middle.

If the roof double type, then you need to land rise in the middle, and the passages leave along the walls. The width of the ridge should be 150 cm.

It is important to make the right not only the beds, but also the passages. The ideal option It will be 50 cm, which is quite enough to arrange a bucket, a pelvis or stand to sit down and deal with a variation. Many prefer to make a bed around Mitlider (photo and video there are generally available). The method is checked for years, and the experiment lasted almost 50 years. According to the procedure, it is necessary to make a bed, 45 cm wide, and the passages of 90 cm, which will allow plants the maximum amount of lighting and enough air. Landing in this case should be done from north to south. The technique also lies with the exclusion of such a moment, as loosening, as the ground will be without the right amount Light and air.

Budget beds from slate in greenhouse

Today, it is very popular to make the fence of beds from slate. Initially, the idea was needed in order to block the movement of rodents, spoiling a harvest. To carry out arrangement, you need not just to make a bed, but also to comply with another number of recommendations.

Namely:

1. Slate is cut before installing on the necessary parts, and it is better to do it along the plate so that the material seems more effectively.
2. Preparation of the marking of the bed.
3. Around the ridge you need to make a trench, which you need to install borders.
4. The fence is immersed in the trench on half.
5. Slate blanks must be vertical.
6. Next, you need to fall asleep the trench of the earth and be sure to ravibly.
7. In order for the organization of the fence to be carried out correctly, it must be strengthened, and do it by inserting metal pegs.

It is important to remember that it is necessary to install the described fence vertically and stick slate to the ground. Such a feature will prevent the penetration of not only rodents, but also weeds, as well as the spread of the roots of crops grown inside.

The optimal height of the beds in the greenhouse

To grow a high-quality harvest, you need to make a bed, first of all, proper height. No need to choose too high, as it not only looks not beautiful, and can also cause the land cracking during watering, and, with particularly strong, the garden will simply begin to break.

Taking a country household, gardeners set many questions, for example:

• What is the height of the beds better;
• How to arrange beautiful beds;
• How exactly the formation of beds will be carried out.

The ideal option will form a garden, the height of which is about 20 cm. This option is perfect for a warm region, since the usual heat entering the ground naturally will be enough.

If the climate has an unstable temperature, and it is not too warm, especially in the spring, then you need to raise the garden.

The raised soil layers will better warm up and do not freeze. To make high beds, you need to collect wooden boxesIn which the soil is embanked. Regardless of which depth, the bottom of the agriculture is stacked. Optimal height There will be 35-40 cm. Seedlings landed in such raised beds will actively grow, develop and well fruit subsequently. If it is planned to grow early vegetables in a greenhouse, then it is worth making bulk beds or to upset them with a bar, with a height of 80 cm. This contributes to rapid soil warming. It is worth noting that if the beds are high and are located on a well-covered territory, then planting plants without seedlings can be sown.

Warm beds for greenhouse 6 m

If the pillow of wood ash is selected, then the trench must be 40 cm. The pillow will be made of small pieces of wood, bumping trees, logs, crusts, chips and the like components. All components must be perfectly impregnated hot waterThis will contribute to the process of rotting. Wood is covered with dry manure. The hottest and fuel manure is horse. It can warm up to almost 70 ° C, and the temperature will be maintained for a month.

What are the advantages of warm beds:

1. They are more fertile.
2. Plants grow much faster.
3. It is possible to plant culture immediately into the ground, and not to use ready-made plants.

It is strictly forbidden to use fresh manureSince he burns plants up to the roots. It is best to mix it with straw or foliage. It is necessary to dig a trench on one bayonet shovel, and to put the chopped straw or dry foliage to the lowest layer. Additionally, it is possible to use vegetable filler, nutritional waste and even purification from potatoes.

The pillow for heating the garden does not require care, and can be done not alone, but at once there are several such beds nearby.

As a rule, the greenhouse is dragged into three ridges, but they must be narrow, so as not to exaggerate the temperature of the soil. It will be about 7 days to warm up, after which it is possible to lay a fertile soil with a height of 30 cm. Through the use of such warm beds, you can speed up the process of plant development for almost a month, and significantly increase the harvest.

