Do-it-yourself concrete flower pots are large. Concrete flower pots. DIY flower pot garland

Creating unusual flower pots with your own hands from cement and various fillers, House master not only makes a container for plants: casting and subsequent processing of a container made of concrete is a creative process that requires both imagination and the ability to notice details, combine the shapes of the pots and what will grow in it. The result of the work done can be a real work of art. Its difference from the most elegant plastic pots from the store lies in the originality of the design and the individuality of the author, which he conveys to the manufactured item.

Basic material for all concrete work- cement. The strength of the structure, no matter how large it is, depends on its brand. Flower pots are no exception. In order for self-sculpted cement pots to last longer, it is best to take cement grade M400 or M500. To make a flower container, you will need the following materials and tools:

cement;
seeded sand, fine;
containers of different sizes and desired shapes;
moss, peat, colored plastic granules (aquarium soil), shells, pebbles, etc.;
drill with mixer nozzle.

If there is no suitable filling container concrete mortar, then you can make any shape with your own hands from a durable moisture-proof material - plywood, tin, thick cardboard.

The larger the finished product, the more durable material you need to choose, because concrete is a very heavy substance.

Insufficiently rigid walls of the mold under the weight of the cement mortar can be deformed, violating the original intention of the author.

This is especially important if you want to get a product with smooth edges.

simple flowerpot

It takes 2 to make it. plastic containers: bigger and smaller size. The wall thickness of the future product depends on the difference in size. A large form must be covered with any oil (machine, vegetable) on the inside so that the hardened mixture can easily separate from it. The inner, smaller form can be left as an insulating layer instead of being removed. An excess amount of substances that reduce the acidity of the soil cannot penetrate through plastic into the soil for planted flowers, and moisture during irrigation cannot enter the pores of concrete. This is important if the cement flowerpot is installed in the garden: concrete saturated with water can collapse very quickly in severe frost.

Before you make a flower pot with your own hands, you need to take care of the drainage. To do this, on the bottom of a larger container, pieces of a tube, bars or other objects lubricated with oil should be placed no more than the desired bottom thickness.

Prepare a mortar from 1 part of M400-M500 cement and 3 parts of sand. If desired, decor in the form of a shell, colored granules, etc. can be added to the mixture. It is necessary to pour the mixture first onto the bottom of a larger container, straighten the bars and install a smaller form on them, trying to equalize the gaps between it and the large container. Put a weight in the inner container that will not allow it to rise when pouring.

Concrete should be poured into the gaps between the forms and compacted a little. Gradually, compacting each layer, continue pouring until the gaps are filled to the desired height. Leave the product to set for 12-14 hours. After that, it can be carefully removed from the larger container and the bars removed, cleaning the drainage holes. If inner shape I want to leave it inside the pot, you will need to cut its bottom over these holes.

The outer surface of the container must be cleaned with a drill attachment for grinding (round hard brush with metal bristles). If the concrete had decorative elements, this will help to show their structure. With a brush, you need to process all the edges and corners of the container, eliminating burrs and irregularities. After that, the flowerpot can be painted or decorated with ceramic and glass elements by attaching them to ordinary tile adhesive.

Products from hypertufa

Hypertufa artificial stone is the same concrete, but with slightly different fillers. The binder can be taken as ordinary M500, as well as white or colored cement. This will only depend appearance finished product, since the strength of the listed materials is almost the same.

Instead of the sand used for conventional concrete mix, when creating hypertufa, agroperlite is used - a volcanic mineral that can absorb water into in large numbers, gradually giving it to plants. You can buy it in horticultural organizations if you want to make cement pots with your own hands using this technology. Instead of perlite, you can take vermiculite or fine expanded clay - in each case it will be a different texture of the material and a completely different visual effect.

Another required component mixtures - high-moor peat, used in horticulture as a material that gives the soil porosity and breathability. Peat also has a high ability to absorb moisture and easily release it in case of increased dryness of the environment.

