A bench with a back is a simple and comfortable garden furniture. Do-it-yourself garden bench: use drawings to make a wooden bench Prepare a clay solution

garden bench- This is not just ordinary furniture designed for relaxation. With this furniture you can decorate personal plot, create entire compositions that will fit perfectly into the surrounding space of the garden or yard. It’s not difficult to make a garden bench with your own hands; the main thing is to choose the design of the furniture, its location and the material from which it will be made.

Materials for a garden bench

Plastic

Light plastic furniture has many advantages: it is easy to move from place to place, easy to care for, and has an affordable price range. You can choose any color option, which fits perfectly into the landscape design. Disadvantages of plastic furniture: it quickly becomes scratched, fades in the sun, looks cheap.

Tree

This material is ideal for creating furniture: it absorbs heat, looks noble, and is easy to process. Any type of wood is suitable for making a bench, the main thing is that the material is sufficiently well dried and has no external defects.

Stone

This one is natural and beautiful material fits perfectly into any stylistic direction landscape design. Stone compositions look solid, noble and unusual. But, despite many advantages, a natural stone has several disadvantages. Sitting on a stone bench is not very comfortable, and it is also unsafe for health. Therefore, along with the bench you need to mandatory make warm covers or pads. Stone compositions are installed permanently; they cannot be moved from place to place.

Metal

Garden benches, made by hot or cold forging, are a real decoration for a garden or a place to relax. The designs look beautiful and stylish, especially if additional decorative elements were used. Metal is most often combined with wood, glass or other material.

Requirements that a garden bench must meet

Convenience

First of all, you need to think about the ergonomic design of relaxation furniture. It should be convenient and comfortable. It is best to make furniture with a backrest on which you can lean back and relax.

Safety

A garden bench must be strong, carefully assembled and withstand heavy loads. For these purposes, it is best to use high-quality materials and fittings.

Resistance to changes in humidity and temperature

Since the furniture is made for the garden or yard, the material must withstand all climatic changes without defects or damage.

Prices for garden benches

Garden benches

Bench design

The length of the seat and backrest will be 1500 mm. This furniture can comfortably accommodate three people at once. Seat height - 450 mm, back height - 900 mm. It is advisable to place the back at an angle of 18-20 degrees. The seat width is 400 mm.

Material and tools for making a garden bench from wood

1. Wooden boards 1500 by 150 mm, thickness 35-40 mm. Three blanks for the seat and two for the back.
2. Blanks that serve as legs and holders for the back - 900 by 150 mm, 35-40 mm thick.
3. Blanks for the front legs of the bench - 360 by 150 mm, thickness 35-40 mm.
4. Beams 40 by 40 mm will be used to strengthen the structure of the bench.
5. Self-tapping screws.
6. Electric jigsaw for cutting boards.
7. Electric planer for grinding the surface of boards and processing chamfers.
8. Screwdriver.
9. Sandpaper.
10. Varnish and primer.

Making a wooden structure

Step 1. Boards for making a bench can be purchased immediately to size; if they are not available for sale, the wood will have to be cut into blanks using a jigsaw or miter saw.

After the wood is cut to the desired length, it needs to be carefully processed. The blanks for the back and seat need to be sanded. All ends of the boards also need to be processed with an electric planer, it is advisable to give them a rounded shape.

Step 2. The long rear legs of the bench, which additionally serve as a frame for the backrest, need to be given correct angle tilt To do this, you need to apply markings to two wooden blanks having a length of 900 mm.

The first to be noted is the height of the bench - 400 mm. This section of the board does not need processing. Starting from the segment, you need to make a 20-degree cut along the entire remaining length of the board, which forms the angle of inclination of the back of the bench. The cuts on the two rear legs should be the same in both height and angle. Otherwise, the bench will be skewed.

Step 3. The legs are assembled first in the bench design. The distance between the front and rear legs is 280 mm. The legs are connected by a beam, which is cut to cover the entire width of the bench - 500 mm. It is advisable to do a double strapping - top and bottom.

Step 4. After the two sides of the bench are assembled, you can connect them together with boards intended for sitting. The boards are screwed using self-tapping screws to upper beams strapping. It is desirable that gaps of equal size remain between the wooden pieces - 1-2 cm. These gaps promote air circulation and moisture removal.

Step 5. Strengthening the bench structure. To garden furniture turned out to be stable and durable, it is desirable to strengthen its structure. For these purposes, you need to make the lower strapping along the legs using beams. Two pieces, 1500 mm long, are screwed to the front and rear legs of the bench. If there is not enough lumber, you can use one cross member, which is attached to the lower beams of the frame.

Step 6. Installation of the bench back. The bench is almost ready, left finishing touch- fastening two boards that serve as a backrest. It is recommended to attach the first board at a distance of 200 mm from the seat. The second is at a distance of 380 mm from the seat.

Step 7 Finish coating for garden furniture. To protect wood from damage environment, it is advisable to use varnish. Impregnation will protect the bench from moisture, mold, and pests.

The varnish will give the furniture a beautiful and elegant look. To give the wood shine, you need to thoroughly polish the material and varnish the workpieces several times.