Modern beds Rosuma V.N.

Today very in demand warm beds Rosuma V.N., which, thanks to its own research, brought the methodology on which large top quality crops are grown. The idea for this master was an abandoned vegetable garden and non-heavy earth. Having achieved excellent results, the rose began to distribute the idea that since the emergence began to gain popularity.

Grocery warm view Have a specific classification:

1. There are blurred structures that are shut-off by removing the top layer of the Earth - turf. Trench turns out, and then it falls asleep with organic substances. From above, the garden must be filled with fertile soil, which is compared with the level of removed soil.
2. There are raised type beds that are formed in boxes. In this case, a box is made from slate, boards, or any other material, and then the container is also filled with organic substances.
3. There are beds warm combined type. The lower layer is bundled to the ground, and the upper part is in a raised form.
4. Warm beds in the form of elongated hills require the removal of the upper layer of soil, but not required to make a box. Organic substances Put right on the ground.

There are many reasons to make rose beds, and it is worth familiar with each separately. The demand of the beds is growing due to the fact that their creator is a trainee organic farmingand he is on personal example Proved that its methods work. You can make fertile even the most poor-quality land. They are especially good for the lands, in which many years did notice landing and only weeds grew. Through. special technologies, You can make an excellent soil from such a soil literally for season 2. Permissible to do good garden Even from a school area.

The yield of such beds is simply incredibly high, and they are suitable for growing completely different cultures, especially for tomato, peppers and the like plants. It will not need too much strength, time or nerves to make fertile soil. In other words, the garden is done 1 time and all the time, and then it is simply used every year.

You can create such beds in different seasons, both in spring and summer or autumn.

What else is the popularity of rosum beds? Their feature is that each bed is a whole supply of knowledge, wisdom and research on organic fertilizers Specialist Rosuma. There are basic principles that are important to consider when creating warm beds. Processing the soil is needed using flat. It is necessary to carry out mulching and composting. You can grow plants, even if the place is not too well light. The edge effect is created. Can be carried out mixed planting. Plants will have protection against plants and pathogenic bacteria.

How to make a bed in a greenhouse (video)

How exactly to make a warm bed? You need to carefully follow the instructions and recommendations of the specialist. Only in this way, you can achieve excellent results and make sure your personal example is that the rosema method is really effective.

Examples of beds in the greenhouse (photo)

The question is how to make beds in a greenhouse correctly, relevant for novice gardens. Competent calculation significantly increases the harvest, facilitates the care of plants and optimizes inner space. Alteration initially incorrectly generated Groz - the process of time consuming. When planning, be sure to consider the size of the greenhouse, orientation relative to the parties to the light, the terrain, the requirements of crops that plan to grow, as well as the desired timing of the harvest.

Greenhouse for dacha

Features of accommodation beds in greenhouse

The placement of the garden depends primarily on the construction methodology of the greenhouse and its size. For example, in polycarbonate structures, 3 meters wide, correctly and most rationally equip 2-3 rectangular beds, in dome and geodesic - several semicircular. Although the basic principles of formation are similar to different options Greenhouses.

Greenhouse 3 for 6 inside

Circuit breaker in greenhouse 3 on 6

On the panstones Rectangular greenhouses are often built. The process of their structures is quite simple, especially if used polycarbonate. Grow plants with such a layout can be both on earth and on racks. For example, familiarize yourself how to locate a garden in greenhouse 3 by 6 meters. There are several ways of rational accommodation in the construction of this size:

1. Two wide fittings along the walls and a wide passage between them in the center of the greenhouse.
2. Two narrower ridges along the walls, one wide in the center and two passages between them (for example, side - 40 cm, central - 100 cm, passages - 60 cm) - layout 3 + 2.
3. Three narrow ridges and two broad passages.

Planning GROW 3 + 2

Also pay attention to the following points:

• Processing cultures without stepping into aisle, respectively, the landing width should not be too large (optimally up to 1 m).
• The central ridge can be wider than the side, because it is possible to care for plants here on both sides.
• Make wide passages (at least 60 cm), especially if you plan to use a wheelbarrow.
• Consider that part of the side of the passage will take the boring tops of plants.
• Leave your free place near the entrance to the greenhouse, that is, the central landing do shorter than the side.