To give strength to hypertufa pots, a wire frame is also needed if the flowerpot is of a large capacity (5 liters or more). For small pots, you can add a thin synthetic fiber directly into the solution, cut into pieces of 5-7 cm. The pot is made in the following steps:

1 Mix the dry components of the solution (2 parts of cement, 1 part of perlite and 2 parts of peat) and add enough water to make the mass look like softened plasticine.
2 Line the mold with plastic wrap. The formation of wrinkles should not be avoided - they will give the outer surface of the flowerpot a resemblance to natural stone.
3 In some places, to give a decorative and aged look, you need to lay pieces of ordinary dry moss. This material will look organic on a flowerpot in the garden.
4 Put a little mass on the bottom of the container and stretch it with your hands, forming a layer about 5 cm thick. Make holes for drainage.
5 Adding a little concrete mixture, sculpt the walls of the pots according to the shape, raising them to the desired height. If a wire frame is needed, it should be installed at this stage and the mix should be applied further by dipping the wire into the concrete. edges and inner surface process with a damp sponge, leveling it. Finished construction cover with polyethylene and stand for several days until it becomes light.
6 Rigid wire brush or with a nozzle on a drill, treat the surface, revealing its microrelief.

It is better not to paint such a pot, since its surface is very similar to natural stone, but if you wish, you can slightly shade the depressions and brighten the convex places if the product is made of white cement.

A hypertufa pot weighs a little less than a cast concrete pot. But when sculpting a large container, it is best to perform all operations immediately at the installation site, since the transfer may not be possible.

DIY flower pots made of concrete or hypertufa can decorate both the interior of a room and a place to relax in the garden, and entrance group. Plastic material allows you to create containers by yourself different shapes, which may be required by the designer. You can decorate a cement pot with stucco elements from the same mass, and by gluing ceramic parts on top, and by including the decor directly into the solution. In each case, it will be a new effect and a unique surface pattern.

Design decoration garden plot is milestone, which allows you to turn inconspicuous flowers and plants into a whole work of art. It is not difficult to make flower pots from cement with your own hands - a master class will allow you to master the manufacturing technique various options. These are a kind of flowerpots for growing flowers. They make the vegetation more vivid and unusual, add sophistication and style to the overall design.

Cement garden planters

If you want to make a cement planter with your own hands for the garden, then you should first consider the important rules and features of the manufacturing process. It is quite simple, but still there are some principles that must be observed.

For making flowerpots or flowerpots big size you will need to prepare the following components:

a form of plastic base, the size of the diameter should be 53 cm, and the height should be 23 cm;
the solution will require white cement, perlite (agroperlite), high-moor peat;
oilcloth or cellophane, you need to take a bag or cut that will cover the entire surface of the plastic container;
metal wire frame or reinforcing structure;
cleaning brush.

To make a cement pot with your own hands, you should consider a master class, which is carried out in several stages:

First you need to make a solution. It will require 2 parts of white cement, one part of perlite (agroperlite) and two parts of high-moor peat. For measurements, it is better to use a bucket with a volume of one and a half liters.
Next, the dry components are poured with water and stirred until a homogeneous consistency with a thick structure is formed.
We line the bottom and walls of a plastic flower pot with cellophane or film. It should completely cover the container to the very top.
When spreading the cellophane, it is important to straighten it, it must be even, otherwise incomprehensible folds and bumps will remain on the finished product.
First of all, we spread the solution on the bottom of the pot, level it well. The layer thickness should be 4 cm, you can control it with a match or a toothpick.
To make the structure strong, it is required to install a metal wire frame or a reinforcing structure.
Since the product should turn out to be large, the solution will need to be kneaded fractionally, in parts. In general, it will take about 4-5 batches.
Be sure to consider a drainage hole. To make it, you need to put a cork on the bottom, which is pre-wrapped in a film.
After the entire surface of the container is lined with cement, everything is covered with a film and left to stand for about 10 days. During this period, the cement mixture will harden and gain strength.
If the surface dries out, then it needs to be slightly moistened.
After about 8 days, it will be necessary to check the readiness. To do this, the surface of the cement needs to be tapped a little, if the sound is not deaf, then the pots are removed from the container along with the film;
Next, the surface of the product is cleaned with a metal brush.

If you want to make a colored planter, then you will need to purchase special dyes. To do this, each part of the cement is painted in specific color and posted piecemeal.

How to make a planter out of cement and fabric

To decorate the site, you can use a variety of elements - pots, flowerpots, planters. They can be made by hand, especially homemade products are bright and original. For this reason, it is imperative to know how to make planters from cement and fabric. This will allow you to perform a real work of art from improvised materials.