Video - Detailed instructions for making a garden bench

Video - Shop in 6 minutes

Find out some interesting options on how to make it from our new article.

DIY metal garden bench

You can decorate your garden plot not only with wooden furniture. Metal benches are another way to create a cozy and comfortable place to relax. To make a metal frame, it is not necessary to master hot forging techniques.

You can use cold forging technology, in which a frame of metal blanks is welded into a single structure. Can be refined during manufacturing various elements decor, unusual inserts and additions.

Tools and materials for making a garden bench using cold forging

1. Angle grinder with discs for cutting and polishing metal.
2. with a set of electrodes.
3. Pipe bending device. This could be a mini-machine “Snail” or a metalworking vice, with which you can bend the metal according to a template. This device is needed if you plan to have a complex backrest shape with rounded edges.
4. Metal pipes square shape(30 mm by 30 mm).
5. Decorative elements of hot forging to decorate the structure.
6. Material for seat and back (wood, MDF, plywood).
7. Roulette.
8. Level.
9. Primer for metal.
10. Protective coating for wood.

Step-by-step instruction

It is quite difficult to make a complex and elaborate bench design without experience. But make it simple and robust construction can be done without difficulty.

Step 1. Develop the dimensions and dimensions of the bench. A standard-sized garden bench has a length of 1500 mm, a width of 400-500 mm, and a back height of 800-900 mm. Corner furniture shapes are the easiest to make, so for the first time it is better to try to make a simpler model with your own hands.

Step 2. Making a frame for the seat. The metal pipe needs to be cut into 4 fragments: 2 x 1500 mm and 2 x 400 mm. All details are in a rectangle. To make the seat more durable, you can weld 2 additional stiffeners into the rectangular frame.

Step 3. Making legs. The metal pipe needs to be cut into 4 identical sections of 460 mm each. These blanks need to be welded to the corners of the bench. It is recommended to weld additional stiffeners between the front and rear legs.

Step 4. Making the back. Two workpieces 440 mm long and one workpiece 1500 mm long need to be welded together. This structure is then welded to the finished part of the bench. The back should be mounted at an angle of 15-20 degrees. In this case, sitting on the bench will be comfortable.

Step 5. To make the back of the bench stronger, you can additionally strengthen its frame with stiffeners, transverse or longitudinal.

Step 6. The metal frame of the garden bench is ready. The final work is cleaning all welding seams, polishing the metal and coating the frame with a primer.

Step 7 Making a back and seat from wood. Wooden boards or beams are the most suitable material for finishing a metal bench. The wood for the back and seat must be carefully planed and polished, and the chamfers must be processed. The wood needs to be cut into blanks that can be fastened both along and across the back and seat. It all depends on the length of the material.

Step 8 Using an electric drill, you need to drill holes for installation in the metal frame of the bench wood finishing benches. To connect metal and wood, it is recommended to use bolts with rounded heads and nuts.

Step 9 After the back and seat are screwed to the metal frame, the wood needs to be covered with stain or varnish. This will protect the material from environmental influences.

The garden bench is ready. Thanks to metal pipe The inside is hollow, the furniture is not very heavy and can be moved from place to place. Well-processed metal and wood are easily tolerated high humidity and temperature changes, thanks to which a bench made with your own hands will serve for many years.

Video - Making a garden bench from a metal corner

On summer cottage I really want to have a corner where you can relax and enjoy nature. It is impossible to imagine such a place without a beautiful bench. A self-made garden bench can not only save money, but also fulfill the individual needs and ideas of everyone, because there are a lot of options and techniques for making it, and from them you can choose the one that suits you.

Step-by-step diagram for assembling a garden bench with a table

How to choose a place to install a country bench

Before you start self-production benches, you need to be very careful about where to place it. This issue is worth addressing because a bench is not only an object for the convenience of relaxation, but also a place where sufficient work will be carried out. a large number of time, and therefore the view and atmosphere must be suitable. In addition, much in its design and installation process will depend on the selected area for installing a garden bench, as well as its type.

Examples of the location of garden benches from the design side.

A bench for a summer house made of wood combined with forged wood frame. A bench made of logs with a stone base.	It will fit very harmoniously into a garden in which trees with large crowns and various fluffy shrubs grow.
Bench romantic style, openwork	A garden of young trees or a vineyard would be a good place to place it.
Miniature bench painted white	It would be ideal to be in contrast with a dense hedge of rich green color. Also good option for such a bench there will be a pond, blooming flower beds or just in a secluded corner decorated with flowers.
Retro bench made of “old” wood	It can create a very mysterious atmosphere together with old trees with curved trunks located nearby, near which flowers of different types are planted.
Bench combined with decorative items	A very popular place to place a bench is a veranda or gazebo. In this case, a do-it-yourself garden bench should be made in a similar style with existing decorative items and the veranda or gazebo itself.
Combined benches and table	This design will be good on a small spacious plot of land, which can be decorated with floral vegetation, and can also be located next to the house or under a canopy.

In addition to the options listed, you can install a bench in a place where children usually spend their leisure time, which will allow you to be close to them when they play. A place to rest will be especially well organized if there is a lone tree on the site with a spreading crown by installing a bench directly under it.

