DIY two-story children's house. Children's wooden houses. Material to be used

Every girl dreams of a house for her dolls. Now there are a huge number of them on store shelves. But such pleasure is not cheap, and the assortment is the same.

We offer to please your child with a handmade gift. This will allow you not only to save money, but also to make the house one of a kind.

In addition, this will be a wonderful pastime for the whole family during leisure time.

There are many special training programs for making doll houses with your own hands. You can use a wide variety of building materials: boards, plywood, chipboard, laminate, cardboard, etc.

As a rule, the front wall on dollhouses is not made, or it is made removable or opening so that your child can put dolls there, change the decor in the rooms, and tidy up.

Choose the material - and we will teach you how to make a dollhouse with your own hands!

Dollhouses made of plywood and laminate

These are the most popular materials. Distinctive feature from “brothers” - stability and longevity. It is easy to decorate both outside and inside. But making such a house requires male strength.

If you try, such a house will be indistinguishable from the store version.

Diagrams and drawings can be found on the Internet, but if you have technical inclinations, you can try to draw it yourself. There are also photos of finished dollhouses on the Internet.

To make a house we will need:

• thicker plywood (from 7 mm);
• electric jigsaw;
• glue;
• self-adhesive floor;
• pieces of wallpaper;
• tape measure or ruler;
• pen;
• scheme;
• a little imagination and patience.

Let’s get to work, having first decided on the dimensions of the dollhouse (they will depend on the dimensions of the “tenants”):

• we cut out the walls of the future house from plywood or laminate;
• we cut out windows and doors in them;
• we glue the walls together; it is also fashionable to use construction nails or staples;
• we make a roof, it can be either flat or sloping. To give real look you can use corrugated cardboard and then paint it;
• We fasten the resulting structure to the foundation - a sheet larger than the house itself. On an unused area you can make flower beds, sidewalks, a platform, and a parking lot;
• we glue wallpaper and lay floors;
• furnish the house with furniture;
• you can also add curtains made from pieces of fabric, bedspreads, rugs, etc.

Dollhouses made of plasterboard

Many household parents, after renovations, leave the remaining building materials to gather dust on the balcony in the hope that they will come in handy someday. Their time has come! Drywall can make an excellent dollhouse.

The good thing about a house made from this material is that it is very light and easy to assemble. But, at the same time, it will need to be handled more carefully - it will be quite fragile.

The layout of such a house is no different from a product made of plywood or laminate. But assembling such a house is much easier, and there are many more layout options - with the help of partitions you can divide the rooms between each other.

Foam houses

To assemble such a house we will need:

Note!

• sheet foam;
• glue;
• canape sticks;
• rulers;
• bamboo sticks;
• cardboard;
• pieces of wallpaper and fabric;
• dye;
• sponge for washing dishes;

Pieces of plinth for the ceiling

Let's get started:

• make a diagram;
• cut out walls from foam plastic;
• we make doors and windows in them;
• we connect the walls using toothpicks, then glue the walls together;
• to make the roof stronger, we first install bamboo sticks on top of the walls, and only then glue the roof to the walls;
• from wooden rulers or use the same polystyrene foam to make a staircase;
• You can also use toothpicks for railings;
• in addition, if desired, you can also make a balcony, massandra or even a terrace from polystyrene foam;
• painting the house;
• We decorate the house inside as in the previous description.

Houses made from bookshelves and cabinets

House from old furniture it won’t be difficult to do - after all, the walls are already ready.

All that remains is to cut windows and doors in them, and think about what to make the roof out of, if necessary.

It can also be made from the materials described above. We arrange the furniture, let the cat in - happy housewarming!

Cardboard houses

For this design we will need:

Note!

• cardboard;
• house detail templates;
• scissors and stationery knife;
• gouache or watercolor paints.

We are building a house:

• If you have a large piece of cardboard, then do not cut it, but bend it in places according to the diagram, and then glue its component parts.
• install interior partitions made of cardboard, they will serve not only to delimit space, but also to fasten the frame structure.
• Let's get started with renovations and furnishings!

House made of boxes

The simplest and quick option. All you have to do is pick required quantity boxes (depending on the number of rooms), we fasten them together using a stapler, having previously placed them on their sides so that the top of the box serves as an exit.

This will allow you to open the front wall at the right time to rearrange, tidy up, etc.

We cut out windows and doors. Let's start designing the frame.

Note!

House made from paper folders

It requires four folders. We cover them from the inside with wallpaper or printed sheets with decorative items and household appliances in a plane.

We cut out windows in the folders, install the folders vertically, and fasten them with the help of clips that are included with each folder. Your house is ready.

Fabric house

This option is good because it takes up virtually no space and can even be folded up.

