Do-it-yourself plate stand on the table. Do-it-yourself stand for a decorative plate. Video: How to creatively decorate walls with decorative plates

Any hostess wants to equip the kitchen to her liking. But the kitchen will look cozier and more modern if it is supplemented with creative accessories. We are used to the fact that the dish holder looks very simple - metal structure... Here are some cool ideas for a stylish kitchen.

Pencils in business

To create such a holder, you will need a wooden tray, leftover pencils, and a drill. You need to fit all pencils to one size, this idea will appeal to those who draw a lot or draw real drawings by hand. Holes are evenly made in a wooden tray, after which pencils are inserted into them. It is desirable that the pencils sit tightly in the holes, you can use glue for a more thorough fixing.

Wooden hanger stand

You need to prepare seven hangers. Metal loops are removed with pliers, and the hangers themselves are attached with screws. such a structure can be supplied in country house or in the country. Guests will definitely appreciate the creative DIY plate holder.

Dish stand "home"

It takes imagination and design skills to make such a cymbal stand. First from wood plywood a low house is being made. Do not forget about windows and doors, such details turn ordinary things into designer ones. Next, you need to make a roof from the slats. The stand looks like a house without roofing material.

If you have a couple of free evenings, why not get busy making crafts for the kitchen and home? After all, with your own hands from improvised, natural and even waste materials, you can create a bunch of useful or just beautiful little things. In this article, we have presented 50 inspiring photos and 12 super ideas with step by step master classes for making decor items, storage accessories, kitchen utensils and more.

Idea 1. Stand for a tablet from a cutting board

Watching your favorite TV shows on your tablet or peeking at a recipe book while cooking will become easier if you make a special stand for this from ... an ordinary cutting board. Making this kitchen craft with your own hands will take no more than two hours, and it will be used every day.

To craft a recipe book or tablet holder you will need:

• You can use an old chopping board or buy a new one (wooden is best, but bamboo will work as well). Its size should not be much larger or smaller than the tablet.
• A small wooden plank, or better a piece of molding (it will be he who will hold the tablet / book).

• Another piece of wood or plywood from which a sharp triangle can be cut;
• Paint or stain in the desired color, e.g. to match countertops, fronts or apron kitchen ;
• Paint brush or staining rags;
• Jigsaw or saw;
• Wood glue or any other glue with strong hold.

Instructions:

1. Use a saw or jigsaw to shorten your plank or molding to the right size(across the width of the board), sand the edges sandpaper then just glue to the bottom of the board.

1. Cut from a piece of wood a support for the stand in the form of a sharp triangle with a right angle as in the photo below and glue it too.

The angle of inclination of the holder will depend on the slope of the hypotenuse of the triangular bar.

1. Paint the entire piece following the paint manufacturer's instructions and let dry.

1. If desired, the handle of the resulting stand can be decorated with a jute rope or ribbon. This way, when the stand is not needed, you can hang it on the hook.

Also, the craft can be additionally decorated - for example, artificially aged as in this master class, draw inscriptions, burn out the drawing, cover with slate paint. In the next selection of photos, you can get ideas for decorating original cutting boards.

Idea 2. Jute coasters

If your kitchen (or, for example, a country or summer kitchen) is decorated in a rustic, Mediterranean, rustic or nautical style, then you will surely love this kitchen craft idea. In just a couple of hours you can make your own plate coasters for the whole family and guests with your own hands.

To make one 33 cm diameter substrate you will need:

• 10 meters of jute rope 1 cm thick (sold in hardware and hardware stores);
• Hot glue gun;
• Scissors.

Instructions:

Just start rolling the rope in a circle, alternately coating with glue. small areas and fixing them for a while. When the mat is formed, cut the end of the rope and glue it on.

Idea 3. Organizer for cutlery and kitchen utensils from jars

Tin cans cost nothing, but they are durable, easy to clean, and their shape is just right for storing all kinds of shovels, ladles, forks, spoons and other utensils. If you put a little effort and creativity, you can make a convenient and cute organizer out of them, which, if it doesn't fit into the interior of an urban kitchen, will definitely take root in the country. And also an organizer made with your own hands from cans can be used to store tools, brushes, felt-tip pens and other little things.