In addition, you can organize a canopy near the house, under which you can place a garden bench. It will be good place rest even in rainy weather. There is another option to simply locate a bench in the beds where crops are grown - it will be convenient for relaxing between work in the garden.

Important: It is best to choose a location so that there are no annoying objects or buildings, garages, fences, etc. in the field of view. It is worth remembering that the view should lift your spirits and promote relaxation, and not be a reminder of how much work remains to be done at the dacha.

There are a great many options and ideas for implementation that a DIY garden bench can allow you to implement. It’s quite simple to come up with a decorative composition with its participation, for example, it looks good on elevations, decorated with boulders or shrubs; a bench that harmoniously merges into a flower bed is also pleasing to the eye.

Preliminary steps

After the location of the bench has been determined, you need to start planning the future product. It is worth considering a few points:

1. Size. If the bench is typical in size and you do not want to design an individual model, you can use the data from the table.
2. Method of fastening the backrest.
3. Leg layout. This criterion can be determined based on the mobility of the product. If the bench is a stationary structure, then it should be strengthened in the ground with cement, first digging a hole in the ground of the required size.

Table of standard bench sizes.

When the drawing plan is drawn up, you can easily determine the size of each part of the bench from it, and then begin its manufacture.

It is also worth asking about the material from which the DIY garden bench will be made. Each material has its own special nuances that can be used as advantages to achieve the desired result.

Mandatory requirements for the bench

In addition to the previous nuances in the process of designing a product, it is worth taking into account a certain list of requirements that it must meet. The following must be taken into account:

1. Safety. You should not allow an unreliable design of the product, because this can bring a lot of troubles when using it. To ensure safe use, it is worth choosing only quality material, as well as fastening devices and any accessories.
2. Convenience. Undoubtedly, such an item in the garden as a garden bench should be comfortable so that nothing interferes with the relaxation process. To do this, you need to approach the project creation stage very competently and carefully and think through all the details in advance.
3. Immunity to influence external conditions . To ensure long-term preservation of appearance and service life, it is necessary to select only solid material at the assembly stage of the product. Additionally, it is worth treating it (if made from wood material) with special means that can provide protection to the product.

Design options

There are quite a lot of variations in which a garden bench can be made with your own hands. When it comes to products made from wooden material, then for this you will need the following list of tools and materials.

Any country bench has essentially the same assembly process. To more accurately understand such a process, it can be considered at specific example, based on the material listed above.

Help: A similar principle is used when self-creation benches made of wood in any version of its design.

Simple bench

In order to avoid any problems in the process of drawing up a drawing, it is possible to use a ready-made one. This bench is very easy to make. It is only necessary to install additional support bars of three larger and smaller sizes. Assembly occurs according to the specified principle.

Help: You can diversify such a product simply by changing color scheme, as well as drawing various kinds of patterns. But at the same time it is necessary to carry out processing of the wood material.

Classical

It is also quite simple to design, plus it is possible to vary the backrest by changing the arrangement of the slats, for example, making them cross-shaped. If you approach the process of creating such a shop with all the specified nuances, then it will not be used for a long enough time. For the drawing, you can use an existing one, and take the dimensions from a standard sample.

Folding bench for the garden

Metal bench

A DIY garden bench can be made not only from wooden material. You can use a metal frame, which is not difficult for anyone to make, even if you have no experience in forging metal.

To construct a frame for a bench, you can use cold forging, namely, to connect parts into an integral structure metal frame. At the same time, you can complement the product with something, decorating it.

The table shows the principle by which you make a garden bench with your own hands.

The good thing about this design is that due to the material that goes into the structure, it is light enough to be transported or moved to the desired location if desired. It is also important that changes temperature regime Such a product is stable, which is why it will be possible to use it for more than one year in a row.

Helpful information

When making a garden bench with your own hands, it is better to keep in mind the following rules, which will greatly simplify the work and help avoid difficulties:

1. When purchasing material for construction, it is worth considering the percentage of losses during cutting required size details. It is about 10%.
2. To avoid wastage of material, and possibly achieve savings, it is best to start manufacturing and cutting out elements and those boards that are the longest.
3. If you want to make the seat wider than indicated in standard sizes, then you need to remember that deflections of the wood material are possible in the absence of a supporting frame structure.
4. To avoid injury, it is better to initially take care of eliminating all angular and pointed areas.
5. It is also worth remembering that wood material is prone to drying out, which must be taken into account when drawing up a drawing and leaving spaces for gaps.

Video - interesting ideas for making a garden bench yourself

A light and comfortable garden bench can be placed on a cozy veranda or placed in the shade of trees so that you can hide from the heat and enjoy reading a book or a pleasant conversation. So, let's describe the main stages of its manufacture.

Whatever material you decide to make a bench from, to make it as comfortable as possible, certain proportions should be observed when constructing it:

• height: the seat is always located at a level of 0.5 m from the ground;
• width: at least half a meter;
• back height: 0.45 m;
• its tilt angle: ideal 45°;
• Armrest height: calculated from the seat level and should be 20 cm.