Using a thick piece of fabric, we make the back wall - it will serve as the foundation. We sew a rectangular base for the house. We make pockets to which the cardboard for the floors will then be attached. We attach ribbons to both corners of the pockets.

All that remains is to sew the pockets with a rectangular base on one edge so that the ribbons end up with reverse side. Floors using tapes and sewing the tapes to the back wall. Let's decorate the house and start playing!

You can make houses from other materials - the main thing is to show your imagination! A wonderful gift it will also be suitable for a boy - after all, you can build a garage, parking lot, etc.

To organize a child’s leisure time, parents have to rack their brains in search of a suitable solution. In fact, the answer is quite simple: in order for a child to spend the day in active games, it is necessary to organize his personal space. The way out of this situation would be a do-it-yourself children's house. In any yard you can highlight small area for the construction of a playhouse. All that remains is to select a diagram, materials, tools and get to work. Acquainted with detailed instructions you can in our article.

Common types

In order to make a children's house, you can use the most various materials that remained after construction or renovation, if there are none, purchase them from hardware store. Undoubtedly, the most popular lumber is:

• bars;
• plywood;
• boards.

Let's look at common options.

Plywood

The construction of a plywood playhouse begins with design, that is, they create a drawing or layout, from which it will then be possible to calculate the required amount of material and make blanks. At this stage, the places allocated for the door and windows are marked. To build the simplest summer hut, a couple of sheets of the selected material will be enough, but in general, the consumption will completely depend on the dimensions of the structure. Consider a few more important points:

• windows are located from the floor at a height of 60 cm;
• the doorway should be 15–20 cm higher than the child’s height;
• the dimensions of the future house should allow the child to feel comfortable;
• the roof is arranged at an angle of 45°;
• sheets of plywood can be cut with a regular saw and fastened with nails;
• All corners must be sanded sandpaper so that the child does not get injured during the game;
• When choosing paints and varnishes, it is best to give preference to safe and non-toxic types.

Note! The location of the house should be advantageous for parents: it should be as visible as possible from the windows or from the porch of the house in order to constantly monitor the child.

Wooden boards

If you want to equip a durable and reliable house at your dacha in which your child can play all year round, then you should choose wooden boards. This material has a clear advantage - wood, when properly processed, is practically not subject to wear. The following points are taken into account:

• for the frame choose beams with a cross section of 5 cm;
• to enhance strength, the frame is covered with planks 2 cm thick;
• the finished house is covered with deck varnish;
• approach the coloring stage from a creative side, choosing bright colors and drawing your child’s favorite cartoon characters.

Note! As with any building, it is necessary to provide waterproofing for the roof in a wooden playhouse.

Hut on legs

To make not a simple house, but a fancy place for playing games, it is best to choose a fairy-tale hut on legs. An important stage is precisely the initial one. Having a drawing that is correct and calculated to the smallest detail, you can count on getting a practical and good-quality house. Choosing material to create your own interesting element– legs, you can stop at:

• wooden blocks;
• metal pipes;
• stones.

A variety of combinations are suitable for decoration. In addition, you need to pay attention to the following points:

• The height of the legs should not exceed 70 cm.
• The base of the legs is poured with concrete for stability.
• For convenience and comfort, there should be a low staircase or open steps.
• The whole house is assembled from wooden planks: first the frame is knocked down, which is then sheathed with boards.

Note! Since the house is a place for active games, the legs should not be high. The structure must be safe and stable.

Step-by-step construction instructions

To make a simple children's house made of wood, you will need to allocate a little of your time, collect the material with the tools and get to work.

Materials

Any construction must begin with planning. Only a clear diagram will allow you to calculate the required amount of material and make a purchase. For the described playhouse you will need the following materials:

1. Board panels (180×240 cm) – 6 pcs.
2. Treated timber (with a cross-section of 10×10 cm, length 180 cm) – 4 pcs.
3. Treated timber (with a section of 5×10 cm, length 240 cm) – 6 pcs.
4. Treated timber (section 5×7.5 cm, length 240 cm) – 2 pcs.
5. Ruberoid – 1 roll.
6. Screws (30 mm) – 2 packs. 500 g each
7. Screws (75 mm) – 1 pack.
8. Tar paper nails.
9. Wood stain – 10 l.
10. Thin planks.

The racks are formed from timber with a cross-section of 5×7.5 cm and a length of 240 cm. It is from these that the base for the board panels is made.

Note! When choosing a stain, you should choose two colors: 7 l - “light cedar” and 3 l - dark green.

Tools

From construction tools you will need:

• shovel;
• tamping;
• level;
• hammer;
• drill-driver;
• Circular Saw;
• beat;
• tassels;
• stationery knife.