Stand for spoons and forks from cans

To make such a stand for spoons and forks, you will need:

• 4 or 6 clean and dried cans without lids or burrs;
• Acrylic paint for metal or enamel paint (it will protect the cans from rust);
• Several wood screws and a screwdriver;
• Thick nail and hammer;
• Furniture handle or leather strap with fittings;
• A small wooden plank.

Instructions:

1. Paint the cans inside and out and let them dry for one day.
2. If necessary, file the wood plank to the desired size, sand, clean and finally paint (not necessarily the same color as the cans).
3. Take a nail and a hammer and make a hole in all the jars for a self-tapping screw.

Tip: To facilitate this process and not damage the paint layer, place a small block on the table using a clamp, then wrap the block with felt and only then put a jar on the block (see in the next photo collage the picture in the lower left corner)

1. Place the jars against the board and align them as they will be mounted later. Mark the location of the holes on the board with a pencil.
2. Use a hammer and nail to poke small holes in the board where the marks will be.

1. Screw a self-tapping screw into the hole in the first can to secure it to the board. Repeat the procedure with all the remaining jars.
2. Finally, install on the butt wooden board furniture handle or leather strap using the same screws. Ready!

Here are a few other deco ideas and modifications for can stand designs.

Idea 4. Topiary for kitchen or home decor

Topiary is a small decorative tree that is used to decorate a dining or coffee table, chest of drawers or mantelpiece. And topiary is also a great addition to a gift, especially if you decorate its crown with, say, sweets or flowers. Making such a craft with your own hands does not take much time, does not require the use of expensive materials, and even beginners can do it. Having mastered basic principle, you can create topiary for any occasion, any shape and design. Take a look at our selection of homemade home decor photo ideas, you will surely like something!

Halloween kitchen decor idea

To make crafts you will need:

• A base of foam, plastic or floral foam in the shape of a ball or other desired shape;
• Trunk (an even branch of a tree, pencil, or any other small stick);
• Decorative elements for creating a crown: coffee beans, artificial flowers, cones, colored beans, etc.;
• Decorations for masking pot filler, such as moss, pebbles or sisal fiber;
• Flower pot;
• A pot filler that will hold the stem in place. For example, fit cement mortar, all the same foam or alabaster (nai the best way);
• Thermal glue in the gun;
• If necessary, you will need paint to decorate the trunk, base or pot. You can also decorate the trunk with a ribbon or twine.

Basic instruction:

1. To begin with, it is advisable to paint the base in the color of the crown elements so that possible bald spots are not noticeable. You can also paint the trunk and pot and leave them to dry.
2. Cut a hole at the base of the crown under the trunk a couple of centimeters deep, fill it with glue and fix the trunk.
3. Take the base of the crown and begin to glue the decorative details piece by piece. The principle of action at this stage is simple: first, large parts are glued, then medium and, finally, small elements fill in the bald spots. You need to glue the decor quickly, until the glue is absorbed into the base.
4. Dilute the mix for fixing the trunk in a pot according to the manufacturer's instructions and fill the pot with it, no more than a couple of centimeters to the edge. Next, insert the barrel, hold it a little and then leave it to dry for a day.
5. Disguise the filling of the pot with a decorative "cover" (you can fix it a little with glue).

Idea 5. Serving Tray Board

But the idea of ​​an unusual serving tray-board, which, although not a cutting board (intended for laying out products only in dishes), can nevertheless be very functional. For example, it can be used to beautifully serve snacks for drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Thanks to the slate part, until the board is used for its intended purpose, it can simply be hung on the wall and used for writing.

To make this do-it-yourself kitchen craft, you will need:

• Board wooden thick 5 cm;
• Stain in the desired color (for example, to match the countertop);
• Sponge, rag, or brush;
• Slate paint;
• Two furniture handles and wood screws for fastening them;
• Jigsaw or saw;
• Screwdriver or screwdriver;
• Ruler, pencil.

Instructions:

1. Cut your board to the size you want using a hand / electric saw or jigsaw. In this workshop, the board is 60 cm long, but you can make it shorter or longer.
2. Paint your board with wood stain according to the manufacturer's instructions and let dry.

1. It's time to paint inner part... To do this, first glue masking tape around the edges of the board to limit the painting area. Next, apply slate paint (in this case, paint in a can) and let it dry.

1. Screw the handles around the edges of the board.

You can replace furniture handles with leather straps, paint the board in bright color, burn a picture on it or attach to it back side two "legs".

