Tinting varnish for wood. Proper use of wood oil for exterior and interior work How to tint linseed oil

So as not to lose quality characteristics wood, it is recommended to treat it only with natural compounds. Various natural oils have been used for treating wood since the 12th century. In terms of its characteristics, linseed oil takes first place, as it not only protects wood, but also gives it a soft, velvety shade. How to properly use linseed oil for wood processing, the main stages and subtleties of the work in one short article.

When choosing how to treat a wooden floor or staircase, environmental friendliness and protective properties impregnation. Impregnation of wood with natural linseed oil has a number of advantages:

• The old product acquires an aesthetic appearance, as small cracks, abrasions and unevenness are masked.
• Absorbing into the porous surface, the composition gives it water-repellent properties.
• After drying, dust and dirt adhere less to the surface.
• Emphasizes the natural texture of wood.
• The oil has antiseptic properties and protects the surface from fungi, mold and blue stains.
• It is deeply absorbed into the wood and will last at least 50 years.
• Protects wood from cracking and drying out.
• Wood never stops “breathing”.
• Hypoallergenic and suitable as finishing in children's rooms and kitchens.

Linen is used to coat any wood products: in the processing of houses, when finishing furniture and decorative elements made of oak, teak, pine, spruce, fir. Due to its composition, the oil is easily combined with various tinting emulsions. Apply independently as finishing and protection or under further varnish coating.

The only downside is the price, which depends on the manufacturer and the volume of impregnation purchased. The table below presents the most popular manufacturers linseed oil for finishing work:

Which wood oil to choose depends on your financial capabilities. An unrefined product from any manufacturer is suitable for wood processing. Imported flax compositions are more expensive, but have additives in the form of beeswax or artificial polymers. They reduce drying time and simplify work. Each manufacturer has its own consumption and depends on the thickness of the product.

To tint the surface, impregnation with colors is purchased. This can be found in the catalogs of the manufacturer Tikkuril, price from 750 rubles/liter. Translucent tinting with various natural shades. Using colored oil, you can tint an inexpensive type of wood, such as pine, or give the appearance of oak or mahogany. After processing, distinguish inexpensive material from a similar premium class at first glance it will be difficult.

Application technology

Each manufacturer's use is indicated on the label. But there are standard methods:

• Immersion - when wooden element immersed in a hot composition and left to soak for several days. Then it is taken out and dried on a warm surface.
• Vacuum impregnation - the product is placed in special device, where under the influence of a vacuum the oil penetrates deep into the wood.
• Two-layer application - performed using a brush or a piece of foam rubber when finishing the premises.

Let's take a closer look at the two-layer application, which is suitable for processing wooden floors, stairs and walls.

Two-layer application

To complete the finishing you will need tools and materials:

1. Oil.
2. Wax.
3. Wide tassel - flute.
4. Sanding paper of the finest fraction.
5. Cotton rags.
6. A piece of clean suede.

The product is first cleaned of the old coating, the surface is polished using sandpaper. Use a soft brush to sweep away dust. Prepared wood absorbs oil better, and the protective properties of the coating will be higher.

Before work, the oil is brought to a boil twice. Thermal preparation will reduce the drying time of the impregnation. You need to cook the flaxseed product in a water bath, in small portions. As soon as the oil boils for the first time, remove it from the heat and allow to cool. Then the procedure is repeated. Before application, the hot product is stirred so that the color is more uniform. Modern compositions with wax do not need to be preheated, but they will take longer to dry. Use hot impregnation with caution and wear protective gloves.

1. A brush or sponge is soaked in linseed oil, which is applied liberally to the wood using a blotting motion. Movements are performed along the fibers.
2. Within two hours, the surface of the wood is impregnated.
3. A second layer of hot impregnation is applied. The surfaces are allowed to dry for 2-3 hours.
4. Take a soft rag and use it to remove excess impregnation from the tree.
5. The surface is polished with wax or varnished.

Beeswax is heated in a water bath and rubbed hot into the wood until the surface acquires an even shine. But it is not necessary to cover the impregnation with wax; you can use the old method of polishing - using a thick suede cloth. Rub the surface with suede until it shines, using circular movements. But adding shine to wood is a long and painstaking process. It may take several weeks to treat a large area.

When using linseed oil to protect wood in your home, the application technology is followed. You will have to work with a heated product, so take care to protect your hands and eyes. By impregnating the wood, the oil will protect it from moisture, sun, fungi and mold. Small cracks will disappear on the surface, and the pattern will become clearer. To decorate inexpensive wood like oak or mahogany, impregnations with tinting effects are used, which can be purchased at any specialized store. For simple processing, the most inexpensive unrefined oil is suitable. It is advisable to wipe the top surface with wax or sand it until shiny with a suede cloth.

Description: Provides perfectly even surface painting even with uneven application. Semi-matte gloss. It is used as an independent colored coating for wood, or for tinting wood before applying “Linseed oil boiled with wax, No. 2”, which imparts high water repellency and a silky shine. Can be tinted with any universal pastes. After drying, the coating is transparent, emphasizing the wood grain. Does not crack or peel when wood changes in size. No solvents.