Location scheme in a greenhouse

Placing a garden in a greenhouse 3 meters wide in the photo helps to understand the planning scheme.

How to locate a garden in Teplitsa by Mitlider

The method of location of the beds on Jacob Mitlider is becoming increasingly popular among domestic vegetables. The reason for this is understandable - the yield of cultures grown by its technology increases significantly, despite the decrease in the actual area occupied by plantations. When introducing technology in personal greenhouse, pay attention to the following points:

• landing orientation - exclusively from north to south;
• the width of the ridge is 45 cm, the planting on it is made in two rows, therefore, the plants are well ventilated and obtained maximum sunlight;
• the width of the passage of at least 90 cm;
• the surface of the soil must be perfectly smooth to ensure a uniform distribution of water and fertilizers;
• on the edge, make a side (can be earthen), about 10 cm high;
• be sure to consider the watering system and fertilizer.

Narrow ridges by mitlider

If the greenhouse stands on the plot with high levels groundwaterInstall the box taking into account the parameters described above, fill them with a special soil (select the composition depending on the plants planted) and get an excellent modification of the MitLider method.

By the way, the height of the beds in the greenhouse depends on the peculiarities of the soil of a particular region and can range from 10-20 cm (if the soil is not swollen) to 60 cm (in wetlands, especially if you plan to grow root roots).

Placement of beds relative to the parties of the world

Choosing a scheme how to make a garden in a greenhouse, do not forget to consider the side of the world. Correct orientation will help distribute sunlight So that all plants receive the maximum possible amount of sunlight. This will have a positive effect on the crop and significantly reduce the costs of artificial lighting.

Two options for the orientation of greenhouse landings can be distinguished:

• from west to east;
• from North to South.

Orientation of greenhouses on the sides of the world

The first option will be successful when planting tall cultures, such as tomatoes. In this case, sun rays They will be distributed between rows of plants, evenly illuminating them. For little varieties Or with mixed cultivation, orient the ridge from the north to south. Wherein high plants Sit near the northern wall. Sometimes the sides of the light fails. For example, if the greenhouse is located on an uneven plot, make the garden across the slope.

Basic principles of breakeing

The process of arranging the greenhouse is quite simple and can even be a novice gardener. The main thing is to learn the theory. Knowing the main important moments Without difficulty, you can make it yourself even warm beds for tomatoes and cucumbers to surprise the early harvest of all neighbors and acquaintances.

High ridges in a greenboard

Optimal width and height

The breeding device in the greenhouse is simple, although before it starts pay attention to the characteristics of the soil, the level of groundwater and the features of crops that will grow. These factors directly affect the height:

• High ridges, a ridge-box (a height of 40 - 60 cm) - will be appropriate on wetlands or poor soils, especially for growing root crops. They allow you to use special soils and change them if necessary. Such beds quickly warm up in the sun, but also quickly enhance, so they will have to water them more often.
• Raised ridges (20 - 30 cm high) - suitable for poor not marshy soils, ideal for crops with a surface root system (type of cucumbers). They can also be filled with nutrient soil.
• Low chickens (not up to 10 cm not elevated to 10 cm) are suitable for fertile soils with low groundwater levels. The minus of traditional primer beds is that they cannot be filled with the necessary soils, so some vegetables make deepening on the place of future landings, boils and fall asleep with the necessary soil.

Narrow passage- unsuccessful decision

The width of the beds and aisles between them are very important parameters that significantly affect the yield. Too wide ridges and narrow passes will make it difficult to care for plantings and harvesting, reduce the amount of sunlight, which will fall on each separate plant, and also worsen ventilation between plantations.

• The beds need to be processed without stepping on them, so those that are located near the walls are not wider than 50 cm, and those that have access from two sides - no more than 120 cm.
• Selecting the width, take into account the features of the cultures that will grow, and also the fact that plants in the greenhouse are very growing. Two rows of landing on the garden are enough for high-quality processing.
• Leave the passages with a width of 60 cm, consider that the part of them will hide the foliage and plant stems.