Note! Make cuts circular saw necessary with inside panels to outside no chips formed.

Completing of the work

Before you do beautiful house To play games with your own hands, just familiarize yourself with the following algorithm of actions.

Floor and walls

1. A site for the future house is selected, leveled and compacted. If desired and available funds, it is recommended to dig trenches and fill a layer of crushed stone for support beams with a cross-section of 10x10 cm.
2. The length of the support beams is equal to the distance between the two outer posts of the board panels, that is, 140 cm. For convenience, you can take a beam with a cross-section of 5x7.5 cm and a length of 240 cm, attach it to one panel, and mark the locations on it. Thanks to the existing markings, you can install the logs without much difficulty.
3. The soil is leveled, focusing on the lowest point. First, the first support beam is installed, which will be the front, after which it comes to the rear. They check the evenness and horizontality, and then you can install the two central ones.
4. To fasten the supports together, use 2 beams with a cross-section of 5×10 cm and a length of 240 cm. They must pass between the racks of the board panel that will be the floor. They are fixed with screws. The resulting voids must be filled with soil, leaving air gap about 3 cm, which is necessary for normal air circulation.
5. Board panels are cut according to required sizes and choose the smoothest one for the floor. It must be laid so that it does not come into contact with the ground anywhere. To achieve this, you can additionally use timber trim. The edges must completely coincide with the support bars.
6. For correct cutting side panels, first mark the height of the side panels, that is, 150 cm. It is also necessary to leave a margin of 5.5 cm. Cutting should be done only from the inside.

Note! Don't forget to leave a little extra width for the back and front panels. Thanks to this, they will be able to cover the side pillars. To ensure overlap, it is necessary to measure another 2 cm from the outer edges of the posts.

Roof

1. Since the roof is the most complex element of the structure, you will have to concentrate and give all your attention. Labor intensity also lies in the need to unscrew all the rear panel posts in order to reattach them later. On the front panel, measure the distance from the top center point to the side point located below. This will allow you to decide where to place the roof panel racks.
2. Please note that the post that runs along the ridge must be placed exactly 5 cm from the center line. In this case, during installation, both racks will not overlap each other.
3. It is best to use beams with a cross section of 5x7.5 cm as additional racks (if any are needed). During installation, you should constantly check their perpendicularity to the top of the roof. If necessary, they are aligned along the bottom edge.
4. All irregularities on the tops are successfully masked by the ridge.

Note! Only remove and reposition the posts one at a time to maintain rigidity and strength.

Final stages

1. For a doorway, dimensions of 60x120 cm will be quite sufficient. This size will fit perfectly into the span between the racks. But if necessary, you can choose other sizes.
2. First of all, cut out the window(s), and then move on to the door. Please note that you need to be careful and attentive with the door; do not cut it completely, as the panel is not yet fully secured and the structure will lose its rigidity.
3. All elements are covered with stain and varnish. Apply paints and varnishes should be done both from the inside and outside to form a protective layer.
4. Using 75 mm screws, all elements are fixed to each other and to the support bars. Once the frame is secured, you can completely cut out the doorway and install the roof.
5. The door and shutters are made, the porch is assembled and fixed.

The most the finishing touch is the interior decoration of the house, making furniture, for example, tables and chairs.

Note! It is not necessary to insert glass into window openings; you can do without them altogether. Plexiglas, which is safe, will also work.

Don't forget that interior design also plays a big role, especially when it comes to little princesses who imitate adults during play. No matter what material and design to create playing space have been chosen, your baby will be happy. It is in the house that he can spend hours with pleasure every day active rest, developing imagination.

Video

Look what a beautiful house can be made from boards, timber and siding:

And here it is shown how to build a house from OSB:

Holidays at the dacha or personal plot– a great way to spend family time. However, children often become completely bored away from the city and have absolutely nothing to do. In this case, a gaming complex comes to the rescue, which can be made inside a child’s room. gaming house.Such a unique shelter, for example, made of wood, will fill children's games with new emotions and variety, and the creation of such a product can become another family game.

If you have already thought about how to make a house with your own hands, but were scared complex circuits and drawings - don’t lose heart. The construction of such a structure, with the right approach, will be able to amuse not only the children, but also their parents. It is important to acquire diligence, patience and good mood. Then any work, especially such creative work, will be a joy.

Let's get started: requirements for the house

Enthusiasm is not enough to turn a child’s life into a fairy tale and build a real, not a fictitious, kingdom for him. It is important to carefully structure the work and understand the design features. Whatever kind of house for children you want to make with your own hands, it must meet a number of requirements:

• The materials used must be completely safe (they must not be toxic).
• The house must have a safe design.

