Modern technologies for building houses from laminated veneer lumber. Choosing material for building a house. Step-by-step instructions for building a floor

The use of laminated veneer lumber in construction makes it possible to build not only temporary housing, but also full-fledged houses. Buildings made from such material are highly durable and absolutely safe for health.

After all, laminated veneer lumber is a natural material that meets all modern environmental requirements. To build a house, you do not need heavy equipment, since assembly is quite easy and quick. Wherein appearance The building turns out attractive. That is why the technology of building houses from laminated veneer lumber has become so often used in the construction of comfortable country and country houses.

Such buildings are also attractive due to their relative cheapness. But the house has high thermal parameters and sufficient durability. To obtain quality housing made of laminated veneer lumber, you just need to follow the technology and stages of construction.

For this you will need:

• ladder;
• ladder;
• tools;
• material for electrical work;
• pipes for communications;
• wood for sheathing;
• roofing material;
• waterproofing material;
• insulation;
• foundation material;
• fasteners;
• laminated veneer lumber.

House project

Need to consider different variants houses made of laminated veneer lumber. Worth choosing finished project, taking into account your capabilities and wishes as much as possible. Houses made of laminated veneer lumber are built and produced by the Dom-Stroy company, so there will be plenty to choose from. And you can assemble the house yourself. You first need to prepare the site, level and mark the boundaries of the house.

The house design must indicate everything architectural features houses: type of roof, type of foundations, waterproofing materials, insulation and others. It is also necessary to select the thickness of the timber, depending on the frequency of residence: permanently or seasonally. When ordering a finished project, you receive every detail exact dimensions, it will be numbered and treated with a special compound.

Foundation

A house made of laminated veneer lumber weighs little, so you can use types of foundations with shallow depth: bored, pile and strip. When choosing, you should consider the level groundwater, soil type and climatic conditions.

If the area is sloping or peaty, it will do pile foundation. You can carry out waterproofing that will protect the house from moisture.

Box

The assembly takes place from specially fitted elements. For a one-story building interior partitions can be assembled from the same timber from which the walls are made. It is imperative to insulate the grooves and joints. When laying walls, you need to install beams basement floor and lay the floors. First, you should lay the subfloor boards, and then the insulation and vapor barrier. When the basic assembly work has been completed, the clean floor can be laid.

Roof

When required height reached, you can close the box ceiling beams, install the rafters. It is necessary to lay on the rafters and ceiling mineral wool to protect the attic space from the cold. The roof is covered by a truss structure.

Engineering systems

To ensure comfort, you need to install communications: sewerage, heating, water supply. To do this, you should use polyethylene or metal-polymer pipes, which will ensure reliable use. Wires in ceilings should be laid in corrugated metal sleeves, along the ceiling and walls - in plastic channels.

Final works

Having laid a clean floor, you can install windows and entrance doors. Concerning interior doors, then they close last so as not to damage the finish.

The resulting structure does not require external or internal finishing. However, if there is a desire, this can be done. The surfaces should be coated with colorless varnish, which will emphasize the texture of the wood. Once the assembly is complete, the wood porch can be installed.

Since ancient times, wood has been the most popular building material. It was used in almost any area where something needed to be built. But in some cases, for special architectural ideas, ordinary logs cannot be used. We have to use other materials. After the advent of laminated veneer lumber, it became possible to build complex buildings entirely from wood.

Appearance of the end section of laminated veneer lumber with a description of its advantages.

With such construction, it is required that the technology of building a house from laminated veneer lumber be carried out very carefully and carefully. When a house is built, the best and highest quality materials are selected for it.

Become preferred natural materials that meet basic requirements. They must be durable, reliable and consistent with the external design. The recently developed technology for building a house from laminated veneer lumber has revived the lost interest in building houses from wood. Indeed, recently houses built from brick have become very fashionable.