High landings easier to care for

Galvanized beds for greenhouses

Technology does not stand still even on cottage plotIf earlier the greenhouses were made of glass or film, now the polycarbonate came to replace them. This material is easily mounted, it is more accessible than glass and more reliable than film. How to make beds in a greenhouse from polycarbonate so that they are functional, beautiful and durable?

Usually, the sides are made from undergraduate materials: boards, slate, brick. Only here they all have shortcomings: the boards quickly come into disrepair, slate - not decorative and not environmentally friendly, brick - expensive material, and its installation requires a lot of time and strength. Most recently, galvanized flights appeared on the market, which in their characteristics have no analogues yet. Here are some of their advantages:

• durable;
• environmentally friendly;
• resistant to exposure high humidity and high temperatures;
• aesthetically attractive;
• do not amazed fungi and mold;
• easily collected and disassemble.

Installation galvanized

In addition to zinc coating, additional substances that make it resistant also to corrosion are applied to the metal of sides. A rather high price is the only minus of galvanized fences, but it is leveled if you consider that they will serve not one year.

Reasonable use of vertical

Countryhouse - the construction is not very big, and you want to plant there more. How to make beds in a greenhouse in order to maximize useful volume? Specialists advise the use of racks, suspended porridge or make vertical landings. It can be grown in this way annual plants With a small root system, such as spicy herbs, salad, strawberries, redish, onions.

Check out the features in different ways Filling vertical in the greenhouse:

1. Racks. Planting Place in pots or build shelves with sides and pour the soil immediately there. The last option is beneficial for growing one culture, for example, onion. Do not make the rack too wide, it makes it difficult to care and worsen the lighting of the lower shelves, the perfect width is 40-50 cm. Upper shelves use to grow seedlings (young plants are more sensitive to lack of light), and space under racks - for storing the tool.
2. Suspended caspo. Use for growing decorative ampel plants, strawberry, beans, peas. Follow the irrigation, because the ground here dries faster than on ordinary beds, and do not hang the pots too high in the summer (under the ceiling in the greenhouse is too hot, plants can burn).
3. Vertical landing. There are quite a lot of ways to implement this option. For example, you can use gutter, cut pipes, plastic bottles, Pots. Secure them on the frame, fill the soil and plant the plants. Or use dense nonwoven materialBy tailoring from it a hanging wall with pockets. Several modified wooden pallets You can also adapt to landing.

The main minus of the three described options is that the earth dries too quickly. Solve this problem with hydroponics or drip watering. To save time and strength you can purchase ready-made phytomaodules for vertical landscaping from automatic system glaze. Second essential flaw - Fast soil freezing. Therefore, plan the annual culture, heated the greenhouse or hide the pots for the winter.

Secrets of the device warm bed

Warm beds are one of the most popular among domestic gardens. They allow you to receive a yield for 2-3 weeks earlier than using conventional landings. In addition, plants are practically not affected by diseases and pests. To build warm beds in the greenhouse with their own hands as follows:

1. Make marking.
2. Remove the grass and the top ball of the soil to a depth of 10-15 cm.
3. Put the trench with sand or rubble for drainage (necessarily for regions with a high level of groundwater), you can put a small mesh to protect against rodents.
4. Install the flights with a height of about 70 cm.
5. Run the twenty-sentimeter layer of coarse material: thick branches, roots. Top to put 5-10 cm smaller branches, sawdust.
6. Put and sink leaves, grass, shot, straw (about 5 cm thick).
7. Make 15 20-centimeter Ball Fresh organic Waste (Cleaning, healthy plants tops (except tomatoes and potatoes) grass), compost, humus and bird litter.
8. Pull the prepared soil (land, humus, peat, sand, fertilizer), take into account the needs of plants disembodied.

Bookmark Trench Grokes

At the stage of structures, wet the organic layers well, it contributes to the processes of decomposition and, accordingly, heat isolation. Do not forget also to water well, because high beds enhance pretty quickly.

To save water and if the characteristics of the soil are allowed on the site, you can create a trench warmer bed. The principle of operation is similar with the balls described above, only the balls are placed in a trench of a depth of 40-45 cm with installed sideboards.