If the bench is dug into the ground, the length of the legs increases by at least 70 cm. In this case, its legs are lowered into the prepared holes, covered with stones and filled with concrete. Do not forget to pre-treat the wood with a solution that protects against rot and mold.

DIY bench step by step

It is better to make the back and seat of a garden bench not a solid canvas, but to make a small distance between the planks. In this case rainwater the boards will drain completely, the boards will be better ventilated, and the product will be less susceptible to rotting:

You can replace the stain with a strong solution of potassium permanganate. Wood treated with a similar composition acquires a dark and rich color. Depending on the amount of manganese, you can get a walnut shade or a rich mahogany color.

Bench made of wide boards

Bench made of flexible vine or willow twigs

Eco-friendly garden furniture, not only a bench, but also chairs and even a table, can be made from pre-soaked willow or vine twigs. You can also use branches of hazel, willow, aspen or even birch, but in the latter cases the product will last much less and will look rougher.

To collect raw materials, it will be necessary to wait until the shoots “ripen”. The optimal season for harvesting branches is from September to March. It is at this time that the rods acquire the required flexibility:

Types of benches

We have described only the simplest options for making a garden bench. It can be made from practically any materials:

If you are planning to make a wooden outdoor bench, it is better to use conifers or larch, which is difficult to rot. Old oak or hickory furniture that has been inherited can also be used as material to create a durable and very original garden product.

Should I buy a bench or make it myself?

Buying a bench for the garden is, of course, much easier. Moreover, the simplest of them are quite cheap.

But still, work done with your own hands will bring more satisfaction. And with a certain patience and dexterity, even made from improvised materials, it can become an exclusive work that you won’t be ashamed to show off to your friends and neighbors. For example, in the next photo the bench is made of ordinary pallets, painted with bright paint and decorated with decorative pillows.

Benches and benches in the country house and in the garden are primarily a place of relaxation. But just putting up a bench is not interesting. After all, you can create a beautiful corner. To not just relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. Moreover, they often play out the simplest designs, such that these benches can be made with their own hands by any person whose arms grow from their shoulders.

Photos of original benches (ideas for cottages and gardens)

Everyone knows what ordinary benches look like—they’ve seen them more than once. But I don’t want the usual one - the simplest one. Especially if you have already started the process of decorating the site or are just planning it. Why not start from the bench? And then other decorations will follow. You just have to start.

In the garden or near the house I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.

What could be simpler? Two wooden boxes in which flowers are planted and between them a couple of planed and sanded boards. This bench can be placed near the wall, and a couple of long boards can be placed on the wall to create a backrest.

Not everyone likes flower beds made of wood: wood requires care, and without it it quickly loses appearance. It is especially difficult to care for a tree that is in contact with the soil. Instead of wooden boxes there may be, for example, stone or concrete pedestals.

It’s very easy to make such a bench at the dacha with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a processed board, or you can do it yourself. Instead of a board, there can be half a log - depending on the style of the site. It is easier to secure the seat using a metal corner. It is attached to concrete using dowels, to wood - with self-tapping screws from below or through bolts.

If someone has large plants in durable flowerpots, you can implement the following idea. In this option, the bench covers the plants. To avoid surprises, flowerpots must be very durable...

Eat similar option benches made of boards and without plants: may need to be placed on or in. The supports are made of boards of the same size, and the seat is made of timber.

Bench made of boards - a non-standard option

And more variations on the same theme: hollow ones are used as support building blocks. Treated bars are inserted into the holes. This is the seat of the bench. Just round the edges of the beam, or it will be uncomfortable to sit.

For this garden bench it is advisable to find blocks big size, with thick walls. If not, you need to securely fasten the blocks to one another. The whole task is to first secure the blocks (for example, with pins), and then attach the bars to them (with bolts or dowels).

Log benches

If your site is decorated in a rustic or ethno style, the standard approach will not suit you. It is best to use logs in this case - with or without bark - it’s your choice.

The seat for the bench is made of logs - a trunk of large or medium diameter sawn lengthwise. The back is either a smaller diameter trunk, or simply a cut closer to the edge. The legs can also be made from narrow pieces of logs (look at the photo below).

Log bench - quick and easy

The legs and seats are connected to each other with metal pins: a hole of slightly smaller diameter is drilled under the pin in both parts. The pin is driven into one of them, the second part is pushed in and is also driven in, but this time they hit the wood rather than the pin. To avoid leaving traces, lay a piece unnecessary board and they hit it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can cut a little log, making a flat area of ​​the same size on both parts being connected. By increasing the support area, you will increase the reliability of the seat fastening: after all, the log weighs a lot.

Bench option without backrest

Another interesting option in the “ethno” style is shown in the photo above. It is made in stone, but this bench can also be made from logs. The seat is a very thick board, the legs are most of the deck large diameter. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cut with an axe, grinder or chainsaw), it’s easy to do.

Often in the countryside a work desk is needed. From a log you can make not only a bench, but also a table. A version of such an ensemble is shown in the photo. Only the tabletop is made of boards, all other parts are logs of different diameters or from halves.

A greater degree of processing is inherent in the next bench in the same style. The back, legs, and armrests are made of thick and not very thick branches, the seat is made of sanded and treated (barked and sanded) unedged boards.