The project and its features

Every construction always begins with design. The construction of houses from laminated veneer lumber is no exception. A special tool will allow you to independently develop and design a house made of laminated veneer lumber. computer program. Of course, such work will require certain knowledge. When developing documentation and drawings of a house made of laminated veneer lumber, you need to prepare:

Foundation for a house made of laminated veneer lumber.

1. Foundation plan. A drawing of the foundation is being developed, which indicates its type, the depth of the trench, the materials used, and so on.
2. Floor beam plan. The type of support beams will depend on the type of foundation chosen. For this, a special drawing is made, which will become the basis for future floor construction.
3. Floor plan of the building. Such documentation is considered the most labor-intensive when developing a plan. The drawing must show the places where there will be: windows, doors, walls, internal partitions.
4. For each part, all overall dimensions must be indicated. In addition, it is desirable that the completed drawing shows the location of the fireplace and all utility lines.
5. Screeding. During construction, the drawing shows a section of the house wall. In accordance with these drawings, the preparation of laminated veneer lumber is carried out. This process is the most labor-intensive and needs to be addressed Special attention. I must say that this is the most difficult design point. When the screed technology is being developed, the walls of the future building are drawn, an axial section is made, all the details of the wall and its connection with other walls are shown. In the final form of laminated veneer lumber houses, a drawing of each wall detail is made. All major dimensions, hole diameters, cutouts and cups are shown.
6. Numbering. Each project gives all elements an individual number, with which it can be easily identified in the future.

Advantages of a house made of laminated veneer lumber

Positive qualities are ensured due to the manufacturing technology of laminated veneer lumber. It is first cleaned, all knots are removed, then sorted according to texture and color shades. This technology allows you to get a great appearance:

Construction of house walls from laminated veneer lumber.

1. Constancy overall dimensions. Glued wood is able to maintain its dimensions. It doesn't change shape after for long years operation. Houses made of laminated veneer lumber do not shrink, since the timber does not twist and does not begin to bend over time. The reason for these properties is the absence of internal stresses and perfectly dried raw materials.
2. Strength. Solid wood is much inferior to laminated wood in this regard. Its strength is half that of laminated veneer lumber. Therefore, such timber began to be used in the latest wooden house construction. The characteristics of houses made of laminated veneer lumber meet the requirements of construction technology.

Thermal properties of a house made of laminated veneer lumber

It has long been known that any wooden house is warm. Excellent thermal performance makes it possible to save on the purchase of expensive heating equipment and fuel. To heat houses made of laminated veneer lumber, tens of times less fuel is required when compared to a house built of brick.

Construction of a wall in a house made of laminated veneer lumber.

The time it takes to construct such houses is much less than the time required to construct the same building if untreated wood is used. This became possible due to the fact that laminated veneer lumber is manufactured at the factory to precise dimensions and good drying. The structure of the house is assembled very quickly, installation is not particularly difficult. After laying the foundation, assembly of the house lasts approximately 5 weeks.

A lot of space is allocated to insulating the house. In ordinary wooden houses There are seams that are very difficult to seal. With houses made of laminated veneer lumber everything is much simpler. During assembly, the beams are precisely adjusted to size, so there is no need to install additional insulation to close the grooves. It should be noted that the design of such beams protects its middle from water. Such a house is never affected by rot.

Individual logs are very difficult to finish even with excellent fit. The walls still remain uneven, and the finishing process becomes much more complicated. Walls made of laminated veneer lumber are very smooth, the surface is completely smooth. This wall looks like it is monolithic. There is no need to finish these walls from the outside.

The nuances of construction from laminated veneer lumber

Any home starts with a foundation. For laminated veneer lumber, a strip version is used. Such a foundation must have a well-ventilated space (directly under the house). Therefore, special vents are provided in this foundation, thanks to which the subfloor is ventilated. For every detail strip foundation There should be two air vents.

At the first stage, the dimensions of the strip foundation are determined.

Beam fastening diagram.