Idea 6. Stand for mugs and glasses

If you are the type of person who collects wine corks (just for fun or in the hope of someday making something useful out of them), then you will love this craft idea.

To make one mug stand you will need:

• 8 plugs (respectively, for the manufacture of a set of 4 stands, 32 plugs are required);
• Roll cork board, rug or plate stands (for cutting out the base of the cup holders);
• Hot glue;
• Leg-split.

Step 1. Arrange your plugs in pairs in a square format, as shown in the photo below. Using hot glue, apply a bead of glue between two plugs and press them together for 30 seconds. Repeat the procedure with all other pairs.

Step 2. From a sheet cork (board, rug) cut a square corresponding to the size of the future stand. Next, apply thermal glue to it, wait 15-20 seconds. and glue your blanks.

Step 3. Fill the gaps between the plugs with glue and let it dry. For better adhesion of the glue to the plugs, you can put a press on the workpiece.

Step 4. Wrap twine around the craft and tie a knot.

Self-made coasters for mugs, glasses and glasses can be beautifully packaged and presented to a friend

If desired, the coasters can be made round, triangular or hexagonal by cutting off the excess with a knife.

According to the described principle, you can make such a hot stand with your own hands. By the way, an old CD will work as a basis in this case.

Idea 7. Wall panel

Another craft idea for home and kitchen, which you can make with your own hands from wine corks, is a wall panel for decorating the interior and storing notes, memorable photos and postcards.

Panel from corks in a frame from Ikea

To work, you only need a beautiful frame (from a picture or a mirror), paint of the desired color, hot glue and a large pile of corks. Stoppers can be laid out in a herringbone pattern, in a checkerboard pattern, in even rows, and in other ways that you like. If necessary, for example, if there are not enough plugs, they can be cut lengthwise or crosswise. And to make the corks easier to cut, you need to soak them in hot water for 10 minutes.

Other interesting ideas making wall panels do it yourself.

Idea 8. Universal knife holder

Knife stand - very useful device for the kitchen, which helps to keep the workspace tidy and keep the knife blades sharp for longer.

Making a knife holder with your own hands is very easy - just pick up a small vase and fill it tightly with bamboo / wooden skewers, colored beans or ... colored spaghetti, as in our master class.

To make a stand for knives, prepare:

• A container or vase as high as the blade of your largest knife. The shape of the container can be any, but without any bends;
• Spaghetti, lots and lots of spaghetti;
• Multiple ziplock packages big size(or just large bags that can be tied tightly into a knot);
• Alcohol (for example, vodka);
• Liquid food coloring in the desired color (or multiple colors if you want to make a multi-color filling);
• Trays;
• Aluminum foil or old oilcloth tablecloth;
• Paper towels;
• Kitchen scissors.

Instructions:

1. Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is full, take out the spaghetti and add a couple more bunches of pasta to this heap in reserve (in case of replenishing the broken sticks).
2. Divide the spaghetti evenly into the bags and add enough alcohol to wet all the sticks. Then add 10-40 drops of food coloring to each bag.

1. Seal or tie your bags, then put them in additional bags to avoid leaks. Shake and turn the bags slowly to mix the dye with the rubbing alcohol and pasta. Next, put the bag on one side and leave for 30 minutes, then turn the bag over again and leave it for another half hour. Continue to soak the spaghetti in this way (but not more than 3 hours) until they are the desired shade.
2. Cover your baking sheet aluminum foil, then layer paper towels(or oilcloth). To protect your hands from staining, it is advisable to wear gloves. Remove the spaghetti from the bags, after draining all the liquid, put them on a baking sheet in one layer and leave to dry. From time to time, spaghetti needs to be sorted out to dry evenly.

1. Once your spaghetti is COMPLETELY dry, start placing it in the container.
2. Shake the filled container and flatten the spaghetti. Insert your knives to determine the optimal filling density, add pasta or remove excess as needed.
3. Now, using kitchen scissors or other very sharp scissors, trim the spaghetti to the desired length without removing them from the container (it is best to do this over the sink). It is important that the spaghetti does not exceed the height of the container by more than 2-3 cm, otherwise they will quickly break.

Idea 9. Jars for storing spices and bulk products

Today we will talk about the express technique for making paper baskets that can be used to store small things (keys, stationery), yarn, as well as for an unusual serving of fruits, Easter eggs, bread or pastries for a festive table or as a gift.