Purpose: For interior works and external works (walls, ceilings, structures, windows, furniture, floors, etc.). For unpainted wood and cork surfaces. For outdoor use, any topcoat overlay is recommended.

Compound: Vacuum-boiled linseed oil, ground with aqueous silver salts, essential oil pine trees

Application: Clean the surface from dirt and dust and dry. Mix the oil thoroughly in the entire container, pour into an empty container and color. Apply the 1st layer with a roller or brush, without excess, at T>+12..15ºС. For a more saturated tone, after 1 day you can apply the 2nd layer (further, if necessary, the 3rd). For a more contrasting tone, as well as on hard rocks and surfaces with wear (floors, bath shelves, furniture, etc.), after applying each layer, wipe off the excess with a cotton cloth. Before applying “Linseed oil boiled with wax, No. 2”, dry the surface for at least 8 hours.

Tinting: Mix thoroughly with any universal tinting paste in an amount of up to 1-3% by volume and apply according to the instructions.

Cleaning the instrument: Wash the instrument and contaminated skin areas with soap and water.

Storage: In the range from +5 to +30ºС, shelf life 18 months. Do not freeze.

Precautionary measures: Do not take orally. Keep away from children. Work away from fire, switched on electrical appliances and hot objects. Store oiled materials in a damp state or in a fireproof sealed container - self-ignition is possible if they are stored in large volumes. When working, ensure good ventilation. Do not use if you are allergic to natural oils and bee products.

Colored tinting oil for wood

Colored tinting oil for wood appeared relatively recently. In fact, why is it necessary? color tinting oil, if there stains? The fact is that stains- These are chemical dyes that are soluble in water or alcohol. For all its attractiveness, stains most often have a serious drawback - low light fastness. This means that on the street or in sunny interior stains will “burn out”, i.e. discoloration on the tree.

The solution is in application. colored oils. The fact is that they usually use pigments - solid insoluble dyes, very finely ground into the product. Pigments, especially mineral ones, as a rule, have high light fastness and do not “fading” in the sun. Therefore, high-quality colored oil for wood can be used for both interior and exterior work.

But also with tinting oils and waxes for wood There are problems: they can only be tinted with special pastes, which, as a rule, are offered by manufacturers of wood products. These are expensive pastes - their price is usually 7-8 times higher than conventional universal tinting pastes. Regular inexpensive all-purpose pastes from the store simply do not mix with oils and waxes for wood.
There is an option to use imported tinting systems, for example, Tikkurila, Akzo Nobel, etc. But this, firstly, is not always available for non-branded paints, and secondly, it is even more expensive than “branded” colors for oils and waxes. If we add to this the limited range of colors of “branded” pastes, it turns out that tinting oils and waxes for wood– expensive, and the range of colors is not wide.
True, you can find ready-made colored tinting oils, but the same problems exist here - an unreasonably high price, a small variety of colors, in addition, you cannot choose the tone saturation, since the color is already ready.

But there is a simple solution - “Finno-Ugric Secrets” are tinted with ANY universal pastes from any store - choose the desired color, its saturation (paste concentration), and do not pay extra - after all, the pastes used are the most common ones. You can also use “branded” pastes for our products, and expensive tinting systems - all this will also work. We simply offer the simplest and cheap way get color tinting oil.

Of all the products in the Finno-Ugric Secrets series, they are perfectly tinted, Wood oil for tinting No. 3 and . We do not recommend tinting only because... it contains a lot of wax and is therefore thick, which will impair the uniformity of coloring when applied with a brush or roller. To tint wood under it, we recommend the first layer Tinting oil No. 3.

Let us especially focus on Wood oil for tinting No. 3. This is not a ready-made color tinting product, but a tinted base. This is the simplest and profitable way tinting wood indoors or outdoors (on the street, additionally use a topcoat for exterior use). In the interior it is used independently, or as a color impregnation under.
Independent use wood oils for tinting, without others finishing coatings, gives a matte wood surface.
It's suitable for anyone further coverage tree - be it oil or wax any manufacturer, or traditional varnishes and impregnations. Just take ours tinting oil No. 3, choose any universal tinting paste, tint it and get the desired color and saturation. This is a very simple and inexpensive solution.

Is our wood oil for tinting does not contain wax and has an optimal viscosity - not too thick (so that there are no traces from a brush or roller), and not too liquid (so that there are no drips and splashes, like from stains). You can apply our color tinting oil even across the fibers, the color will still be uniform. Just be sure to thoroughly prepare the surface of the wood with a suitable abrasive to achieve the most uniform surface possible.

In our company wood oil for tinting, like great alternative colored tinting oils, You can only wholesale. For this with us. In addition, now high-quality colored tinting oils Can buy retail for a very favorable price ours.

Tinting parquet flooring is not such a simple process as it may seem to many. Many nuances and pitfalls await an inexperienced person. How to tint, what technology and technique to use, what the output will be, and other answers, see the parquet tinting page.

In this article we will dwell in detail on the possibility of using tinted varnish, which is widely offered in all construction markets and other sites. Tinted varnish for parquet is sold everywhere, but those who offer it have hardly ever tried to use it themselves! Tinting varnish It’s hard to call it an excellent product for tinting parquet or floorboards.

