Shower room ideas. Successful design of a bathroom with a shower (64 photos). How to place the shower cubicle correctly

The latest trend in bathroom design is showers. Yes, yes, those same shower cubicles that were previously installed only by desperate owners of apartments of more than modest and compact layouts, who understand that a standard bathtub not only “eats up” space, but also looks rather ridiculous on the scale of a tiny room. The boom in the plumbing industry has transformed the booth from a "vehicle" into a real "luxury" - and it's not about the price. Today, a huge variety and high aesthetics of shower stalls make it possible to use them to create an original and ergonomic interior, the development stages of which will be discussed further.

Bathroom shower: are you sure this is for you?

To finally be convinced of the correctness of the chosen solution and start developing the design of a bathroom with a shower cabin, weigh the pros and cons again.

Pros and cons of shower cabins

Choosing a shower cabin

There are a lot of criteria for choosing a shower stall. It is necessary to take into account its type, size, equipment, design and, of course, the combination of quality and price. Since now we are talking about the design of the bathroom, we will "deal" with the shower cabin in terms of its design and dimensions.

Showers for small bathrooms

A small bathroom with a shower is a smart and practical solution. True, there is one "but": the selection of a model will have to be taken as seriously as possible, which means that the choice may be delayed. Below is a selection of tips to help you find the “right” solution.

• Special attention it is worth paying attention to corner shower cabins: in a bathroom with a small area, you will have to "fight" almost for every square centimeter. The models under consideration will help to make good use of the corner - the space that gets littered the fastest and most often does not carry any "semantic" load in the interior.

• The smallest area is "eaten" by corner booths, the pallet of which has a "quarter circle" shape.

• A rectangular or square cubicle is also possible in a small bathroom, if there is a niche in the room that is suitable in size and allows you to bring the necessary communications.

• Preference should be given to cabins with sliding (sliding) or folding doors. Hinged doors require free space in front of the entrance.

• Fully transparent shower enclosures look more advantageous in small rooms, as they are visually perceived as lighter. The bathroom doesn't seem so cluttered.

• The desire to choose the smallest shower stall for a tiny bathroom is understandable. The main thing is not to follow his lead. Minimum size shower stall, in which every member of the family will feel comfortable, is 80x80 cm... Those who do not have even this area can install a stationary shower enclosure.

Showers for large bathrooms

The owners of spacious bathrooms have much more freedom when choosing shower cabins - there is no need to think about saving space and types of doors. This allows you to fully focus on the design of the model.

The only advice for owners of spacious bathrooms is to prefer a corner booth to any other if a traditional bathtub is planned to be installed in the room besides it. This will allow you to use the area in the most efficient way.

When combining a bathtub and a separate shower in the bathroom, it is worth considering the option of creating a stationary shower enclosure, which usually takes much less valuable centimeters.

If there is not so much space, you can purchase a shower cabin with a bathtub. These are models with a high roomy pallet. Such cabins are usually equipped with different kinds hydromassage and some other functions.

Bathroom with shower: how to organize the space?

Tips for placing shower stalls in large and small bathtubs are mostly the same.

Ergonomic rules: we make the design of a bathroom with a shower cabin comfortable

1. Regardless of whether the doors of the booth are sliding open or swinging open, the free space in front of them should be at least 75 cm. This is the minimum that a person needs to undress in front of the shower and wrap in a towel after leaving the booth.
2. The minimum distance from the door to the shower stall (if it is installed on the same wall where the opening is located) should be 15 cm.
3. The minimum distance from the booth to other plumbing equipment is 30 cm. If the toilet, bidet or washbasin is placed closer, it will be extremely inconvenient to use them.
4. The optimal size of the shower stall or corner is 90x90 cm or more.

Placing a shower stall in the bathroom

To make a bathroom with a shower stall look the most advantageous, you should use the following tips. Large bathroom owners, however, may not be very strict about them.

Square bathroom

- If one of the corners of the bathroom is cut off to decorate the entrance, the booth is located either in the corner opposite the door, or along one of the walls that are not adjacent to the door.

- If the door to the bathroom is located in the middle of the wall, the cubicle is located in any corner or on the wall not opposite to the entrance (placement on the wall adjacent to the entrance helps to visually expand the space).

- If the door to the bathroom is located on the side, the booth is usually mounted either opposite the entrance, or diagonally from it.

Rectangular bathroom

- In cases where a). one of the corners is cut off to decorate the entrance, b). the entrance is located in the middle or on the side of the "short" wall, c). the entrance is on the side " long wall"- the booth is located in any of the corners" far "from the entrance or along the" far "wall.

- The door is located in the middle of the "long" wall - the booth is placed along the "short" side walls or in the corners adjacent to the wall with the entrance.

Bathroom design with shower: examples

A stationary shower cabin in a small combined bathroom. Minimum space - maximum functionality. It is also convenient in terms of hygiene

In a small shared bathroom, it may be necessary to move the toilet to accommodate the shower stall and washbasin

If there is a small bathroom in the apartment, it will be important to save extra space by replacing the usual bathtub with a shower cabin.

Before choosing this design, it is worth figuring out what the varieties and features are, what materials they are made of.

The main advantages of shower cabins:

• Saving water as opposed to a bath;
• Saving time due to the absence of the need to collect water in advance;
• Saving useful space;
• Hygiene.

Model selection

In the modern market of sanitary equipment, models of open and closed shower cabins are presented.

Open

This is the name of the booths that have a pallet and two partitions adjacent to the walls. There is no top of such a cabin, but it is placed in the corner of the room.

The undoubted advantage of such structures will be low cost and compactness.

Closed

This design, in addition to the one described above, is complemented by a roof and is completely sealed, which prevents moisture from escaping outside the booth itself.

They can be equipped with hydromassage and even a radio, and they can be installed not only in the corner of the room.

Classification of species

Open type shower enclosure

There are no rear partitions, and screens are installed on the sides. The configuration of shower cabins is of the following shapes: semicircular, square and rectangular.

A rectangular shape should be chosen if the room is spacious enough. Semicircular shapes, on the contrary, will save space in a small room.