Warm bed for greenhouse

Video: how to make beds in a greenhouse

If the process of creating a variety seems to be something very complex and confusing, then browse the video and make sure that it is not. A roller from an experienced vegetable vegetable will tell about the peculiarities of the greenhouse, the rules of air, as well as how to create warm ridges in the greenhouse itself.

Video: location of beds in a greencarbonate greenhouse measuring 3 to 6

Video: Creation of warm beds in the greenhouse

Video: Arrangement of polycarbonate greenhouse

Growing vegetables in the greenhouse, both for family needs and for sale - a profitable occupation, the main thing to comply with the advice of specialists. Create the right ridges in your greenhouse and rejoice in large harres of environmentally friendly products.

Hello. Tell me, what is better to make fences for greenhouse beds? I would like the material to be not only durable, but also appeaset? Sincerely, Oksana Aleksandrovna.

Hello, Oksana Aleksandrovna! What only materials do not use dacms for the device fencing the beds, located both in the greenhouse and on open soil. The simplest and most affordable material are boards, but, alas, they quickly rotten, especially in greenhouses.

Important! In order to extend the life of a wooden fence in high humidity and high temperatures, gardeners annually process the disinfecting solid boards. For which in 12 liters of water, 400 g of chlorine lime is breed and the solution is left for 4 hours to insist. Then drain the liquid and spray it all that requires disinfection.

Using flat slate

A good alternative to a wooden fence is a flat slate that does not rot at all. For fixing sheets flat slate experienced dacnis They advise not to use wooden pegs, but segments of pipes or reinforcement rods. Alternatively, you can use and wavy slate For these purposes.

Use of concrete and brick

Often, when installing stationary greenhouses from polycarbonate, the fermentation fence and the track between them are poured concrete. Brickwork Also allows you to create a neat and fairly sturdy frame for greenhouse beds.

Finished team-collapsible fences

The best solution to the problem of the fence of any beds, including greenhouses, prefabricated products from metal having a galvanized and polymer coating.

Similar fences are different colorsWhat makes a greenhouse not only practical, but also attractive, building. Serve these fences are several decades. Transported in collapsible on light carthat is convenient to all dackets. If desired, the design is easily increasing, both in length and height. Cost, of course, corresponds to the possibilities.

The dream of any gardener is its own greenhouse. Competently built, the so-called winter garden is a pledge good harvest round year. Having decided to deal with independent cultivation of vegetables and fruits early gradesFor a start, it is necessary to determine the type of future greenhouse, the number of beds and their location.