Let's start with the fact that even on colorless varnish, sagging and overlaps are clearly visible after drying, although small differences in the thickness of the application are not noticeable. This is due to the fact that the eye only perceives changes in the degree of gloss, but the color scheme does not change when the thickness of the varnish film changes. When using tinted varnish, everything is different; the thicker the layer, the darker it is. Even small differences in thickness will clearly stand out. Apply varnish to large area perfectly uniform, without overlapping layers is impossible.

Let's explain it in our fingers. It’s easy to cover a small lamella with one stroke of the brush and place it on a sample, but it’s impossible to roll it out with a roller, much less apply it with a brush, without overlaying part of the varnish from one pass onto another. The tinted varnish will not spread, and the transitions and joints will be distinguished by dark spots and stains.

See an example of applying Tikkuril tinted varnish with a brush and the consequences of this on the parquet tinting error page.

Therefore, when asking the question: Why do stains remain on wood after white or colored varnish?, you are most likely confusing the stains with ordinary stains.

Tinted varnish is never used by real craftsmen!

But its use is still possible. Firstly, using tinted varnish significantly reduces the cost of the process. If you know how to do something, you work without haste, and a few dark spots will not be a tragedy for you, then you can easily tint the floor in your dacha with this product. Let's give some advice. Use only a roller, and good quality. Apply varnish only along the boards, exactly the width of the narrow section. Try to roll from wall to wall in one motion. Do not try to correct anything in the already varnished part. With the next pass, under no circumstances climb onto the already varnished part. Carefully consider the exit from the room so that by moving the roller along the finishing row, you can easily leave the room. Well, something like this.

Yes, still! If you are satisfied with the result of one of the layers, use the colorless version for the next coatings!

Tinted varnish is good for use on completely “killed” floors in apartments and industrial premises. It covers stains, rot and other damage well. True, in this case the structure is completely lost, and the floor takes on the appearance of being painted. The so-called “deaf” tinting of parquet. When applying several layers of tinted varnish, a completely uniform dark film is formed. At the same time, the reflective ability changes and the glass effect disappears when all layers are visible throughout the entire depth. In this case, color differences in thickness are leveled out, and the floor looks more or less uniform.

But such a coating is no longer tinting in its true sense, and is rather called painting.

After reading this article, you will be able to understand why it is not advisable to use tinted varnish to tint parquet or boards.

Ask a question to a repair specialist. Page number 1

Before submitting your question, please read service rules! (see below)

You can ask a Question to an expert on the subject of our portal, we will try to answer you on the pages of our website.

Rules:

1. If a question does not correspond to the topic of the section, it may remain unanswered or simply be deleted.
2. Any accusations against experts or site administrators are strictly prohibited.
3. Adding spam is strictly prohibited! The IP addresses of all visitors who ask questions are recorded and, if necessary, can be reported for legal proceedings.
4. The administration and experts do not guarantee that your question will receive an answer. But if all the previous points of the rules in the question are met, then, as a rule, such a question receives an answer.

The questions are answered:

Question statistics

Hello! Can you please tell me what kind of paint can be used to paint the floor so that it dries quickly and does not have a strong smell?

Good afternoon Please tell me which brush is better to paint a wooden surface with impregnation? Thank you in advance)

Good afternoon. I ask you to help me choose the color of the entrance street door. The outside of the door has been cleaned old paint to metal inner side wooden. Question: What type of paint or enamel should I choose for painting? front door on both sides? Sincerely, Alexander.

what kind of varnish can be used to coat komar paper colored photo wallpapers or any water-based acrylic varnish

Please tell me what the Tikkurila paint consumption will be for 270 m2

Good afternoon. Tell me what kind of “stain” or varnish to coat a plywood door for furniture with. I'm very beautiful wall, most likely made of wood or plywood, the door is broken, they suggest making a new one from thick plywood. With all the patterns, cutouts and everything. The master says that if you coat this door correctly, then this door will be varnished, or “stained”, I don’t remember exactly, but the door will not be distinguishable from the old one. But I don’t really trust him, although the master is not bad with experience. I’m just surprised that if everything were so simple, probably all people would not buy furniture, but would make it from plywood. Thank you in advance. Boris.

Hello! What parquet varnishes can be used over TEX Lux varnish?

Good afternoon...can I ask a question about the bathroom?

Ask your question

Dear visitor! You are in the archive of the old forum on mastergrad.com

Kollerovka Tikkurila Yacht. Is it possible to?

Color for wood: preparation of tinted varnish, oil and impregnation

The beauty of wood is that it looks great on its own, you just need to show its texture. Color can be used to obtain the desired shade.

Sometimes, for example, light wood needs to be slightly darkened, and it is in such a situation that color comes in handy.

Wood treated with tinted oil

Understanding the terms

Tinting wood varnish (as well as stain, impregnation and other means) means gradually adding dye until it acquires the desired shade. That is, color is a dye that is gradually added to the solution.

Note!
For each type of wood treatment product, you should use a different type of color.
Otherwise, it may simply not dissolve when stirred, resulting in a suspension that cannot be used for processing.