Even a child can weave such baskets quickly and easily.

You will need:

• About 15 sheets of A3 thin paper, cut in half along the sheets (this can be printer paper, a sheet of newspaper in full spread, and even baking paper);
• Capacity suitable size with straight walls (for example, a jam jar);
• Glue stick;
• One skewer;
• Spray paint (optional).

Instructions:

1. Starting at one corner, start rolling the sheet of paper tightly around the skewer to the diagonally opposite corner to form a straight and long tube. When the straw is ready, add a few dabs of glue to the corner of the paper to hold it in place and pull the skewer out. Do the same with all the remaining sheets. In this master class, weaving 2 baskets took 30 tubes.
2. If necessary (for example, if you used newspaper sheets) or if desired, paint the tubes with acrylic paint.
3. Take an even number of tubes and connect them together as shown in the photo in the upper left corner. In this master class, a basket the size of a jam jar took 6 tubes, for a larger basket 8 tubes.

1. Start braiding: take one of the outer tubes (which is under the grate) and run it over the adjacent tube, then run it under the next tube, then pull the tube out again on top of the next tube, etc. Continue weaving by lifting the already wrapped tubes vertically (now these tubes will be called uprights).
2. When 2-3 cm remain from the first working tube, increase its length. To do this, apply glue to a new tube and insert it into the remaining “tail”. Continue braiding over and over, adding paper tubes as needed.
3. As soon as you braid the base of the desired diameter (the same size as the container), place the container on it and begin weaving around it, pulling the stand pipes close to the walls.
4. After finishing the basket to the end, take out the can and carefully wrap the end of the working tube into the weaving.
5. Wrap the ends of the uprights inside the netting and cut if necessary. Then you can spray paint from a spray can as in our master class.

Idea 11. Wall-mounted holder for towels and kitchen utensils

From an ordinary grater, you can make such a convenient and beautiful holder for a towel and storing kitchen utensils or even living or artificial plants.

From a flat grater, you can do it yourself with your own hands to make a decor for the kitchen in the force of country, provence or shabby chic

To make a heated towel rail and a tray for small items, you will need:

• Grater (preferably old, but a regular new grater will do, as long as it is metal);
• Patina for metal (for artificial aging of the grater);
• Small cutting board or just a wooden board;
• Wooden die (for the bottom of the grater);
• Glue.

Instructions:

1. Follow the manufacturer's instructions to cover the grater with a patina for metal, for example, in green, as in this workshop.

1. Install a wooden bottom on the inside. It must first be cut to the size of the upper part of the grater. As a rule, at the top of the grater there are projections from the metal handles, it is on them that the bottom will be attached.
2. Screw the grater to the board with self-tapping screws, after making holes in it with a nail and a hammer.
3. Install the board on the wall near the sink, hang a towel on the handle, fold your spades, scoops or flowers inside.

Idea 12. Flower vase

Glass bottles for wine, milk or other drinks are almost ready-made vases that are just waiting to be painted acrylic paints and / or trimming.

If you scrupulously select every little thing in your home, then you pay a lot of attention to even the smallest details. These stylish DIY hot coasters will fit perfectly into your modern interior... Indeed, today it is extremely fashionable to use natural and natural materials... This is exactly what real twine and cork are.

It is not difficult to make stylish coasters.

Before work, in addition to twine and cork material, you need to prepare a knife and hot glue.

You can use old cork mouse pads as a base.

So, draw a circle on the base material and cut out. Make a small notch to hide the end of the rope.

Starting at the edge, glue the string in a spiral pattern until you reach the center.

Such coasters can be relatively small size for glasses and cups. And there may be larger ones - for plates, and maybe even pots and pans.

Make at least six of the same plate coasters. When guests come to you, use them for table setting, it should turn out to be very interesting and creative.

If desired, the twine already in the finished product can be painted in any color that best suits your interior.

However, the special charm of this kind of handicrafts is in the raw materials.

The decision is yours - be creative!

Decorative ceramic plates on the wall are gaining new popularity now. Such decor is more and more common among designers and in fashionable interiors!

How to beautifully place and hang souvenir plates on the wall:

• 5 ready-made layouts and rules for beautiful hanging!
• 6 ways to make a DIY ceramic plate mount or how to use wall holders and hooks

You won't need much effort to attach such a souvenir to the walls, but a spectacular and original result is guaranteed!