The maximum possible height of such shower cabins does not exceed 170 cm, and the width will not exceed 90 cm.

Without top baffle

Advantages:

• low price in comparison with closed type cabins;
• fits easily even in a room with low ceilings, as height does not exceed 2 m;
• suitable for tall people;
• the presence of back walls will protect the walls of the room from water ingress.

Disadvantages:

• lack of complete tightness, due to which steam and water settle on the ceiling and on furniture inside the room;
• there is no possibility of using a steam generator, cascade and tropical showers.

Closed design

It has numerous advantages, partially mitigated by the high cost and massiveness of the cab.

Among the advantages are:

• the possibility of location in any part of the room;
• there is a possibility of using deep pallets;
• the presence of a hydromassage, a cascade shower and a steam room;
• complete sealing.

Hydro module

Contains both a shower cubicle and a bath. Has all the virtues closed cockpit... Allows you to shower while lying down and install additional accessories.

Pallet selection

Acrylic

The most popular option. They heat up quickly and retain heat for a long time. They do not make noise from water and are practically not slippery.

These pallets are easy to clean and have a service life of over 15 years.

Cast iron

Particularly durable option. They are able to retain heat in themselves for a long time, but they heat up for a long time. The price is relatively low.

Among the shortcomings can be noted a very large mass, a small variety of shapes and noise.

Steel

The durability of this pallet directly depends on the quality of the enamel coating. They are quite slippery, noisy and cool down quickly. Among the advantages are durability, low weight and price.

Ceramic

Quite an expensive and fragile option. Advantages include good sound absorption and heat retention. In addition, they are presentable and easy to clean.

Stone

They are made of natural and artificial stone. The second option is preferable in terms of price and durability. Among the advantages are quick warming up, a pleasant surface and a beautiful view.

Wooden

The best option for country house... They require special processing and care, but they are pleasant for the feet and do not freeze.

Partition selection

Curtain with water-repellent properties- good splash protection. It is made of polyethylene oilcloth or rubberized fabric. Most a budget option... Tall curtains should be weighted at the bottom to ensure better airtightness.

Tempered glass is a durable, particularly cozy option. They are not afraid of accidental shocks and high humidity.

Polymer walls - easy to clean and have an aesthetic appearance. Outwardly they resemble glass partitions, however, they are prone to scratches and are afraid of chemical cleaning agents.

Plastic screens - loses in comfort and beauty to the options presented above. Easy to clean and very low cost.

Additional functions

Modern models of shower cubicles can have the following additional functions:

• Hydromassage. Promotes good awakening and sleep preparation.
• Steam generator. Steam is not very hot and is relaxing.
• Aromatherapy. Allows for SPA production.
• Built-in sauna. Able to simulate being in a sauna.
• Ozonizing. It is used for healing and cleansing purposes.
• Infrared radiation. Promotes improved health and comfort.
• Entertaining. Allows you to listen to music, watch TV while taking a shower.

Thus, for the right approach to the choice of a shower cabin, you can not only save your budget, but also purchase at the same time quality product that meets your interests.

Photo of modern shower cabins for the bathroom

Undoubtedly, the main plus of the shower cabin is space saving. It can be placed in a corner to fill the vacated space. necessary furniture... However, this rational approach does not exclude the aesthetic component of the issue. The interior of the bathroom, combined with a shower stall, is an excellent basis for the embodiment of the most non-standard design solutions.

Cabin or corner?

• A shower cubicle is a "box" with a pallet (usually acrylic), two walls, a sliding door and a ceiling with a watering can built into it.

The cab is hermetically sealed, so it can be installed almost anywhere without additional waterproofing of the walls and floor.

• The shower enclosure most often has glass or plastic partition doors on both sides, while the rear walls remain open, so choosing a shower enclosure implies additional waterproofing work.

To your taste, you can install a deep or low tray, or choose a stylish shower option without it at all, by mounting the drain directly into the floor tiles or by making a low restrictive curb.

In any case, you can decorate the interior of a bathroom with a shower in different ways. What should you choose?

Reasons for a shower enclosure

• For lovers of open spaces, a shower corner is more suitable: there is more space in it, there is no feeling of constraint, enclosed space.

You can safely adjust its size: in a wide range of hardware stores, you can easily choose a pallet and doors that are right for you. The shower enclosure will perfectly fit into the loft, hi-tech and other "industrial" styles.

• A shower enclosure can be a stylish addition to your bathroom.

Doors made of frosted, ornamented, textured or colored glass, finishing with contrasting tiles, a sink mounted in the floor, wooden floor grilles - the touches of a modern urbanized dwelling will resonate in the souls of those who love stylish details.

The reasons for the shower

• The shower cabin, in turn, will perfectly fit into the interior of the smallest bathroom: the dimensions of the most compact models are only 80x80 cm.

Such a booth will neatly fit into a corner, leaving free space for a washing machine, sink or storage cabinets.

• You can easily install the cabin after you have completed the design of the restroom.

The existing interior of the bathroom with the installation of a shower stall will not be disturbed and stylistically distorted.

• A huge plus is the fact that the installation of a shower stall does not require additional work for waterproofing, also does not require mounting a pallet or laying tiles.

And additional built-in technical gadgets (Turkish bath, Charcot shower, various ceiling shower modes) will become nice bonus for those who like to pamper themselves. A nightly home spa before bed is a good reason for a shower, isn't it?

Materials (edit)

Mosaic and tiles

Shower enclosure space - place increased dampness and deposits of lime and limescale. Therefore, a tile or mosaic is an ideal material for design. It is dirt and water repellent, sealed and easy to care for. In hardware stores, a huge assortment of tiles, porcelain stoneware, of different sizes, textures and colors is presented.

Fakturanya plaster

For lovers of non-standard solutions and new technologies, it is perfect textured plaster: certain types and grades of plaster are water-repellent and suitable for rooms with high humidity... As a rule, such plasters contain granite or marble chips.

Plastic panels

Also, plastic panels are suitable for finishing the area near the shower stall. They can imitate the natural texture of wood or stone, and any image or print can be applied to it. They are wear resistant and have good water repellency.