As for which color to choose, it is recommended to adhere to the color chart when purchasing it. It is also useful to know that colors that use organic pigments are not particularly resistant to light. Therefore, for outdoor work it is better to use a color scheme that uses inorganic pigments.

In the photo there is a color map for selection the desired shade

There are several hundred shades of color, just the most common types of coloring wooden stairs include about 50-100 shades. But if suddenly the color palette is not enough, you can always mix 2 different colors and get your shade.

In this case, it is recommended to first experiment with a small amount of color and test the resulting tinted varnish or stain on an unnecessary piece of wood. A sign that everything went well can be considered smooth surface after drying, no streaks and uniform coloring.

First you need to test the tinted varnish or stain on a piece of wood.

How to tint correctly

In a nutshell, the instructions for tinting are that the dye is slowly added to the stain, paint, etc., after which it is simply mixed thoroughly.

Tinting parquet with tinted varnish

The dye is added gradually and when the liquid reaches the desired shade, you can proceed to processing the wood. However, there are a number of nuances, depending on what needs to be prepared - varnish, stain or paint for wood.

Preparation of tinted varnish

The main purpose of the treatment is to create a durable film on the surface of the wood; after the varnish has dried, it will protect the wood from moisture penetration into it, and the texture will also appear. Tinted varnish for wood differs from regular topics that after processing not only does the wood texture appear, but it is also painted in the appropriate shade.

Sometimes even famous manufacturers can make mistakes in the color chart, so it makes sense to take care of preparing the varnish of the desired shade with your own hands. Dyes are usually sold in the same stores as the wood treatment products themselves. You can even try to negotiate with the operator of the coloring machine and the color can be cast into your container. It's simple perfect option, but it all depends on the mood of the employees.

The required color can be obtained from the tinting machine operator

You can try to do tinting using improvised means. For example, there are references to the successful experience of adding to acrylic varnish water stain(a kind of color for wood varnish). The resulting solution is quite pale (even with a high concentration of stain), so it is suitable in cases where strong darkening is not needed.

As for the process of processing a wooden product, it is recommended to adhere to the following sequence:

• the surface is carefully polished. immediately before applying a layer of varnish, you need to wipe the surface to remove dust;

The surface must be perfectly smooth

• then the first layer of tinted varnish is applied;

Note!
The entire product is varnished at once; in no case is it recommended to break the surface into sections.
If you prepare the next batch of varnish later, it is unlikely that you will be able to get the same shade, but the difference will be noticeable.

• Wood tinting is done in at least 2 layers. But if the surface is quite porous, and the varnish itself is not very saturated in color, then the number of layers can be increased to 3-4;
• It is recommended to make the last layer colorless.

Tinted oil and impregnations

• regular oil paints. They can be mixed at room temperature;
• You can also use gouache. but so that the water does not interfere with the process, the mixture will have to be heated, the water will evaporate;

You can use gouache to tint oil.

• in the past, people also used dyes such as ordinary ash. For example, tinting wood oil with ash will allow you to achieve a dark gray or even black color, it all depends on the concentration of the dye. Soot, colored clay and other natural materials can also be used;

A dark color can be obtained by mixing soot or ash with oil.

• If you buy a dry color and mix it with oil, you will get an analogue of purchased oil paint. Since their prices are comparable, there is no point in messing around with mixing oil and dye; it’s easier to just buy paint.

It should be remembered that when working with oil, too high a concentration of dye gives a more saturated color, but the properties of the oil are lost. That is, it no longer protects the wood from moisture so well and over time the coating will need to be renewed. So the color for wood oil should be added with an eye to the balance between the properties of the oil and the color saturation.

In the case of impregnations, the color after treatment is usually secondary, but even at this stage it is possible to ensure that the wood acquires a noble appearance. If a part of the structure is being processed that will not be visible, then iron oxide can be added to the solution, just so that it can be seen which part is processed and which is not.

Iron oxide will give a bright red color to the wood.

Tinting of wood impregnation can be done to imitate red or any other noble wood. Pastes YF, GO, KF and coalescent are used as dyes. By weight, the concentration of these substances in total does not reach 4% of the weight of the impregnation. But changing the concentration even by a fraction of a percent gives a spectrum of colors from camouflage green to dark chocolate, so it’s just limitless for experimentation.

Summarizing

Tinting varnishes, oils and wood impregnations is a creative process, and therefore very exciting. By adjusting the concentration of dye in the wood treatment liquid or oil, you can achieve almost any shade. As a result, even simple pine looks exquisite after processing.

This article shows an example of use acrylic varnish, tinted with ordinary water-based stain.

http://rubankom.com

Wood paint varnishes - tips for choosing

To protect wood and give it beautiful color and shine during construction or repair, various paints and varnishes are used.

Tikkurila water-based varnish: characteristics and subtleties of use

Wood paint varnishes are presented in such an assortment that your eyes widen.

Things to consider

When choosing a suitable paint and varnish, consider several factors on which the final choice depends. What type of wood are you going to cover? Under what conditions will the product or surface be used? Is it possible to treat the surface and pre-prepare it before work? Also pay attention to whether the wood can be re-treated, and whether the chosen paint is compatible with those paints and varnishes that have already been applied.