A one-story house made of laminated veneer lumber usually has a foundation poured to a depth of 800 mm. Its width reaches 500 mm. 15 cm of the dug trench is filled with sand, which must be compacted.

After the foundation work is completed, all construction is carried out according to the classical system:

• a reinforcement frame is made;
• formwork is installed;
• Concrete is being poured.

The formwork should rise above the ground level by approximately 300 mm. Before pouring concrete, it is necessary to prepare the ventilation holes in advance. For this purpose, mortgages are inserted into the required places and subsequently knocked out. You can, of course, do without installing mortgages. It is possible to make holes using a hammer drill. However, such work is quite complex and time-consuming. They wait exactly a month for the foundation to dry.

The second step of construction means mounting the crowns. Before this operation the foundation is covered waterproofing material. First, the entire surface is coated bitumen mastic, and then several layers of roofing material are laid.

Schemes for marking joints of beam corners.

A crown is installed on top of the insulation, which consists of beams laid directly on the foundation. First, the bottom trim is done. Floor joists are laid along with it, after which the first crown is installed. This structural element laid along partitions: it is installed together with load-bearing walls.

After completing the work with the crown, the construction of the walls begins. In this case, installing a house made of laminated veneer lumber is similar to assembling a construction set. The beams are fastened with spikes, which are driven into pre-prepared holes. In this work, much attention is paid to when the corners are bandaged.

Final moments of construction

Connecting timber along the length with a straight rim lock and an oblique rim lock.

One of the penultimate steps in the construction of houses made of laminated veneer lumber is the installation of the roof. Its installation is similar in complexity to the construction of walls. As mentioned above, such houses are built according to a special design in a factory. They are brought to the construction site in the form of finished parts that only need to be assembled.

One of these parts is the roof. In this regard, its installation only requires correct fastening necessary elements in specific places. Basically, such houses have a roof made of colored flexible tiles. It must be said that only the roofing material in this case is not made of wood.

The final operation of constructing a house from laminated veneer lumber requires only finishing the surface of the floor and walls. The most important work during this technological operation is the manufacture of the floor. This is usually a multi-layer structure with moisture-resistant plywood placed underneath. A special one is mounted on top of it decorative coating. Both of these layers are separated by a reinforced screed, and sometimes a durable boardwalk is laid.

The surfaces of the walls inside the house are most often made of wood, but decorating with other types of materials will also look good.

Modern technologies have penetrated even into such a seemingly immutable sphere as the construction wooden houses. Many now prefer, instead of stone and brick buildings, which until recently were in first place in popularity, to build a house from laminated veneer lumber and its analogues.

Before you do right choice, every owner of the future house in which he will have to live must study what is good about this or that material. Why exactly laminated veneer lumber, and not, for example, solid, or ordinary logs? The advantages are as follows:

• A house made from laminated veneer lumber is built much faster than from any other material.
• Due to the fact that shrinkage is practically absent, carry out Finishing work and you can even move in almost immediately after the completion of construction work.
• No unique connection method required additional work for insulation and sealing, moreover, such houses are very economical in terms of heating costs.
• The technology used to produce laminated timber provides several degrees of protection against possible troubles. It includes treating the material with an antiseptic, antibacterial agents and fire retardants. This triple protection significantly reduces the risk of fire, damage by fungi and insects, and also ensures the environmental friendliness of the structure.
• Does not require special work exterior decoration, only periodic treatment with protective varnishes.
• Durability.
• Simplicity and compatibility provide the opportunity to implement projects of any degree of complexity.

There is hardly any other material that has so many positive properties

Flaws

It would be unfair to omit this section. However, it will be much shorter.

• The first thing you have to think about at the design stage is the price. Glued laminated timber is somewhat more expensive than profiled timber.
• The second is the need for periodic processing wooden structures, especially with outside, in order to extend their service life.

Let's finish here. The remaining shortcomings are not so significant and can be easily solved as they arise to focus attention on them.