Colors and textures

• So that the shower cubicle does not look bulky, visually filling the entire interior, choose cubicles with transparent doors and back panels to match the walls of the bathroom.

Shower enclosures are also great: glass or frosted doors and trim to match the main walls will help create the illusion of more space.

• Having made a choice in favor of monochrome, you can safely mix textures.

Floor and wall tiles can differ in prints or the size of the same print, texture, matte and shiny surfaces. Color will be responsible for stylistic unity here - it is he who will preserve the integrity of the interior of the bathroom with a shower.

• By combining several shades of tiles or wall panels, you can visually divide the room into zones.

If the shower enclosure is located not in the corner of the bathroom, but in a niche, it can be decorated with darker tiles or mosaic patterns. This, on the contrary, will add volume to the room and harmonize the interior of the bathroom, combined with a shower.

In an effort to expand the usable bathroom space and modernize the environment, many prefer ergonomic designs for making water treatments... The shower stall is a practical and multifunctional device. It doesn't take up much space. To create a truly warm, relaxing and soothing atmosphere, it is important to properly design a bathroom with a shower.

V modern interiors bathroom - the photo clearly confirms this - more and more often you can see a shower cabin instead of a traditional bath. This popularity is due to the significant advantages of this sanitary ware. The shower cabin has more compact dimensions, which allows the design to fit into even the smallest room. This frees up enough space to accommodate a washing machine or pieces of furniture for storing various accessories. In the shower stall, you can quickly take a shower. This allows you to significantly reduce water consumption, which does not affect the effectiveness of water procedures.

Due to the presence of sealed doors during the shower, water does not splash around the room, and the inside of the stall is kept warm. Modern models of shower stalls are equipped with various functions, ranging from aromatherapy to hydromassage. It can also house a telephone and radio. The trays have an anti-slip coating, which minimizes the risk of injury while showering. The depth of the structures may vary.

Helpful advice! Deep shower trays can be used for bathing small children.

Due to the wide variety of model designs, the shower stall easily fits into any room interior, while creating a unique atmosphere in the bathroom.

Despite a number of distinctive advantages, shower cabins have their drawbacks. During the implementation of water procedures, you can stand or sit here, which can be uncomfortable for the elderly. The more additional functions a product has, the more significant its dimensions will be. If the water supply pressure is low, you will not be able to take advantage of all the features of the shower stall. To make the structure look aesthetically pleasing, it must be cleaned regularly embossed surface, which is more time consuming than caring for a traditional bathroom.

How to choose a bathroom shower

Today, manufacturers produce a wide range of products that differ in type, size, shape, material of manufacture and design. When choosing a specific model, it is important to take into account the characteristics and dimensions of the room. When planning a small bathroom, you should give preference to a compact model, which is conveniently located in the corner. For spacious bathrooms, the shower stall can be of any shape and size, but the design should not unnecessarily overload the space.

Important! For convenient use of the shower stall, it is necessary to organize free access to it, without blocking the path with other devices.

The shape and size of the product are selected based on the location of the booth, which depends on the layout of the premises, the varieties of which are shown in the photo of the bathroom options. To place a square shape, preference should be given to corner models, which are conveniently located in the corner opposite the front door. If the doorway is located in the central part of the wall, the booth should be in the far corner.

For rectangular rooms, square, round and rectangular structures are suitable. The booth can be located along a wall with a doorway or opposite it.

Bathroom design with open shower

Shower cabins open type equipped with side surfaces, but do not have back panels and base. Such structures are attached to the ceiling and walls of the bathroom. Built-in showers have glass doors, which are assembled in a stainless steel or aluminum profile and firmly attached to the walls.

Open cabins, also called shower enclosures, are economy class products. They have basic set opportunities. This is because the structure does not have a ceiling, and functions such as sauna or aromatherapy will be effective in an enclosed space. Different options for the execution of booths can be seen in the photo of the design of a bathroom with a shower corner.

Installation of open-type models requires high-quality waterproofing and leveling of the floor, walls and ceiling. Such a shower stall is mounted exclusively in a niche or in a corner of the room. This model can also be installed directly on the bathroom floor. In this case, a concrete bowl is cast, which is finished with tiles with an anti-slip surface.

A corner shower takes up a minimum of space. The maximum height of the structures is 1.7 m, the width is 0.9 m. Their installation is easy, not labor-intensive, so you do not need to resort to the services of specialists. The products have an affordable cost that is acceptable for people with limited financial resources. The price of an open-type shower stall is in the range of 7-22 thousand rubles. Among the disadvantages of open-type cabins, the following can be distinguished:

• thorough installation of product elements;
• labor-intensive repair of engineering communications;
• high level of humidity in the room;
• inability to install an ozonation system and a steam generator.

Bathroom with enclosed shower cabin: design options

A fully autonomous sanitary unit in the form of a closed shower stall consists of a pallet, walls and a ceiling, equipped with many additional functions. The pallet has a depth of 3 to 45 cm. Most often it is made of acrylic or stainless steel. Basic structure can be aluminum or stainless.

For the manufacture of side walls, transparent, translucent silicate glass or plexiglass is used. Also applies monolithic polycarbonate that can take any shape. Doors open with a swing or sliding method. The first option requires additional space. Variations of closed boxes can be seen in the photo of bathroom renovations with a shower.

This design has solid dimensions, which requires much more free space than open models. A closed shower stall can have different shape, size and is made from a variety of materials. The structure is easily mounted and dismantled, which makes it possible to transport or remove the device when performing repairs on the premises.

A closed shower in an apartment has a number of advantages:

• high level of soundproofing;
• increased moisture insulation, which does not affect the microclimate in the room;
• a wide variety of designs;
• easy and quick installation;
• a wide range of additional functions.

The operation of the shower stall is controlled by an electronic regulator. By simply pressing a button, you can select the desired operating mode of the device. There are models equipped with mechanical controls, which have a lower cost. You can buy a shower box for 30-40 thousand rubles. There are exclusive designer models, the cost of which can be up to 150 thousand rubles.