Everything in a children's playhouse with your own hands should be safe, including: paint coatings, impregnations for lumber, finishing and building materials. And also in the house there should not be rough surfaces and sharp corners. You don’t want to treat your beloved child’s injuries later, do you?

Before you start, it is useful to look at examples on the Internet finished projects. Pay attention to the drawings and diagrams, features appearance. You can find ready-made ones on the Internet. design projects made of wood or you can design your own children's playhouse and create it together with your child. This approach will not only help you have fun, but also allow your child to express himself creatively.

A do-it-yourself children's cottage can be of any size. It all depends on the area of ​​the site, the availability of materials and your desire. It could be a house, a hut, a castle, a den. Any fantasies can be brought to life if you approach the work correctly. Don't be afraid of difficulties.

To build a house you may need:

The finished product can be diversified with accessories, turning an ordinary building into a fairy-tale city or even a country.

Features of choosing a place

When choosing a place for a house, remember that this is primarily a children's playground. Therefore, it should be located as far as possible from parking spaces, ponds, and barbecue areas. And also pay special attention to the presence of wells and septic tanks nearby - under no circumstances should they be nearby!

The children's area can always be combined with the garden and then decorated:

• Garden gnomes.
• Children's labyrinths or green labyrinths.
• Characters from your favorite cartoons.
• Hammock.
• Swing.
• Sports stairs, horizontal bars, slides.
• Backlit.

In addition to all of the above, the chosen location should be clearly visible from all sides of the garden and from the windows of a residential building. Before deciding on a location, inspect the area you like from all sides.

Tree– the most popular material for creating children's playhouses. It not only inspires confidence, but also looks very impressive. In addition, even a beginner can master the construction of a wooden children's house.

When choosing a material for a future home for a child, pay attention to the properties of the selected wood. For example, conifers have a beneficial effect on health, therefore, in addition to entertainment, in such a house your child will receive prevention of many diseases. This is due to the high content of phytoncidal substances in the needles, which activate protective functions body.

Construction of such wooden house will be able to decorate the dacha and also fit well into the interior country house or villas.

Before starting work, you need to decide With exact size Houses. Decide whether there will be such additional elements, like slides, terraces, stairs, and take this into account when drawing up the drawing.

When drawing up a drawing, take into account not only doors and windows, but also interior decoration, external decorative elements(if they are planned). When choosing sizes, remember that children grow quickly and interior decoration, as well as the size of the children's house, must take this into account.

What you should pay special attention to:

• Roof.
• Height of doorways.
• Wall surface.
• Stationarity, mobility and compactness of a playhouse for a child.
• The height of windows from floor level and their number.

If you plan to build a children's playhouse for a child preschool age– for the location of windows 700 mm from the floor level is enough. Older children in such a house will be able to look out the window while squatting, and younger children - while standing. Considering that the illumination of the room will depend on the windows in the house, there should be at least two or three of them.

When choosing the size of the doors, take into account the height of the child. Doorway it is necessary to make it no less than 400 mm higher than the child’s height. And the covering of the walls, in order to avoid injuries and abrasions, must be absolutely smooth and even. For the same reason, the roof must be made gable and not flat. Then the child will not be tempted to climb on it.

Building an orphanage: necessary materials

Make sure that the purchased product is good quality, view all certificates. Make sure there are no toxic substances in the purchased materials.

To build a wooden children's house with your own hands you will need:

The easiest option for building a wooden house with your own hands is wooden frame, covered with a block house. What is a block house? This is a planed board made from rounded logs. Products available for sale standard sizes and in a wide range.

The main advantage of using a block house – strength, that makes him ideal material for the construction of a children's playhouse in a country house or garden plot. In addition, such a product will look equally impressive in the garden and playground.

In addition to the above advantages, the block house material is environmentally friendly, and its prices are very low, for building materials such quality. And collect wooden house You can do it yourself using a screwdriver, tape measure, hacksaw and level. Subsequently, such a children's playhouse can be covered with vinyl, which will significantly improve its appearance.

Basics: building the foundation

Any construction starts with building the foundation. To do this, before starting work, mark the installation location, according to the drawing, on the territory of the playground. Let's get started:

1. With four pegs (40 cm high) and twine, we place the future location of the house.
2. In the corners of the marked area we dig holes 100 cm deep. They will be needed for support beams. We make the same holes in the locations of the pillars for installing windows and doors. To avoid unpleasant surprises, always check the drawing.
3. Before installation, all installable wooden beams must be carefully treated with anti-rotting impregnation.
4. We fill the finished holes with crushed stone to a height of 150 mm. Then a beam is installed on it.
5. The installed supports are filled with cement. At this stage, construction must be interrupted until the cement base has completely dried. This will take about a week.