But whichever of these decoration methods you choose, then everyone will have to complete the next process - attach the plates to the wall. Here, too, there are several methods on how to fix and attach plates to the wall:

How to hang a plate on the wall without nails

The easiest method of fastening does not require nails, which does not even require you to be able to drill walls and is to buy at a stationery store special double-sided Velcro.

• if the plate is small, it is enough to glue one Velcro on it and attach it to the wall,
• if bigger size- a few on a plate.

Remember that this method must take into account the weight of the plate if you want it to remain intact.

The second method does not require nails:

1. We glue any base to the plate - it can be a block of wood or a piece of six tin can... The only condition is that it must be firm, keep its shape and not sag from the glue.
2. We are waiting for our base to dry on a plate.
3. And then we attach the base with the plate to the glue directly to the wall.

In this case, the base improves the adhesion of the smooth plate to the wall. In addition, many plates are not completely flat - which makes them difficult to glue. Therefore, they use the base.

Which glue is better to take? Liquid nails or cold-weld glue are great.

DIY wall plate holder

By using cold welding glue a ribbon on the back of the plate, for which to hang the plate on a nail. If you don't like the look of the mount on the back of the cymbal, you can decorate it. Here, of course, you will have to make holes in the wall. But beauty requires sacrifice.

If you don't have special cold welding at home, you can use regular superglue.

Glue the ribbon to the plate, and on top also stick a circle (square, or whatever you like) of paper to secure the ribbon and make the design more reliable.

Fastening the plate with electrical tape or plaster

If you have a lightweight ceramic plate and have electrical tape or plaster on hand, you can use that as well. When attaching the tape, keep in mind that its end should be long enough to glue abundantly along its entire length, in order to prevent the tape from slipping out from under the electrical tape.

Fastening with a paper clip, wire and hairpin

You can also make a circle-attachment from a regular olive lid, for example. Or take a wire or a hairpin

1. A gun with silicone rods can be used. The main thing is to warm it up well and quickly attach a wire, a pin to the plate.
2. In all these ways for better result need with began to degrease the back of the plate, you can even scratch it a little so that the adhesive materials do not lag behind and hold the mounts securely.

Ready-made hooks for ceramic plates on the wall

You can also use special mounts-stands, which are attached to the wall, and a plate is placed in them, or several, depending on the size of this stand.

There are 2 types of such holders:

1. metal on a spring basis,
2. self-adhesive circles with loops.

In stores for hand made products or specialized art workshops, special self-adhesive circles with loops are sold that can be attached to a plate. Or the same type of attachment, but requiring the application of superglue to attach to the surface of the plate.

How do I choose a commercial wall mount? Only by the weight of the plate: if the plate is massive, then the best option is on a spring, if the plate is small, then take a self-adhesive one.

The process of mounting plates to the wall

Before attaching the plates to the wall, we highly recommend that you first make a paper layout. This is especially true if you use nails for fastening. Yes, and without a nail mount - if the plates are not glued correctly, it will also leave an unattractive flaw on the wall.

1. We put the plates on the paper, circle them and cut them out. This will give you the exact diameter of the cymbal.
2. We lay out the layouts on the wall.
3. We fix them mounting adhesive tape for painting- it does not leave marks on the paint or on the wallpaper.
4. We outline with chalk or pencil, which can be easily removed from the wall.

How to beautifully add a decorative plate

Plates can be placed and hung on the wall in different ways, while taking into account the interior of the room that you want to embellish. We offer several ideas that will help you make your choice:

Souvenir plates placement schemes

Already have ready-made schemes how to hang plates on the wall - we look and repeat. Also if you have a large item in the center for example beautiful mirror or a picture, then you can beautifully beat it with the help of plates.

Ceramic plate fixing rules

Chaotic order

If you like "creative mess", and you do not like strict lines, then the easiest way is to hang the plates different sizes in a chaotic manner.

• They may be one colors or with pictures(nature, for example).
• The plates do not have to be round, you can also use oval or square.

Magnets

When we travel, we usually bring fridge magnets as a memory of the cities and countries we have visited. But this will surprise no one. Recently, I began to notice that in souvenir shops you can buy not only magnets and cups, but also plates with images of the sights of the city you visit. So you can start bringing them in and hang them on the wall. Thus, you can immerse yourself in pleasant memories without being tempted to eat something from the refrigerator.