Additional features of enclosed shower stalls

Enclosed shower stalls are equipped with the following functions:

• horizontal hydromassage,
• Turkish bath;
• rain shower;
• chromotherapy;
• aromatherapy;
• contrast shower;
• voice control;
• ventilation.

Horizontal hydromassage is carried out using air bubbles and elastic jets of water, which give in to the required intensity, and in a certain order. This procedure relaxes the body, improves the body's blood circulation and metabolism, and helps in the fight against cellulite and obesity. Hydromassage can be horizontal or vertical. The number of nozzles through which water is supplied determines the quality of the procedure. The more there are, the more effective the hydromassage will be.

The Turkish bath is organized thanks to a built-in steam generator, through which the enclosed space is saturated with steam. Thus, a high air humidity is created at a low water temperature. The operation of this function is possible at a certain water pressure in the pipes. You can add a different flavor to the steam using aromatic oil.

A rain shower is formed by the operation of a special nozzle on the roof of the booth, which, when switched on, allows the smallest droplets of water to be dispersed, creating a rain effect. Chromotherapy is carried out thanks to LEDs built into the ceiling of the booth different color that color the water. Subsequent color perception contributes to the healing of the body. A contrast shower is performed by alternately supplying cold and hot water in a given temperature range.

Helpful advice! Availability a large number different functions in the shower stall requires the supply of electricity to it. For reliable and durable operation, it is better to select a separate cable line by grounding it.

Combined shower stalls for bathrooms

Combination models combine a bathtub and a cubicle. It can be a full-fledged bathtub, which is closed by side walls. Depending on the constructive solution the booth can have a top cover or be installed without it. There are open and closed models. In the first version, the cabin is fenced only with doors - without a ceiling. Closed models represent a complete shower box. There are combination baths with shower curtains of different shapes.

Structures with a high pallet (up to 40 cm) should be chosen by families with children. Small devices with a shower in the bathroom with a tray height of 10-15 cm are suitable for the elderly. For the rest of the category, the best option is considered to be a height of 20-30 cm. The combined shower stall is equipped with all the functions of a closed flask and is complemented by a jacuzzi. Such products are installed in large rooms with an area of ​​at least 7-8 m². average cost of these booths is 65 thousand rubles. A closed hydromassage box with a deep tray and a multifunctional shower cabin is very popular, the cost of which reaches 100 thousand rubles.

Related article:

Their purpose, advantages. A variety of models by type of opening. Technical and aesthetic characteristics. Criteria for the correct choice.

Homemade shower cabin: design options

You can create a shower cabin with your own hands. In this case, there are three options:

• buy a ready-made pallet and erect enclosing elements;
• make the pallet yourself, and purchase ready-made doors and walls;
• make the whole structure with your own hands.

The first two varieties limit the choice of the size and configuration of the structure, which is determined by the factory standards. The latter option provides an opportunity to implement any, even the most extraordinary, idea.

The first step is to create a base for the cockpit. How to make a shower tray? To do this, part of the floor should be protected with formwork or brickwork. The entire inner surface is reliably coated with waterproofing mastic. Next, the laying is organized sewer pipe, then the ladder is exposed.

Important! The ladder should be positioned in such a way that, after pouring the concrete and tiling the surface, it is flush with the finish.

Concrete is being poured with a slight slope towards the ladder. After the screed has fully set, the floor and the sides of the pallet are finished with tiles.

Fencing options for homemade shower stalls in the bathroom

The enclosing structures can be made of any moisture resistant building material... You can also use wood, but it should be treated with a water-repellent compound.

The traditional solution is to create the walls of the structure from moisture resistant drywall with subsequent facing of the surface with ceramic tiles. You can get a warm and bright space by erecting a shower from glass blocks. Masonry is quick and allows you to create any form of fencing. An insert made of decorative tiles that imitates natural stone will help to add originality to such a design. It is advisable to use the same material for finishing the pallet.

You can get a shower without a cabin using a waterproof fabric suspended from a chrome pipe and flowing in flowing folds. In this case, it is better to finish the pallet with mosaic tiles. Polycarbonate is the ideal solution for creating the walls of the booth. This durable, moisture resistant and decorative material is framed with aluminum or plastic profile... Doors can be made with swing or sliding doors. For the latter option, a guide profile is also used.

You can get a shower stall of an unusual shape through cellular polycarbonate, which is clearly demonstrated by the photos of the shower cabin design. Plexiglass is popular for shower enclosures. Since the material is fragile, it should be framed in a stainless steel profile.

The tempered glass shower cubicle will look elegant and airy. This is ideal for small spaces. Aesthetics can be added to the design with a harmonious combination of tiles, which trim half the height of the booth, and tempered glass at the top of the railing.

Variety of designs depending on the shape of the product

The shape of the shower cabin, on which its size and convenience of location depend, is determined by the modification of the pallet. Most universal option is a corner model that can be installed in any size room. The pallet is square or made in the form of a quarter circle. This is the most compact type of construction, taking up a minimum of space, as shown in the photo of the shower cabin in Khrushchev. The device, located in the corner, allows you to free up more space for installing a washing machine, bidet, washbasin or bathroom cabinet.

A rectangular shower cabin is considered a classic. However, it takes up a lot of space. Such a cabin is most often installed along one of the walls. This solution not only turns out to be convenient, but also allows you to visually align the proportions of the room. A round shower stall, which can be located in the corner, in the center or near the wall, will look unusual. The design of this shape is advisable only for large rooms, which is clearly shown in the photo of the most beautiful bathrooms.

Helpful advice! Choosing a round shower cabin, you should give preference to glass models that look the most impressive, creating the illusion of a waterfall.

The pentagonal model is considered the most dimensional, but the most unusual and interesting one. Such a design is most often installed in large combined bathrooms, where the cabin does not clutter up the interior, providing free access to other elements of the room.

What are the sizes of symmetrical and asymmetric shower enclosures?

To ensure trouble-free operation of the device for a long time, it is important to choose the right size of the cab. Undoubtedly, the larger the dimensions of the product, the more convenient it is to use it. However, the model you like may simply not fit into the dimensions of the room.