To make a planter out of fabric and cement with your own hands, you will need to prepare the following tools and materials:

The basis for the preparation of the solution. Better to use a budget option- Portland cement brand M400.
blank. As it can be used tulle, terry towel, burlap. It is advisable to use embossed fabric, it will allow you to make a brighter and more unusual planter.
Any paint for concrete surfaces. Acrylic, water-epoxy, polymer, vinyl, acrylic-silicone or lime coloring mixture can be used as it.
Paint brushes.
Fine structure polyethylene packaging film. A simple stretch film can be used as this component.
The form in which the pots will be made from a rag and cement with your own hands. A conical bucket or any other container that has a conical and pyramidal shape is perfect for this.
The container in which the cement will be kneaded.
To stir the solution, you can use an electric drill with a mixer nozzle.

The process of making flower pots from cement with your own hands is not particularly difficult, a detailed master class will help with this. It consists of several stages:

Preliminary form for planters, it is recommended to completely cover with a film. This is required for the convenience and possibility of removing the finished cement product.
A cement mortar is made in the tank. First of all, water is poured into it, cement is poured into it. Using a drill with a mixer nozzle, the solution is kneaded.
The finished solution should not turn out too thick, in consistency it should resemble something between milk and sour cream.
The fabric is dipped into the solution, it must be completely immersed in the cement base.
It is better to leave the fabric in cement for a while so that it is well saturated.
Next, the workpiece is removed from the solution and thrown onto the bucket. The edges should be straightened, you can create folds to make the pots more vivid and original.
After about 3 days, the pots can be removed from the container.
The surface of the product is painted with any paint that is intended for concrete.

Cache-pot for flowers in the form of a shoe

It is worth noting! On the site, a planter in the form of a shoe will look beautiful and unusual. It will give the vegetation sophistication and grace, and the garden will be transformed beyond recognition. Of course, manufacturing will require time and effort, but the result is worth it.

To make a planter in the form of a shoe, it is worth preparing the required elements and materials:

plastic cans;
threads with a thick structure;
self-tapping screws;
wide adhesive tape or tape;
PVA glue;
several packs of newspapers;
the basis for the solution is cement and sand;
water;
egg trays.

If you do not know how to make a cement planter shoe, then the master class can provide a quick and easy mastering of the manufacturing technique. Especially on the Internet you can find detailed video with a description of the process.

So, the whole work consists of several stages:

for work, you will need two canisters for 10 liters and one for 1 liter;
along the lines that are drawn on the canister, we cut it off, and leave one whole;
we install another on the side of one canister and fix it with self-tapping screws, and then wrap it with tape;
further from the bottom of the structure it is required to make several holes, this is necessary to ensure drainage;
with the help of small pieces of newspapers, PVA glue and papier-mâché technique, we give the product the shape of a shoe;
then a solution is made, it is made from 1 part of the mixture, 3 parts of sand and water, stir well;
after the form from newspapers is ready, we screw self-tapping screws along its entire lower surface from two sides and tighten it with threads, this will ensure the best stability of the cement mortar on the surface of the form;
the form can be pre-treated with a primer;
then we apply cement on all surfaces and level well, leave the product to dry completely;
after the shoe dries and becomes strong, it must be sanded;
at the end we cover with a special paint for concrete.

The finished planter in the form of a shoe can be used as a decoration for the garden plot. It will give it brightness and positive notes. The vegetation in it will look stylish, elegant.

Making a planter out of cement and rags is a fun activity that will entice many. Everyone can make this product, even those who have never made structures of this type before. The main thing is to carefully study the instructions and the basic rules of manufacture.

Step-by-step production of planters from fabric and cement

Do-it-yourself planters made of concrete are not difficult to make, the main thing is to have a concrete mixture on hand. The main components of concrete are cement, sand, crushed stone and water, but we will do without crushed stone, we will exclude it from the preparation of the mixture. The created planter made of concrete is ideal for cacti. As you know, cacti grow in a rocky desert against a mountainous terrain, on rocky ledges. So, a concrete planter resembles a rocky ledge - a native arid place for thorny plants. For work, you can use sea or river pebbles, fragments broken plates, shells - all this decorates and decorates a concrete planter self made. Watch the master class and be inspired by hand-made to decorate a garden or a summer house, especially since spring will come very soon and all our efforts will be aimed at ennobling a summer cottage or garden plot.