How to build a house from laminated timber in 9 steps

During construction, there is a risk of making mistakes, which will then be very difficult, and sometimes impossible, to correct. To avoid this, you need to think through everything down to the smallest detail, starting with documentation and approval in the necessary authorities, and ending with a housewarming party, cheerful and crowded. All this can be done in just 9 steps - the path is not too long, but requires attention and hard work, especially if you decide to build a house from laminated veneer lumber with your own hands.

Step 1: Project

The initial stage, which is one of the most important. It will not only help you do everything correctly and efficiently during the construction process, but also bypass all bureaucratic obstacles. It is much easier to obtain almost all permits at the design level than after the building has already been erected.

However, not everyone has the talent of an architect. What to do in this case? There are four options at once:

• The Internet is full of all kinds of projects for all occasions and you can download them absolutely free. But there are several pitfalls here. And the biggest of them are the discrepancy between the foundation and the type of soil on your site and the difficulty of connecting communications.
• The second method smoothly follows from the first method. Download the project from the Internet, and then modify it in accordance with your conditions.
• The best option is to order the development of a project for a house made of laminated veneer lumber from a construction company, which will then supply you with building materials. Their specialists will offer you a variety of ready-made projects to choose from, which they will be happy to make changes to according to your wishes. This is somewhat more expensive, but you will be sure that all the nuances are taken into account.
• If you have any special wishes for your future home, you can order an individual project developed by specialists from the very beginning, but this will cost about 30% of the entire construction estimate.

The option of involving a construction company is also good because they legal services will help settle all issues with the BTI, administration and other bureaucrats.

Step 2: Foundation

Depending on the type of soil on the site where you are going to build your house, and on the design of the house itself, taking into account its area, the location of the rooms and how many floors it will have, a certain type of foundation is poured. We also take into account the fact that laminated veneer lumber is much lighter than some other types building materials, which means that the foundation being poured is not so powerful, which leads to significant savings.

Another positive factor: for the construction of a brick or cinder block house The foundation is usually poured in the fall, allowed to settle until spring, and only six months later they begin to build the house itself. It is possible and even necessary to work with laminated timber in winter.

Step 3: First crown

Laying the first crown is one of the most crucial moments in building a house. Here are step-by-step instructions on how to do this correctly:

• The beam for the first crown should be made of coniferous species tree.
• It is recommended to apply at least three layers of antiseptic to it.
• The first crown is laid only on a perfectly level foundation.
• It is necessary to lay waterproofing material under the timber itself.
• The timber is secured with anchors, pins or metal crutches.

Step 4: Subfloor Joists

At the same time as the first crown, the subfloor logs are installed. If the area of ​​the house is not very large, the logs are fixed to the timber using metal corners. If the area under the joists is large, additional supports should be formed.

Step 5: Assembling the Box

If construction company, in which you first ordered a project, and then a set of laminated veneer lumber, immediately sawn and shaped according to required sizes, fulfilled all the conditions and wishes, making the box yourself does not present any difficulties. Each element is already numbered in accordance with its place in the log house, all that remains is to carefully place it in place, not forgetting to place thermal insulation material, if it is provided for by the configuration of the connecting profile.

If you bought an ordinary laminated veneer lumber and are going to do all the work yourself, you will have to choose methods of longitudinal connections (in half a tree, in a paw, on a root tenon), corner connections(on the main tenon, on the insert tenon, in the frying pan, in the bowl). Learn how to cut connecting grooves and think about how to fasten the timber together (with self-tapping screws, dowels).

Installation of timber floors also requires special calculations. If there is an ordinary attic or unused attic above the residential floor, the load on them will be insignificant and the beams can be fastened to a metal support.

If the house is two-story, the floor beams should be installed directly into the timber. The distance from the beams to the heating pipe is also taken into account.

Step 6: Roof

Due to the fact that shrinkage in a house made of laminated veneer lumber is minimal and practically does not play any negative role, rafters can begin to be installed almost immediately after the construction of the box. And then cover the roof with the selected roofing material.