The optimal size of a shower cabin for symmetrical models in width is 75, 80, 90 and 100 cm. Asymmetric devices have dimensions of 80x120 and 80x180 cm. Standard height construction is 198 cm and 230 cm. However, you can make an individual order by specifying certain dimensions. Square products have dimensions of 80x80 and 100x100 cm.

For small rooms, models are ideal where the pallet is in the shape of a quarter circle with dimensions of 75x75 cm.The diameter of round products varies from 75 to 100 cm. Combined shower cabins can have dimensions of more than 100 cm. comfortable option for taking a shower, a booth with dimensions of 90x90 cm is considered. The height of the pallet can be 3-40 cm, and it is also sometimes performed flush with the floor. In this case, it is important to ensure proper waterproofing.

Helpful advice! For bathrooms in an apartment, you should choose structures with a height of at least 20 cm in order to reduce the likelihood of flooding of neighbors.

Material for making the shower tray

The service life of the product depends on the type of material used to make the pallet. Also, an important point is the parameters of sound and noise absorption. For safe use products, the coating should not be slippery.

The most popular are acrylic pallets. The material is able to retain heat for a long time, while heating up in a matter of minutes. Acrylic pallets are characterized by non-slip coating and safe operation. No unpleasant noise is emitted when the water jets hit the surface. Due to the fact that acrylic is easy to process, the product can be given any configuration by attaching additional elements... The surface is easy to clean, which allows it to remain aesthetic and presentable for a long time.

Helpful advice! Small scratches and damages on the acrylic surface can be repaired with a special paste.

The disadvantages of the material include deformation, which occurs due to constant loads. This possibility can be eliminated by means of plates fixed under the pallet.

More durable, reliable and durable is the cast iron pallet. The material is able to retain heat for a long time, but it takes time to heat up. The cast iron pallet, in comparison with other materials, is characterized by a democratic cost. Such products are distinguished by their high weight and shape identity. On contact with water, a characteristic noise is produced. Over time, chips and cracks form on a product covered with enamel, as a result of which the surface needs to be restored.

Steel pallets are stronger than acrylic and lighter than cast iron. The material retains heat well, but in some properties it is inferior to cast iron products. The surface of the pallet is slippery, so you should choose corrugated products or underlay a rubber mat. Steel pallets are covered with enamel, the quality of which determines their durability. Products lose in sound insulation cast iron.

Ceramic pallets are reliable, durable, with a high degree of sound absorption, undemanding in maintenance, and retain heat for a long time. Such products differ from the rest in their presentable appearance. However, the material is characterized by low resistance to damage, high weight and high cost.

The most durable are pallets made of natural stone... You can restore the damaged surface using grinder followed by polishing. The disadvantage is the high cost of the product. For a country house, you can choose a wooden pallet. The material has a pleasant tactile feel. In order for such a pallet to serve for a long time, it is important to properly process the wood and ensure proper care of the product. Different versions of the pallet can be seen in the photo of shower stalls in the bathroom of small and large sizes.

Shower doors and walls: suitable options

The protective elements of shower stalls are made of acrylic or impact-resistant glass. Acrylic doors and walls vary in color and transparency. A decorative film with a pattern can be applied to the surface, which is selected for certain interior premises. The material is demanding in care. Wipe off the surface immediately after each water treatment. Otherwise, stains will remain on it, which cannot be eliminated over time, which will lead to clouding of the structure. You can buy an acrylic shower door in a 100 cm niche from 18 thousand rubles.

Glass surfaces are more hygienic and easier to clean. They do not form fungus and mold. Water quickly flows down the glass without lingering on it and leaving no traces. The material does not become cloudy over time. Such surfaces are resistant to damage, since they are manufactured under the influence of high temperatures. Glass shower cubicles look presentable and luxurious, giving the interior of the room a special cozy atmosphere. The greatest demand is for shower doors in the Cezares niche, which can be bought from 15 thousand rubles.

There are budget models of shower stalls, in which the enclosing elements are made of plastic. The material is resistant to moisture and has a low weight, but it is demanding in care and has a short service life. The surface is matte or transparent.

The doors in the booth can be sliding, hinged, pivoting, folding, have two or four leaves. The first option provides maximum tightness in the closed position and does not require free space for opening. For swing doors, additional space will be required, which is not cluttered with various elements and accessories.

Helpful advice! If chosen swing doors, and the inner area of ​​the bath does not have free space, the doors can open inside the cubicle.

It will look original and stylish, the walls of which are made of glass blocks

For confined spaces, pivoting structures are ideal, which open with a hinge that moves along a special guide. Such doors move easily and smoothly. The folding type, or the door-book, turns into a compact accordion and opens to the inside of the booth. It is often used in conjunction with sliding doors. In the photo of small bathrooms with a shower cabin, you can see different variations of the enclosing structures.

Optimal bathroom layout with shower

To create a cozy and comfortable room it is important to organize the space correctly, arranging all its elements taking into account their sizes. For this purpose, a bathroom plan is drawn up. In addition to a shower stall, a washbasin, a washing machine, a mirror with a wardrobe and a toilet (in the case of a combined bathroom) should be placed in the room.

Important! All doors must open without hindrance, while a free space with a width of at least 40 cm must be organized for the passage.

For small apartments, a combined bathroom with a shower stall is often performed. The structure usually occupies an area of ​​at least 1 m². You can additionally save space by installing a hinged sink and toilet. It is recommended to organize a cabinet under the washbasin for various bath accessories.

Exists various options layout of a small bathroom. In a square room, the shower stall is located in the corner. A washbasin is installed next to it. A toilet bowl is placed opposite the booth, if possible, closed by a partition. V rectangular rooms the cubicle can be installed along one wide wall, opposite to which there is a toilet and a sink. In narrow rooms, plumbing fixtures should be placed along one of the long walls.

Preparation of premises and installation of utilities

After the layout of the room has been drawn up, you can start dismantling the bathroom items and preparing its elements, while removing the old finishing materials. The price of repairing a bathroom with a shower will be determined by the dimensions of the room, the volume dismantling works and laboriousness of surface finishing.