The other bench was made almost the same way. Only the boards and branches are located in a different direction and the result is a different look. A DIY bench of this type does not require much skill. In this case, the more careless the work, the more decorative the result.

Wicker back - not often seen

You can make a rest area and a bench around the tree. The designs are simple, making the flooring is generally easy.

You can also supplement your recreation group. And above the bench you can put it - this is the “progenitor” of the usual arch - one of the types of light gazebo. And to make the relaxation completely complete, you can do, or.

Made of metal and wood

Few people will install a complete metal benches. They, of course, can be very beautiful, but in the summer they heat up to incredible temperatures, and when it gets a little colder, you can’t sit on them because they are too cold. Benches made of metal and wood do not have these disadvantages. Legs and load-bearing structure made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting shops in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.

In a more advanced form - with armrests, a backrest, soft cushions on the seat, such a design may look like in the photo. The wide seat turns the bench into a sofa, and pillows add comfort - covered with fabric furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.

One important point: if you make a seat or tabletop from several adjacent elements, they do not need to be butted end to end. There should be a gap of 3-4 mm between adjacent boards/bars. The wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is required.

If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. An ordinary round or corrugated pipe is bent, leaving the sides in the shape of the letter “P” with a wide back. The length of this backrest is the length of the bench. For the table, the dimensions are made a little larger: the legs and back are longer.

Make two identical blanks for the table and bench. Next, cut the boards to equal lengths. For the seat, about 40 cm, for the tabletop, at least 55 cm. Fasten to the pipes with furniture bolts with a flat head. To prevent the caps from sticking out, drill a hole of a slightly larger diameter under them.

Benches made of boards

The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you put soft pillows on them - and you can lie down.

Garden furniture in modern style easy to assemble: rectangles with partitions made of more thin boards, connected to each other.

Even the usual design of a country bench can become exclusive if you approach it with imagination: instead of legs and armrests, wooden wheels are used. The result is a designer item.

A bench made of boards with a back and wheels instead of sides - looks interesting

And the simplest possible is a board with legs in the shape of the letter “X”. Such shops were built centuries ago, and you can still see them today.

From the boards you can make a bench in a modern style: in the shape of the letter “P”. With this design, the main task is to ensure rigid fixation of the legs and seat: the pushing forces are not compensated for in any way. In this case, it is important to take a thick board or timber so that it does not sag. You can place the board “on edge”: this way the rigidity will be greater. To increase reliability, you can install corners from below.

The photo shows an option with a 45° cut. Having a miter box or circular saw Accurate cutting is easy to achieve. By accurately joining the workpieces and fastening them, we obtain an angle of 90°. If the seat does not sag, it will last a long time...

Interesting and reliable option The benches are shown in the photo below. The legs are assembled from boards of different lengths: each second is shorter by the width of the board for the seat. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.

Original benches

It seems like there’s more that can be thought of... but it turns out there’s a lot. For example, attach the seat to a large stone.

Make a structure from bamboo trunks.

Or a stone.

Sitting in winter will be unpleasant, but beautiful...

How to make a bench: photo reports

We won’t make benches out of stone—not everyone has the equipment, but we can make them out of different pieces of wood. Let's talk about making simple but unusual designs. So that a handmade bench can be a source of pride.

Bench without back

The design is simple, but looks interesting due to the specific material. For the legs, timber with rounded edges was used. If you have logs small size, you can trim them on the sides. You'll get almost the same effect. THIS material is not so rare; the legs are assembled from it in an unusual way: the bars are laid flat on top of each other. This adds zest and appeal.

This bench without a back has a length of about 120 cm, a width of about 45 cm, and a height of 38 cm. You can round the edges of the beam using a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with: it is already well processed and is easy to connect.

Depending on the found cross-section of the timber, calculate the length you will need. Determine how many bars will have to be stacked on top of each other to achieve the desired height. In this case, 5 bars were used for one leg. Total 45 cm * 5 pieces - 2.25 m. Two legs required 4.5 m of timber. The seat used a board 40 mm thick and 90 mm wide. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pieces = 6 m.

First we cut and process the boards for the seat. Their edges must be rounded. If not grinder or a router, you will have to work sandpaper, or you can find such a board or arrange at a sawmill to have it processed and sanded for you: it will be much less work. So, we cut the boards to the same length, sand them and varnish them (with or without tinting - your choice).

Place the bars for the legs one next to the other, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.

You can take metal pins, or you can make dowels - carved from wood. Holes slightly smaller in diameter are drilled for them; the depth of the hole is half the length of the pin. Then they are hammered into one part, and a second part is inserted into the same hole on top. The connection is reliable, but to be sure, you can add glue, although then the structure will turn out to be one-piece.

With a pin connection, the main task is to make the holes strictly one above the other so that the parts mounted on the pin give a smooth edge. We've done part of the work - we've drawn lines where we'll drill, now we need to measure the same distance from the edge. For this we will create a template. We take a piece of plank about 1.5 cm wide. We will drill holes at this distance from the edge of the bars. Having placed it exactly along the edge, we mark the places of intersection with the drawn perpendicular lines.