How to make pots out of concrete with your own hands.

For work we need:

concrete mix,
plastic, aluminum or enamel bowl required size,
plastic bag,
sea or river pebbles,
shells, fragments of broken plates,
latex gloves,

Let's get to work. For concrete mix we take cement, sand and water. To create a planter with a capacity of 0.5 liters (meaning a bowl that will serve as a form for concrete), we need 1 kg of cement, 0.5 kg of sifted sand and 0.4 liters of water. Put on protective rubber gloves. Cement is mixed with sand and poured with water, kneading a thick concrete mixture. We put the bowl upside down on a plastic substrate, close it with polyethylene.

The concrete mixture must be thick enough, not liquid, it must not flow during operation. If you get a liquidy composition, add more cement. We begin to cover the bowl with concrete mixture, starting from the bottom edge with upward movements. The thickness of the concrete mixture should be no more than 2-3 cm. We smooth the entire surface with our hands, slightly wetting the gloves with water. Don't forget to make a hole in the bottom of the pot.

We decorate the pots with shells, pebbles and fragments of broken plates.

We leave the concrete pots to dry, this will take about two days at room temperature. After drying, we remove our bowl from the cache-pot. The finished planter can continue to be decorated along the upper edge with pebbles and shells. To do this, take a little cement and water, knead the mixture and decorate the edge of the pots.

That's the whole master class) We put a substrate for cacti in a flower pot created by our own hands and plant our prickly plants. Good luck to you!

When copying, an active link to Handmade-Paradise.ru is required! You can send this post to social media and bookmarks: Do you want to receive master classes and new handmade ideas by mail? Subscribe to daily site updates:

handmade-paradise.ru

How to make DIY cement and fabric planters for outdoor decoration

Cache-pot - a hollow decorative vessel for a pot with plants. Most often they are made of plastic, wood or ceramics, you can even make it from a rag. For street decoration, they use a more durable and resistant to various natural conditions material. So, cement pots will serve you for many years. Therefore, we propose to learn how to make flower pots from cement and fabric with your own hands.

Differences from the pot

Before you get started, you need to know fundamental differences pots from pots.

Both of these elements can be done in interesting ways. design solutions. The main advantage of planters over flower pots is that there are no holes in the pan. It turns out that when watering, you will not need to ensure that water mixed with earth does not flow onto the surface of the furniture.

However, it is worth noting that some types of flowers do not like stagnant water, excess moisture from the pots may need to be removed.

Particularly popular are hanging planters:

Getting Started

Street planters, as mentioned above, are best done from durable materials. This master class will be devoted to flower pots made of cement and rags.

Upon completion of the work, you should know that the cement planter is easily decorated. acrylic paints.

In order to make such a street planter, you will need:

concrete mixture (cement + sand + water);
old rags;
bucket;
protective gloves;

The manufacturing method is extremely simple (given with a description).

It is necessary to take an old rag (moreover, the more full of holes it is, the more interesting it will be final result), thoroughly moisten it in the concrete mixture and throw it on an inverted bucket. A rag is the frame of the future flowerpot.

As a basis, you can use any other object of the desired shape. It remains only to wait until the product dries well. If desired, it can be decorated with paints.

A few photos of finished pots:

In order for the pots to turn out to be the most durable, you should not rush, you need to give it two or three days to dry completely. Such a product will withstand any weather surprises.

Video on the topic of the article

Look for even more ideas for DIY flower pots in the video selection.

knittochka.ru

Crafts from cement for the garden: more than 20 ideas, instructions and workshops

Having country cottage area, you always want to equip it, and even somehow in a special way. However, garden decorative elements are not cheap, and they do not differ in durability.

People with a developed imagination can do original crafts for a cement garden, which is distinguished not only by its high resistance to various kinds of influences (frost, hail, sun, water), but also by its availability (you can buy it at any hardware store for an affordable price).

The nuances of working with cement mortar

For decoration and design additions, you can use flower pots, planters, figurines fairy tale characters or objects flora handmade from cement. This material is not whimsical, and most have little or no experience with it. Yet there are several important rules, which must be observed in order for cement mortar crafts to be of high quality and durable.