The choice of wood preservatives is so large that without preliminary preparation you can't get by. There are many primers, impregnations and various types varnishes All coatings differ in appearance, which we can see upon completion of the work. They also differ in the method of application, since all coatings require different conditions application and drying.

Types of paints and varnishes for wood

Depending on the appearance The following varnishes and paints for wood are distinguished:

• dispersion paints;
• transparent coatings (stains, impregnations, varnishes);
• enamel is opaque.

The clear coat can consist of pigments, the amount of which varies, which is why they can preserve the natural grain of the wood. This protection reacts well to moisture, steam, and sunlight, so it ages and loses its properties very slowly. Even if you want to repaint the surface, you do not need to remove old layer. The clear coating can last for several years.

Acrylic dispersion paints are becoming more and more popular. Water is used as a solvent, and the binding component in this paintwork material is acrylate components. After the coating is applied to the wood, the water dries completely, as a result we can see a durable film on the surface. It protects the material from moisture, external influences, and fire. This paint provides high level resistance to any temperature, and it is suitable for finishing outside or inside. If you don't like the original color, it can be tinted and mixed with other shades, don't be afraid to experiment.B last years Opaque enamel paints are no longer used as much as they once were. This is explained by toxicity and low fire resistance. The Docker Chemical GmbH Rus company offers professional paint varnish removers.

Wood color when surface treated with oil and wax based impregnations
Maslovosk ANTA series Standard, Maslovosk Premium and Maslovosk Leader Gold

Maslyano Wax impregnation for wood Anta Oil Wax does not contain any modifications of any pigments or tinting pastes and, therefore, Anta Oil Wax, when initially applied to the surface of wood of any species, practically does not paint the treated surface in any color.

← immediately for tinting Anta oil wax.
Select and buy ready-made pigment or ColorLak pigment paste.

After treating the surface with an impregnation based on oil and wax, Anta Oil Wax from the Eco Natur line, the color and structure of the wood fibers of the treated wood become slightly more contrasting and rich due to the filling of the wood capillaries with natural linseed oil and wood resins, which have a natural, barely noticeable, light sunny amber color shade. That is, processed, for example, Oil wax Standard surface, maintaining the original shade and structure of the rock you have chosen wooden surface, as if saturates, deepens and slightly enhances the natural original color of the wood that it had before processing.

A deeper natural color of wood and the manifestation of a more saturated amber spectrum on the treated wooden surface can be obtained by introducing additional amounts of various resins into the Oil Wax, which saturate with a higher concentration wood fibers and capillaries of wood during its processing. Almost any tree resin has its own characteristic color of varying shades and saturation. The visual effect of enhancing the color of wood is obtained by treating wood with the Maslovosko series PREMIUM And Leader GOLD, because these modifications of molovosk contain an increased content of various additional resins, which are responsible for increasing the wear resistance to mechanical abrasion of the surface and significantly improve the operation of the natural UV filters contained in these oil waxes, in contrast to the oil waxes of the Standard series.

Pigments significantly INCREASE the protection of treated wood.

The degree of protection of Anta Maslovosk impregnations is rated quite highly. The service life of the most commonly consumed oil wax - Maslovsk Standard, even in a colorless version, without introducing any pigments into it, can be up to 10 years! That is why Most of our consumers of natural impregnations, produced without the use of any chemical or artificial components, choose the natural color of the Anta Oil Wax impregnation and leave the wood the same color as it was created by nature itself.
It is known that the service life and quality protection of the surface of a wooden house made of logs and timber, sheathed with natural wood siding, blockhouse, imitation timber or simply planed board, especially on external walls houses and baths, is largely determined and DEPENDS on the SPECIES of wood, its density, climatic conditions where the tree grew, where the forest grew or where it was harvested, when the wood was cut down to make lumber, etc.
Therefore, at first glance, wood that is almost identical in quality and color, even of the same species, or the treated wooden surface of houses made of logs or timber, can DIFFERENTLY maintain the quality of protection from UV or resist aging, wear, cracking, etc.

ColorLak pigments protect wood from UV and extend the life of Anta Oil Wax

One of the main factors in the destruction of wood is exposure to solar UV radiation.
Anta oil wax of the "Eco Natur" series was created as a protective impregnation with absolutely natural composition, but with the maximum possible functions wood protection.
Using only natural ingredients in the production of Anta Oil Wax is POSSIBLE, but it is quite difficult to obtain results that can equally compete or even surpass in the quality of protection and some indicators other oil-wax impregnations from well-known foreign manufacturers, in the synthesis of which SYNTHETIC, active or artificially created protective agents are used components, such as, for example, a composition of active synthetic UV FILTERS.
Oil wax Anta technologists did not pursue dubious results and introduce artificial improvers and reflective additives or UV absorbers into the composition of oil waxes, but used a simple, INEXPENSIVE, accessible and KNOWN, natural and safe way protection of wood from UV.
The best safe solution that does not violate the ecological balance and composition of Anta Oil Wax is the addition of specially processed, prepared and highly purified natural EARTH pigments from foreign impurities to the Oil Wax, if desired, to increase the degree of wood protection and significantly increase its service life!
The addition of specially selected and prepared high-quality NATURAL EARTH PIGMENTS to the composition of Maslovovsk Anta SIGNIFICANTLY increased the degree of protection of wood from the effects of UV destruction.