Important! In the case of combining a bath and a toilet, the demolition of the partition must be agreed with the regulatory authorities.

The next step is the wiring of the necessary engineering communications for a new plumbing equipment... Plumbing. For this, strobes are made, where communications are laid. This solution will save space. Sewer and water pipes located in the corner of the room can be hidden in a drywall box. If they are placed in the central part of the wall, then you can disguise them behind a plasterboard wall with an elegant shutter door.

Particular attention should be paid to the option of connecting the shower to the sewer. For pallets with a low location of the drain pipe, you will either have to bury the drain pipe into the floor, or raise the booth to a certain height. You can lift the pallet using special adjustable feet or mount a brick pedestal under it.

An important event is the new wiring. The cable, enclosed in a corrugated pipe, is hidden in the wall. For the bathroom, you should purchase sockets with increased moisture resistance. After laying all communications, the grooves are filled with a cement-sand or gypsum mixture.

An important preparatory measure is the waterproofing of all surfaces of the room. Particular attention is paid to the places where the pipes pass. The joints of the walls and the floor must be covered with a special compound to a height of 12-15 cm. In the places where plumbing fixtures are installed, a special sealing tape is glued above the level of the connection points. The entire floor surface is covered with a waterproofing compound.

Helpful advice! When emergency in order to exclude the possibility of water leakage outside the bathroom, it is recommended to equip the door with a threshold and waterproof it.

Wall cladding when creating a bathroom design with a shower

Ceramic tiles are mainly used to decorate the walls of a room with a shower. The material is characterized by increased resistance to moisture and aggressive detergents. In addition, it is environmentally friendly, practical and durable. Today, shower tiles are presented in a wide range of color variations and a variety of designs, which makes it possible to choose the material for any interior style.

Tiles can be monochromatic, with ornaments, patterns, stained glass, with imitation of wood, stone and mosaic. It has a matte or glossy surface. There are products covered with mother-of-pearl. Tile shapes are rectangular, round, square, octagonal and semicircular. Different options for using the products can be seen in the photo of the interior of the bathroom with a shower.

The tiles are laid different ways, thanks to which you can visually correct the shape of the room. You can visually stretch the walls using vertical masonry. To lengthen the room will help horizontal way mounting elements. Diagonal masonry looks unusual and original. However, in this case, you should take into account the high consumption of material. Interesting experiments in laying tiles can be seen in the photo of tile showers.

Important! Before installing ceramic tiles, the surface must be leveled.

You can decorate the walls of the bath with water-based paint of any color or use several shades that are combined with each other. This is the cheapest finishing option, but it requires an ideal flat base... In the photo of a small bathroom, you can clearly see this type of design.

Another budget, but more interesting option is the cladding of the room with plastic panels. The material is resistant to moisture, but subject to mechanical stress. Among the presented product samples, you can choose monochromatic, colored panels, products with a pattern and imitation of stone and wood.

Helpful advice! To create a reliable and durable coating, the panels should be tightly connected to each other and the joints should be carefully sealed.

Floor cladding options in a bathroom with shower

Ceramic tiles can be used to decorate the bathroom floor. This is especially true for shower stalls with low sides. However, for safe operation of the room, it must have a protective anti-slip coating.

Helpful advice! To create additional comfort in the bathroom, under the ceramic tiles, you can arrange a warm floor.

The floor in a small bathroom with a shower stall (photos of the room design clearly show this) can be covered moisture resistant laminate. This coverage should be used for enclosed cabins with high sides of the pallet. Laminate is a relatively warm material, which adds extra comfort after leaving the shower. The disadvantage of the material is its fragility. However, with proper use and care, the coating can last for many years.

Helpful advice! After laying the laminate is recommended to be treated with a moisture resistant impregnation.

Today, more and more often, a bulk polymer or epoxy floor is chosen for finishing the bathroom floor. This coating can be used for any type of shower stalls with different pallet heights. The floor has two functions at the same time: waterproofing and decorative. The main disadvantages are the high cost of the material and the need to attract a specialist for its installation.

Another expensive but respectable coating is porcelain stoneware. It is durable, durable material, which is resistant to mechanical stress and is able to withstand any stress. He might be different colors and imitations. The most popular is marbled porcelain stoneware. Such a surface will look luxurious, which is clearly shown in the photo of the bathroom design with a shower cabin.

Bathroom ceiling material

Bathroom ceiling can be trimmed various materials: plastic panels, tiles, paint. The latter option is the cheapest, but you should be aware that the surface must be perfectly flat before applying paint. It is recommended to use silicate, silicone or latex paint for the bathroom. A single-colored painted ceiling can be the basis for applying a color gradient or an original pattern, making the room exclusive and unique. Interesting design ideas are presented in the photo of the interior of the bathroom with a shower.

PVC panels can be attached directly to the ceiling or frame wooden crate... It is advisable to use them on uneven surfaces. The result is an even coating. The material is presented in a wide variety of colors and patterns. You can choose samples with imitation of ceramic tiles, wood texture, natural stone structure, metal surface. Clearly different variants the interior of the room are shown in the photo of the design of a small bathroom with a shower in Khrushchev.

The stretch ceiling is very popular today. There will be no seams left after installation on the ceiling. The main advantage of the design is its ability to withstand up to 100 kg of weight. Such a ceiling will hide all flaws and surface errors, and also prevent the consequences of flooding by neighbors from above. Another advantage of this solution is the additional insulation of the room. Today you can choose any color of the ceiling that will fit into the chosen design. Original solutions shown in the photo of the bathroom design.

Design of a small bathroom with a shower

When organizing the space of small rooms, it is important to take into account every centimeter of free space. For such rooms, the most preferred option are shower enclosures with sliding doors, which allows one corner to be used, making room for other interior elements. Such zoning of space is shown in the photo of the design of a small bathroom of 4 sq. m with shower and washing machine.

The presence of a niche will allow you to equip a built-in shower cabin with a sliding door type. With this option, it is important to properly organize the supply of all engineering communications to the product. If there is a lack of space, the walls of the shower stall can be used to arrange clothes hangers or mini-shelves.