We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. We also make holes on one block from different sides in a checkerboard pattern. In a similar way, using pins, the legs are connected to the seat: two pins for each plank.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. It could be easier. Place all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long pin, with washers placed under the head and nut. You can nail the seat strip legs to the legs assembled in this way with nails from above or try to make a pin connection.

The bench was made by hand. Finishing work remains

If you nailed the seat, take some wood mastic suitable color, add some very fine sawdust and stir. Apply this mixture to the joints. When dry, smooth it with sandpaper. Sand all parts smooth and coat with varnish or wood paints for exterior use (preferably not covering ones, but those that leave the wood texture visible).

Read how and with what you can paint wood. It talks about lining, but the painting techniques remain the same, and the compositions must be taken for external use.

DIY bench made from broken chairs

In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs using bars of a suitable cross-section.

For greater rigidity at the bottom, at a distance of about 20 cm from the floor, where previously the chairs also had jumpers, we make another frame with transverse crossbars. It can be used as a footstool or to store some things.

After sanding, we paint the resulting structure. This time the paint should be ordinary: different types of wood can only be painted over with covering paints. Apply with a brush or from a spray can.

All that's left to do is cut the seat to size from thick plywood (8-10 mm thick) and cover it with foam rubber and fabric.

Garden chair/bench made from pallets

Everything is useful on the farm. Even cargo pallets can be used to make garden furniture. Moreover, there is no need to disassemble them: we use one for a seat, and from the second we will make a backrest. You will only need well-processed planks for the armrests and bars for the legs.

In one of the pallets we strengthen the fastening points by inserting pieces of bars. Having inserted it, we fasten it with self-tapping screws on one side and the other.

From a timber with a cross-section of at least 100*100 mm, we cut four identical sections 80 cm long. We screw them in those places that we have just reinforced. We leave 20-25 cm on the legs. We fasten with four long screws - 150 mm and no shorter.

It is important to maintain verticality and leave the same distance on the legs. Then the seat will be level. If there are errors in height, you can try to file it down, but then you will have to cut it from the top too - so that the armrests are even. So try to screw it straight. Deviations from the vertical can only be dealt with by screwing the leg back on.

We attach a second pallet to the rear posts, and boards for armrests on the sides.

All that remains is to cut out a piece of furniture foam rubber and cover it with fabric. You can also make pillows for the back. If you are not going to process everything thoroughly, but make a loft-style chair, use sandpaper or a sander, sanding all surfaces until smooth. You can coat it with paint, giving the wood a dark color.

Drawings of wooden benches

Video lessons

Several videos on how to make benches with your own hands.

To garden plot was quite comfortable, it should be properly equipped. An important component are garden benches. You can make them yourself different ways and from various materials.

Bench made of concrete slabs and boards with backrest

By looking at the drawings of the bench, you can find out the features of its structure. You can make such a design with your own hands relatively easily, quickly and without high financial costs.

Making a bench with a backrest with your own hands in step by step instructions described in great detail.

Assembly: initial stage

After preparatory work The time for wood processing is approaching. In order for a hand-made bench with a back to serve for a long time and decorate the area, the materials must be pre-treated.

The tree is covered antiseptic compounds and let it dry. After this you can start collecting backrests

On one of the two-meter boards, fifty centimeters are measured from the edges. At this level the edges of the beton slabs. From this mark another fifteen centimeters are measured towards the center of the board. This is where the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the back boards. Next, we measure fifteen centimeters for two more boards. There should be a gap of five centimeters between them. All this can be seen in the drawing.

Wood glue is applied to fifteen centimeter sections. They are attached to boards, the length of which is sixty-five centimeters. Additionally, they are secured with self-tapping screws.

On top, between the boards of the back, pieces of seventeen and a half centimeters are glued. To ensure that the parts stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.

All wooden parts can be coated varnish. This will give them additional stability and attractiveness.

Assembly of the main part

It is better to assemble the main part of the bench from both sides. Placed between the boards concrete plates, and in drilled holes insert M16 threaded rods fifty-five centimeters long. You will need four of them.

The rods are fastened with M16 nuts and washers. They are twisted simultaneously from different sides to make the bench level.

Simple DIY bench

You can make benches for your garden with your own hands quite quickly if you follow the instructions. Let's consider four options for such garden structures.

On drawings benches, all its features are indicated in detail. Making such a bench with your own hands is quite simple. The only difficult element is the concave seat.

The number of parts and their dimensions are indicated in the table.

We begin making a bench with our own hands from wood with blanks necessary details. Boards and beams are cut into pieces required length.

Making seat supports will be somewhat more difficult. You will need to mark the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. The sections are processed with sandpaper.

The seat supports are attached to the two upper drawers. One on each edge and one in the middle. Next, screw in the supports, spaced from the outer ones by the width of the leg. All connections are made with self-tapping screws.

Boards are attached to the resulting base seats. It is advisable to deepen the screw caps.

Then attach legs. They are attached to the seat supports. The lower drawers help secure the legs.

The finished product is coated antiseptic and varnish.

Simple bench No. 2

To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.

To make the base stable, the flower boxes must be glued or connected from the inside with staples secured with self-tapping screws. The container is filled with a layer of drainage and soil. This increases their stability.