EVERYTHING IS SIMPLE: Earth pigment is a finely crushed natural mineral that itself already has specific color, which COLORES the wood in the shade you choose.
Sun rays various spectrum and range, including UV radiation, falling on wood treated with pigmented Anta Oil Wax, which contains microparticles of these colored earth minerals, are partially REFLECTED from them or partially ABSORBED by them, thereby preventing direct contact, and therefore the load of these rays on the fibers and structure of the wood.

Why you need to choose a pigment from the COLORLAC series.
Fifteen arguments in favor of pigments ColorLak:

• ColorLak pigments have a very FINE GRIND, which allows you to obtain a completely even and HOMOGENEOUS color over the entire surface without visible interlayer transitions and joining stains on ANY wood,
• ColorLak pigments mix easily with oil base ANY Oil waxes or even with other impregnations on natural or non-natural organic bases,
• Colorlac pigments are environmentally friendly and safe. Does not reduce the level of harmlessness of Maslovosk,
• The ColorLak pigment is distinguished by a high degree of CLEANING from foreign impurities,
• Any ColorLak pigment is COMPATIBLE with each other, easily mixed to obtain various NEW color solutions or shades,
• The pigments produced for ColorLak and used for tinting Maslovosk Anta are practically NEUTRAL to the components of Maslovosk and most components of other impregnation manufacturers,
• Colorlak pigments DO NOT CONTAIN DRICKS, unlike high-quality pigments of “art paints based on natural oils”,
  What is SICKATIVE you can find out here → Another company's opinion about DRICKS is described here →
• Does not contain components that cause ALLERGIES,
• Tested for compatibility with Anta Oil Wax and guaranteed to evenly paint the surface,
• Colorlak pigments quickly and easily dissolve when introduced into Anta Oil Wax; they do not require special mixers for tinting Oil Wax. EASY TINTING : entered - mixed - finished result,
• They have increased wear resistance and resistance to UV and fading,
• Better COLOR FASTness. Colorlac pigments are among the most light-resistant in their class,
• Colorlac pigments have a VERY fine structure. ColorLak pigments are NOT “PRUSHED bricks” or clay with dangerous salts! Kohler ColorLak DOES NOT leave “pellets” of undissolved pigment or “sand” that can get dirty after drying, so they do not require a large amount or concentration in total mass composition,
  Convenient packaging Colorlac pigments - 100g And 500g. (in other containers - on order),
• Colorlac pigments have a higher concentration compared to pigments from other manufacturers.
  You SAVE SIGNIFICANTLY on the amount of pigment introduced per 1 kg of tinted composition,
• They do not require special storage conditions. They have an unlimited shelf life.
• The ColorLac pigment from Arichemie is practically not subject to degradation for a very long time,
• They are not afraid of negative temperatures. They can work and be added to the composition down to -35C! Certified for Europe and Russia.
  
  ColorLak pigments are manufactured and began to be supplied to our order by a world-famous company from Europe, Arichemie GmbH, after six months of testing and testing for compatibility with Anta Oil Wax.
  For tinting Anta Maslovak, color-fast pigments of the Vocaplast-MP and HelioColor-W series are used,

Why was Arichemie chosen as the manufacturer of PIGMENTS for OIL WAX?

• Arichemie GmbH is the largest pigment manufacturer on the world market.
• Many global companies that produce paint and varnish products purchase pigments from Arichemie, color their compositions with them, package and resell them under their own brand,
• Arichemie GmbH pigments are the most colorfast in terms of operating time,
• The Vocaplast-MP and HelioColor-W pigment series can be produced in the form of a paste based on natural oil, which eliminates harmful or active chemical components. The tinting paste contains only pigment and natural oil,
• Arichemie GmbH pigments of the Vocaplast-MP and HelioColor-W series are balanced with Anta Oil Wax and do not violate the ecological basis of Anta Oil Wax,
• Pigments from Arichemie GmbH are convenient and easy for DIY tinting of any oil-based composition. To give the desired tone or shade to the tinted composition, NO SPECIAL EQUIPMENT or conditions are REQUIRED. The tinting process can be performed anywhere: entered required quantity pigment - mixed - got the finished result,
• Pigments various colors EASY TO MIX. In this case you can get very a large number of intermediate shades and tones,
• The high concentration of Arichemie pigments makes it possible to reduce the amount of pigment introduced into the composition being tinted by several times. You SAVE significantly compared to even cheap pigments,
• Regarding the proportionality of the amount of pigment consumption to the share of the tinted composition when calculating the tinting of the composition per 1 m2, Arichemie pigments are cheaper and more economical,
• Arichemie GmbH pigments of the Vocaplast-MP series, as well as HelioColor-W, have a very fine grinding in their structure, which makes them much more advantageous than other manufacturers.
• The Vocaplast-MP and HelioColor-W series of pigments are easily dissolved in oil-containing compositions and do not leave heterogeneous streaks and clots that can crumble on the painted surface,
• Arichemie GmbH products are not afraid of negative temperatures; these pigments can be stored at MINUS temperature, they are not afraid of freezing, do not require specially prepared warm storage facilities and warehouses, and have an almost unlimited shelf life, which is regulated only by the period of the issued certificate.