For confined spaces, preference should be given transparent options booths or painted in bright hues... Partitions made of corrugated, tinted glass or plexiglass with a discreet pattern will look elegant and original. The pallet should be of medium depth so as not to overload the interior. It is recommended to decorate the room in a light color palette.

Glossy or semi-glossy ceramic tiles with reflective elements will look harmonious. Large drawings should not be used. A shower room made of mosaics or traditional tiles with geometric patterns of vertical orientation looks most harmonious. You can add contrast by completing a dark floor and choosing bright interior accessories. These can be colored floor rugs, towels, or patterned curtains.

Helpful advice! When decorating small bathrooms, it is not recommended to use more than three colors, so as not to overload the space.

When decorating a bathroom with plastic panels, you should give preference to elements of a blue, blue or aquamarine shade, which will add depth to the room.

A prerequisite for small bathrooms is the presence of mirrors that can visually expand the area. The maximum effect can be achieved by making a mirrored ceiling. In order for the structure to completely “dissolve” in the room, it must have transparent, non-profile surfaces floating in the air. Frosted glass surfaces will help fill the room with light, which can be used to decorate one of the bathroom walls, which is clearly shown in the photo of the bathroom options.

Large bathroom with shower: design options

When creating a beautiful interior for a large bathroom, you do not have to sacrifice the necessary elements of the room in order to install a multifunctional booth. Quite often the structure is positioned in a corner to provide the best ergonomics. Zonal division of space creates a row additional opportunities, at the same time making the room cozy and comfortable, eliminating the feeling of a pile of things. You can delimit the territory for water procedures, a bathroom, storage systems for accessories.

The interior of the bathroom with a round shower cabin installed in the center of the room will look original and unusual. A special color will be created by a transparent glass multifunctional structure, which is equipped with multi-colored illumination.

Along one of the walls, you can place a combined cubicle with a shower sliding door into a 120 cm niche, organizing an additional jacuzzi. Floor cabinets or pencil cases can be placed around the perimeter of the room.

There are no color restrictions for a spacious room. Here you can safely choose dark gray, chocolate, rich burgundy surfaces, which must be diluted with light blotches or mosaics. Indoor flowers will help to breathe a natural aroma into the atmosphere of a spacious room, which is proved by photos of the design of a bathroom with a shower.

Bathroom color scheme with shower

The chosen color palette plays a significant role in the design of the room. This is especially important for small spaces. When decorating a small bathroom design, you should use exclusively light pastel colors, which are diluted with bright accessories. A room made in white, cream or milky will seem airy and weightless. You can add clarity of lines to the room with the help of chrome plumbing elements and fittings.

All shades of blue, purple, peach, pearl, silver, pink, lavender and blue will also be a good solution for a small space. It is recommended to decorate the uniformity of surfaces with decorative inserts with ornaments or drawings. In a bright design, you can decorate one of the walls of the room, which is clearly shown in the photo of the design of the combined bathroom with shower.

Terracotta colors will help you get a warm, relaxing atmosphere in the room. You can dilute the sparkling red color with white borders, ceiling and other interior elements.

Helpful advice! To keep the room from looking dull and gloomy, it is important to take care of intense lighting.

Rooms decorated in the contrast of purple and yellow, red and white, yellow and blue, red and gray will look original, which is clearly shown in the photo of the design of small bathrooms with a shower.

For spacious rooms, you can safely use black. It will look especially stylish in marble. Dark tones can be found in large wall ornaments, flooring patterns, or edging. It's easy to get a dramatic, catchy and vibrant bathroom with a red palette. A soothing and relaxing environment will be created by the frosted glass surfaces of the shower stall and the snow-white sanitary ware. It will be possible to avoid excessive aggressiveness when using a large amount of light.

A small bathroom with a shower cabin in a yellow or orange palette, complemented by glass or mirrored surfaces, looks cheerful and sunny. In order for the room to sparkle with bright colors, it is important to organize intense warm lighting.

Bathroom design with shower: photos of rooms in different styles

The style of the bathroom interior with a shower cabin will determine the atmosphere in the room, which can be calm and light or bright and dynamic. Since the shower stall is a fresh trend, the interior should be decorated in modern trends. Classic design in such a situation, it is much more difficult to create.

For a small room, the most suitable options are hi-tech, Japanese style or minimalism. Hi-tech requires a large number of mirror and glass surfaces, a minimum of interior elements and accessories. The Japanese style is characterized by the use of natural materials for interior decoration. The room should be decorated in a neutral palette. It is recommended to dilute the interior of the shower room with sakura twigs or hieroglyphs.

You can embody the direction of minimalism through black and white colors in the decoration of the room. The room should not be overloaded with decorative elements and unnecessary furniture. Smooth glossy surfaces should prevail here. The shower stall is made of plastic or glass and has a simple outline.

The eco style is suitable for adherents of naturalism. In the decoration of the premises, they are used exclusively natural materials such as wood and stone. Light calm natural color scheme should dissolve in abundant warm lighting. Clearly different design options can be seen in the photo of a small bathroom design.

In a small room, a marine style will also look organic. It uses blue and white surfaces, decorative elements reminiscent of the sea, transparent doors and flowing curtains.

For spacious premises fit direction loft and provence. The first option will help to get room for creative ideas. In this case, it is recommended to reconnect the rough surface finishes with stylish interior accessories and art objects. The premises are decorated in gray, blue, beige colors with a metallic sheen. The use of concrete surfaces and masonry is typical. For such a design, old, rare inserts that remind of the last century will be appropriate. Unusual bathroom design options are clearly demonstrated in the photo.

Provence style will help to fill the room with air, freshness and floral aroma. The design is characterized by the use of natural shades found in nature: white, vanilla, lavender, yellow, turquoise, olive. The highlight of the room will be blotches of burnt-out flowers, artificially aged surfaces. All the naturalness of the style can be seen in the photo of beautiful bathroom interiors.