Step 7: Individual Elements

Windows and doors. This is another one positive attribute houses made of laminated veneer lumber. Pipe for installing door and window openings not required. The casing has more of an aesthetic than a functional meaning.

Final installation and connection of communications. This includes sewerage, water supply and heating.

Installation vertical supports, if they are provided for in the project. Again, due to the slight shrinkage, no difficulties arise here either, but experts still advise using sliding fasteners for them, with the help of which you can subsequently adjust the height of the supports.

Step 8: Interior finishing

Interior decoration is absolutely optional. Glued laminated timber in itself it looks quite aesthetically pleasing, but no one forbids sticking wallpaper or attaching drywall to it. There are only two factors to consider. Interior finishing is a more precise matter, and therefore even such a small shrinkage as in a house made of laminated veneer lumber can have an effect. This is the first. Second: you should wait at least 5-6 months before applying plaster or gluing decorative tiles.

Step 9: Exterior Finishing

If a house made of laminated veneer lumber does not need interior decoration, then decorating it from the outside is somehow strange. It already looks stylish, rich and presentable. However, some scope of work is still necessary and it comes down not only to processing by special means, extending service life. So:

• Caulk the seams (optional).
• Sealing cracks (only if they appear)
• Insulation of door and window openings (an urgent need).

As you can see, the amount of work depends primarily on how well you built your house.

What is the price

It is impossible to name a specific figure in response to this question - there are too many factors that influence it. But it is quite possible to list the factors themselves:

• Dimensions of the building.
• Foundation type.
• Complexity of the project.
• Section of timber.
• Number of floors.
• The presence of a balcony, veranda, attic.
• Roof type and configuration.
• Number and complexity of communications.
• Cost of documents.
• Transport and delivery costs.
• The price of the material itself.

As you noticed, this list does not include costs for construction works and payment construction team. This is because there are more and more self-built houses from laminated veneer lumber. We are confident that you can do it on your own if you have the desire, hard work and the required amount of time.

At the design stage own home It is important to choose the wall material. The appearance of the building, its weight (which affects the requirements for foundations), and the final cost of construction depend on which external enclosing structures will be used. Increasingly, when building their own homes, people give preference to creating wooden cottages, one of the options of which is houses made of laminated veneer lumber.

Features of the material

This technology makes it possible to produce wooden elements larger sections and lengths than is possible with solid material. At the same time, the overall strength of the structure increases. The production of material occurs in the following sequence:

• drying softwood boards in steam chambers to a standard humidity of 8-12%;
• sorting the received material, cutting out defects;
• giving the boards a strict geometric shape by planing on four sides;
• gluing elements together under a high-power hydraulic press;
• cutting the profile into pieces of the required size;
• drilling holes in parts for dowels.

Compared to classic edged timber glued material has a number of features:

• length up to 18 m (versus 6 m);
• minimal deformation and shrinkage (1-2% versus 9-10%);
• possibility of manufacturing elements of large cross-section (thickness up to 50 cm, height up to 90 cm);
• high strength (the frame is noticeably more rigid);
• increased resistance to negative impacts from the outside environment(deep cracks do not form);
• absence of drafts between the crowns due to the profiled section.

This technology makes it possible to obtain a material with unique characteristics, but, unfortunately, it is quite expensive. It's because of the cost modern houses made of glued material are the choice of people with fairly high financial capabilities.

Advantages and disadvantages

There is a strong consensus in the construction market regarding the advantages of houses made of laminated veneer lumber:

1. Possibility of operation immediately after assembly. This is ensured due to the fact that the shrinkage of the house is minimal and does not exceed 0.5%. When using ordinary timber or logs, before finishing, you must wait at least 1, and preferably 2 years, so that the walls dry out and shrink.
2. High thermal insulation characteristics. But here it is important to note that such thermal conductivity can also be provided ordinary timber or log, which cost much less.
3. Attractive appearance. The surface of the elements is perfectly smooth, which allows you to avoid additional finishing of the house from the inside or outside. In addition, thanks to the unique properties of the material, the attractiveness will last for a long time. The service life is increased due to resistance to such troubles as mold, rot or mildew.
4. Low flammability. The main problem of wooden cottages is their instability to fire. A special production technology solves this issue. At the manufacturing stage, all elements are treated with fire retardants - substances that increase the fire resistance limit. In addition, when producing profiled material, cracks and voids are eliminated, and it acquires greater density. Such a monolithic structure resists fire better. Even in the event of a fire, the walls will continue to perform a load-bearing function and will not pose a threat of destruction during the time required for safe evacuation of people.
5. Opportunity to implement bold architectural solutions. Creation of large spans and complex geometric shapes. Such advantages are justified by the high strength of the material and simplicity machining. The technology allows us to produce not only standard products, but also bent-laminated beams.

The advantages are quite significant, so even when constructing houses from other materials, sometimes such elements are included in the design.

Also, houses made of laminated veneer lumber also have disadvantages. They need to be known at the design stage in order to avoid serious problems during construction and operation. The disadvantages can be identified as follows:

1. Using synthetic compounds for gluing profiled timber. There are three options for production: polyurethane, melamine and isoacitate adhesives. The last group will be the most environmentally friendly option. In Europe and Russia, the technology of using the first two is most widespread.
2. About melanin glue. It is important to know that it contains formaldehyde, a toxic substance that can lead to or worsen bronchial asthma. Isoacitates can also cause this disease. Despite the fact that the service life of the house increases and its strength characteristics increase, if there is a predisposition to this kind of disease, you should abandon the idea of ​​​​using glued profiled material for construction, since this is dangerous to health.
3. Possibility of small cracks. Manufacturers prefer to remain silent about this. Although the shrinkage is minimal (1-2%), it is not zero. Therefore, if you plan to carry out additional finishing inside (for example, drywall on the walls or ceiling), then in the first year after construction you will have to wait.
4. Increased cost. The estimate for a house made of laminated veneer lumber will be such that with this money it would be possible to build brick house approximately the same size. Although which is better - a wooden or stone house - is rather a philosophical question, personal beliefs and preferences play a big role here.
5. If the beam is thin, additional insulation is necessary. Even thanks to low thermal conductivity, in harsh northern winters, houses made of profiled timber are not able to provide complete protection from the cold. These disadvantages can be eliminated; you just need to use an effective mineral wool insulation. But it involves increased costs and labor intensity.

The use of polystyrene foam for additional thermal insulation is not recommended, since its service life and strength leave much to be desired. In addition, polystyrene foam negates the ability wooden house"breathe".

If not everyone pays attention to the composition of the adhesive or the heat-shielding characteristics, then even a person far from construction will notice an increase in cost (sometimes several times). The service life of the building and its energy efficiency are not high enough to talk about cost recovery.

Owner reviews

Glued laminated timber has been used in Russia for more than 15 years. During this period, technology has undergone many changes towards improving consumer characteristics and adapting to continental climate conditions. Owners of houses built at least 3 years ago can objectively judge their house in general and the technology features in particular.

Actual construction time

Construction organizations claim that the construction of an average house of 150 sq.m. takes 1-1.5 months. This is partly true - assembling a standard box, which is not the first time builders have built, really does not take that much time.

But the owners of such houses report the following:

“Don't forget about building the foundation. Depending on the number of floors and geological conditions, a simple pile-screw method (installed in 3-7 days) or a more labor-intensive strip method (14-21 days, including the concrete hardening time) may suit you.”

Also, many reviews report an increase in deadlines for engineering systems:

“After the frame is erected, communications are installed, including at a minimum electrical, heating, water supply and sewerage. That's another 3-4 weeks continuous work. Installation of windows and doors, if it is not included in the main types of work - 1-2 weeks. And interior finishing, depending on the nuances of the design project, can take 2-3, and sometimes even 9 months of intensive work.”

Conclusion: according to reviews, the actual construction time is not 1-1.5 months, but at least 2-3. And taking into account finishing, it can take from 4 to 12 months.

Actual shrinkage

Manufacturers claim that due to low shrinkage and natural beauty The interior decoration of the house may not be done at all.

“In reality, slight shrinkage is still present, and in some places, after a year, small cracks appeared on the walls inside and outside, especially at the ends. For us, this is not critical, since the thermal efficiency of the house was not affected and no through cracks appeared. But the sediment remained, because we were promised a complete absence of any defects during the drying process. In addition, even laminated wood is a living material, and cracking can be accepted as a kind of noble natural patina of time.”

Thus, a slight adjustment to the geometric dimensions of the walls is still present. Therefore, this fact should not be neglected during interior decoration.

Actual fire treatment

In production, before sending a batch of timber on a flight, it is treated with special fire-prevention impregnations. During transportation and loading/unloading, the material gets dirty and its appearance deteriorates.

“We decided to sand the facade in several places to remove dirt. Consequently, unsightly whitish spots appeared, and we had to completely clean one façade and then re-coat it with fire retardant. As a result, the deadlines and figures in the estimate shifted. Don’t repeat my mistake - be present when the material is accepted and make sure that there are no such dark spots on it.”

As for fire resistance, firefighter Alexander from the specialized forum spoke about it best:

“A wooden house, no matter how you treat it and with what, remains flammable. Yes, fire retardants increase the degree of fire resistance, the duration and temperature of flammability increases, but they will not give the material the NG group (non-flammable). Therefore, if there is a fire, the treatment will give you an additional 2-3 minutes to evacuate. By the way, in stone houses the situation is no better: the fire occurs from the inside, and there are flammable finishes, furniture, curtains, etc. As a result, we have the same evacuation time as in a log house.”

Conclusion: processing is important because fire safety such a house is very close to a stone one. Carefully monitor its presence and the absence of dirty spots upon acceptance.

Design and construction

There are many offers on the market for the construction of turnkey houses. Most often, these companies produce the material themselves and perform the assembly. To build a house from laminated veneer lumber, you will need to choose a standard one or develop an individual project. Beams are manufactured according to the project, and the factory will definitely ask for their geometric dimensions and all the necessary drawings. Here it is important to have a complete project; just a sketch of the house is suitable only at the initial stage.

Ordering a ready-made project is an additional investment. For self-creation For a preliminary design, you can use specialized programs such as ArchiCAD or AutoCAD. To complete the work yourself, you will need to study the material on working with these programs. For one use, you don’t have to purchase the licensed version (the cost of which is very high), but use the demo version.

Construction is not critically different from others wooden materials. are selected in the same way as for houses. Laying crowns and ceiling elements does not cause any difficulties. The elements are fixed with dowels or bolts, holes for which are provided at the manufacturing stage.

Having carefully studied all the advantages and disadvantages, strength characteristics, service life, heat-protective abilities, you can safely make an independent, informed choice.

The main activity of our plant is the production of houses from profiled laminated timber and the sale of related lumber. Manufacturing of houses is possible both according to standard and individual projects. The development of the design documentation section (wooden structures) is carried out in the office in St. Petersburg. Ready-made houses supplied in different regions RF.

Construction is also one of the main activities of our company. It is possible to assemble a house kit in the option “ Warm contour“- it includes the foundation, assembly of walls, installation of a roof with insulation, installation of communications, heated floors, installation of doors, double-glazed windows, etc. The end result is a house completely ready for final interior finishing. The price of our houses (the house kits themselves) depends on the choice of timber section, as it is calculated by the volume of lumber in cubic meters.

You can build a house from laminated veneer lumber in a few months. You can discuss the cost and buy a house kit throughout the year. Sales are carried out at the company's head office at the address: St. Petersburg, emb. Martynova, house 6.