COLOR PALETTE OF PIGMENTS ColorLak

TD ColorLak, together with Arichemie, has developed and offers READY-MADE SOLUTIONS for tinting Anta Oil Wax, represented by high-quality concentrated pigment pastes of various colors and shades.
Below are samples of wooden surfaces on PINE wood that were treated with PIGMENTED Anta Oil Wax.

For best rating color rendition and better visual perception by you all color range available paints of treated wooden surfaces with tinted Maslovak, our specialists have prepared for you several options for test samples that were made different ways(for example, scanning paint samples on a high-performance and high-quality SCANNER to the maximum possible quality to minimize color loss when scanning a sample or taking “live” photos from painted samples in NATURAL DAYLIGHT with a professional high-resolution camera and with NOT distorted color rendition, which occurs when shooting on cameras with a poor matrix) before posting them on our website.
We understand that different MONITORS can transmit color differently, and scanners and cameras that were used to record color and obtain finished results before posting photos of colors on the site can also produce slight difference in saturation compared to real flowers when viewing a sample live. Therefore, WE RECOMMEND that if your home computer monitor has a low resolution or a “weak” color matrix, USE any TABLET or screen good SMARTPHONE and when viewing, you will receive colors that may be practically no different from real samples.

Samples are SPLIT and colored: LEFT edge - 6%, RIGHT edge - 10% pigmented Oil wax ANTA
To ENLARGE the size of the picture, CLICK on the selected PHOTO
Oil wax Anta WITHOUT PIGMENT
color WHITE(supplied dry)
color ROSEWOOD. (Black)
color WENGE
color NUT
color OAK
color COGNAC
color MAHAGON
color CHERRY
color BEECH
color GOLD(Yellow)
color RED

VIDEO instructions on how to tint Maslovosk.
Watch VIDEO on how to add PIGMENT to Anta Wax Oil
for surface treatment under VALUABLE WOOD

The process of tinting colorless Oil Wax ANTA is VERY SIMPLE. Self-pigmentation of oil wax can be done and is possible at any time of the year, at ANY TEMPERATURE and regardless of when you plan to use the finished COLOR Oil wax for its intended purpose, because Its shelf life is practically unlimited if stored in a tightly closed container and at a low temperature, and takes 5-10 minutes.
For a better understanding of the simplicity of the process of independently tinting Anta Oil Wax in the desired color or to obtain, when applying pigmented Anta Oil Wax, the effect of VALUABLE WOOD from an ordinary pine board, we have prepared for you detailed VIDEO INSTRUCTIONS on how to make STANDARD oil wax from colorless Oil wax and pigment paste ColorLak Tsvetnogo Oil wax Anta in just 10 minutes.
← to WATCH THE VIDEO of tinting OilWax Anta

CALCULATION OF THE Amount OF PIGMENT for tinting OilWax Anta in STANDARD factory packaging:

TD Color-Lak, when introducing pigments into Oil Wax, RECOMMENDS that in order to obtain the MAXIMUM effective color rendering and naturalness of the shade of the tinted wooden surface in the desired color, adhere to the proportion of pigment to one part of Oil Wax - from 5% to 12%.

Those. in practice, for 1 liter of Anta oil wax you need to add only 60 - 100 g of pigment from the ColorLak series.

1. Oil wax Anta 2.5l- for getting 6% 150g PIGMENT
2. Oil wax Anta 5.0l- for getting 6% Pigmented OilWax REQUIRED 300g PIGMENT
3. Oil wax Anta 2.5l- for getting 10% Pigmented OilWax REQUIRED 250g PIGMENT
4. Oil wax Anta 5.0l- for getting 10% Pigmented OilWax REQUIRED 500g PIGMENT

BUY PIGMENT for tinting Maslovsk from ColorLak

Price PIGMENT The ColorLac series of Arichemie GmbH consists of 5.50 RUR for 1g

← Place an ORDER and BUY Colorlac PIGMENTS

Pickup points for OIL wax and PIGMENTS:
- G. (any quantity, consultation with a technologist)
-at our other points and pick-up points PIGMENT ColorLak is supplied TO ORDER or by agreement.

when ordering PIGMENT together with Oil wax from 10 kg

EXAMPLES of processing wooden houses with ColorLak PIGMENT PASTES. PHOTO.

• EXAMPLE of applying Oil wax and WHITE PIGMENT to a log house in a ratio of 13-15%

• EXAMPLE of applying COLORED oil wax in COGNAC color.
  Tinting a house made of timber in the tone "COGNAC" Anta oil wax with ColorLak pigment

Treating a house made of profiled laminated veneer lumber with an antiseptic impregnation on an oil-wax basis Maslovosk STANDARD with a pigment of "COGNAC" color in a ratio of 6%. The oil wax was applied with a Felt Mitten.
- The assembly of a house from profiled laminated timber with a section of 200x150 was carried out by Terem-Grad on May 24, 2015.
- Treatment of the walls of a wooden house made of laminated veneer lumber was carried out after preliminary GRINDING of the timber with sandpaper No. 150 manually carpenters SK Terem-Grad followed by the initial application of fire retardant composition PIRILAX-LUX or ANTEX-PREMIUM with a consumption of fire-retardant antiseptic impregnation from 250 g/m2.
- After 10 days, the house was treated with Anta Oil Wax with Cognac pigment. The consumption of Anta Oil Wax was 70 g/m2.
- Independent customer comments about our work on GRINDING a house made of timber or the quality of work on applying Oil Wax, reviews about the quality of the Oil Wax composition, the quality of PIGMENTS, the results of Oil Wax in PROTECTING the house from moisture, UV, cracking, etc. you can receive from the customer of this house by e-mail:
Vladimir Vlasov MO, Istrinsky district, village. Buzharovo.