The technology for preparing the mixture itself is as follows. The main components are being prepared: cement, building sand, water and tile adhesive (for better ductility and reduced risk of microcracks). For 1 part of cement, 2 parts of sand are taken (for greater strength, you can take 1 part) and 1 part of glue. Lastly, water is added in small portions until the consistency of thick sour cream. It is convenient to work with such a mixture: it does not drain and at the same time it is quite plastic.

All cement products require prolonged drying. Freezing can last up to 7 days. To prevent the surface from cracking, the finished creation is covered with polyethylene. To give the product a beautiful and correct form, the base is placed on a hill of sand or deepened into it (depending on the idea), but not on flat surface.

After complete hardening, the figure must be coated with a primer, and only after that can paint or varnish be applied. If the craft has roughness and other irregularities, it is finalized before priming sandpaper and a file.

In addition to cement mortar, concrete is sometimes used, which is distinguished by the presence of large fractions (pebbles or gravel) and increased strength. Crafts made of concrete for summer cottages can be represented by large monolithic boulders, and it is also convenient to use this material to create the basis for various compositions (a fountain platform, a pedestal for sculpture, a terrace for flower pots And so on).

Another material similar in its application is gypsum. It is not as strong as cement, but more plastic and decorative. With it, you can create hollow shapes. For garden creativity, molding (sculptural), acrylic and architectural views. When working with this material, you need to take into account its rapid solidification. It is often recommended to add it to cement mortar when creating sculptures.

If you have no experience using cement for decorative purposes, it is better to start with something simple that does not require modeling skills and getting the right consistency. The first exhibits in your garden can be cute mushrooms, colorful balls or original pots for flowers.

To make a mushroom, you will need an old rubber ball (the size of the cap will depend on its size), a plastic bottle (it will become the basis for the leg, its size should be proportional to the cap), a metal bar for attaching the cap to the leg. The ball is cut into two halves, one of which is placed in a bucket of sand and pressed evenly. Next, cement mortar is poured into the resulting form and leveled.

At plastic bottle cut off the bottom and neck and insert into the filled form in the center, immersing it by 1 - 2 cm. Then, using a long iron bar, connect the future leg and cap of the mushroom and fill the cavity inside the bottle with a solution. For several days, the product should harden, after which you need to remove a piece of the ball and a plastic cylinder.

After a few more days, the product can be covered with paint and decorated with various elements. Mushrooms of different sizes look spectacular on the site in the form of a small clearing. It is also worth noting that your imagination may tell you to use other containers (bowls, jars) and methods for making garden mushrooms.

It is enough just to make an openwork ball that seems so light and airy. For the base, use a balloon (the size of future figures depends on how much you inflate the balloon). Next, any rope is placed in the finished solution and then the ball is wrapped around it.

Do not wrap the base too tightly, you need to leave enough holes for further extraction of pieces of the burst ball. When the product is dry, you can proceed to decorative coating.

If you cover the balloons with cement mortar with the addition of a small amount of gypsum for faster hardening, you can get original garden lanterns or flower pots.

Using this technique, you can also make vases for dried flowers. In this case decorative coloring exposed not only external, but also inner side.

If you pour the solution into a small hole in rubber balls, you can get monolithic balls different sizes. Painted in different bright colors and randomly scattered around the garden, they will become concise and stylish decoration.

Using plastic containers, you can make a planter for cacti crassula and Crassula Ovata. container wrap plastic bag, and a bag of clay or sand is placed inside to keep the container in shape. Then it is covered with cement mortar. After complete drying, all auxiliary materials are removed; drainage holes, the product is primed and covered with paint.

It is very easy to make a flowerpot using a plastic bucket or vase and another suitable container.

One container is inserted into another, a solution is poured into the space between them. The result is a solid product that can be additionally decorated by showing your imagination to the fullest.

Flowers planted in a flowerpot made of crossed palms of the hands look attractive. To create such a masterpiece, ordinary rubber gloves are used, which are evenly filled with a solution. For rigidity, a thick wire rod must be inserted into each finger. In order for the product to turn out to be of high quality, the formation of air bubbles should not be allowed.

When the gloves are filled, they are shaped into the desired shape and fixed. After a few days, the rubber is cut and removed. If you want to connect two palms, then the same solution is used for this. At the final stage, the surface is polished with sandpaper, primed and painted.