Construction of floor and walls

After a few days, when the poured cement has set a little, wooden supports it is necessary to nail down the four strongest timbers. They are located at the level of the future floor of the gaming house. This is how we get a frame, with supporting bases in the corners and locations of windows and doors. Horizontally fixed beams complete the frame structure.

Let's start building walls and floors:

1. In accordance with the drawings, the resulting frame base is covered with a block house. To avoid wasting valuable time adjusting dimensions, purchase products in the store that match the dimensions of your drawing.
2. After sheathing the structure, the locations of windows and doors are cut out according to preliminary markings. Special attention Pay attention to decorating the openings: they should not have cracks or sharp corners - this can be dangerous for the child.
3. To build a floor on nailed base bars we nail additional boards. They need to be installed at the same distance from each other. As a result, you should get a strong and durable lattice.
4. Now, you need to lay out two layers of plywood on the finished base. Make sure that the top plywood overlaps the seams of the bottom ones. This arrangement of plywood makes the floor as safe as possible.

Roof construction

The roof gables should be made of the same material that was used to build the entire house. They should be triangular in shape, and in no case flat.

To create gables you will need:

The construction of the roof is almost finished, all that remains is to decide on its external covering (if you have not already done so). You can find many photos on the Internet various options roof cladding. This can be tiles, straw, ondulin, boards or polycarbonate. It all depends on your capabilities and desires.

Finishing work

The construction of a wooden house for a child with your own hands is almost finished. Left decide on the design of your creation. It can be decorated with a small pond with your child’s favorite cartoon characters. Or you can show your imagination yourself by decorating a wooden house in the Russian style folk tales. Fortunately, you can find many photos on the Internet with options for such decors.

However, whatever finishing method you choose, remember that proper wood treatment is the key to the longevity of your gaming house. In addition, without appropriate treatment, a wooden house will quickly lose its attractiveness.

The following will help you preserve the longevity of a wooden house with your own hands:

• Impregnations and varnishes that create an invisible film that repels dirt. Besides, protective film does not allow the wood to darken.
• Antiprenes will reduce the flammability of wood.

To apply wood treatments, use a roller and follow the manufacturer's instructions.

As you can see, making a children's house for a summer house with your own hands is not such a difficult mission. All you need is patience and inspiration. Create with your family and for your family, and most importantly, don’t be afraid to experiment. Take into account the child’s tastes and try to choose a calm color scheme for decoration. playground. After all, soft pastel colors have a beneficial effect on the child’s psyche, harmonizing it and activating creative processes.

Remember that the main requirement of a children's building is safety. Therefore, the absence of sharp corners and traumatic places should be your priority when creating a fairy tale for your baby. It should be not just a fabulous place, but also the safest place for spending leisure time.

DIY children's house

In stores you can see a large number of a wide variety of children's playhouses. Each of them is unique in its own way. This article will help you decide whether your child needs it or not, and how not to make a mistake with the choice.

Advantages

Playhouses are a place where a child creates his own world, his own fairy tale, his own personal space. Modern parents don’t need to talk about the importance of creating such a space for a child. It creates everything the necessary conditions for the formation of independence and independence of the baby. This is the kingdom of the child, where he imitates the behavior of his parents in a playful way. Often, watching such games, you can tell a lot about his family.

IN role playing games the child copies the behavior of his loved ones, learns to interact with others, accept independent decisions. By watching a child play in his world, sensitive adults will be able to direct their child’s thoughts and energy in the right direction.

Scientists have proven that if a child has his own personal space, he will have a sense of responsibility for it. Children try to look after it, keep it clean and tidy. In the future, when the child grows up, this sense of responsibility will be more developed in him than in that child who did not have his own personal corner, and his parents did everything for him. With the help of a playhouse, you can create this world for your child, even if you live in a small apartment. Parents who want to support their child in his quest for independence should think about such a purchase.

Watch a video that looks at the range of children's playhouses in the store:

From what age can it be used?

These toys are designed for different age categories of children. Your baby will definitely love playing in the bright, colorful playhouse as he learns to crawl and walk confidently. There are models on sale designed for children from 1 year to 5 years. Large houses are suitable for older children.

Selection of material depending on operating conditions

Depending on the operating conditions, there are two types of children's playhouses:

• for installation at home;
• for outdoor installation.

As a rule, indoor houses are more compact in size. If there is not so much space in the apartment, and the child really wants a house, you can think about purchasing a model with only two adjacent walls. Such a house will fence off one of the corners in the room, creating the child’s personal space.

Large models are used for outdoor installation; most often they are made of plastic and wood. These houses differ in their color scheme, functionality, style and decor.

To the apartment

When choosing a playhouse for an apartment, you should pay attention to models from:

• impact-resistant plastic;
• wood;
• PVC materials For inflatable structures;
• fabrics;
• cardboard;

IN small apartment A playhouse in the form of a tent or wigwam is best suited. Read more about this in another article.

Wooden and plastic playhouses intended for indoors do not look large and have a lightweight version. However better to choose one permanent place, it is very difficult to assemble and disassemble it constantly. The positive point is complete safety. They have no sharp corners or loose parts. But they will delight their little owners with a real roof and windows.

The smallest plastic models occupy about 1.2 sq.m. and a height of 110 cm. There are also large two-story options. Plastic playhouses are easy to use and very easy to clean.

Watch the video showing the process of assembling a children's playhouse for an apartment:

Inflatable models are mainly intended for small children. Their convenience is that they are easy to fold and put away if necessary. While playing, you don’t have to worry that your child will be cold on the floor. They will delight kids with their “swaying” surface.

To fabric houses take the tents to wire frame. They are easy to unfold and assemble; even a child can handle it. They take up very little space and are very light. The child can easily independently move the house to where he needs it. The downside is their instability. While playing, a child can easily turn over such a house, so you should not leave the child unattended.

Excellent choice for those who find plastic or wooden models too large and expensive, and inflatable and fabric models too fragile, houses made of cardboard. They are very easy to assemble. You can decorate such a house together with your child using brushes and paints. For higher structural strength, laminated cardboard should be used. You can cut out windows in it and complement them with curtains, furniture and toys. Cardboard houses can be various forms- these are rockets, huts, cars, village houses.

For the street - to a private house or country house

Outdoor playhouses are made of strong, wear-resistant materials. Such materials include plastic and wood. These materials withstand temperature changes well. They can stand in the yard all year round.

Most plastic models can withstand temperatures down to -18°C, but it is still better to clarify this point when purchasing.

See the following video for the process of assembling the model for the dacha.

Wooden and plastic playhouses will delight you with their brightness and colorfulness for a long time. The paints used in production are absolutely safe and withstand all negative influences environment for a long time. For wooden playhouses, you will have to choose the paint yourself. It will have to be repainted periodically.

Houses designed for street use, often look like copies of real residential buildings, only in a smaller form. It can be summer kitchens, houses with a veranda, two-story models, village huts. They have windows, shutters, doors. To give home comfort You can use curtains, furniture, dishes, toys inside.

It is better to install children's houses in the shade so that in the hot summer the children do not overheat in it. Slides, ladders, and ropes are often attached to the structure, which makes children’s play even more varied and fun.

Wooden models are usually higher in price than plastic ones. However, the natural wood used in production makes them environmentally friendly and gives them a special natural charm. These houses are well ventilated, the air will never stagnate in them.

Additional equipment

You can purchase additional equipment - slides, swings, tunnels and balls. All this will give your baby even more scope for the development of imagination.

With tunnel

Play tunnels are a great place for children to play. He will be able to crawl, hide and visit in it if this tunnel connects two children's houses. Play tunnels can come in a wide variety of shapes. It could be a crossroads, a caterpillar, or a steam locomotive. Tunnels contribute physical development child, develop flexibility, dexterity, dexterity, strengthen muscles. This is an invaluable contribution to the baby's health.

Tunnels can be purchased either together with the house or separately. They are not only suitable for one child's play. Together with his friends, the baby will play in it for a long time and enthusiastically.

With balls

Balls are often included with a house equipped with various play equipment. With the help of balls you can make a “dry pool”, games in which are very beneficial for health. You can use these balls for development and learning. The child will be able to learn basic colors; the balls can be used when teaching the baby to count. Will contribute to the development of a child’s accuracy and dexterity fun game with throwing balls into a basket or some target.

Bed with plywood playhouse

Every child who has already grown out of a crib with rods will be very happy if parents purchase a bed with a playhouse as a replacement. Such beds can have houses on the ground floor, and sleeping area on the second. It could be bunk bed, made in this form. In it, a child under six years old will be securely held by high sides, which can then be removed. Having shown their imagination, parents can equip such a bed with curtains, add fabric walls with cut-out windows.

When choosing such a bed, be sure to pay attention to quality. It is necessary that it does not have sharp corners or rough surfaces that a child could land a splinter on.

Check to see if there is a pungent chemical odor coming from the bed. Often, beds from a cheap price category can smell unpleasant and be made of low-quality plywood. The health and safety of the child is most important in this case.

Design Features

When choosing a children's playhouse, it is necessary to take into account the interests of the baby, how he wants to see it. In terms of its design, it should be pleasant and original, and fit harmoniously into the space around it. Eat universal models, which are suitable for both boys and girls. There are various accessories on sale with which you can give your child's house a finished look.

For boys

When choosing a house for a boy, you should listen to his wishes. Boys might like models in the form of a pirate ship or a medieval fortress, where he can feel like a real knight. Or maybe the baby will want a fairy-tale wizard's house. Your son may like models with a garage and a gas station. For boys, houses are suitable, to which various gymnastic equipment, ladders and ropes are attached.

For girls

The girl will be inclined to choose a house in soft lilac or pink color scheme. She may want a model in the form of a fairy-tale castle, carriage, berry or flower, or a fairy's house. Also suitable for girls are kitchens, schools, shops or hospitals, where she can play out a lot of role-playing games.

For a review of the Hello Kitty children's inflatable playhouse, watch the following video.

When choosing a playhouse for your child, you need to consider several factors:

• you need to determine exactly where it will be located, after that, decide on the size;
• The age of the child is very important. For a young child, inflatable models or tent houses are more suitable. If the child is over three years old, then your choice is more varied.
• You should pay attention to safe operation. There should be no sharp corners in the house. The paint it is painted with must be safe for children. There should be no foreign chemical odors from it. The life and health of your child depends on this.
• If you plan to often take the house with you on vacation, then you need to choose one that folds and unfolds easily and does not take up much space.
• gender and interests of the child;
• additional equipment.

From the point of view of psychologists, every person and especially children need their own territory. It’s not for nothing that they have a craving for building huts, huts, bases and other buildings from any suitable or not so suitable materials. If you have your own yard or your child spends a lot of time at the dacha, build him a children’s house. The easiest way is by frame technology. Examples of the construction of wooden playhouses for summer cottages in photo reports.

Playhouse for a summer cottage with a sandbox below

We bring the brought timber 100*100 mm until smooth. You can use a plane, or you can use a drill with sandpaper attached. First with large grains, then with small ones. Afterwards we treat it against rotting protective composition, we paint. While the pillars are drying, we drill holes (our diameter is 23 cm, depth 60 cm). We fill them with crushed stone at the bottom near a shovel. We put up the pillars, set them vertically, fill them with crushed stone, compact them, and concrete them.

We cut the exposed pillars all to the same level. We fix the same 100*100 mm beam on top. It is also carefully processed so that there are no splinters. We connect it into half a tree: at the ends we cut out recesses half the thickness of the timber. For a 100*100 mm beam, cutouts are 50 mm deep and 100-100 mm in area: so that the same sawn edge of the other beam lies flat.

We fix top beam. Three have been collected, the fourth is still lying around.

We fasten it securely: 2 long nails (200 mm) on top, corners on the sides with self-tapping screws.

We attach an additional beam along the long side. Under it in the middle - above the stand - we cut a notch, also half the thickness of the beam - 50 mm. No more preventing wood from splitting. We cut down the timber at the ends in the same way as those that go along the perimeter: half a tree. It fits into the prepared gash.

A children's house must have a solid margin of safety. Therefore, we play it safe in every connection. To give the structure stability under lateral loads, we will install jibs. We cut them from 50*50 mm timber, sawing the ends at 45°.

We put it at a standstill, squeezing well.

After installing the jib, we lay the board. This will be the floor of the house.

Without an assistant - no way

We cut the flooring from the boards. It is more convenient to work with a jigsaw, but you can also use a hacksaw.

On the finished flooring we assemble the frame of a children's playhouse. We use timber 50*50 mm. We position the beams strictly vertically, first fasten them with nails - two on both sides, then reinforce them with corners on self-tapping screws (also on both sides).

We increase the rigidity of the structure by installing jibs. Then we nail the second floor trim. We simply nail these beams between the pillars. They must be sawed off with great precision so that the building does not warp. We strengthen the joints with corners, then install the jibs.

We do not nail the jib in the place where the entrance will be.

They covered it with boards left over from the packaging of the equipment. You can use it from pallets, buy an inch board (12-13 mm thick), cover it with clapboard or imitation timber, logs, siding.

When the sheathing is almost finished, we begin to assemble the rafter system. It's easier, of course, to do pitched roof— make one wall higher and no problems. But the gable one looks better, although it is more difficult to execute.

For rafter system We put two boards on an edge, connect them at the top, sawing off the corners. The ascent depends on the desire and amount of snow. If there is a lot of snow, raise your skate higher. If not, maybe about a meter or less. We knock it down with nails, then we strengthen the connection with overhead plates.

When building houses, they place either a metal plate or a piece of board here. We decided to use a board.

Using the finished sample, we mark the other rafters. Cut it out, knock it into two rafter legs at an angle (all should be the same as a carbon copy). Having installed it on the top of the house, we check the verticality. Then we nail it with two nails on both sides and place the corners.