"Plate puzzles"

There are special decorative plates, on each separate plate a part of the figure is shown. Thus, by hanging all the plates on the wall, you get one complete picture - "Plate puzzles".

Geometry

Lovers of orderliness and symmetry can hang plates in lines or geometric shapes ... Smooth lines of equal-sized plates, or a gradual transition from the smallest plate to the largest. You can make a circle, oval or square from plates around a mirror or painting.

Can shape shapes from plates: flower, sun, waves or something more abstract.

Ideas for placing plates in the kitchen and living room

Where would such tarolochki look appropriate? The first step is great decor for the kitchen or dining area. Also pay attention to how they look harmonious in the living room, for example, over the sofa or near large mirror... If allowed square meters, then you can also decorate the hallway or bathroom wall with plates.

After finishing the renovation and arranging furniture, there is always a need to add accessories to the wall in the interior. Most often, you want to close the void on the wall in the kitchen or living room. One of the ways is decoration in the form of decorative plates. They are able to add flavor to any setting. Especially if decorating plates for walls or stands will be done by hand.

Large bright plates on the wall will perfectly complement the interior

Several decorative plates can be hung in the bedroom.

Even simple white plates will adorn the design.

Creating a unique decor for a kitchen or dining room with your own hands is not only a way to save money, an opportunity to get designer items exactly in the style and color scheme of the overall room decor. There are many techniques that you can use to get creative work done.

1. Decoupage with napkins, photo, cloth.
2. Quilling.
3. Stained glass covering.
4. Decoration with satin ribbons.
5. Artistic painting.

You can place plates anywhere and however you like

You can write words in English on the plates

Decoupage

Decoupage is one of the most interesting ways decorating plates. For decoration, you can use special napkins, magazine clippings, photos and even fabric with which you can really create original draperies. For work, you will need the following materials:

• PVA glue;
• scissors;
• brushes;
• acrylic paints;
• a container for water (for example, a deep dish);
• a ring from a can, if the product will be hung on the wall;
• acrylic lacquer;
• decoupage napkins (or other selected material);
• plate.

Plates do not need to be decorated, simply by hanging them on the wall you can decorate the interior

Decorative plates on the wall will perfectly complement the interior of the room.

A wall completely decorated with decorative plates will look very unusual.

After all the materials and tools are prepared, you can start decorating the plate using the decoupage technique. The main stages of work are shown in the table:

If necessary, you can draw some details of the picture with acrylic paints with a thin brush. This will make the result look much brighter. This is done after the base layer has dried before being varnished. For mounting on the wall, in addition to the described method, you can use various hooks or loops.

In the interior, you can use plates of different sizes.

Plates of different colors will look very nice.

Quilling

Quilling is a technique based on rolling thin strips of paper. The method is relatively new and very exciting. So, to create a unique dish you will need:

• plate (it is better to use a plastic or foam product);
• a set of paper for quilling (sold in stores of goods intended for creativity, you can buy a set of the most suitable color scheme);
• tools for twisting paper ribbons (sometimes come with strips), they can be replaced with an awl;
• toothpicks;
• ruler;
• simple pencil;
• PVA glue;
• image.

Making a product using the quilling technique includes several stages:

1. It is required to divide the decorative plate into 4 equal parts, while marking its center. Also, with a pencil, you need to mark the location of the drawing.
2. Making paper curls. With the help of ribbons, you can create whole compositions of flowers, birds, various patterns. Each element is coated with glue using a toothpick and attached to a plate.

Do not be afraid to come up with new elements and compositions from paper ribbons. The main thing is to choose the right color solution, which will perfectly fit into the interior of the kitchen or dining room. Also, do not forget about the hooks for attaching the plate to the wall.

Painting plates in Japanese style

Plates can be painted as you like

Decorative plates against a white wall look very beautiful

Stained glass

Stained glass always looks stylish on any interior item. For decoration in this way, you can choose a transparent glass plate so that the stained glass effect is noticeable.

For decoration you will need:

• glass plate;
• stained glass or acrylic paints;
• circuit;
• different beads can be used if desired;
• degreaser;
• brushes.