The seat for the bench is made of boards. To do this, they are cut into pieces of the required length. These blanks are laid so that there is a distance of half a centimeter between them. Then they are connected using transverse strips. The planks are placed in three places: at the edges and in the middle. Corners are attached to the slats. With their help, the seat will be secured to the flower girls.

DIY bench with backrest

Prepare the bench parts shown in the figure. They are being processed antiseptics before connecting.

Then the parts are assembled into supports. The corners are first rounded and chamfered. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.

The inclination of the backrest is determined by part D, after which it is connected to part A. Similarly, but in a mirror image, another support is made.

After this, the back and seat are assembled. To do this, the supports are placed so that there is a distance of one meter and twenty centimeters between them. First, the front and rear strips are screwed to the supports, then all the rest, and finally the stops are screwed in.

At the last stage, the back of this bench is screwed on.

Bench No. 4Another option for a simple DIY bench. Its length is one hundred twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the backrest is also fifty centimeters.

The base is made from boards, the thickness of which is five centimeters and the width from ten to twelve. One of the legs continues and serves as a support for the back. The supports are connected using the “half-tree” method and secured with bolts.

The basis for the seat is a block secured with self-tapping screws. The short supports on the back of the bench are connected with a collet to increase stability. The seat and back are covered with boards of less thickness. The surface is painted or varnished.

A simple bench with a back for a summer cottage

The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with our own hands, then this option will be the most optimal in terms of the simplicity of the process and the result obtained.

It is better to purchase materials already cut to size. If this is not an option, then you need to cut them yourself.

The resulting blanks polished. The ends of the boards are processed with an electric planer.

The back legs of this simple DIY bench also support the backrest. To create the desired level of inclination, the workpieces are marked.

At a height of forty centimeters, mark the attachment point seats. Above, the board is cut at an angle of twenty degrees. The cuts on the two workpieces must be identical.

First they collect legs benches: the front ones are connected to the back ones using a beam. It is better to do this from above and below.

When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving a distance of one or two centimeters.

To strengthen the structure and increase its stability, make the lower harness timber along the legs. Two boards are attached for the back.

Finish the work with finishing coated, which will protect the product from moisture and adverse conditions.

DIY pallet bench

Make a bench with your own hands from pallets It’s not difficult if you use your imagination. To do this you will need three or four of these wooden structures. Some will need to be sawed to obtain additional parts. The most simple design DIY benches made from pallets, when two pallets are attached perpendicular to each other, creating a back and seat.

To prevent the design from becoming too bulky, it is better to cut the pallets according the right sizes. The elements are fastened with self-tapping screws. Add side parts to enhance strength and make legs. All this can be seen in the photo.

Since the material of the pallets is untreated and rough, it will be required first polish. This will allow you to avoid splinters.

The manufacture of a bench with your own hands from pallets is completed by coating it with varnish or paint.

Bench puzzle

You can make such a bench with your own hands if you have a wide board and cuttings for shovels. Curly seats are cut out of the board in the form of puzzle pieces. Legs made from cuttings for shovels are attached to them. The result is separate stools that quickly assemble into one long bench. All manufacturing stages are discussed in detail in step-by-step photos.

Benches from unnecessary chairs: two DIY options

First option

To create such a bench for your dacha with your own hands, you will need four old chair.

From the first two chairs remove parts from the front of the seat.

The remaining sawed off the front legs are slightly lower than the seat structure.

From the resulting parts you need take off old varnish or paint. To do this, apply to the parts special remedy, dissolving paint coatings. Then the softened layer can be removed with a spatula.

The racks should drill holes for dowels. Holes are required on the front and end sides.

The dowels are lubricated with glue and inserted into the drilled holes.

When the dowels are glued, you can assemble base benches. To make the structure durable, the parts are fastened with self-tapping screws. Surface of the structure sanded.

For seats benches choose a board that is suitable in size, saw off the excess.

If several narrower boards are used, they are glued together with wood glue. For a tight connection, they are clamped with clamps and wait for the glue to dry.

The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.

When the glue has dried, cover the seat with masking tape and paint paint the remaining structural elements for wood.

The tape is removed and the seat is treated stain. Finally, the entire bench is varnished.

Second option

To make a second garden bench with your own hands from old furniture you will need two chairs. It is better if the back and hind legs are not separated.

Two identical chairs clean up all parts of the structure except the rear legs with the back.

They take bars five centimeters wide and three centimeters thick. Cut two parts equal in length to the width of the chairs, and two pieces of the same length as the finished bench. A rectangle is assembled from these four parts. It is secured to the backs of chairs with self-tapping screws.

Another frame is assembled in the same way. Several transverse strips are attached to it. This design is attached under the seat, makes the bench more reliable and acts as a shelf.

If the chairs have old covering, then remove it with sandpaper. After this, the surface is puttied with a special compound or coated with a primer. When the layer has dried, it must be sanded with fine-grained sandpaper. Finally, the structure is coated with paint.