Now the sheathing boards are laid on the rafters. Roofing material there will be ondulin. We lay the board 11*100 mm in increments of 30 cm.

Based on the thickness of the board (11 mm), we use self-tapping screws 25 mm long to fasten the ondulin (so that they fit well into the board. We put rubber gaskets under the caps to prevent leakage.

Railings made of treated, sanded boards. Screwed onto powerful 90 mm self-tapping screws. Two for the bottom beam - one for the sheathing board.

Railings are installed on the “veranda” of the house

At the top, the railings are connected by a 30*30 mm beam. Then a board will be nailed to it - a handrail.

Railings ready for painting

It was decided to put a sandbox downstairs. It is not difficult to assemble: eight boards on the walls, connected at the corners using bars, with a side board nailed on top. Then the sandbox is painted.

Even a “non-builder” can build such a children’s house with his own hands. Especially complex work No, you can get by with a basic tool.

Several options from the same series are pictured below. Two are houses with a slide, and one is a one-story option, more suitable for girls.

One-story “open” option

How to make a children's house from OSB and plywood (frame technology)

It was decided to make a house using frame technology - the base is made of boards, the cladding is made of OSB. Dimensions in plan - 3 * 2 m, wall height 1.5 m, at the ridge 2.2 m. 50 * 100 mm boards were purchased for the frame, inch board (100 * 12 mm) for the subfloor, 9 mm OSB for the floor and external cladding, for the interior - polished plywood FSF 6 mm, foam for insulation 100 mm thick.

Preparatory work - assembling panels for the children's house - was carried out in the garage: it was still cold. Later, as it gets warmer, the house will move to the dacha, to a place of permanent residence.

The first stage is the manufacture of the floor frame. We knock down a rectangle with sides 3 * 2 m, nail the transverse boards (floor joists) in increments of 50 cm.

The floor will be insulated with foam plastic. Children love to sit on the floor, so we insulate them well - with 100 mm foam plastic. We stuff thin strips underneath it from the bottom so that it doesn’t fall through. Insert foam. The gaps can be filled with polyurethane foam.

It's good that the building is small. We put it on its side and hem it with an inch board at the bottom. This will be the subfloor. After turning it over, we sew up OSB.

Later, when the house was taken out to the country, a mistake was discovered OSB installation. They nailed him close. On humid air the material was swollen and the sheets were buckling here and there. Therefore, during installation sheet material leave a gap of 8-10 mm.

Next, we assemble the wall frame. We install the racks in 1-meter increments, and double them under windows and doors. Since the top will be filled with OSB on one side and plywood on the other, the structure will be rigid. We don’t install jib beams. They are needed if the children's house will be upholstered with clapboard or other slatted material.

Assembling the wall frame

The work has been moved to the dacha. Three old logs were used as the foundation. They are hewn and the tops are leveled. The logs are leveled, a board is nailed onto them, on which the platform will be installed. The width of the house is 2 meters, and the logs are 3 meters long. We will decorate the remaining part as a terrace or porch.

The platform was installed. It is attached to the logs big heels, which connect the log and the platform. We began to lay out the frame of the walls. They must be placed exactly vertically. To secure it, temporary cuts were used - they were nailed down with boards on the sides.

Fixed externally (connecting brackets are visible in this photo)

Along the way, having aligned and checked whether the wall is level, we nail it to the platform with long nails. The length of the nail is such that it at least reaches the middle of the frame board.

Then the fittings begin: you need to correctly saw out the corners for the rafters so that they lie evenly on the boards. First, we cut roughly, gradually ensuring that there are no gaps.

Trying to “create” a rafter leg

When the shape of the cuts is clear, we transfer it to other boards using a sharp pencil. We cut everything evenly (with a jigsaw, if you have one or hand saw). Then we nail all the boards to the frame. We fill transverse boards between the rafters - the ondulin will rest on them. It turns out to be such a house.

After the construction of the rafter system, only the sheathing remains - inside and outside. We fill the outside with OSB. We cut it so that the joints fall on the racks. We nail it, you can use wood screws. For whom is it more convenient?

The insulation of the house inside is mineral (basalt wool)

Everything is nailed on top with plywood. That's all. The job is done - paint it and you can put it into operation)))

Using the same technology you can build a tree house. It will be necessary to secure the platform, but everything else is very similar.

Drawings and diagrams

Each homemade children's house differs in size. Based on how many “inhabitants” are planned in it. If the child plays alone, then 1.5 * 1.5 m is more than enough. If there are two children, they are already needed big sizes. At least 2*2 m. Decide for yourself on height too. But it’s better not to do less than 1.5 m.

House made of boards and plywood with a slide roof