Complex figures with a frame

More fun to decorate your Vacation home sculptures of animals and mythical characters. Such creations involve prefabrication strong frame and layer-by-layer application of cement mortar.

Interesting flower vases can be made using buckets from building mixtures. At the first stage, a container of suitable size is wrapped plaster mesh and covered with a thick layer of cement. At the second stage, until complete solidification, a decorative adjustment is carried out, making an imitation of an old stump with natural wrinkles on the bark.

close artificial reservoirs a monolithic figure of a hippo will look appropriate. The place for it must be determined immediately and carefully aligned, since in the future the figure will be stationary.

As a frame, two elongated plastic basins are suitable, which must be fastened with wire. another option is also possible: a thick solution of cement is covered on top of a pile broken brick or gravel.

The figure itself does not contain complex elements and is easy to perform. After hardening, the product is treated with fixing impregnation and dry pigment for concrete, rubbing the powder with a hard sponge.

More complex sculptures are made in several stages: 1) making a frame from wire and foam or containers; 2) covering the workpiece with a plaster mesh; 3) applying the mixture in several layers; 4) formation small parts(facial features, special texture, folds of clothing, etc.); 5) priming and painting finished work.

An elegant decoration of the garden will be flower vases in the form of swans. The frame of the body is an old plastic basin, the neck is a twisted wire. The head, wings and plumage imitation will have to be made from cement mixture showing the skills of a sculptor.

Monolithic figures have a significant weight, so as an alternative, there is a way to create lightweight large-sized objects. You can decorate your garden with boulders of different sizes.

For their manufacture, any unnecessary and light material (trimmings polyurethane foam, plastic bottles, styrofoam).

The resulting base is wrapped in a plaster mesh and covered with a thick cement mortar. The more bumps and protrusions there are, the more natural the “stone” will look.

Small garden figurines are made from a mixture of cement with the addition of gypsum or Portland cement.

Here you can use the manufacturing methods described above, as well as any basics: old toys, clothing, household utensils.

Step-by-step instructions for making: 3 master classes

In order to analyze in more detail the nuances of the creativity presented in the article, consider best master classes with a step-by-step explanation of the work being done.

1. Spectacular flowerpots made of cement and fabric

To make garden pots out of cement and cloth, either pure cement or Portland cement is used. In this case, the mixture with water should turn out to be quite liquid. You will also need a bucket or other container for the frame, a piece of polyethylene and a piece of fabric.

The material must be sufficiently dense and absorb liquids well, i.e. synthetics will not work here. It is better to use cotton fabric.

Cut off a piece right size. If you need smooth edges, then round off;
Abundantly wet the matter in the solution;
We fix polyethylene on the prepared bucket;
Lay out and smooth the fabric soaked in the solution on top;
After 2 days, the cement will set and the bucket can be removed;
The product is slightly moistened with water and left to dry completely for another 5 days.

Even large-sized plants can be planted in a finished flowerpot.

Experiment with the shape and color of flowerpots and create your own unique compositions.

2. Funny cat for the garden

To begin with, we prepare a frame from a cut plastic bottle and wooden slats that are held together with wire.

The solution is prepared from cement and sand in a ratio of 1: 1, additionally (directly into the hand) gypsum is added during work. Gradually applying the solution, create all the details of the sculpture.

The finished figure is polished with a wet hand and left to dry for 4 days. Finishing touch- painting with water-based emulsion or enamel.

3. Large drinker leaf for birds and pets

no less successful and universal decoration garden will be a sheet of cement. Laid on a mound of sand polyethylene film, and then - a large sheet (the mound will allow you to get a figure with a recess, and not a flat one). If there are small holes in the sheet, then they should be closed with small leaves so that the cement mortar does not leak.

For several days, the workpiece is covered with a film until it dries. Then the sheet is removed, primed and painted.

If desired, a fabulous fountain can be made from several similar blanks.

Having a summer cottage, you always want to equip it, and even somehow in a special way. However, garden decorative elements are not cheap, and they do not differ in durability.

People with a developed imagination can make original garden crafts from cement, which is not only highly resistant to various kinds of influences (frost, hail, sun, water), but also accessible (you can buy it at any hardware store for an affordable price).

For decoration and design additions, you can use flower pots, planters, figurines of fairy-tale characters or objects of the plant world, made by hand from cement. This material is not whimsical, and most have little or no experience with it. Nevertheless, there are several important rules that must be observed in order for cement mortar crafts to be of high quality and durable.

The technology for preparing the mixture itself is as follows. The main components are being prepared: cement, building sand, water and tile adhesive (for better plasticity and reducing the risk of microcracks). For 1 part of cement, 2 parts of sand are taken (for greater strength, you can take 1 part) and 1 part of glue. Lastly, water is added in small portions until the consistency of thick sour cream. It is convenient to work with such a mixture: it does not drain and at the same time it is quite plastic.

All cement products require prolonged drying. Freezing can last up to 7 days. To prevent the surface from cracking, the finished creation is covered with polyethylene. To give the product a beautiful and regular shape, the base is placed on a hill of sand or deepened into it (depending on the idea), but not on a flat surface.

After complete hardening, the figure must be coated with a primer, and only after that can paint or varnish be applied. If the craft has roughness and other irregularities, it is refined with sandpaper and a file before priming.

In addition to cement mortar, concrete is sometimes used, which is distinguished by the presence of large fractions (pebbles or gravel) and increased strength. Concrete crafts for summer cottages can be represented by large monolithic boulders, and it is also convenient to use this material to create the basis for various compositions (a fountain platform, a pedestal for sculpture, a terrace for flower pots, etc.).

Another material similar in its application is gypsum. It is not as strong as cement, but more plastic and decorative. With it, you can create hollow shapes. For garden creativity, molding (sculptural), acrylic and architectural types are used. When working with this material, you need to take into account its rapid solidification. Very often it is recommended to add it to the cement mortar when creating sculptures.

The bottom and neck of a plastic bottle are cut off and inserted into the filled form in the center, immersing it by 1–2 cm. Then, using a long iron bar, the future stem and cap of the mushroom are connected and the cavity inside the bottle is filled with a solution. For several days, the product should harden, after which you need to remove a piece of the ball and a plastic cylinder.

Do not wrap the base too tightly, you need to leave enough holes for further extraction of pieces of the burst ball. When the product dries, you can proceed to the decorative coating.

If you cover the balloons with cement mortar with the addition of a small amount of gypsum for faster hardening, you can get original garden lanterns or flower pots.

Using this technique, you can also make vases for dried flowers. In this case, not only the outer, but also the inner side is subjected to decorative staining.

If you pour the solution into a small hole in rubber balls, you can get monolithic balls of different sizes. Painted in different bright colors and randomly scattered around the garden, they will become a concise and stylish decoration.

Using plastic containers, you can make pots for Crassula and Crassula Ovata cacti. The container is wrapped in a plastic bag, and a bag of clay or sand is placed inside to keep the container in shape. Then it is covered with cement mortar. After complete drying, all auxiliary materials are removed, drainage holes are made in the bottom with a drill, the product is primed and coated with paint.

It is very easy to make a flowerpot using a plastic bucket or vase and another suitable container.

One container is inserted into another, a solution is poured into the space between them. The result is a solid product that can be additionally decorated by showing your imagination to the fullest.

Complex figures with a frame

It is more entertaining to decorate your country house with sculptures of animals and mythical characters. Such creations involve the preliminary manufacture of a strong frame and the layer-by-layer application of cement mortar.

Interesting flowerpots can be made using buckets of building mixtures. At the first stage, a container of suitable size is wrapped with a plaster mesh and covered with a thick layer of cement. At the second stage, until complete solidification, a decorative adjustment is carried out, making an imitation of an old stump with natural wrinkles on the bark.

Near artificial reservoirs, a monolithic figure of a hippopotamus would be appropriate. The place for it must be determined immediately and carefully aligned, since in the future the figure will be stationary.

As a frame, two elongated plastic basins are suitable, which must be fastened with wire. another option is also possible: a thick cement mortar is covered over a pile of broken bricks or gravel.

More complex sculptures are made in several stages: 1) making a frame from wire and foam or containers; 2) covering the workpiece with a plaster mesh; 3) applying the mixture in several layers; 4) the formation of small details (facial features, special texture, folds of clothing, etc.); 5) priming and painting the finished work.

Flower vases in the form of swans will become an elegant decoration of the garden. The frame of the body is an old plastic basin, the neck is a twisted wire. The head, wings and imitation plumage will have to be made from a cement mixture, showing the skills of a sculptor.