Before starting work on decorating the product with stained glass, the plate must be thoroughly washed and degreased so that the paint lies down and dries evenly. After that, it is allowed to outline the contours of the image with a pencil, or you can start working with paints without them, if there is a desire to improvise.

You can make such a collage from plates, and place a plate with a clock in the middle

Decorative plate with painting

First of all, a contour is applied to the plate and dried for several hours ( exact time for each type of paint is indicated on the package). Dry in a well-ventilated area. It is recommended to apply it in two layers so that the line is convex. Then you can paint the colored areas.

If there is a desire to add additional decorations, then it is recommended to do this when the paint begins to dry out. Lay out the elements with tweezers and slightly press into the layer. All actions must be clear and accurate so as not to spoil general form products.

You can decorate the plate with artificial flowers.

An example of using decorative plates on the wall

Plates can be used to create a collage on the wall

Decoration with satin ribbons

More and more often they are used for decoration in the interior satin ribbons... And, of course, with their help, you can quickly and in an original way decorate the plates. First of all, it is worth considering how to create decorative elements from atlas:

1. Weaving different ways from several ribbons. The result is a strip of the desired length with a pattern.
2. Sewing. It is carried out using a thread and a needle. A whole composition in the form of a panel is assembled from different pieces.
3. Kanzashi - flowers from satin ribbons.

The elements necessary for decoration are simply attached to the product with glue. Most of the time is spent on preparing parts of the overall composition.

Decorative plates in the kitchen will perfectly complement the interior.

You can decorate the plates yourself

Art painting

Plate painting is a rather complicated but exciting activity. Any drawn plot is allowed, it all depends on the general interior of the house. Landscapes, ornaments, fabulous or mythical subjects, flower arrangements, animals and birds, painting under Gzhel or Khokhloma look great on decorative plates.

For decoration you will need:

• white plate;
• degreaser;
• pencil;
• acrylic paints;
• brushes.

First, the plate is washed and wiped with a degreaser. Then a drawing is applied with a pencil, after which they begin to paint the product. When the paints are dry, they can be varnished.

Do not be upset if the artist's talent is completely absent. In this case, a stencil can always come to the rescue. Drawing with him will turn out to be no less beautiful. You can buy it in building stores or places where art supplies are sold.

You can hang decorative plates instead of paintings on the wall.

In the kitchen, decorative plates will perfectly complement the interior.

An example of the use of decorative plates in the interior

Using plates in decor

Choosing a way to create decorative plates, first of all, you need to remember about the general style of the interior and the color scheme. You can place them on the table, chest of drawers, mantelpiece. In such cases, you will still need to find or make a special stand with your own hands. Or the products can actually be hung on the wall. Let's consider several classic schemes:

1. In a row. Thus, you can highlight a certain area in the interior. For example, over a fireplace or sofa.
2. Symmetry. In this case, the plates should be placed exactly in relation to the pieces of furniture and at the same distance from each other.
3. Geometry. So you can originally fill the void on the wall by hanging dishes in the shape of a square, rhombus, or triangle.
4. Wave. To implement this method, you will need to mark a curved line on the surface of the wall and hang plates on it. It is better if they are of different sizes.
5. Arch. This placement of decor is ideal for the area around round mirrors or just over pieces of furniture, for example, in the bedroom above the bed.
6. Patterns. More difficult way- the creation of some kind of ornament or pattern from decorative plates. In this case, it is recommended to use objects of various shapes and sizes. You can, for example, decorate any of the proposed techniques with an unnecessary set of dishes and hang on the wall in the kitchen.
7. Location in size - from the smallest diameter to the largest, or vice versa. In this case, it is very important that all plates in the interior have the same shape.
8. Plot. This method suitable if the dishes have a certain story line... Then they should be located side by side.
9. Arbitrary arrangement of decorative plates on the wall. This method gives a lot of possibilities to the imagination.

A plate with a pattern of flowers will look very beautiful

You can paint anything on the plates

When choosing a way to arrange decor items, it is imperative to follow a few simple rules:

1. Completeness of the composition.
2. Symmetry in the interior.
3. Compliance with color and shape.
4. Accounting for the size of decorative plates.

The most advantageous way plates of any shape will look on the wall in the kitchen or living room. The main thing is to choose the right color for the picture and style. Exclusive decor will always delight with its beauty.

Video: How to creatively decorate walls with decorative plates