The seat for the garden bench is made by hand from Chipboard or plywood. A rectangle is cut out of the selected material, which is half a centimeter larger than the base on each side. Then cut out a piece foam rubber with the same dimensions. A rectangle is cut out from upholstery fabric. It should be five centimeters larger than the seat on each side.

Foam rubber is placed on a sheet of plywood and covered with fabric on top. The fabric is attached from the inside out to the furniture stapler.

The seat is attached to the base with a piano hinge.

Bench-swing

To make such a bench for your dacha with your own hands, you should prepare necessary materials. Manufacturing begins with creation basics designs. The seat bars are attached to the back bars at the selected angle.

Additional ones are installed along the seat ribs, providing rigidity.

Attached to the seat planks, drilling holes for fastening in the base bars. The same goes for the back.

Armrests are installed on both sides of the seat. They can be secured with bolts.

The resulting bench cover wood protection products and varnish. It is very important to paint everything as carefully as possible.

The bottom of the bench is reinforced with metal profile. Chains are attached to the profile on which the swing bench will be suspended. It is imperative to check the reliability of the beams on which the bench will be suspended.

Log bench

To make such a bench with your own hands from wood you will need chainsaw. The main material is a thick log one meter long.

Log mark, so that you get two slightly unequal parts. The smaller one will be used to make the backrest, and the larger one will be used to make the seat.

Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.

The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is secured on top. The bench is almost ready. All that remains is to give it a more decorative look.

Can the seat be placed on legs. To do this, recesses are made in the lower part to install a pair of logs as legs.

Transformable bench

The design features of the transformer can be seen in the drawings of the bench. A transformer bench is made with your own hands from planed boards, which is sawn to the specified dimensions.

Sliced timber parts holes for fasteners are drilled.

At the table top, the boards located on the edge can be made wavy.

In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.

The edges of parts and edges are processed and rounded.

All elements are assembled using screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.

Wooden parts are painted stain.

The structural parts that will move are connected by hinges.

Parts of a round shape are placed between the boards of the tabletop. cuttings

Install a stop for backrests

A hand-made transformer bench is covered varnish.

Rocking bench

Do original bench making a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which contain a small number of parts.

The side parts according to the pattern are transferred to Europlywood three centimeters thick. They are cut out using a jigsaw and the ends are processed with a grinder.

To fasten connecting strips, markings are made. Then the holes are drilled. After assembling the frame, the slats are attached using self-tapping screws. The fastening points are sprayed, and the entire product is varnished.

Bench around a tree

The simplest version of such a bench is hexagonal The size depends on the size of the tree. Measurements are taken at the height of the seat. A margin of fifteen to twenty centimeters is added to the result obtained. If you divide the result by 1.75, you will get the length of the inner side.

To cut boards ten centimeters wide, they are laid in four rows with intervals of one centimeter.

The cutting location is marked immediately for all rows with an angle of thirty degrees. So cut out six sets of blanks.

Legs are used with a height of sixty to seventy centimeters. They are connected by cross members by drilling holes and using bolts and nuts.

The seat is installed so that the joints are located in the center of the ribs of the legs. The outer parts are screwed on first, and then the inner ones. In this way, the entire hexagonal structure around the tree is assembled.

Finally, the back is made and the apron is installed. The result is a DIY circular bench with a backrest.

The finished product is processed oil impregnation.

Bench made of curved branches

A bench made of curved branches will look original. It will require branches for the front part, two legs, a horizontal top and a pair of transverse branches.

Sawing branches so that they fit each other as accurately as possible. Next they are connected by metal corners.

The back part is made in the same way and connected to the front.

The finished product is placed on a flat surface and the seat is assembled.

Bench options

• Log bench which goes well with surrounding nature. It consists of half a log, used for a seat, and two short round logs, which are legs.
  
• Beautiful wooden bench with a back and armrests, reminiscent of a sofa. Curved and cut elements make it more attractive, while leaving knots and irregularities gives the structure a natural look.
  
• Bench made of wood and metal. The base of the structure is metal. The wooden parts of the seat and back are attached to it. The thin metal parts make it look lightweight.
  
• The bench has a simple, classic shape. It is made of wooden, pretty wide boards. This width allows you to sit comfortably on the bench. Armrests make the design more complete.
  
• Original bench made of wood with figured details. This option is well suited for a site with a natural, rural design. Carved legs and armrests, a figured back - all this gives the product originality.
  
• Bench with an interestingly shaped back. The curved parts gradually bend back, creating a unique design. The seat is slightly curved but has a more traditional appearance.
  
• Wooden complex- a table with two benches. The design looks traditional due to the material used. An original solution is the fastening of all components into a single structure.
  
• The bench is made of solid logs. Cut from it single piece, combining the back and seat. The legs are attached to the bottom. The log required is quite large.
  
• Bench with storage box for toys. Outwardly it looks like an ordinary wooden bench-sofa, but under the seat there is a drawer in which you can put various things.
  
• A comfortable bench made of wood with a simple shape. The base is made in the form of a rectangular box. The back is also simple with a straight shape. The seat has soft cushions for added comfort.
  
• Wooden bench located around a tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
  
• A simple bench made of wide boards. It looks solid, but its dimensions are somewhat concealed due to the gaps between the boards and the light blue, in which it is painted.