Monolithic figures have a significant weight, so as an alternative, there is a way to create lightweight large-sized objects. You can decorate your garden with boulders of different sizes.

For their manufacture, any unnecessary and light material (cutting foam, plastic bottles, polystyrene) is tied into a tight lump with a wire.

The resulting base is wrapped in a plaster mesh and covered with a thick cement mortar. The more bumps and protrusions there are, the more natural the “stone” will look.

Small garden figurines are made from a mixture of cement with the addition of gypsum or Portland cement.

Here you can use the manufacturing methods described above, as well as any basics: old toys, clothing, household utensils.

Step-by-step instructions for making: 3 master classes

In order to analyze in more detail the nuances of the creativity presented in the article, we will consider the best master classes with a step-by-step explanation of the work being done.

1. Spectacular flowerpots made of cement and fabric

The material must be sufficiently dense and absorb liquids well, i.e. synthetics will not work here. It is better to use cotton fabric.

Cut off a piece of the desired size. If you need smooth edges, then round off;
Abundantly wet the matter in the solution;
We fix polyethylene on the prepared bucket;
Lay out and smooth the fabric soaked in the solution on top;
After 2 days, the cement will set and the bucket can be removed;
The product is slightly moistened with water and left to dry completely for another 5 days.

Even large-sized plants can be planted in a finished flowerpot.

Experiment with the shape and color of flowerpots and create your own unique compositions.

2. Funny cat for the garden

To begin with, we prepare a frame from a cut plastic bottle and wooden slats, which are fastened with wire.

The finished figure is polished with a wet hand and left to dry for 4 days. The final touch is painting with water-based emulsion or enamel.

3. Large drinker leaf for birds and pets

An equally successful and versatile garden decoration will be a sheet of cement. A plastic film is laid on a mound of sand, and then a large sheet (the mound will allow you to get a figure with a recess, not a flat one). If there are small holes in the sheet, then they should be closed with small leaves so that the cement mortar does not leak.

For several days, the workpiece is covered with a film until it dries. Then the sheet is removed, primed and painted.

If desired, a fabulous fountain can be made from several similar blanks.

A flower pot, of course, is a purely practical thing. But what is stopping you from working on its “appearance” and turning it into a bright accessory?

concrete flower pot

From a simple hemp, you can make a planter for ampels.

Crochet a chain of air loops and connect into a ring (in diameter it should be slightly smaller than the bottom of the pot). Then knit row after row of single crochet or double crochet, while depending on the shape of the pot, add or subtract stitches. For hanging, tie a long strip and attach to your new potty outfit with wire, key rings, or a leather thong.

"Branch" flower pot decor

Behind a small fence made of thin branches, a pot lurked. The branches should be straight, ideally covered with moss and lichen. Cut many sticks of the same length, partially wrap some of them with thin woolen threads. Glue the ends of the threads. At the bottom and at the top, wind the branches to each other with wire to make a fence. Put it on the pot and connect the two sides with wire.

Mosaic flower pot decoration

Ordinary clay pots will become real masterpieces if they are decorated with a mosaic of pieces. ceramic tiles. Dot the container with frost-resistant tile adhesive and lay out the shards in random order. Then cover the gaps between them with grout and immediately wipe the mosaic with a damp sponge. The next day, when the pot is dry, polish the product.

Unusual pot cover

The easiest way to decorate a pot is to cover it acrylic varnish. It must be applied to a clean, dry surface that has already been primed. Lacquer coating will look voluminous if you add sand, which is used to keep birds at home, such as parrots. Sprinkle the sand over the wet, thick layer of varnish.

DIY flower pot garland

Each summer resident in a barn or some other utility room many plastic pots are stored, which are often used for transplanting plants or seedlings.

As a rule, these pots are stored in the most incredible way, and when they are needed, you will never find them.

Try to remember how many similar pots we have, what size they are and whether to buy new ones ...

Gardener-designer and TV presenter Olga Platonova suggests making an original garland out of plastic pots.

You will need

plastic pots
aluminum fork
long lace
two stop clamps
electric drill
screwdriver or hammer and nails

We make a garland from flower pots

Terrarium Hydroponic Plant Vases Vintage Flower Pot Clear Vase ...