When planning the construction of greenhouses on its summer cottage, it is important to take into account the following parameters, such as: the environmental friendliness of the materials from which the greenhouse will be built; weight design. It is better to choose the lungs by weight materials for building greenhouses; svetopropusability. When arranging the greenhouses should choose materials well transmitting sunlight, but at the same time protecting crops from the destructive effect of ultraviolet rays; affordable materials price; ease of installation of greenhouse design; resistance to temperature drops. Planning Gerlitz Deciding with the materials of which the greenhouse will be erected, it is necessary to decide with the form of the future building. There are several charming frame options: Double frame when the height of the greenhouse prevails over the width. As a rule, trees are grown in such greenhouses. In the center of the greenhouse placed the garden, and the passages on the sides. The advantage of this type of construction is that when plants are planted in the center, without touching the cold walls of the greenhouse, warm air Equally distributed to all seedlings. Greenhouse in the form of arch. This is the most frequently used type of greenhouses. With a slight height, arched Teplitsa Faster heats up from the inside and retains heat. It successfully planted seeds of flowers and vegetables. As a rule, such a greenhouse is planned with two beds on the sides and path in the center. Greenhouse - geodesic dome. Round construction The greenhouses implies one large bed wide a little more than a meter located along the walls. The beds are fenced with high sides. In the center of the dome wide passage. Usually in the center of such a design, there is a container with water watering. Most often, polycarbonate preferred as the main material for the greenhouse of Gardeners due to its indisputable benefits, such as: ease; ease of installation; much stronger glass and polyethylene; protection of crops from ultraviolet rays and uniform distribution of light; creates favorable conditions for high-quality plant growth. Unlike glass and polyethylene greenhouses, polycarbonate is able to store heat for a long time. It is resistant to temperature drops, and the forty-portous frost is noted. The service life of polycarbonate greenhouses is up to 15 years. Naturally, the more the seedling will receive light in the process of growth, the better the crop will be. To install the greenhouse, it is important to choose the place completely illuminated by the sun, where the rays can be distributed evenly, lighting the entire greenhouse space. The most acceptable placement of beds in the greenhouse - on the sides of the walls placed to the sunrise and sunset, and hence - from the north to south. Distribution of beds in the greenhouse Before making a garden in a greenhouse, you need to properly choose the structure of the structure, that is, for certain species of plants - its own. But most often you have to adapt to the greenhouse already existing in the house, or purchased. In a narrow greenhouse, the width of the beds on the sides make such that it is convenient to come to them to come up or carry out a garden trolley between them. As a rule, these are two beds of 95 cm, and in the middle of the track. If the design of the greenhouse is still already, then you will have to sacrifice either the width of the beds, or the passage. As practice shows, plants are more comfortable in close beds. In a wide greenhouse, it is more likely to layout in this way - three beds and two passages. The central beds are usually wider than the side, however, does not exceed 1.5 m. Passes are made 50 cm. Parameters of beds in the home greenhouse Such a parameter as the width of the beds in the greenhouse is an important factor For the convenience of working with young plants. There are no most acceptable schemes and sizes of beds, and each gardener is adjusted under the dimensions of their greenhouses. Location options in the width of the greenhouse: Wide beds along walls with aisle in the center of the greenhouse. In such a layout, you only need to follow the size of the passage so that it is convenient to carry buckets with water and garden tools. Three equal beds. As mentioned above, in narrow beds, flowers, fruits and vegetables are much more comfortable to germinate than in wide. Therefore, this variant of the distribution of the beds is most practical. Wide bed in the center, and narrow - along the side walls. With such a layout, you can move freely between rows and processing crops. Two beds and two passages. In this form, the passages are located along and across. The advantage of this method is the possibility of free access to plants. Disadvantage - less space For plant landing. Crying in the form of pyramids. Such beds are ideal for disembarking strawberries and colors. Water tank for watering plants It is advisable to have inside the greenhouse so that the temperature of the fluid coincides with the temperature indoors. You can see how the beds look in the greenhouse in the photo. The height of the beds in the greenhouse according to the standard - 20 cm. It is achieved by filling the ground of space, limited by wooden sides. With intent to grow vegetables estimal varieties, the height must be increased to 80 cm, soil will warm up faster. But at the same time, watering such a bed must be frequent, as the land in high Groke Quickly dries. In addition, the roots of the plants are not "cold" during the cold season, bedding in the greenhouse can additionally insulate the electrical heating system. Warm beds in the greenhouse Thanks to the creation of an organic insulation, which increases the temperature of the air in the room of greenhouses and soil, seedlings can be placed in beds a month earlier to the latter period. Options for arranging organic insulation for beds: Dung layer. Insulation konsky Manuza The most effective in terms of soil soil. In case of decomposition in the first few days, it warms up to 70 degrees, and the days twenty still holds 30 degrees. It is also suitable cow manure Or pork. For the intensity of the rotation process, part of the straw and sawdust must be added to the manure. The first layer in the future beds are lined with sawdust (15 cm), on top of the dung layer (30 cm). After that, the future insulation is poured boiling water. A couple of days is given to this mixture for the start of rotting, and when the duration of the manure reaches 45 degrees - you can begin to form warm beds in the greenhouse. Two days later, the manure is covered with a layer of land. Heater without manure. In the absence of manure, it can be applied and always affordable materials - Wood chips and waste from food. The bottom of the garden is distributed a layer of peeled tree branches, bark and sawdust. Herb is laid on it, potato peelings etc. The third layer will be foliage, rags and paper. The rammed future insulation is poured by chicken litter, divorced water. Then everything is covered with a film for rotting. Seven days later, the finished insulation is covered with a layer of land (30 cm), in which plants can be planted. Fencing beds in greenhouse So that the soil does not pumped out, to give shape beds, their edges need to be fencing. You can use all sorts of devices as portors, such as: Warm bed in greenhouse. Video