Click on the photo to enlarge the picture full screen

Flaxseed oil is a natural substance obtained by cold or hot pressing of flaxseeds. Pure oil can be used on its own finishing coating, but in the untreated state it is ineffective due to its low ability to polymerize (dry).

When talking about impregnating wood with linseed oil, they usually mean using drying oil. This is a composition modified by heat treatment and the addition of chemical additives that accelerate the polymerization process. Drying oil is also called “boiled” or “boiled” linseed oil.

Features of finishing with raw oil and drying oil

When treating wooden products with pure linseed oil, you should be prepared not only for long drying, which can take up to 3 days (for each layer), but also know a number of important features. The raw product is actively absorbed into the structure of the wood, so coating the wood with linseed oil has to be done in 5-7 or more layers. When it dries on the outside, it does not polymerize well on the inside, which is why a seemingly dry product can leave oil stains for a long time. Exposure to ultraviolet light significantly speeds up the drying process. In the sun, treated wood can dry out in 6-8 hours, but the tone of the coating will change: it will become yellowish or even slightly brown.

Drying oil, thanks to its high polymerization rate, has completely different properties: it dries quickly, is not absorbed so actively, and does not change its color. This makes it more practical to use. Regardless of the conditions, the answer to the question of how long drying oil dries is clear - no more than a day (at 20°C). This distinguishes it favorably from raw flaxseed oil. Further speaking about this type finishing, we will mean linseed oil.

Where is the best place to apply this finish?

Impregnation of wood with linseed oil does not provide solid protective film resistant to scratches and abrasion. But this view decorative finishing They are valued for other things, first of all - environmental friendliness, antiseptic properties, the ability to emphasize the texture of wood and preserve it from cracking.

Flax drying oil is used for finishing products used indoors. It is optimal for covering furniture surfaces that are not subject to intense abrasion, wooden walls and ceilings. She's being treated wooden dishes, Kids toys. It is appropriate to apply linseed oil to the surface as a decorative and protective finish. valuable species wood to maximize the preservation of their natural qualities.

How to coat wood with linseed oil?

Preparation. The oil is applied to a dry and sanded surface. Wood moisture content should be at least 15%. It is recommended to carry out work at a relative air humidity of no more than 80%. When applying the composition to oily wood, the prepared surface is additionally wiped with white spirit.

Application. For work, use a brush, swab or lint-free cloth. The composition is evenly distributed on the surface and allowed to penetrate into the wood structure for 15-30 minutes. Excess oil that is no longer absorbed is wiped off with a rag or swab along the fibers. To avoid staining, ensure that the oil is evenly distributed on the surface.

Each new layer is applied after complete polymerization of the previous one with preliminary sanding. The number of layers required (in the case of drying oil from 1 to 4) depends on the specific use of the product and the type of wood (small-vascular species require fewer layers due to low absorbency).

The complete drying time for each layer is up to 24 hours.

How to restore oil coating?

Over time, the surface impregnated with linseed oil changes its color, begins to look dry, or wears off. This coating short-lived, but this disadvantage is compensated by the ease of its restoration. When applying a second coat, the oil will hide all scratches and restore the appearance of the wood. If desired, linseed oil can be tinted with pigments to achieve the desired color shades. For products not subject to intensive use, the restoration procedure is carried out every two to three years.

What is oil wax and how to make it yourself?

Linseed oil with wax is an effective decorative and protective coating that gives wood high moisture-proof properties and increases its wear resistance. Impregnation adds a silky shine to surfaces and emphasizes the natural qualities of wood. Suitable for processing light and dark wood. A completely natural impregnation is optimal for finishing wooden floors, stairs, doors, furniture and other items subject to intense wear.

It is not difficult to prepare linseed oil and wood wax yourself. The easiest way: add grated beeswax to oil heated in a water bath and bring to a homogeneous consistency. The classic proportion by weight is 1:1. The ratio of wax and linseed oil can be varied, creating compositions of varying degrees of viscosity: from thick mastics to liquid impregnations that penetrate deep into the wood structure.

How to avoid spontaneous combustion?

The process of oil oxidation upon contact with air is accompanied by an increase in temperature, which can lead to spontaneous combustion of oil-vapor rags, tampons, sponges, etc. Before disposal, all consumables that were used for wiping off linseed oil should be thoroughly dried in a straightened state outside the room, or better yet, soaked in water or immediately burned. To store the dispenser and other tools in contact with oil, use airtight containers.