The shower cubicle is a must-have element in modern bathrooms. It is not only a multifunctional design, thanks to which it can be recreated in own home A spa room, but also a stylish element of the interior. Modern assortment implies models of different sizes, shapes and designs, which makes it possible to choose a product that meets all the stated requirements. A properly designed room interior will help to recreate a warm, cozy, pacifying atmosphere, which will help you relax and tune in to a positive mood after a hard day at work.

A shower cabin in a small bathroom can be the best option for arranging this small room. Such a solution can combine a bathroom and a washing room in a small room. At the same time, the space will not be overloaded, and the opportunity for an elegant design is created. Aesthetic look and comfort can be ensured by purchasing a ready-made shower set, or do it yourself.

The essence of the problem

A small bathroom, combined with a toilet, is not considered a rarity in our time. This "legacy" of the Soviet era sharply reduces comfort, and to put washing machine just nowhere. Even turning around in such a room is difficult.

Shower cabin

The question arises as to whether a small sit-down bathtub is needed. If, in such conditions, a shower cabin is installed instead of a bath, then this small room will visually expand, and the washing process will be much more comfortable.

The use of shower cabins for small bathrooms has the following positive aspects:

• it is possible to install additional equipment(bidet, washing machine);
• the tightness of the cabin does not allow splashing water, which reduces the moisture of the floor covering;
• modern shower cabins are capable of performing additional functions such as hydromassage, contrast shower, aromatherapy;
• you can install cabins with a deep pallet, which can be used as a baby bath;
• the consumption of water in the shower is less than when bathing in the bath;
• standard designs eliminate the risk of injury as a result of slipping bare feet;
• the possibility of decorating a room in an elegant design is created.

When deciding whether to install a shower instead of a bath, one should also take into account the disadvantages of such a system:

• the absence of a bath implies limitations in the washing procedure: in such conditions, a hot or medicinal bath is impossible;
• with a low pressure, thieves in the line limit the additional functions of the shower;
• shower cubicle requires more thorough, daily care and cleaning.

The installation of a shower stall depends on the habits of the owners. If a person cannot imagine life without lying in a bathtub, then, of course, he will give preference to it even to the detriment of space. However, modern fashion has a strong trend towards shower use.

As a rule, in a small city apartment, the owners try to install a shower cubicle purchased in a specialized store with manufacturer's warranties. These multifunctional systems provide hygiene comfort and proper design. However, the cost of such structures, even in a small-sized version, is high and not affordable for many Khrushchev owners.

You can reduce costs if you make showers in small baths with your own hands. In general, the home-made technology is simple and accessible to anyone. And the correct choice of facing material allows you to ensure an elegant design of the room.

What options are used?

In small baths, 2 main types of shower cabins are installed: closed and open. The last variety is lightweight construction since instead of the walls, curtains are used, which are pulled only during the shower. Closed type is a capital structure that is completely isolated from the room, and the entrance to the inside is through the door.

Closed shower

According to the installation method, the following options differ: corner and wall cabin, as well as a design that is not connected to the bath wall (free-standing). A small square bathroom is most often equipped with a corner shower. It is better to equip rectangular, elongated rooms with a wall structure that rests on a flat section of the bathroom wall.

Corner shower

Small rooms with free-standing shower stalls are extremely rare. A do-it-yourself shower stall may differ from all of the listed options when mounted in niches. In this case, you only need to equip the entrance to the shower room, and the walls are used ready-made, but after the mandatory imposition of waterproofing.

Open shower

How is the size of the booth chosen? This choice is influenced by the size and shape of the room, the presence of a bathroom and its location, the placement of technical communications. When installing the cab, you should take into account the recommendations:

• free space in front of the shower must be at least 65x80 cm;
• the distance between plumbing equipment (sink, toilet) and shower must be more than 0.3 m;
• when placing a shower cabin on a wall with a door, the distance to it should be at least 20 cm.

The minimum dimensions of the cabin are determined based on the following conditions: free entry and placement inside, freedom of movement with hands when washing, the ability to tilt the body. The most popular are small-sized cabins 80x80 and 80x90 cm in size. In very small rooms, 70x70 cm structures are installed. However, all family members should check their placement in them.

Structural elements

Shower enclosures of different types may differ significantly in shape and design, but all include such required elements: water inlet, sewer drain, plumbing equipment (shower spray, mixer, function control panel), drain pan, walls with waterproofing.

Wall-mounted booth

Wall-mounted cab options, as a rule, have rectangular shape or a slight rounding of the front side. Corner structures should be configured to make optimal use of the corner of the room. The most common shape is a quarter circle. In rare cases, square and triangular varieties are used.

The pallet design also plays an important role. Its side can have different heights. So a pallet with a high side, when closing the drain hole, can serve as a bath in which you can wash your feet or bathe your child.

The cab door can be a stumbling block. If you use the swing option, then it needs an extra area in front of the shower. Sliding or folding doors allow you to save space in the bathroom. A sliding system is often used, when a door in the form of one or two leaves is shifted to the sides along the walls along special runners. Folding door leaves are folded accordion-like.

Cab placement principles

The question of how best to arrange the shower stall is decided separately in each case. The installation location depends on the configuration of the bathroom. However, in any case, the shower cabin should be located near communications: water supply, sewage, ventilation system.

In a small square bathroom, the corner cabin is best suited. The most typical schemes are:

• when the front door is located in the middle part of the wall, the shower cabin can be mounted in one of two corners on the opposite wall;
• when the door is offset to the edge of a wall, the best shower location is a corner on the same wall.

The elongated rectangular bathroom with shower has a slightly different look. In this case, a wall structure is often installed, for example, 70x90 or 80x90 cm in size. So, when the entrance door is located in the middle part of the elongated wall, the cabin is mounted along the shorter walls. When the door faces the edge of a short wall, 2 patterns are most often applied: a corner structure on the opposite side or a back-to-wall booth along a further elongated wall.

Finishing elements

The small space of the room has nuances that should be taken into account when decorating the overall interior. The correct choice of finishing materials plays an important role. The main task of arranging a small bathroom with a shower is visual expansion space, for which the following options can be recommended: